New implementation for internal handling of environment variables.

Motivation:

* Old environment code used a pessimizing implementation:
  - variable lookup used linear search => slow
  - changed/added variables were added at the end, i. e. most
    frequently used variables had the slowest access times => slow
  - each setenv() would calculate the CRC32 checksum over the whole
    environment block => slow
* "redundant" envrionment was locked down to two copies
* No easy way to implement features like "reset to factory defaults",
  or to select one out of several pre-defined (previously saved) sets
  of environment settings ("profiles")
* No easy way to import or export environment settings

======================================================================

API Changes:

- Variable names starting with '#' are no longer allowed

  I didn't find any such variable names being used; it is highly
  recommended to follow standard conventions and start variable names
  with an alphanumeric character

- "printenv" will now print a backslash at the end of all but the last
  lines of a multi-line variable value.

  Multi-line variables have never been formally defined, allthough
  there is no reason not to use them. Now we define rules how to deal
  with them, allowing for import and export.

- Function forceenv() and the related code in saveenv() was removed.
  At the moment this is causing build problems for the only user of
  this code (schmoogie - which has no entry in MAINTAINERS); may be
  fixed later by implementing the "env set -f" feature.

Inconsistencies:

- "printenv" will '\\'-escape the '\n' in multi-line variables, while
  "printenv var" will not do that.

======================================================================

Advantages:

- "printenv" output much better readable (sorted)
- faster!
- extendable (additional variable properties can be added)
- new, powerful features like "factory reset" or easy switching
  between several different environment settings ("profiles")

Disadvantages:

- Image size grows by typically 5...7 KiB (might shrink a bit again on
  systems with redundant environment with a following patch series)

======================================================================

Implemented:

- env command with subcommands:

  - env print [arg ...]

    same as "printenv": print environment

  - env set [-f] name [arg ...]

    same as "setenv": set (and delete) environment variables

    ["-f" - force setting even for read-only variables - not
    implemented yet.]

  - end delete [-f] name

    not implemented yet

    ["-f" - force delete even for read-only variables]

  - env save

    same as "saveenv": save environment

  - env export [-t | -b | -c] addr [size]

    export internal representation (hash table) in formats usable for
    persistent storage or processing:

	-t:	export as text format; if size is given, data will be
		padded with '\0' bytes; if not, one terminating '\0'
		will be added (which is included in the "filesize"
		setting so you can for exmple copy this to flash and
		keep the termination).
	-b:	export as binary format (name=value pairs separated by
		'\0', list end marked by double "\0\0")
	-c:	export as checksum protected environment format as
		used for example by "saveenv" command
	addr:	memory address where environment gets stored
	size:	size of output buffer

	With "-c" and size is NOT given, then the export command will
	format the data as currently used for the persistent storage,
	i. e. it will use CONFIG_ENV_SECT_SIZE as output block size and
	prepend a valid CRC32 checksum and, in case of resundant
	environment, a "current" redundancy flag. If size is given, this
	value will be used instead of CONFIG_ENV_SECT_SIZE; again, CRC32
	checksum and redundancy flag will be inserted.

	With "-b" and "-t", always only the real data (including a
	terminating '\0' byte) will be written; here the optional size
	argument will be used to make sure not to overflow the user
	provided buffer; the command will abort if the size is not
	sufficient. Any remainign space will be '\0' padded.

        On successful return, the variable "filesize" will be set.
        Note that filesize includes the trailing/terminating '\0'
        byte(s).

        Usage szenario: create a text snapshot/backup of the current
	settings:

		=> env export -t 100000
		=> era ${backup_addr} +${filesize}
		=> cp.b 100000 ${backup_addr} ${filesize}

	Re-import this snapshot, deleting all other settings:

		=> env import -d -t ${backup_addr}

  - env import [-d] [-t | -b | -c] addr [size]

    import external format (text or binary) into hash table,
    optionally deleting existing values:

	-d:	delete existing environment before importing;
		otherwise overwrite / append to existion definitions
	-t:	assume text format; either "size" must be given or the
		text data must be '\0' terminated
	-b:	assume binary format ('\0' separated, "\0\0" terminated)
	-c:	assume checksum protected environment format
	addr:	memory address to read from
	size:	length of input data; if missing, proper '\0'
		termination is mandatory

  - env default -f

    reset default environment: drop all environment settings and load
    default environment

  - env ask name [message] [size]

    same as "askenv": ask for environment variable

  - env edit name

    same as "editenv": edit environment variable

  - env run

    same as "run": run commands in an environment variable

======================================================================

TODO:

- drop default env as implemented now; provide a text file based
  initialization instead (eventually using several text files to
  incrementally build it from common blocks) and a tool to convert it
  into a binary blob / object file.

- It would be nice if we could add wildcard support for environment
  variables; this is needed for variable name auto-completion,
  but it would also be nice to be able to say "printenv ip*" or
  "printenv *addr*"

- Some boards don't link any more due to the grown code size:
  DU405, canyonlands, sequoia, socrates.

	=> cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>,
	       Stefan Roese <sr@denx.de>,
	       Heiko Schocher <hs@denx.de>

- Dropping forceenv() causes build problems on schmoogie

	=> cc: Sergey Kubushyn <ksi@koi8.net>

- Build tested on PPC and ARM only; runtime tested with NOR and NAND
  flash only => needs testing!!

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>,
Cc: Stefan Roese <sr@denx.de>,
Cc: Heiko Schocher <hs@denx.de>
Cc: Sergey Kubushyn <ksi@koi8.net>

1 files changed, 73 insertions, 59 deletions

diff --git a/common/env_sf.c b/common/env_sf.c
index 4391d61fc1..fb0c39b3ce 100644
--- a/common/env_sf.c
+++ b/common/env_sf.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2010
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
@@ -29,6 +29,8 @@
 #include <environment.h>
 #include <malloc.h>
 #include <spi_flash.h>
+#include <search.h>
+#include <errno.h>
 
 #ifndef CONFIG_ENV_SPI_BUS
 # define CONFIG_ENV_SPI_BUS	0
@@ -77,17 +79,29 @@ void swap_env(void)
 
 int saveenv(void)
 {
-	u32 saved_size, saved_offset;
-	char *saved_buffer = NULL;
-	u32 sector = 1;
-	int ret;
-	char flag = OBSOLETE_FLAG, new_flag = ACTIVE_FLAG;
+	env_t	env_new;
+	ssize_t	len;
+	char	*res;
+	u32	saved_size, saved_offset;
+	char	*saved_buffer = NULL;
+	u32	sector = 1;
+	int	ret;
+	char	flag = OBSOLETE_FLAG, new_flag = ACTIVE_FLAG;
 
 	if (!env_flash) {
 		puts("Environment SPI flash not initialized\n");
 		return 1;
 	}
 
+	res = (char *)&env_new.data;
+	len = hexport('\0', &res, ENV_SIZE);
+	if (len < 0) {
+		error("Cannot export environment: errno = %d\n", errno);
+		return 1;
+	}
+	env_new.crc   = crc32(0, env_new.data, ENV_SIZE);
+	env_new.flags = ACTIVE_FLAG;
+
 	/* Is the sector larger than the env (i.e. embedded) */
 	if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
 		saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE;
@@ -118,25 +132,25 @@ int saveenv(void)
 	puts("Writing to SPI flash...");
 	ret = spi_flash_write(env_flash,
 		env_new_offset + offsetof(env_t, data),
-		sizeof(env_ptr->data), env_ptr->data);
+		sizeof(env_new.data), env_new.data);
 	if (ret)
 		goto done;
 
 	ret = spi_flash_write(env_flash,
 		env_new_offset + offsetof(env_t, crc),
-		sizeof(env_ptr->crc), &env_ptr->crc);
+		sizeof(env_new.crc), &env_new.crc);
 	if (ret)
 		goto done;
 
 	ret = spi_flash_write(env_flash,
 		env_offset + offsetof(env_t, flags),
-		sizeof(env_ptr->flags), &flag);
+		sizeof(env_new.flags), &flag);
 	if (ret)
 		goto done;
 
 	ret = spi_flash_write(env_flash,
 		env_new_offset + offsetof(env_t, flags),
-		sizeof(env_ptr->flags), &new_flag);
+		sizeof(env_new.flags), &new_flag);
 	if (ret)
 		goto done;
 
@@ -164,33 +178,34 @@ void env_relocate_spec(void)
 	int crc1_ok = 0, crc2_ok = 0;
 	env_t *tmp_env1 = NULL;
 	env_t *tmp_env2 = NULL;
+	env_t ep;
 	uchar flag1, flag2;
 	/* current_env is set only in case both areas are valid! */
 	int current_env = 0;
 
 	tmp_env1 = (env_t *)malloc(CONFIG_ENV_SIZE);
-	if (!tmp_env1) {
-		puts("*** Warning: could not init environment,"
-			" using defaults\n\n");
-		goto out;
-	}
-
 	tmp_env2 = (env_t *)malloc(CONFIG_ENV_SIZE);
-	if (!tmp_env2) {
-		puts("*** Warning: could not init environment,"
-			" using defaults\n\n");
-		goto out;
+
+	if (!tmp_env1 || !tmp_env2) {
+		free(tmp_env1);
+		free(tmp_env2);
+		set_default_env("!malloc() failed");
+		return;
 	}
 
 	env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
 			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
-	if (!env_flash)
-		goto err_probe;
+	if (!env_flash) {
+		set_default_env("!spi_flash_probe() failed");
+		return;
+	}
 
 	ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET,
 				CONFIG_ENV_SIZE, tmp_env1);
-	if (ret)
+	if (ret) {
+		set_default_env("!spi_flash_read() failed");
 		goto err_read;
+	}
 
 	if (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc)
 		crc1_ok = 1;
@@ -208,25 +223,25 @@ void env_relocate_spec(void)
 		goto err_crc;
 	else if (crc1_ok && !crc2_ok) {
 		gd->env_valid = 1;
-		memcpy(env_ptr, tmp_env1, CONFIG_ENV_SIZE);
+		ep = tmp_env1;
 	} else if (!crc1_ok && crc2_ok) {
 		gd->env_valid = 1;
-		memcpy(env_ptr, tmp_env2, CONFIG_ENV_SIZE);
+		ep = tmp_env2;
 		swap_env();
 	} else if (flag1 == ACTIVE_FLAG && flag2 == OBSOLETE_FLAG) {
 		gd->env_valid = 1;
-		memcpy(env_ptr, tmp_env1, CONFIG_ENV_SIZE);
+		ep = tmp_env1;
 	} else if (flag1 == OBSOLETE_FLAG && flag2 == ACTIVE_FLAG) {
 		gd->env_valid = 1;
-		memcpy(env_ptr, tmp_env2, CONFIG_ENV_SIZE);
+		ep = tmp_env2;
 		swap_env();
 	} else if (flag1 == flag2) {
 		gd->env_valid = 2;
-		memcpy(env_ptr, tmp_env1, CONFIG_ENV_SIZE);
+		ep = tmp_env1;
 		current_env = 1;
 	} else if (flag1 == 0xFF) {
 		gd->env_valid = 2;
-		memcpy(env_ptr, tmp_env1, CONFIG_ENV_SIZE);
+		ep = tmp_env1;
 		current_env = 1;
 	} else {
 		/*
@@ -234,35 +249,42 @@ void env_relocate_spec(void)
 		 * default path is desirable.
 		 */
 		gd->env_valid = 2;
-		memcpy(env_ptr, tmp_env2, CONFIG_ENV_SIZE);
+		ep = tmp_env2;
 		swap_env();
 		current_env = 2;
 	}
+
+	rc = env_import((char *)ep, 0);
+	if (!rc) {
+		error("Cannot import environment: errno = %d\n", errno);
+		goto out;
+	}
+
 	if (current_env == 1) {
 		if (flag2 != OBSOLETE_FLAG) {
 			flag2 = OBSOLETE_FLAG;
 			spi_flash_write(env_flash,
 				env_new_offset + offsetof(env_t, flags),
-				sizeof(env_ptr->flags), &flag2);
+				sizeof(env_new.flags), &flag2);
 		}
 		if (flag1 != ACTIVE_FLAG) {
 			flag1 = ACTIVE_FLAG;
 			spi_flash_write(env_flash,
 				env_offset + offsetof(env_t, flags),
-				sizeof(env_ptr->flags), &flag1);
+				sizeof(env_new.flags), &flag1);
 		}
 	} else if (current_env == 2) {
 		if (flag1 != OBSOLETE_FLAG) {
 			flag1 = OBSOLETE_FLAG;
 			spi_flash_write(env_flash,
 				env_new_offset + offsetof(env_t, flags),
-				sizeof(env_ptr->flags), &flag1);
+				sizeof(env_new.flags), &flag1);
 		}
 		if (flag2 != ACTIVE_FLAG) {
 			flag2 = ACTIVE_FLAG;
 			spi_flash_write(env_flash,
 				env_offset + offsetof(env_t, flags),
-				sizeof(env_ptr->flags), &flag2);
+				sizeof(env_new.flags), &flag2);
 		}
 	}
 	if (gd->env_valid == 2) {
@@ -278,15 +300,9 @@ void env_relocate_spec(void)
 err_read:
 	spi_flash_free(env_flash);
 	env_flash = NULL;
-err_probe:
-err_crc:
-	puts("*** Warning - bad CRC, using default environment\n\n");
 out:
-	if (tmp_env1)
-		free(tmp_env1);
-	if (tmp_env2)
-		free(tmp_env2);
-	set_default_env();
+	free(tmp_env1);
+	free(tmp_env2);
 }
 #else
 int saveenv(void)
@@ -348,32 +364,30 @@ int saveenv(void)
 
 void env_relocate_spec(void)
 {
+	char buf[CONFIG_ENV_SIZE];
 	int ret;
 
 	env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
 			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
-	if (!env_flash)
-		goto err_probe;
-
-	ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, env_ptr);
-	if (ret)
-		goto err_read;
-
-	if (crc32(0, env_ptr->data, ENV_SIZE) != env_ptr->crc)
-		goto err_crc;
+	if (!env_flash) {
+		set_default_env("!spi_flash_probe() failed");
+		return;
+	}
 
-	gd->env_valid = 1;
+	ret = spi_flash_read(env_flash,
+		CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, buf);
+	if (ret) {
+		set_default_env("!spi_flash_read() failed");
+		goto out;
+	}
 
-	return;
+	ret = env_import(buf, 1);
 
-err_read:
+	if (ret)
+		gd->env_valid = 1;
+out:
 	spi_flash_free(env_flash);
 	env_flash = NULL;
-err_probe:
-err_crc:
-	puts("*** Warning - bad CRC, using default environment\n\n");
-
-	set_default_env();
 }
 #endif