diff options
| author | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-05-30 14:45:06 +0200 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-05-30 14:45:06 +0200 |
| commit | a19b0dd62d7b8efc658fa1aa685ff5665878f3ee (patch) | |
| tree | 1fadf0fb3da83203ba28f209ec99e1b33e03f4d5 /README | |
| parent | 60985bba58e7695dac1fddae8cdbb62d8cfd1254 (diff) | |
| parent | a71d45d706a5b51c348160163b6c159632273fed (diff) | |
| download | u-boot-a19b0dd62d7b8efc658fa1aa685ff5665878f3ee.tar.gz u-boot-a19b0dd62d7b8efc658fa1aa685ff5665878f3ee.tar.bz2 u-boot-a19b0dd62d7b8efc658fa1aa685ff5665878f3ee.zip | |
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
common/cmd_fpga.c
drivers/usb/host/ohci-at91.c
Diffstat (limited to 'README')
| -rw-r--r-- | README | 10 |
1 files changed, 8 insertions, 2 deletions
@@ -201,7 +201,6 @@ Directory Hierarchy: /mpc5xx Files specific to Freescale MPC5xx CPUs /mpc5xxx Files specific to Freescale MPC5xxx CPUs /mpc8xx Files specific to Freescale MPC8xx CPUs - /mpc8220 Files specific to Freescale MPC8220 CPUs /mpc824x Files specific to Freescale MPC824x CPUs /mpc8260 Files specific to Freescale MPC8260 CPUs /mpc85xx Files specific to Freescale MPC85xx CPUs @@ -899,6 +898,7 @@ The following options need to be configured: CONFIG_CMD_SF * Read/write/erase SPI NOR flash CONFIG_CMD_SHA1SUM print sha1 memory digest (requires CONFIG_CMD_MEMORY) + CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x CONFIG_CMD_SOURCE "source" command Support CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_TFTPSRV * TFTP transfer in server mode @@ -2997,6 +2997,12 @@ FIT uImage format: use an arch-specific makefile fragment instead, for example if more than one image needs to be produced. + CONFIG_FIT_SPL_PRINT + Printing information about a FIT image adds quite a bit of + code to SPL. So this is normally disabled in SPL. Use this + option to re-enable it. This will affect the output of the + bootm command when booting a FIT image. + Modem Support: -------------- @@ -5062,7 +5068,7 @@ On some platforms, it's possible to boot Linux zImage. This is done using the "bootz" command. The syntax of "bootz" command is the same as the syntax of "bootm" command. -Note, defining the CONFIG_SUPPORT_INITRD_RAW allows user to supply +Note, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply kernel with raw initrd images. The syntax is slightly different, the address of the initrd must be augmented by it's size, in the following format: "<initrd addres>:<initrd size>". |