diff options
| author | Peter Robinson <pbrobinson@gmail.com> | 2021-04-02 17:52:50 +0100 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2021-04-08 20:29:54 +0200 |
| commit | 2d0401b1182e70234a184d73da57f5745f1c0598 (patch) | |
| tree | 8b23a973a9ce38c800d59e3e3df2bed3fc2c4daf /board | |
| parent | 41a6890d3dc2d8279e04893e696f006e4d3625ce (diff) | |
| download | u-boot-2d0401b1182e70234a184d73da57f5745f1c0598.tar.gz u-boot-2d0401b1182e70234a184d73da57f5745f1c0598.tar.bz2 u-boot-2d0401b1182e70234a184d73da57f5745f1c0598.zip | |
ARM: imx: udoo: Convert block devices to DM
Enable DM block, DM MMC and DM SATA support on iMX6 Udoo
convert board code to match the DM support.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board')
| -rw-r--r-- | board/udoo/udoo.c | 30 |
1 files changed, 0 insertions, 30 deletions
diff --git a/board/udoo/udoo.c b/board/udoo/udoo.c index d83f23dd35..c1acc25a9d 100644 --- a/board/udoo/udoo.c +++ b/board/udoo/udoo.c @@ -19,8 +19,6 @@ #include <asm/gpio.h> #include <asm/mach-imx/iomux-v3.h> #include <asm/mach-imx/sata.h> -#include <mmc.h> -#include <fsl_esdhc_imx.h> #include <asm/arch/crm_regs.h> #include <asm/io.h> #include <asm/arch/sys_proto.h> @@ -56,15 +54,6 @@ static iomux_v3_cfg_t const uart2_pads[] = { IOMUX_PADS(PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), }; -static iomux_v3_cfg_t const usdhc3_pads[] = { - IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), -}; - static iomux_v3_cfg_t const wdog_pads[] = { IOMUX_PADS(PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL)), IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19), @@ -176,13 +165,6 @@ static void setup_iomux_wdog(void) gpio_direction_input(WDT_TRG); } -static struct fsl_esdhc_cfg usdhc_cfg = { USDHC3_BASE_ADDR }; - -int board_mmc_getcd(struct mmc *mmc) -{ - return 1; /* Always present */ -} - int board_eth_init(struct bd_info *bis) { uint32_t base = IMX_FEC_BASE; @@ -217,15 +199,6 @@ free_bus: return ret; } -int board_mmc_init(struct bd_info *bis) -{ - SETUP_IOMUX_PADS(usdhc3_pads); - usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg.max_bus_width = 4; - - return fsl_esdhc_initialize(bis, &usdhc_cfg); -} - int board_early_init_f(void) { setup_iomux_wdog(); @@ -248,9 +221,6 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; -#ifdef CONFIG_SATA - setup_sata(); -#endif return 0; } |