summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMarek Vasut <marek.vasut+renesas@mailbox.org>2023-01-26 21:01:32 +0100
committerMarek Vasut <marek.vasut+renesas@gmail.com>2023-02-02 01:49:19 +0100
commit71d2a5e5ef04a598d5b9da24d4d58a2ae3f662f6 (patch)
treebaddbcc30617aa6f032b0a5f790cf73353e8ace2
parent9696b246e611d5b1ff6642234ac22235e20f313f (diff)
downloadu-boot-71d2a5e5ef04a598d5b9da24d4d58a2ae3f662f6.tar.gz
u-boot-71d2a5e5ef04a598d5b9da24d4d58a2ae3f662f6.tar.bz2
u-boot-71d2a5e5ef04a598d5b9da24d4d58a2ae3f662f6.zip
ARM: dts: rmobile: Synchronize DTs with Linux 6.1.7
Synchronize R-Car device trees with Linux 6.1.7, commit 21e996306a6afaae88295858de0ffb8955173a15 . The following script has been used for the synchronization: $ for i in $(cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) ; do if [ -e /linux-2.6/arch/arm64/boot/dts/renesas/$i ] ; then cp /linux-2.6/arch/arm64/boot/dts/renesas/$i arch/arm/dts/ ; elif [ -e /linux-2.6/arch/arm/boot/dts/$i ] ; then cp /linux-2.6/arch/arm/boot/dts/$i arch/arm/dts/ else echo "NOT FOUND: $i" fi done $ git add $( ( cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) | tr " " "\n" | sed 's@^@arch/arm/dts/@g' ) Move the include/dt-bindings/{clk,clock}/versaclock.h header used by the renesas boards to match Linux 6.1.y as well. Keep arch/arm/dts/r8a774c0-u-boot.dtsi sdhi3 node as it is now used by the arch/arm/dts/r8a774c0-cat874.dts board. Pick s@spi-flash@flash@ change in arch/arm/dts/r8a779a0-falcon-u-boot.dts from "ARM: dts: Synchronize R-Car V3U DTs with Linux 5.18.3" . Adjust R8A77990 Ebisu CONFIG_SYS_MMC_ENV_DEV from 2 to 0 to reflect the card enumeration in ebisu.dtsi /aliases DT node . Adjust R8A7795 and R8A7796 ULCB CONFIG_SYS_MMC_ENV_DEV from 1 to 0 to reflect the card enumeration in ulcb.dtsi /aliases DT node . Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> # r8a779a0-falcon-u-boot.dts Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> # r8a779a0-falcon-u-boot.dts
-rw-r--r--arch/arm/dts/beacon-renesom-baseboard.dtsi27
-rw-r--r--arch/arm/dts/beacon-renesom-som.dtsi9
-rw-r--r--arch/arm/dts/cat875.dtsi5
-rw-r--r--arch/arm/dts/condor-common.dtsi548
-rw-r--r--arch/arm/dts/draak.dtsi744
-rw-r--r--arch/arm/dts/ebisu.dtsi869
-rw-r--r--arch/arm/dts/hihope-rev4.dtsi10
-rw-r--r--arch/arm/dts/hihope-rzg2-ex.dtsi7
-rw-r--r--arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts8
-rw-r--r--arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts2
-rw-r--r--arch/arm/dts/r8a774a1-hihope-rzg2m.dts2
-rw-r--r--arch/arm/dts/r8a774a1.dtsi66
-rw-r--r--arch/arm/dts/r8a774b1-beacon-rzg2n-kit.dts2
-rw-r--r--arch/arm/dts/r8a774b1.dtsi42
-rw-r--r--arch/arm/dts/r8a774c0-cat874.dts10
-rw-r--r--arch/arm/dts/r8a774c0-ek874.dts2
-rw-r--r--arch/arm/dts/r8a774c0-u-boot.dtsi1
-rw-r--r--arch/arm/dts/r8a774c0.dtsi66
-rw-r--r--arch/arm/dts/r8a774e1-beacon-rzg2h-kit.dts2
-rw-r--r--arch/arm/dts/r8a774e1.dtsi43
-rw-r--r--arch/arm/dts/r8a7790-lager.dts27
-rw-r--r--arch/arm/dts/r8a7790-stout.dts11
-rw-r--r--arch/arm/dts/r8a7790.dtsi45
-rw-r--r--arch/arm/dts/r8a7791-koelsch.dts27
-rw-r--r--arch/arm/dts/r8a7791-porter.dts14
-rw-r--r--arch/arm/dts/r8a7791.dtsi121
-rw-r--r--arch/arm/dts/r8a7792-blanche.dts14
-rw-r--r--arch/arm/dts/r8a7792.dtsi16
-rw-r--r--arch/arm/dts/r8a7793-gose.dts33
-rw-r--r--arch/arm/dts/r8a7793.dtsi33
-rw-r--r--arch/arm/dts/r8a7794-alt.dts53
-rw-r--r--arch/arm/dts/r8a7794-silk.dts26
-rw-r--r--arch/arm/dts/r8a7794.dtsi35
-rw-r--r--arch/arm/dts/r8a77950-salvator-x.dts108
-rw-r--r--arch/arm/dts/r8a77950-ulcb.dts2
-rw-r--r--arch/arm/dts/r8a77950.dtsi27
-rw-r--r--arch/arm/dts/r8a77951.dtsi259
-rw-r--r--arch/arm/dts/r8a77960-salvator-x.dts46
-rw-r--r--arch/arm/dts/r8a77960-ulcb.dts2
-rw-r--r--arch/arm/dts/r8a77960.dtsi212
-rw-r--r--arch/arm/dts/r8a77965-salvator-x.dts45
-rw-r--r--arch/arm/dts/r8a77965-ulcb.dts2
-rw-r--r--arch/arm/dts/r8a77965.dtsi338
-rw-r--r--arch/arm/dts/r8a77970-eagle.dts193
-rw-r--r--arch/arm/dts/r8a77970.dtsi53
-rw-r--r--arch/arm/dts/r8a77980-condor.dts274
-rw-r--r--arch/arm/dts/r8a77980.dtsi92
-rw-r--r--arch/arm/dts/r8a77990-ebisu.dts743
-rw-r--r--arch/arm/dts/r8a77990.dtsi335
-rw-r--r--arch/arm/dts/r8a77995-draak.dts516
-rw-r--r--arch/arm/dts/r8a77995.dtsi372
-rw-r--r--arch/arm/dts/r8a779a0-falcon-cpu.dtsi233
-rw-r--r--arch/arm/dts/r8a779a0-falcon-csi-dsi.dtsi265
-rw-r--r--arch/arm/dts/r8a779a0-falcon-ethernet.dtsi15
-rw-r--r--arch/arm/dts/r8a779a0-falcon-u-boot.dts2
-rw-r--r--arch/arm/dts/r8a779a0-falcon.dts76
-rw-r--r--arch/arm/dts/r8a779a0.dtsi2001
-rw-r--r--arch/arm/dts/ulcb.dtsi103
-rw-r--r--configs/r8a77990_ebisu_defconfig2
-rw-r--r--configs/rcar3_ulcb_defconfig2
-rw-r--r--drivers/clk/clk_versaclock.c2
-rw-r--r--include/dt-bindings/clock/versaclock.h (renamed from include/dt-bindings/clk/versaclock.h)0
62 files changed, 6853 insertions, 2387 deletions
diff --git a/arch/arm/dts/beacon-renesom-baseboard.dtsi b/arch/arm/dts/beacon-renesom-baseboard.dtsi
index 2692cc64bf..8166e3c1ff 100644
--- a/arch/arm/dts/beacon-renesom-baseboard.dtsi
+++ b/arch/arm/dts/beacon-renesom-baseboard.dtsi
@@ -5,7 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/clk/versaclock.h>
+#include <dt-bindings/clock/versaclock.h>
/ {
backlight_lvds: backlight-lvds {
@@ -146,7 +146,7 @@
};
};
- reg_audio: regulator_audio {
+ reg_audio: regulator-audio {
compatible = "regulator-fixed";
regulator-name = "audio-1.8V";
regulator-min-microvolt = <1800000>;
@@ -174,7 +174,7 @@
vin-supply = <&reg_lcd>;
};
- reg_cam0: regulator_camera {
+ reg_cam0: regulator-cam0 {
compatible = "regulator-fixed";
regulator-name = "reg_cam0";
regulator-min-microvolt = <1800000>;
@@ -183,7 +183,7 @@
enable-active-high;
};
- reg_cam1: regulator_camera {
+ reg_cam1: regulator-cam1 {
compatible = "regulator-fixed";
regulator-name = "reg_cam1";
regulator-min-microvolt = <1800000>;
@@ -272,8 +272,14 @@
status = "okay";
};
-&du_out_rgb {
- remote-endpoint = <&rgb_panel>;
+&du {
+ ports {
+ port@0 {
+ du_out_rgb: endpoint {
+ remote-endpoint = <&rgb_panel>;
+ };
+ };
+ };
};
&ehci0 {
@@ -359,11 +365,10 @@
clocks = <&x304_clk>;
clock-names = "xin";
- assigned-clocks = <&versaclock6_bb 1>,
- <&versaclock6_bb 2>,
- <&versaclock6_bb 3>,
- <&versaclock6_bb 4>;
- assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24576000>;
+ assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>,
+ <&versaclock6_bb 3>, <&versaclock6_bb 4>;
+ assigned-clock-rates = <24000000>, <24000000>, <24000000>,
+ <24576000>;
OUT1 {
idt,mode = <VC5_CMOS>;
diff --git a/arch/arm/dts/beacon-renesom-som.dtsi b/arch/arm/dts/beacon-renesom-som.dtsi
index 0d136809eb..d3fc8ffd5b 100644
--- a/arch/arm/dts/beacon-renesom-som.dtsi
+++ b/arch/arm/dts/beacon-renesom-som.dtsi
@@ -4,7 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/versaclock.h>
+#include <dt-bindings/clock/versaclock.h>
/ {
memory@48000000 {
@@ -20,7 +20,7 @@
clock-output-names = "osc_32k";
};
- reg_1p8v: regulator0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
@@ -29,7 +29,7 @@
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
@@ -77,7 +77,7 @@
};
&gpio6 {
- usb_hub_reset {
+ usb-hub-reset-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-high;
@@ -293,7 +293,6 @@
vqmmc-supply = <&reg_1p8v>;
non-removable;
cap-power-off-card;
- pm-ignore-notify;
keep-power-in-suspend;
mmc-pwrseq = <&wlan_pwrseq>;
status = "okay";
diff --git a/arch/arm/dts/cat875.dtsi b/arch/arm/dts/cat875.dtsi
index 4a2f6fa955..8c9da8b4bd 100644
--- a/arch/arm/dts/cat875.dtsi
+++ b/arch/arm/dts/cat875.dtsi
@@ -2,7 +2,7 @@
/*
* Device Tree Source for the Silicon Linux sub board for CAT874 (CAT875)
*
- * Copyright (C) 2021 Renesas Electronics Corp.
+ * Copyright (C) 2019 Renesas Electronics Corp.
*/
/ {
@@ -18,9 +18,12 @@
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
status = "okay";
phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id001c.c915",
+ "ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/dts/condor-common.dtsi b/arch/arm/dts/condor-common.dtsi
new file mode 100644
index 0000000000..dfbe35bf46
--- /dev/null
+++ b/arch/arm/dts/condor-common.dtsi
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Condor board with R-Car V3H
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ serial0 = &scif0;
+ ethernet0 = &gether;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ d1_8v: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ d3_3v: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "D3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&d3_3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0 0x48000000 0 0x78000000>;
+ };
+
+ vddq_vin01: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDQ_VIN01";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ x1_clk: x1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+};
+
+&canfd {
+ pinctrl-0 = <&canfd0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ };
+};
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max9286_out0>;
+ };
+ };
+ };
+};
+
+&csi41 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ csi41_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max9286_out1>;
+ };
+ };
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&x1_clk>;
+ clock-names = "du.0", "dclkin.0";
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&gether {
+ pinctrl-0 = <&gether_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+ renesas,no-ether-link;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ io_expander0: gpio@20 {
+ compatible = "onnn,pca9654";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ io_expander1: gpio@21 {
+ compatible = "onnn,pca9654";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ bgvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ gmsl0: gmsl-deserializer@48 {
+ compatible = "maxim,max9286";
+ reg = <0x48>;
+
+ maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ max9286_out0: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ status = "disabled";
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ status = "disabled";
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ status = "disabled";
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ status = "disabled";
+ };
+ };
+ };
+
+ gmsl1: gmsl-deserializer@4a {
+ compatible = "maxim,max9286";
+ reg = <0x4a>;
+
+ maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ max9286_out1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi41_in>;
+ };
+ };
+ };
+
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ status = "disabled";
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ status = "disabled";
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ status = "disabled";
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ status = "disabled";
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
+&mmc0 {
+ pinctrl-0 = <&mmc_pins>;
+ pinctrl-1 = <&mmc_pins>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&d3_3v>;
+ vqmmc-supply = <&vddq_vin01>;
+ mmc-hs200-1_8v;
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pfc {
+ canfd0_pins: canfd0 {
+ groups = "canfd0_data_a";
+ function = "canfd0";
+ };
+
+ gether_pins: gether {
+ groups = "gether_mdio_a", "gether_rgmii",
+ "gether_txcrefclk", "gether_txcrefclk_mega";
+ function = "gether";
+ };
+
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
+ mmc_pins: mmc {
+ groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ qspi0_pins: qspi0 {
+ groups = "qspi0_ctrl", "qspi0_data4";
+ function = "qspi0";
+ };
+
+ scif0_pins: scif0 {
+ groups = "scif0_data";
+ function = "scif0";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_b";
+ function = "scif_clk";
+ };
+};
+
+&rpc {
+ pinctrl-0 = <&qspi0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "spansion,s25fs512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ cr7@40000 {
+ reg = <0x00040000 0x080000>;
+ read-only;
+ };
+ cert_header_sa3@c0000 {
+ reg = <0x000c0000 0x080000>;
+ read-only;
+ };
+ bl2@140000 {
+ reg = <0x00140000 0x040000>;
+ read-only;
+ };
+ cert_header_sa6@180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@1c0000 {
+ reg = <0x001c0000 0x460000>;
+ read-only;
+ };
+ uboot@640000 {
+ reg = <0x00640000 0x0c0000>;
+ read-only;
+ };
+ uboot-env@700000 {
+ reg = <0x00700000 0x040000>;
+ read-only;
+ };
+ dtb@740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user@1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
+ };
+ };
+ };
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
diff --git a/arch/arm/dts/draak.dtsi b/arch/arm/dts/draak.dtsi
new file mode 100644
index 0000000000..ef3bb835d5
--- /dev/null
+++ b/arch/arm/dts/draak.dtsi
@@ -0,0 +1,744 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Draak board
+ *
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Renesas Draak board";
+ compatible = "renesas,draak";
+
+ aliases {
+ serial0 = &scif2;
+ ethernet0 = &avb;
+ };
+
+ audio_clkout: audio-clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 50000>;
+
+ brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+ default-brightness-level = <10>;
+
+ power-supply = <&reg_12p0v>;
+ enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+ stdout-path = "serial0:115200n8";
+ };
+
+ composite-in {
+ compatible = "composite-video-connector";
+
+ port {
+ composite_con_in: endpoint {
+ remote-endpoint = <&adv7180_in>;
+ };
+ };
+ };
+
+ hdmi-in {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&adv7612_in>;
+ };
+ };
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keys_pins>;
+ pinctrl-names = "default";
+
+ key-1 {
+ gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW56-1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-2 {
+ gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW56-2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-3 {
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW56-3";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-4 {
+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_4>;
+ label = "SW56-4";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&reg_3p3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x18000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_12p0v: regulator-12p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "D12.0V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sound_card: sound {
+ compatible = "audio-graph-card";
+
+ dais = <&rsnd_port0 /* ak4613 */
+ /* HDMI is not yet supported */
+ >;
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
+
+ x19_clk: x19 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+};
+
+&audio_clk_b {
+ /*
+ * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB,
+ * and R-Car Sound uses AUDIO_CLKB.
+ * Note is that schematic indicates VI4_FIELD conection only
+ * not AUDIO_CLKB at SoC page.
+ * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60.
+ * SW60 should be 1-2.
+ */
+
+ clock-frequency = <22579200>;
+};
+
+&avb {
+ pinctrl-0 = <&avb0_pins>;
+ pinctrl-names = "default";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
+ /*
+ * TX clock internal delay mode is required for reliable
+ * 1Gbps communication using the KSZ9031RNX phy present on
+ * the Draak board, however, TX clock internal delay mode
+ * isn't supported on R-Car D3(e). Thus, limit speed to
+ * 100Mbps for reliable communication.
+ */
+ max-speed = <100>;
+ };
+};
+
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&x12_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0";
+
+ ports {
+ port@0 {
+ du_out_rgb: endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ };
+};
+
+&ehci0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <48000000>;
+};
+
+&hsusb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 0>; /* audio_clkout */
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+
+ port {
+ ak4613_endpoint: endpoint {
+ remote-endpoint = <&rsnd_for_ak4613>;
+ };
+ };
+ };
+
+ composite-in@20 {
+ compatible = "adi,adv7180cp";
+ reg = <0x20>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7180_in: endpoint {
+ remote-endpoint = <&composite_con_in>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ /*
+ * The VIN4 video input path is shared between
+ * CVBS and HDMI inputs through SW[49-53]
+ * switches.
+ *
+ * CVBS is the default selection, link it to
+ * VIN4 here.
+ */
+ adv7180_out: endpoint {
+ remote-endpoint = <&vin4_in>;
+ };
+ };
+ };
+
+ };
+
+ hdmi-encoder@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
+ reg-names = "main", "edid", "cec", "packet";
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ hdmi-decoder@4c {
+ compatible = "adi,adv7612";
+ reg = <0x4c>;
+ default-input = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7612_in: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ /*
+ * The VIN4 video input path is shared between
+ * CVBS and HDMI inputs through SW[49-53]
+ * switches.
+ *
+ * CVBS is the default selection, leave HDMI
+ * not connected here.
+ */
+ adv7612_out: endpoint {
+ pclk-sample = <0>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
+ };
+
+ cs2000: clk-multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+
+ eeprom@50 {
+ compatible = "rohm,br24t01", "atmel,24c01";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&lvds0 {
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>,
+ <&x12_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
+&lvds1 {
+ /*
+ * Even though the LVDS1 output is not connected, the encoder must be
+ * enabled to supply a pixel clock to the DU for the DPAD output when
+ * LVDS0 is in use.
+ */
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>,
+ <&x12_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&pfc {
+ avb0_pins: avb {
+ groups = "avb0_link", "avb0_mdio", "avb0_mii";
+ function = "avb0";
+ };
+
+ can0_pins: can0 {
+ groups = "can0_data_a";
+ function = "can0";
+ };
+
+ can1_pins: can1 {
+ groups = "can1_data_a";
+ function = "can1";
+ };
+
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ function = "du";
+ };
+
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
+ keys_pins: keys {
+ pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15";
+ bias-pull-up;
+ };
+
+ pwm0_pins: pwm0 {
+ groups = "pwm0_c";
+ function = "pwm0";
+ };
+
+ pwm1_pins: pwm1 {
+ groups = "pwm1_c";
+ function = "pwm1";
+ };
+
+ rpc_pins: rpc {
+ groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
+ "rpc_int";
+ function = "rpc";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data";
+ function = "scif2";
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ sound_pins: sound {
+ groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound-clk {
+ groups = "audio_clk_a", "audio_clk_b",
+ "audio_clkout", "audio_clkout1";
+ function = "audio_clk";
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ vin4_pins_cvbs: vin4 {
+ groups = "vin4_data8", "vin4_sync", "vin4_clk";
+ function = "vin4";
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1 */
+ #clock-cells = <1>;
+ clock-frequency = <12288000 11289600>;
+
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
+ <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&cs2000>, <&audio_clk_b>,
+ <&cpg CPG_CORE R8A77995_CLK_ZA2>;
+
+ ports {
+ rsnd_port0: port {
+ rsnd_for_ak4613: endpoint {
+ remote-endpoint = <&ak4613_endpoint>;
+ dai-format = "left_j";
+ bitclock-master = <&rsnd_for_ak4613>;
+ frame-master = <&rsnd_for_ak4613>;
+ playback = <&ssi3>, <&src5>, <&dvc0>;
+ capture = <&ssi4>, <&src6>, <&dvc1>;
+ };
+ };
+ };
+};
+
+&rpc {
+ pinctrl-0 = <&rpc_pins>;
+ pinctrl-names = "default";
+
+ /* Left disabled. To be enabled by firmware when unlocked. */
+
+ flash@0 {
+ compatible = "cypress,hyperflash", "cfi-flash";
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ bl2@40000 {
+ reg = <0x00040000 0x140000>;
+ read-only;
+ };
+ cert_header_sa6@180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@1c0000 {
+ reg = <0x001c0000 0x040000>;
+ read-only;
+ };
+ tee@200000 {
+ reg = <0x00200000 0x440000>;
+ read-only;
+ };
+ uboot@640000 {
+ reg = <0x00640000 0x100000>;
+ read-only;
+ };
+ dtb@740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user@1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
+ };
+ };
+ };
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi2 {
+ /* used for on-board eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+};
+
+&ssi4 {
+ shared-pin;
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ renesas,no-otg-pins;
+ status = "okay";
+};
+
+&vin4 {
+ pinctrl-0 = <&vin4_pins_cvbs>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ ports {
+ port {
+ vin4_in: endpoint {
+ remote-endpoint = <&adv7180_out>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/dts/ebisu.dtsi b/arch/arm/dts/ebisu.dtsi
new file mode 100644
index 0000000000..bbc29452d1
--- /dev/null
+++ b/arch/arm/dts/ebisu.dtsi
@@ -0,0 +1,869 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Ebisu board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Renesas Ebisu board";
+ compatible = "renesas,ebisu";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ serial0 = &scif2;
+ ethernet0 = &avb;
+ mmc0 = &sdhi3;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi1;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+ stdout-path = "serial0:115200n8";
+ };
+
+ audio_clkout: audio-clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 50000>;
+
+ brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+ default-brightness-level = <10>;
+
+ power-supply = <&reg_12p0v>;
+ };
+
+ cvbs-in {
+ compatible = "composite-video-connector";
+ label = "CVBS IN";
+
+ port {
+ cvbs_con: endpoint {
+ remote-endpoint = <&adv7482_ain7>;
+ };
+ };
+ };
+
+ hdmi-in {
+ compatible = "hdmi-connector";
+ label = "HDMI IN";
+ type = "a";
+
+ port {
+ hdmi_in_con: endpoint {
+ remote-endpoint = <&adv7482_hdmi>;
+ };
+ };
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keys_pins>;
+ pinctrl-names = "default";
+
+ key-1 {
+ gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW4-1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-2 {
+ gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW4-2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-3 {
+ gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW4-3";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-4 {
+ gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_4>;
+ label = "SW4-4";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&reg_3p3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_12p0v: regulator-12p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "D12.0V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ rsnd_ak4613: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "rsnd-ak4613";
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4613>;
+ };
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+ };
+
+ vbus0_usb2: regulator-vbus0-usb2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB20_VBUS_CN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ };
+
+ vcc_sdhi1: regulator-vcc-sdhi1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI1 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi1: regulator-vccq-sdhi1 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ x13_clk: x13 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ /*
+ * TX clock internal delay mode is required for reliable
+ * 1Gbps communication using the KSZ9031RNX phy present on
+ * the Ebisu board, however, TX clock internal delay mode
+ * isn't supported on R-Car E3(e). Thus, limit speed to
+ * 100Mbps for reliable communication.
+ */
+ max-speed = <100>;
+ };
+};
+
+&canfd {
+ pinctrl-0 = <&canfd0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ };
+};
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&adv7482_txa>;
+ };
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&x13_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0";
+
+ ports {
+ port@0 {
+ du_out_rgb: endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ };
+};
+
+&ehci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <48000000>;
+};
+
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ io_expander: gpio@20 {
+ compatible = "onnn,pca9654";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ hdmi-encoder@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ video-receiver@70 {
+ compatible = "adi,adv7482";
+ reg = <0x70>;
+
+ interrupt-parent = <&gpio0>;
+ interrupt-names = "intrq1", "intrq2";
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
+ <17 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@7 {
+ reg = <7>;
+
+ adv7482_ain7: endpoint {
+ remote-endpoint = <&cvbs_con>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+
+ adv7482_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_con>;
+ };
+ };
+
+ port@a {
+ reg = <10>;
+
+ adv7482_txa: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 3>;
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+ };
+
+ cs2000: clk-multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
+&i2c_dvfs {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ pmic: pmic@30 {
+ pinctrl-0 = <&irq0_pins>;
+ pinctrl-names = "default";
+
+ compatible = "rohm,bd9571mwv";
+ reg = <0x30>;
+ interrupt-parent = <&intc_ex>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ rohm,ddr-backup-power = <0x1>;
+ rohm,rstbmode-level;
+ };
+
+ eeprom@50 {
+ compatible = "rohm,br24t01", "atmel,24c01";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>,
+ <&x13_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
+&lvds1 {
+ /*
+ * Even though the LVDS1 output is not connected, the encoder must be
+ * enabled to supply a pixel clock to the DU for the DPAD output when
+ * LVDS0 is in use.
+ */
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>,
+ <&x13_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pciec0 {
+ status = "okay";
+};
+
+&pfc {
+ avb_pins: avb {
+ groups = "avb_link", "avb_mii";
+ function = "avb";
+ };
+
+ canfd0_pins: canfd0 {
+ groups = "canfd0_data";
+ function = "canfd0";
+ };
+
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ function = "du";
+ };
+
+ irq0_pins: irq0 {
+ groups = "intc_ex_irq0";
+ function = "intc_ex";
+ };
+
+ keys_pins: keys {
+ pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13";
+ bias-pull-up;
+ };
+
+ pwm3_pins: pwm3 {
+ groups = "pwm3_b";
+ function = "pwm3";
+ };
+
+ pwm5_pins: pwm5 {
+ groups = "pwm5_a";
+ function = "pwm5";
+ };
+
+ rpc_pins: rpc {
+ groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
+ "rpc_int";
+ function = "rpc";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi1_pins: sd1 {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <3300>;
+ };
+
+ sdhi1_pins_uhs: sd1_uhs {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <1800>;
+ };
+
+ sdhi3_pins: sd3 {
+ groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
+ "audio_clkout_a", "audio_clkout1_a";
+ function = "audio_clk";
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
+ function = "ssi";
+ };
+
+ usb0_pins: usb {
+ groups = "usb0_b", "usb0_id";
+ function = "usb0";
+ };
+
+ usb30_pins: usb30 {
+ groups = "usb30";
+ function = "usb30";
+ };
+};
+
+&pwm3 {
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pwm5 {
+ pinctrl-0 = <&pwm5_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <12288000 11289600>;
+
+ status = "okay";
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
+ <&cpg CPG_CORE R8A77990_CLK_ZA2>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0>, <&src0>, <&dvc0>;
+ capture = <&ssi1>, <&src1>, <&dvc1>;
+ };
+ };
+
+};
+
+&rpc {
+ pinctrl-0 = <&rpc_pins>;
+ pinctrl-names = "default";
+
+ /* Left disabled. To be enabled by firmware when unlocked. */
+
+ flash@0 {
+ compatible = "cypress,hyperflash", "cfi-flash";
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ bl2@40000 {
+ reg = <0x00040000 0x140000>;
+ read-only;
+ };
+ cert_header_sa6@180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@1c0000 {
+ reg = <0x001c0000 0x040000>;
+ read-only;
+ };
+ tee@200000 {
+ reg = <0x00200000 0x440000>;
+ read-only;
+ };
+ uboot@640000 {
+ reg = <0x00640000 0x100000>;
+ read-only;
+ };
+ dtb@740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user@1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
+ };
+ };
+ };
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-1 = <&sdhi1_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi1>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdhi3 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-1 = <&sdhi3_pins>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ full-pwr-cycle-in-suspend;
+ status = "okay";
+};
+
+&ssi1 {
+ shared-pin;
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&vbus0_usb2>;
+ status = "okay";
+};
+
+&usb3_peri0 {
+ companion = <&xhci0>;
+ status = "okay";
+};
+
+&vin4 {
+ status = "okay";
+};
+
+&vin5 {
+ status = "okay";
+};
+
+&xhci0 {
+ pinctrl-0 = <&usb30_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/dts/hihope-rev4.dtsi b/arch/arm/dts/hihope-rev4.dtsi
index 30e929997a..7fc0339a3a 100644
--- a/arch/arm/dts/hihope-rev4.dtsi
+++ b/arch/arm/dts/hihope-rev4.dtsi
@@ -3,7 +3,7 @@
* Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
* HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts
*
- * Copyright (C) 2021 Renesas Electronics Corp.
+ * Copyright (C) 2020 Renesas Electronics Corp.
*/
#include <dt-bindings/gpio/gpio.h>
@@ -80,7 +80,7 @@
};
&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
status = "okay";
@@ -91,7 +91,11 @@
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;
- /* update <audio_clk_b> to <cs2000> */
+ /*
+ * Update <audio_clk_b> to <cs2000>
+ * Switch SW2404 should be at position 1 so that clock from
+ * CS2000 is connected to AUDIO_CLKB_A
+ */
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
diff --git a/arch/arm/dts/hihope-rzg2-ex.dtsi b/arch/arm/dts/hihope-rzg2-ex.dtsi
index 7745012d4b..ad898c6db4 100644
--- a/arch/arm/dts/hihope-rzg2-ex.dtsi
+++ b/arch/arm/dts/hihope-rzg2-ex.dtsi
@@ -2,7 +2,7 @@
/*
* Device Tree Source for the RZ/G2[HMN] HiHope sub board common parts
*
- * Copyright (C) 2021 Renesas Electronics Corp.
+ * Copyright (C) 2019 Renesas Electronics Corp.
*/
/ {
@@ -19,10 +19,13 @@
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
- phy-mode = "rgmii-txid";
+ tx-internal-delay-ps = <2000>;
+ rx-internal-delay-ps = <1800>;
status = "okay";
phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id001c.c915",
+ "ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts
index 3cf2e07694..9ae67263c0 100644
--- a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts
+++ b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts
@@ -14,6 +14,14 @@
compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1";
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &iic_pmic;
serial0 = &scif2;
serial1 = &hscif0;
serial2 = &hscif1;
diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
index f0e4a1f25d..a5ca86196a 100644
--- a/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
+++ b/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
@@ -3,7 +3,7 @@
* Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to
* sub board
*
- * Copyright (C) 2021 Renesas Electronics Corp.
+ * Copyright (C) 2020 Renesas Electronics Corp.
*/
#include "r8a774a1-hihope-rzg2m.dts"
diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m.dts b/arch/arm/dts/r8a774a1-hihope-rzg2m.dts
index a574c85a50..25ae255de0 100644
--- a/arch/arm/dts/r8a774a1-hihope-rzg2m.dts
+++ b/arch/arm/dts/r8a774a1-hihope-rzg2m.dts
@@ -2,7 +2,7 @@
/*
* Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board
*
- * Copyright (C) 2021 Renesas Electronics Corp.
+ * Copyright (C) 2020 Renesas Electronics Corp.
*/
/dts-v1/;
diff --git a/arch/arm/dts/r8a774a1.dtsi b/arch/arm/dts/r8a774a1.dtsi
index d64fb8b1b8..7e643243c3 100644
--- a/arch/arm/dts/r8a774a1.dtsi
+++ b/arch/arm/dts/r8a774a1.dtsi
@@ -17,17 +17,6 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c_dvfs;
- };
-
/*
* The external audio clocks are configured as 0 Hz fixed frequency
* clocks by default.
@@ -58,7 +47,7 @@
clock-frequency = <0>;
};
- cluster0_opp: opp_table0 {
+ cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
@@ -76,10 +65,11 @@
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
+ opp-suspend;
};
};
- cluster1_opp: opp_table1 {
+ cluster1_opp: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
@@ -282,6 +272,7 @@
compatible = "renesas,r8a774a1-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -714,7 +705,7 @@
status = "disabled";
};
- i2c_dvfs: i2c@e60b0000 {
+ iic_pmic: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,iic-r8a774a1",
@@ -1127,6 +1118,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
@@ -1176,6 +1168,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A774A1_CLK_CANFD>,
<&can_clk>;
@@ -1696,12 +1689,12 @@
* clkout : #clock-cells = <0>; <&rcar_sound>;
* clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
*/
- compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3";
- reg = <0 0xec500000 0 0x1000>, /* SCU */
- <0 0xec5a0000 0 0x100>, /* ADG */
- <0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x280>, /* SSI */
- <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
+ compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&cpg CPG_MOD 1005>,
@@ -2008,7 +2001,7 @@
dma-names = "rx", "tx";
};
ssiu40: ssiu-32 {
- dmas = <&audma0 0x71>, <&audma1 0x72>;
+ dmas = <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx";
};
ssiu41: ssiu-33 {
@@ -2274,7 +2267,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 314>;
+ clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774A1_CLK_SD0H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 314>;
@@ -2286,7 +2280,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 313>;
+ clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774A1_CLK_SD1H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 313>;
@@ -2298,7 +2293,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 312>;
+ clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774A1_CLK_SD2H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 312>;
@@ -2310,7 +2306,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 311>;
+ clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774A1_CLK_SD3H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 311>;
@@ -2326,7 +2323,6 @@
reg-names = "regs", "dirmap", "wbuf";
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 917>;
- clock-names = "rpc";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 917>;
#address-cells = <1>;
@@ -2573,6 +2569,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -2628,6 +2628,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -2723,8 +2727,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -2761,8 +2763,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -2774,7 +2774,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2789,7 +2789,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2804,7 +2804,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm/dts/r8a774b1-beacon-rzg2n-kit.dts b/arch/arm/dts/r8a774b1-beacon-rzg2n-kit.dts
index 3c0d59def8..89d708346b 100644
--- a/arch/arm/dts/r8a774b1-beacon-rzg2n-kit.dts
+++ b/arch/arm/dts/r8a774b1-beacon-rzg2n-kit.dts
@@ -11,7 +11,7 @@
/ {
model = "Beacon Embedded Works RZ/G2N Development Kit";
- compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1";
+ compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1";
aliases {
serial0 = &scif2;
diff --git a/arch/arm/dts/r8a774b1.dtsi b/arch/arm/dts/r8a774b1.dtsi
index 5b05474dc2..d541b48c7e 100644
--- a/arch/arm/dts/r8a774b1.dtsi
+++ b/arch/arm/dts/r8a774b1.dtsi
@@ -47,7 +47,7 @@
clock-frequency = <0>;
};
- cluster0_opp: opp_table0 {
+ cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
@@ -156,6 +156,7 @@
compatible = "renesas,r8a774b1-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -588,7 +589,7 @@
status = "disabled";
};
- i2c_dvfs: i2c@e60b0000 {
+ iic_pmic: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,iic-r8a774b1",
@@ -1001,6 +1002,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
@@ -1050,6 +1052,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A774B1_CLK_CANFD>,
<&can_clk>;
@@ -1570,7 +1573,7 @@
* clkout : #clock-cells = <0>; <&rcar_sound>;
* clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
*/
- compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3";
+ compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3";
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
@@ -1882,7 +1885,7 @@
dma-names = "rx", "tx";
};
ssiu40: ssiu-32 {
- dmas = <&audma0 0x71>, <&audma1 0x72>;
+ dmas = <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx";
};
ssiu41: ssiu-33 {
@@ -2132,7 +2135,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 314>;
+ clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774B1_CLK_SD0H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 314>;
@@ -2144,7 +2148,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 313>;
+ clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774B1_CLK_SD1H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 313>;
@@ -2156,7 +2161,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 312>;
+ clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774B1_CLK_SD2H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 312>;
@@ -2168,7 +2174,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 311>;
+ clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774B1_CLK_SD3H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 311>;
@@ -2184,7 +2191,6 @@
reg-names = "regs", "dirmap", "wbuf";
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 917>;
- clock-names = "rpc";
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 917>;
#address-cells = <1>;
@@ -2419,6 +2425,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -2474,6 +2484,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -2569,8 +2583,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -2607,8 +2619,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -2620,7 +2630,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2635,7 +2645,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2650,7 +2660,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm/dts/r8a774c0-cat874.dts b/arch/arm/dts/r8a774c0-cat874.dts
index 676fdef9e0..5a6ea08ffd 100644
--- a/arch/arm/dts/r8a774c0-cat874.dts
+++ b/arch/arm/dts/r8a774c0-cat874.dts
@@ -2,7 +2,7 @@
/*
* Device Tree Source for the Silicon Linux RZ/G2E 96board platform (CAT874)
*
- * Copyright (C) 2021 Renesas Electronics Corp.
+ * Copyright (C) 2019 Renesas Electronics Corp.
*/
/dts-v1/;
@@ -17,6 +17,8 @@
aliases {
serial0 = &scif2;
serial1 = &hscif2;
+ mmc0 = &sdhi0;
+ mmc1 = &sdhi3;
};
chosen {
@@ -170,7 +172,7 @@
ports {
port@0 {
- endpoint {
+ du_out_rgb: endpoint {
remote-endpoint = <&tda19988_in>;
};
};
@@ -351,7 +353,7 @@
};
&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
@@ -365,7 +367,7 @@
rcar_sound,dai {
dai0 {
- playback = <&ssi0 &src0 &dvc0>;
+ playback = <&ssi0>, <&src0>, <&dvc0>;
};
};
};
diff --git a/arch/arm/dts/r8a774c0-ek874.dts b/arch/arm/dts/r8a774c0-ek874.dts
index d3ab28ba31..e7b6619ab2 100644
--- a/arch/arm/dts/r8a774c0-ek874.dts
+++ b/arch/arm/dts/r8a774c0-ek874.dts
@@ -2,7 +2,7 @@
/*
* Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874)
*
- * Copyright (C) 2021 Renesas Electronics Corp.
+ * Copyright (C) 2019 Renesas Electronics Corp.
*/
#include "r8a774c0-cat874.dts"
diff --git a/arch/arm/dts/r8a774c0-u-boot.dtsi b/arch/arm/dts/r8a774c0-u-boot.dtsi
index d29610676c..4572c22f6c 100644
--- a/arch/arm/dts/r8a774c0-u-boot.dtsi
+++ b/arch/arm/dts/r8a774c0-u-boot.dtsi
@@ -35,7 +35,6 @@
/delete-node/ &rcar_sound;
/delete-node/ &audma0;
/delete-node/ &sdhi1;
-/delete-node/ &sdhi3;
/delete-node/ &vspb0;
/delete-node/ &vspd0;
/delete-node/ &vspd1;
diff --git a/arch/arm/dts/r8a774c0.dtsi b/arch/arm/dts/r8a774c0.dtsi
index 2bdd571bd8..151e32ac03 100644
--- a/arch/arm/dts/r8a774c0.dtsi
+++ b/arch/arm/dts/r8a774c0.dtsi
@@ -2,7 +2,7 @@
/*
* Device Tree Source for the RZ/G2E (R8A774C0) SoC
*
- * Copyright (C) 2020 Renesas Electronics Corp.
+ * Copyright (C) 2018-2019 Renesas Electronics Corp.
*/
#include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
@@ -44,7 +44,7 @@
clock-frequency = <0>;
};
- cluster1_opp: opp_table10 {
+ cluster1_opp: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
opp-800000000 {
@@ -145,6 +145,7 @@
compatible = "renesas,r8a774c0-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -574,11 +575,13 @@
status = "disabled";
};
- i2c_dvfs: i2c@e60b0000 {
+ iic_pmic: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a774c0";
- reg = <0 0xe60b0000 0 0x15>;
+ compatible = "renesas,iic-r8a774c0",
+ "renesas,rcar-gen3-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 926>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -957,6 +960,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
@@ -1005,6 +1009,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A774C0_CLK_CANFD>,
<&can_clk>;
@@ -1276,7 +1281,7 @@
vin4csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin4>;
+ remote-endpoint = <&csi40vin4>;
};
};
};
@@ -1304,7 +1309,7 @@
vin5csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin5>;
+ remote-endpoint = <&csi40vin5>;
};
};
};
@@ -1325,11 +1330,11 @@
*/
compatible = "renesas,rcar_sound-r8a774c0",
"renesas,rcar_sound-gen3";
- reg = <0 0xec500000 0 0x1000>, /* SCU */
- <0 0xec5a0000 0 0x100>, /* ADG */
- <0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x280>, /* SSI */
- <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&cpg CPG_MOD 1005>,
@@ -1623,7 +1628,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 314>;
+ clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774C0_CLK_SD0H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 314>;
@@ -1635,7 +1641,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 313>;
+ clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774C0_CLK_SD1H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 313>;
@@ -1647,13 +1654,30 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 311>;
+ clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774C0_CLK_SD3H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 311>;
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a774c0-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x4000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1806,6 +1830,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -1843,8 +1871,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
@@ -1886,8 +1912,6 @@
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -1913,8 +1937,6 @@
port@1 {
reg = <1>;
- lvds1_out: endpoint {
- };
};
};
};
@@ -1929,7 +1951,7 @@
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
- thermal-sensors = <&thermal 0>;
+ thermal-sensors = <&thermal>;
sustainable-power = <717>;
cooling-maps {
diff --git a/arch/arm/dts/r8a774e1-beacon-rzg2h-kit.dts b/arch/arm/dts/r8a774e1-beacon-rzg2h-kit.dts
index 7b6649a3de..3e9ced3b2d 100644
--- a/arch/arm/dts/r8a774e1-beacon-rzg2h-kit.dts
+++ b/arch/arm/dts/r8a774e1-beacon-rzg2h-kit.dts
@@ -11,7 +11,7 @@
/ {
model = "Beacon Embedded Works RZ/G2H Development Kit";
- compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1";
+ compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1";
aliases {
serial0 = &scif2;
diff --git a/arch/arm/dts/r8a774e1.dtsi b/arch/arm/dts/r8a774e1.dtsi
index 8eb006cbd9..c5a0e7866b 100644
--- a/arch/arm/dts/r8a774e1.dtsi
+++ b/arch/arm/dts/r8a774e1.dtsi
@@ -47,7 +47,7 @@
clock-frequency = <0>;
};
- cluster0_opp: opp_table0 {
+ cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
@@ -69,7 +69,7 @@
};
};
- cluster1_opp: opp_table1 {
+ cluster1_opp: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
@@ -769,7 +769,7 @@
status = "disabled";
};
- i2c_dvfs: i2c@e60b0000 {
+ iic_pmic: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,iic-r8a774e1",
@@ -1230,6 +1230,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
@@ -1279,6 +1280,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A774E1_CLK_CANFD>,
<&can_clk>;
@@ -1783,7 +1785,7 @@
* clkout : #clock-cells = <0>; <&rcar_sound>;
* clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
*/
- compatible = "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3";
+ compatible = "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3";
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
@@ -2042,7 +2044,7 @@
dma-names = "rx", "tx";
};
ssiu40: ssiu-32 {
- dmas = <&audma0 0x71>, <&audma1 0x72>;
+ dmas = <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx";
};
ssiu41: ssiu-33 {
@@ -2361,7 +2363,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 314>;
+ clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774E1_CLK_SD0H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 314>;
@@ -2374,7 +2377,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 313>;
+ clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774E1_CLK_SD1H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 313>;
@@ -2387,7 +2391,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 312>;
+ clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774E1_CLK_SD2H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 312>;
@@ -2400,7 +2405,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 311>;
+ clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774E1_CLK_SD3H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 311>;
@@ -2417,7 +2423,6 @@
reg-names = "regs", "dirmap", "wbuf";
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 917>;
- clock-names = "rpc";
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 917>;
#address-cells = <1>;
@@ -2709,6 +2714,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -2764,6 +2773,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -2844,8 +2857,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -2882,8 +2893,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -2895,7 +2904,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2910,7 +2919,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2925,7 +2934,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm/dts/r8a7790-lager.dts b/arch/arm/dts/r8a7790-lager.dts
index 097fd9317c..5ad5349a50 100644
--- a/arch/arm/dts/r8a7790-lager.dts
+++ b/arch/arm/dts/r8a7790-lager.dts
@@ -53,6 +53,9 @@
i2c11 = &i2cexio1;
i2c12 = &i2chdmi;
i2c13 = &i2cpwr;
+ mmc0 = &mmcif1;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi2;
};
chosen {
@@ -78,6 +81,9 @@
keyboard {
compatible = "gpio-keys";
+ pinctrl-0 = <&keyboard_pins>;
+ pinctrl-names = "default";
+
one {
linux,code = <KEY_1>;
label = "SW2-1";
@@ -343,7 +349,6 @@
composite-in@20 {
compatible = "adi,adv7180";
reg = <0x20>;
- remote = <&vin1>;
port {
adv7180: endpoint {
@@ -364,8 +369,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
ports {
#address-cells = <1>;
@@ -439,7 +442,7 @@
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
@@ -659,10 +662,15 @@
groups = "audio_clk_a";
function = "audio_clk";
};
+
+ keyboard_pins: keyboard {
+ pins = "GP_1_14", "GP_1_24", "GP_1_26", "GP_1_28";
+ bias-pull-up;
+ };
};
&ether {
- pinctrl-0 = <&ether_pins &phy1_pins>;
+ pinctrl-0 = <&ether_pins>, <&phy1_pins>;
pinctrl-names = "default";
phy-handle = <&phy1>;
@@ -670,10 +678,13 @@
status = "okay";
phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0022.1537",
+ "ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
+ reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
};
};
@@ -910,7 +921,7 @@
};
&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
@@ -920,8 +931,8 @@
rcar_sound,dai {
dai0 {
- playback = <&ssi0 &src2 &dvc0>;
- capture = <&ssi1 &src3 &dvc1>;
+ playback = <&ssi0>, <&src2>, <&dvc0>;
+ capture = <&ssi1>, <&src3>, <&dvc1>;
};
};
};
diff --git a/arch/arm/dts/r8a7790-stout.dts b/arch/arm/dts/r8a7790-stout.dts
index a315ba749a..fe14727eef 100644
--- a/arch/arm/dts/r8a7790-stout.dts
+++ b/arch/arm/dts/r8a7790-stout.dts
@@ -191,7 +191,7 @@
};
&ether {
- pinctrl-0 = <&ether_pins &phy1_pins>;
+ pinctrl-0 = <&ether_pins>, <&phy1_pins>;
pinctrl-names = "default";
phy-handle = <&phy1>;
@@ -199,10 +199,13 @@
status = "okay";
phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0022.1537",
+ "ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
+ reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
};
};
@@ -296,8 +299,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
ports {
#address-cells = <1>;
@@ -322,7 +323,7 @@
&iic3 {
pinctrl-names = "default";
- pinctrl-0 = <&iic3_pins &pmic_irq_pins>;
+ pinctrl-0 = <&iic3_pins>, <&pmic_irq_pins>;
status = "okay";
pmic@58 {
@@ -340,7 +341,7 @@
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
diff --git a/arch/arm/dts/r8a7790.dtsi b/arch/arm/dts/r8a7790.dtsi
index 334ba19769..db171e3c62 100644
--- a/arch/arm/dts/r8a7790.dtsi
+++ b/arch/arm/dts/r8a7790.dtsi
@@ -69,7 +69,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -78,6 +77,7 @@
clock-frequency = <1300000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
voltage-tolerance = <1>; /* 1% */
@@ -99,6 +99,7 @@
clock-frequency = <1300000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
voltage-tolerance = <1>; /* 1% */
@@ -120,6 +121,7 @@
clock-frequency = <1300000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
voltage-tolerance = <1>; /* 1% */
@@ -141,6 +143,7 @@
clock-frequency = <1300000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
voltage-tolerance = <1>; /* 1% */
@@ -162,6 +165,7 @@
clock-frequency = <780000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
capacity-dmips-mhz = <539>;
};
@@ -173,6 +177,7 @@
clock-frequency = <780000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
capacity-dmips-mhz = <539>;
};
@@ -184,6 +189,7 @@
clock-frequency = <780000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
capacity-dmips-mhz = <539>;
};
@@ -195,6 +201,7 @@
clock-frequency = <780000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
capacity-dmips-mhz = <539>;
};
@@ -267,6 +274,7 @@
compatible = "renesas,r8a7790-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -363,7 +371,7 @@
resets = <&cpg 907>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7790";
reg = <0 0xe6060000 0 0x250>;
};
@@ -381,13 +389,13 @@
apmu@e6151000 {
compatible = "renesas,r8a7790-apmu", "renesas,apmu";
reg = <0 0xe6151000 0 0x188>;
- cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+ cpus = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
};
apmu@e6152000 {
compatible = "renesas,r8a7790-apmu", "renesas,apmu";
reg = <0 0xe6152000 0 0x188>;
- cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+ cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
rst: reset-controller@e6160000 {
@@ -427,7 +435,7 @@
#thermal-sensor-cells = <0>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7790",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -437,7 +445,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7790",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -446,7 +454,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7790",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -456,7 +464,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7790",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -465,7 +473,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7790",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -475,7 +483,7 @@
status = "disabled";
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a7790",
"renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
@@ -646,7 +654,7 @@
status = "disabled";
};
- usbphy: usb-phy@e6590100 {
+ usbphy: usb-phy-controller@e6590100 {
compatible = "renesas,usb-phy-r8a7790",
"renesas,rcar-gen2-usb-phy";
reg = <0 0xe6590100 0 0x100>;
@@ -658,11 +666,11 @@
resets = <&cpg 704>;
status = "disabled";
- usb0: usb-channel@0 {
+ usb0: usb-phy@0 {
reg = <0>;
#phy-cells = <1>;
};
- usb2: usb-channel@2 {
+ usb2: usb-phy@2 {
reg = <2>;
#phy-cells = <1>;
};
@@ -768,6 +776,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
@@ -1467,7 +1476,7 @@
};
};
- sdhi0: sd@ee100000 {
+ sdhi0: mmc@ee100000 {
compatible = "renesas,sdhi-r8a7790",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee100000 0 0x328>;
@@ -1482,7 +1491,7 @@
status = "disabled";
};
- sdhi1: sd@ee120000 {
+ sdhi1: mmc@ee120000 {
compatible = "renesas,sdhi-r8a7790",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee120000 0 0x328>;
@@ -1497,7 +1506,7 @@
status = "disabled";
};
- sdhi2: sd@ee140000 {
+ sdhi2: mmc@ee140000 {
compatible = "renesas,sdhi-r8a7790",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee140000 0 0x100>;
@@ -1512,7 +1521,7 @@
status = "disabled";
};
- sdhi3: sd@ee160000 {
+ sdhi3: mmc@ee160000 {
compatible = "renesas,sdhi-r8a7790",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee160000 0 0x100>;
@@ -1719,6 +1728,8 @@
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>;
clock-names = "du.0", "du.1", "du.2";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
status = "disabled";
ports {
diff --git a/arch/arm/dts/r8a7791-koelsch.dts b/arch/arm/dts/r8a7791-koelsch.dts
index 2b096d5e06..26a40782cc 100644
--- a/arch/arm/dts/r8a7791-koelsch.dts
+++ b/arch/arm/dts/r8a7791-koelsch.dts
@@ -53,6 +53,9 @@
i2c12 = &i2cexio1;
i2c13 = &i2chdmi;
i2c14 = &i2cexio4;
+ mmc0 = &sdhi0;
+ mmc1 = &sdhi1;
+ mmc2 = &sdhi2;
};
chosen {
@@ -78,6 +81,9 @@
keyboard {
compatible = "gpio-keys";
+ pinctrl-0 = <&keyboard_pins>;
+ pinctrl-names = "default";
+
key-1 {
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
@@ -366,7 +372,6 @@
composite-in@20 {
compatible = "adi,adv7180";
reg = <0x20>;
- remote = <&vin1>;
port {
adv7180: endpoint {
@@ -387,8 +392,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
ports {
#address-cells = <1>;
@@ -618,10 +621,15 @@
groups = "audio_clk_a";
function = "audio_clk";
};
+
+ keyboard_pins: keyboard {
+ pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
+ bias-pull-up;
+ };
};
&ether {
- pinctrl-0 = <&ether_pins &phy1_pins>;
+ pinctrl-0 = <&ether_pins>, <&phy1_pins>;
pinctrl-names = "default";
phy-handle = <&phy1>;
@@ -629,10 +637,13 @@
status = "okay";
phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0022.1537",
+ "ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
+ reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
};
};
@@ -794,7 +805,7 @@
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
@@ -880,7 +891,7 @@
};
&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
@@ -890,8 +901,8 @@
rcar_sound,dai {
dai0 {
- playback = <&ssi0 &src2 &dvc0>;
- capture = <&ssi1 &src3 &dvc1>;
+ playback = <&ssi0>, <&src2>, <&dvc0>;
+ capture = <&ssi1>, <&src3>, <&dvc1>;
};
};
};
diff --git a/arch/arm/dts/r8a7791-porter.dts b/arch/arm/dts/r8a7791-porter.dts
index f9ece7ab20..ec0a20d513 100644
--- a/arch/arm/dts/r8a7791-porter.dts
+++ b/arch/arm/dts/r8a7791-porter.dts
@@ -28,6 +28,8 @@
serial0 = &scif0;
i2c9 = &gpioi2c2;
i2c10 = &i2chdmi;
+ mmc0 = &sdhi0;
+ mmc1 = &sdhi2;
};
chosen {
@@ -162,7 +164,6 @@
composite-in@20 {
compatible = "adi,adv7180";
reg = <0x20>;
- remote = <&vin0>;
port {
adv7180: endpoint {
@@ -181,8 +182,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
ports {
#address-cells = <1>;
@@ -295,7 +294,7 @@
};
&ether {
- pinctrl-0 = <&ether_pins &phy1_pins>;
+ pinctrl-0 = <&ether_pins>, <&phy1_pins>;
pinctrl-names = "default";
phy-handle = <&phy1>;
@@ -303,10 +302,13 @@
status = "okay";
phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0022.1537",
+ "ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
+ reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
};
};
@@ -388,7 +390,7 @@
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
@@ -496,7 +498,7 @@
};
&rcar_sound {
- pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+ pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
pinctrl-names = "default";
status = "okay";
diff --git a/arch/arm/dts/r8a7791.dtsi b/arch/arm/dts/r8a7791.dtsi
index 59a55e87fc..d8f91d9f42 100644
--- a/arch/arm/dts/r8a7791.dtsi
+++ b/arch/arm/dts/r8a7791.dtsi
@@ -68,7 +68,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -77,6 +76,7 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
voltage-tolerance = <1>; /* 1% */
clock-latency = <300000>; /* 300 us */
@@ -97,6 +97,7 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
voltage-tolerance = <1>; /* 1% */
clock-latency = <300000>; /* 300 us */
@@ -160,6 +161,7 @@
compatible = "renesas,r8a7791-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -286,11 +288,22 @@
resets = <&cpg 904>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7791";
reg = <0 0xe6060000 0 0x250>;
};
+ tpu: pwm@e60f0000 {
+ compatible = "renesas,tpu-r8a7791", "renesas,tpu";
+ reg = <0 0xe60f0000 0 0x148>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a7791-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -304,7 +317,7 @@
apmu@e6152000 {
compatible = "renesas,r8a7791-apmu", "renesas,apmu";
reg = <0 0xe6152000 0 0x188>;
- cpus = <&cpu0 &cpu1>;
+ cpus = <&cpu0>, <&cpu1>;
};
rst: reset-controller@e6160000 {
@@ -350,7 +363,7 @@
#thermal-sensor-cells = <0>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -360,7 +373,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -369,7 +382,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -379,7 +392,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -388,7 +401,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -398,7 +411,7 @@
status = "disabled";
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
@@ -407,7 +420,7 @@
status = "disabled";
};
- ipmmu_gp: mmu@e62a0000 {
+ ipmmu_gp: iommu@e62a0000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
@@ -595,7 +608,7 @@
status = "disabled";
};
- usbphy: usb-phy@e6590100 {
+ usbphy: usb-phy-controller@e6590100 {
compatible = "renesas,usb-phy-r8a7791",
"renesas,rcar-gen2-usb-phy";
reg = <0 0xe6590100 0 0x100>;
@@ -607,11 +620,11 @@
resets = <&cpg 704>;
status = "disabled";
- usb0: usb-channel@0 {
+ usb0: usb-phy@0 {
reg = <0>;
#phy-cells = <1>;
};
- usb2: usb-channel@2 {
+ usb2: usb-phy@2 {
reg = <2>;
#phy-cells = <1>;
};
@@ -717,6 +730,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
@@ -1067,6 +1081,76 @@
status = "disabled";
};
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
adc: adc@e6e54000 {
compatible = "renesas,r8a7791-gyroadc",
"renesas,rcar-gyroadc";
@@ -1482,7 +1566,7 @@
};
};
- sdhi0: sd@ee100000 {
+ sdhi0: mmc@ee100000 {
compatible = "renesas,sdhi-r8a7791",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee100000 0 0x328>;
@@ -1497,7 +1581,7 @@
status = "disabled";
};
- sdhi1: sd@ee140000 {
+ sdhi1: mmc@ee140000 {
compatible = "renesas,sdhi-r8a7791",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee140000 0 0x100>;
@@ -1512,7 +1596,7 @@
status = "disabled";
};
- sdhi2: sd@ee160000 {
+ sdhi2: mmc@ee160000 {
compatible = "renesas,sdhi-r8a7791",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee160000 0 0x100>;
@@ -1681,9 +1765,10 @@
reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
status = "disabled";
ports {
diff --git a/arch/arm/dts/r8a7792-blanche.dts b/arch/arm/dts/r8a7792-blanche.dts
index 248eb717eb..c66de9dd12 100644
--- a/arch/arm/dts/r8a7792-blanche.dts
+++ b/arch/arm/dts/r8a7792-blanche.dts
@@ -112,6 +112,9 @@
keyboard {
compatible = "gpio-keys";
+ pinctrl-0 = <&keyboard_pins>;
+ pinctrl-names = "default";
+
key-1 {
linux,code = <KEY_1>;
label = "SW2-1";
@@ -235,6 +238,11 @@
function = "du1";
};
+ keyboard_pins: keyboard {
+ pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_02";
+ bias-pull-up;
+ };
+
pmic_irq_pins: pmicirq {
groups = "intc_irq2";
function = "intc";
@@ -289,8 +297,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
ports {
#address-cells = <1>;
@@ -329,14 +335,14 @@
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
};
&du {
- pinctrl-0 = <&du0_pins &du1_pins>;
+ pinctrl-0 = <&du0_pins>, <&du1_pins>;
pinctrl-names = "default";
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
diff --git a/arch/arm/dts/r8a7792.dtsi b/arch/arm/dts/r8a7792.dtsi
index 39af16caa2..a6d9367f8f 100644
--- a/arch/arm/dts/r8a7792.dtsi
+++ b/arch/arm/dts/r8a7792.dtsi
@@ -45,7 +45,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -54,6 +53,7 @@
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
};
@@ -64,6 +64,7 @@
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
};
@@ -110,6 +111,7 @@
compatible = "renesas,r8a7792-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -296,7 +298,7 @@
resets = <&cpg 913>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7792";
reg = <0 0xe6060000 0 0x144>;
};
@@ -314,7 +316,7 @@
apmu@e6152000 {
compatible = "renesas,r8a7792-apmu", "renesas,apmu";
reg = <0 0xe6152000 0 0x188>;
- cpus = <&cpu0 &cpu1>;
+ cpus = <&cpu0>, <&cpu1>;
};
rst: reset-controller@e6160000 {
@@ -537,6 +539,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
@@ -780,7 +783,7 @@
status = "disabled";
};
- sdhi0: sd@ee100000 {
+ sdhi0: mmc@ee100000 {
compatible = "renesas,sdhi-r8a7792",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee100000 0 0x328>;
@@ -852,9 +855,10 @@
reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
status = "disabled";
ports {
diff --git a/arch/arm/dts/r8a7793-gose.dts b/arch/arm/dts/r8a7793-gose.dts
index 22ca7cd1e7..79b537b246 100644
--- a/arch/arm/dts/r8a7793-gose.dts
+++ b/arch/arm/dts/r8a7793-gose.dts
@@ -49,6 +49,9 @@
i2c10 = &gpioi2c4;
i2c11 = &i2chdmi;
i2c12 = &i2cexio4;
+ mmc0 = &sdhi0;
+ mmc1 = &sdhi1;
+ mmc2 = &sdhi2;
};
chosen {
@@ -61,9 +64,12 @@
reg = <0 0x40000000 0 0x40000000>;
};
- gpio-keys {
+ keyboard {
compatible = "gpio-keys";
+ pinctrl-0 = <&keyboard_pins>;
+ pinctrl-names = "default";
+
key-1 {
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
@@ -334,9 +340,8 @@
composite-in@20 {
compatible = "adi,adv7180cp";
reg = <0x20>;
- remote = <&vin1>;
- port {
+ ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -366,8 +371,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
ports {
#address-cells = <1>;
@@ -396,7 +399,7 @@
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
default-input = <0>;
- port {
+ ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -567,6 +570,11 @@
function = "audio_clk";
};
+ keyboard_pins: keyboard {
+ pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
+ bias-pull-up;
+ };
+
vin0_pins: vin0 {
groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
function = "vin0";
@@ -579,7 +587,7 @@
};
&ether {
- pinctrl-0 = <&ether_pins &phy1_pins>;
+ pinctrl-0 = <&ether_pins>, <&phy1_pins>;
pinctrl-names = "default";
phy-handle = <&phy1>;
@@ -587,10 +595,13 @@
status = "okay";
phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0022.1537",
+ "ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
+ reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
};
};
@@ -729,7 +740,7 @@
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
@@ -753,7 +764,7 @@
};
&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
@@ -763,8 +774,8 @@
rcar_sound,dai {
dai0 {
- playback = <&ssi0 &src2 &dvc0>;
- capture = <&ssi1 &src3 &dvc1>;
+ playback = <&ssi0>, <&src2>, <&dvc0>;
+ capture = <&ssi1>, <&src3>, <&dvc1>;
};
};
};
diff --git a/arch/arm/dts/r8a7793.dtsi b/arch/arm/dts/r8a7793.dtsi
index eef035c4d9..9ebe7bfaf0 100644
--- a/arch/arm/dts/r8a7793.dtsi
+++ b/arch/arm/dts/r8a7793.dtsi
@@ -60,7 +60,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -69,6 +68,7 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
voltage-tolerance = <1>; /* 1% */
clock-latency = <300000>; /* 300 us */
@@ -89,6 +89,7 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
voltage-tolerance = <1>; /* 1% */
clock-latency = <300000>; /* 300 us */
@@ -145,6 +146,7 @@
compatible = "renesas,r8a7793-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -271,7 +273,7 @@
resets = <&cpg 904>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7793";
reg = <0 0xe6060000 0 0x250>;
};
@@ -290,7 +292,7 @@
apmu@e6152000 {
compatible = "renesas,r8a7793-apmu", "renesas,apmu";
reg = <0 0xe6152000 0 0x188>;
- cpus = <&cpu0 &cpu1>;
+ cpus = <&cpu0>, <&cpu1>;
};
rst: reset-controller@e6160000 {
@@ -336,7 +338,7 @@
#thermal-sensor-cells = <0>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -346,7 +348,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -355,7 +357,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -365,7 +367,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -374,7 +376,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -384,7 +386,7 @@
status = "disabled";
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
@@ -393,7 +395,7 @@
status = "disabled";
};
- ipmmu_gp: mmu@e62a0000 {
+ ipmmu_gp: iommu@e62a0000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
@@ -1227,7 +1229,7 @@
dma-channels = <13>;
};
- sdhi0: sd@ee100000 {
+ sdhi0: mmc@ee100000 {
compatible = "renesas,sdhi-r8a7793",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee100000 0 0x328>;
@@ -1242,7 +1244,7 @@
status = "disabled";
};
- sdhi1: sd@ee140000 {
+ sdhi1: mmc@ee140000 {
compatible = "renesas,sdhi-r8a7793",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee140000 0 0x100>;
@@ -1257,7 +1259,7 @@
status = "disabled";
};
- sdhi2: sd@ee160000 {
+ sdhi2: mmc@ee160000 {
compatible = "renesas,sdhi-r8a7793",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee160000 0 0x100>;
@@ -1341,9 +1343,10 @@
reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
status = "disabled";
ports {
diff --git a/arch/arm/dts/r8a7794-alt.dts b/arch/arm/dts/r8a7794-alt.dts
index f79fce74cd..4d93319674 100644
--- a/arch/arm/dts/r8a7794-alt.dts
+++ b/arch/arm/dts/r8a7794-alt.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "r8a7794.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Alt";
@@ -19,6 +20,9 @@
i2c10 = &gpioi2c4;
i2c11 = &i2chdmi;
i2c12 = &i2cexio4;
+ mmc0 = &mmcif0;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi1;
};
chosen {
@@ -91,6 +95,42 @@
#size-cells = <1>;
};
+ keyboard {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keyboard_pins>;
+ pinctrl-names = "default";
+
+ one {
+ linux,code = <KEY_1>;
+ label = "SW2-1";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+ };
+ two {
+ linux,code = <KEY_2>;
+ label = "SW2-2";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+ };
+ three {
+ linux,code = <KEY_3>;
+ label = "SW2-3";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+ };
+ four {
+ linux,code = <KEY_4>;
+ label = "SW2-4";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
vga-encoder {
compatible = "adi,adv7123";
@@ -167,7 +207,6 @@
composite-in@20 {
compatible = "adi,adv7180";
reg = <0x20>;
- remote = <&vin0>;
port {
adv7180: endpoint {
@@ -317,6 +356,11 @@
groups = "usb1";
function = "usb1";
};
+
+ keyboard_pins: keyboard {
+ pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
+ bias-pull-up;
+ };
};
&cmt0 {
@@ -331,7 +375,7 @@
};
&ether {
- pinctrl-0 = <&ether_pins &phy1_pins>;
+ pinctrl-0 = <&ether_pins>, <&phy1_pins>;
pinctrl-names = "default";
phy-handle = <&phy1>;
@@ -339,10 +383,13 @@
status = "okay";
phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0022.1537",
+ "ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
+ reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
};
};
@@ -416,7 +463,7 @@
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
diff --git a/arch/arm/dts/r8a7794-silk.dts b/arch/arm/dts/r8a7794-silk.dts
index 2c16ad8543..b7af1befa1 100644
--- a/arch/arm/dts/r8a7794-silk.dts
+++ b/arch/arm/dts/r8a7794-silk.dts
@@ -31,6 +31,8 @@
serial0 = &scif2;
i2c9 = &gpioi2c1;
i2c10 = &i2chdmi;
+ mmc0 = &mmcif0;
+ mmc1 = &sdhi1;
};
chosen {
@@ -43,9 +45,12 @@
reg = <0 0x40000000 0 0x40000000>;
};
- gpio-keys {
+ keyboard {
compatible = "gpio-keys";
+ pinctrl-0 = <&keyboard_pins>;
+ pinctrl-names = "default";
+
key-3 {
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
@@ -236,7 +241,6 @@
composite-in@20 {
compatible = "adi,adv7180";
reg = <0x20>;
- remote = <&vin0>;
port {
adv7180: endpoint {
@@ -255,8 +259,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
ports {
#address-cells = <1>;
@@ -359,6 +361,11 @@
function = "du1";
};
+ keyboard_pins: keyboard {
+ pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
+ bias-pull-up;
+ };
+
ssi_pins: sound {
groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
function = "ssi";
@@ -382,7 +389,7 @@
};
&ether {
- pinctrl-0 = <&ether_pins &phy1_pins>;
+ pinctrl-0 = <&ether_pins>, <&phy1_pins>;
pinctrl-names = "default";
phy-handle = <&phy1>;
@@ -390,10 +397,13 @@
status = "okay";
phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0022.1537",
+ "ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
+ reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
};
};
@@ -423,7 +433,7 @@
compatible = "dlg,da9063-rtc";
};
- wdt {
+ watchdog {
compatible = "dlg,da9063-watchdog";
};
};
@@ -520,7 +530,7 @@
};
&du {
- pinctrl-0 = <&du0_pins &du1_pins>;
+ pinctrl-0 = <&du0_pins>, <&du1_pins>;
pinctrl-names = "default";
status = "okay";
@@ -543,7 +553,7 @@
};
&rcar_sound {
- pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+ pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
pinctrl-names = "default";
status = "okay";
diff --git a/arch/arm/dts/r8a7794.dtsi b/arch/arm/dts/r8a7794.dtsi
index 05ef79c6ed..7aa781ff3b 100644
--- a/arch/arm/dts/r8a7794.dtsi
+++ b/arch/arm/dts/r8a7794.dtsi
@@ -62,7 +62,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -71,6 +70,7 @@
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
};
@@ -81,6 +81,7 @@
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
};
@@ -127,6 +128,7 @@
compatible = "renesas,r8a7794-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -238,7 +240,7 @@
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7794";
reg = <0 0xe6060000 0 0x11c>;
};
@@ -256,7 +258,7 @@
apmu@e6151000 {
compatible = "renesas,r8a7794-apmu", "renesas,apmu";
reg = <0 0xe6151000 0 0x188>;
- cpus = <&cpu0 &cpu1>;
+ cpus = <&cpu0>, <&cpu1>;
};
rst: reset-controller@e6160000 {
@@ -290,7 +292,7 @@
resets = <&cpg 407>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -300,7 +302,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -309,7 +311,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -319,7 +321,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -328,7 +330,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -338,7 +340,7 @@
status = "disabled";
};
- ipmmu_gp: mmu@e62a0000 {
+ ipmmu_gp: iommu@e62a0000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
@@ -504,7 +506,7 @@
status = "disabled";
};
- usbphy: usb-phy@e6590100 {
+ usbphy: usb-phy-controller@e6590100 {
compatible = "renesas,usb-phy-r8a7794",
"renesas,rcar-gen2-usb-phy";
reg = <0 0xe6590100 0 0x100>;
@@ -516,11 +518,11 @@
resets = <&cpg 704>;
status = "disabled";
- usb0: usb-channel@0 {
+ usb0: usb-phy@0 {
reg = <0>;
#phy-cells = <1>;
};
- usb2: usb-channel@2 {
+ usb2: usb-phy@2 {
reg = <2>;
#phy-cells = <1>;
};
@@ -598,6 +600,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
@@ -1232,7 +1235,7 @@
};
};
- sdhi0: sd@ee100000 {
+ sdhi0: mmc@ee100000 {
compatible = "renesas,sdhi-r8a7794",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee100000 0 0x328>;
@@ -1247,7 +1250,7 @@
status = "disabled";
};
- sdhi1: sd@ee140000 {
+ sdhi1: mmc@ee140000 {
compatible = "renesas,sdhi-r8a7794",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee140000 0 0x100>;
@@ -1262,7 +1265,7 @@
status = "disabled";
};
- sdhi2: sd@ee160000 {
+ sdhi2: mmc@ee160000 {
compatible = "renesas,sdhi-r8a7794",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee160000 0 0x100>;
@@ -1356,6 +1359,8 @@
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
status = "disabled";
ports {
diff --git a/arch/arm/dts/r8a77950-salvator-x.dts b/arch/arm/dts/r8a77950-salvator-x.dts
index 2438825c9b..c6ca61a8ed 100644
--- a/arch/arm/dts/r8a77950-salvator-x.dts
+++ b/arch/arm/dts/r8a77950-salvator-x.dts
@@ -47,111 +47,3 @@
clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
-
-&ehci2 {
- status = "okay";
-};
-
-&hdmi0 {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
- rcar_dw_hdmi0_out: endpoint {
- remote-endpoint = <&hdmi0_con>;
- };
- };
- port@2 {
- reg = <2>;
- dw_hdmi0_snd_in: endpoint {
- remote-endpoint = <&rsnd_endpoint1>;
- };
- };
- };
-};
-
-&hdmi0_con {
- remote-endpoint = <&rcar_dw_hdmi0_out>;
-};
-
-&hdmi1 {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
- rcar_dw_hdmi1_out: endpoint {
- remote-endpoint = <&hdmi1_con>;
- };
- };
- port@2 {
- reg = <2>;
- dw_hdmi1_snd_in: endpoint {
- remote-endpoint = <&rsnd_endpoint2>;
- };
- };
- };
-};
-
-&hdmi1_con {
- remote-endpoint = <&rcar_dw_hdmi1_out>;
-};
-
-&ohci2 {
- status = "okay";
-};
-
-&pfc {
- usb2_pins: usb2 {
- groups = "usb2";
- function = "usb2";
- };
-};
-
-&rcar_sound {
- ports {
- /* rsnd_port0 is on salvator-common */
- rsnd_port1: port@1 {
- reg = <1>;
- rsnd_endpoint1: endpoint {
- remote-endpoint = <&dw_hdmi0_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint1>;
- frame-master = <&rsnd_endpoint1>;
-
- playback = <&ssi2>;
- };
- };
- rsnd_port2: port@2 {
- reg = <2>;
- rsnd_endpoint2: endpoint {
- remote-endpoint = <&dw_hdmi1_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint2>;
- frame-master = <&rsnd_endpoint2>;
-
- playback = <&ssi3>;
- };
- };
- };
-};
-
-&sata {
- status = "okay";
-};
-
-&sound_card {
- dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1 /* HDMI0 */
- &rsnd_port2>; /* HDMI1 */
-};
-
-&usb2_phy2 {
- pinctrl-0 = <&usb2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
diff --git a/arch/arm/dts/r8a77950-ulcb.dts b/arch/arm/dts/r8a77950-ulcb.dts
index 38a6d6a108..5340579931 100644
--- a/arch/arm/dts/r8a77950-ulcb.dts
+++ b/arch/arm/dts/r8a77950-ulcb.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES1.x
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2016 Cogent Embedded, Inc.
diff --git a/arch/arm/dts/r8a77950.dtsi b/arch/arm/dts/r8a77950.dtsi
index 15216495e1..57eb88177e 100644
--- a/arch/arm/dts/r8a77950.dtsi
+++ b/arch/arm/dts/r8a77950.dtsi
@@ -7,6 +7,8 @@
#include "r8a77951.dtsi"
+#undef SOC_HAS_USB2_CH3
+
&audma0 {
iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>,
<&ipmmu_mp1 2>, <&ipmmu_mp1 3>,
@@ -29,8 +31,13 @@
<&ipmmu_mp1 30>, <&ipmmu_mp1 31>;
};
+&cluster0_opp {
+ /delete-node/ opp-1600000000;
+ /delete-node/ opp-1700000000;
+};
+
&du {
- vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>;
+ renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>;
};
&fcpvb1 {
@@ -77,7 +84,7 @@
/delete-node/ dma-controller@e6460000;
/delete-node/ dma-controller@e6470000;
- ipmmu_mp1: mmu@ec680000 {
+ ipmmu_mp1: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xec680000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 5>;
@@ -85,7 +92,7 @@
#iommu-cells = <1>;
};
- ipmmu_sy: mmu@e7730000 {
+ ipmmu_sy: iommu@e7730000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xe7730000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 8>;
@@ -93,11 +100,11 @@
#iommu-cells = <1>;
};
- /delete-node/ mmu@fd950000;
- /delete-node/ mmu@fd960000;
- /delete-node/ mmu@fd970000;
- /delete-node/ mmu@febe0000;
- /delete-node/ mmu@fe980000;
+ /delete-node/ iommu@fd950000;
+ /delete-node/ iommu@fd960000;
+ /delete-node/ iommu@fd970000;
+ /delete-node/ iommu@febe0000;
+ /delete-node/ iommu@fe980000;
xhci1: usb@ee040000 {
compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
@@ -187,6 +194,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/dts/r8a77951.dtsi b/arch/arm/dts/r8a77951.dtsi
index a8729eb744..07c8763c1e 100644
--- a/arch/arm/dts/r8a77951.dtsi
+++ b/arch/arm/dts/r8a77951.dtsi
@@ -11,22 +11,16 @@
#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+#define SOC_HAS_HDMI1
+#define SOC_HAS_SATA
+#define SOC_HAS_USB2_CH2
+#define SOC_HAS_USB2_CH3
+
/ {
compatible = "renesas,r8a7795";
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c_dvfs;
- };
-
/*
* The external audio clocks are configured as 0 Hz fixed frequency
* clocks by default.
@@ -57,7 +51,7 @@
clock-frequency = <0>;
};
- cluster0_opp: opp_table0 {
+ cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
@@ -91,7 +85,7 @@
};
};
- cluster1_opp: opp_table1 {
+ cluster1_opp: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
@@ -364,6 +358,7 @@
rwdt: watchdog@e6020000 {
compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -490,7 +485,7 @@
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7795";
reg = <0 0xe6060000 0 0x50c>;
};
@@ -616,6 +611,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -1073,7 +1133,7 @@
<&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
};
- ipmmu_ds0: mmu@e6740000 {
+ ipmmu_ds0: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xe6740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -1081,7 +1141,7 @@
#iommu-cells = <1>;
};
- ipmmu_ds1: mmu@e7740000 {
+ ipmmu_ds1: iommu@e7740000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xe7740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -1089,7 +1149,7 @@
#iommu-cells = <1>;
};
- ipmmu_hc: mmu@e6570000 {
+ ipmmu_hc: iommu@e6570000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xe6570000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -1097,7 +1157,7 @@
#iommu-cells = <1>;
};
- ipmmu_ir: mmu@ff8b0000 {
+ ipmmu_ir: iommu@ff8b0000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xff8b0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 3>;
@@ -1105,7 +1165,7 @@
#iommu-cells = <1>;
};
- ipmmu_mm: mmu@e67b0000 {
+ ipmmu_mm: iommu@e67b0000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xe67b0000 0 0x1000>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1114,7 +1174,7 @@
#iommu-cells = <1>;
};
- ipmmu_mp0: mmu@ec670000 {
+ ipmmu_mp0: iommu@ec670000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xec670000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -1122,7 +1182,7 @@
#iommu-cells = <1>;
};
- ipmmu_pv0: mmu@fd800000 {
+ ipmmu_pv0: iommu@fd800000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xfd800000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -1130,7 +1190,7 @@
#iommu-cells = <1>;
};
- ipmmu_pv1: mmu@fd950000 {
+ ipmmu_pv1: iommu@fd950000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xfd950000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 7>;
@@ -1138,7 +1198,7 @@
#iommu-cells = <1>;
};
- ipmmu_pv2: mmu@fd960000 {
+ ipmmu_pv2: iommu@fd960000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xfd960000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 8>;
@@ -1146,7 +1206,7 @@
#iommu-cells = <1>;
};
- ipmmu_pv3: mmu@fd970000 {
+ ipmmu_pv3: iommu@fd970000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xfd970000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 9>;
@@ -1154,7 +1214,7 @@
#iommu-cells = <1>;
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xffc80000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -1162,7 +1222,7 @@
#iommu-cells = <1>;
};
- ipmmu_vc0: mmu@fe6b0000 {
+ ipmmu_vc0: iommu@fe6b0000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xfe6b0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -1170,7 +1230,7 @@
#iommu-cells = <1>;
};
- ipmmu_vc1: mmu@fe6f0000 {
+ ipmmu_vc1: iommu@fe6f0000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xfe6f0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 13>;
@@ -1178,7 +1238,7 @@
#iommu-cells = <1>;
};
- ipmmu_vi0: mmu@febd0000 {
+ ipmmu_vi0: iommu@febd0000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xfebd0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -1186,7 +1246,7 @@
#iommu-cells = <1>;
};
- ipmmu_vi1: mmu@febe0000 {
+ ipmmu_vi1: iommu@febe0000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xfebe0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 15>;
@@ -1194,7 +1254,7 @@
#iommu-cells = <1>;
};
- ipmmu_vp0: mmu@fe990000 {
+ ipmmu_vp0: iommu@fe990000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xfe990000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 16>;
@@ -1202,7 +1262,7 @@
#iommu-cells = <1>;
};
- ipmmu_vp1: mmu@fe980000 {
+ ipmmu_vp1: iommu@fe980000 {
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xfe980000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 17>;
@@ -1247,9 +1307,12 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1294,6 +1357,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A7795_CLK_CANFD>,
<&can_clk>;
@@ -1945,12 +2009,12 @@
* clkout : #clock-cells = <0>; <&rcar_sound>;
* clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
*/
- compatible = "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3";
- reg = <0 0xec500000 0 0x1000>, /* SCU */
- <0 0xec5a0000 0 0x100>, /* ADG */
- <0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x280>, /* SSI */
- <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
+ compatible = "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&cpg CPG_MOD 1005>,
@@ -2204,7 +2268,7 @@
dma-names = "rx", "tx";
};
ssiu40: ssiu-32 {
- dmas = <&audma0 0x71>, <&audma1 0x72>;
+ dmas = <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx";
};
ssiu41: ssiu-33 {
@@ -2339,6 +2403,18 @@
};
};
+ mlp: mlp@ec520000 {
+ compatible = "renesas,r8a7795-mlp",
+ "renesas,rcar-gen3-mlp";
+ reg = <0 0xec520000 0 0x800>;
+ interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 802>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 802>;
+ status = "disabled";
+ };
+
audma0: dma-controller@ec700000 {
compatible = "renesas,dmac-r8a7795",
"renesas,rcar-dmac";
@@ -2590,12 +2666,13 @@
status = "disabled";
};
- sdhi0: sd@ee100000 {
+ sdhi0: mmc@ee100000 {
compatible = "renesas,sdhi-r8a7795",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 314>;
+ clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A7795_CLK_SD0H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 314>;
@@ -2603,12 +2680,13 @@
status = "disabled";
};
- sdhi1: sd@ee120000 {
+ sdhi1: mmc@ee120000 {
compatible = "renesas,sdhi-r8a7795",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 313>;
+ clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A7795_CLK_SD1H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 313>;
@@ -2616,12 +2694,13 @@
status = "disabled";
};
- sdhi2: sd@ee140000 {
+ sdhi2: mmc@ee140000 {
compatible = "renesas,sdhi-r8a7795",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 312>;
+ clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A7795_CLK_SD2H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 312>;
@@ -2629,12 +2708,13 @@
status = "disabled";
};
- sdhi3: sd@ee160000 {
+ sdhi3: mmc@ee160000 {
compatible = "renesas,sdhi-r8a7795",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 311>;
+ clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A7795_CLK_SD3H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 311>;
@@ -2642,6 +2722,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a7795-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x04000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sata: sata@ee300000 {
compatible = "renesas,sata-r8a7795",
"renesas,rcar-gen3-sata";
@@ -2725,6 +2821,44 @@
status = "disabled";
};
+ pciec0_ep: pcie-ep@fe000000 {
+ compatible = "renesas,r8a7795-pcie-ep",
+ "renesas,rcar-gen3-pcie-ep";
+ reg = <0x0 0xfe000000 0 0x80000>,
+ <0x0 0xfe100000 0 0x100000>,
+ <0x0 0xfe200000 0 0x200000>,
+ <0x0 0x30000000 0 0x8000000>,
+ <0x0 0x38000000 0 0x8000000>;
+ reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>;
+ clock-names = "pcie";
+ resets = <&cpg 319>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pciec1_ep: pcie-ep@ee800000 {
+ compatible = "renesas,r8a7795-pcie-ep",
+ "renesas,rcar-gen3-pcie-ep";
+ reg = <0x0 0xee800000 0 0x80000>,
+ <0x0 0xee900000 0 0x100000>,
+ <0x0 0xeea00000 0 0x200000>,
+ <0x0 0xc0000000 0 0x8000000>,
+ <0x0 0xc8000000 0 0x8000000>;
+ reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>;
+ clock-names = "pcie";
+ resets = <&cpg 318>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
imr-lx4@fe860000 {
compatible = "renesas,r8a7795-imr-lx4",
"renesas,imr-lx4";
@@ -2992,6 +3126,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -3047,6 +3185,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -3086,6 +3228,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -3177,14 +3323,15 @@
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 721>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>;
clock-names = "du.0", "du.1", "du.2", "du.3";
+ resets = <&cpg 724>, <&cpg 722>;
+ reset-names = "du.0", "du.2";
renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>;
- vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
+ renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>,
+ <&vspd0 1>;
status = "disabled";
@@ -3194,8 +3341,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -3238,8 +3383,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -3251,7 +3394,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -3266,7 +3409,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -3281,7 +3424,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm/dts/r8a77960-salvator-x.dts b/arch/arm/dts/r8a77960-salvator-x.dts
index ecfbeafeaf..d5543f26c4 100644
--- a/arch/arm/dts/r8a77960-salvator-x.dts
+++ b/arch/arm/dts/r8a77960-salvator-x.dts
@@ -35,49 +35,3 @@
clock-names = "du.0", "du.1", "du.2",
"dclkin.0", "dclkin.1", "dclkin.2";
};
-
-&hdmi0 {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
- rcar_dw_hdmi0_out: endpoint {
- remote-endpoint = <&hdmi0_con>;
- };
- };
- port@2 {
- reg = <2>;
- dw_hdmi0_snd_in: endpoint {
- remote-endpoint = <&rsnd_endpoint1>;
- };
- };
- };
-};
-
-&hdmi0_con {
- remote-endpoint = <&rcar_dw_hdmi0_out>;
-};
-
-&rcar_sound {
- ports {
- /* rsnd_port0 is on salvator-common */
- rsnd_port1: port@1 {
- reg = <1>;
- rsnd_endpoint1: endpoint {
- remote-endpoint = <&dw_hdmi0_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint1>;
- frame-master = <&rsnd_endpoint1>;
-
- playback = <&ssi2>;
- };
- };
- };
-};
-
-&sound_card {
- dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1>; /* HDMI0 */
-};
diff --git a/arch/arm/dts/r8a77960-ulcb.dts b/arch/arm/dts/r8a77960-ulcb.dts
index d041042a56..4bfeb1df04 100644
--- a/arch/arm/dts/r8a77960-ulcb.dts
+++ b/arch/arm/dts/r8a77960-ulcb.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car M3-W
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2016 Cogent Embedded, Inc.
diff --git a/arch/arm/dts/r8a77960.dtsi b/arch/arm/dts/r8a77960.dtsi
index 60f156cfd2..1424d4ad94 100644
--- a/arch/arm/dts/r8a77960.dtsi
+++ b/arch/arm/dts/r8a77960.dtsi
@@ -16,17 +16,6 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c_dvfs;
- };
-
/*
* The external audio clocks are configured as 0 Hz fixed frequency
* clocks by default.
@@ -57,24 +46,25 @@
clock-frequency = <0>;
};
- cluster0_opp: opp_table0 {
+ cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <820000>;
+ opp-microvolt = <830000>;
clock-latency-ns = <300000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <820000>;
+ opp-microvolt = <830000>;
clock-latency-ns = <300000>;
};
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <820000>;
+ opp-microvolt = <830000>;
clock-latency-ns = <300000>;
+ opp-suspend;
};
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
@@ -96,7 +86,7 @@
};
};
- cluster1_opp: opp_table1 {
+ cluster1_opp: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
@@ -333,6 +323,7 @@
compatible = "renesas,r8a7796-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -459,7 +450,7 @@
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7796";
reg = <0 0xe6060000 0 0x50c>;
};
@@ -585,6 +576,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -862,6 +918,15 @@
status = "disabled";
};
+ arm_cc630p: crypto@e6601000 {
+ compatible = "arm,cryptocell-630p-ree";
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0xe6601000 0 0x1000>;
+ clocks = <&cpg CPG_MOD 229>;
+ resets = <&cpg 229>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7796",
"renesas,rcar-dmac";
@@ -988,7 +1053,7 @@
<&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
};
- ipmmu_ds0: mmu@e6740000 {
+ ipmmu_ds0: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7796";
reg = <0 0xe6740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -996,7 +1061,7 @@
#iommu-cells = <1>;
};
- ipmmu_ds1: mmu@e7740000 {
+ ipmmu_ds1: iommu@e7740000 {
compatible = "renesas,ipmmu-r8a7796";
reg = <0 0xe7740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -1004,7 +1069,7 @@
#iommu-cells = <1>;
};
- ipmmu_hc: mmu@e6570000 {
+ ipmmu_hc: iommu@e6570000 {
compatible = "renesas,ipmmu-r8a7796";
reg = <0 0xe6570000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -1012,7 +1077,7 @@
#iommu-cells = <1>;
};
- ipmmu_ir: mmu@ff8b0000 {
+ ipmmu_ir: iommu@ff8b0000 {
compatible = "renesas,ipmmu-r8a7796";
reg = <0 0xff8b0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 3>;
@@ -1020,7 +1085,7 @@
#iommu-cells = <1>;
};
- ipmmu_mm: mmu@e67b0000 {
+ ipmmu_mm: iommu@e67b0000 {
compatible = "renesas,ipmmu-r8a7796";
reg = <0 0xe67b0000 0 0x1000>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1029,7 +1094,7 @@
#iommu-cells = <1>;
};
- ipmmu_mp: mmu@ec670000 {
+ ipmmu_mp: iommu@ec670000 {
compatible = "renesas,ipmmu-r8a7796";
reg = <0 0xec670000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -1037,7 +1102,7 @@
#iommu-cells = <1>;
};
- ipmmu_pv0: mmu@fd800000 {
+ ipmmu_pv0: iommu@fd800000 {
compatible = "renesas,ipmmu-r8a7796";
reg = <0 0xfd800000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 5>;
@@ -1045,7 +1110,7 @@
#iommu-cells = <1>;
};
- ipmmu_pv1: mmu@fd950000 {
+ ipmmu_pv1: iommu@fd950000 {
compatible = "renesas,ipmmu-r8a7796";
reg = <0 0xfd950000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -1053,7 +1118,7 @@
#iommu-cells = <1>;
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a7796";
reg = <0 0xffc80000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 7>;
@@ -1061,7 +1126,7 @@
#iommu-cells = <1>;
};
- ipmmu_vc0: mmu@fe6b0000 {
+ ipmmu_vc0: iommu@fe6b0000 {
compatible = "renesas,ipmmu-r8a7796";
reg = <0 0xfe6b0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 8>;
@@ -1069,7 +1134,7 @@
#iommu-cells = <1>;
};
- ipmmu_vi0: mmu@febd0000 {
+ ipmmu_vi0: iommu@febd0000 {
compatible = "renesas,ipmmu-r8a7796";
reg = <0 0xfebd0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 9>;
@@ -1114,9 +1179,12 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1161,6 +1229,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A7796_CLK_CANFD>,
<&can_clk>;
@@ -1812,12 +1881,12 @@
* clkout : #clock-cells = <0>; <&rcar_sound>;
* clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
*/
- compatible = "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3";
- reg = <0 0xec500000 0 0x1000>, /* SCU */
- <0 0xec5a0000 0 0x100>, /* ADG */
- <0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x280>, /* SSI */
- <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
+ compatible = "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&cpg CPG_MOD 1005>,
@@ -2124,7 +2193,7 @@
dma-names = "rx", "tx";
};
ssiu40: ssiu-32 {
- dmas = <&audma0 0x71>, <&audma1 0x72>;
+ dmas = <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx";
};
ssiu41: ssiu-33 {
@@ -2206,6 +2275,18 @@
};
};
+ mlp: mlp@ec520000 {
+ compatible = "renesas,r8a7796-mlp",
+ "renesas,rcar-gen3-mlp";
+ reg = <0 0xec520000 0 0x800>;
+ interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 802>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 802>;
+ status = "disabled";
+ };
+
audma0: dma-controller@ec700000 {
compatible = "renesas,dmac-r8a7796",
"renesas,rcar-dmac";
@@ -2385,12 +2466,13 @@
status = "disabled";
};
- sdhi0: sd@ee100000 {
+ sdhi0: mmc@ee100000 {
compatible = "renesas,sdhi-r8a7796",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 314>;
+ clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A7796_CLK_SD0H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 314>;
@@ -2398,12 +2480,13 @@
status = "disabled";
};
- sdhi1: sd@ee120000 {
+ sdhi1: mmc@ee120000 {
compatible = "renesas,sdhi-r8a7796",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 313>;
+ clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A7796_CLK_SD1H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 313>;
@@ -2411,12 +2494,13 @@
status = "disabled";
};
- sdhi2: sd@ee140000 {
+ sdhi2: mmc@ee140000 {
compatible = "renesas,sdhi-r8a7796",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 312>;
+ clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A7796_CLK_SD2H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 312>;
@@ -2424,12 +2508,13 @@
status = "disabled";
};
- sdhi3: sd@ee160000 {
+ sdhi3: mmc@ee160000 {
compatible = "renesas,sdhi-r8a7796",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 311>;
+ clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A7796_CLK_SD3H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 311>;
@@ -2437,6 +2522,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a7796-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x04000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -2685,6 +2786,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -2740,6 +2845,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -2818,13 +2927,14 @@
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>;
clock-names = "du.0", "du.1", "du.2";
+ resets = <&cpg 724>, <&cpg 722>;
+ reset-names = "du.0", "du.2";
renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>;
- vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+ renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
status = "disabled";
@@ -2834,8 +2944,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -2872,8 +2980,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -2885,7 +2991,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2900,7 +3006,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2915,7 +3021,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm/dts/r8a77965-salvator-x.dts b/arch/arm/dts/r8a77965-salvator-x.dts
index 660a0240ee..f84c64ed4d 100644
--- a/arch/arm/dts/r8a77965-salvator-x.dts
+++ b/arch/arm/dts/r8a77965-salvator-x.dts
@@ -30,48 +30,3 @@
clock-names = "du.0", "du.1", "du.3",
"dclkin.0", "dclkin.1", "dclkin.3";
};
-
-&hdmi0 {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
- rcar_dw_hdmi0_out: endpoint {
- remote-endpoint = <&hdmi0_con>;
- };
- };
- port@2 {
- reg = <2>;
- dw_hdmi0_snd_in: endpoint {
- remote-endpoint = <&rsnd_endpoint1>;
- };
- };
- };
-};
-
-&hdmi0_con {
- remote-endpoint = <&rcar_dw_hdmi0_out>;
-};
-
-&rcar_sound {
- ports {
- rsnd_port1: port@1 {
- reg = <1>;
- rsnd_endpoint1: endpoint {
- remote-endpoint = <&dw_hdmi0_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint1>;
- frame-master = <&rsnd_endpoint1>;
-
- playback = <&ssi2>;
- };
- };
- };
-};
-
-&sound_card {
- dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1>; /* HDMI0 */
-};
diff --git a/arch/arm/dts/r8a77965-ulcb.dts b/arch/arm/dts/r8a77965-ulcb.dts
index 964078b6cc..71704b67a2 100644
--- a/arch/arm/dts/r8a77965-ulcb.dts
+++ b/arch/arm/dts/r8a77965-ulcb.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board
+ * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board with R-Car M3-N
*
* Copyright (C) 2018 Renesas Electronics Corp.
* Copyright (C) 2018 Cogent Embedded, Inc.
diff --git a/arch/arm/dts/r8a77965.dtsi b/arch/arm/dts/r8a77965.dtsi
index c17d90bd16..997f29521f 100644
--- a/arch/arm/dts/r8a77965.dtsi
+++ b/arch/arm/dts/r8a77965.dtsi
@@ -14,22 +14,13 @@
#define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4
+#define SOC_HAS_SATA
+
/ {
compatible = "renesas,r8a77965";
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c_dvfs;
- };
-
/*
* The external audio clocks are configured as 0 Hz fixed frequency
* clocks by default.
@@ -60,7 +51,7 @@
clock-frequency = <0>;
};
- cluster0_opp: opp_table0 {
+ cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
@@ -111,6 +102,7 @@
power-domains = <&sysc R8A77965_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
#cooling-cells = <2>;
dynamic-power-coefficient = <854>;
clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
@@ -124,6 +116,7 @@
power-domains = <&sysc R8A77965_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
};
@@ -134,6 +127,19 @@
cache-unified;
cache-level = <2>;
};
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <400>;
+ exit-latency-us = <500>;
+ min-residency-us = <4000>;
+ };
+ };
};
extal_clk: extal {
@@ -188,6 +194,7 @@
compatible = "renesas,r8a77965-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -314,7 +321,7 @@
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a77965";
reg = <0 0xe6060000 0 0x50c>;
};
@@ -440,6 +447,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -717,6 +789,15 @@
status = "disabled";
};
+ arm_cc630p: crypto@e6601000 {
+ compatible = "arm,cryptocell-630p-ree";
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0xe6601000 0 0x1000>;
+ clocks = <&cpg CPG_MOD 229>;
+ resets = <&cpg 229>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a77965",
"renesas,rcar-dmac";
@@ -843,7 +924,7 @@
<&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
};
- ipmmu_ds0: mmu@e6740000 {
+ ipmmu_ds0: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a77965";
reg = <0 0xe6740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -851,7 +932,7 @@
#iommu-cells = <1>;
};
- ipmmu_ds1: mmu@e7740000 {
+ ipmmu_ds1: iommu@e7740000 {
compatible = "renesas,ipmmu-r8a77965";
reg = <0 0xe7740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -859,7 +940,7 @@
#iommu-cells = <1>;
};
- ipmmu_hc: mmu@e6570000 {
+ ipmmu_hc: iommu@e6570000 {
compatible = "renesas,ipmmu-r8a77965";
reg = <0 0xe6570000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -867,7 +948,7 @@
#iommu-cells = <1>;
};
- ipmmu_mm: mmu@e67b0000 {
+ ipmmu_mm: iommu@e67b0000 {
compatible = "renesas,ipmmu-r8a77965";
reg = <0 0xe67b0000 0 0x1000>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -876,7 +957,7 @@
#iommu-cells = <1>;
};
- ipmmu_mp: mmu@ec670000 {
+ ipmmu_mp: iommu@ec670000 {
compatible = "renesas,ipmmu-r8a77965";
reg = <0 0xec670000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -884,7 +965,7 @@
#iommu-cells = <1>;
};
- ipmmu_pv0: mmu@fd800000 {
+ ipmmu_pv0: iommu@fd800000 {
compatible = "renesas,ipmmu-r8a77965";
reg = <0 0xfd800000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -892,7 +973,7 @@
#iommu-cells = <1>;
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a77965";
reg = <0 0xffc80000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -900,7 +981,7 @@
#iommu-cells = <1>;
};
- ipmmu_vc0: mmu@fe6b0000 {
+ ipmmu_vc0: iommu@fe6b0000 {
compatible = "renesas,ipmmu-r8a77965";
reg = <0 0xfe6b0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -908,7 +989,7 @@
#iommu-cells = <1>;
};
- ipmmu_vi0: mmu@febd0000 {
+ ipmmu_vi0: iommu@febd0000 {
compatible = "renesas,ipmmu-r8a77965";
reg = <0 0xfebd0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -916,7 +997,7 @@
#iommu-cells = <1>;
};
- ipmmu_vp0: mmu@fe990000 {
+ ipmmu_vp0: iommu@fe990000 {
compatible = "renesas,ipmmu-r8a77965";
reg = <0 0xfe990000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 16>;
@@ -961,9 +1042,12 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1008,6 +1092,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A77965_CLK_CANFD>,
<&can_clk>;
@@ -1526,6 +1611,126 @@
};
};
+ drif00: rif@e6f40000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f40000 0 0x84>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 515>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 515>;
+ renesas,bonding = <&drif01>;
+ status = "disabled";
+ };
+
+ drif01: rif@e6f50000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f50000 0 0x84>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 514>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 514>;
+ renesas,bonding = <&drif00>;
+ status = "disabled";
+ };
+
+ drif10: rif@e6f60000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f60000 0 0x84>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 513>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 513>;
+ renesas,bonding = <&drif11>;
+ status = "disabled";
+ };
+
+ drif11: rif@e6f70000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f70000 0 0x84>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 512>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 512>;
+ renesas,bonding = <&drif10>;
+ status = "disabled";
+ };
+
+ drif20: rif@e6f80000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f80000 0 0x84>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 511>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 511>;
+ renesas,bonding = <&drif21>;
+ status = "disabled";
+ };
+
+ drif21: rif@e6f90000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f90000 0 0x84>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 510>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 510>;
+ renesas,bonding = <&drif20>;
+ status = "disabled";
+ };
+
+ drif30: rif@e6fa0000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6fa0000 0 0x84>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 509>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 509>;
+ renesas,bonding = <&drif31>;
+ status = "disabled";
+ };
+
+ drif31: rif@e6fb0000 {
+ compatible = "renesas,r8a77965-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6fb0000 0 0x84>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 508>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 508>;
+ renesas,bonding = <&drif30>;
+ status = "disabled";
+ };
+
rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
@@ -1539,12 +1744,12 @@
* clkout : #clock-cells = <0>; <&rcar_sound>;
* clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
*/
- compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3";
- reg = <0 0xec500000 0 0x1000>, /* SCU */
- <0 0xec5a0000 0 0x100>, /* ADG */
- <0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x280>, /* SSI */
- <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
+ compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&cpg CPG_MOD 1005>,
@@ -1798,7 +2003,7 @@
dma-names = "rx", "tx";
};
ssiu40: ssiu-32 {
- dmas = <&audma0 0x71>, <&audma1 0x72>;
+ dmas = <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx";
};
ssiu41: ssiu-33 {
@@ -1933,6 +2138,18 @@
};
};
+ mlp: mlp@ec520000 {
+ compatible = "renesas,r8a77965-mlp",
+ "renesas,rcar-gen3-mlp";
+ reg = <0 0xec520000 0 0x800>;
+ interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 802>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 802>;
+ status = "disabled";
+ };
+
audma0: dma-controller@ec700000 {
compatible = "renesas,dmac-r8a77965",
"renesas,rcar-dmac";
@@ -2096,12 +2313,13 @@
status = "disabled";
};
- sdhi0: sd@ee100000 {
+ sdhi0: mmc@ee100000 {
compatible = "renesas,sdhi-r8a77965",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 314>;
+ clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77965_CLK_SD0H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 314>;
@@ -2109,12 +2327,13 @@
status = "disabled";
};
- sdhi1: sd@ee120000 {
+ sdhi1: mmc@ee120000 {
compatible = "renesas,sdhi-r8a77965",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 313>;
+ clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A77965_CLK_SD1H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 313>;
@@ -2122,12 +2341,13 @@
status = "disabled";
};
- sdhi2: sd@ee140000 {
+ sdhi2: mmc@ee140000 {
compatible = "renesas,sdhi-r8a77965",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 312>;
+ clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A77965_CLK_SD2H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 312>;
@@ -2135,12 +2355,13 @@
status = "disabled";
};
- sdhi3: sd@ee160000 {
+ sdhi3: mmc@ee160000 {
compatible = "renesas,sdhi-r8a77965",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 311>;
+ clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A77965_CLK_SD3H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 311>;
@@ -2148,6 +2369,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a77965-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x04000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sata: sata@ee300000 {
compatible = "renesas,sata-r8a77965",
"renesas,rcar-gen3-sata";
@@ -2364,6 +2601,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -2419,6 +2660,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -2494,13 +2739,14 @@
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&cpg CPG_MOD 721>;
clock-names = "du.0", "du.1", "du.3";
+ resets = <&cpg 724>, <&cpg 722>;
+ reset-names = "du.0", "du.3";
renesas,cmms = <&cmm0>, <&cmm1>, <&cmm3>;
- vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+ renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
status = "disabled";
@@ -2510,8 +2756,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -2548,8 +2792,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -2561,7 +2803,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2576,7 +2818,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2591,7 +2833,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
diff --git a/arch/arm/dts/r8a77970-eagle.dts b/arch/arm/dts/r8a77970-eagle.dts
index 2afb91ec9c..004a5eacd4 100644
--- a/arch/arm/dts/r8a77970-eagle.dts
+++ b/arch/arm/dts/r8a77970-eagle.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the Eagle board
+ * Device Tree Source for the Eagle board with R-Car V3M
*
* Copyright (C) 2016-2017 Renesas Electronics Corp.
* Copyright (C) 2017 Cogent Embedded, Inc.
@@ -8,12 +8,18 @@
/dts-v1/;
#include "r8a77970.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas Eagle board based on r8a77970";
compatible = "renesas,eagle", "renesas,r8a77970";
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
serial0 = &scif0;
ethernet0 = &avb;
};
@@ -73,6 +79,12 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ x1_clk: x1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
};
&avb {
@@ -81,14 +93,18 @@
renesas,no-ether-link;
phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
+ rx-internal-delay-ps = <1800>;
+ tx-internal-delay-ps = <2000>;
status = "okay";
phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};
@@ -102,7 +118,23 @@
};
};
+&csi40 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max9286_out0>;
+ };
+ };
+ };
+};
+
&du {
+ clocks = <&cpg CPG_MOD 724>, <&x1_clk>;
+ clock-names = "du.0", "dclkin.0";
status = "okay";
};
@@ -137,8 +169,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
ports {
#address-cells = <1>;
@@ -161,6 +191,89 @@
};
};
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ gmsl0: gmsl-deserializer@48 {
+ compatible = "maxim,max9286";
+ reg = <0x48>;
+
+ maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ max9286_out0: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ status = "disabled";
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ status = "disabled";
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ status = "disabled";
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ status = "disabled";
+ };
+ };
+ };
+};
+
&lvds0 {
status = "okay";
@@ -189,12 +302,84 @@
function = "i2c0";
};
+ i2c3_pins: i2c3 {
+ groups = "i2c3_a";
+ function = "i2c3";
+ };
+
+ qspi0_pins: qspi0 {
+ groups = "qspi0_ctrl", "qspi0_data4";
+ function = "qspi0";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
};
};
+&rpc {
+ pinctrl-0 = <&qspi0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "spansion,s25fs512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ cr7@40000 {
+ reg = <0x00040000 0x080000>;
+ read-only;
+ };
+ cert_header_sa3@c0000 {
+ reg = <0x000c0000 0x080000>;
+ read-only;
+ };
+ bl2@140000 {
+ reg = <0x00140000 0x040000>;
+ read-only;
+ };
+ cert_header_sa6@180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@1c0000 {
+ reg = <0x001c0000 0x460000>;
+ read-only;
+ };
+ uboot@640000 {
+ reg = <0x00640000 0x0c0000>;
+ read-only;
+ };
+ uboot-env@700000 {
+ reg = <0x00700000 0x040000>;
+ read-only;
+ };
+ dtb@740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user@1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
+ };
+ };
+ };
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
diff --git a/arch/arm/dts/r8a77970.dtsi b/arch/arm/dts/r8a77970.dtsi
index 664a73a2cc..ed6e2e47c6 100644
--- a/arch/arm/dts/r8a77970.dtsi
+++ b/arch/arm/dts/r8a77970.dtsi
@@ -16,14 +16,6 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- };
-
/* External CAN clock - to be overridden by boards that provide it */
can_clk: can {
compatible = "fixed-clock";
@@ -108,6 +100,7 @@
compatible = "renesas,r8a77970-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -204,7 +197,7 @@
resets = <&cpg 907>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a77970";
reg = <0 0xe6060000 0 0x504>;
};
@@ -556,6 +549,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A77970_CLK_CANFD>,
<&can_clk>;
@@ -612,9 +606,12 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
iommus = <&ipmmu_rt 3>;
#address-cells = <1>;
#size-cells = <0>;
@@ -985,7 +982,7 @@
<&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
};
- ipmmu_ds1: mmu@e7740000 {
+ ipmmu_ds1: iommu@e7740000 {
compatible = "renesas,ipmmu-r8a77970";
reg = <0 0xe7740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -993,7 +990,7 @@
#iommu-cells = <1>;
};
- ipmmu_ir: mmu@ff8b0000 {
+ ipmmu_ir: iommu@ff8b0000 {
compatible = "renesas,ipmmu-r8a77970";
reg = <0 0xff8b0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 3>;
@@ -1001,7 +998,7 @@
#iommu-cells = <1>;
};
- ipmmu_mm: mmu@e67b0000 {
+ ipmmu_mm: iommu@e67b0000 {
compatible = "renesas,ipmmu-r8a77970";
reg = <0 0xe67b0000 0 0x1000>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1010,7 +1007,7 @@
#iommu-cells = <1>;
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a77970";
reg = <0 0xffc80000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 7>;
@@ -1018,7 +1015,7 @@
#iommu-cells = <1>;
};
- ipmmu_vi0: mmu@febd0000 {
+ ipmmu_vi0: iommu@febd0000 {
compatible = "renesas,ipmmu-r8a77970";
reg = <0 0xfebd0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 9>;
@@ -1039,6 +1036,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a77970-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x4000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1087,6 +1100,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -1121,7 +1138,9 @@
clock-names = "du.0";
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 724>;
- vsps = <&vspd0 0>;
+ reset-names = "du.0";
+ renesas,vsps = <&vspd0 0>;
+
status = "disabled";
ports {
@@ -1130,8 +1149,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
@@ -1164,8 +1181,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
diff --git a/arch/arm/dts/r8a77980-condor.dts b/arch/arm/dts/r8a77980-condor.dts
index f0a0a51d73..1d326552e2 100644
--- a/arch/arm/dts/r8a77980-condor.dts
+++ b/arch/arm/dts/r8a77980-condor.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the Condor board
+ * Device Tree Source for the Condor board with R-Car V3H
*
* Copyright (C) 2018 Renesas Electronics Corp.
* Copyright (C) 2018 Cogent Embedded, Inc.
@@ -8,279 +8,9 @@
/dts-v1/;
#include "r8a77980.dtsi"
+#include "condor-common.dtsi"
/ {
model = "Renesas Condor board based on r8a77980";
compatible = "renesas,condor", "renesas,r8a77980";
-
- aliases {
- serial0 = &scif0;
- ethernet0 = &gether;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- d1_8v: regulator-2 {
- compatible = "regulator-fixed";
- regulator-name = "D1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- d3_3v: regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "D3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- hdmi-out {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con: endpoint {
- remote-endpoint = <&adv7511_out>;
- };
- };
- };
-
- lvds-decoder {
- compatible = "thine,thc63lvd1024";
- vcc-supply = <&d3_3v>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- thc63lvd1024_in: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
- };
-
- port@2 {
- reg = <2>;
- thc63lvd1024_out: endpoint {
- remote-endpoint = <&adv7511_in>;
- };
- };
- };
- };
-
- memory@48000000 {
- device_type = "memory";
- /* first 128MB is reserved for secure area. */
- reg = <0 0x48000000 0 0x78000000>;
- };
-
- vddq_vin01: regulator-1 {
- compatible = "regulator-fixed";
- regulator-name = "VDDQ_VIN01";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- x1_clk: x1-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <148500000>;
- };
-};
-
-&canfd {
- pinctrl-0 = <&canfd0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- channel0 {
- status = "okay";
- };
-};
-
-&du {
- clocks = <&cpg CPG_MOD 724>,
- <&x1_clk>;
- clock-names = "du.0", "dclkin.0";
- status = "okay";
-};
-
-&extal_clk {
- clock-frequency = <16666666>;
-};
-
-&extalr_clk {
- clock-frequency = <32768>;
-};
-
-&gether {
- pinctrl-0 = <&gether_pins>;
- pinctrl-names = "default";
-
- phy-mode = "rgmii-id";
- phy-handle = <&phy0>;
- renesas,no-ether-link;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio4>;
- interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- io_expander0: gpio@20 {
- compatible = "onnn,pca9654";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- io_expander1: gpio@21 {
- compatible = "onnn,pca9654";
- reg = <0x21>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- hdmi@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
- avdd-supply = <&d1_8v>;
- dvdd-supply = <&d1_8v>;
- pvdd-supply = <&d1_8v>;
- bgvdd-supply = <&d1_8v>;
- dvdd-3v-supply = <&d3_3v>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&thc63lvd1024_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con>;
- };
- };
- };
- };
-};
-
-&lvds0 {
- status = "okay";
-
- ports {
- port@1 {
- lvds0_out: endpoint {
- remote-endpoint = <&thc63lvd1024_in>;
- };
- };
- };
-};
-
-&mmc0 {
- pinctrl-0 = <&mmc_pins>;
- pinctrl-1 = <&mmc_pins>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&d3_3v>;
- vqmmc-supply = <&vddq_vin01>;
- mmc-hs200-1_8v;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie_bus_clk {
- clock-frequency = <100000000>;
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pfc {
- canfd0_pins: canfd0 {
- groups = "canfd0_data_a";
- function = "canfd0";
- };
-
- gether_pins: gether {
- groups = "gether_mdio_a", "gether_rgmii",
- "gether_txcrefclk", "gether_txcrefclk_mega";
- function = "gether";
- };
-
- i2c0_pins: i2c0 {
- groups = "i2c0";
- function = "i2c0";
- };
-
- mmc_pins: mmc {
- groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
- function = "mmc";
- power-source = <1800>;
- };
-
- scif0_pins: scif0 {
- groups = "scif0_data";
- function = "scif0";
- };
-
- scif_clk_pins: scif_clk {
- groups = "scif_clk_b";
- function = "scif_clk";
- };
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
};
diff --git a/arch/arm/dts/r8a77980.dtsi b/arch/arm/dts/r8a77980.dtsi
index b340fb4699..c4ac28a0f7 100644
--- a/arch/arm/dts/r8a77980.dtsi
+++ b/arch/arm/dts/r8a77980.dtsi
@@ -16,15 +16,6 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- };
-
/* External CAN clock - to be overridden by boards that provide it */
can_clk: can {
compatible = "fixed-clock";
@@ -138,6 +129,7 @@
compatible = "renesas,r8a77980-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -234,7 +226,7 @@
resets = <&cpg 907>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a77980";
reg = <0 0xe6060000 0 0x50c>;
};
@@ -608,6 +600,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A77980_CLK_CANFD>,
<&can_clk>;
@@ -664,9 +657,12 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <2000>;
iommus = <&ipmmu_ds1 33>;
#address-cells = <1>;
#size-cells = <0>;
@@ -990,8 +986,8 @@
reg = <1>;
- vin4csi41: endpoint@2 {
- reg = <2>;
+ vin4csi41: endpoint@3 {
+ reg = <3>;
remote-endpoint = <&csi41vin4>;
};
};
@@ -1018,8 +1014,8 @@
reg = <1>;
- vin5csi41: endpoint@2 {
- reg = <2>;
+ vin5csi41: endpoint@3 {
+ reg = <3>;
remote-endpoint = <&csi41vin5>;
};
};
@@ -1046,8 +1042,8 @@
reg = <1>;
- vin6csi41: endpoint@2 {
- reg = <2>;
+ vin6csi41: endpoint@3 {
+ reg = <3>;
remote-endpoint = <&csi41vin6>;
};
};
@@ -1074,8 +1070,8 @@
reg = <1>;
- vin7csi41: endpoint@2 {
- reg = <2>;
+ vin7csi41: endpoint@3 {
+ reg = <3>;
remote-endpoint = <&csi41vin7>;
};
};
@@ -1266,7 +1262,7 @@
status = "disabled";
};
- ipmmu_ds1: mmu@e7740000 {
+ ipmmu_ds1: iommu@e7740000 {
compatible = "renesas,ipmmu-r8a77980";
reg = <0 0xe7740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -1274,7 +1270,7 @@
#iommu-cells = <1>;
};
- ipmmu_ir: mmu@ff8b0000 {
+ ipmmu_ir: iommu@ff8b0000 {
compatible = "renesas,ipmmu-r8a77980";
reg = <0 0xff8b0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 3>;
@@ -1282,7 +1278,7 @@
#iommu-cells = <1>;
};
- ipmmu_mm: mmu@e67b0000 {
+ ipmmu_mm: iommu@e67b0000 {
compatible = "renesas,ipmmu-r8a77980";
reg = <0 0xe67b0000 0 0x1000>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1291,7 +1287,7 @@
#iommu-cells = <1>;
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a77980";
reg = <0 0xffc80000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -1299,7 +1295,7 @@
#iommu-cells = <1>;
};
- ipmmu_vc0: mmu@fe990000 {
+ ipmmu_vc0: iommu@fe990000 {
compatible = "renesas,ipmmu-r8a77980";
reg = <0 0xfe990000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -1307,7 +1303,7 @@
#iommu-cells = <1>;
};
- ipmmu_vi0: mmu@febd0000 {
+ ipmmu_vi0: iommu@febd0000 {
compatible = "renesas,ipmmu-r8a77980";
reg = <0 0xfebd0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -1315,16 +1311,18 @@
#iommu-cells = <1>;
};
- ipmmu_vip0: mmu@e7b00000 {
+ ipmmu_vip0: iommu@e7b00000 {
compatible = "renesas,ipmmu-r8a77980";
reg = <0 0xe7b00000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 4>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
- ipmmu_vip1: mmu@e7960000 {
+ ipmmu_vip1: iommu@e7960000 {
compatible = "renesas,ipmmu-r8a77980";
reg = <0 0xe7960000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 11>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
@@ -1334,7 +1332,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 314>;
+ clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77980_CLK_SD0H>;
+ clock-names = "core", "clkh";
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 314>;
max-frequency = <200000000>;
@@ -1342,6 +1341,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a77980-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x4000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1418,6 +1433,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -1457,6 +1476,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -1484,15 +1507,16 @@
};
du: display@feb00000 {
- compatible = "renesas,du-r8a77980",
- "renesas,du-r8a77970";
+ compatible = "renesas,du-r8a77980";
reg = <0 0xfeb00000 0 0x80000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>;
clock-names = "du.0";
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 724>;
- vsps = <&vspd0 0>;
+ reset-names = "du.0";
+ renesas,vsps = <&vspd0 0>;
+
status = "disabled";
ports {
@@ -1501,8 +1525,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
@@ -1536,8 +1558,6 @@
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -1549,7 +1569,7 @@
};
thermal-zones {
- thermal-sensor-1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -1568,7 +1588,7 @@
};
};
- thermal-sensor-2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
diff --git a/arch/arm/dts/r8a77990-ebisu.dts b/arch/arm/dts/r8a77990-ebisu.dts
index 07a4c9bbae..9da0fd08f8 100644
--- a/arch/arm/dts/r8a77990-ebisu.dts
+++ b/arch/arm/dts/r8a77990-ebisu.dts
@@ -1,754 +1,15 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the ebisu board
+ * Device Tree Source for the Ebisu board with R-Car E3
*
* Copyright (C) 2018 Renesas Electronics Corp.
*/
/dts-v1/;
#include "r8a77990.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include "ebisu.dtsi"
/ {
model = "Renesas Ebisu board based on r8a77990";
compatible = "renesas,ebisu", "renesas,r8a77990";
-
- aliases {
- serial0 = &scif2;
- ethernet0 = &avb;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
- stdout-path = "serial0:115200n8";
- };
-
- audio_clkout: audio-clkout {
- /*
- * This is same as <&rcar_sound 0>
- * but needed to avoid cs2000/rcar_sound probe dead-lock
- */
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <11289600>;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm3 0 50000>;
-
- brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
- default-brightness-level = <10>;
-
- power-supply = <&reg_12p0v>;
- };
-
- cvbs-in {
- compatible = "composite-video-connector";
- label = "CVBS IN";
-
- port {
- cvbs_con: endpoint {
- remote-endpoint = <&adv7482_ain7>;
- };
- };
- };
-
- hdmi-in {
- compatible = "hdmi-connector";
- label = "HDMI IN";
- type = "a";
-
- port {
- hdmi_in_con: endpoint {
- remote-endpoint = <&adv7482_hdmi>;
- };
- };
- };
-
- hdmi-out {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_out: endpoint {
- remote-endpoint = <&adv7511_out>;
- };
- };
- };
-
- lvds-decoder {
- compatible = "thine,thc63lvd1024";
- vcc-supply = <&reg_3p3v>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- thc63lvd1024_in: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
- };
-
- port@2 {
- reg = <2>;
- thc63lvd1024_out: endpoint {
- remote-endpoint = <&adv7511_in>;
- };
- };
- };
- };
-
- memory@48000000 {
- device_type = "memory";
- /* first 128MB is reserved for secure area. */
- reg = <0x0 0x48000000 0x0 0x38000000>;
- };
-
- reg_1p8v: regulator0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_12p0v: regulator2 {
- compatible = "regulator-fixed";
- regulator-name = "D12.0V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- rsnd_ak4613: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,name = "rsnd-ak4613";
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcpu>;
- simple-audio-card,frame-master = <&sndcpu>;
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4613>;
- };
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
- };
-
- vbus0_usb2: regulator-vbus0-usb2 {
- compatible = "regulator-fixed";
-
- regulator-name = "USB20_VBUS_CN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
- vcc_sdhi1: regulator-vcc-sdhi1 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI1 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi1: regulator-vccq-sdhi1 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI1 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
- vga {
- compatible = "vga-connector";
-
- port {
- vga_in: endpoint {
- remote-endpoint = <&adv7123_out>;
- };
- };
- };
-
- vga-encoder {
- compatible = "adi,adv7123";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7123_in: endpoint {
- remote-endpoint = <&du_out_rgb>;
- };
- };
- port@1 {
- reg = <1>;
- adv7123_out: endpoint {
- remote-endpoint = <&vga_in>;
- };
- };
- };
- };
-
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24576000>;
- };
-
- x13_clk: x13 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <74250000>;
- };
-};
-
-&audio_clk_a {
- clock-frequency = <22579200>;
-};
-
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
- phy-handle = <&phy0>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio2>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
- /*
- * TX clock internal delay mode is required for reliable
- * 1Gbps communication using the KSZ9031RNX phy present on
- * the Ebisu board, however, TX clock internal delay mode
- * isn't supported on r8a77990. Thus, limit speed to
- * 100Mbps for reliable communication.
- */
- max-speed = <100>;
- };
-};
-
-&canfd {
- pinctrl-0 = <&canfd0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- channel0 {
- status = "okay";
- };
-};
-
-&csi40 {
- status = "okay";
-
- ports {
- port@0 {
- reg = <0>;
-
- csi40_in: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2>;
- remote-endpoint = <&adv7482_txa>;
- };
- };
- };
-};
-
-&du {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&x13_clk>;
- clock-names = "du.0", "du.1", "dclkin.0";
-
- ports {
- port@0 {
- endpoint {
- remote-endpoint = <&adv7123_in>;
- };
- };
- };
-};
-
-&ehci0 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&extal_clk {
- clock-frequency = <48000000>;
-};
-
-&hsusb {
- dr_mode = "otg";
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- io_expander: gpio@20 {
- compatible = "onnn,pca9654";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&gpio2>;
- interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
- };
-
- hdmi-encoder@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&thc63lvd1024_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con_out>;
- };
- };
- };
- };
-
- video-receiver@70 {
- compatible = "adi,adv7482";
- reg = <0x70>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&gpio0>;
- interrupt-names = "intrq1", "intrq2";
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
- <17 IRQ_TYPE_LEVEL_LOW>;
-
- port@7 {
- reg = <7>;
-
- adv7482_ain7: endpoint {
- remote-endpoint = <&cvbs_con>;
- };
- };
-
- port@8 {
- reg = <8>;
-
- adv7482_hdmi: endpoint {
- remote-endpoint = <&hdmi_in_con>;
- };
- };
-
- port@a {
- reg = <10>;
-
- adv7482_txa: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2>;
- remote-endpoint = <&csi40_in>;
- };
- };
- };
-};
-
-&i2c3 {
- status = "okay";
-
- ak4613: codec@10 {
- compatible = "asahi-kasei,ak4613";
- #sound-dai-cells = <0>;
- reg = <0x10>;
- clocks = <&rcar_sound 3>;
-
- asahi-kasei,in1-single-end;
- asahi-kasei,in2-single-end;
- asahi-kasei,out1-single-end;
- asahi-kasei,out2-single-end;
- asahi-kasei,out3-single-end;
- asahi-kasei,out4-single-end;
- asahi-kasei,out5-single-end;
- asahi-kasei,out6-single-end;
- };
-
- cs2000: clk-multiplier@4f {
- #clock-cells = <0>;
- compatible = "cirrus,cs2000-cp";
- reg = <0x4f>;
- clocks = <&audio_clkout>, <&x12_clk>;
- clock-names = "clk_in", "ref_clk";
-
- assigned-clocks = <&cs2000>;
- assigned-clock-rates = <24576000>; /* 1/1 divide */
- };
-};
-
-&i2c_dvfs {
- status = "okay";
-
- clock-frequency = <400000>;
-
- pmic: pmic@30 {
- pinctrl-0 = <&irq0_pins>;
- pinctrl-names = "default";
-
- compatible = "rohm,bd9571mwv";
- reg = <0x30>;
- interrupt-parent = <&intc_ex>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- rohm,ddr-backup-power = <0x1>;
- rohm,rstbmode-level;
- };
-};
-
-&lvds0 {
- status = "okay";
-
- clocks = <&cpg CPG_MOD 727>,
- <&x13_clk>,
- <&extal_clk>;
- clock-names = "fck", "dclkin.0", "extal";
-
- ports {
- port@1 {
- lvds0_out: endpoint {
- remote-endpoint = <&thc63lvd1024_in>;
- };
- };
- };
-};
-
-&lvds1 {
- /*
- * Even though the LVDS1 output is not connected, the encoder must be
- * enabled to supply a pixel clock to the DU for the DPAD output when
- * LVDS0 is in use.
- */
- status = "okay";
-
- clocks = <&cpg CPG_MOD 727>,
- <&x13_clk>,
- <&extal_clk>;
- clock-names = "fck", "dclkin.0", "extal";
-};
-
-&ohci0 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&pcie_bus_clk {
- clock-frequency = <100000000>;
-};
-
-&pciec0 {
- status = "okay";
-};
-
-&pfc {
- avb_pins: avb {
- mux {
- groups = "avb_link", "avb_mii";
- function = "avb";
- };
- };
-
- canfd0_pins: canfd0 {
- groups = "canfd0_data";
- function = "canfd0";
- };
-
- du_pins: du {
- groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
- function = "du";
- };
-
- irq0_pins: irq0 {
- groups = "intc_ex_irq0";
- function = "intc_ex";
- };
-
- pwm3_pins: pwm3 {
- groups = "pwm3_b";
- function = "pwm3";
- };
-
- pwm5_pins: pwm5 {
- groups = "pwm5_a";
- function = "pwm5";
- };
-
- scif2_pins: scif2 {
- groups = "scif2_data_a";
- function = "scif2";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi1_pins: sd1 {
- groups = "sdhi1_data4", "sdhi1_ctrl";
- function = "sdhi1";
- power-source = <3300>;
- };
-
- sdhi1_pins_uhs: sd1_uhs {
- groups = "sdhi1_data4", "sdhi1_ctrl";
- function = "sdhi1";
- power-source = <1800>;
- };
-
- sdhi3_pins: sd3 {
- groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
- function = "sdhi3";
- power-source = <1800>;
- };
-
- sound_clk_pins: sound_clk {
- groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
- "audio_clkout_a", "audio_clkout1_a";
- function = "audio_clk";
- };
-
- sound_pins: sound {
- groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
- function = "ssi";
- };
-
- usb0_pins: usb {
- groups = "usb0_b", "usb0_id";
- function = "usb0";
- };
-
- usb30_pins: usb30 {
- groups = "usb30";
- function = "usb30";
- };
-};
-
-&pwm3 {
- pinctrl-0 = <&pwm3_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pwm5 {
- pinctrl-0 = <&pwm5_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
- /* audio_clkout0/1/2/3 */
- #clock-cells = <1>;
- clock-frequency = <12288000 11289600>;
-
- status = "okay";
-
- /* update <audio_clk_b> to <cs2000> */
- clocks = <&cpg CPG_MOD 1005>,
- <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
- <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
- <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
- <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
- <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
- <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
- <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
- <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
- <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
- <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
- <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
- <&cpg CPG_CORE R8A77990_CLK_ZA2>;
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &src0 &dvc0>;
- capture = <&ssi1 &src1 &dvc1>;
- };
- };
-
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&sdhi1 {
- pinctrl-0 = <&sdhi1_pins>;
- pinctrl-1 = <&sdhi1_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi1>;
- vqmmc-supply = <&vccq_sdhi1>;
- cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&sdhi3 {
- /* used for on-board 8bit eMMC */
- pinctrl-0 = <&sdhi3_pins>;
- pinctrl-1 = <&sdhi3_pins>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&reg_3p3v>;
- vqmmc-supply = <&reg_1p8v>;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&ssi1 {
- shared-pin;
-};
-
-&usb2_phy0 {
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-
- vbus-supply = <&vbus0_usb2>;
- status = "okay";
-};
-
-&usb3_peri0 {
- companion = <&xhci0>;
- status = "okay";
-};
-
-&vin4 {
- status = "okay";
-};
-
-&vin5 {
- status = "okay";
-};
-
-&xhci0 {
- pinctrl-0 = <&usb30_pins>;
- pinctrl-names = "default";
-
- status = "okay";
};
diff --git a/arch/arm/dts/r8a77990.dtsi b/arch/arm/dts/r8a77990.dtsi
index 32d91f2102..3053b4b214 100644
--- a/arch/arm/dts/r8a77990.dtsi
+++ b/arch/arm/dts/r8a77990.dtsi
@@ -14,17 +14,6 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c7;
- };
-
/*
* The external audio clocks are configured as 0 Hz fixed frequency
* clocks by default.
@@ -55,7 +44,7 @@
clock-frequency = <0>;
};
- cluster1_opp: opp_table10 {
+ cluster1_opp: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
opp-800000000 {
@@ -88,6 +77,7 @@
power-domains = <&sysc R8A77990_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
dynamic-power-coefficient = <277>;
clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
@@ -100,6 +90,7 @@
power-domains = <&sysc R8A77990_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
@@ -110,6 +101,19 @@
cache-unified;
cache-level = <2>;
};
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <700>;
+ exit-latency-us = <700>;
+ min-residency-us = <5000>;
+ };
+ };
};
extal_clk: extal {
@@ -156,6 +160,7 @@
compatible = "renesas,r8a77990-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -267,7 +272,7 @@
resets = <&cpg 906>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a77990";
reg = <0 0xe6060000 0 0x508>;
};
@@ -275,8 +280,10 @@
i2c_dvfs: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,iic-r8a77990";
- reg = <0 0xe60b0000 0 0x15>;
+ compatible = "renesas,iic-r8a77990",
+ "renesas,rcar-gen3-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 926>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -405,6 +412,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -667,6 +739,15 @@
dma-channels = <2>;
};
+ arm_cc630p: crypto@e6601000 {
+ compatible = "arm,cryptocell-630p-ree";
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0xe6601000 0 0x1000>;
+ clocks = <&cpg CPG_MOD 229>;
+ resets = <&cpg 229>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a77990",
"renesas,rcar-dmac";
@@ -793,7 +874,7 @@
<&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
};
- ipmmu_ds0: mmu@e6740000 {
+ ipmmu_ds0: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xe6740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -801,7 +882,7 @@
#iommu-cells = <1>;
};
- ipmmu_ds1: mmu@e7740000 {
+ ipmmu_ds1: iommu@e7740000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xe7740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -809,7 +890,7 @@
#iommu-cells = <1>;
};
- ipmmu_hc: mmu@e6570000 {
+ ipmmu_hc: iommu@e6570000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xe6570000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -817,7 +898,7 @@
#iommu-cells = <1>;
};
- ipmmu_mm: mmu@e67b0000 {
+ ipmmu_mm: iommu@e67b0000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xe67b0000 0 0x1000>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -826,7 +907,7 @@
#iommu-cells = <1>;
};
- ipmmu_mp: mmu@ec670000 {
+ ipmmu_mp: iommu@ec670000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xec670000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -834,7 +915,7 @@
#iommu-cells = <1>;
};
- ipmmu_pv0: mmu@fd800000 {
+ ipmmu_pv0: iommu@fd800000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xfd800000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -842,7 +923,7 @@
#iommu-cells = <1>;
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xffc80000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -850,7 +931,7 @@
#iommu-cells = <1>;
};
- ipmmu_vc0: mmu@fe6b0000 {
+ ipmmu_vc0: iommu@fe6b0000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xfe6b0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -858,7 +939,7 @@
#iommu-cells = <1>;
};
- ipmmu_vi0: mmu@febd0000 {
+ ipmmu_vi0: iommu@febd0000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xfebd0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -866,7 +947,7 @@
#iommu-cells = <1>;
};
- ipmmu_vp0: mmu@fe990000 {
+ ipmmu_vp0: iommu@fe990000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xfe990000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 16>;
@@ -911,9 +992,11 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
@@ -958,6 +1041,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A77990_CLK_CANFD>,
<&can_clk>;
@@ -1168,9 +1252,8 @@
reg = <0 0xe6ea0000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 210>;
- dmas = <&dmac1 0x43>, <&dmac1 0x42>,
- <&dmac2 0x43>, <&dmac2 0x42>;
- dma-names = "tx", "rx", "tx", "rx";
+ dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+ dma-names = "tx", "rx";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 210>;
#address-cells = <1>;
@@ -1230,7 +1313,7 @@
vin4csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin4>;
+ remote-endpoint = <&csi40vin4>;
};
};
};
@@ -1258,12 +1341,132 @@
vin5csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin5>;
+ remote-endpoint = <&csi40vin5>;
};
};
};
};
+ drif00: rif@e6f40000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f40000 0 0x84>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 515>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 515>;
+ renesas,bonding = <&drif01>;
+ status = "disabled";
+ };
+
+ drif01: rif@e6f50000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f50000 0 0x84>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 514>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 514>;
+ renesas,bonding = <&drif00>;
+ status = "disabled";
+ };
+
+ drif10: rif@e6f60000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f60000 0 0x84>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 513>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 513>;
+ renesas,bonding = <&drif11>;
+ status = "disabled";
+ };
+
+ drif11: rif@e6f70000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f70000 0 0x84>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 512>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 512>;
+ renesas,bonding = <&drif10>;
+ status = "disabled";
+ };
+
+ drif20: rif@e6f80000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f80000 0 0x84>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 511>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x28>;
+ dma-names = "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 511>;
+ renesas,bonding = <&drif21>;
+ status = "disabled";
+ };
+
+ drif21: rif@e6f90000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f90000 0 0x84>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 510>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x2a>;
+ dma-names = "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 510>;
+ renesas,bonding = <&drif20>;
+ status = "disabled";
+ };
+
+ drif30: rif@e6fa0000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6fa0000 0 0x84>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 509>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x2c>;
+ dma-names = "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 509>;
+ renesas,bonding = <&drif31>;
+ status = "disabled";
+ };
+
+ drif31: rif@e6fb0000 {
+ compatible = "renesas,r8a77990-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6fb0000 0 0x84>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 508>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x2e>;
+ dma-names = "rx";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 508>;
+ renesas,bonding = <&drif30>;
+ status = "disabled";
+ };
+
rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
@@ -1277,12 +1480,12 @@
* clkout : #clock-cells = <0>; <&rcar_sound>;
* clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
*/
- compatible = "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3";
- reg = <0 0xec500000 0 0x1000>, /* SCU */
- <0 0xec5a0000 0 0x100>, /* ADG */
- <0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x280>, /* SSI */
- <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
+ compatible = "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&cpg CPG_MOD 1005>,
@@ -1470,6 +1673,18 @@
};
};
+ mlp: mlp@ec520000 {
+ compatible = "renesas,r8a77990-mlp",
+ "renesas,rcar-gen3-mlp";
+ reg = <0 0xec520000 0 0x800>;
+ interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 802>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 802>;
+ status = "disabled";
+ };
+
audma0: dma-controller@ec700000 {
compatible = "renesas,dmac-r8a77990",
"renesas,rcar-dmac";
@@ -1571,12 +1786,13 @@
status = "disabled";
};
- sdhi0: sd@ee100000 {
+ sdhi0: mmc@ee100000 {
compatible = "renesas,sdhi-r8a77990",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 314>;
+ clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77990_CLK_SD0H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 314>;
@@ -1584,12 +1800,13 @@
status = "disabled";
};
- sdhi1: sd@ee120000 {
+ sdhi1: mmc@ee120000 {
compatible = "renesas,sdhi-r8a77990",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 313>;
+ clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A77990_CLK_SD1H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 313>;
@@ -1597,12 +1814,13 @@
status = "disabled";
};
- sdhi3: sd@ee160000 {
+ sdhi3: mmc@ee160000 {
compatible = "renesas,sdhi-r8a77990",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 311>;
+ clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A77990_CLK_SD3H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 311>;
@@ -1610,6 +1828,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a77990-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x04000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1761,6 +1995,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -1784,14 +2022,13 @@
reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
resets = <&cpg 724>;
reset-names = "du.0";
renesas,cmms = <&cmm0>, <&cmm1>;
- vsps = <&vspd0 0>, <&vspd1 0>;
+ renesas,vsps = <&vspd0 0>, <&vspd1 0>;
status = "disabled";
@@ -1801,8 +2038,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
@@ -1844,8 +2079,6 @@
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -1871,8 +2104,6 @@
port@1 {
reg = <1>;
- lvds1_out: endpoint {
- };
};
};
};
@@ -1887,7 +2118,7 @@
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
- thermal-sensors = <&thermal 0>;
+ thermal-sensors = <&thermal>;
sustainable-power = <717>;
cooling-maps {
diff --git a/arch/arm/dts/r8a77995-draak.dts b/arch/arm/dts/r8a77995-draak.dts
index 67634cb01d..384825617f 100644
--- a/arch/arm/dts/r8a77995-draak.dts
+++ b/arch/arm/dts/r8a77995-draak.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the Draak board
+ * Device Tree Source for the Draak board with R-Car D3
*
* Copyright (C) 2016-2018 Renesas Electronics Corp.
* Copyright (C) 2017 Glider bvba
@@ -8,521 +8,9 @@
/dts-v1/;
#include "r8a77995.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include "draak.dtsi"
/ {
model = "Renesas Draak board based on r8a77995";
compatible = "renesas,draak", "renesas,r8a77995";
-
- aliases {
- serial0 = &scif2;
- ethernet0 = &avb;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 50000>;
-
- brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
- default-brightness-level = <10>;
-
- power-supply = <&reg_12p0v>;
- enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
- stdout-path = "serial0:115200n8";
- };
-
- composite-in {
- compatible = "composite-video-connector";
-
- port {
- composite_con_in: endpoint {
- remote-endpoint = <&adv7180_in>;
- };
- };
- };
-
- hdmi-in {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&adv7612_in>;
- };
- };
- };
-
- hdmi-out {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_out: endpoint {
- remote-endpoint = <&adv7511_out>;
- };
- };
- };
-
- lvds-decoder {
- compatible = "thine,thc63lvd1024";
- vcc-supply = <&reg_3p3v>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- thc63lvd1024_in: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
- };
-
- port@2 {
- reg = <2>;
- thc63lvd1024_out: endpoint {
- remote-endpoint = <&adv7511_in>;
- };
- };
- };
- };
-
- memory@48000000 {
- device_type = "memory";
- /* first 128MB is reserved for secure area. */
- reg = <0x0 0x48000000 0x0 0x18000000>;
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_12p0v: regulator-12p0v {
- compatible = "regulator-fixed";
- regulator-name = "D12.0V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vga {
- compatible = "vga-connector";
-
- port {
- vga_in: endpoint {
- remote-endpoint = <&adv7123_out>;
- };
- };
- };
-
- vga-encoder {
- compatible = "adi,adv7123";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7123_in: endpoint {
- remote-endpoint = <&du_out_rgb>;
- };
- };
- port@1 {
- reg = <1>;
- adv7123_out: endpoint {
- remote-endpoint = <&vga_in>;
- };
- };
- };
- };
-
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <74250000>;
- };
-};
-
-&avb {
- pinctrl-0 = <&avb0_pins>;
- pinctrl-names = "default";
- renesas,no-ether-link;
- phy-handle = <&phy0>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio5>;
- interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
- /*
- * TX clock internal delay mode is required for reliable
- * 1Gbps communication using the KSZ9031RNX phy present on
- * the Draak board, however, TX clock internal delay mode
- * isn't supported on r8a77995. Thus, limit speed to
- * 100Mbps for reliable communication.
- */
- max-speed = <100>;
- };
-};
-
-&can0 {
- pinctrl-0 = <&can0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&can1 {
- pinctrl-0 = <&can1_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&du {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&x12_clk>;
- clock-names = "du.0", "du.1", "dclkin.0";
-
- ports {
- port@0 {
- endpoint {
- remote-endpoint = <&adv7123_in>;
- };
- };
- };
-};
-
-&ehci0 {
- dr_mode = "host";
- status = "okay";
-};
-
-&extal_clk {
- clock-frequency = <48000000>;
-};
-
-&hsusb {
- dr_mode = "host";
- status = "okay";
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- composite-in@20 {
- compatible = "adi,adv7180cp";
- reg = <0x20>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7180_in: endpoint {
- remote-endpoint = <&composite_con_in>;
- };
- };
-
- port@3 {
- reg = <3>;
-
- /*
- * The VIN4 video input path is shared between
- * CVBS and HDMI inputs through SW[49-53]
- * switches.
- *
- * CVBS is the default selection, link it to
- * VIN4 here.
- */
- adv7180_out: endpoint {
- remote-endpoint = <&vin4_in>;
- };
- };
- };
-
- };
-
- hdmi-encoder@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
- reg-names = "main", "edid", "packet", "cec";
- interrupt-parent = <&gpio1>;
- interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
-
- /* Depends on LVDS */
- max-clock = <135000000>;
- min-vrefresh = <50>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&thc63lvd1024_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con_out>;
- };
- };
- };
- };
-
- hdmi-decoder@4c {
- compatible = "adi,adv7612";
- reg = <0x4c>;
- default-input = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- adv7612_in: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- /*
- * The VIN4 video input path is shared between
- * CVBS and HDMI inputs through SW[49-53]
- * switches.
- *
- * CVBS is the default selection, leave HDMI
- * not connected here.
- */
- adv7612_out: endpoint {
- pclk-sample = <0>;
- hsync-active = <0>;
- vsync-active = <0>;
- };
- };
- };
- };
-
- eeprom@50 {
- compatible = "rohm,br24t01", "atmel,24c01";
- reg = <0x50>;
- pagesize = <8>;
- };
-};
-
-&i2c1 {
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&lvds0 {
- status = "okay";
-
- clocks = <&cpg CPG_MOD 727>,
- <&x12_clk>,
- <&extal_clk>;
- clock-names = "fck", "dclkin.0", "extal";
-
- ports {
- port@1 {
- lvds0_out: endpoint {
- remote-endpoint = <&thc63lvd1024_in>;
- };
- };
- };
-};
-
-&lvds1 {
- /*
- * Even though the LVDS1 output is not connected, the encoder must be
- * enabled to supply a pixel clock to the DU for the DPAD output when
- * LVDS0 is in use.
- */
- status = "okay";
-
- clocks = <&cpg CPG_MOD 727>,
- <&x12_clk>,
- <&extal_clk>;
- clock-names = "fck", "dclkin.0", "extal";
-};
-
-&ohci0 {
- dr_mode = "host";
- status = "okay";
-};
-
-&pfc {
- avb0_pins: avb {
- mux {
- groups = "avb0_link", "avb0_mdio", "avb0_mii";
- function = "avb0";
- };
- };
-
- can0_pins: can0 {
- groups = "can0_data_a";
- function = "can0";
- };
-
- can1_pins: can1 {
- groups = "can1_data_a";
- function = "can1";
- };
-
- du_pins: du {
- groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
- function = "du";
- };
-
- i2c0_pins: i2c0 {
- groups = "i2c0";
- function = "i2c0";
- };
-
- i2c1_pins: i2c1 {
- groups = "i2c1";
- function = "i2c1";
- };
-
- pwm0_pins: pwm0 {
- groups = "pwm0_c";
- function = "pwm0";
- };
-
- pwm1_pins: pwm1 {
- groups = "pwm1_c";
- function = "pwm1";
- };
-
- scif2_pins: scif2 {
- groups = "scif2_data";
- function = "scif2";
- };
-
- sdhi2_pins: sd2 {
- groups = "mmc_data8", "mmc_ctrl";
- function = "mmc";
- power-source = <1800>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "mmc_data8", "mmc_ctrl";
- function = "mmc";
- power-source = <1800>;
- };
-
- usb0_pins: usb0 {
- groups = "usb0";
- function = "usb0";
- };
-
- vin4_pins_cvbs: vin4 {
- groups = "vin4_data8", "vin4_sync", "vin4_clk";
- function = "vin4";
- };
-};
-
-&pwm0 {
- pinctrl-0 = <&pwm0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pwm1 {
- pinctrl-0 = <&pwm1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&sdhi2 {
- /* used for on-board eMMC */
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&reg_3p3v>;
- vqmmc-supply = <&reg_1p8v>;
- bus-width = <8>;
- mmc-hs200-1_8v;
- non-removable;
- status = "okay";
-};
-
-&usb2_phy0 {
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-
- renesas,no-otg-pins;
- status = "okay";
-};
-
-&vin4 {
- pinctrl-0 = <&vin4_pins_cvbs>;
- pinctrl-names = "default";
-
- status = "okay";
-
- ports {
- port {
- vin4_in: endpoint {
- remote-endpoint = <&adv7180_out>;
- };
- };
- };
};
diff --git a/arch/arm/dts/r8a77995.dtsi b/arch/arm/dts/r8a77995.dtsi
index 9503007c34..f040d03e0a 100644
--- a/arch/arm/dts/r8a77995.dtsi
+++ b/arch/arm/dts/r8a77995.dtsi
@@ -15,6 +15,23 @@
#address-cells = <2>;
#size-cells = <2>;
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
/* External CAN clock - to be overridden by boards that provide it */
can_clk: can {
compatible = "fixed-clock";
@@ -77,6 +94,7 @@
compatible = "renesas,r8a77995-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -188,11 +206,81 @@
resets = <&cpg 906>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a77995";
reg = <0 0xe6060000 0 0x508>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a77995-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a77995-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a77995-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a77995-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77995-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -242,6 +330,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -389,12 +542,22 @@
dma-channels = <2>;
};
+ arm_cc630p: crypto@e6601000 {
+ compatible = "arm,cryptocell-630p-ree";
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0xe6601000 0 0x1000>;
+ clocks = <&cpg CPG_MOD 229>;
+ resets = <&cpg 229>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ };
+
canfd: can@e66c0000 {
compatible = "renesas,r8a77995-canfd",
"renesas,rcar-gen3-canfd";
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A77995_CLK_CANFD>,
<&can_clk>;
@@ -498,7 +661,7 @@
<&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
};
- ipmmu_ds0: mmu@e6740000 {
+ ipmmu_ds0: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a77995";
reg = <0 0xe6740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -506,7 +669,7 @@
#iommu-cells = <1>;
};
- ipmmu_ds1: mmu@e7740000 {
+ ipmmu_ds1: iommu@e7740000 {
compatible = "renesas,ipmmu-r8a77995";
reg = <0 0xe7740000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -514,7 +677,7 @@
#iommu-cells = <1>;
};
- ipmmu_hc: mmu@e6570000 {
+ ipmmu_hc: iommu@e6570000 {
compatible = "renesas,ipmmu-r8a77995";
reg = <0 0xe6570000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -522,7 +685,7 @@
#iommu-cells = <1>;
};
- ipmmu_mm: mmu@e67b0000 {
+ ipmmu_mm: iommu@e67b0000 {
compatible = "renesas,ipmmu-r8a77995";
reg = <0 0xe67b0000 0 0x1000>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -531,7 +694,7 @@
#iommu-cells = <1>;
};
- ipmmu_mp: mmu@ec670000 {
+ ipmmu_mp: iommu@ec670000 {
compatible = "renesas,ipmmu-r8a77995";
reg = <0 0xec670000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -539,7 +702,7 @@
#iommu-cells = <1>;
};
- ipmmu_pv0: mmu@fd800000 {
+ ipmmu_pv0: iommu@fd800000 {
compatible = "renesas,ipmmu-r8a77995";
reg = <0 0xfd800000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -547,7 +710,7 @@
#iommu-cells = <1>;
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a77995";
reg = <0 0xffc80000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -555,7 +718,7 @@
#iommu-cells = <1>;
};
- ipmmu_vc0: mmu@fe6b0000 {
+ ipmmu_vc0: iommu@fe6b0000 {
compatible = "renesas,ipmmu-r8a77995";
reg = <0 0xfe6b0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -563,7 +726,7 @@
#iommu-cells = <1>;
};
- ipmmu_vi0: mmu@febd0000 {
+ ipmmu_vi0: iommu@febd0000 {
compatible = "renesas,ipmmu-r8a77995";
reg = <0 0xfebd0000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -571,7 +734,7 @@
#iommu-cells = <1>;
};
- ipmmu_vp0: mmu@fe990000 {
+ ipmmu_vp0: iommu@fe990000 {
compatible = "renesas,ipmmu-r8a77995";
reg = <0 0xfe990000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 16>;
@@ -616,9 +779,11 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <1800>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
@@ -870,6 +1035,159 @@
status = "disabled";
};
+ rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
+ <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&cpg CPG_CORE R8A77995_CLK_ZA2>;
+ clock-names = "ssi-all",
+ "ssi.4", "ssi.3",
+ "src.6", "src.5",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_i";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1011>, <&cpg 1012>;
+ reset-names = "ssi-all",
+ "ssi.4", "ssi.3";
+ status = "disabled";
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma0 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma0 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,src {
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma0 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma0 0x08>,
+ <&audma0 0x6f>, <&audma0 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma0 0x0a>,
+ <&audma0 0x71>, <&audma0 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+ };
+
+ mlp: mlp@ec520000 {
+ compatible = "renesas,r8a77995-mlp",
+ "renesas,rcar-gen3-mlp";
+ reg = <0 0xec520000 0 0x800>;
+ interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 802>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 802>;
+ status = "disabled";
+ };
+
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a77995",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+ <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+ <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+ <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+ <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+ <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+ <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+ <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+ };
+
ohci0: usb@ee080000 {
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
@@ -907,12 +1225,13 @@
status = "disabled";
};
- sdhi2: sd@ee140000 {
+ sdhi2: mmc@ee140000 {
compatible = "renesas,sdhi-r8a77995",
"renesas,rcar-gen3-sdhi";
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 312>;
+ clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A77995_CLK_SD0H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 312>;
@@ -920,6 +1239,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a77995-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x04000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1017,14 +1352,13 @@
reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
resets = <&cpg 724>;
reset-names = "du.0";
renesas,cmms = <&cmm0>, <&cmm1>;
- vsps = <&vspd0 0>, <&vspd1 0>;
+ renesas,vsps = <&vspd0 0>, <&vspd1 0>;
status = "disabled";
@@ -1034,8 +1368,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
@@ -1077,8 +1409,6 @@
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -1104,8 +1434,6 @@
port@1 {
reg = <1>;
- lvds1_out: endpoint {
- };
};
};
};
diff --git a/arch/arm/dts/r8a779a0-falcon-cpu.dtsi b/arch/arm/dts/r8a779a0-falcon-cpu.dtsi
index fa284a7260..99b73e21c8 100644
--- a/arch/arm/dts/r8a779a0-falcon-cpu.dtsi
+++ b/arch/arm/dts/r8a779a0-falcon-cpu.dtsi
@@ -6,12 +6,84 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
#include "r8a779a0.dtsi"
/ {
model = "Renesas Falcon CPU board";
compatible = "renesas,falcon-cpu", "renesas,r8a779a0";
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ serial0 = &scif0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keys_pins>;
+ pinctrl-names = "default";
+
+ key-1 {
+ gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW47";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+
+ key-2 {
+ gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW48";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+
+ key-3 {
+ gpios = <&gpio6 20 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW49";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+ led-2 {
+ gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ };
+ led-3 {
+ gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <3>;
+ };
+ };
+
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
@@ -33,6 +105,27 @@
reg = <0x7 0x00000000 0x0 0x80000000>;
};
+ mini-dp-con {
+ compatible = "dp-connector";
+ label = "CN5";
+ type = "mini";
+
+ port {
+ mini_dp_con_in: endpoint {
+ remote-endpoint = <&sn65dsi86_out>;
+ };
+ };
+ };
+
+ reg_1p2v: regulator-1p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
@@ -50,24 +143,31 @@
regulator-boot-on;
regulator-always-on;
};
+
+ sn65dsi86_refclk: clk-x6 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ };
};
-&avb0 {
- pinctrl-0 = <&avb0_pins>;
- pinctrl-names = "default";
- phy-handle = <&phy0>;
- tx-internal-delay-ps = <2000>;
+&dsi0 {
status = "okay";
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio4>;
- interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+ ports {
+ port@1 {
+ dsi0_out: endpoint {
+ remote-endpoint = <&sn65dsi86_in>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
};
};
+&du {
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <16666666>;
};
@@ -82,6 +182,13 @@
status = "okay";
clock-frequency = <400000>;
+
+ eeprom@50 {
+ compatible = "rohm,br24g01", "atmel,24c01";
+ label = "cpu-board";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
};
&i2c1 {
@@ -90,6 +197,44 @@
status = "okay";
clock-frequency = <400000>;
+
+ bridge@2c {
+ pinctrl-0 = <&irq0_pins>;
+ pinctrl-names = "default";
+
+ compatible = "ti,sn65dsi86";
+ reg = <0x2c>;
+
+ clocks = <&sn65dsi86_refclk>;
+ clock-names = "refclk";
+
+ interrupt-parent = <&intc_ex>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ vccio-supply = <&reg_1p8v>;
+ vpll-supply = <&reg_1p8v>;
+ vcca-supply = <&reg_1p2v>;
+ vcc-supply = <&reg_1p2v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ sn65dsi86_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ sn65dsi86_out: endpoint {
+ remote-endpoint = <&mini_dp_con_in>;
+ };
+ };
+ };
+ };
};
&i2c6 {
@@ -121,24 +266,6 @@
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
- avb0_pins: avb0 {
- mux {
- groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
- function = "avb0";
- };
-
- pins_mdio {
- groups = "avb0_mdio";
- drive-strength = <21>;
- };
-
- pins_mii {
- groups = "avb0_rgmii";
- drive-strength = <21>;
- };
-
- };
-
i2c0_pins: i2c0 {
groups = "i2c0";
function = "i2c0";
@@ -154,12 +281,27 @@
function = "i2c6";
};
+ irq0_pins: irq0 {
+ groups = "intc_ex_irq0";
+ function = "intc_ex";
+ };
+
+ keys_pins: keys {
+ pins = "GP_6_18", "GP_6_19", "GP_6_20";
+ bias-pull-up;
+ };
+
mmc_pins: mmc {
groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
function = "mmc";
power-source = <1800>;
};
+ qspi0_pins: qspi0 {
+ groups = "qspi0_ctrl", "qspi0_data4";
+ function = "qspi0";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data", "scif0_ctrl";
function = "scif0";
@@ -171,6 +313,39 @@
};
};
+&rpc {
+ pinctrl-0 = <&qspi0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "spansion,s25fs512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ reg = <0x0 0xcc0000>;
+ read-only;
+ };
+ user@cc0000 {
+ reg = <0xcc0000 0x3340000>;
+ };
+ };
+ };
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/dts/r8a779a0-falcon-csi-dsi.dtsi b/arch/arm/dts/r8a779a0-falcon-csi-dsi.dtsi
new file mode 100644
index 0000000000..e06b8eda85
--- /dev/null
+++ b/arch/arm/dts/r8a779a0-falcon-csi-dsi.dtsi
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Falcon CSI/DSI sub-board
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max96712_out0>;
+ };
+ };
+ };
+};
+
+&csi42 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi42_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max96712_out1>;
+ };
+ };
+ };
+};
+
+&csi43 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi43_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max96712_out2>;
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pca9654_a: gpio@21 {
+ compatible = "onnn,pca9654";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9654_b: gpio@22 {
+ compatible = "onnn,pca9654";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9654_c: gpio@23 {
+ compatible = "onnn,pca9654";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom@52 {
+ compatible = "rohm,br24g01", "atmel,24c01";
+ label = "csi-dsi-sub-board-id";
+ reg = <0x52>;
+ pagesize = <8>;
+ };
+};
+
+&i2c1 {
+ gmsl0: gmsl-deserializer@49 {
+ compatible = "maxim,max96712";
+ reg = <0x49>;
+ enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ max96712_out0: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+ };
+
+ gmsl1: gmsl-deserializer@4b {
+ compatible = "maxim,max96712";
+ reg = <0x4b>;
+ enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ max96712_out1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ lane-polarities = <0 0 0 0 1>;
+ remote-endpoint = <&csi42_in>;
+ };
+ };
+ };
+ };
+
+ gmsl2: gmsl-deserializer@6b {
+ compatible = "maxim,max96712";
+ reg = <0x6b>;
+ enable-gpios = <&pca9654_c 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ max96712_out2: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ lane-polarities = <0 0 0 0 1>;
+ remote-endpoint = <&csi43_in>;
+ };
+ };
+ };
+ };
+};
+
+&isp0 {
+ status = "okay";
+};
+
+&isp2 {
+ status = "okay";
+};
+
+&isp3 {
+ status = "okay";
+};
+
+&vin00 {
+ status = "okay";
+};
+
+&vin01 {
+ status = "okay";
+};
+
+&vin02 {
+ status = "okay";
+};
+
+&vin03 {
+ status = "okay";
+};
+
+&vin04 {
+ status = "okay";
+};
+
+&vin05 {
+ status = "okay";
+};
+
+&vin06 {
+ status = "okay";
+};
+
+&vin07 {
+ status = "okay";
+};
+
+&vin16 {
+ status = "okay";
+};
+
+&vin17 {
+ status = "okay";
+};
+
+&vin18 {
+ status = "okay";
+};
+
+&vin19 {
+ status = "okay";
+};
+
+&vin20 {
+ status = "okay";
+};
+
+&vin21 {
+ status = "okay";
+};
+
+&vin22 {
+ status = "okay";
+};
+
+&vin23 {
+ status = "okay";
+};
+
+&vin24 {
+ status = "okay";
+};
+
+&vin25 {
+ status = "okay";
+};
+
+&vin26 {
+ status = "okay";
+};
+
+&vin27 {
+ status = "okay";
+};
+
+&vin28 {
+ status = "okay";
+};
+
+&vin29 {
+ status = "okay";
+};
+
+&vin30 {
+ status = "okay";
+};
+
+&vin31 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/r8a779a0-falcon-ethernet.dtsi b/arch/arm/dts/r8a779a0-falcon-ethernet.dtsi
new file mode 100644
index 0000000000..e11bf9ace7
--- /dev/null
+++ b/arch/arm/dts/r8a779a0-falcon-ethernet.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Falcon Ethernet sub-board
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+&i2c0 {
+ eeprom@53 {
+ compatible = "rohm,br24g01", "atmel,24c01";
+ label = "ethernet-sub-board-id";
+ reg = <0x53>;
+ pagesize = <8>;
+ };
+};
diff --git a/arch/arm/dts/r8a779a0-falcon-u-boot.dts b/arch/arm/dts/r8a779a0-falcon-u-boot.dts
index 06d3922a38..9d28791c60 100644
--- a/arch/arm/dts/r8a779a0-falcon-u-boot.dts
+++ b/arch/arm/dts/r8a779a0-falcon-u-boot.dts
@@ -21,7 +21,7 @@
spi-max-frequency = <50000000>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
diff --git a/arch/arm/dts/r8a779a0-falcon.dts b/arch/arm/dts/r8a779a0-falcon.dts
index 5617b81dd7..b2e67b82ca 100644
--- a/arch/arm/dts/r8a779a0-falcon.dts
+++ b/arch/arm/dts/r8a779a0-falcon.dts
@@ -1,12 +1,14 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the Falcon CPU and BreakOut boards
+ * Device Tree Source for the Falcon CPU and BreakOut boards with R-Car V3U
*
* Copyright (C) 2020 Renesas Electronics Corp.
*/
/dts-v1/;
#include "r8a779a0-falcon-cpu.dtsi"
+#include "r8a779a0-falcon-csi-dsi.dtsi"
+#include "r8a779a0-falcon-ethernet.dtsi"
/ {
model = "Renesas Falcon CPU and Breakout boards based on r8a779a0";
@@ -14,15 +16,77 @@
aliases {
ethernet0 = &avb0;
- serial0 = &scif0;
};
+};
+
+&avb0 {
+ pinctrl-0 = <&avb0_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy0>;
+ tx-internal-delay-ps = <2000>;
+ status = "okay";
- chosen {
- stdout-path = "serial0:115200n8";
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
};
};
-&rwdt {
- timeout-sec = <60>;
+&canfd {
+ pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>;
+ pinctrl-names = "default";
status = "okay";
+
+ channel0 {
+ status = "okay";
+ };
+
+ channel1 {
+ status = "okay";
+ };
+};
+
+&i2c0 {
+ eeprom@51 {
+ compatible = "rohm,br24g01", "atmel,24c01";
+ label = "breakout-board";
+ reg = <0x51>;
+ pagesize = <8>;
+ };
+};
+
+&pfc {
+ avb0_pins: avb0 {
+ mux {
+ groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
+ "avb0_txcrefclk";
+ function = "avb0";
+ };
+
+ pins_mdio {
+ groups = "avb0_mdio";
+ drive-strength = <21>;
+ };
+
+ pins_mii {
+ groups = "avb0_rgmii";
+ drive-strength = <21>;
+ };
+
+ };
+
+ canfd0_pins: canfd0 {
+ groups = "canfd0_data";
+ function = "canfd0";
+ };
+
+ canfd1_pins: canfd1 {
+ groups = "canfd1_data";
+ function = "canfd1";
+ };
};
diff --git a/arch/arm/dts/r8a779a0.dtsi b/arch/arm/dts/r8a779a0.dtsi
index dfd6ae8b56..ed9400f903 100644
--- a/arch/arm/dts/r8a779a0.dtsi
+++ b/arch/arm/dts/r8a779a0.dtsi
@@ -14,14 +14,11 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
};
cpus {
@@ -34,6 +31,7 @@
device_type = "cpu";
power-domains = <&sysc R8A779A0_PD_A1E0D0C0>;
next-level-cache = <&L3_CA76_0>;
+ clocks = <&cpg CPG_CORE R8A779A0_CLK_Z0>;
};
L3_CA76_0: cache-controller-0 {
@@ -60,10 +58,7 @@
pmu_a76 {
compatible = "arm,cortex-a76-pmu";
- interrupts-extended = <&gic GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
- <&gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
- <&gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
- <&gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
};
/* External SCIF clock - to be overridden by boards that provide it */
@@ -82,15 +77,16 @@
rwdt: watchdog@e6020000 {
compatible = "renesas,r8a779a0-wdt",
- "renesas,rcar-gen3-wdt";
+ "renesas,rcar-gen4-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 907>;
status = "disabled";
};
- pfc: pin-controller@e6050000 {
+ pfc: pinctrl@e6050000 {
compatible = "renesas,pfc-r8a779a0";
reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
<0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>,
@@ -100,12 +96,13 @@
};
gpio0: gpio@e6058180 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6058180 0 0x54>;
interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 916>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 916>;
+ resets = <&cpg 916>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 0 28>;
@@ -114,12 +111,13 @@
};
gpio1: gpio@e6050180 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6050180 0 0x54>;
interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 915>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 915>;
+ resets = <&cpg 915>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 32 31>;
@@ -128,12 +126,13 @@
};
gpio2: gpio@e6050980 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6050980 0 0x54>;
interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 915>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 915>;
+ resets = <&cpg 915>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 64 25>;
@@ -142,12 +141,13 @@
};
gpio3: gpio@e6058980 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6058980 0 0x54>;
interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 916>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 916>;
+ resets = <&cpg 916>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 96 17>;
@@ -156,12 +156,13 @@
};
gpio4: gpio@e6060180 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6060180 0 0x54>;
interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 917>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 917>;
+ resets = <&cpg 917>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 128 27>;
@@ -170,12 +171,13 @@
};
gpio5: gpio@e6060980 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6060980 0 0x54>;
interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 917>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 917>;
+ resets = <&cpg 917>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 160 21>;
@@ -184,12 +186,13 @@
};
gpio6: gpio@e6068180 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6068180 0 0x54>;
interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 918>;
+ resets = <&cpg 918>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 192 21>;
@@ -198,12 +201,13 @@
};
gpio7: gpio@e6068980 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6068980 0 0x54>;
interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 918>;
+ resets = <&cpg 918>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 224 21>;
@@ -212,12 +216,13 @@
};
gpio8: gpio@e6069180 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6069180 0 0x54>;
interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 918>;
+ resets = <&cpg 918>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 256 21>;
@@ -226,12 +231,13 @@
};
gpio9: gpio@e6069980 {
- compatible = "renesas,gpio-r8a779a0";
+ compatible = "renesas,gpio-r8a779a0",
+ "renesas,rcar-gen4-gpio";
reg = <0 0xe6069980 0 0x54>;
interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 918>;
+ resets = <&cpg 918>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 288 21>;
@@ -239,6 +245,76 @@
#interrupt-cells = <2>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a779a0-cmt0",
+ "renesas,rcar-gen4-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 910>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a779a0-cmt1",
+ "renesas,rcar-gen4-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 911>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a779a0-cmt1",
+ "renesas,rcar-gen4-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 912>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a779a0-cmt1",
+ "renesas,rcar-gen4-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 913>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 913>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a779a0-cpg-mssr";
reg = <0 0xe6150000 0 0x4000>;
@@ -260,9 +336,102 @@
#power-domain-cells = <1>;
};
+ tsc: thermal@e6190000 {
+ compatible = "renesas,r8a779a0-thermal";
+ reg = <0 0xe6190000 0 0x200>,
+ <0 0xe6198000 0 0x200>,
+ <0 0xe61a0000 0 0x200>,
+ <0 0xe61a8000 0 0x200>,
+ <0 0xe61b0000 0 0x200>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ intc_ex: interrupt-controller@e61c0000 {
+ compatible = "renesas,intc-ex-r8a779a0", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_CORE R8A779A0_CLK_CP>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ };
+
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 713>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 713>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 714>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 714>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 715>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 715>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 717>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 717>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe6500000 0 0x40>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 518>;
@@ -278,7 +447,7 @@
i2c1: i2c@e6508000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 519>;
@@ -294,7 +463,7 @@
i2c2: i2c@e6510000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe6510000 0 0x40>;
interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 520>;
@@ -310,7 +479,7 @@
i2c3: i2c@e66d0000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe66d0000 0 0x40>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 521>;
@@ -326,7 +495,7 @@
i2c4: i2c@e66d8000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe66d8000 0 0x40>;
interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
@@ -342,7 +511,7 @@
i2c5: i2c@e66e0000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe66e0000 0 0x40>;
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 523>;
@@ -358,7 +527,7 @@
i2c6: i2c@e66e8000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe66e8000 0 0x40>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 524>;
@@ -374,7 +543,7 @@
hscif0: serial@e6540000 {
compatible = "renesas,hscif-r8a779a0",
- "renesas,rcar-gen3-hscif", "renesas,hscif";
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
reg = <0 0xe6540000 0 0x60>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 514>,
@@ -390,7 +559,7 @@
hscif1: serial@e6550000 {
compatible = "renesas,hscif-r8a779a0",
- "renesas,rcar-gen3-hscif", "renesas,hscif";
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
reg = <0 0xe6550000 0 0x60>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 515>,
@@ -406,7 +575,7 @@
hscif2: serial@e6560000 {
compatible = "renesas,hscif-r8a779a0",
- "renesas,rcar-gen3-hscif", "renesas,hscif";
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
reg = <0 0xe6560000 0 0x60>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 516>,
@@ -422,7 +591,7 @@
hscif3: serial@e66a0000 {
compatible = "renesas,hscif-r8a779a0",
- "renesas,rcar-gen3-hscif", "renesas,hscif";
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
reg = <0 0xe66a0000 0 0x60>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 517>,
@@ -436,6 +605,55 @@
status = "disabled";
};
+ canfd: can@e6660000 {
+ compatible = "renesas,r8a779a0-canfd";
+ reg = <0 0xe6660000 0 0x8000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
+ clocks = <&cpg CPG_MOD 328>,
+ <&cpg CPG_CORE R8A779A0_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A779A0_CLK_CANFD>;
+ assigned-clock-rates = <80000000>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+
+ channel1 {
+ status = "disabled";
+ };
+
+ channel2 {
+ status = "disabled";
+ };
+
+ channel3 {
+ status = "disabled";
+ };
+
+ channel4 {
+ status = "disabled";
+ };
+
+ channel5 {
+ status = "disabled";
+ };
+
+ channel6 {
+ status = "disabled";
+ };
+
+ channel7 {
+ status = "disabled";
+ };
+ };
+
avb0: ethernet@e6800000 {
compatible = "renesas,etheravb-r8a779a0",
"renesas,etheravb-rcar-gen3";
@@ -473,6 +691,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 211>;
+ clock-names = "fck";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 211>;
phy-mode = "rgmii";
@@ -520,6 +739,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 212>;
+ clock-names = "fck";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 212>;
phy-mode = "rgmii";
@@ -567,6 +787,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 213>;
+ clock-names = "fck";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 213>;
phy-mode = "rgmii";
@@ -614,6 +835,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 214>;
+ clock-names = "fck";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 214>;
phy-mode = "rgmii";
@@ -661,6 +883,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 215>;
+ clock-names = "fck";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 215>;
phy-mode = "rgmii";
@@ -708,6 +931,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 216>;
+ clock-names = "fck";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 216>;
phy-mode = "rgmii";
@@ -720,7 +944,7 @@
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a779a0",
- "renesas,rcar-gen3-scif", "renesas,scif";
+ "renesas,rcar-gen4-scif", "renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>,
@@ -736,7 +960,7 @@
scif1: serial@e6e68000 {
compatible = "renesas,scif-r8a779a0",
- "renesas,rcar-gen3-scif", "renesas,scif";
+ "renesas,rcar-gen4-scif", "renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>,
@@ -752,7 +976,7 @@
scif3: serial@e6c50000 {
compatible = "renesas,scif-r8a779a0",
- "renesas,rcar-gen3-scif", "renesas,scif";
+ "renesas,rcar-gen4-scif", "renesas,scif";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>,
@@ -768,7 +992,7 @@
scif4: serial@e6c40000 {
compatible = "renesas,scif-r8a779a0",
- "renesas,rcar-gen3-scif", "renesas,scif";
+ "renesas,rcar-gen4-scif", "renesas,scif";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 705>,
@@ -782,6 +1006,17 @@
status = "disabled";
};
+ tpu: pwm@e6e80000 {
+ compatible = "renesas,tpu-r8a779a0", "renesas,tpu";
+ reg = <0 0xe6e80000 0 0x148>;
+ interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 718>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 718>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
msiof0: spi@e6e90000 {
compatible = "renesas,msiof-r8a779a0",
"renesas,rcar-gen3-msiof";
@@ -872,8 +1107,905 @@
status = "disabled";
};
+ vin00: video@e6ef0000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 730>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 730>;
+ renesas,id = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin00isp0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&isp0vin00>;
+ };
+ };
+ };
+ };
+
+ vin01: video@e6ef1000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 731>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 731>;
+ renesas,id = <1>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin01isp0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&isp0vin01>;
+ };
+ };
+ };
+ };
+
+ vin02: video@e6ef2000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 800>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 800>;
+ renesas,id = <2>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin02isp0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&isp0vin02>;
+ };
+ };
+ };
+ };
+
+ vin03: video@e6ef3000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ef3000 0 0x1000>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 801>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 801>;
+ renesas,id = <3>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin03isp0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&isp0vin03>;
+ };
+ };
+ };
+ };
+
+ vin04: video@e6ef4000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ef4000 0 0x1000>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 802>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 802>;
+ renesas,id = <4>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin04isp0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&isp0vin04>;
+ };
+ };
+ };
+ };
+
+ vin05: video@e6ef5000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ef5000 0 0x1000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 803>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 803>;
+ renesas,id = <5>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin05isp0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&isp0vin05>;
+ };
+ };
+ };
+ };
+
+ vin06: video@e6ef6000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ef6000 0 0x1000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 804>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 804>;
+ renesas,id = <6>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin06isp0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&isp0vin06>;
+ };
+ };
+ };
+ };
+
+ vin07: video@e6ef7000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ef7000 0 0x1000>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 805>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 805>;
+ renesas,id = <7>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin07isp0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&isp0vin07>;
+ };
+ };
+ };
+ };
+
+ vin08: video@e6ef8000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ef8000 0 0x1000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 806>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 806>;
+ renesas,id = <8>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin08isp1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&isp1vin08>;
+ };
+ };
+ };
+ };
+
+ vin09: video@e6ef9000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ef9000 0 0x1000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 807>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 807>;
+ renesas,id = <9>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin09isp1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&isp1vin09>;
+ };
+ };
+ };
+ };
+
+ vin10: video@e6efa000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6efa000 0 0x1000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 808>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 808>;
+ renesas,id = <10>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin10isp1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&isp1vin10>;
+ };
+ };
+ };
+ };
+
+ vin11: video@e6efb000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6efb000 0 0x1000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 809>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
+ renesas,id = <11>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin11isp1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&isp1vin11>;
+ };
+ };
+ };
+ };
+
+ vin12: video@e6efc000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6efc000 0 0x1000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 810>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 810>;
+ renesas,id = <12>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin12isp1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&isp1vin12>;
+ };
+ };
+ };
+ };
+
+ vin13: video@e6efd000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6efd000 0 0x1000>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 811>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
+ renesas,id = <13>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin13isp1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&isp1vin13>;
+ };
+ };
+ };
+ };
+
+ vin14: video@e6efe000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6efe000 0 0x1000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 812>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
+ renesas,id = <14>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin14isp1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&isp1vin14>;
+ };
+ };
+ };
+ };
+
+ vin15: video@e6eff000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6eff000 0 0x1000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 813>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 813>;
+ renesas,id = <15>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin15isp1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&isp1vin15>;
+ };
+ };
+ };
+ };
+
+ vin16: video@e6ed0000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ed0000 0 0x1000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 814>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 814>;
+ renesas,id = <16>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin16isp2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&isp2vin16>;
+ };
+ };
+ };
+ };
+
+ vin17: video@e6ed1000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ed1000 0 0x1000>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 815>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 815>;
+ renesas,id = <17>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin17isp2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&isp2vin17>;
+ };
+ };
+ };
+ };
+
+ vin18: video@e6ed2000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ed2000 0 0x1000>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 816>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 816>;
+ renesas,id = <18>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin18isp2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&isp2vin18>;
+ };
+ };
+ };
+ };
+
+ vin19: video@e6ed3000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ed3000 0 0x1000>;
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 817>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 817>;
+ renesas,id = <19>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin19isp2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&isp2vin19>;
+ };
+ };
+ };
+ };
+
+ vin20: video@e6ed4000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ed4000 0 0x1000>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 818>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 818>;
+ renesas,id = <20>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin20isp2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&isp2vin20>;
+ };
+ };
+ };
+ };
+
+ vin21: video@e6ed5000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ed5000 0 0x1000>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 819>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 819>;
+ renesas,id = <21>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin21isp2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&isp2vin21>;
+ };
+ };
+ };
+ };
+
+ vin22: video@e6ed6000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ed6000 0 0x1000>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 820>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 820>;
+ renesas,id = <22>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin22isp2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&isp2vin22>;
+ };
+ };
+ };
+ };
+
+ vin23: video@e6ed7000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ed7000 0 0x1000>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 821>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 821>;
+ renesas,id = <23>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin23isp2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&isp2vin23>;
+ };
+ };
+ };
+ };
+
+ vin24: video@e6ed8000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ed8000 0 0x1000>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 822>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 822>;
+ renesas,id = <24>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin24isp3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&isp3vin24>;
+ };
+ };
+ };
+ };
+
+ vin25: video@e6ed9000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ed9000 0 0x1000>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 823>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 823>;
+ renesas,id = <25>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin25isp3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&isp3vin25>;
+ };
+ };
+ };
+ };
+
+ vin26: video@e6eda000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6eda000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 824>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 824>;
+ renesas,id = <26>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin26isp3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&isp3vin26>;
+ };
+ };
+ };
+ };
+
+ vin27: video@e6edb000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6edb000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 825>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 825>;
+ renesas,id = <27>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin27isp3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&isp3vin27>;
+ };
+ };
+ };
+ };
+
+ vin28: video@e6edc000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6edc000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 826>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 826>;
+ renesas,id = <28>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin28isp3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&isp3vin28>;
+ };
+ };
+ };
+ };
+
+ vin29: video@e6edd000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6edd000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 827>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 827>;
+ renesas,id = <29>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin29isp3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&isp3vin29>;
+ };
+ };
+ };
+ };
+
+ vin30: video@e6ede000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6ede000 0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 828>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 828>;
+ renesas,id = <30>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin30isp3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&isp3vin30>;
+ };
+ };
+ };
+ };
+
+ vin31: video@e6edf000 {
+ compatible = "renesas,vin-r8a779a0";
+ reg = <0 0xe6edf000 0 0x1000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 829>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 829>;
+ renesas,id = <31>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <2>;
+
+ vin31isp3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&isp3vin31>;
+ };
+ };
+ };
+ };
+
dmac1: dma-controller@e7350000 {
- compatible = "renesas,dmac-r8a779a0";
+ compatible = "renesas,dmac-r8a779a0",
+ "renesas,rcar-gen4-dmac";
reg = <0 0xe7350000 0 0x1000>,
<0 0xe7300000 0 0x10000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
@@ -907,7 +2039,8 @@
};
dmac2: dma-controller@e7351000 {
- compatible = "renesas,dmac-r8a779a0";
+ compatible = "renesas,dmac-r8a779a0",
+ "renesas,rcar-gen4-dmac";
reg = <0 0xe7351000 0 0x1000>,
<0 0xe7310000 0 0x10000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
@@ -932,16 +2065,143 @@
mmc0: mmc@ee140000 {
compatible = "renesas,sdhi-r8a779a0",
- "renesas,rcar-gen3-sdhi";
+ "renesas,rcar-gen4-sdhi";
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 706>;
+ clocks = <&cpg CPG_MOD 706>, <&cpg CPG_CORE R8A779A0_CLK_SD0H>;
+ clock-names = "core", "clkh";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 706>;
max-frequency = <200000000>;
+ iommus = <&ipmmu_ds0 32>;
+ status = "disabled";
+ };
+
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a779a0-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x04000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 629>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 629>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
+ ipmmu_rt0: iommu@ee480000 {
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xee480000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 10>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_rt1: iommu@ee4c0000 {
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xee4c0000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 19>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_ds0: iommu@eed00000 {
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeed00000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 0>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_ds1: iommu@eed40000 {
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeed40000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 1>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_ir: iommu@eed80000 {
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeed80000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 3>;
+ power-domains = <&sysc R8A779A0_PD_A3IR>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vc0: iommu@eedc0000 {
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeedc0000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 12>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vi0: iommu@eee80000 {
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeee80000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 14>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vi1: iommu@eeec0000 {
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeeec0000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 15>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_3dg: iommu@eee00000 {
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeee00000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 6>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vip0: iommu@eef00000 {
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeef00000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 5>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vip1: iommu@eef40000 {
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeef40000 0 0x20000>;
+ renesas,ipmmu-main = <&ipmmu_mm 11>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_mm: iommu@eefc0000 {
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
+ reg = <0 0xeefc0000 0 0x20000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
gic: interrupt-controller@f1000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
@@ -951,7 +2211,570 @@
<0x0 0xf1060000 0 0x110000>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ fcpvd0: fcp@fea10000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea10000 0 0x200>;
+ clocks = <&cpg CPG_MOD 508>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 508>;
+ };
+
+ fcpvd1: fcp@fea11000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea11000 0 0x200>;
+ clocks = <&cpg CPG_MOD 509>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 509>;
+ };
+
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x5000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 830>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 830>;
+
+ renesas,fcp = <&fcpvd0>;
+ };
+
+ vspd1: vsp@fea28000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea28000 0 0x5000>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 831>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 831>;
+
+ renesas,fcp = <&fcpvd1>;
+ };
+
+ csi40: csi2@feaa0000 {
+ compatible = "renesas,r8a779a0-csi2";
+ reg = <0 0xfeaa0000 0 0x10000>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ csi40isp0: endpoint {
+ remote-endpoint = <&isp0csi40>;
+ };
+ };
+ };
+ };
+
+ csi41: csi2@feab0000 {
+ compatible = "renesas,r8a779a0-csi2";
+ reg = <0 0xfeab0000 0 0x10000>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 400>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 400>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ csi41isp1: endpoint {
+ remote-endpoint = <&isp1csi41>;
+ };
+ };
+ };
+ };
+
+ csi42: csi2@fed60000 {
+ compatible = "renesas,r8a779a0-csi2";
+ reg = <0 0xfed60000 0 0x10000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 401>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 401>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ csi42isp2: endpoint {
+ remote-endpoint = <&isp2csi42>;
+ };
+ };
+ };
+ };
+
+ csi43: csi2@fed70000 {
+ compatible = "renesas,r8a779a0-csi2";
+ reg = <0 0xfed70000 0 0x10000>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ csi43isp3: endpoint {
+ remote-endpoint = <&isp3csi43>;
+ };
+ };
+ };
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a779a0";
+ reg = <0 0xfeb00000 0 0x40000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 411>;
+ clock-names = "du.0";
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 411>;
+ reset-names = "du.0";
+ renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_dsi0: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ du_out_dsi1: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+
+ isp0: isp@fed00000 {
+ compatible = "renesas,r8a779a0-isp";
+ reg = <0 0xfed00000 0 0x10000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 612>;
+ power-domains = <&sysc R8A779A0_PD_A3ISP01>;
+ resets = <&cpg 612>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0>;
+
+ isp0csi40: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi40isp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ isp0vin00: endpoint {
+ remote-endpoint = <&vin00isp0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ isp0vin01: endpoint {
+ remote-endpoint = <&vin01isp0>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ isp0vin02: endpoint {
+ remote-endpoint = <&vin02isp0>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ isp0vin03: endpoint {
+ remote-endpoint = <&vin03isp0>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ isp0vin04: endpoint {
+ remote-endpoint = <&vin04isp0>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ isp0vin05: endpoint {
+ remote-endpoint = <&vin05isp0>;
+ };
+ };
+
+ port@7 {
+ reg = <7>;
+ isp0vin06: endpoint {
+ remote-endpoint = <&vin06isp0>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+ isp0vin07: endpoint {
+ remote-endpoint = <&vin07isp0>;
+ };
+ };
+ };
+ };
+
+ isp1: isp@fed20000 {
+ compatible = "renesas,r8a779a0-isp";
+ reg = <0 0xfed20000 0 0x10000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 613>;
+ power-domains = <&sysc R8A779A0_PD_A3ISP01>;
+ resets = <&cpg 613>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0>;
+
+ isp1csi41: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&csi41isp1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ isp1vin08: endpoint {
+ remote-endpoint = <&vin08isp1>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ isp1vin09: endpoint {
+ remote-endpoint = <&vin09isp1>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ isp1vin10: endpoint {
+ remote-endpoint = <&vin10isp1>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ isp1vin11: endpoint {
+ remote-endpoint = <&vin11isp1>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ isp1vin12: endpoint {
+ remote-endpoint = <&vin12isp1>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ isp1vin13: endpoint {
+ remote-endpoint = <&vin13isp1>;
+ };
+ };
+
+ port@7 {
+ reg = <7>;
+ isp1vin14: endpoint {
+ remote-endpoint = <&vin14isp1>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+ isp1vin15: endpoint {
+ remote-endpoint = <&vin15isp1>;
+ };
+ };
+ };
+ };
+
+ isp2: isp@fed30000 {
+ compatible = "renesas,r8a779a0-isp";
+ reg = <0 0xfed30000 0 0x10000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 614>;
+ power-domains = <&sysc R8A779A0_PD_A3ISP23>;
+ resets = <&cpg 614>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0>;
+
+ isp2csi42: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi42isp2>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ isp2vin16: endpoint {
+ remote-endpoint = <&vin16isp2>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ isp2vin17: endpoint {
+ remote-endpoint = <&vin17isp2>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ isp2vin18: endpoint {
+ remote-endpoint = <&vin18isp2>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ isp2vin19: endpoint {
+ remote-endpoint = <&vin19isp2>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ isp2vin20: endpoint {
+ remote-endpoint = <&vin20isp2>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ isp2vin21: endpoint {
+ remote-endpoint = <&vin21isp2>;
+ };
+ };
+
+ port@7 {
+ reg = <7>;
+ isp2vin22: endpoint {
+ remote-endpoint = <&vin22isp2>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+ isp2vin23: endpoint {
+ remote-endpoint = <&vin23isp2>;
+ };
+ };
+ };
+ };
+
+ isp3: isp@fed40000 {
+ compatible = "renesas,r8a779a0-isp";
+ reg = <0 0xfed40000 0 0x10000>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 615>;
+ power-domains = <&sysc R8A779A0_PD_A3ISP23>;
+ resets = <&cpg 615>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0>;
+
+ isp3csi43: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&csi43isp3>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ isp3vin24: endpoint {
+ remote-endpoint = <&vin24isp3>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ isp3vin25: endpoint {
+ remote-endpoint = <&vin25isp3>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ isp3vin26: endpoint {
+ remote-endpoint = <&vin26isp3>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ isp3vin27: endpoint {
+ remote-endpoint = <&vin27isp3>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ isp3vin28: endpoint {
+ remote-endpoint = <&vin28isp3>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ isp3vin29: endpoint {
+ remote-endpoint = <&vin29isp3>;
+ };
+ };
+
+ port@7 {
+ reg = <7>;
+ isp3vin30: endpoint {
+ remote-endpoint = <&vin30isp3>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+ isp3vin31: endpoint {
+ remote-endpoint = <&vin31isp3>;
+ };
+ };
+ };
+ };
+
+ dsi0: dsi-encoder@fed80000 {
+ compatible = "renesas,r8a779a0-dsi-csi2-tx";
+ reg = <0 0xfed80000 0 0x10000>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ clocks = <&cpg CPG_MOD 415>,
+ <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+ <&cpg CPG_CORE R8A779A0_CLK_CL16MCK>;
+ clock-names = "fck", "dsi", "pll";
+ resets = <&cpg 415>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&du_out_dsi0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ dsi1: dsi-encoder@fed90000 {
+ compatible = "renesas,r8a779a0-dsi-csi2-tx";
+ reg = <0 0xfed90000 0 0x10000>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ clocks = <&cpg CPG_MOD 416>,
+ <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+ <&cpg CPG_CORE R8A779A0_CLK_CL16MCK>;
+ clock-names = "fck", "dsi", "pll";
+ resets = <&cpg 416>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&du_out_dsi1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
};
prr: chipid@fff00044 {
@@ -960,6 +2783,78 @@
};
};
+ thermal-zones {
+ sensor1_thermal: sensor1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor2_thermal: sensor2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor3_thermal: sensor3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
+
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor4_thermal: sensor4-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 3>;
+
+ trips {
+ sensor4_crit: sensor4-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor5_thermal: sensor5-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 4>;
+
+ trips {
+ sensor5_crit: sensor5-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi
index ff88af8e39..29cedf4dc1 100644
--- a/arch/arm/dts/ulcb.dtsi
+++ b/arch/arm/dts/ulcb.dtsi
@@ -21,8 +21,18 @@
model = "Renesas R-Car Gen3 ULCB board";
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c_dvfs;
serial0 = &scif2;
ethernet0 = &avb;
+ mmc0 = &sdhi2;
+ mmc1 = &sdhi0;
};
chosen {
@@ -46,6 +56,7 @@
port {
hdmi0_con: endpoint {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
};
};
};
@@ -73,7 +84,7 @@
};
};
- reg_1p8v: regulator0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
@@ -82,7 +93,7 @@
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
@@ -92,11 +103,11 @@
};
sound_card: sound {
- compatible = "audio-graph-card";
+ compatible = "audio-graph-card2";
label = "rcar-sound";
- dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1 /* HDMI0 */
+ links = <&rsnd_port0 /* ak4613 */
+ &rsnd_port1 /* HDMI0 */
>;
};
@@ -136,6 +147,10 @@
};
};
+&a57_0 {
+ cpu-supply = <&dvfs>;
+};
+
&audio_clk_a {
clock-frequency = <22579200>;
};
@@ -144,10 +159,12 @@
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
- phy-mode = "rgmii-txid";
+ tx-internal-delay-ps = <2000>;
status = "okay";
phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio2>;
@@ -191,10 +208,6 @@
};
};
-&hdmi0_con {
- remote-endpoint = <&rcar_dw_hdmi0_out>;
-};
-
&i2c2 {
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
@@ -365,7 +378,7 @@
};
&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
@@ -403,25 +416,68 @@
reg = <0>;
rsnd_for_ak4613: endpoint {
remote-endpoint = <&ak4613_endpoint>;
-
- dai-format = "left_j";
- bitclock-master = <&rsnd_for_ak4613>;
- frame-master = <&rsnd_for_ak4613>;
-
- playback = <&ssi0 &src0 &dvc0>;
- capture = <&ssi1 &src1 &dvc1>;
+ bitclock-master;
+ frame-master;
+ playback = <&ssi0>, <&src0>, <&dvc0>;
+ capture = <&ssi1>, <&src1>, <&dvc1>;
};
};
rsnd_port1: port@1 {
reg = <1>;
rsnd_for_hdmi: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
+ bitclock-master;
+ frame-master;
+ playback = <&ssi2>;
+ };
+ };
+ };
+};
- dai-format = "i2s";
- bitclock-master = <&rsnd_for_hdmi>;
- frame-master = <&rsnd_for_hdmi>;
+&rpc {
+ /* Left disabled. To be enabled by firmware when unlocked. */
- playback = <&ssi2>;
+ flash@0 {
+ compatible = "cypress,hyperflash", "cfi-flash";
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ bl2@40000 {
+ reg = <0x00040000 0x140000>;
+ read-only;
+ };
+ cert_header_sa6@180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@1c0000 {
+ reg = <0x001c0000 0x040000>;
+ read-only;
+ };
+ tee@200000 {
+ reg = <0x00200000 0x440000>;
+ read-only;
+ };
+ uboot@640000 {
+ reg = <0x00640000 0x100000>;
+ read-only;
+ };
+ dtb@740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user@1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
};
};
};
@@ -468,7 +524,10 @@
bus-width = <8>;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
+ no-sd;
+ no-sdio;
non-removable;
+ full-pwr-cycle-in-suspend;
status = "okay";
};
diff --git a/configs/r8a77990_ebisu_defconfig b/configs/r8a77990_ebisu_defconfig
index 00337e07ee..ecc797a1b7 100644
--- a/configs/r8a77990_ebisu_defconfig
+++ b/configs/r8a77990_ebisu_defconfig
@@ -56,7 +56,7 @@ CONFIG_OF_REMOVE_PROPS="dmas dma-names interrupt-parent interrupts interrupts-ex
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_MMC_ENV_DEV=2
+CONFIG_SYS_MMC_ENV_DEV=0
CONFIG_SYS_MMC_ENV_PART=2
CONFIG_VERSION_VARIABLE=y
CONFIG_REGMAP=y
diff --git a/configs/rcar3_ulcb_defconfig b/configs/rcar3_ulcb_defconfig
index 1e964880f6..31a79ee7e2 100644
--- a/configs/rcar3_ulcb_defconfig
+++ b/configs/rcar3_ulcb_defconfig
@@ -58,7 +58,7 @@ CONFIG_OF_REMOVE_PROPS="dmas dma-names interrupt-parent interrupts interrupts-ex
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_SYS_MMC_ENV_DEV=0
CONFIG_SYS_MMC_ENV_PART=2
CONFIG_VERSION_VARIABLE=y
CONFIG_REGMAP=y
diff --git a/drivers/clk/clk_versaclock.c b/drivers/clk/clk_versaclock.c
index 26c014cc4f..699df3cf3e 100644
--- a/drivers/clk/clk_versaclock.c
+++ b/drivers/clk/clk_versaclock.c
@@ -17,7 +17,7 @@
#include <linux/kernel.h>
#include <linux/math64.h>
-#include <dt-bindings/clk/versaclock.h>
+#include <dt-bindings/clock/versaclock.h>
/* VersaClock5 registers */
#define VC5_OTP_CONTROL 0x00
diff --git a/include/dt-bindings/clk/versaclock.h b/include/dt-bindings/clock/versaclock.h
index c6a6a09465..c6a6a09465 100644
--- a/include/dt-bindings/clk/versaclock.h
+++ b/include/dt-bindings/clock/versaclock.h