ppc: Remove gdsys hrcon boards

These boards have not been converted to CONFIG_DM_MMC, along with other
DM conversions, by the deadline.  Remove them.

Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Tom Rini <trini@konsulko.com>

11 files changed, 3 insertions, 1026 deletions

diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile
index fa4c65c634..dd6d5e69de 100644
--- a/board/gdsys/common/Makefile
+++ b/board/gdsys/common/Makefile
@@ -6,7 +6,6 @@
 obj-$(CONFIG_SYS_FPGA_COMMON) += fpga.o
 obj-$(CONFIG_CMD_IOLOOP) += cmd_ioloop.o
 obj-$(CONFIG_CONTROLCENTERD) += dp501.o
-obj-$(CONFIG_TARGET_HRCON) += osd.o mclink.o dp501.o phy.o ioep-fpga.o fanctrl.o
 obj-$(CONFIG_TARGET_GAZERBEAM) += osd.o ihs_mdio.o ioep-fpga.o
 
 ifdef CONFIG_OSD
diff --git a/board/gdsys/common/fanctrl.c b/board/gdsys/common/fanctrl.c
deleted file mode 100644
index 27c875cbec..0000000000
--- a/board/gdsys/common/fanctrl.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2015
- * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
- */
-
-#ifdef CONFIG_GDSYS_LEGACY_DRIVERS
-
-#include <common.h>
-#include <i2c.h>
-
-enum {
-	FAN_CONFIG = 0x03,
-	FAN_TACHLIM_LSB = 0x48,
-	FAN_TACHLIM_MSB = 0x49,
-	FAN_PWM_FREQ = 0x4D,
-};
-
-void init_fan_controller(u8 addr)
-{
-	int val;
-
-	/* set PWM Frequency to 2.5% resolution */
-	i2c_reg_write(addr, FAN_PWM_FREQ, 20);
-
-	/* set Tachometer Limit */
-	i2c_reg_write(addr, FAN_TACHLIM_LSB, 0x10);
-	i2c_reg_write(addr, FAN_TACHLIM_MSB, 0x0a);
-
-	/* enable Tach input */
-	val = i2c_reg_read(addr, FAN_CONFIG) | 0x04;
-	i2c_reg_write(addr, FAN_CONFIG, val);
-}
-
-#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */
diff --git a/board/gdsys/common/fanctrl.h b/board/gdsys/common/fanctrl.h
deleted file mode 100644
index ab7e58def5..0000000000
--- a/board/gdsys/common/fanctrl.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2015
- * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
- */
-
-#ifndef _FANCTRL_H_
-#define _FANCTRL_H_
-
-void init_fan_controller(u8 addr);
-
-#endif
diff --git a/board/gdsys/common/mclink.c b/board/gdsys/common/mclink.c
deleted file mode 100644
index 6147fbfc87..0000000000
--- a/board/gdsys/common/mclink.c
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2012
- * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
- */
-
-#ifdef CONFIG_GDSYS_LEGACY_DRIVERS
-
-#include <common.h>
-#include <asm/io.h>
-#include <errno.h>
-
-#include <gdsys_fpga.h>
-#include <linux/delay.h>
-
-enum {
-	MCINT_SLAVE_LINK_CHANGED_EV = 1 << 7,
-	MCINT_TX_ERROR_EV = 1 << 9,
-	MCINT_TX_BUFFER_FREE = 1 << 10,
-	MCINT_TX_PACKET_TRANSMITTED_EV = 1 << 11,
-	MCINT_RX_ERROR_EV = 1 << 13,
-	MCINT_RX_CONTENT_AVAILABLE = 1 << 14,
-	MCINT_RX_PACKET_RECEIVED_EV = 1 << 15,
-};
-
-int mclink_probe(void)
-{
-	unsigned int k;
-	int slaves = 0;
-
-	for (k = 0; k < CONFIG_SYS_MCLINK_MAX; ++k) {
-		int timeout = 0;
-		unsigned int ctr = 0;
-		u16 mc_status;
-
-		FPGA_GET_REG(k, mc_status, &mc_status);
-
-		if (!(mc_status & (1 << 15)))
-			break;
-
-		FPGA_SET_REG(k, mc_control, 0x8000);
-
-		FPGA_GET_REG(k, mc_status, &mc_status);
-		while (!(mc_status & (1 << 14))) {
-			udelay(100);
-			if (ctr++ > 500) {
-				timeout = 1;
-				break;
-			}
-			FPGA_GET_REG(k, mc_status, &mc_status);
-		}
-		if (timeout)
-			break;
-
-		printf("waited %d us for mclink %d to come up\n", ctr * 100, k);
-
-		slaves++;
-	}
-
-	return slaves;
-}
-
-int mclink_send(u8 slave, u16 addr, u16 data)
-{
-	unsigned int ctr = 0;
-	u16 int_status;
-	u16 rx_cmd_status;
-	u16 rx_cmd;
-
-	/* reset interrupt status */
-	FPGA_GET_REG(0, mc_int, &int_status);
-	FPGA_SET_REG(0, mc_int, int_status);
-
-	/* send */
-	FPGA_SET_REG(0, mc_tx_address, addr);
-	FPGA_SET_REG(0, mc_tx_data, data);
-	FPGA_SET_REG(0, mc_tx_cmd, (slave & 0x03) << 14);
-	FPGA_SET_REG(0, mc_control, 0x8001);
-
-	/* wait for reply */
-	FPGA_GET_REG(0, mc_int, &int_status);
-	while (!(int_status & MCINT_RX_PACKET_RECEIVED_EV)) {
-		udelay(100);
-		if (ctr++ > 3)
-			return -ETIMEDOUT;
-		FPGA_GET_REG(0, mc_int, &int_status);
-	}
-
-	FPGA_GET_REG(0, mc_rx_cmd_status, &rx_cmd_status);
-	rx_cmd = (rx_cmd_status >> 12) & 0x03;
-	if (rx_cmd != 0)
-		printf("mclink_send: received cmd %d, expected %d\n", rx_cmd,
-		       0);
-
-	return 0;
-}
-
-int mclink_receive(u8 slave, u16 addr, u16 *data)
-{
-	u16 rx_cmd_status;
-	u16 rx_cmd;
-	u16 int_status;
-	unsigned int ctr = 0;
-
-	/* send read request */
-	FPGA_SET_REG(0, mc_tx_address, addr);
-	FPGA_SET_REG(0, mc_tx_cmd,
-		     ((slave & 0x03) << 14) | (1 << 12) | (1 << 0));
-	FPGA_SET_REG(0, mc_control, 0x8001);
-
-
-	/* wait for reply */
-	FPGA_GET_REG(0, mc_int, &int_status);
-	while (!(int_status & MCINT_RX_CONTENT_AVAILABLE)) {
-		udelay(100);
-		if (ctr++ > 3)
-			return -ETIMEDOUT;
-		FPGA_GET_REG(0, mc_int, &int_status);
-	}
-
-	/* check reply */
-	FPGA_GET_REG(0, mc_rx_cmd_status, &rx_cmd_status);
-	if ((rx_cmd_status >> 14) != slave) {
-		printf("mclink_receive: reply from slave %d, expected %d\n",
-		       rx_cmd_status >> 14, slave);
-		return -EINVAL;
-	}
-
-	rx_cmd = (rx_cmd_status >> 12) & 0x03;
-	if (rx_cmd != 1) {
-		printf("mclink_send: received cmd %d, expected %d\n",
-		       rx_cmd, 1);
-		return -EIO;
-	}
-
-	FPGA_GET_REG(0, mc_rx_data, data);
-
-	return 0;
-}
-
-#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */
diff --git a/board/gdsys/common/mclink.h b/board/gdsys/common/mclink.h
deleted file mode 100644
index 4dc4058892..0000000000
--- a/board/gdsys/common/mclink.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2012
- * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
- */
-
-#ifndef _MCLINK_H_
-#define _MCLINK_H_
-
-int mclink_probe(void);
-int mclink_send(u8 slave, u16 addr, u16 data);
-int mclink_receive(u8 slave, u16 addr, u16 *data);
-
-#endif
diff --git a/board/gdsys/common/phy.c b/board/gdsys/common/phy.c
deleted file mode 100644
index 516f4e8edc..0000000000
--- a/board/gdsys/common/phy.c
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2014
- * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
- */
-
-#include <common.h>
-#include <log.h>
-
-#include <miiphy.h>
-
-enum {
-	MIICMD_SET,
-	MIICMD_MODIFY,
-	MIICMD_VERIFY_VALUE,
-	MIICMD_WAIT_FOR_VALUE,
-};
-
-struct mii_setupcmd {
-	u8 token;
-	u8 reg;
-	u16 data;
-	u16 mask;
-	u32 timeout;
-};
-
-/*
- * verify we are talking to a 88e1518
- */
-struct mii_setupcmd verify_88e1518[] = {
-	{ MIICMD_SET, 22, 0x0000 },
-	{ MIICMD_VERIFY_VALUE, 2, 0x0141, 0xffff },
-	{ MIICMD_VERIFY_VALUE, 3, 0x0dd0, 0xfff0 },
-};
-
-/*
- * workaround for erratum mentioned in 88E1518 release notes
- */
-struct mii_setupcmd fixup_88e1518[] = {
-	{ MIICMD_SET, 22, 0x00ff },
-	{ MIICMD_SET, 17, 0x214b },
-	{ MIICMD_SET, 16, 0x2144 },
-	{ MIICMD_SET, 17, 0x0c28 },
-	{ MIICMD_SET, 16, 0x2146 },
-	{ MIICMD_SET, 17, 0xb233 },
-	{ MIICMD_SET, 16, 0x214d },
-	{ MIICMD_SET, 17, 0xcc0c },
-	{ MIICMD_SET, 16, 0x2159 },
-	{ MIICMD_SET, 22, 0x0000 },
-};
-
-/*
- * default initialization:
- * - set RGMII receive timing to "receive clock transition when data stable"
- * - set RGMII transmit timing to "transmit clock internally delayed"
- * - set RGMII output impedance target to 78,8 Ohm
- * - run output impedance calibration
- * - set autonegotiation advertise to 1000FD only
- */
-struct mii_setupcmd default_88e1518[] = {
-	{ MIICMD_SET, 22, 0x0002 },
-	{ MIICMD_MODIFY, 21, 0x0030, 0x0030 },
-	{ MIICMD_MODIFY, 25, 0x0000, 0x0003 },
-	{ MIICMD_MODIFY, 24, 0x8000, 0x8000 },
-	{ MIICMD_WAIT_FOR_VALUE, 24, 0x4000, 0x4000, 2000 },
-	{ MIICMD_SET, 22, 0x0000 },
-	{ MIICMD_MODIFY, 4, 0x0000, 0x01e0 },
-	{ MIICMD_MODIFY, 9, 0x0200, 0x0300 },
-};
-
-/*
- * turn off CLK125 for PHY daughterboard
- */
-struct mii_setupcmd ch1fix_88e1518[] = {
-	{ MIICMD_SET, 22, 0x0002 },
-	{ MIICMD_MODIFY, 16, 0x0006, 0x0006 },
-	{ MIICMD_SET, 22, 0x0000 },
-};
-
-/*
- * perform copper software reset
- */
-struct mii_setupcmd swreset_88e1518[] = {
-	{ MIICMD_SET, 22, 0x0000 },
-	{ MIICMD_MODIFY, 0, 0x8000, 0x8000 },
-	{ MIICMD_WAIT_FOR_VALUE, 0, 0x0000, 0x8000, 2000 },
-};
-
-/*
- * special one for 88E1514:
- * Force SGMII to Copper mode
- */
-struct mii_setupcmd mii_to_copper_88e1514[] = {
-	{ MIICMD_SET, 22, 0x0012 },
-	{ MIICMD_MODIFY, 20, 0x0001, 0x0007 },
-	{ MIICMD_MODIFY, 20, 0x8000, 0x8000 },
-	{ MIICMD_SET, 22, 0x0000 },
-};
-
-/*
- * turn off SGMII auto-negotiation
- */
-struct mii_setupcmd sgmii_autoneg_off_88e1518[] = {
-	{ MIICMD_SET, 22, 0x0001 },
-	{ MIICMD_MODIFY, 0, 0x0000, 0x1000 },
-	{ MIICMD_MODIFY, 0, 0x8000, 0x8000 },
-	{ MIICMD_SET, 22, 0x0000 },
-};
-
-/*
- * invert LED2 polarity
- */
-struct mii_setupcmd invert_led2_88e1514[] = {
-	{ MIICMD_SET, 22, 0x0003 },
-	{ MIICMD_MODIFY, 17, 0x0030, 0x0010 },
-	{ MIICMD_SET, 22, 0x0000 },
-};
-
-static int process_setupcmd(const char *bus, unsigned char addr,
-			    struct mii_setupcmd *setupcmd)
-{
-	int res;
-	u8 reg = setupcmd->reg;
-	u16 data = setupcmd->data;
-	u16 mask = setupcmd->mask;
-	u32 timeout = setupcmd->timeout;
-	u16 orig_data;
-	unsigned long start;
-
-	debug("mii %s:%u reg %2u ", bus, addr, reg);
-
-	switch (setupcmd->token) {
-	case MIICMD_MODIFY:
-		res = miiphy_read(bus, addr, reg, &orig_data);
-		if (res)
-			break;
-		debug("is %04x. (value %04x mask %04x) ", orig_data, data,
-		      mask);
-		data = (orig_data & ~mask) | (data & mask);
-		/* fallthrough */
-	case MIICMD_SET:
-		debug("=> %04x\n", data);
-		res = miiphy_write(bus, addr, reg, data);
-		break;
-	case MIICMD_VERIFY_VALUE:
-		res = miiphy_read(bus, addr, reg, &orig_data);
-		if (res)
-			break;
-		if ((orig_data & mask) != (data & mask))
-			res = -1;
-		debug("(value %04x mask %04x) == %04x? %s\n", data, mask,
-		      orig_data, res ? "FAIL" : "PASS");
-		break;
-	case MIICMD_WAIT_FOR_VALUE:
-		res = -1;
-		start = get_timer(0);
-		while ((res != 0) && (get_timer(start) < timeout)) {
-			res = miiphy_read(bus, addr, reg, &orig_data);
-			if (res)
-				continue;
-			if ((orig_data & mask) != (data & mask))
-				res = -1;
-		}
-		debug("(value %04x mask %04x) == %04x? %s after %lu ms\n", data,
-		      mask, orig_data, res ? "FAIL" : "PASS",
-		      get_timer(start));
-		break;
-	default:
-		res = -1;
-		break;
-	}
-
-	return res;
-}
-
-static int process_setup(const char *bus, unsigned char addr,
-			    struct mii_setupcmd *setupcmd, unsigned int count)
-{
-	int res = 0;
-	unsigned int k;
-
-	for (k = 0; k < count; ++k) {
-		res = process_setupcmd(bus, addr, &setupcmd[k]);
-		if (res) {
-			printf("mii cmd %u on bus %s addr %u failed, aborting setup\n",
-			       setupcmd[k].token, bus, addr);
-			break;
-		}
-	}
-
-	return res;
-}
-
-int setup_88e1518(const char *bus, unsigned char addr)
-{
-	int res;
-
-	res = process_setup(bus, addr,
-			    verify_88e1518, ARRAY_SIZE(verify_88e1518));
-	if (res)
-		return res;
-
-	res = process_setup(bus, addr,
-			    fixup_88e1518, ARRAY_SIZE(fixup_88e1518));
-	if (res)
-		return res;
-
-	res = process_setup(bus, addr,
-			    default_88e1518, ARRAY_SIZE(default_88e1518));
-	if (res)
-		return res;
-
-	if (addr) {
-		res = process_setup(bus, addr,
-				    ch1fix_88e1518, ARRAY_SIZE(ch1fix_88e1518));
-		if (res)
-			return res;
-	}
-
-	res = process_setup(bus, addr,
-			    swreset_88e1518, ARRAY_SIZE(swreset_88e1518));
-	if (res)
-		return res;
-
-	return 0;
-}
-
-int setup_88e1514(const char *bus, unsigned char addr)
-{
-	int res;
-
-	res = process_setup(bus, addr,
-			    verify_88e1518, ARRAY_SIZE(verify_88e1518));
-	if (res)
-		return res;
-
-	res = process_setup(bus, addr,
-			    fixup_88e1518, ARRAY_SIZE(fixup_88e1518));
-	if (res)
-		return res;
-
-	res = process_setup(bus, addr,
-			    mii_to_copper_88e1514,
-			    ARRAY_SIZE(mii_to_copper_88e1514));
-	if (res)
-		return res;
-
-	res = process_setup(bus, addr,
-			    sgmii_autoneg_off_88e1518,
-			    ARRAY_SIZE(sgmii_autoneg_off_88e1518));
-	if (res)
-		return res;
-
-	res = process_setup(bus, addr,
-			    invert_led2_88e1514,
-			    ARRAY_SIZE(invert_led2_88e1514));
-	if (res)
-		return res;
-
-	res = process_setup(bus, addr,
-			    default_88e1518, ARRAY_SIZE(default_88e1518));
-	if (res)
-		return res;
-
-	if (addr) {
-		res = process_setup(bus, addr,
-				    ch1fix_88e1518, ARRAY_SIZE(ch1fix_88e1518));
-		if (res)
-			return res;
-	}
-
-	res = process_setup(bus, addr,
-			    swreset_88e1518, ARRAY_SIZE(swreset_88e1518));
-	if (res)
-		return res;
-
-	return 0;
-}
diff --git a/board/gdsys/common/phy.h b/board/gdsys/common/phy.h
deleted file mode 100644
index e0aa661b9c..0000000000
--- a/board/gdsys/common/phy.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2014
- * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
- */
-
-#ifndef _PHY_H_
-#define _PHY_H_
-
-int setup_88e1514(const char *bus, unsigned char addr);
-int setup_88e1518(const char *bus, unsigned char addr);
-
-#endif
diff --git a/board/gdsys/mpc8308/Kconfig b/board/gdsys/mpc8308/Kconfig
index 1c33f0c982..c3fd0518bc 100644
--- a/board/gdsys/mpc8308/Kconfig
+++ b/board/gdsys/mpc8308/Kconfig
@@ -1,3 +1,5 @@
+if TARGET_GAZERBEAM
+
 config GDSYS_LEGACY_OSD_CMDS
 	bool
 	help
@@ -33,27 +35,6 @@ config SYS_FPGA1_SIZE
 	help
 	  The base address of the second FPGA's register map.
 
-if TARGET_HRCON
-
-config SYS_BOARD
-	default "mpc8308"
-
-config SYS_VENDOR
-	default "gdsys"
-
-config SYS_CONFIG_NAME
-	default "hrcon"
-
-config GDSYS_LEGACY_OSD_CMDS
-	default y
-
-config GDSYS_LEGACY_DRIVERS
-	default y
-
-endif
-
-if TARGET_GAZERBEAM
-
 config SYS_BOARD
 	default "mpc8308"
 
@@ -71,9 +52,6 @@ config SYS_FPGA1_SIZE
 
 config GDSYS_LEGACY_OSD_CMDS
 	default y
-endif
-
-if TARGET_HRCON || TARGET_GAZERBEAM
 
 choice
 	prompt "FPGA flavor selection"
diff --git a/board/gdsys/mpc8308/MAINTAINERS b/board/gdsys/mpc8308/MAINTAINERS
index cc0fbebccd..dc0b389f73 100644
--- a/board/gdsys/mpc8308/MAINTAINERS
+++ b/board/gdsys/mpc8308/MAINTAINERS
@@ -2,7 +2,5 @@ MPC8308 BOARD
 M:	Dirk Eibach <dirk.eibach@gdsys.cc>
 S:	Maintained
 F:	board/gdsys/mpc8308/
-F:	include/configs/hrcon.h
-F:	configs/hrcon_defconfig
-F:	configs/hrcon_dh_defconfig
+F:	include/configs/gazerbeam.h
 F:	configs/gazerbeam_defconfig
diff --git a/board/gdsys/mpc8308/Makefile b/board/gdsys/mpc8308/Makefile
index 578b36653d..f86d997bc7 100644
--- a/board/gdsys/mpc8308/Makefile
+++ b/board/gdsys/mpc8308/Makefile
@@ -4,5 +4,4 @@
 # Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
 
 obj-y := mpc8308.o sdram.o
-obj-$(CONFIG_TARGET_HRCON) += hrcon.o
 obj-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.o
diff --git a/board/gdsys/mpc8308/hrcon.c b/board/gdsys/mpc8308/hrcon.c
deleted file mode 100644
index b5c681c2d1..0000000000
--- a/board/gdsys/mpc8308/hrcon.c
+++ /dev/null
@@ -1,504 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2014
- * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
- */
-
-#include <common.h>
-#include <env.h>
-#include <flash.h>
-#include <hwconfig.h>
-#include <i2c.h>
-#include <init.h>
-#include <spi.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <pci.h>
-#include <mpc83xx.h>
-#include <fsl_esdhc.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_mpc83xx_serdes.h>
-
-#include "mpc8308.h"
-
-#include <gdsys_fpga.h>
-
-#include "../common/ioep-fpga.h"
-#include "../common/osd.h"
-#include "../common/mclink.h"
-#include "../common/phy.h"
-#include "../common/fanctrl.h"
-
-#include <pca953x.h>
-#include <pca9698.h>
-
-#include <miiphy.h>
-
-#define MAX_MUX_CHANNELS 2
-
-enum {
-	MCFPGA_DONE = BIT(0),
-	MCFPGA_INIT_N = BIT(1),
-	MCFPGA_PROGRAM_N = BIT(2),
-	MCFPGA_UPDATE_ENABLE_N = BIT(3),
-	MCFPGA_RESET_N = BIT(4),
-};
-
-enum {
-	GPIO_MDC = 1 << 14,
-	GPIO_MDIO = 1 << 15,
-};
-
-uint mclink_fpgacount;
-struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
-
-struct {
-	u8 bus;
-	u8 addr;
-} hrcon_fans[] = CONFIG_HRCON_FANS;
-
-int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data)
-{
-	int res;
-
-	switch (fpga) {
-	case 0:
-		out_le16(reg, data);
-		break;
-	default:
-		res = mclink_send(fpga - 1, regoff, data);
-		if (res < 0) {
-			printf("mclink_send reg %02lx data %04x returned %d\n",
-			       regoff, data, res);
-			return res;
-		}
-		break;
-	}
-
-	return 0;
-}
-
-int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data)
-{
-	int res;
-
-	switch (fpga) {
-	case 0:
-		*data = in_le16(reg);
-		break;
-	default:
-		if (fpga > mclink_fpgacount)
-			return -EINVAL;
-		res = mclink_receive(fpga - 1, regoff, data);
-		if (res < 0) {
-			printf("mclink_receive reg %02lx returned %d\n",
-			       regoff, res);
-			return res;
-		}
-	}
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char *s = env_get("serial#");
-	bool hw_type_cat = pca9698_get_value(0x20, 20);
-
-	puts("Board: ");
-
-	printf("HRCon %s", hw_type_cat ? "CAT" : "Fiber");
-
-	if (s) {
-		puts(", serial# ");
-		puts(s);
-	}
-
-	puts("\n");
-
-	return 0;
-}
-
-int last_stage_init(void)
-{
-	int slaves;
-	uint k;
-	uchar mclink_controllers[] = { 0x3c, 0x3d, 0x3e };
-	u16 fpga_features;
-	bool hw_type_cat = pca9698_get_value(0x20, 20);
-	bool ch0_rgmii2_present;
-
-	FPGA_GET_REG(0, fpga_features, &fpga_features);
-
-	/* Turn on Parade DP501 */
-	pca9698_direction_output(0x20, 10, 1);
-	pca9698_direction_output(0x20, 11, 1);
-
-	ch0_rgmii2_present = !pca9698_get_value(0x20, 30);
-
-	/* wait for FPGA done, then reset FPGA */
-	for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) {
-		uint ctr = 0;
-
-		if (i2c_probe(mclink_controllers[k]))
-			continue;
-
-		while (!(pca953x_get_val(mclink_controllers[k])
-		       & MCFPGA_DONE)) {
-			mdelay(100);
-			if (ctr++ > 5) {
-				printf("no done for mclink_controller %u\n", k);
-				break;
-			}
-		}
-
-		pca953x_set_dir(mclink_controllers[k], MCFPGA_RESET_N, 0);
-		pca953x_set_val(mclink_controllers[k], MCFPGA_RESET_N, 0);
-		udelay(10);
-		pca953x_set_val(mclink_controllers[k], MCFPGA_RESET_N,
-				MCFPGA_RESET_N);
-	}
-
-	if (hw_type_cat) {
-		uint mux_ch;
-		int retval;
-		struct mii_dev *mdiodev = mdio_alloc();
-
-		if (!mdiodev)
-			return -ENOMEM;
-		strncpy(mdiodev->name, bb_miiphy_buses[0].name, MDIO_NAME_LEN);
-		mdiodev->read = bb_miiphy_read;
-		mdiodev->write = bb_miiphy_write;
-
-		retval = mdio_register(mdiodev);
-		if (retval < 0)
-			return retval;
-		for (mux_ch = 0; mux_ch < MAX_MUX_CHANNELS; ++mux_ch) {
-			if ((mux_ch == 1) && !ch0_rgmii2_present)
-				continue;
-
-			setup_88e1514(bb_miiphy_buses[0].name, mux_ch);
-		}
-	}
-
-	/* give slave-PLLs and Parade DP501 some time to be up and running */
-	mdelay(500);
-
-	mclink_fpgacount = CONFIG_SYS_MCLINK_MAX;
-	slaves = mclink_probe();
-	mclink_fpgacount = 0;
-
-	ioep_fpga_print_info(0);
-	osd_probe(0);
-#ifdef CONFIG_SYS_OSD_DH
-	osd_probe(4);
-#endif
-
-	if (slaves <= 0)
-		return 0;
-
-	mclink_fpgacount = slaves;
-
-	for (k = 1; k <= slaves; ++k) {
-		FPGA_GET_REG(k, fpga_features, &fpga_features);
-
-		ioep_fpga_print_info(k);
-		osd_probe(k);
-#ifdef CONFIG_SYS_OSD_DH
-		osd_probe(k + 4);
-#endif
-		if (hw_type_cat) {
-			int retval;
-			struct mii_dev *mdiodev = mdio_alloc();
-
-			if (!mdiodev)
-				return -ENOMEM;
-			strncpy(mdiodev->name, bb_miiphy_buses[k].name,
-				MDIO_NAME_LEN);
-			mdiodev->read = bb_miiphy_read;
-			mdiodev->write = bb_miiphy_write;
-
-			retval = mdio_register(mdiodev);
-			if (retval < 0)
-				return retval;
-			setup_88e1514(bb_miiphy_buses[k].name, 0);
-		}
-	}
-
-	for (k = 0; k < ARRAY_SIZE(hrcon_fans); ++k) {
-		i2c_set_bus_num(hrcon_fans[k].bus);
-		init_fan_controller(hrcon_fans[k].addr);
-	}
-
-	return 0;
-}
-
-/*
- * provide access to fpga gpios and controls (for I2C bitbang)
- * (these may look all too simple but make iocon.h much more readable)
- */
-void fpga_gpio_set(uint bus, int pin)
-{
-	FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, gpio.set, pin);
-}
-
-void fpga_gpio_clear(uint bus, int pin)
-{
-	FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, gpio.clear, pin);
-}
-
-int fpga_gpio_get(uint bus, int pin)
-{
-	u16 val;
-
-	FPGA_GET_REG(bus >= 4 ? (bus - 4) : bus, gpio.read, &val);
-
-	return val & pin;
-}
-
-void fpga_control_set(uint bus, int pin)
-{
-	u16 val;
-
-	FPGA_GET_REG(bus >= 4 ? (bus - 4) : bus, control, &val);
-	FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, control, val | pin);
-}
-
-void fpga_control_clear(uint bus, int pin)
-{
-	u16 val;
-
-	FPGA_GET_REG(bus >= 4 ? (bus - 4) : bus, control, &val);
-	FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, control, val & ~pin);
-}
-
-void mpc8308_init(void)
-{
-	pca9698_direction_output(0x20, 4, 1);
-}
-
-void mpc8308_set_fpga_reset(uint state)
-{
-	pca9698_set_value(0x20, 4, state ? 0 : 1);
-}
-
-void mpc8308_setup_hw(void)
-{
-	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
-	/*
-	 * set "startup-finished"-gpios
-	 */
-	setbits_be32(&immr->gpio[0].dir, BIT(31 - 11) | BIT(31 - 12));
-	setbits_gpio0_out(BIT(31 - 12));
-}
-
-int mpc8308_get_fpga_done(uint fpga)
-{
-	return pca9698_get_value(0x20, 19);
-}
-
-#ifdef CONFIG_FSL_ESDHC
-int board_mmc_init(struct bd_info *bd)
-{
-	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	sysconf83xx_t *sysconf = &immr->sysconf;
-
-	/* Enable cache snooping in eSDHC system configuration register */
-	out_be32(&sysconf->sdhccr, 0x02000000);
-
-	return fsl_esdhc_mmc_init(bd);
-}
-#endif
-
-static struct pci_region pcie_regions_0[] = {
-	{
-		.bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
-		.phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
-		.size = CONFIG_SYS_PCIE1_MEM_SIZE,
-		.flags = PCI_REGION_MEM,
-	},
-	{
-		.bus_start = CONFIG_SYS_PCIE1_IO_BASE,
-		.phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
-		.size = CONFIG_SYS_PCIE1_IO_SIZE,
-		.flags = PCI_REGION_IO,
-	},
-};
-
-void pci_init_board(void)
-{
-	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	sysconf83xx_t *sysconf = &immr->sysconf;
-	law83xx_t *pcie_law = sysconf->pcielaw;
-	struct pci_region *pcie_reg[] = { pcie_regions_0 };
-
-	fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
-			 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
-
-	/* Deassert the resets in the control register */
-	out_be32(&sysconf->pecr1, 0xE0008000);
-	udelay(2000);
-
-	/* Configure PCI Express Local Access Windows */
-	out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
-	out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
-
-	mpc83xx_pcie_init(1, pcie_reg);
-}
-
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
-	info->portwidth = FLASH_CFI_16BIT;
-	info->chipwidth = FLASH_CFI_BY16;
-	info->interface = FLASH_CFI_X16;
-	return 1;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	ft_cpu_setup(blob, bd);
-	fsl_fdt_fixup_dr_usb(blob, bd);
-	fdt_fixup_esdhc(blob, bd);
-
-	return 0;
-}
-#endif
-
-/*
- * FPGA MII bitbang implementation
- */
-
-struct fpga_mii {
-	uint fpga;
-	int mdio;
-} fpga_mii[] = {
-	{ 0, 1},
-	{ 1, 1},
-	{ 2, 1},
-	{ 3, 1},
-};
-
-static int mii_dummy_init(struct bb_miiphy_bus *bus)
-{
-	return 0;
-}
-
-static int mii_mdio_active(struct bb_miiphy_bus *bus)
-{
-	struct fpga_mii *fpga_mii = bus->priv;
-
-	if (fpga_mii->mdio)
-		FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
-	else
-		FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO);
-
-	return 0;
-}
-
-static int mii_mdio_tristate(struct bb_miiphy_bus *bus)
-{
-	struct fpga_mii *fpga_mii = bus->priv;
-
-	FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
-
-	return 0;
-}
-
-static int mii_set_mdio(struct bb_miiphy_bus *bus, int v)
-{
-	struct fpga_mii *fpga_mii = bus->priv;
-
-	if (v)
-		FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
-	else
-		FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO);
-
-	fpga_mii->mdio = v;
-
-	return 0;
-}
-
-static int mii_get_mdio(struct bb_miiphy_bus *bus, int *v)
-{
-	u16 gpio;
-	struct fpga_mii *fpga_mii = bus->priv;
-
-	FPGA_GET_REG(fpga_mii->fpga, gpio.read, &gpio);
-
-	*v = ((gpio & GPIO_MDIO) != 0);
-
-	return 0;
-}
-
-static int mii_set_mdc(struct bb_miiphy_bus *bus, int v)
-{
-	struct fpga_mii *fpga_mii = bus->priv;
-
-	if (v)
-		FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDC);
-	else
-		FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDC);
-
-	return 0;
-}
-
-static int mii_delay(struct bb_miiphy_bus *bus)
-{
-	udelay(1);
-
-	return 0;
-}
-
-struct bb_miiphy_bus bb_miiphy_buses[] = {
-	{
-		.name = "board0",
-		.init = mii_dummy_init,
-		.mdio_active = mii_mdio_active,
-		.mdio_tristate = mii_mdio_tristate,
-		.set_mdio = mii_set_mdio,
-		.get_mdio = mii_get_mdio,
-		.set_mdc = mii_set_mdc,
-		.delay = mii_delay,
-		.priv = &fpga_mii[0],
-	},
-	{
-		.name = "board1",
-		.init = mii_dummy_init,
-		.mdio_active = mii_mdio_active,
-		.mdio_tristate = mii_mdio_tristate,
-		.set_mdio = mii_set_mdio,
-		.get_mdio = mii_get_mdio,
-		.set_mdc = mii_set_mdc,
-		.delay = mii_delay,
-		.priv = &fpga_mii[1],
-	},
-	{
-		.name = "board2",
-		.init = mii_dummy_init,
-		.mdio_active = mii_mdio_active,
-		.mdio_tristate = mii_mdio_tristate,
-		.set_mdio = mii_set_mdio,
-		.get_mdio = mii_get_mdio,
-		.set_mdc = mii_set_mdc,
-		.delay = mii_delay,
-		.priv = &fpga_mii[2],
-	},
-	{
-		.name = "board3",
-		.init = mii_dummy_init,
-		.mdio_active = mii_mdio_active,
-		.mdio_tristate = mii_mdio_tristate,
-		.set_mdio = mii_set_mdio,
-		.get_mdio = mii_get_mdio,
-		.set_mdc = mii_set_mdc,
-		.delay = mii_delay,
-		.priv = &fpga_mii[3],
-	},
-};
-
-int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses);