Merge tag 'u-boot-imx-20200609' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2020.07
-----------------

- mx53: mx53menlo Convert to DM_ETH, fix fail boot
- imx8mp_evk: fix boot issue
- MX6, display5: fix environment
- drop warnings (watchdog) for i.MX8mm i.mx8mp
- enable bootaux for i.MX8M

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999

2 files changed, 45 insertions, 24 deletions

diff --git a/board/freescale/imx8mp_evk/README b/board/freescale/imx8mp_evk/README
new file mode 100644
index 0000000000..7dd3a9352a
--- /dev/null
+++ b/board/freescale/imx8mp_evk/README
@@ -0,0 +1,41 @@
+U-Boot for the NXP i.MX8MP EVK board
+
+Quick Start
+===========
+- Build the ARM Trusted firmware binary
+- Get the firmware-imx package
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+======================================
+Note: $(srctree) is the U-Boot source directory
+Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
+branch: imx_5.4.3_2.0.0
+$ make PLAT=imx8mp bl31
+$ sudo cp build/imx8mp/release/bl31.bin $(srctree)
+
+Get the ddr firmware
+====================
+$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.7.bin
+$ chmod +x firmware-imx-8.7.bin
+$ ./firmware-imx-8.7
+$ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin
+$ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_201904.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin
+$ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin
+$ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_201904.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin
+
+Build U-Boot
+============
+$ export CROSS_COMPILE=aarch64-poky-linux-
+$ make imx8mp_evk_defconfig
+$ export ATF_LOAD_ADDR=0x960000
+$ make flash.bin
+
+Burn the flash.bin to the MicroSD card at offset 32KB
+$sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=32; sync
+
+Boot
+====
+Set Boot switch to SD boot
+Use /dev/ttyUSB2 for U-Boot console
diff --git a/board/freescale/imx8mp_evk/spl.c b/board/freescale/imx8mp_evk/spl.c
index cd5b32c3f8..3b3a854e29 100644
--- a/board/freescale/imx8mp_evk/spl.c
+++ b/board/freescale/imx8mp_evk/spl.c
@@ -29,11 +29,6 @@
 #include <mmc.h>
 #include <asm/arch/ddr.h>
 
-#include <dm/uclass.h>
-#include <dm/device.h>
-#include <dm/uclass-internal.h>
-#include <dm/device-internal.h>
-
 DECLARE_GLOBAL_DATA_PTR;
 
 int spl_board_boot_device(enum boot_device boot_dev_spl)
@@ -48,16 +43,7 @@ void spl_dram_init(void)
 
 void spl_board_init(void)
 {
-	struct udevice *dev;
-	int ret;
-
 	puts("Normal Boot\n");
-
-	ret = uclass_get_device_by_name(UCLASS_CLK,
-					"clock-controller@30380000",
-					&dev);
-	if (ret < 0)
-		printf("Failed to find clock node. Check device tree\n");
 }
 
 #define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PE)
@@ -118,6 +104,7 @@ int board_fit_config_name_match(const char *name)
 }
 #endif
 
+/* Do not use BSS area in this phase */
 void board_init_f(ulong dummy)
 {
 	int ret;
@@ -128,19 +115,14 @@ void board_init_f(ulong dummy)
 
 	board_early_init_f();
 
-	timer_init();
-
-	preloader_console_init();
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	ret = spl_init();
+	ret = spl_early_init();
 	if (ret) {
 		debug("spl_init() failed: %d\n", ret);
 		hang();
 	}
 
+	preloader_console_init();
+
 	enable_tzc380();
 
 	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
@@ -149,6 +131,4 @@ void board_init_f(ulong dummy)
 
 	/* DDR initialization */
 	spl_dram_init();
-
-	board_init_r(NULL, 0);
 }