* Patch by Denis Peter, 04 June 2003:

  add support for the MIP405T board

2 files changed, 26 insertions, 2 deletions

diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 48ffbee506..aa2ba6f04c 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -59,6 +59,7 @@ int mpl_prg(unsigned long src,unsigned long size)
 	flash_info_t *info;
 	int i,rc;
 #if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
+	char *copystr = (char *)src;
 	unsigned long *magic = (unsigned long *)src;
 #endif
 
@@ -69,8 +70,25 @@ int mpl_prg(unsigned long src,unsigned long size)
 		printf("Bad Magic number\n");
 		return -1;
 	}
-
-  	start = 0 - size;
+	/* some more checks before we delete the Flash... */
+	/* Checking the ISO_STRING prevents to program a
+	 * wrong Firmware Image into the flash.
+	 */
+	i=4; /* skip Magic number */
+	while(1) {
+		if(strncmp(&copystr[i],"MEV-",4)==0)
+			break;
+		if(i++>=0x100) {
+			printf("Firmware Image for unknown Target\n");
+			return -1;
+		}
+	}
+	/* we have the ISO STRING, check */
+	if(strncmp(&copystr[i],CONFIG_ISO_STRING,sizeof(CONFIG_ISO_STRING)-1)!=0) {
+		printf("Wrong Firmware Image: %s\n",&copystr[i]);
+		return -1;
+	}
+	start = 0 - size;
 	for(i=info->sector_count-1;i>0;i--)
 	{
 		info->protect[i] = 0; /* unprotect this sector */
diff --git a/board/mpl/common/pci_parts.h b/board/mpl/common/pci_parts.h
index 944585f356..a8e3232fc0 100644
--- a/board/mpl/common/pci_parts.h
+++ b/board/mpl/common/pci_parts.h
@@ -108,17 +108,23 @@ static struct pci_pip405_config_entry piix4_isa_bridge_f0[] = {
 /* PIIX4 IDE Controller Function 1 */
 static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = {
 	{PCI_COMMAND,		0x0001,		2}, /* enable IO access 	*/
+#if !defined(CONFIG_MIP405T)
 	{PCI_CFG_PIIX4_IDETIM,	0x80008000,	4}, /* enable Both IDE channels	*/
+#else
+	{PCI_CFG_PIIX4_IDETIM,	0x80000000,	4}, /* enable IDE channel0	*/
+#endif
 	{ }					    /* end of device table 	*/
 };
 
 /* PIIX4 USB Controller Function 2 */
 static struct pci_pip405_config_entry piix4_usb_cntrl_f2[] = {
+#if !defined(CONFIG_MIP405T)
 	{PCI_INTERRUPT_LINE,	31,		1}, /* Int vector = 31 		*/
 	{PCI_BASE_ADDRESS_4,	0x0000E001,	4}, /* Set IO Address to 0xe000 to 0xe01F */
 	{PCI_LATENCY_TIMER,	0x80,		1}, /* Latency Timer 0x80 	*/
 	{0xC0,			0x2000,		2}, /* Legacy support 		*/
 	{PCI_COMMAND,		0x0005,		2}, /* enable IO access and Master */
+#endif
 	{ }					    /* end of device table 	*/
 };