Add support for Siemens SX1 mobile phone;

add support for USB-based console
(enable with "setenv stdout usbtty; setenv stdin usbtty")

6 files changed, 1089 insertions, 0 deletions

diff --git a/board/sx1/Makefile b/board/sx1/Makefile
new file mode 100644
index 0000000000..808c76afe5
--- /dev/null
+++ b/board/sx1/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= sx1.o flash.o
+SOBJS	:= platform.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/sx1/config.mk b/board/sx1/config.mk
new file mode 100644
index 0000000000..4902e82332
--- /dev/null
+++ b/board/sx1/config.mk
@@ -0,0 +1,19 @@
+#
+# (C) Copyright 2004
+# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+#
+# SX1 board with OMAP1510 (ARM925T) cpu
+# see http://www.ti.com/ for more information on Texas Insturments
+#
+# SX1 has 1 bank of 256 MB SDRAM
+# Physical Address:
+# 1000'0000 to 2000'0000
+#
+#
+# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000  (mem base + reserved)
+#
+# we load ourself to 1108'0000
+#
+#
+
+TEXT_BASE = 0x11080000
diff --git a/board/sx1/flash.c b/board/sx1/flash.c
new file mode 100644
index 0000000000..a4bed61474
--- /dev/null
+++ b/board/sx1/flash.c
@@ -0,0 +1,436 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+
+#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips	   */
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH	ushort
+#define FLASH_PORT_WIDTHV	vu_short
+#define SWAP(x)			__swab16(x)
+#else
+#define FLASH_PORT_WIDTH	ulong
+#define FLASH_PORT_WIDTHV	vu_long
+#define SWAP(x)			__swab32(x)
+#endif
+
+#define FPW	FLASH_PORT_WIDTH
+#define FPWV	FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+void inline spin_wheel (void);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	int i;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		switch (i) {
+		case 0:
+			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+			break;
+		case 1:
+			flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
+			break;
+		default:
+			panic ("configured too many flash banks!\n");
+			break;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors
+	 */
+	flash_protect ( FLAG_PROTECT_SET,
+			CFG_FLASH_BASE,
+			CFG_FLASH_BASE + monitor_flash_len - 1,
+			&flash_info[0]);
+
+	flash_protect ( FLAG_PROTECT_SET,
+			CFG_ENV_ADDR,
+			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			&flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+		for (i = 0; i < info->sector_count; i++) {
+			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+			info->protect[i] = 0;
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:
+		printf ("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F128J3A:
+		printf ("28F128J3A\n");
+		break;
+	case FLASH_28F640J3A:
+		printf ("28F640J3A\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "	   ");
+	}
+	printf ("\n");
+	return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
+{
+	volatile FPW value;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr[0x5555] = (FPW) 0x00AA00AA;
+	addr[0x2AAA] = (FPW) 0x00550055;
+	addr[0x5555] = (FPW) 0x00900090;
+
+	mb ();
+	value = addr[0];
+
+	switch (value) {
+	case (FPW) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+		return (0);			/* no or unknown flash	*/
+	}
+
+	mb ();
+	value = addr[1];			/* device ID	    */
+	switch (value) {
+	case (FPW) INTEL_ID_28F128J3A:
+		info->flash_id += FLASH_28F128J3A;
+		info->sector_count = 128;
+		info->size = 0x01000000;
+		break;				/* => 16 MB	*/
+	case (FPW) INTEL_ID_28F640J3A:
+		info->flash_id += FLASH_28F640J3A;
+		info->sector_count = 64;
+		info->size = 0x00800000;
+		break;				/* => 8 MB     */
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		break;
+	}
+
+	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+		printf ("** ERROR: sector count %d > max (%d) **\n",
+			info->sector_count, CFG_MAX_FLASH_SECT);
+		info->sector_count = CFG_MAX_FLASH_SECT;
+	}
+
+	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong type, start, last;
+	int rcode = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	type = (info->flash_id & FLASH_VENDMASK);
+	if ((type != FLASH_MAN_INTEL)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	/*start = get_timer (0); */
+	last = start;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) { /* not protected */
+			FPWV *addr = (FPWV *) (info->start[sect]);
+			FPW status;
+
+			printf ("Erasing sector %2d ... ", sect);
+
+			/* arm simple, non interrupt dependent timer */
+			reset_timer_masked ();
+
+			*addr = (FPW) 0x00500050;	/* clear status register */
+			*addr = (FPW) 0x00200020;	/* erase setup */
+			*addr = (FPW) 0x00D000D0;	/* erase confirm */
+
+			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
+					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
+					rcode = 1;
+					break;
+				}
+			}
+
+			*addr = (FPW) 0x00500050;	/* clear status register cmd.	*/
+			*addr = (FPW) 0x00FF00FF;	/* resest to read mode		*/
+
+			printf (" done\n");
+		}
+	}
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	FPW data;
+	int count, i, l, rc, port_width;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return 4;
+	}
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+	wp = (addr & ~1);
+	port_width = 2;
+#else
+	wp = (addr & ~3);
+	port_width = 4;
+#endif
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < port_width && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < port_width; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	count = 0;
+	while (cnt >= port_width) {
+		data = 0;
+		for (i = 0; i < port_width; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+		cnt -= port_width;
+		if (count++ > 0x800) {
+			spin_wheel ();
+			count = 0;
+		}
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < port_width; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t * info, ulong dest, FPW data)
+{
+	FPWV *addr = (FPWV *) dest;
+	ulong status;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	*addr = (FPW) 0x00400040;	/* write setup */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	/* wait while polling the status register */
+	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+			return (1);
+		}
+	}
+
+	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+
+	return (0);
+}
+
+void inline spin_wheel (void)
+{
+	static int p = 0;
+	static char w[] = "\\/-";
+
+	printf ("\010%c", w[p]);
+	(++p == 3) ? (p = 0) : 0;
+}
diff --git a/board/sx1/platform.S b/board/sx1/platform.S
new file mode 100644
index 0000000000..304812805a
--- /dev/null
+++ b/board/sx1/platform.S
@@ -0,0 +1,406 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ *
+ * -- Some bits of code used from rrload's head_OMAP1510.s --
+ * Copyright (C) 2002 RidgeRun, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+#if defined(CONFIG_OMAP1510)
+#include <./configs/omap1510.h>
+#endif
+
+#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK))
+
+
+_TEXT_BASE:
+	.word	TEXT_BASE	 /* sdram load addr from config.mk */
+
+.globl platformsetup
+platformsetup:
+
+	/*
+	 * Configure 1510 pins functions to match our board.
+	 */
+	ldr	r0, REG_PULL_DWN_CTRL_0
+	ldr	r1, VAL_PULL_DWN_CTRL_0
+	str	r1, [r0]
+	ldr	r0, REG_PULL_DWN_CTRL_1
+	ldr	r1, VAL_PULL_DWN_CTRL_1
+	str	r1, [r0]
+	ldr	r0, REG_PULL_DWN_CTRL_2
+	ldr	r1, VAL_PULL_DWN_CTRL_2
+	str	r1, [r0]
+	ldr	r0, REG_PULL_DWN_CTRL_3
+	ldr	r1, VAL_PULL_DWN_CTRL_3
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_4
+	ldr	r1, VAL_FUNC_MUX_CTRL_4
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_5
+	ldr	r1, VAL_FUNC_MUX_CTRL_5
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_6
+	ldr	r1, VAL_FUNC_MUX_CTRL_6
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_7
+	ldr	r1, VAL_FUNC_MUX_CTRL_7
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_8
+	ldr	r1, VAL_FUNC_MUX_CTRL_8
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_9
+	ldr	r1, VAL_FUNC_MUX_CTRL_9
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_A
+	ldr	r1, VAL_FUNC_MUX_CTRL_A
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_B
+	ldr	r1, VAL_FUNC_MUX_CTRL_B
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_C
+	ldr	r1, VAL_FUNC_MUX_CTRL_C
+	str	r1, [r0]
+	ldr	r0, REG_FUNC_MUX_CTRL_D
+	ldr	r1, VAL_FUNC_MUX_CTRL_D
+	str	r1, [r0]
+	ldr	r0, REG_VOLTAGE_CTRL_0
+	ldr	r1, VAL_VOLTAGE_CTRL_0
+	str	r1, [r0]
+	ldr	r0, REG_TEST_DBG_CTRL_0
+	ldr	r1, VAL_TEST_DBG_CTRL_0
+	str	r1, [r0]
+	ldr	r0, REG_MOD_CONF_CTRL_0
+	ldr	r1, VAL_MOD_CONF_CTRL_0
+	str	r1, [r0]
+
+	/* Move to 1510 mode */
+	ldr	r0, REG_COMP_MODE_CTRL_0
+	ldr	r1, VAL_COMP_MODE_CTRL_0
+	str	r1, [r0]
+
+	/* Set up Traffic Ctlr*/
+	ldr r0, REG_TC_IMIF_PRIO
+	mov r1, #0x0
+	str r1, [r0]
+	ldr r0, REG_TC_EMIFS_PRIO
+	str r1, [r0]
+	ldr r0, REG_TC_EMIFF_PRIO
+	str r1, [r0]
+
+	ldr r0, REG_TC_EMIFS_CONFIG
+	ldr r1, [r0]
+	bic r1, r1, #0x08   /* clear the global power-down enable PDE bit */
+	bic r1, r1, #0x01   /* write protect flash by clearing the WP bit */
+	str r1, [r0]	    /* EMIFS GlB Configuration. (value 0x12 most likely) */
+
+	ldr r0, _GPIO_PIN_CONTROL_REG
+	ldrh r1,[r0]
+	orr r1, r1, #0x0001 /* M_PCM_SYNC */
+	orr r1, r1, #0x4000 /* IPC_ACTIVE */
+	orr r1, r1, #0x0002 /* A_IRDA_OFF */
+	orr r1, r1, #0x0800 /* A_SWITCH	  */
+	orr r1, r1, #0x8000 /* A_USB_ON	  */
+	strh r1,[r0]
+
+	ldr r0, _GPIO_DIR_CONTROL_REG
+	ldrh r1,[r0]
+	bic r1, r1, #0x0001 /* M_PCM_SYNC */
+	bic r1, r1, #0x4000 /* IPC_ACTIVE */
+	bic r1, r1, #0x0002 /* A_IRDA_OFF */
+	bic r1, r1, #0x0800 /* A_SWITCH	  */
+	bic r1, r1, #0x8000 /* A_USB_ON	  */
+	strh r1,[r0]
+
+	ldr r0, _GPIO_DATA_OUTPUT_REG
+	ldrh r1,[r0]
+	bic r1, r1, #0x0001 /* M_PCM_SYNC */
+	orr r1, r1, #0x4000 /* IPC_ACTIVE */
+	orr r1, r1, #0x0002 /* A_IRDA_OFF */
+	bic r1, r1, #0x0800 /* A_SWITCH	  */
+	bic r1, r1, #0x8000 /* A_USB_ON	  */
+	strh r1,[r0]
+
+	/* Setup some clock domains */
+	ldr r1, =OMAP1510_CLKS
+	ldr r0, REG_ARM_IDLECT2
+	strh r1, [r0]  /* CLKM, Clock domain control. */
+
+	mov r1, #0x01  /* PER_EN bit */
+	ldr r0, REG_ARM_RSTCT2
+	strh r1, [r0]  /* CLKM; Peripheral reset. */
+
+	/* Set CLKM to Sync-Scalable  */
+	/* I supposidly need to enable the dsp clock before switching */
+	mov r1, #0x1000
+	ldr r0, REG_ARM_SYSST
+	strh r1, [r0]
+	mov r0, #0x400
+1:
+	subs r0, r0, #0x1   /* wait for any bubbles to finish */
+	bne 1b
+
+	ldr r1, VAL_ARM_CKCTL  /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
+	ldr r0, REG_ARM_CKCTL
+	strh r1, [r0]
+
+	/* setup DPLL 1 */
+	ldr r1, VAL_DPLL1_CTL
+	ldr r0, REG_DPLL1_CTL
+	strh r1, [r0]
+	ands r1, r1, #0x10  /* Check if PLL is enabled. */
+	beq lock_end	    /* Do not look for lock if BYPASS selected */
+2:
+	ldrh r1, [r0]
+	ands r1, r1, #0x01  /* Check the LOCK bit. */
+	beq 2b		    /* ...loop until bit goes hi. */
+lock_end:
+
+	/* Set memory timings corresponding to the new clock speed */
+
+	/* Check execution location to determine current execution location
+	 * and branch to appropriate initialization code.
+	 */
+	mov r0, #0x10000000		    /* Load physical SDRAM base. */
+	mov r1, pc			    /* Get current execution location. */
+	cmp r1, r0			    /* Compare. */
+	bge skip_sdram			    /* Skip over EMIF-fast initialization if running from SDRAM. */
+
+	/*
+	 * Delay for SDRAM initialization.
+	 */
+	mov r3, #0x1800			       /* value should be checked */
+3:
+	subs r3, r3, #0x1		      /* Decrement count */
+	bne 3b
+
+	/*
+	 * Set SDRAM control values. Disable refresh before MRS command.
+	 */
+	ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG   /* get good value */
+	bic r3, r0, #0xC		    /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
+	orr r3, r3, #0x8000000		    /* (BIT27) Disable CLK when Power down or Self-Refresh */
+	orr r3, r3, #0x4000000		    /* BIT26 Power Down Enable */
+	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
+	str r3, [r2]			    /* Store the passed value with AR disabled. */
+
+	ldr r1, VAL_TC_EMIFF_MRS	    /* get MRS value */
+	ldr r2, REG_TC_EMIFF_MRS	    /* Point to MRS register. */
+	str r1, [r2]			    /* Store the passed value.*/
+
+	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
+	str r0, [r2]			    /* Store the passed value. */
+
+	/*
+	 * Delay for SDRAM initialization.
+	 */
+	mov r3, #0x1800
+4:
+	subs r3, r3, #1			    /* Decrement count. */
+	bne 4b
+
+skip_sdram:
+
+	/* slow interface */
+	ldr r1, VAL_TC_EMIFS_CS0_CONFIG
+	ldr r0, REG_TC_EMIFS_CS0_CONFIG
+	str r1, [r0] /* Chip Select 0 */
+	ldr r1, VAL_TC_EMIFS_CS1_CONFIG
+	ldr r0, REG_TC_EMIFS_CS1_CONFIG
+	str r1, [r0] /* Chip Select 1 */
+	ldr r1, VAL_TC_EMIFS_CS2_CONFIG
+	ldr r0, REG_TC_EMIFS_CS2_CONFIG
+	str r1, [r0] /* Chip Select 2 */
+	ldr r1, VAL_TC_EMIFS_CS3_CONFIG
+	ldr r0, REG_TC_EMIFS_CS3_CONFIG
+	str r1, [r0] /* Chip Select 3 */
+
+	/* back to arch calling code */
+	mov	pc, lr
+
+/* the literal pools origin */
+	.ltorg
+
+/* OMAP configuration registers */
+REG_FUNC_MUX_CTRL_0:		/* 32 bits */
+	.word 0xfffe1000
+REG_FUNC_MUX_CTRL_1:		/* 32 bits */
+	.word 0xfffe1004
+REG_FUNC_MUX_CTRL_2:		/* 32 bits */
+	.word 0xfffe1008
+REG_COMP_MODE_CTRL_0:		/* 32 bits */
+	.word 0xfffe100c
+REG_FUNC_MUX_CTRL_3:		/* 32 bits */
+	.word 0xfffe1010
+REG_FUNC_MUX_CTRL_4:		/* 32 bits */
+	.word 0xfffe1014
+REG_FUNC_MUX_CTRL_5:		/* 32 bits */
+	.word 0xfffe1018
+REG_FUNC_MUX_CTRL_6:		/* 32 bits */
+	.word 0xfffe101c
+REG_FUNC_MUX_CTRL_7:		/* 32 bits */
+	.word 0xfffe1020
+REG_FUNC_MUX_CTRL_8:		/* 32 bits */
+	.word 0xfffe1024
+REG_FUNC_MUX_CTRL_9:		/* 32 bits */
+	.word 0xfffe1028
+REG_FUNC_MUX_CTRL_A:		/* 32 bits */
+	.word 0xfffe102C
+REG_FUNC_MUX_CTRL_B:		/* 32 bits */
+	.word 0xfffe1030
+REG_FUNC_MUX_CTRL_C:		/* 32 bits */
+	.word 0xfffe1034
+REG_FUNC_MUX_CTRL_D:		/* 32 bits */
+	.word 0xfffe1038
+REG_PULL_DWN_CTRL_0:		/* 32 bits */
+	.word 0xfffe1040
+REG_PULL_DWN_CTRL_1:		/* 32 bits */
+	.word 0xfffe1044
+REG_PULL_DWN_CTRL_2:		/* 32 bits */
+	.word 0xfffe1048
+REG_PULL_DWN_CTRL_3:		/* 32 bits */
+	.word 0xfffe104c
+REG_VOLTAGE_CTRL_0:		/* 32 bits */
+	.word 0xfffe1060
+REG_TEST_DBG_CTRL_0:		/* 32 bits */
+	.word 0xfffe1070
+REG_MOD_CONF_CTRL_0:		/* 32 bits */
+	.word 0xfffe1080
+REG_TC_IMIF_PRIO:		/* 32 bits */
+	.word 0xfffecc00
+REG_TC_EMIFS_PRIO:		/* 32 bits */
+	.word 0xfffecc04
+REG_TC_EMIFF_PRIO:		/* 32 bits */
+	.word 0xfffecc08
+REG_TC_EMIFS_CONFIG:		/* 32 bits */
+	.word 0xfffecc0c
+REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
+	.word 0xfffecc10
+REG_TC_EMIFS_CS1_CONFIG:	/* 32 bits */
+	.word 0xfffecc14
+REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
+	.word 0xfffecc18
+REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
+	.word 0xfffecc1c
+REG_TC_EMIFF_SDRAM_CONFIG:	/* 32 bits */
+	.word 0xfffecc20
+REG_TC_EMIFF_MRS:		/* 32 bits */
+	.word 0xfffecc24
+/* MPU clock/reset/power mode control registers */
+REG_ARM_CKCTL:			/* 16 bits */
+	.word 0xfffece00
+REG_ARM_IDLECT2:		/* 16 bits */
+	.word 0xfffece08
+REG_ARM_RSTCT2:			/* 16 bits */
+	.word 0xfffece14
+REG_ARM_SYSST:			/* 16 bits */
+	.word 0xfffece18
+/* DPLL control registers */
+REG_DPLL1_CTL:			/* 16 bits */
+	.word 0xfffecf00
+/* identification code register */
+REG_IDCODE:			/* 32 bits */
+	.word 0xfffed404
+
+/* SX1 specific */
+_GPIO_PIN_CONTROL_REG:
+	.word GPIO_PIN_CONTROL_REG
+_GPIO_DIR_CONTROL_REG:
+	.word GPIO_DIR_CONTROL_REG
+_GPIO_DATA_OUTPUT_REG:
+	.word GPIO_DATA_OUTPUT_REG
+
+VAL_COMP_MODE_CTRL_0:
+	.word 0x0000eaef
+VAL_FUNC_MUX_CTRL_4:
+	.word 0x00000000
+VAL_FUNC_MUX_CTRL_5:
+	.word 0x00000000
+VAL_FUNC_MUX_CTRL_6:
+	.word 0x00000001
+VAL_FUNC_MUX_CTRL_7:
+	.word 0x00001000
+VAL_FUNC_MUX_CTRL_8:
+	.word 0x00001240       /*[Knoller]  Value of Symbian Image Wing B2*/
+VAL_FUNC_MUX_CTRL_9:
+	.word 0x00201008
+VAL_FUNC_MUX_CTRL_A:
+	.word 0x00001000
+VAL_FUNC_MUX_CTRL_B:
+	.word 0x00000000
+VAL_FUNC_MUX_CTRL_C:
+	.word 0x09008001       /*[Knoller]  Value of Symbian Image Wing B2*/
+VAL_FUNC_MUX_CTRL_D:
+	.word 0x00000000
+VAL_PULL_DWN_CTRL_0:
+	.word 0xfffeffff
+VAL_PULL_DWN_CTRL_1:
+	.word 0xd1ffffec
+VAL_PULL_DWN_CTRL_2:
+	.word 0xffa80c5b
+VAL_PULL_DWN_CTRL_3:
+	.word 0xffffc0fe
+VAL_VOLTAGE_CTRL_0:
+	.word 0x00000007
+VAL_TEST_DBG_CTRL_0:
+	/* The OMAP5910 TRM says this register must be 0, but HelenConfRegs
+	 * says to write a 7.  Don't know what the right thing is to do, so
+	 * I'm leaving it at 7 since that's what was already here.
+	 */
+	.word 0x00000007
+VAL_MOD_CONF_CTRL_0:
+	.word 0x0da20000       /*[Knoller]  Value of Symbian Image Wing B2*/
+
+VAL_ARM_CKCTL:
+	.word 0x010D
+
+VAL_DPLL1_CTL:
+	.word 0x3A33   /*[Hertle] Value of Symbian Image*/
+
+VAL_TC_EMIFS_CS1_CONFIG_PRELIM:
+	.word 0x00001149
+
+VAL_TC_EMIFS_CS2_CONFIG_PRELIM:
+	.word 0x00004158
+
+VAL_TC_EMIFS_CS0_CONFIG:
+	.word 0x00213090       /*[Knoller]  Value of Symbian Image Wing B2*/
+
+VAL_TC_EMIFS_CS1_CONFIG:
+	.word 0x00215070       /*[Knoller]  Value of Symbian Image Wing B2*/
+
+VAL_TC_EMIFS_CS2_CONFIG:
+	.word 0x00001139       /*[Knoller]  Value of Symbian Image Wing B2*/
+
+VAL_TC_EMIFS_CS3_CONFIG:
+	.word 0x00001139       /*[Knoller]  Value of Symbian Image Wing B2*/
+
+VAL_TC_EMIFF_SDRAM_CONFIG:
+	.word 0x0105f0b4       /*[Knoller]  Value of Symbian Image Wing B2*/
+
+
+VAL_TC_EMIFF_MRS:
+	.word 0x00000027       /*[Knoller]  Value of Symbian Image Wing B2*/
diff --git a/board/sx1/sx1.c b/board/sx1/sx1.c
new file mode 100644
index 0000000000..c14a385b12
--- /dev/null
+++ b/board/sx1/sx1.c
@@ -0,0 +1,125 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+static void flash__init (void);
+static void ether__init (void);
+
+static inline void delay (unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+			  "subs %0, %1, #1\n"
+			  "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* arch number of SX1 Board */
+	gd->bd->bi_arch_number = 241;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x10000100;
+
+/* kk - this speeds up your boot a quite a bit.	 However to make it
+ *  work, you need make sure your kernel startup flush bug is fixed.
+ *  ... rkw ...
+ */
+	icache_enable ();
+
+	flash__init ();
+	ether__init ();
+	return 0;
+}
+
+
+int misc_init_r (void)
+{
+	/* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */
+	/* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */
+
+	/* setup gpio direction to match board (no floats!) */
+	/**gdir = 0xCFF9; */
+	/**mdir = 0x103F; */
+
+	return (0);
+}
+
+/******************************
+ Routine:
+ Description:
+******************************/
+static void flash__init (void)
+{
+#define CS0_CHIP_SELECT_REG 0xfffecc10
+#define CS3_CHIP_SELECT_REG 0xfffecc1c
+#define EMIFS_GlB_Config_REG 0xfffecc0c
+
+	unsigned int regval;
+
+	regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
+	regval = regval | 0x0001;	/* Turn off write protection for flash devices. */
+	if (regval & 0x0002) {
+		regval = regval & 0xfffd;	/* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */
+		/* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */
+		/* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */
+		/* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */
+	}
+	*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
+}
+
+
+/******************************
+ Routine:
+ Description:
+******************************/
+static void ether__init (void)
+{
+#define ETH_CONTROL_REG 0x0800000b
+	/* take the Ethernet controller out of reset and wait
+	 * for the EEPROM load to complete.
+	 */
+	*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
+	udelay (3);
+}
+
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
diff --git a/board/sx1/u-boot.lds b/board/sx1/u-boot.lds
new file mode 100644
index 0000000000..670f4db7bc
--- /dev/null
+++ b/board/sx1/u-boot.lds
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, <wg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text	   :
+	{
+	  cpu/arm925t/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}