diff options
| author | Mario Six <mario.six@gdsys.cc> | 2019-01-21 09:17:54 +0100 |
|---|---|---|
| committer | Mario Six <mario.six@gdsys.cc> | 2019-05-21 07:52:25 +0200 |
| commit | 21c1502a4a81904706b9883f523ec4a94aba880f (patch) | |
| tree | c04e236d3366a84cdad3b19eb297f33d89d3c283 /configs/kmeter1_defconfig | |
| parent | ff3bb0c435e0d10ccb61a8fd2dada3ae72f1f97e (diff) | |
| download | u-boot-21c1502a4a81904706b9883f523ec4a94aba880f.tar.gz u-boot-21c1502a4a81904706b9883f523ec4a94aba880f.tar.bz2 u-boot-21c1502a4a81904706b9883f523ec4a94aba880f.zip | |
mpc83xx: Kconfig: Migrate HRCW to Kconfig
The HRCW (hardware reset configuration word) is a constant that must be
hard-coded into the boot loader image. So, it must be available at
compile time, and cannot be migrated to the DT mechanism, but has to be
kept in Kconfig.
Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Diffstat (limited to 'configs/kmeter1_defconfig')
| -rw-r--r-- | configs/kmeter1_defconfig | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig index 2bf2c40a63..600a1ad1dc 100644 --- a/configs/kmeter1_defconfig +++ b/configs/kmeter1_defconfig @@ -3,6 +3,15 @@ CONFIG_SYS_TEXT_BASE=0xF0000000 CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y CONFIG_TARGET_KMETER1=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_VCO_DIV_4=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_QUICC_MULT_FACTOR_6=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_LALE_TIMING_EARLIER=y +CONFIG_LDP_PIN_MUX_STATE_0=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_MISC_INIT_R=y |