diff options
| author | Tom Rini <trini@konsulko.com> | 2022-05-26 13:36:17 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2022-06-06 12:09:28 -0400 |
| commit | 23780398b587ac8bc912971c60cd816bd1afeb12 (patch) | |
| tree | 5710c91b0a891c590826da0137230a09d819c99a /doc/imx/common | |
| parent | f113d7d3034672de7d074506a05a7055f1f0dcae (diff) | |
| download | u-boot-23780398b587ac8bc912971c60cd816bd1afeb12.tar.gz u-boot-23780398b587ac8bc912971c60cd816bd1afeb12.tar.bz2 u-boot-23780398b587ac8bc912971c60cd816bd1afeb12.zip | |
imx6: Update CONFIG_SPL_STACK defaults in Kconfig
Update the Kconfig entry to have the correct defaults for i.MX6
platforms, and move the existing large comment from imx6_spl.h to
doc/imx/common/imx6.txt so that it's not lost.
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'doc/imx/common')
| -rw-r--r-- | doc/imx/common/imx6.txt | 31 |
1 files changed, 31 insertions, 0 deletions
diff --git a/doc/imx/common/imx6.txt b/doc/imx/common/imx6.txt index 9007cfbf58..c5554d8d6b 100644 --- a/doc/imx/common/imx6.txt +++ b/doc/imx/common/imx6.txt @@ -162,3 +162,34 @@ icorem6qdl> nand write ${loadaddr} uboot ${filesize} NAND write: device 0 offset 0x200000, size 0x8fd26 589094 bytes written: OK icorem6qdl> + +SPL Stack size and location notes +--------------------------------- + +If we have CONFIG_MX6_OCRAM_256KB then see Figure 8.4.1 in IMX6DQ Reference +manuals: + - IMX6DQ OCRAM (IRAM) is from 0x00907000 to 0x0093FFFF + - BOOT ROM stack is at 0x0093FFB8 + - if icache/dcache is enabled (eFuse/strapping controlled) then the + IMX BOOT ROM will setup MMU table at 0x00938000, therefore we need to + fit between 0x00907000 and 0x00938000. + - Additionally the BOOT ROM loads what they consider the firmware image + which consists of a 4K header in front of us that contains the IVT, DCD + and some padding thus 'our' max size is really 0x00908000 - 0x00938000 + or 192KB + - Pad SPL to 196KB (4KB header + 192KB max size). This allows to write the + SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a + boot media (given that boot media specific offset is configured properly). +and if we don't, see Figure 8-3 in IMX6SDL Reference manuals: + - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF + - BOOT ROM stack is at 0x0091FFB8 + - if icache/dcache is enabled (eFuse/strapping controlled) then the + IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to + fit between 0x00907000 and 0x00918000. + - Additionally the BOOT ROM loads what they consider the firmware image + which consists of a 4K header in front of us that contains the IVT, DCD + and some padding thus 'our' max size is really 0x00908000 - 0x00918000 + or 64KB + - Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the + SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a + boot media (given that boot media specific offset is configured properly). |