diff options
| author | Jonas Karlman <jonas@kwiboo.se> | 2024-04-30 15:30:24 +0000 |
|---|---|---|
| committer | Kever Yang <kever.yang@rock-chips.com> | 2024-05-07 15:56:08 +0800 |
| commit | 100f489f58a685222d0e9049bd8b4990101450d4 (patch) | |
| tree | 239e9a6ccecdf178bdc7157bc1b11a1755be5c86 /configs/ficus-rk3399_defconfig | |
| parent | fa903919d23fb2467730e864321180f7442d6d71 (diff) | |
| download | u-boot-100f489f58a685222d0e9049bd8b4990101450d4.tar.gz u-boot-100f489f58a685222d0e9049bd8b4990101450d4.tar.bz2 u-boot-100f489f58a685222d0e9049bd8b4990101450d4.zip | |
rockchip: rk3399: Fix loading FIT from SD-card when booting from eMMC
When RK3399 boards run SPL from eMMC and fail to load FIT from eMMC due
to it being missing or checksum validation fails there can be a fallback
to read FIT from SD-card. However, without proper pinctrl configuration
reading FIT from SD-card may fail:
U-Boot SPL 2024.04-rc4 (Mar 17 2024 - 22:54:45 +0000)
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
Trying to boot from MMC1
Card did not respond to voltage select! : -110
mmc_init: -95, time 12
spl: mmc init failed with error: -95
SPL: failed to boot from all boot devices (err=-6)
### ERROR ### Please RESET the board ###
Fix this by tagging related sdhci, sdmmc and spi flash pinctrl nodes
with bootph props. Also move bootph for common nodes shared by all
boards to the SoC u-boot.dtsi.
eMMC, SD-Card and SPI flash nodes are also changed to only be tagged
with bootph props for SPL and U-Boot pre-reloc phases.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Diffstat (limited to 'configs/ficus-rk3399_defconfig')
| -rw-r--r-- | configs/ficus-rk3399_defconfig | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig index 3bcd0fd66b..f4e3ebba8f 100644 --- a/configs/ficus-rk3399_defconfig +++ b/configs/ficus-rk3399_defconfig @@ -25,7 +25,7 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y CONFIG_SPL_OF_CONTROL=y -CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_DEV=1 |