diff options
Diffstat (limited to 'drivers/ide/pci/via82cxxx.c')
-rw-r--r-- | drivers/ide/pci/via82cxxx.c | 139 |
1 files changed, 77 insertions, 62 deletions
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 09dc4803ef9d..454d2bf62dce 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -35,6 +35,8 @@ #include <asm/processor.h> #endif +#define DRV_NAME "via82cxxx" + #define VIA_IDE_ENABLE 0x40 #define VIA_IDE_CONFIG 0x41 #define VIA_FIFO_CONFIG 0x43 @@ -113,7 +115,8 @@ struct via82cxxx_dev static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) { struct pci_dev *dev = to_pci_dev(hwif->dev); - struct via82cxxx_dev *vdev = pci_get_drvdata(dev); + struct ide_host *host = pci_get_drvdata(dev); + struct via82cxxx_dev *vdev = host->host_priv; u8 t; if (~vdev->via_config->flags & VIA_BAD_AST) { @@ -153,7 +156,8 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed) ide_hwif_t *hwif = drive->hwif; ide_drive_t *peer = hwif->drives + (~drive->dn & 1); struct pci_dev *dev = to_pci_dev(hwif->dev); - struct via82cxxx_dev *vdev = pci_get_drvdata(dev); + struct ide_host *host = pci_get_drvdata(dev); + struct via82cxxx_dev *vdev = host->host_priv; struct ide_timing t, p; unsigned int T, UT; @@ -258,37 +262,19 @@ static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u) /** * init_chipset_via82cxxx - initialization handler * @dev: PCI device - * @name: Name of interface * * The initialization callback. Here we determine the IDE chip type * and initialize its drive independent registers. */ -static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name) +static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev) { - struct pci_dev *isa = NULL; - struct via82cxxx_dev *vdev; - struct via_isa_bridge *via_config; + struct ide_host *host = pci_get_drvdata(dev); + struct via82cxxx_dev *vdev = host->host_priv; + struct via_isa_bridge *via_config = vdev->via_config; u8 t, v; u32 u; - vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); - if (!vdev) { - printk(KERN_ERR "VP_IDE: out of memory :(\n"); - return -ENOMEM; - } - pci_set_drvdata(dev, vdev); - - /* - * Find the ISA bridge to see how good the IDE is. - */ - vdev->via_config = via_config = via_config_find(&isa); - - /* We checked this earlier so if it fails here deeep badness - is involved */ - - BUG_ON(!via_config->id); - /* * Detect cable and configure Clk66 */ @@ -334,39 +320,6 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const pci_write_config_byte(dev, VIA_FIFO_CONFIG, t); - /* - * Determine system bus clock. - */ - - via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; - - switch (via_clock) { - case 33000: via_clock = 33333; break; - case 37000: via_clock = 37500; break; - case 41000: via_clock = 41666; break; - } - - if (via_clock < 20000 || via_clock > 50000) { - printk(KERN_WARNING "VP_IDE: User given PCI clock speed " - "impossible (%d), using 33 MHz instead.\n", via_clock); - printk(KERN_WARNING "VP_IDE: Use ide0=ata66 if you want " - "to assume 80-wire cable.\n"); - via_clock = 33333; - } - - /* - * Print the boot message. - */ - - printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s " - "controller on pci%s\n", - via_config->name, isa->revision, - via_config->udma_mask ? "U" : "MW", - via_dma[via_config->udma_mask ? - (fls(via_config->udma_mask) - 1) : 0], - pci_name(dev)); - - pci_dev_put(isa); return 0; } @@ -402,7 +355,8 @@ static int via_cable_override(struct pci_dev *pdev) static u8 __devinit via82cxxx_cable_detect(ide_hwif_t *hwif) { struct pci_dev *pdev = to_pci_dev(hwif->dev); - struct via82cxxx_dev *vdev = pci_get_drvdata(pdev); + struct ide_host *host = pci_get_drvdata(pdev); + struct via82cxxx_dev *vdev = host->host_priv; if (via_cable_override(pdev)) return ATA_CBL_PATA40_SHORT; @@ -420,7 +374,7 @@ static const struct ide_port_ops via_port_ops = { }; static const struct ide_port_info via82cxxx_chipset __devinitdata = { - .name = "VP_IDE", + .name = DRV_NAME, .init_chipset = init_chipset_via82cxxx, .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, .port_ops = &via_port_ops, @@ -436,6 +390,8 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i { struct pci_dev *isa = NULL; struct via_isa_bridge *via_config; + struct via82cxxx_dev *vdev; + int rc; u8 idx = id->driver_data; struct ide_port_info d; @@ -445,12 +401,42 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i * Find the ISA bridge and check we know what it is. */ via_config = via_config_find(&isa); - pci_dev_put(isa); if (!via_config->id) { - printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n"); + printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n", + pci_name(dev)); return -ENODEV; } + /* + * Print the boot message. + */ + printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n", + pci_name(dev), via_config->name, isa->revision, + via_config->udma_mask ? "U" : "MW", + via_dma[via_config->udma_mask ? + (fls(via_config->udma_mask) - 1) : 0]); + + pci_dev_put(isa); + + /* + * Determine system bus clock. + */ + via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; + + switch (via_clock) { + case 33000: via_clock = 33333; break; + case 37000: via_clock = 37500; break; + case 41000: via_clock = 41666; break; + } + + if (via_clock < 20000 || via_clock > 50000) { + printk(KERN_WARNING DRV_NAME ": User given PCI clock speed " + "impossible (%d), using 33 MHz instead.\n", via_clock); + printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want " + "to assume 80-wire cable.\n"); + via_clock = 33333; + } + if (idx == 0) d.host_flags |= IDE_HFLAG_NO_AUTODMA; else @@ -466,7 +452,29 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i d.udma_mask = via_config->udma_mask; - return ide_setup_pci_device(dev, &d); + vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); + if (!vdev) { + printk(KERN_ERR DRV_NAME " %s: out of memory :(\n", + pci_name(dev)); + return -ENOMEM; + } + + vdev->via_config = via_config; + + rc = ide_pci_init_one(dev, &d, vdev); + if (rc) + kfree(vdev); + + return rc; +} + +static void __devexit via_remove(struct pci_dev *dev) +{ + struct ide_host *host = pci_get_drvdata(dev); + struct via82cxxx_dev *vdev = host->host_priv; + + ide_pci_remove(dev); + kfree(vdev); } static const struct pci_device_id via_pci_tbl[] = { @@ -483,6 +491,7 @@ static struct pci_driver driver = { .name = "VIA_IDE", .id_table = via_pci_tbl, .probe = via_init_one, + .remove = via_remove, }; static int __init via_ide_init(void) @@ -490,7 +499,13 @@ static int __init via_ide_init(void) return ide_pci_register_driver(&driver); } +static void __exit via_ide_exit(void) +{ + pci_unregister_driver(&driver); +} + module_init(via_ide_init); +module_exit(via_ide_exit); MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick"); MODULE_DESCRIPTION("PCI driver module for VIA IDE"); |