diff options
| author | Andre Przywara <andre.przywara@arm.com> | 2024-05-10 00:43:18 +0100 |
|---|---|---|
| committer | Andre Przywara <andre.przywara@arm.com> | 2024-07-15 18:11:13 +0100 |
| commit | 51bee9b5a349b5f39ed39f650e07d16a1b22004f (patch) | |
| tree | c2e38bdb763a75d73e16449c18f49157bc0b7912 /board/sunxi | |
| parent | 5e8af847215969d8675252411bbb386ca8fee91d (diff) | |
| download | u-boot-51bee9b5a349b5f39ed39f650e07d16a1b22004f.tar.gz u-boot-51bee9b5a349b5f39ed39f650e07d16a1b22004f.tar.bz2 u-boot-51bee9b5a349b5f39ed39f650e07d16a1b22004f.zip | |
power: pmic: sunxi: add AXP717 SPL support
On boards using the AXP717 PMIC, the DRAM rail is often not setup
correctly at reset time, so we have to program the PMIC very early in
the SPL, before running the DRAM initialisation.
Using the new generic AXP SPL driver, add the Kconfig options and
platform bits needed to support an AXP717 PMIC chip in I2C mode.
This allows to set up the correct voltage for the DRAM chips and the
CPU cores.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Diffstat (limited to 'board/sunxi')
| -rw-r--r-- | board/sunxi/board.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/board/sunxi/board.c b/board/sunxi/board.c index ed86f1df5d..9928069c0e 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -562,7 +562,7 @@ void sunxi_board_init(void) #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ defined CONFIG_AXP221_POWER || defined CONFIG_AXP305_POWER || \ defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER || \ - defined CONFIG_AXP313_POWER + defined CONFIG_AXP313_POWER || defined CONFIG_AXP717_POWER power_failed = axp_init(); if (IS_ENABLED(CONFIG_AXP_DISABLE_BOOT_ON_POWERON) && !power_failed) { |