Merge git://www.denx.de/git/u-boot-marvell

8 files changed, 558 insertions, 5 deletions

diff --git a/board/CZ.NIC/turris_omnia/Makefile b/board/CZ.NIC/turris_omnia/Makefile
new file mode 100644
index 0000000000..f2ae50654f
--- /dev/null
+++ b/board/CZ.NIC/turris_omnia/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= turris_omnia.o
diff --git a/board/CZ.NIC/turris_omnia/kwbimage.cfg b/board/CZ.NIC/turris_omnia/kwbimage.cfg
new file mode 100644
index 0000000000..cc05792556
--- /dev/null
+++ b/board/CZ.NIC/turris_omnia/kwbimage.cfg
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2014 Stefan Roese <sr@denx.de>
+#
+
+# Armada XP uses version 1 image format
+VERSION		1
+
+# Boot Media configurations
+BOOT_FROM	spi
+
+# Binary Header (bin_hdr) with DDR3 training code
+BINARY spl/u-boot-spl.bin 0000005b 00000068
diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
new file mode 100644
index 0000000000..86926f8050
--- /dev/null
+++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
@@ -0,0 +1,530 @@
+/*
+ * Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
+ * Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
+ *
+ * Derived from the code for
+ *   Marvell/db-88f6820-gp by Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <dm/uclass.h>
+#include <fdt_support.h>
+#include <time.h>
+
+#ifdef CONFIG_ATSHA204A
+# include <atsha204a-i2c.h>
+#endif
+
+#ifdef CONFIG_WDT_ORION
+# include <wdt.h>
+#endif
+
+#include "../drivers/ddr/marvell/a38x/ddr3_a38x_topology.h"
+#include <../serdes/a38x/high_speed_env_spec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define OMNIA_I2C_EEPROM_DM_NAME	"i2c@0"
+#define OMNIA_I2C_EEPROM		0x54
+#define OMNIA_I2C_EEPROM_CONFIG_ADDR	0x0
+#define OMNIA_I2C_EEPROM_ADDRLEN	2
+#define OMNIA_I2C_EEPROM_MAGIC		0x0341a034
+
+#define OMNIA_I2C_MCU_DM_NAME		"i2c@0"
+#define OMNIA_I2C_MCU_ADDR_STATUS	0x1
+#define OMNIA_I2C_MCU_SATA		0x20
+#define OMNIA_I2C_MCU_CARDDET		0x10
+#define OMNIA_I2C_MCU			0x2a
+#define OMNIA_I2C_MCU_WDT_ADDR		0x0b
+
+#define OMNIA_ATSHA204_OTP_VERSION	0
+#define OMNIA_ATSHA204_OTP_SERIAL	1
+#define OMNIA_ATSHA204_OTP_MAC0		3
+#define OMNIA_ATSHA204_OTP_MAC1		4
+
+#define MVTWSI_ARMADA_DEBUG_REG		0x8c
+
+/*
+ * Those values and defines are taken from the Marvell U-Boot version
+ * "u-boot-2013.01-2014_T3.0"
+ */
+#define OMNIA_GPP_OUT_ENA_LOW					\
+	(~(BIT(1)  | BIT(4)  | BIT(6)  | BIT(7)  | BIT(8)  | BIT(9)  |	\
+	   BIT(10) | BIT(11) | BIT(19) | BIT(22) | BIT(23) | BIT(25) |	\
+	   BIT(26) | BIT(27) | BIT(29) | BIT(30) | BIT(31)))
+#define OMNIA_GPP_OUT_ENA_MID					\
+	(~(BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(15) |	\
+	   BIT(16) | BIT(17) | BIT(18)))
+
+#define OMNIA_GPP_OUT_VAL_LOW	0x0
+#define OMNIA_GPP_OUT_VAL_MID	0x0
+#define OMNIA_GPP_POL_LOW	0x0
+#define OMNIA_GPP_POL_MID	0x0
+
+static struct serdes_map board_serdes_map_pex[] = {
+	{PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+	{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+	{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+	{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
+};
+
+static struct serdes_map board_serdes_map_sata[] = {
+	{SATA0, SERDES_SPEED_6_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+	{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+	{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
+};
+
+static bool omnia_detect_sata(void)
+{
+	struct udevice *bus, *dev;
+	int ret;
+	u16 mode;
+
+	puts("SERDES0 card detect: ");
+
+	if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_MCU_DM_NAME, &bus)) {
+		puts("Cannot find MCU bus!\n");
+		return false;
+	}
+
+	ret = i2c_get_chip(bus, OMNIA_I2C_MCU, 1, &dev);
+	if (ret) {
+		puts("Cannot get MCU chip!\n");
+		return false;
+	}
+
+	ret = dm_i2c_read(dev, OMNIA_I2C_MCU_ADDR_STATUS, (uchar *) &mode, 2);
+	if (ret) {
+		puts("I2C read failed! Default PEX\n");
+		return false;
+	}
+
+	if (!(mode & OMNIA_I2C_MCU_CARDDET)) {
+		puts("NONE\n");
+		return false;
+	}
+
+	if (mode & OMNIA_I2C_MCU_SATA) {
+		puts("SATA\n");
+		return true;
+	} else {
+		puts("PEX\n");
+		return false;
+	}
+}
+
+int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
+{
+	if (omnia_detect_sata()) {
+		*serdes_map_array = board_serdes_map_sata;
+		*count = ARRAY_SIZE(board_serdes_map_sata);
+	} else {
+		*serdes_map_array = board_serdes_map_pex;
+		*count = ARRAY_SIZE(board_serdes_map_pex);
+	}
+
+	return 0;
+}
+
+struct omnia_eeprom {
+	u32 magic;
+	u32 ramsize;
+	char region[4];
+	u32 crc;
+};
+
+static bool omnia_read_eeprom(struct omnia_eeprom *oep)
+{
+	struct udevice *bus, *dev;
+	int ret, crc, retry = 3;
+
+	if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_EEPROM_DM_NAME, &bus)) {
+		puts("Cannot find EEPROM bus\n");
+		return false;
+	}
+
+	ret = i2c_get_chip(bus, OMNIA_I2C_EEPROM, OMNIA_I2C_EEPROM_ADDRLEN, &dev);
+	if (ret) {
+		puts("Cannot get EEPROM chip\n");
+		return false;
+	}
+
+	for (; retry > 0; --retry) {
+		ret = dm_i2c_read(dev, OMNIA_I2C_EEPROM_CONFIG_ADDR, (uchar *) oep, sizeof(struct omnia_eeprom));
+		if (ret)
+			continue;
+
+		if (oep->magic != OMNIA_I2C_EEPROM_MAGIC) {
+			puts("I2C EEPROM missing magic number!\n");
+			continue;
+		}
+
+		crc = crc32(0, (unsigned char *) oep,
+			    sizeof(struct omnia_eeprom) - 4);
+		if (crc == oep->crc) {
+			break;
+		} else {
+			printf("CRC of EEPROM memory config failed! "
+			       "calc=0x%04x saved=0x%04x\n", crc, oep->crc);
+		}
+	}
+
+	if (!retry) {
+		puts("I2C EEPROM read failed!\n");
+		return false;
+	}
+
+	return true;
+}
+
+/*
+ * Define the DDR layout / topology here in the board file. This will
+ * be used by the DDR3 init code in the SPL U-Boot version to configure
+ * the DDR3 controller.
+ */
+static struct hws_topology_map board_topology_map_1g = {
+	0x1, /* active interfaces */
+	/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
+	{ { { {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0} },
+	    SPEED_BIN_DDR_1600K,	/* speed_bin */
+	    BUS_WIDTH_16,		/* memory_width */
+	    MEM_4G,			/* mem_size */
+	    DDR_FREQ_800,		/* frequency */
+	    0, 0,			/* cas_l cas_wl */
+	    HWS_TEMP_NORMAL,		/* temperature */
+	    HWS_TIM_2T} },		/* timing (force 2t) */
+	5,				/* Num Of Bus Per Interface*/
+	BUS_MASK_32BIT			/* Busses mask */
+};
+
+static struct hws_topology_map board_topology_map_2g = {
+	0x1, /* active interfaces */
+	/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
+	{ { { {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0} },
+	    SPEED_BIN_DDR_1600K,	/* speed_bin */
+	    BUS_WIDTH_16,		/* memory_width */
+	    MEM_8G,			/* mem_size */
+	    DDR_FREQ_800,		/* frequency */
+	    0, 0,			/* cas_l cas_wl */
+	    HWS_TEMP_NORMAL,		/* temperature */
+	    HWS_TIM_2T} },		/* timing (force 2t) */
+	5,				/* Num Of Bus Per Interface*/
+	BUS_MASK_32BIT			/* Busses mask */
+};
+
+struct hws_topology_map *ddr3_get_topology_map(void)
+{
+	static int mem = 0;
+	struct omnia_eeprom oep;
+
+	/* Get the board config from EEPROM */
+	if (mem == 0) {
+		if(!omnia_read_eeprom(&oep))
+			goto out;
+
+		printf("Memory config in EEPROM: 0x%02x\n", oep.ramsize);
+
+		if (oep.ramsize == 0x2)
+			mem = 2;
+		else
+			mem = 1;
+	}
+
+out:
+	/* Hardcoded fallback */
+	if (mem == 0) {
+		puts("WARNING: Memory config from EEPROM read failed.\n");
+		puts("Falling back to default 1GiB map.\n");
+		mem = 1;
+	}
+
+	/* Return the board topology as defined in the board code */
+	if (mem == 1)
+		return &board_topology_map_1g;
+	if (mem == 2)
+		return &board_topology_map_2g;
+
+	return &board_topology_map_1g;
+}
+
+#ifndef CONFIG_SPL_BUILD
+static int set_regdomain(void)
+{
+	struct omnia_eeprom oep;
+	char rd[3] = {' ', ' ', 0};
+
+	if (omnia_read_eeprom(&oep))
+		memcpy(rd, &oep.region, 2);
+	else
+		puts("EEPROM regdomain read failed.\n");
+
+	printf("Regdomain set to %s\n", rd);
+	return setenv("regdomain", rd);
+}
+#endif
+
+int board_early_init_f(void)
+{
+	u32 i2c_debug_reg;
+
+	/* Configure MPP */
+	writel(0x11111111, MVEBU_MPP_BASE + 0x00);
+	writel(0x11111111, MVEBU_MPP_BASE + 0x04);
+	writel(0x11244011, MVEBU_MPP_BASE + 0x08);
+	writel(0x22222111, MVEBU_MPP_BASE + 0x0c);
+	writel(0x22200002, MVEBU_MPP_BASE + 0x10);
+	writel(0x30042022, MVEBU_MPP_BASE + 0x14);
+	writel(0x55550555, MVEBU_MPP_BASE + 0x18);
+	writel(0x00005550, MVEBU_MPP_BASE + 0x1c);
+
+	/* Set GPP Out value */
+	writel(OMNIA_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
+	writel(OMNIA_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
+
+	/* Set GPP Polarity */
+	writel(OMNIA_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
+	writel(OMNIA_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
+
+	/* Set GPP Out Enable */
+	writel(OMNIA_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
+	writel(OMNIA_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
+
+	/* Disable I2C debug mode blocking 0x64 I2C address */
+	i2c_debug_reg = readl(MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);
+	i2c_debug_reg &= ~(1<<18);
+	writel(i2c_debug_reg, MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);
+
+	return 0;
+}
+
+#ifndef CONFIG_SPL_BUILD
+static bool disable_mcu_watchdog(void)
+{
+	struct udevice *bus, *dev;
+	int ret, retry = 3;
+	uchar buf[1] = {0x0};
+
+	if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_MCU_DM_NAME, &bus)) {
+		puts("Cannot find MCU bus! Can not disable MCU WDT.\n");
+		return false;
+	}
+
+	ret = i2c_get_chip(bus, OMNIA_I2C_MCU, 1, &dev);
+	if (ret) {
+		puts("Cannot get MCU chip! Can not disable MCU WDT.\n");
+		return false;
+	}
+
+	for (; retry > 0; --retry)
+		if (!dm_i2c_write(dev, OMNIA_I2C_MCU_WDT_ADDR, (uchar *) buf, 1))
+			break;
+
+	if (retry <= 0) {
+		puts("I2C MCU watchdog failed to disable!\n");
+		return false;
+	}
+
+	return true;
+}
+#endif
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
+static struct udevice *watchdog_dev = NULL;
+#endif
+
+int board_init(void)
+{
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+#ifndef CONFIG_SPL_BUILD
+# ifdef CONFIG_WDT_ORION
+	if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
+		puts("Cannot find Armada 385 watchdog!\n");
+	} else {
+		puts("Enabling Armada 385 watchdog.\n");
+		wdt_start(watchdog_dev, (u32) 25000000 * 120, 0);
+	}
+# endif
+
+	if (disable_mcu_watchdog())
+		puts("Disabled MCU startup watchdog.\n");
+
+	set_regdomain();
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_WATCHDOG
+/* Called by macro WATCHDOG_RESET */
+void watchdog_reset(void)
+{
+# if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
+	static ulong next_reset = 0;
+	ulong now;
+
+	if (!watchdog_dev)
+		return;
+
+	now = timer_get_us();
+
+	/* Do not reset the watchdog too often */
+	if (now > next_reset) {
+		wdt_reset(watchdog_dev);
+		next_reset = now + 1000;
+	}
+# endif
+}
+#endif
+
+int board_late_init(void)
+{
+#ifndef CONFIG_SPL_BUILD
+	set_regdomain();
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_ATSHA204A
+static struct udevice *get_atsha204a_dev(void)
+{
+	static struct udevice *dev = NULL;
+
+	if (dev != NULL)
+		return dev;
+
+	if (uclass_get_device_by_name(UCLASS_MISC, "atsha204a@64", &dev)) {
+		puts("Cannot find ATSHA204A on I2C bus!\n");
+		dev = NULL;
+	}
+
+	return dev;
+}
+#endif
+
+int checkboard(void)
+{
+	u32 version_num, serial_num;
+	int err = 1;
+
+#ifdef CONFIG_ATSHA204A
+	struct udevice *dev = get_atsha204a_dev();
+
+	if (dev) {
+		err = atsha204a_wakeup(dev);
+		if (err)
+			goto out;
+
+		err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
+				     OMNIA_ATSHA204_OTP_VERSION,
+				     (u8 *) &version_num);
+		if (err)
+			goto out;
+
+		err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
+				     OMNIA_ATSHA204_OTP_SERIAL,
+				     (u8 *) &serial_num);
+		if (err)
+			goto out;
+
+		atsha204a_sleep(dev);
+	}
+
+out:
+#endif
+
+	if (err)
+		printf("Board: Turris Omnia (ver N/A). SN: N/A\n");
+	else
+		printf("Board: Turris Omnia SNL %08X%08X\n",
+		       be32_to_cpu(version_num), be32_to_cpu(serial_num));
+
+	return 0;
+}
+
+static void increment_mac(u8 *mac)
+{
+	int i;
+
+	for (i = 5; i >= 3; i--) {
+		mac[i] += 1;
+		if (mac[i])
+			break;
+	}
+}
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_ATSHA204A
+	int err;
+	struct udevice *dev = get_atsha204a_dev();
+	u8 mac0[4], mac1[4], mac[6];
+
+	if (!dev)
+		goto out;
+
+	err = atsha204a_wakeup(dev);
+	if (err)
+		goto out;
+
+	err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
+			     OMNIA_ATSHA204_OTP_MAC0, mac0);
+	if (err)
+		goto out;
+
+	err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
+			     OMNIA_ATSHA204_OTP_MAC1, mac1);
+	if (err)
+		goto out;
+
+	atsha204a_sleep(dev);
+
+	mac[0] = mac0[1];
+	mac[1] = mac0[2];
+	mac[2] = mac0[3];
+	mac[3] = mac1[1];
+	mac[4] = mac1[2];
+	mac[5] = mac1[3];
+
+	if (is_valid_ethaddr(mac))
+		eth_setenv_enetaddr("ethaddr", mac);
+
+	increment_mac(mac);
+
+	if (is_valid_ethaddr(mac))
+		eth_setenv_enetaddr("eth1addr", mac);
+
+	increment_mac(mac);
+
+	if (is_valid_ethaddr(mac))
+		eth_setenv_enetaddr("eth2addr", mac);
+
+out:
+#endif
+
+	return 0;
+}
+
diff --git a/board/Marvell/db-88f6820-amc/db-88f6820-amc.c b/board/Marvell/db-88f6820-amc/db-88f6820-amc.c
index cade99c8d7..40fa599865 100644
--- a/board/Marvell/db-88f6820-amc/db-88f6820-amc.c
+++ b/board/Marvell/db-88f6820-amc/db-88f6820-amc.c
@@ -69,7 +69,8 @@ static struct hws_topology_map board_topology_map = {
 	    MEM_4G,			/* mem_size */
 	    DDR_FREQ_800,		/* frequency */
 	    0, 0,			/* cas_l cas_wl */
-	    HWS_TEMP_LOW} },		/* temperature */
+	    HWS_TEMP_LOW,		/* temperature */
+	    HWS_TIM_DEFAULT} },		/* timing */
 	5,				/* Num Of Bus Per Interface*/
 	BUS_MASK_32BIT			/* Busses mask */
 };
diff --git a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
index e700781103..a1974cb4bd 100644
--- a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
+++ b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
@@ -90,7 +90,8 @@ static struct hws_topology_map board_topology_map = {
 	    MEM_4G,			/* mem_size */
 	    DDR_FREQ_800,		/* frequency */
 	    0, 0,			/* cas_l cas_wl */
-	    HWS_TEMP_LOW} },		/* temperature */
+	    HWS_TEMP_LOW,		/* temperature */
+	    HWS_TIM_DEFAULT} },		/* timing */
 	5,				/* Num Of Bus Per Interface*/
 	BUS_MASK_32BIT			/* Busses mask */
 };
diff --git a/board/gdsys/a38x/controlcenterdc.c b/board/gdsys/a38x/controlcenterdc.c
index f0efb53447..32168d3576 100644
--- a/board/gdsys/a38x/controlcenterdc.c
+++ b/board/gdsys/a38x/controlcenterdc.c
@@ -53,7 +53,8 @@ static struct hws_topology_map ddr_topology_map = {
 	    MEM_4G,			/* mem_size */
 	    DDR_FREQ_533,		/* frequency */
 	    0, 0,			/* cas_l cas_wl */
-	    HWS_TEMP_LOW} },		/* temperature */
+	    HWS_TEMP_LOW,		/* temperature */
+	    HWS_TIM_DEFAULT} },		/* timing */
 	5,				/* Num Of Bus Per Interface*/
 	BUS_MASK_32BIT			/* Busses mask */
 };
diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c
index 3a8257cac3..8906636f76 100644
--- a/board/solidrun/clearfog/clearfog.c
+++ b/board/solidrun/clearfog/clearfog.c
@@ -83,7 +83,8 @@ static struct hws_topology_map board_topology_map = {
 	    MEM_4G,			/* mem_size */
 	    DDR_FREQ_800,		/* frequency */
 	    0, 0,			/* cas_l cas_wl */
-	    HWS_TEMP_LOW} },		/* temperature */
+	    HWS_TEMP_LOW,		/* temperature */
+	    HWS_TIM_DEFAULT} },		/* timing */
 	5,				/* Num Of Bus Per Interface*/
 	BUS_MASK_32BIT			/* Busses mask */
 };
diff --git a/board/solidrun/clearfog/kwbimage.cfg b/board/solidrun/clearfog/kwbimage.cfg
index c650c2c65e..f41d25a8a1 100644
--- a/board/solidrun/clearfog/kwbimage.cfg
+++ b/board/solidrun/clearfog/kwbimage.cfg
@@ -2,7 +2,7 @@
 # Copyright (C) 2015 Stefan Roese <sr@denx.de>
 #
 
-# Armada XP uses version 1 image format
+# Armada 38x use version 1 image format
 VERSION		1
 
 # Boot Media configurations