Merge git://git.denx.de/u-boot-x86

12 files changed, 230 insertions, 170 deletions

diff --git a/arch/x86/cpu/baytrail/Kconfig b/arch/x86/cpu/baytrail/Kconfig
index 1c8ac370b3..6c85186486 100644
--- a/arch/x86/cpu/baytrail/Kconfig
+++ b/arch/x86/cpu/baytrail/Kconfig
@@ -17,4 +17,8 @@ config INTERNAL_UART
 	  reason, it is recommended that the UART port be used for
 	  debug purposes only, eg: U-Boot console.
 
+config DEBUG_UART
+	bool
+	select DEBUG_UART_BOARD_INIT
+
 endif
diff --git a/arch/x86/cpu/baytrail/early_uart.c b/arch/x86/cpu/baytrail/early_uart.c
index 471d592b49..afab21f1dd 100644
--- a/arch/x86/cpu/baytrail/early_uart.c
+++ b/arch/x86/cpu/baytrail/early_uart.c
@@ -80,3 +80,8 @@ int setup_internal_uart(int enable)
 
 	return 0;
 }
+
+void board_debug_uart_init(void)
+{
+	setup_internal_uart(1);
+}
diff --git a/arch/x86/cpu/baytrail/fsp_configs.c b/arch/x86/cpu/baytrail/fsp_configs.c
index d49b8d2737..45f9bf95da 100644
--- a/arch/x86/cpu/baytrail/fsp_configs.c
+++ b/arch/x86/cpu/baytrail/fsp_configs.c
@@ -148,10 +148,10 @@ void update_fsp_configs(struct fsp_config_data *config,
 
 	fsp_upd->mrc_init_tseg_size = fdtdec_get_int(blob, node,
 						     "fsp,mrc-init-tseg-size",
-						     0);
+						     MRC_INIT_TSEG_SIZE_1MB);
 	fsp_upd->mrc_init_mmio_size = fdtdec_get_int(blob, node,
 						     "fsp,mrc-init-mmio-size",
-						     0x800);
+						     MRC_INIT_MMIO_SIZE_2048MB);
 	fsp_upd->mrc_init_spd_addr1 = fdtdec_get_int(blob, node,
 						     "fsp,mrc-init-spd-addr1",
 						     0xa0);
@@ -159,7 +159,8 @@ void update_fsp_configs(struct fsp_config_data *config,
 						     "fsp,mrc-init-spd-addr2",
 						     0xa2);
 	fsp_upd->emmc_boot_mode = fdtdec_get_int(blob, node,
-						 "fsp,emmc-boot-mode", 2);
+						 "fsp,emmc-boot-mode",
+						 EMMC_BOOT_MODE_EMMC41);
 	fsp_upd->enable_sdio = fdtdec_get_bool(blob, node, "fsp,enable-sdio");
 	fsp_upd->enable_sdcard = fdtdec_get_bool(blob, node,
 						 "fsp,enable-sdcard");
@@ -169,13 +170,15 @@ void update_fsp_configs(struct fsp_config_data *config,
 						  "fsp,enable-hsuart1");
 	fsp_upd->enable_spi = fdtdec_get_bool(blob, node, "fsp,enable-spi");
 	fsp_upd->enable_sata = fdtdec_get_bool(blob, node, "fsp,enable-sata");
-	fsp_upd->sata_mode = fdtdec_get_int(blob, node, "fsp,sata-mode", 1);
+	fsp_upd->sata_mode = fdtdec_get_int(blob, node, "fsp,sata-mode",
+					    SATA_MODE_AHCI);
 	fsp_upd->enable_azalia = fdtdec_get_bool(blob, node,
 						 "fsp,enable-azalia");
 	fsp_upd->enable_xhci = fdtdec_get_bool(blob, node, "fsp,enable-xhci");
-	fsp_upd->enable_lpe = fdtdec_get_bool(blob, node, "fsp,enable-lpe");
-	fsp_upd->lpss_sio_enable_pci_mode = fdtdec_get_bool(blob, node,
-			"fsp,lpss-sio-enable-pci-mode");
+	fsp_upd->lpe_mode = fdtdec_get_int(blob, node, "fsp,lpe-mode",
+					   LPE_MODE_PCI);
+	fsp_upd->lpss_sio_mode = fdtdec_get_int(blob, node, "fsp,lpss-sio-mode",
+					   LPSS_SIO_MODE_PCI);
 	fsp_upd->enable_dma0 = fdtdec_get_bool(blob, node, "fsp,enable-dma0");
 	fsp_upd->enable_dma1 = fdtdec_get_bool(blob, node, "fsp,enable-dma1");
 	fsp_upd->enable_i2_c0 = fdtdec_get_bool(blob, node, "fsp,enable-i2c0");
@@ -189,25 +192,22 @@ void update_fsp_configs(struct fsp_config_data *config,
 	fsp_upd->enable_pwm1 = fdtdec_get_bool(blob, node, "fsp,enable-pwm1");
 	fsp_upd->enable_hsi = fdtdec_get_bool(blob, node, "fsp,enable-hsi");
 	fsp_upd->igd_dvmt50_pre_alloc = fdtdec_get_int(blob, node,
-			"fsp,igd-dvmt50-pre-alloc", 2);
+			"fsp,igd-dvmt50-pre-alloc", IGD_DVMT50_PRE_ALLOC_64MB);
 	fsp_upd->aperture_size = fdtdec_get_int(blob, node, "fsp,aperture-size",
-						2);
-	fsp_upd->gtt_size = fdtdec_get_int(blob, node, "fsp,gtt-size", 2);
-	fsp_upd->serial_debug_port_address = fdtdec_get_int(blob, node,
-			"fsp,serial-debug-port-address", 0x3f8);
-	fsp_upd->serial_debug_port_type = fdtdec_get_int(blob, node,
-			"fsp,serial-debug-port-type", 1);
+						APERTURE_SIZE_256MB);
+	fsp_upd->gtt_size = fdtdec_get_int(blob, node, "fsp,gtt-size",
+					   GTT_SIZE_2MB);
 	fsp_upd->mrc_debug_msg = fdtdec_get_bool(blob, node,
 						 "fsp,mrc-debug-msg");
 	fsp_upd->isp_enable = fdtdec_get_bool(blob, node, "fsp,isp-enable");
-	fsp_upd->scc_enable_pci_mode = fdtdec_get_bool(blob, node,
-			"fsp,scc-enable-pci-mode");
+	fsp_upd->scc_mode = fdtdec_get_int(blob, node, "fsp,scc-mode",
+					   SCC_MODE_PCI);
 	fsp_upd->igd_render_standby = fdtdec_get_bool(blob, node,
 						      "fsp,igd-render-standby");
 	fsp_upd->txe_uma_enable = fdtdec_get_bool(blob, node,
 						  "fsp,txe-uma-enable");
 	fsp_upd->os_selection = fdtdec_get_int(blob, node, "fsp,os-selection",
-					       4);
+					       OS_SELECTION_LINUX);
 	fsp_upd->emmc45_ddr50_enabled = fdtdec_get_bool(blob, node,
 			"fsp,emmc45-ddr50-enabled");
 	fsp_upd->emmc45_hs200_enabled = fdtdec_get_bool(blob, node,
@@ -228,30 +228,32 @@ void update_fsp_configs(struct fsp_config_data *config,
 		} else {
 			mem->dram_speed = fdtdec_get_int(blob, node,
 							 "fsp,dram-speed",
-							 0x02);
+							 DRAM_SPEED_1333MTS);
 			mem->dram_type = fdtdec_get_int(blob, node,
-							"fsp,dram-type", 0x01);
+							"fsp,dram-type",
+							DRAM_TYPE_DDR3L);
 			mem->dimm_0_enable = fdtdec_get_bool(blob, node,
 					"fsp,dimm-0-enable");
 			mem->dimm_1_enable = fdtdec_get_bool(blob, node,
 					"fsp,dimm-1-enable");
 			mem->dimm_width = fdtdec_get_int(blob, node,
 							 "fsp,dimm-width",
-							 0x00);
+							 DIMM_WIDTH_X8);
 			mem->dimm_density = fdtdec_get_int(blob, node,
 							   "fsp,dimm-density",
-							   0x01);
+							   DIMM_DENSITY_2GBIT);
 			mem->dimm_bus_width = fdtdec_get_int(blob, node,
-					"fsp,dimm-bus-width", 0x03);
+					"fsp,dimm-bus-width",
+					DIMM_BUS_WIDTH_64BITS);
 			mem->dimm_sides = fdtdec_get_int(blob, node,
 							 "fsp,dimm-sides",
-							 0x00);
+							 DIMM_SIDES_1RANKS);
 			mem->dimm_tcl = fdtdec_get_int(blob, node,
 						       "fsp,dimm-tcl", 0x09);
 			mem->dimm_trpt_rcd = fdtdec_get_int(blob, node,
 					"fsp,dimm-trpt-rcd", 0x09);
 			mem->dimm_twr = fdtdec_get_int(blob, node,
-						       "fsp,dimm-twr", 0x0A);
+						       "fsp,dimm-twr", 0x0a);
 			mem->dimm_twtr = fdtdec_get_int(blob, node,
 							"fsp,dimm-twtr", 0x05);
 			mem->dimm_trrd = fdtdec_get_int(blob, node,
diff --git a/arch/x86/dts/bayleybay.dts b/arch/x86/dts/bayleybay.dts
index 1ae058d7a9..0c314e0688 100644
--- a/arch/x86/dts/bayleybay.dts
+++ b/arch/x86/dts/bayleybay.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <asm/arch-baytrail/fsp/fsp_configs.h>
 #include <dt-bindings/gpio/x86-gpio.h>
 #include <dt-bindings/interrupt-router/intel-irq.h>
 
@@ -236,19 +237,19 @@
 
 	fsp {
 		compatible = "intel,baytrail-fsp";
-		fsp,mrc-init-tseg-size = <0>;
-		fsp,mrc-init-mmio-size = <0x800>;
+		fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+		fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
 		fsp,mrc-init-spd-addr1 = <0xa0>;
 		fsp,mrc-init-spd-addr2 = <0xa2>;
-		fsp,emmc-boot-mode = <1>;
+		fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
 		fsp,enable-sdio;
 		fsp,enable-sdcard;
 		fsp,enable-hsuart1;
 		fsp,enable-spi;
 		fsp,enable-sata;
-		fsp,sata-mode = <1>;
-		fsp,enable-lpe;
-		fsp,lpss-sio-enable-pci-mode;
+		fsp,sata-mode = <SATA_MODE_AHCI>;
+		fsp,lpe-mode = <LPE_MODE_PCI>;
+		fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
 		fsp,enable-dma0;
 		fsp,enable-dma1;
 		fsp,enable-i2c0;
@@ -260,13 +261,11 @@
 		fsp,enable-i2c6;
 		fsp,enable-pwm0;
 		fsp,enable-pwm1;
-		fsp,igd-dvmt50-pre-alloc = <2>;
-		fsp,aperture-size = <2>;
-		fsp,gtt-size = <2>;
-		fsp,serial-debug-port-address = <0x3f8>;
-		fsp,serial-debug-port-type = <1>;
-		fsp,scc-enable-pci-mode;
-		fsp,os-selection = <4>;
+		fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+		fsp,aperture-size = <APERTURE_SIZE_256MB>;
+		fsp,gtt-size = <GTT_SIZE_2MB>;
+		fsp,scc-mode = <SCC_MODE_PCI>;
+		fsp,os-selection = <OS_SELECTION_LINUX>;
 		fsp,emmc45-ddr50-enabled;
 		fsp,emmc45-retune-timer-value = <8>;
 		fsp,enable-igd;
diff --git a/arch/x86/dts/baytrail_som-db5800-som-6867.dts b/arch/x86/dts/baytrail_som-db5800-som-6867.dts
index aa8bfb8651..171e7ffee6 100644
--- a/arch/x86/dts/baytrail_som-db5800-som-6867.dts
+++ b/arch/x86/dts/baytrail_som-db5800-som-6867.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 
+#include <asm/arch-baytrail/fsp/fsp_configs.h>
 #include <dt-bindings/gpio/x86-gpio.h>
 #include <dt-bindings/interrupt-router/intel-irq.h>
 
@@ -259,15 +260,15 @@
 
 	fsp {
 		compatible = "intel,baytrail-fsp";
-		fsp,mrc-init-tseg-size = <0>;
-		fsp,mrc-init-mmio-size = <0x800>;
+		fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+		fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
 		fsp,mrc-init-spd-addr1 = <0xa0>;
 		fsp,mrc-init-spd-addr2 = <0xa2>;
 		fsp,enable-spi;
 		fsp,enable-sata;
-		fsp,sata-mode = <1>;
+		fsp,sata-mode = <SATA_MODE_AHCI>;
 		fsp,enable-azalia;
-		fsp,lpss-sio-enable-pci-mode;
+		fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
 		fsp,enable-dma0;
 		fsp,enable-dma1;
 		fsp,enable-i2c0;
@@ -279,14 +280,12 @@
 		fsp,enable-i2c6;
 		fsp,enable-pwm0;
 		fsp,enable-pwm1;
-		fsp,igd-dvmt50-pre-alloc = <2>;
-		fsp,aperture-size = <2>;
-		fsp,gtt-size = <2>;
-		fsp,scc-enable-pci-mode;
-		fsp,os-selection = <4>;
+		fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+		fsp,aperture-size = <APERTURE_SIZE_256MB>;
+		fsp,gtt-size = <GTT_SIZE_2MB>;
+		fsp,scc-mode = <SCC_MODE_PCI>;
+		fsp,os-selection = <OS_SELECTION_LINUX>;
 		fsp,enable-igd;
-		fsp,serial-debug-port-address = <0x3f8>;
-		fsp,serial-debug-port-type = <1>;
 	};
 
 	microcode {
diff --git a/arch/x86/dts/conga-qeval20-qa3-e3845.dts b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
index 898e9c9b5f..ae11ccc25a 100644
--- a/arch/x86/dts/conga-qeval20-qa3-e3845.dts
+++ b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 
+#include <asm/arch-baytrail/fsp/fsp_configs.h>
 #include <dt-bindings/gpio/x86-gpio.h>
 #include <dt-bindings/interrupt-router/intel-irq.h>
 
@@ -246,42 +247,42 @@
 
 	fsp {
 		compatible = "intel,baytrail-fsp";
-		fsp,mrc-init-tseg-size = <0>;
-		fsp,mrc-init-mmio-size = <0x800>;
+		fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+		fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
 		fsp,mrc-init-spd-addr1 = <0xa0>;
 		fsp,mrc-init-spd-addr2 = <0xa2>;
-		fsp,emmc-boot-mode = <1>;
+		fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
 		fsp,enable-sdio;
 		fsp,enable-sdcard;
 		fsp,enable-hsuart1;
 		fsp,enable-spi;
 		fsp,enable-sata;
-		fsp,sata-mode = <1>;
-		fsp,enable-lpe;
-		fsp,lpss-sio-enable-pci-mode;
+		fsp,sata-mode = <SATA_MODE_AHCI>;
+		fsp,lpe-mode = <LPE_MODE_PCI>;
+		fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
 		fsp,enable-dma0;
 		fsp,enable-dma1;
 		fsp,enable-pwm0;
 		fsp,enable-pwm1;
-		fsp,igd-dvmt50-pre-alloc = <2>;
-		fsp,aperture-size = <2>;
-		fsp,gtt-size = <2>;
-		fsp,scc-enable-pci-mode;
-		fsp,os-selection = <4>;
+		fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+		fsp,aperture-size = <APERTURE_SIZE_256MB>;
+		fsp,gtt-size = <GTT_SIZE_2MB>;
+		fsp,scc-mode = <SCC_MODE_PCI>;
+		fsp,os-selection = <OS_SELECTION_LINUX>;
 		fsp,emmc45-ddr50-enabled;
 		fsp,emmc45-retune-timer-value = <8>;
 		fsp,enable-igd;
 		fsp,enable-memory-down;
 		fsp,memory-down-params {
 			compatible = "intel,baytrail-fsp-mdp";
-			fsp,dram-speed = <2>;		/* 2=1333MHz */
-			fsp,dram-type = <1>;		/* 1=DDR3L */
+			fsp,dram-speed = <DRAM_SPEED_1333MTS>;
+			fsp,dram-type = <DRAM_TYPE_DDR3L>;
 			fsp,dimm-0-enable;
 			fsp,dimm-1-enable;
-			fsp,dimm-width = <1>;		/* 1=x16, 2=x32 */
-			fsp,dimm-density = <2>;		/* 2=4Gbit */
-			fsp,dimm-bus-width = <3>;	/* 3=64bits */
-			fsp,dimm-sides = <0>;		/* 0=1 ranks -> 0x2b */
+			fsp,dimm-width = <DIMM_WIDTH_X16>;
+			fsp,dimm-density = <DIMM_DENSITY_4GBIT>;
+			fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
+			fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
 
 			/* These following values might need a re-visit */
 			fsp,dimm-tcl = <8>;
diff --git a/arch/x86/dts/dfi-bt700.dtsi b/arch/x86/dts/dfi-bt700.dtsi
index 546981a9ac..04aa95ad52 100644
--- a/arch/x86/dts/dfi-bt700.dtsi
+++ b/arch/x86/dts/dfi-bt700.dtsi
@@ -5,6 +5,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include <asm/arch-baytrail/fsp/fsp_configs.h>
 #include <dt-bindings/gpio/x86-gpio.h>
 #include <dt-bindings/interrupt-router/intel-irq.h>
 
@@ -248,20 +249,20 @@
 
 	fsp {
 		compatible = "intel,baytrail-fsp";
-		fsp,mrc-init-tseg-size = <0>;
-		fsp,mrc-init-mmio-size = <0x800>;
+		fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+		fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
 		fsp,mrc-init-spd-addr1 = <0xa0>;
 		fsp,mrc-init-spd-addr2 = <0xa2>;
-		fsp,emmc-boot-mode = <1>;
+		fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
 		fsp,enable-sdio;
 		fsp,enable-sdcard;
 		fsp,enable-hsuart0;
 		fsp,enable-hsuart1;
 		fsp,enable-spi;
 		fsp,enable-sata;
-		fsp,sata-mode = <1>;
-		fsp,enable-lpe;
-		fsp,lpss-sio-enable-pci-mode;
+		fsp,sata-mode = <SATA_MODE_AHCI>;
+		fsp,lpe-mode = <LPE_MODE_PCI>;
+		fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
 		fsp,enable-dma0;
 		fsp,enable-dma1;
 		fsp,enable-i2c0;
@@ -273,24 +274,24 @@
 		fsp,enable-i2c6;
 		fsp,enable-pwm0;
 		fsp,enable-pwm1;
-		fsp,igd-dvmt50-pre-alloc = <2>;
-		fsp,aperture-size = <2>;
-		fsp,gtt-size = <2>;
-		fsp,scc-enable-pci-mode;
-		fsp,os-selection = <4>;
+		fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+		fsp,aperture-size = <APERTURE_SIZE_256MB>;
+		fsp,gtt-size = <GTT_SIZE_2MB>;
+		fsp,scc-mode = <SCC_MODE_PCI>;
+		fsp,os-selection = <OS_SELECTION_LINUX>;
 		fsp,emmc45-ddr50-enabled;
 		fsp,emmc45-retune-timer-value = <8>;
 		fsp,enable-igd;
 		fsp,enable-memory-down;
 		fsp,memory-down-params {
 			compatible = "intel,baytrail-fsp-mdp";
-			fsp,dram-speed = <2>;		/* 2=1333MHz */
-			fsp,dram-type = <1>;		/* 1=DDR3L */
+			fsp,dram-speed = <DRAM_SPEED_1333MTS>;
+			fsp,dram-type = <DRAM_TYPE_DDR3L>;
 			fsp,dimm-0-enable;
-			fsp,dimm-width = <1>;		/* 1=x16, 2=x32 */
-			fsp,dimm-density = <3>;		/* 3=8Gbit */
-			fsp,dimm-bus-width = <3>;	/* 3=64bits */
-			fsp,dimm-sides = <0>;		/* 0=1 ranks -> 0x2b */
+			fsp,dimm-width = <DIMM_WIDTH_X16>;
+			fsp,dimm-density = <DIMM_DENSITY_8GBIT>;
+			fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
+			fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
 
 			/* These following values might need a re-visit */
 			fsp,dimm-tcl = <8>;
diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts
index af64c6859c..4c0a8fe26f 100644
--- a/arch/x86/dts/minnowmax.dts
+++ b/arch/x86/dts/minnowmax.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <asm/arch-baytrail/fsp/fsp_configs.h>
 #include <dt-bindings/gpio/x86-gpio.h>
 #include <dt-bindings/interrupt-router/intel-irq.h>
 
@@ -260,19 +261,19 @@
 
 	fsp {
 		compatible = "intel,baytrail-fsp";
-		fsp,mrc-init-tseg-size = <0>;
-		fsp,mrc-init-mmio-size = <0x800>;
+		fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+		fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
 		fsp,mrc-init-spd-addr1 = <0xa0>;
 		fsp,mrc-init-spd-addr2 = <0xa2>;
-		fsp,emmc-boot-mode = <1>;
+		fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
 		fsp,enable-sdio;
 		fsp,enable-sdcard;
 		fsp,enable-hsuart1;
 		fsp,enable-spi;
 		fsp,enable-sata;
-		fsp,sata-mode = <1>;
-		fsp,enable-lpe;
-		fsp,lpss-sio-enable-pci-mode;
+		fsp,sata-mode = <SATA_MODE_AHCI>;
+		fsp,lpe-mode = <LPE_MODE_PCI>;
+		fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
 		fsp,enable-dma0;
 		fsp,enable-dma1;
 		fsp,enable-i2c0;
@@ -284,26 +285,24 @@
 		fsp,enable-i2c6;
 		fsp,enable-pwm0;
 		fsp,enable-pwm1;
-		fsp,igd-dvmt50-pre-alloc = <2>;
-		fsp,aperture-size = <2>;
-		fsp,gtt-size = <2>;
-		fsp,serial-debug-port-address = <0x3f8>;
-		fsp,serial-debug-port-type = <1>;
-		fsp,scc-enable-pci-mode;
-		fsp,os-selection = <4>;
+		fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+		fsp,aperture-size = <APERTURE_SIZE_256MB>;
+		fsp,gtt-size = <GTT_SIZE_2MB>;
+		fsp,scc-mode = <SCC_MODE_PCI>;
+		fsp,os-selection = <OS_SELECTION_LINUX>;
 		fsp,emmc45-ddr50-enabled;
 		fsp,emmc45-retune-timer-value = <8>;
 		fsp,enable-igd;
 		fsp,enable-memory-down;
 		fsp,memory-down-params {
 			compatible = "intel,baytrail-fsp-mdp";
-			fsp,dram-speed = <1>;
-			fsp,dram-type = <1>;
+			fsp,dram-speed = <DRAM_SPEED_1066MTS>;
+			fsp,dram-type = <DRAM_TYPE_DDR3L>;
 			fsp,dimm-0-enable;
-			fsp,dimm-width = <1>;
-			fsp,dimm-density = <2>;
-			fsp,dimm-bus-width = <3>;
-			fsp,dimm-sides = <0>;
+			fsp,dimm-width = <DIMM_WIDTH_X16>;
+			fsp,dimm-density = <DIMM_DENSITY_4GBIT>;
+			fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
+			fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
 			fsp,dimm-tcl = <0xb>;
 			fsp,dimm-trpt-rcd = <0xb>;
 			fsp,dimm-twr = <0xc>;
diff --git a/arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h b/arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h
index e539890c33..1c6c2479f0 100644
--- a/arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h
+++ b/arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h
@@ -7,6 +7,7 @@
 #ifndef __FSP_CONFIGS_H__
 #define __FSP_CONFIGS_H__
 
+#ifndef __ASSEMBLY__
 struct fsp_config_data {
 	struct fsp_cfg_common	common;
 	struct upd_region	fsp_upd;
@@ -15,5 +16,91 @@ struct fsp_config_data {
 struct fspinit_rtbuf {
 	struct common_buf	common;	/* FSP common runtime data structure */
 };
+#endif
+
+/* FSP user configuration settings */
+
+#define MRC_INIT_TSEG_SIZE_1MB		1
+#define MRC_INIT_TSEG_SIZE_2MB		2
+#define MRC_INIT_TSEG_SIZE_4MB		4
+#define MRC_INIT_TSEG_SIZE_8MB		8
+
+#define MRC_INIT_MMIO_SIZE_1024MB	0x400
+#define MRC_INIT_MMIO_SIZE_1536MB	0x600
+#define MRC_INIT_MMIO_SIZE_2048MB	0x800
+
+#define EMMC_BOOT_MODE_DISABLED		0
+#define EMMC_BOOT_MODE_AUTO		1
+#define EMMC_BOOT_MODE_EMMC41		2
+#define EMMC_BOOT_MODE_EMCC45		3
+
+#define SATA_MODE_IDE			0
+#define SATA_MODE_AHCI			1
+
+#define IGD_DVMT50_PRE_ALLOC_32MB	0x01
+#define IGD_DVMT50_PRE_ALLOC_64MB	0x02
+#define IGD_DVMT50_PRE_ALLOC_96MB	0x03
+#define IGD_DVMT50_PRE_ALLOC_128MB	0x04
+#define IGD_DVMT50_PRE_ALLOC_160MB	0x05
+#define IGD_DVMT50_PRE_ALLOC_192MB	0x06
+#define IGD_DVMT50_PRE_ALLOC_224MB	0x07
+#define IGD_DVMT50_PRE_ALLOC_256MB	0x08
+#define IGD_DVMT50_PRE_ALLOC_288MB	0x09
+#define IGD_DVMT50_PRE_ALLOC_320MB	0x0a
+#define IGD_DVMT50_PRE_ALLOC_352MB	0x0b
+#define IGD_DVMT50_PRE_ALLOC_384MB	0x0c
+#define IGD_DVMT50_PRE_ALLOC_416MB	0x0d
+#define IGD_DVMT50_PRE_ALLOC_448MB	0x0e
+#define IGD_DVMT50_PRE_ALLOC_480MB	0x0f
+#define IGD_DVMT50_PRE_ALLOC_512MB	0x10
+
+#define APERTURE_SIZE_128MB		1
+#define APERTURE_SIZE_256MB		2
+#define APERTURE_SIZE_512MB		3
+
+#define GTT_SIZE_1MB			1
+#define GTT_SIZE_2MB			2
+
+#define OS_SELECTION_ANDROID		1
+#define OS_SELECTION_LINUX		4
+
+#define DRAM_SPEED_800MTS		0
+#define DRAM_SPEED_1066MTS		1
+#define DRAM_SPEED_1333MTS		2
+#define DRAM_SPEED_1600MTS		3
+
+#define DRAM_TYPE_DDR3			0
+#define DRAM_TYPE_DDR3L			1
+#define DRAM_TYPE_DDR3ECC		2
+#define DRAM_TYPE_LPDDR2		4
+#define DRAM_TYPE_LPDDR3		5
+#define DRAM_TYPE_DDR4			6
+
+#define DIMM_WIDTH_X8			0
+#define DIMM_WIDTH_X16			1
+#define DIMM_WIDTH_X32			2
+
+#define DIMM_DENSITY_1GBIT		0
+#define DIMM_DENSITY_2GBIT		1
+#define DIMM_DENSITY_4GBIT		2
+#define DIMM_DENSITY_8GBIT		3
+
+#define DIMM_BUS_WIDTH_8BITS		0
+#define DIMM_BUS_WIDTH_16BITS		1
+#define DIMM_BUS_WIDTH_32BITS		2
+#define DIMM_BUS_WIDTH_64BITS		3
+
+#define DIMM_SIDES_1RANKS		0
+#define DIMM_SIDES_2RANKS		1
+
+#define LPE_MODE_DISABLED		0
+#define LPE_MODE_PCI			1
+#define LPE_MODE_ACPI			2
+
+#define LPSS_SIO_MODE_ACPI		0
+#define LPSS_SIO_MODE_PCI		1
+
+#define SCC_MODE_ACPI			0
+#define SCC_MODE_PCI			1
 
 #endif /* __FSP_CONFIGS_H__ */
diff --git a/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h b/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h
index 3c782a86e3..8c07b3747f 100644
--- a/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h
+++ b/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h
@@ -47,8 +47,8 @@ struct __packed upd_region {
 	uint8_t enable_azalia;			/* Offset 0x002f */
 	uint32_t azalia_config_ptr;		/* Offset 0x0030 */
 	uint8_t enable_xhci;			/* Offset 0x0034 */
-	uint8_t enable_lpe;			/* Offset 0x0035 */
-	uint8_t lpss_sio_enable_pci_mode;	/* Offset 0x0036 */
+	uint8_t lpe_mode;			/* Offset 0x0035 */
+	uint8_t lpss_sio_mode;			/* Offset 0x0036 */
 	uint8_t enable_dma0;			/* Offset 0x0037 */
 	uint8_t enable_dma1;			/* Offset 0x0038 */
 	uint8_t enable_i2_c0;			/* Offset 0x0039 */
@@ -64,11 +64,10 @@ struct __packed upd_region {
 	uint8_t igd_dvmt50_pre_alloc;		/* Offset 0x0043 */
 	uint8_t aperture_size;			/* Offset 0x0044 */
 	uint8_t gtt_size;			/* Offset 0x0045 */
-	uint32_t serial_debug_port_address;	/* Offset 0x0046 */
-	uint8_t serial_debug_port_type;		/* Offset 0x004a */
+	uint8_t reserved2[5];			/* Offset 0x0046 */
 	uint8_t mrc_debug_msg;			/* Offset 0x004b */
 	uint8_t isp_enable;			/* Offset 0x004c */
-	uint8_t scc_enable_pci_mode;		/* Offset 0x004d */
+	uint8_t scc_mode;			/* Offset 0x004d */
 	uint8_t igd_render_standby;		/* Offset 0x004e */
 	uint8_t txe_uma_enable;			/* Offset 0x004f */
 	uint8_t os_selection;			/* Offset 0x0050 */
diff --git a/arch/x86/lib/fsp/fsp_support.c b/arch/x86/lib/fsp/fsp_support.c
index a480361211..ab8340c871 100644
--- a/arch/x86/lib/fsp/fsp_support.c
+++ b/arch/x86/lib/fsp/fsp_support.c
@@ -110,10 +110,6 @@ void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf)
 	struct upd_region *fsp_upd;
 #endif
 
-#ifdef CONFIG_INTERNAL_UART
-	setup_internal_uart(1);
-#endif
-
 	fsp_hdr = find_fsp_header();
 	if (fsp_hdr == NULL) {
 		/* No valid FSP info header was found */
diff --git a/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt b/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
index 07fa46ef7e..929ae88c58 100644
--- a/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
+++ b/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
@@ -6,8 +6,8 @@ UPD data for configuring the SoC.
 
 All properties can be found within the `upd-region` struct in
 arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h, under the same names, and in
-Intel's FSP Binary Configuration Tool for Bay Trail.  This list of properties is
-matched up to Intel's E3800 FSPv4 release.
+Intel's FSP Binary Configuration Tool for Bay Trail.  This list of properties
+is matched up to Intel's E3800 FSPv4 release.
 
 # Boolean properties:
 
@@ -19,8 +19,6 @@ matched up to Intel's E3800 FSPv4 release.
 - fsp,enable-sata
 - fsp,enable-azalia
 - fsp,enable-xhci
-- fsp,enable-lpe
-- fsp,lpss-sio-enable-pci-mode
 - fsp,enable-dma0
 - fsp,enable-dma1
 - fsp,enable-i2-c0
@@ -35,7 +33,6 @@ matched up to Intel's E3800 FSPv4 release.
 - fsp,enable-hsi
 - fsp,mrc-debug-msg
 - fsp,isp-enable
-- fsp,scc-enable-pci-mode
 - fsp,igd-render-standby
 - fsp,txe-uma-enable
 - fsp,emmc45-ddr50-enabled
@@ -44,8 +41,8 @@ matched up to Intel's E3800 FSPv4 release.
 - fsp,enable-memory-down
 
 If you set "fsp,enable-memory-down" you are strongly encouraged to provide an
-"fsp,memory-down-params{};" to specify how your memory is configured.  If you do
-not set "fsp,enable-memory-down", then the DIMM SPD information will be
+"fsp,memory-down-params{};" to specify how your memory is configured.  If you
+do not set "fsp,enable-memory-down", then the DIMM SPD information will be
 discovered by the FSP and used to setup main memory.
 
 
@@ -57,11 +54,12 @@ discovered by the FSP and used to setup main memory.
 - fsp,mrc-init-spd-addr2
 - fsp,emmc-boot-mode
 - fsp,sata-mode
+- fsp,lpe-mode
+- fsp,lpss-sio-mode
 - fsp,igd-dvmt50-pre-alloc
 - fsp,aperture-size
 - fsp,gtt-size
-- fsp,serial-debug-port-address
-- fsp,serial-debug-port-type
+- fsp,scc-mode
 - fsp,os-selection
 - fsp,emmc45-retune-timer-value
 
@@ -74,41 +72,12 @@ discovered by the FSP and used to setup main memory.
 
 	# Integer properties:
 
-	- fsp,dram-speed:
-	  0x0: "800 MHz"
-	  0x1: "1066 MHz"
-	  0x2: "1333 MHz"
-	  0x3: "1600 MHz"
-
+	- fsp,dram-speed
 	- fsp,dram-type
-	  0x0: "DDR3"
-	  0x1: "DDR3L"
-	  0x2: "DDR3U"
-	  0x4: "LPDDR2"
-	  0x5: "LPDDR3"
-	  0x6: "DDR4"
-
 	- fsp,dimm-width
-	  0x0: "x8"
-	  0x1: "x16"
-	  0x2: "x32"
-
 	- fsp,dimm-density
-	  0x0: "1 Gbit"
-	  0x1: "2 Gbit"
-	  0x2: "4 Gbit"
-	  0x3: "8 Gbit"
-
 	- fsp,dimm-bus-width
-	  0x0: "8 bits"
-	  0x1: "16 bits"
-	  0x2: "32 bits"
-	  0x3: "64 bits"
-
 	- fsp,dimm-sides
-	  0x0: "1 rank"
-	  0x1: "2 ranks"
-
 	- fsp,dimm-tcl
 	- fsp,dimm-trpt-rcd
 	- fsp,dimm-twr
@@ -118,6 +87,9 @@ discovered by the FSP and used to setup main memory.
 	- fsp,dimm-tfaw
 };
 
+For all integer properties, available options are listed in fsp_configs.h in
+arch/x86/include/asm/arch-baytrail/fsp directory (eg: MRC_INIT_TSEG_SIZE_1MB).
+
 
 Example (from MinnowMax Dual Core):
 -----------------------------------
@@ -127,20 +99,19 @@ Example (from MinnowMax Dual Core):
 
 	fsp {
 		compatible = "intel,baytrail-fsp";
-		fsp,mrc-init-tseg-size = <0>;
-		fsp,mrc-init-mmio-size = <0x800>;
+		fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+		fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
 		fsp,mrc-init-spd-addr1 = <0xa0>;
 		fsp,mrc-init-spd-addr2 = <0xa2>;
-		fsp,emmc-boot-mode = <2>;
+		fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
 		fsp,enable-sdio;
 		fsp,enable-sdcard;
 		fsp,enable-hsuart1;
 		fsp,enable-spi;
 		fsp,enable-sata;
-		fsp,sata-mode = <1>;
-		fsp,enable-xhci;
-		fsp,enable-lpe;
-		fsp,lpss-sio-enable-pci-mode;
+		fsp,sata-mode = <SATA_MODE_AHCI>;
+		fsp,lpe-mode = <LPE_MODE_PCI>;
+		fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
 		fsp,enable-dma0;
 		fsp,enable-dma1;
 		fsp,enable-i2c0;
@@ -152,27 +123,24 @@ Example (from MinnowMax Dual Core):
 		fsp,enable-i2c6;
 		fsp,enable-pwm0;
 		fsp,enable-pwm1;
-		fsp,igd-dvmt50-pre-alloc = <2>;
-		fsp,aperture-size = <2>;
-		fsp,gtt-size = <2>;
-		fsp,serial-debug-port-address = <0x3f8>;
-		fsp,serial-debug-port-type = <1>;
-		fsp,mrc-debug-msg;
-		fsp,scc-enable-pci-mode;
-		fsp,os-selection = <4>;
+		fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+		fsp,aperture-size = <APERTURE_SIZE_256MB>;
+		fsp,gtt-size = <GTT_SIZE_2MB>;
+		fsp,scc-mode = <SCC_MODE_PCI>;
+		fsp,os-selection = <OS_SELECTION_LINUX>;
 		fsp,emmc45-ddr50-enabled;
 		fsp,emmc45-retune-timer-value = <8>;
 		fsp,enable-igd;
 		fsp,enable-memory-down;
 		fsp,memory-down-params {
 			compatible = "intel,baytrail-fsp-mdp";
-			fsp,dram-speed = <1>;
-			fsp,dram-type = <1>;
+			fsp,dram-speed = <DRAM_SPEED_1066MTS>;
+			fsp,dram-type = <DRAM_TYPE_DDR3L>;
 			fsp,dimm-0-enable;
-			fsp,dimm-width = <1>;
-			fsp,dimm-density = <2>;
-			fsp,dimm-bus-width = <3>;
-			fsp,dimm-sides = <0>;
+			fsp,dimm-width = <DIMM_WIDTH_X16>;
+			fsp,dimm-density = <DIMM_DENSITY_4GBIT>;
+			fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
+			fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
 			fsp,dimm-tcl = <0xb>;
 			fsp,dimm-trpt-rcd = <0xb>;
 			fsp,dimm-twr = <0xc>;