summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/rs600.c
AgeCommit message (Collapse)AuthorFilesLines
2014-11-21drm/radeon: make sure mode init is complete in bandwidth_updateAlex Deucher1-0/+3
commit 8efe82ca908400785253c8f0dfcf301e6bd93488 upstream. The power management code calls into the display code for certain things. If certain power management sysfs attributes are called before the driver has finished initializing all of the hardware we can run into problems with uninitialized modesetting state. Add a check to make sure modesetting init has completed to the bandwidth update callbacks to fix this. Can be triggered by the tlp and laptop start up scripts depending on the timing. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=83611 https://bugs.freedesktop.org/show_bug.cgi?id=85771 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17drm/radeon: stop poisoning the GART TLBChristian König1-2/+4
commit 0986c1a55ca64b44ee126a2f719a6e9f28cbe0ed upstream. When we set the valid bit on invalid GART entries they are loaded into the TLB when an adjacent entry is loaded. This poisons the TLB with invalid entries which are sometimes not correctly removed on TLB flush. For stable inclusion the patch probably needs to be modified a bit. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06drm/radeon: resume old pm lateAlex Deucher1-2/+0
Moving the pm resume up in the init order to fix dpm seems to have regressed somes cases with the old pm code. Move it back to late resume. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/pm: move pm handling into the asic specific codeAlex Deucher1-0/+7
We need more control over the ordering of dpm init with respect to the rest of the asic. Specifically, the SMC has to be initialized before the rlc and cg/pg. The pm code currently initializes late in the driver, but we need it to happen much earlier so move pm handling into the asic specific callbacks. This makes dpm more reliable and makes clockgating work properly on CIK parts and should help on SI parts as well. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01drm/radeon: add a connector property for ditherAlex Deucher1-4/+7
Allows you to enable dither in the display hardware when the monitor supports lower a lower bpc than the current framebuffer format. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01drm/radeon: Add support for programming the FMT blocksAlex Deucher1-0/+61
The FMT blocks control how data is sent from the backend of the display pipe to to monitor. Proper set up of the FMT blocks are required for 30bpp formats. Additionally, dithering can be enabled on for better display with 18 and 24bpp displays. The exception is LVDS/eDP which atom takes care of in the SelectCRTC_Source table. For now just enable truncation until we test dithering more. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-09-11drm/radeon: add spinlocks for indirect register accesssAlex Deucher1-1/+11
This adds spinlocks to protect access to other indirect register apertures. These indirect spaces are used pretty infrequently and we haven't had an reported problems, but better safe than sorry. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-03radeon: Fix system hang issue when using KMS with older cardsAdis Hamzić1-3/+6
The current radeon driver initialization routines, when using KMS, are written so that the IRQ installation routine is called before initializing the WB buffer and the CP rings. With some ASICs, though, the IRQ routine tries to access the GFX_INDEX ring causing a call to RREG32 with the value of -1 in radeon_fence_read. This, in turn causes the system to completely hang with some cards, requiring a hard reset. A call stack that can cause such a hang looks like this (using rv515 ASIC for the example here): * rv515_init (rv515.c) * radeon_irq_kms_init (radeon_irq_kms.c) * drm_irq_install (drm_irq.c) * radeon_driver_irq_preinstall_kms (radeon_irq_kms.c) * rs600_irq_process (rs600.c) * radeon_fence_process - due to SW interrupt (radeon_fence.c) * radeon_fence_read (radeon_fence.c) * hang due to RREG32(-1) The patch moves the IRQ installation to the card startup routine, after the ring has been initialized, but before the IRQ has been set. This fixes the issue, but requires a check to see if the IRQ is already installed, as is the case in the system resume codepath. I have tested the patch on three machines using the rv515, the rv770 and the evergreen ASIC. They worked without issues. This seems to be a known issue and has been reported on several bug tracking sites by various distributions (see links below). Most of reports recommend booting the system with KMS disabled and then enabling KMS by reloading the radeon module. For some reason, this was indeed a usable workaround, however, UMS is now deprecated and disabled by default. Bug reports: https://bugzilla.redhat.com/show_bug.cgi?id=845745 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/561789 https://bbs.archlinux.org/viewtopic.php?id=156964 Signed-off-by: Adis Hamzić <adis@hamzadis.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-04-22drm/radeon: update wait_for_vblank for r5xx-r7xxAlex Deucher1-8/+44
Properly wait for the next vblank region. The previous code didn't always wait long enough depending on the timing. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-10-03Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-30/+19
Pull drm merge (part 1) from Dave Airlie: "So first of all my tree and uapi stuff has a conflict mess, its my fault as the nouveau stuff didn't hit -next as were trying to rebase regressions out of it before we merged. Highlights: - SH mobile modesetting driver and associated helpers - some DRM core documentation - i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write combined pte writing, ilk rc6 support, - nouveau: major driver rework into a hw core driver, makes features like SLI a lot saner to implement, - psb: add eDP/DP support for Cedarview - radeon: 2 layer page tables, async VM pte updates, better PLL selection for > 2 screens, better ACPI interactions The rest is general grab bag of fixes. So why part 1? well I have the exynos pull req which came in a bit late but was waiting for me to do something they shouldn't have and it looks fairly safe, and David Howells has some more header cleanups he'd like me to pull, that seem like a good idea, but I'd like to get this merge out of the way so -next dosen't get blocked." Tons of conflicts mostly due to silly include line changes, but mostly mindless. A few other small semantic conflicts too, noted from Dave's pre-merged branch. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits) drm/nv98/crypt: fix fuc build with latest envyas drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering drm/nv41/vm: fix and enable use of "real" pciegart drm/nv44/vm: fix and enable use of "real" pciegart drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie drm/nouveau: store supported dma mask in vmmgr drm/nvc0/ibus: initial implementation of subdev drm/nouveau/therm: add support for fan-control modes drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules drm/nouveau/therm: calculate the pwm divisor on nv50+ drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster drm/nouveau/therm: move thermal-related functions to the therm subdev drm/nouveau/bios: parse the pwm divisor from the perf table drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices drm/nouveau/therm: rework thermal table parsing drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table drm/nouveau: fix pm initialization order drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it drm/nouveau: log channel debug/error messages from client object rather than drm client drm/nouveau: have drm debugging macros build on top of core macros ...
2012-10-02UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/David Howells1-1/+1
Convert #include "..." to #include <path/...> in drivers/gpu/. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-09-20drm/radeon: Mark all possible functions / structs as staticLauri Kasanen1-7/+7
Let's allow GCC to optimize better. This exposed some five unused functions, but this patch doesn't remove them. Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-09-20drm/radeon: remove gui_idle interrupt infrastructureAlex Deucher1-19/+0
It was only used for dynpm, but has been replaced with a better implementation using fences. Remove it. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-09-20drm/radeon/r5xx-r7xx: don't use radeon_crtc for vblank callback (v2)Alex Deucher1-4/+12
This might be called before we've allocated the radeon_crtcs v2: fix typo in array size Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-07-17drm/radeon: move radeon_ib_ring_tests out of chipset codeChristian König1-4/+0
Making it easier to control when it is executed. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-07-17drm/radeon: remove ip_pool start/suspendChristian König1-11/+6
The IB pool is in gart memory, so it is completely superfluous to unpin / repin it on suspend / resume. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-06-21drm/radeon: replace pflip and sw_int counters with atomicsChristian Koenig1-5/+5
So we can skip the locking. Also renames sw_int to ring_int, cause that better matches its purpose. Signed-off-by: Christian Koenig <christian.koenig@amd.com>
2012-06-21drm/radeon: apply Murphy's law to the kms irq code v3Christian Koenig1-7/+6
1. It is really dangerous to have more than one spinlock protecting the same information. 2. radeon_irq_set sometimes wasn't called with lock protection, so it can happen that more than one CPU would tamper with the irq regs at the same time. 3. The pm.gui_idle variable was assuming that the 3D engine wasn't becoming idle between testing the register and setting the variable. So just remove it and test the register directly. v2: Also handle the hpd irq code the same way. v3: Rename hpd parameter for clarification. Signed-off-by: Christian Koenig <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-06-05drm/radeon: make audio_init consistent across asicsAlex Deucher1-6/+6
Call it in the asic startup callback on all asics. Previously r600 and rv770 called it in the startup and resume callbacks while all the other asics called it in the startup callback. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: use central function for IB testingChristian König1-5/+2
Removing all the different error messages and having just one standard behaviour over all chipset generations. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: replace gpu_lockup with ring->ready flagChristian König1-1/+0
It makes no sense at all to have more than one flag. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-24drm/radeon/kms: fix up audio interrupt handlingAlex Deucher1-2/+38
- add support for rs6xx - add support for DCE4/5 - fixup 6xx/7xx Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Merge tag 'v3.3-rc7' into drm-core-nextDave Airlie1-4/+8
Merge the fixes so far into core-next, needed to test intel driver. Conflicts: drivers/gpu/drm/i915/intel_ringbuffer.c
2012-02-29drm/radeon/kms: move clock/pcie setting callbacks into pm structAlex Deucher1-1/+1
tidy up radeon_asic struct. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König<christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29drm/radeon/kms: make ring_start, ring_test, and ib_test per ringAlex Deucher1-1/+1
Each ring type may need a different variant. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König<christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-27drm/radeon/kms: add wait_for_vblank asic callbackAlex Deucher1-0/+19
Required for future functionality. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-22drm/radeon/kms: properly set accel working flag and bailout when falseJerome Glisse1-1/+7
If accel is not working many subsystem such as the ib pool might not be initialized properly that can lead to segfault inside kernel when cs ioctl is call with non working acceleration. To avoid this make sure the accel working flag is false when an error in GPU startup happen and return EBUSY from cs ioctl if accel is not working. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-14drm/radeon/kms: fix MSI re-arm on rv370+Alex Deucher1-3/+1
MSI_REARM_EN register is a write only trigger register. There is no need RMW when re-arming. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=41668 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13radeon: Call pci_clear_master() instead of open-coding it.Michel Dänzer1-11/+2
Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-06radeon: Fix disabling PCI bus mastering on big endian hosts.Michel Dänzer1-2/+2
It would previously write basically random bits to PCI configuration space... Not very surprising that the GPU tended to stop responding completely. The resulting MCE even froze the whole machine sometimes. Now resetting the GPU after a lockup has at least a fighting chance of succeeding. Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm/radeon: introduce a sub allocator and convert ib pool to it v4Jerome Glisse1-4/+20
Somewhat specializaed sub-allocator designed to perform sub-allocation for command buffer not only for current cs ioctl but for future command submission ioctl as well. Patch also convert current ib pool to use the sub allocator. Idea is that ib poll buffer can be share with other command buffer submission not having 64K granularity. v2 Harmonize pool handling and add suspend/resume callback to pin/unpin sa bo (tested on rv280, rv370, r420, rv515, rv610, rv710, redwood, cayman, rs480, rs690, rs880) v3 Simplify allocator v4 Fix radeon_ib_get error path to properly free fence Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm/radeon/kms: add support for per-ring fence interruptsAlex Deucher1-1/+1
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm/radeon: precompute fence cpu/gpu addr once v3Jerome Glisse1-1/+7
Add a start fence driver helper function which will be call once for each ring and will compute cpu/gpu addr for fence depending on wether to use wb buffer or scratch reg. This patch replace initialize fence driver separately which was broken in regard of GPU lockup. The fence list for created, emited, signaled must be initialize once and only from the asic init callback not from the startup call back which is call from the gpu reset. v2: With this in place we no longer need to know the number of rings in fence_driver_init, also writing to the scratch reg before knowing its offset is a bad idea. v3: rebase on top of change to previous patch in the serie Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm/radeon/kms: add support for multiple fence queues v2Alex Deucher1-2/+2
For supporting multiple CP ring buffers, async DMA engines and UVD. We still need a way to synchronize between engines. v2 initialize unused fence driver ring to avoid issue in suspend/unload Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-01drm/radeon/kms: add some loop timeouts in pageflip codeAlex Deucher1-1/+6
Avoid infinite loops waiting for surface updates if a GPU reset happens while waiting for a page flip. See: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Tested-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-04drm/radeon/kms: consolidate GART code, fix segfault after GPU lockup V2Jerome Glisse1-12/+4
After GPU lockup VRAM gart table is unpinned and thus its pointer becomes unvalid. This patch move the unpin code to a common helper function and set pointer to NULL so that page update code can check if it should update GPU page table or not. That way bo still bound to GART can be unbound (pci_unmap_page for all there page) properly while there is no need to update the GPU page table. V2 move the test for null gart out of the loop, small optimization Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-03drm/radeon/kms: set HPD polarity in hpd_init()Alex Deucher1-0/+1
Polarity needs to be set accordingly to connector status (connected or disconnected). Set it up in hpd_init() so first hotplug works reliably no matter what is the initial set of connector. hpd_init() also covers resume so HPD will work correctly after resume as well. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jerome Glisse <j.glisse@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-06drm/radeon: Print gart initialization details on all chipsetsTormod Volden1-0/+3
This was previously done for r300 only. Use %016llX instead of %08X for printing the table address. Also fix typos in gart warning messages. Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-26Merge branch 'drm-core-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (135 commits) drm/radeon/kms: fix DP training for DPEncoderService revision bigger than 1.1 drm/radeon/kms: add missing vddci setting on NI+ drm/radeon: Add a rmb() in IH processing drm/radeon: ATOM Endian fix for atombios_crtc_program_pll() drm/radeon: Fix the definition of RADEON_BUF_SWAP_32BIT drm/radeon: Do an MMIO read on interrupts when not uisng MSIs drm/radeon: Writeback endian fixes drm/radeon: Remove a bunch of useless _iomem casts drm/gem: add support for private objects DRM: clean up and document parsing of video= parameter DRM: Radeon: Fix section mismatch. drm: really make debug levels match in edid failure code drm/radeon/kms: fix i2c map for rv250/280 drm/nouveau/gr: disable fifo access and idle before suspend ctx unload drm/nouveau: pass flag to engine fini() method on suspend drm/nouveau: replace nv04_graph_fifo_access() use with direct reg bashing drm/nv40/gr: rewrite/split context takedown functions drm/nouveau: detect disabled device in irq handler and return IRQ_NONE drm/nouveau: ignore connector type when deciding digital/analog on DVI-I drm/nouveau: Add a quirk for Gigabyte NX86T ...
2011-07-25drm/radeon: Remove a bunch of useless _iomem castsBenjamin Herrenschmidt1-1/+1
Just defining rdev->rmmio properly in the first place should do the trick. In some cases, the cast were also complete dups as the original variable was already of the right type. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-12drm/radeon/kms: use correct BUS_CNTL reg on rs600Alex Deucher1-3/+3
BUS_CNTL is at 0x30 on rs600, not 0x4c. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13drm/radeon/kms: add voltage type to atom set voltage functionAlex Deucher1-1/+1
This is needed for setting voltages other than vddc. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-04drm/radeon/kms: pageflipping cleanup for avivo+Alex Deucher1-11/+0
Avoid touching the flip setup regs while acceleration is running. Set them at modeset rather than during pageflip. Touching these regs while acceleration is active caused hangs on pre-avivo chips. These chips do not seem to be affected, but better safe than sorry, plus it avoids repeatedly reprogramming the regs every flip. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-18Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits) doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore Update cpuset info & webiste for cgroups dcdbas: force SMI to happen when expected arch/arm/Kconfig: remove one to many l's in the word. asm-generic/user.h: Fix spelling in comment drm: fix printk typo 'sracth' Remove one to many n's in a word Documentation/filesystems/romfs.txt: fixing link to genromfs drivers:scsi Change printk typo initate -> initiate serial, pch uart: Remove duplicate inclusion of linux/pci.h header fs/eventpoll.c: fix spelling mm: Fix out-of-date comments which refers non-existent functions drm: Fix printk typo 'failled' coh901318.c: Change initate to initiate. mbox-db5500.c Change initate to initiate. edac: correct i82975x error-info reported edac: correct i82975x mci initialisation edac: correct commented info fs: update comments to point correct document target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c ... Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-14drm/radeon: fix problem with changing active VRAM size. (v2)Dave Airlie1-1/+0
So we used to use lpfn directly to restrict VRAM when we couldn't access the unmappable area, however this was removed in 93225b0d7bc030f4a93165347a65893685822d70 as it also restricted the gtt placements. However it was only later noticed that this broke on some hw. This removes the active_vram_size, and just explicitly sets it when it changes, TTM/drm_mm will always use the real_vram_size, and the active vram size will change the TTM size used for lpfn setting. We should re-work the fpfn/lpfn to per-placement at some point I suspect, but that is too late for this kernel. Hopefully this addresses: https://bugs.freedesktop.org/show_bug.cgi?id=35254 v2: fix reported useful VRAM size to userspace to be correct. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-17drm: Fix printk typo 'failled'Paul Bolle1-2/+2
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-17drm/radeon/kms: balance asic_reset functionsAlex Deucher1-8/+8
First, we were calling mc_stop() at the top of the function which turns off all MC (memory controller) clients, then checking if the GPU is idle. If it was idle we returned without re-enabling the MC clients which would lead to a blank screen, etc. This patch checks if the GPU is idle before calling mc_stop(). Second, if the reset failed, we were returning without re-enabling the MC clients. This patch re-enables the MC clients before returning regardless of whether the reset was successful or not. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06drm/radeon: use system_wq instead of dev_priv->wqTejun Heo1-1/+1
With cmwq, there's no reason for radeon to use a dedicated workqueue. Drop dev_priv->wq and use system_wq instead. Because radeon_driver_irq_uninstall_kms() may be called from unsleepable context, the work items can't be flushed from there. Instead, init and flush from radeon_irq_kms_init/fini(). While at it, simplify canceling/flushing of rdev->pm.dynpm_idle_work. Always initialize and sync cancel instead of being unnecessarily smart about it. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Alex Deucher <alexdeucher@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22drm/kms/radeon: Reorder vblank and pageflip interrupt handling.Mario Kleiner1-4/+4
In the vblank irq handler, calls to actual vblank handling, or at least drm_handle_vblank(), need to happen before calls to radeon_crtc_handle_flip(). Reason: The high precision pageflip timestamping and some other pageflip optimizations will need the updated vblank count and timestamps for the current vblank interval. These are calculated in drm_handle_vblank(), therefore it must go first. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22drm/radeon/kms: add pageflip ioctl support (v3)Alex Deucher1-29/+87
This adds support for dri2 pageflipping. v2: precision updates from Mario Kleiner. v3: Multihead fixes from Mario Kleiner; missing crtc offset add note about update pending bit on pre-avivo chips Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>