diff options
| author | Michal Simek <michal.simek@xilinx.com> | 2021-08-27 08:48:10 +0200 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2021-08-31 17:47:49 -0400 |
| commit | b4c2c151b14b59a2403675526adf666710cade67 (patch) | |
| tree | 5a77847b716b361589d1df4ddc77ed3c84f340da /arch/arm/mach-sunxi | |
| parent | 7cfbba36e9f84312afe8cd6d12db4e9e9c1e04b5 (diff) | |
| download | u-boot-b4c2c151b14b59a2403675526adf666710cade67.tar.gz u-boot-b4c2c151b14b59a2403675526adf666710cade67.tar.bz2 u-boot-b4c2c151b14b59a2403675526adf666710cade67.zip | |
Kconfig: Remove all default n/no options
default n/no doesn't need to be specified. It is default option anyway.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Rework FSP_USE_UPD portion]
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'arch/arm/mach-sunxi')
| -rw-r--r-- | arch/arm/mach-sunxi/Kconfig | 13 |
1 files changed, 0 insertions, 13 deletions
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 79c669a481..1d4a4fdd0c 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -629,7 +629,6 @@ config SYS_SOC config UART0_PORT_F bool "UART0 on MicroSD breakout board" - default n ---help--- Repurpose the SD card slot for getting access to the UART0 serial console. Primarily useful only for low level u-boot debugging on @@ -640,7 +639,6 @@ config UART0_PORT_F config OLD_SUNXI_KERNEL_COMPAT bool "Enable workarounds for booting old kernels" - default n ---help--- Set this to enable various workarounds for old kernels, this results in sub-optimal settings for newer kernels, only enable if needed. @@ -771,14 +769,12 @@ config I2C0_ENABLE config I2C1_ENABLE bool "Enable I2C/TWI controller 1" - default n select CMD_I2C ---help--- See I2C0_ENABLE help text. config I2C2_ENABLE bool "Enable I2C/TWI controller 2" - default n select CMD_I2C ---help--- See I2C0_ENABLE help text. @@ -786,7 +782,6 @@ config I2C2_ENABLE if MACH_SUN6I || MACH_SUN7I config I2C3_ENABLE bool "Enable I2C/TWI controller 3" - default n select CMD_I2C ---help--- See I2C0_ENABLE help text. @@ -805,7 +800,6 @@ endif if MACH_SUN7I config I2C4_ENABLE bool "Enable I2C/TWI controller 4" - default n select CMD_I2C ---help--- See I2C0_ENABLE help text. @@ -813,7 +807,6 @@ endif config AXP_GPIO bool "Enable support for gpio-s on axp PMICs" - default n ---help--- Say Y here to enable support for the gpio pins of the axp PMIC ICs. @@ -845,14 +838,12 @@ config VIDEO_HDMI config VIDEO_VGA bool "VGA output support" depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN7I) - default n ---help--- Say Y here to add support for outputting video over VGA. config VIDEO_VGA_VIA_LCD bool "VGA via LCD controller support" depends on VIDEO_SUNXI && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I) - default n ---help--- Say Y here to add support for external DACs connected to the parallel LCD interface driving a VGA connector, such as found on the @@ -861,7 +852,6 @@ config VIDEO_VGA_VIA_LCD config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH bool "Force sync active high for VGA via LCD controller support" depends on VIDEO_VGA_VIA_LCD - default n ---help--- Say Y here if you've a board which uses opendrain drivers for the vga hsync and vsync signals. Opendrain drivers cannot generate steep enough @@ -879,7 +869,6 @@ config VIDEO_VGA_EXTERNAL_DAC_EN config VIDEO_COMPOSITE bool "Composite video output support" depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I) - default n ---help--- Say Y here to add support for outputting composite video. @@ -943,7 +932,6 @@ config VIDEO_LCD_BL_PWM_ACTIVE_LOW config VIDEO_LCD_PANEL_I2C bool "LCD panel needs to be configured via i2c" depends on VIDEO_SUNXI - default n select CMD_I2C ---help--- Say y here if the LCD panel needs to be configured via i2c. This @@ -976,7 +964,6 @@ config VIDEO_LCD_IF_LVDS config SUNXI_DE2 bool - default n config VIDEO_DE2 bool "Display Engine 2 video driver" |