rockchip: rk3588: Update USB3 related nodes in u-boot.dtsi

The USB3 related DT nodes in SoC u-boot.dtsi is slightly different from
the final nodes being targeted for Linux kernel v6.10.

Sync USB3 related nodes from Linux maintainer v6.10-rockchip-dts64-1 tag
to prepare for migration of RK3588 to use OF_UPSTREAM.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

4 files changed, 26 insertions, 57 deletions

diff --git a/arch/arm/dts/rk3588-generic-u-boot.dtsi b/arch/arm/dts/rk3588-generic-u-boot.dtsi
index 225dfa0b68..f67301d87a 100644
--- a/arch/arm/dts/rk3588-generic-u-boot.dtsi
+++ b/arch/arm/dts/rk3588-generic-u-boot.dtsi
@@ -14,10 +14,6 @@
 	status = "okay";
 };
 
-&usbdp_phy0_u3 {
-	status = "okay";
-};
-
 &usb_host0_xhci {
 	dr_mode = "peripheral";
 	maximum-speed = "high-speed";
diff --git a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
index 69914f4ce1..8e318e624a 100644
--- a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
+++ b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
@@ -51,18 +51,10 @@
 	status = "okay";
 };
 
-&usbdp_phy1_u3 {
-	status = "okay";
-};
-
 &usbdp_phy0 {
 	status = "okay";
 };
 
-&usbdp_phy0_u3 {
-	status = "okay";
-};
-
 &usb_host0_xhci {
 	dr_mode = "peripheral";
 	maximum-speed = "high-speed";
@@ -70,5 +62,6 @@
 };
 
 &usb_host1_xhci {
+	dr_mode = "host";
 	status = "okay";
 };
diff --git a/arch/arm/dts/rk3588-u-boot.dtsi b/arch/arm/dts/rk3588-u-boot.dtsi
index 992f7b5d66..4623580c61 100644
--- a/arch/arm/dts/rk3588-u-boot.dtsi
+++ b/arch/arm/dts/rk3588-u-boot.dtsi
@@ -13,8 +13,8 @@
 		clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>,
 			 <&cru ACLK_USB3OTG1>;
 		clock-names = "ref_clk", "suspend_clk", "bus_clk";
-		dr_mode = "host";
-		phys = <&u2phy1_otg>, <&usbdp_phy1_u3>;
+		dr_mode = "otg";
+		phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>;
 		phy-names = "usb2-phy", "usb3-phy";
 		phy_type = "utmi_wide";
 		power-domains = <&power RK3588_PD_USB>;
@@ -32,22 +32,21 @@
 	};
 
 	usb2phy1_grf: syscon@fd5d4000 {
-		compatible = "rockchip,rk3588-usb2phy-grf", "syscon",
-			     "simple-mfd";
+		compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xfd5d4000 0x0 0x4000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		u2phy1: usb2-phy@4000 {
+		u2phy1: usb2phy@4000 {
 			compatible = "rockchip,rk3588-usb2phy";
 			reg = <0x4000 0x10>;
-			interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>;
-			resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>;
-			reset-names = "phy", "apb";
+			#clock-cells = <0>;
 			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
 			clock-names = "phyclk";
 			clock-output-names = "usb480m_phy1";
-			#clock-cells = <0>;
+			interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>;
+			reset-names = "phy", "apb";
 			status = "disabled";
 
 			u2phy1_otg: otg-port {
@@ -60,10 +59,7 @@
 	usbdp_phy1: phy@fed90000 {
 		compatible = "rockchip,rk3588-usbdp-phy";
 		reg = <0x0 0xfed90000 0x0 0x10000>;
-		rockchip,u2phy-grf = <&usb2phy1_grf>;
-		rockchip,usb-grf = <&usb_grf>;
-		rockchip,usbdpphy-grf = <&usbdpphy1_grf>;
-		rockchip,vo-grf = <&vo0_grf>;
+		#phy-cells = <1>;
 		clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
 			 <&cru CLK_USBDP_PHY1_IMMORTAL>,
 			 <&cru PCLK_USBDPPHY1>,
@@ -75,16 +71,10 @@
 			 <&cru SRST_USBDP_COMBO_PHY1_PCS>,
 			 <&cru SRST_P_USBDPPHY1>;
 		reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+		rockchip,u2phy-grf = <&usb2phy1_grf>;
+		rockchip,usb-grf = <&usb_grf>;
+		rockchip,usbdpphy-grf = <&usbdpphy1_grf>;
+		rockchip,vo-grf = <&vo0_grf>;
 		status = "disabled";
-
-		usbdp_phy1_dp: dp-port {
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		usbdp_phy1_u3: usb3-port {
-			#phy-cells = <0>;
-			status = "disabled";
-		};
 	};
 };
diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi b/arch/arm/dts/rk3588s-u-boot.dtsi
index d3c257983e..e9d38d5c83 100644
--- a/arch/arm/dts/rk3588s-u-boot.dtsi
+++ b/arch/arm/dts/rk3588s-u-boot.dtsi
@@ -27,7 +27,7 @@
 			 <&cru ACLK_USB3OTG0>;
 		clock-names = "ref_clk", "suspend_clk", "bus_clk";
 		dr_mode = "otg";
-		phys = <&u2phy0_otg>, <&usbdp_phy0_u3>;
+		phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>;
 		phy-names = "usb2-phy", "usb3-phy";
 		phy_type = "utmi_wide";
 		power-domains = <&power RK3588_PD_USB>;
@@ -58,22 +58,21 @@
 	};
 
 	usb2phy0_grf: syscon@fd5d0000 {
-		compatible = "rockchip,rk3588-usb2phy-grf", "syscon",
-			     "simple-mfd";
+		compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xfd5d0000 0x0 0x4000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		u2phy0: usb2-phy@0 {
+		u2phy0: usb2phy@0 {
 			compatible = "rockchip,rk3588-usb2phy";
 			reg = <0x0 0x10>;
-			interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>;
-			resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>;
-			reset-names = "phy", "apb";
+			#clock-cells = <0>;
 			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
 			clock-names = "phyclk";
 			clock-output-names = "usb480m_phy0";
-			#clock-cells = <0>;
+			interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>;
+			reset-names = "phy", "apb";
 			status = "disabled";
 
 			u2phy0_otg: otg-port {
@@ -91,10 +90,7 @@
 	usbdp_phy0: phy@fed80000 {
 		compatible = "rockchip,rk3588-usbdp-phy";
 		reg = <0x0 0xfed80000 0x0 0x10000>;
-		rockchip,u2phy-grf = <&usb2phy0_grf>;
-		rockchip,usb-grf = <&usb_grf>;
-		rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
-		rockchip,vo-grf = <&vo0_grf>;
+		#phy-cells = <1>;
 		clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
 			 <&cru CLK_USBDP_PHY0_IMMORTAL>,
 			 <&cru PCLK_USBDPPHY0>,
@@ -106,17 +102,11 @@
 			 <&cru SRST_USBDP_COMBO_PHY0_PCS>,
 			 <&cru SRST_P_USBDPPHY0>;
 		reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+		rockchip,u2phy-grf = <&usb2phy0_grf>;
+		rockchip,usb-grf = <&usb_grf>;
+		rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
+		rockchip,vo-grf = <&vo0_grf>;
 		status = "disabled";
-
-		usbdp_phy0_dp: dp-port {
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		usbdp_phy0_u3: usb3-port {
-			#phy-cells = <0>;
-			status = "disabled";
-		};
 	};
 };