diff options
| author | Tom Rini <trini@konsulko.com> | 2020-05-26 15:06:18 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2020-06-04 18:10:02 -0400 |
| commit | e985eb14ac5cff260321519a309f540909b77c16 (patch) | |
| tree | b3e452ad2843b6b8088d781d615bd35709bad659 /README | |
| parent | d16c9d0b3729b1b120caa1b9836660c3bbcd7b87 (diff) | |
| download | u-boot-e985eb14ac5cff260321519a309f540909b77c16.tar.gz u-boot-e985eb14ac5cff260321519a309f540909b77c16.tar.bz2 u-boot-e985eb14ac5cff260321519a309f540909b77c16.zip | |
Convert CONFIG_CMD_ASKENV et al to Kconfig
This converts the following to Kconfig:
CONFIG_CMD_ASKENV
CONFIG_CMD_BMP
CONFIG_CMD_BOOTD
CONFIG_CMD_CACHE
CONFIG_CMD_CRC32
CONFIG_CMD_DHCP
CONFIG_CMD_ENV
CONFIG_CMD_EXPORTENV
CONFIG_CMD_EXT2
CONFIG_CMD_EXT4
CONFIG_CMD_FLASH
CONFIG_CMD_FS_GENERIC
CONFIG_CMD_FUSE
CONFIG_CMD_GPIO
CONFIG_CMD_GPT
CONFIG_CMD_GREPENV
CONFIG_CMD_I2C
CONFIG_CMD_IMLS
CONFIG_CMD_IMPORTENV
CONFIG_CMD_LOADB
CONFIG_CMD_LOADS
CONFIG_CMD_MEMINFO
CONFIG_CMD_MII
CONFIG_CMD_MTDPARTS
CONFIG_CMD_NAND
CONFIG_CMD_NAND_TRIMFFS
CONFIG_CMD_NFS
CONFIG_CMD_PCA953X
CONFIG_CMD_PCA953X_INFO
CONFIG_CMD_PCI
CONFIG_CMD_PING
CONFIG_CMD_READ
CONFIG_CMD_SF
CONFIG_CMD_SPI
CONFIG_CMD_SPL
CONFIG_CMD_SPL_WRITE_SIZE
CONFIG_CMD_TIME
CONFIG_CMD_TRACE
CONFIG_CMD_UBI
CONFIG_CMD_UBIFS
CONFIG_CMD_UNZIP
CONFIG_FS_EXT4
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'README')
| -rw-r--r-- | README | 8 |
1 files changed, 0 insertions, 8 deletions
@@ -1552,14 +1552,6 @@ The following options need to be configured: This enable the NEW i2c subsystem, and will allow you to use i2c commands at the u-boot command line (as long as you set - CONFIG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c - based realtime clock chips or other i2c devices. See - common/cmd_i2c.c for a description of the command line - interface. - - ported i2c driver to the new framework: - - drivers/i2c/soft_i2c.c: - - activate first bus with CONFIG_SYS_I2C_SOFT define CONFIG_SYS_I2C_SOFT_SPEED and CONFIG_SYS_I2C_SOFT_SLAVE for defining speed and slave address - activate second bus with I2C_SOFT_DECLARATIONS2 define |