doc: Update CapsuleUpdate READMEs

Since we removed embeddingg the capsule key into a .dtb and fixed
authenticated capsule updates for all boards, move the relevant
documentation in the efi file and update it accordingly

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

1 files changed, 0 insertions, 203 deletions

diff --git a/doc/board/emulation/qemu_capsule_update.rst b/doc/board/emulation/qemu_capsule_update.rst
deleted file mode 100644
index 0a2286d039..0000000000
--- a/doc/board/emulation/qemu_capsule_update.rst
+++ /dev/null
@@ -1,203 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-.. Copyright (C) 2020, Linaro Limited
-
-Enabling UEFI Capsule Update feature
-------------------------------------
-
-Support has been added for the UEFI capsule update feature which
-enables updating the U-Boot image using the UEFI firmware management
-protocol (fmp). The capsules are not passed to the firmware through
-the UpdateCapsule runtime service. Instead, capsule-on-disk
-functionality is used for fetching the capsule from the EFI System
-Partition (ESP) by placing the capsule file under the
-\EFI\UpdateCapsule directory.
-
-Currently, support has been added on the QEMU ARM64 virt platform for
-updating the U-Boot binary as a raw image when the platform is booted
-in non-secure mode, i.e. with CONFIG_TFABOOT disabled. For this
-configuration, the QEMU platform needs to be booted with
-'secure=off'. The U-Boot binary placed on the first bank of the NOR
-flash at offset 0x0. The U-Boot environment is placed on the second
-NOR flash bank at offset 0x4000000.
-
-The capsule update feature is enabled with the following configuration
-settings::
-
-    CONFIG_MTD=y
-    CONFIG_FLASH_CFI_MTD=y
-    CONFIG_CMD_MTDPARTS=y
-    CONFIG_CMD_DFU=y
-    CONFIG_DFU_MTD=y
-    CONFIG_PCI_INIT_R=y
-    CONFIG_EFI_CAPSULE_ON_DISK=y
-    CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT=y
-    CONFIG_EFI_CAPSULE_FIRMWARE=y
-    CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
-    CONFIG_EFI_CAPSULE_FMP_HEADER=y
-
-In addition, the following config needs to be disabled(QEMU ARM specific)::
-
-    CONFIG_TFABOOT
-
-The capsule file can be generated by using the tools/mkeficapsule::
-
-    $ mkeficapsule --raw <u-boot.bin> --index 1 <capsule_file_name>
-
-As per the UEFI specification, the capsule file needs to be placed on
-the EFI System Partition, under the \EFI\UpdateCapsule directory. The
-EFI System Partition can be a virtio-blk-device.
-
-Before initiating the firmware update, the efi variables BootNext,
-BootXXXX and OsIndications need to be set. The BootXXXX variable needs
-to be pointing to the EFI System Partition which contains the capsule
-file. The BootNext, BootXXXX and OsIndications variables can be set
-using the following commands::
-
-    => efidebug boot add -b 0 Boot0000 virtio 0:1 <capsule_file_name>
-    => efidebug boot next 0
-    => setenv -e -nv -bs -rt -v OsIndications =0x04
-    => saveenv
-
-Finally, the capsule update can be initiated with the following
-command::
-
-    => efidebug capsule disk-update
-
-The updated U-Boot image will be booted on subsequent boot.
-
-Enabling Capsule Authentication
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The UEFI specification defines a way of authenticating the capsule to
-be updated by verifying the capsule signature. The capsule signature
-is computed and prepended to the capsule payload at the time of
-capsule generation. This signature is then verified by using the
-public key stored as part of the X509 certificate. This certificate is
-in the form of an efi signature list (esl) file, which is embedded as
-part of the platform's device tree blob using the mkeficapsule
-utility.
-
-On the QEMU virt platforms, the device-tree is generated on the fly
-based on the devices configured. This device tree is then passed on to
-the various software components booting on the platform, including
-U-Boot. Therefore, on the QEMU virt platform, the signatute is
-embedded on an overlay. This overlay is then applied at runtime to the
-base platform device-tree. Steps needed for embedding the esl file in
-the overlay are highlighted below.
-
-The capsule authentication feature can be enabled through the
-following config, in addition to the configs listed above for capsule
-update::
-
-    CONFIG_EFI_CAPSULE_AUTHENTICATE=y
-
-The public and private keys used for the signing process are generated
-and used by the steps highlighted below::
-
-    1. Install utility commands on your host
-       * OPENSSL
-       * efitools
-
-    2. Create signing keys and certificate files on your host
-
-        $ openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=CRT/ \
-            -keyout CRT.key -out CRT.crt -nodes -days 365
-        $ cert-to-efi-sig-list CRT.crt CRT.esl
-
-        $ openssl x509 -in CRT.crt -out CRT.cer -outform DER
-        $ openssl x509 -inform DER -in CRT.cer -outform PEM -out CRT.pub.pem
-
-        $ openssl pkcs12 -export -out CRT.pfx -inkey CRT.key -in CRT.crt
-        $ openssl pkcs12 -in CRT.pfx -nodes -out CRT.pem
-
-The capsule file can be generated by using the GenerateCapsule.py
-script in EDKII::
-
-    $ ./BaseTools/BinWrappers/PosixLike/GenerateCapsule -e -o \
-      <capsule_file_name> --monotonic-count <val> --fw-version \
-      <val> --lsv <val> --guid \
-      e2bb9c06-70e9-4b14-97a3-5a7913176e3f --verbose \
-      --update-image-index <val> --signer-private-cert \
-      /path/to/CRT.pem --trusted-public-cert \
-      /path/to/CRT.pub.pem --other-public-cert /path/to/CRT.pub.pem \
-      <u-boot.bin>
-
-Place the capsule generated in the above step on the EFI System
-Partition under the EFI/UpdateCapsule directory
-
-For embedding the public key certificate, the following steps need to
-be followed::
-
-    1. Generate a skeleton overlay dts file, with a single fragment
-       node and an empty __overlay__ node
-
-       A typical skeleton overlay file will look like this
-
-       /dts-v1/;
-       /plugin/;
-
-       / {
-               fragment@0 {
-                       target-path = "/";
-                       __overlay__ {
-                       };
-               };
-       };
-
-
-    2. Convert the dts to a corresponding dtb with the following
-       command
-        ./scripts/dtc/dtc -@ -I dts -O dtb -o <ov_dtb_file_name> \
-        <dts_file>
-
-    3. Run the dtb file generated above through the mkeficapsule tool
-       in U-Boot
-        ./tools/mkeficapsule -O <pub_key.esl> -D <ov_dtb>
-
-Running the above command results in the creation of a 'signature'
-node in the dtb, under which the public key is stored as a
-'capsule-key' property. The '-O' option is to be used since the
-public key certificate(esl) file is being embedded in an overlay.
-
-The dtb file embedded with the certificate is now to be placed on an
-EFI System Partition. This would then be loaded and "merged" with the
-base platform flattened device-tree(dtb) at runtime.
-
-Build U-Boot with the following steps(QEMU ARM64)::
-
-    $ make qemu_arm64_defconfig
-    $ make menuconfig
-        Disable CONFIG_TFABOOT
-        Enable CONFIG_EFI_CAPSULE_AUTHENTICATE
-        Enable all configs needed for capsule update(listed above)
-    $ make all
-
-Boot the platform and perform the following steps on the U-Boot
-command line::
-
-    1. Enable capsule authentication by setting the following env
-       variable
-
-        => setenv capsule_authentication_enabled 1
-        => saveenv
-
-    2. Load the overlay dtb to memory and merge it with the base fdt
-
-        => fatload virtio 0:1 <$fdtovaddr> EFI/<ov_dtb_file>
-        => fdt addr $fdtcontroladdr
-        => fdt resize <size_of_ov_dtb_file>
-        => fdt apply <$fdtovaddr>
-
-    3. Set the following environment and UEFI boot variables
-
-        => setenv -e -nv -bs -rt -v OsIndications =0x04
-        => efidebug boot add -b 0 Boot0000 virtio 0:1 <capsule_file_name>
-        => efidebug boot next 0
-        => saveenv
-
-    4. Finally, the capsule update can be initiated with the following
-       command
-
-        => efidebug capsule disk-update
-
-On subsequent reboot, the platform should boot the updated U-Boot binary.