Merge with git://www.denx.de/git/u-boot.git

4 files changed, 22 insertions, 23 deletions

diff --git a/board/trab/Makefile b/board/trab/Makefile
index 868ca4281f..fbe1c3640f 100644
--- a/board/trab/Makefile
+++ b/board/trab/Makefile
@@ -50,7 +50,6 @@ $(LIB):	$(obj).depend $(OBJS) $(SOBJS)
 $(obj)trab_fkt.srec:	$(OBJS_FKT) $(LIB)
 	$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e trab_fkt $^ $(LIB) \
 		-L$(obj)../../examples -lstubs \
-		-L$(obj)../../lib_generic -lgeneric \
 		-L$(gcclibdir) -lgcc
 	$(OBJCOPY) -O srec $(<:.o=) $@
 
diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c
index 6f903d2b03..92120b0d01 100644
--- a/board/trab/auto_update.c
+++ b/board/trab/auto_update.c
@@ -46,8 +46,8 @@
 #error "must define CFG_HUSH_PARSER"
 #endif
 
-#if !(CONFIG_COMMANDS & CFG_CMD_FAT)
-#error "must define CFG_CMD_FAT"
+#if !defined(CONFIG_CMD_FAT)
+#error "must define CONFIG_CMD_FAT"
 #endif
 
 /*
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index b82c8edef7..daa6aeefc7 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -32,7 +32,7 @@
  * TRAB board specific commands. Especially commands for burn-in and function
  * test.
  */
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if defined(CONFIG_CMD_BSP)
 
 /* limits for valid range of VCC5V in mV  */
 #define VCC5V_MIN       4500
@@ -846,7 +846,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int contact_temp;
 	int delay = 0;
-#if (CONFIG_COMMANDS & CFG_CMD_DATE)
+#if defined(CONFIG_CMD_DATE)
 	struct rtc_time tm;
 #endif
 
@@ -862,7 +862,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	spi_init ();
 	while (1) {
 
-#if (CONFIG_COMMANDS & CFG_CMD_DATE)
+#if defined(CONFIG_CMD_DATE)
 		rtc_get (&tm);
 		printf ("%4d-%02d-%02d %2d:%02d:%02d - ",
 			tm.tm_year, tm.tm_mon, tm.tm_mday,
@@ -893,4 +893,4 @@ U_BOOT_CMD(
 	"      For each measurment a timestamp is printeted\n"
 );
 
-#endif	/* CFG_CMD_BSP */
+#endif
diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c
index 71be6e03e5..7273ef97b6 100644
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@@ -148,14 +148,14 @@ static int rs485_receive_chars (char *data, int timeout);
 static unsigned short updcrc(unsigned short icrc, unsigned char *icp,
 			     unsigned int icnt);
 
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 static int trab_eeprom_read (char **argv);
 static int trab_eeprom_write (char **argv);
 int i2c_write_multiple (uchar chip, uint addr, int alen, uchar *buffer,
 			int len);
 int i2c_read_multiple ( uchar chip, uint addr, int alen, uchar *buffer,
 			int len);
-#endif /* CFG_CMD_I2C */
+#endif
 
 /*
  * TRAB board specific commands. Especially commands for burn-in and function
@@ -959,7 +959,7 @@ static int touch_check_pressed (void)
 
 static int touch_write_clibration_values (int calib_point, int x, int y)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 	int x_verify = 0;
 	int y_verify = 0;
 
@@ -1019,10 +1019,10 @@ static int touch_write_clibration_values (int calib_point, int x, int y)
 	}
 	return 1;
 #else
-	printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+	printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
 		"to EEPROM\n");
 	return (1);
-#endif /* CFG_CMD_I2C */
+#endif
 }
 
 
@@ -1105,7 +1105,7 @@ static int rs485_receive_chars (char *data, int timeout)
 
 int do_serial_number (char **argv)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 	unsigned int serial_number;
 
 	if (strcmp (argv[2], "read") == 0) {
@@ -1130,16 +1130,16 @@ int do_serial_number (char **argv)
 	printf ("%s: unknown command %s\n", __FUNCTION__, argv[2]);
 	return (1);             /* unknown command, return error */
 #else
-	printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+	printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
 		"to EEPROM\n");
 	return (1);
-#endif /* CFG_CMD_I2C */
+#endif
 }
 
 
 int do_crc16 (void)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 	int crc;
 	unsigned char buf[EEPROM_MAX_CRC_BUF];
 
@@ -1160,10 +1160,10 @@ int do_crc16 (void)
 	}
 	return (0);
 #else
-	printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+	printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
 		"to EEPROM\n");
 	return (1);
-#endif /* CFG_CMD_I2C */
+#endif
 }
 
 
@@ -1260,7 +1260,7 @@ int do_gain (char **argv)
 
 int do_eeprom (char **argv)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 	if (strcmp (argv[2], "read") == 0) {
 		return (trab_eeprom_read (argv));
 	}
@@ -1272,13 +1272,13 @@ int do_eeprom (char **argv)
 	printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]);
 	return (1);
 #else
-	printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+	printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
 		"to EEPROM\n");
 	return (1);
-#endif /* CFG_CMD_I2C */
+#endif
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 static int trab_eeprom_read (char **argv)
 {
 	int i;
@@ -1408,4 +1408,4 @@ int i2c_read_multiple ( uchar chip, uint addr, int alen,
 	}
 	return (0);
 }
-#endif /* CFG_CMD_I2C */
+#endif