summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorHeiko Stuebner <heiko.stuebner@theobroma-systems.com>2020-06-05 12:06:40 +0200
committerKever Yang <kever.yang@rock-chips.com>2020-06-07 18:57:16 +0800
commit97fa7847253cda048f290e640c1903130351860d (patch)
treec63fe7bc1fc03376912e0ac664102813a0bc1a99 /arch
parentc4faf85ab6dac96b31355f19c998fc98e95fe8e5 (diff)
downloadu-boot-97fa7847253cda048f290e640c1903130351860d.tar.gz
u-boot-97fa7847253cda048f290e640c1903130351860d.tar.bz2
u-boot-97fa7847253cda048f290e640c1903130351860d.zip
rockchip: puma: reorganize devicetrees to actually work and match upstream
So far the puma dts files only just included the main puma dtsi without handling the actual baseboard and rk3399-puma.dtsi was very much detached from the variant in the mainline Linux kernel. Recent changes resulted in a strange situation with nonworking puma boards. Commit ab800e5a6f28 ("arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi") moved the sdram include from rk3399-puma-ddrX.dts to new files rk3399-puma-ddrx-u-boot.dtsi which were never included anywhere though. Commit 167efc2c7a46 ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux") replaced the rk3399-puma.dtsi nearly completely, but in the kernel it definitly depends on a baseboard dts to actually enable peripherals like sd-slot, uarts, etc. So to untagle this and bring the whole thing more in line with mainline Linux, bring the rk3399-puma-haikou.dts over as well, drop the separate DDR-option devicetrees and instead replace them with a puma Kconfig option to select and include the needed DDR variant. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/dts/Makefile4
-rw-r--r--arch/arm/dts/rk3399-puma-ddr1333-u-boot.dtsi4
-rw-r--r--arch/arm/dts/rk3399-puma-ddr1333.dts8
-rw-r--r--arch/arm/dts/rk3399-puma-ddr1600-u-boot.dtsi4
-rw-r--r--arch/arm/dts/rk3399-puma-ddr1600.dts9
-rw-r--r--arch/arm/dts/rk3399-puma-ddr1866-u-boot.dtsi4
-rw-r--r--arch/arm/dts/rk3399-puma-ddr1866.dts8
-rw-r--r--arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi (renamed from arch/arm/dts/rk3399-puma-u-boot.dtsi)11
-rw-r--r--arch/arm/dts/rk3399-puma-haikou.dts271
9 files changed, 283 insertions, 40 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 61afe94a05..9900b44274 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -131,9 +131,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
rk3399-nanopi-neo4.dtb \
rk3399-orangepi.dtb \
rk3399-pinebook-pro.dtb \
- rk3399-puma-ddr1333.dtb \
- rk3399-puma-ddr1600.dtb \
- rk3399-puma-ddr1866.dtb \
+ rk3399-puma-haikou.dtb \
rk3399-roc-pc.dtb \
rk3399-roc-pc-mezzanine.dtb \
rk3399-rock-pi-4.dtb \
diff --git a/arch/arm/dts/rk3399-puma-ddr1333-u-boot.dtsi b/arch/arm/dts/rk3399-puma-ddr1333-u-boot.dtsi
deleted file mode 100644
index 39d3927f49..0000000000
--- a/arch/arm/dts/rk3399-puma-ddr1333-u-boot.dtsi
+++ /dev/null
@@ -1,4 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include "rk3399-puma-u-boot.dtsi"
-#include "rk3399-sdram-ddr3-1333.dtsi"
diff --git a/arch/arm/dts/rk3399-puma-ddr1333.dts b/arch/arm/dts/rk3399-puma-ddr1333.dts
deleted file mode 100644
index 80f27699f4..0000000000
--- a/arch/arm/dts/rk3399-puma-ddr1333.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-
-#include "rk3399-puma.dtsi"
diff --git a/arch/arm/dts/rk3399-puma-ddr1600-u-boot.dtsi b/arch/arm/dts/rk3399-puma-ddr1600-u-boot.dtsi
deleted file mode 100644
index be58311dc4..0000000000
--- a/arch/arm/dts/rk3399-puma-ddr1600-u-boot.dtsi
+++ /dev/null
@@ -1,4 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include "rk3399-puma-u-boot.dtsi"
-#include "rk3399-sdram-ddr3-1600.dtsi"
diff --git a/arch/arm/dts/rk3399-puma-ddr1600.dts b/arch/arm/dts/rk3399-puma-ddr1600.dts
deleted file mode 100644
index cb76b0165c..0000000000
--- a/arch/arm/dts/rk3399-puma-ddr1600.dts
+++ /dev/null
@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-
-#include "rk3399-puma.dtsi"
-#include "rk3399-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3399-puma-ddr1866-u-boot.dtsi b/arch/arm/dts/rk3399-puma-ddr1866-u-boot.dtsi
deleted file mode 100644
index 48da076329..0000000000
--- a/arch/arm/dts/rk3399-puma-ddr1866-u-boot.dtsi
+++ /dev/null
@@ -1,4 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include "rk3399-puma-u-boot.dtsi"
-#include "rk3399-sdram-ddr3-1866.dtsi"
diff --git a/arch/arm/dts/rk3399-puma-ddr1866.dts b/arch/arm/dts/rk3399-puma-ddr1866.dts
deleted file mode 100644
index 80f27699f4..0000000000
--- a/arch/arm/dts/rk3399-puma-ddr1866.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-
-#include "rk3399-puma.dtsi"
diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
index ddb5fa6e76..29846c4b00 100644
--- a/arch/arm/dts/rk3399-puma-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi
@@ -1,6 +1,17 @@
// SPDX-License-Identifier: GPL-2.0+
#include "rk3399-u-boot.dtsi"
+
+#ifdef CONFIG_TARGET_PUMA_RK3399_RAM_DDR3_1333
+#include "rk3399-sdram-ddr3-1333.dtsi"
+#endif
+#ifdef CONFIG_TARGET_PUMA_RK3399_RAM_DDR3_1600
+#include "rk3399-sdram-ddr3-1600.dtsi"
+#endif
+#ifdef CONFIG_TARGET_PUMA_RK3399_RAM_DDR3_1866
+#include "rk3399-sdram-ddr3-1866.dtsi"
+#endif
+
/ {
config {
u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
diff --git a/arch/arm/dts/rk3399-puma-haikou.dts b/arch/arm/dts/rk3399-puma-haikou.dts
new file mode 100644
index 0000000000..d80d6b7268
--- /dev/null
+++ b/arch/arm/dts/rk3399-puma-haikou.dts
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3399-puma.dtsi"
+
+/ {
+ model = "Theobroma Systems RK3399-Q7 SoM";
+ compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
+
+ sd-card-led {
+ label = "sd_card_led";
+ gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ i2s0-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "Haikou,I2S-codec";
+ simple-audio-card,mclk-fs = <512>;
+
+ simple-audio-card,codec {
+ clocks = <&sgtl5000_clk>;
+ sound-dai = <&sgtl5000>;
+ };
+
+ simple-audio-card,cpu {
+ bitclock-master;
+ frame-master;
+ sound-dai = <&i2s0>;
+ };
+ };
+
+ sgtl5000_clk: sgtl5000-oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc3v3_baseboard: vcc3v3-baseboard {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_baseboard";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_baseboard: vcc5v0-baseboard {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_baseboard";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_otg: vcc5v0-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-name = "vcc5v0_otg";
+ regulator-always-on;
+ };
+
+ vdda_codec: vdda-codec {
+ compatible = "regulator-fixed";
+ regulator-name = "vdda_codec";
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_baseboard>;
+ };
+
+ vddd_codec: vddd-codec {
+ compatible = "regulator-fixed";
+ regulator-name = "vddd_codec";
+ regulator-boot-on;
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1600000>;
+ vin-supply = <&vcc5v0_baseboard>;
+ };
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&sgtl5000_clk>;
+ #sound-dai-cells = <0>;
+ VDDA-supply = <&vdda_codec>;
+ VDDIO-supply = <&vdda_codec>;
+ VDDD-supply = <&vddd_codec>;
+ status = "okay";
+ };
+};
+
+&i2c6 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqn_cpm>;
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&haikou_pin_hog>;
+
+ hog {
+ haikou_pin_hog: haikou-pin-hog {
+ rockchip,pins =
+ /* LID_BTN */
+ <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* BATLOW# */
+ <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* SLP_BTN# */
+ <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* BIOS_DISABLE# */
+ <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ led_sd_haikou: led-sd-gpio {
+ rockchip,pins =
+ <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins =
+ <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v3_baseboard>;
+ status = "okay";
+};
+
+&spi5 {
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_otg>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};