diff options
Diffstat (limited to 'Documentation')
33 files changed, 1151 insertions, 68 deletions
diff --git a/Documentation/Changes b/Documentation/Changes index b17580885273..07c75d18154e 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -196,13 +196,6 @@ chmod 0644 /dev/cpu/microcode as root before you can use this. You'll probably also want to get the user-space microcode_ctl utility to use with this. -Powertweak ----------- - -If you are running v0.1.17 or earlier, you should upgrade to -version v0.99.0 or higher. Running old versions may cause problems -with programs using shared memory. - udev ---- udev is a userspace application for populating /dev dynamically with @@ -366,10 +359,6 @@ Intel P6 microcode ------------------ o <http://www.urbanmyth.org/microcode/> -Powertweak ----------- -o <http://powertweak.sourceforge.net/> - udev ---- o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html> diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 6c9d9d37c83a..f5170082bdb3 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -58,7 +58,7 @@ </sect1> <sect1><title>Wait queues and Wake events</title> !Iinclude/linux/wait.h -!Ekernel/wait.c +!Ekernel/sched/wait.c </sect1> <sect1><title>High-resolution timers</title> !Iinclude/linux/ktime.h diff --git a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml index e287c8fc803b..4165e7bfa4ff 100644 --- a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml @@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active format. For the single-planar API, applications must set <structfield> plane </structfield> to zero. Additional flags may be posted in the <structfield> flags </structfield> field. Refer to a manual for open() for details. -Currently only O_CLOEXEC is supported. All other fields must be set to zero. +Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported. All +other fields must be set to zero. In the case of multi-planar API, every plane is exported separately using multiple <constant> VIDIOC_EXPBUF </constant> calls. </para> @@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. </entry> <entry>__u32</entry> <entry><structfield>flags</structfield></entry> <entry>Flags for the newly created file, currently only <constant> -O_CLOEXEC </constant> is supported, refer to the manual of open() for more -details.</entry> +O_CLOEXEC </constant>, <constant>O_RDONLY</constant>, <constant>O_WRONLY +</constant>, and <constant>O_RDWR</constant> are supported, refer to the manual +of open() for more details.</entry> </row> <row> <entry>__s32</entry> diff --git a/Documentation/assoc_array.txt b/Documentation/assoc_array.txt index f4faec0f66e4..2f2c6cdd73c0 100644 --- a/Documentation/assoc_array.txt +++ b/Documentation/assoc_array.txt @@ -164,10 +164,10 @@ This points to a number of methods, all of which need to be provided: (4) Diff the index keys of two objects. - int (*diff_objects)(const void *a, const void *b); + int (*diff_objects)(const void *object, const void *index_key); - Return the bit position at which the index keys of two objects differ or - -1 if they are the same. + Return the bit position at which the index key of the specified object + differs from the given index key or -1 if they are the same. (5) Free an object. diff --git a/Documentation/block/null_blk.txt b/Documentation/block/null_blk.txt new file mode 100644 index 000000000000..b2830b435895 --- /dev/null +++ b/Documentation/block/null_blk.txt @@ -0,0 +1,72 @@ +Null block device driver +================================================================================ + +I. Overview + +The null block device (/dev/nullb*) is used for benchmarking the various +block-layer implementations. It emulates a block device of X gigabytes in size. +The following instances are possible: + + Single-queue block-layer + - Request-based. + - Single submission queue per device. + - Implements IO scheduling algorithms (CFQ, Deadline, noop). + Multi-queue block-layer + - Request-based. + - Configurable submission queues per device. + No block-layer (Known as bio-based) + - Bio-based. IO requests are submitted directly to the device driver. + - Directly accepts bio data structure and returns them. + +All of them have a completion queue for each core in the system. + +II. Module parameters applicable for all instances: + +queue_mode=[0-2]: Default: 2-Multi-queue + Selects which block-layer the module should instantiate with. + + 0: Bio-based. + 1: Single-queue. + 2: Multi-queue. + +home_node=[0--nr_nodes]: Default: NUMA_NO_NODE + Selects what CPU node the data structures are allocated from. + +gb=[Size in GB]: Default: 250GB + The size of the device reported to the system. + +bs=[Block size (in bytes)]: Default: 512 bytes + The block size reported to the system. + +nr_devices=[Number of devices]: Default: 2 + Number of block devices instantiated. They are instantiated as /dev/nullb0, + etc. + +irq_mode=[0-2]: Default: 1-Soft-irq + The completion mode used for completing IOs to the block-layer. + + 0: None. + 1: Soft-irq. Uses IPI to complete IOs across CPU nodes. Simulates the overhead + when IOs are issued from another CPU node than the home the device is + connected to. + 2: Timer: Waits a specific period (completion_nsec) for each IO before + completion. + +completion_nsec=[ns]: Default: 10.000ns + Combined with irq_mode=2 (timer). The time each completion event must wait. + +submit_queues=[0..nr_cpus]: + The number of submission queues attached to the device driver. If unset, it + defaults to 1 on single-queue and bio-based instances. For multi-queue, + it is ignored when use_per_node_hctx module parameter is 1. + +hw_queue_depth=[0..qdepth]: Default: 64 + The hardware queue depth of the device. + +III: Multi-queue specific parameters + +use_per_node_hctx=[0/1]: Default: 0 + 0: The number of submit queues are set to the value of the submit_queues + parameter. + 1: The multi-queue block layer is instantiated with a hardware dispatch + queue for each CPU node in the system. diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt index 274752f8bdf9..719320b5ed3f 100644 --- a/Documentation/device-mapper/cache.txt +++ b/Documentation/device-mapper/cache.txt @@ -266,10 +266,12 @@ E.g. Invalidation is removing an entry from the cache without writing it back. Cache blocks can be invalidated via the invalidate_cblocks message, which takes an arbitrary number of cblock ranges. Each cblock -must be expressed as a decimal value, in the future a variant message -that takes cblock ranges expressed in hexidecimal may be needed to -better support efficient invalidation of larger caches. The cache must -be in passthrough mode when invalidate_cblocks is used. +range's end value is "one past the end", meaning 5-10 expresses a range +of values from 5 to 9. Each cblock must be expressed as a decimal +value, in the future a variant message that takes cblock ranges +expressed in hexidecimal may be needed to better support efficient +invalidation of larger caches. The cache must be in passthrough mode +when invalidate_cblocks is used. invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]* diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt index 1a5a42ce21bb..83f405bde138 100644 --- a/Documentation/devicetree/bindings/arm/omap/mpu.txt +++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt @@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM. Required properties: - compatible : Should be "ti,omap3-mpu" for OMAP3 Should be "ti,omap4-mpu" for OMAP4 + Should be "ti,omap5-mpu" for OMAP5 - ti,hwmods: "mpu" Examples: +- For an OMAP5 SMP system: + +mpu { + compatible = "ti,omap5-mpu"; + ti,hwmods = "mpu" +}; + - For an OMAP4 SMP system: mpu { diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt index 343781b9f246..3e1e498fea96 100644 --- a/Documentation/devicetree/bindings/arm/pmu.txt +++ b/Documentation/devicetree/bindings/arm/pmu.txt @@ -7,6 +7,7 @@ representation in the device tree should be done as under:- Required properties: - compatible : should be one of + "arm,armv8-pmuv3" "arm,cortex-a15-pmu" "arm,cortex-a9-pmu" "arm,cortex-a8-pmu" diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt index 47ada1dff216..5d49f2b37f68 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt @@ -49,7 +49,7 @@ adc@12D10000 { /* NTC thermistor is a hwmon device */ ncp15wb473@0 { compatible = "ntc,ncp15wb473"; - pullup-uV = <1800000>; + pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 4>; diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt index c6bf8a6c8f52..a2ac2d9ac71a 100644 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -6,7 +6,7 @@ SoC's in the Exynos4 family. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC. - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC. diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt index 24765c146e31..46f5c791ea0d 100644 --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC. - reg: physical base address of the controller and length of memory mapped diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt index 32aa34ecad36..458f34789e5d 100644 --- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC. - reg: physical base address of the controller and length of memory mapped diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt index 4499e9966bc9..9955dc9c7d96 100644 --- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC. Required Properties: -- comptible: should be "samsung,exynos5440-clock". +- compatible: should be "samsung,exynos5440-clock". - reg: physical base address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt index b0019eb5330e..798cfc9d3839 100644 --- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt +++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt @@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on Every GPIO controller node must have #gpio-cells property defined, this information will be used to translate gpio-specifiers. +See bindings/gpio/gpio.txt for details of how to specify GPIO +information for devices. + +The GPIO module usually is connected to the SoC's internal interrupt +controller, see bindings/interrupt-controller/interrupts.txt (the +interrupt client nodes section) for details how to specify this GPIO +module's interrupt. + +The GPIO module may serve as another interrupt controller (cascaded to +the SoC's internal interrupt controller). See the interrupt controller +nodes section in bindings/interrupt-controller/interrupts.txt for +details. Required properties: -- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for - 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - - interrupts : Interrupt mapping for GPIO IRQ. - - interrupt-parent : Phandle for the interrupt controller that - services interrupts for this device. -- gpio-controller : Marks the port as GPIO controller. +- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio" + for 83xx, "fsl,mpc8572-gpio" for 85xx, or + "fsl,mpc8610-gpio" for 86xx. +- #gpio-cells: Should be two. The first cell is the pin number + and the second cell is used to specify optional + parameters (currently unused). +- interrupt-parent: Phandle for the interrupt controller that + services interrupts for this device. +- interrupts: Interrupt mapping for GPIO IRQ. +- gpio-controller: Marks the port as GPIO controller. + +Optional properties: +- interrupt-controller: Empty boolean property which marks the GPIO + module as an IRQ controller. +- #interrupt-cells: Should be two. Defines the number of integer + cells required to specify an interrupt within + this interrupt controller. The first cell + defines the pin number, the second cell + defines additional flags (trigger type, + trigger polarity). Note that the available + set of trigger conditions supported by the + GPIO module depends on the actual SoC. Example of gpio-controller nodes for a MPC8347 SoC: @@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC: #gpio-cells = <2>; compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; reg = <0xc00 0x100>; - interrupts = <74 0x8>; interrupt-parent = <&ipic>; + interrupts = <74 0x8>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; }; gpio2: gpio-controller@d00 { #gpio-cells = <2>; compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; reg = <0xd00 0x100>; - interrupts = <75 0x8>; interrupt-parent = <&ipic>; + interrupts = <75 0x8>; gpio-controller; }; -See booting-without-of.txt for details of how to specify GPIO -information for devices. - -To use GPIO pins as interrupt sources for peripherals, specify the -GPIO controller as the interrupt parent and define GPIO number + -trigger mode using the interrupts property, which is defined like -this: - -interrupts = <number trigger>, where: - - number: GPIO pin (0..31) - - trigger: trigger mode: - 2 = trigger on falling edge - 3 = trigger on both edges - -Example of device using this is: +Example of a peripheral using the GPIO module as an IRQ controller: funkyfpga@0 { compatible = "funky-fpga"; ... - interrupts = <4 3>; interrupt-parent = <&gpio1>; + interrupts = <4 3>; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt index 56564aa4b444..7e49839d4124 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-omap.txt @@ -1,7 +1,8 @@ I2C for OMAP platforms Required properties : -- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c" +- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c" + or "ti,omap4-i2c" - ti,hwmods : Must be "i2c<n>", n being the instance number (1-based) - #address-cells = <1>; - #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt new file mode 100644 index 000000000000..8de579969763 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt @@ -0,0 +1,54 @@ +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi<n>", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi<n>", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt index 48b259e29e87..bad381faf036 100644 --- a/Documentation/devicetree/bindings/net/davinci_emac.txt +++ b/Documentation/devicetree/bindings/net/davinci_emac.txt @@ -4,7 +4,7 @@ This file provides information, what the device node for the davinci_emac interface contains. Required properties: -- compatible: "ti,davinci-dm6467-emac"; +- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac" - reg: Offset and length of the register set for the device - ti,davinci-ctrl-reg-offset: offset to control register - ti,davinci-ctrl-mod-reg-offset: offset to control module register diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index d53639221403..845ff848d895 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -15,6 +15,7 @@ Optional properties: only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are invalid and 1 millisecond will be used instead. +- phy-supply: regulator that powers the Ethernet PHY. Example: @@ -25,4 +26,5 @@ ethernet@83fec000 { phy-mode = "mii"; phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ local-mac-address = [00 04 9F 01 1B B9]; + phy-supply = <®_fec_supply>; }; diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt index 953049b4248a..5a41a8658daa 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt @@ -8,3 +8,7 @@ Required properties: Optional properties: - phy-device : phandle to Ethernet phy - local-mac-address : Ethernet mac address to use +- reg-io-width : Mask of sizes (in bytes) of the IO accesses that + are supported on the device. Valid value for SMSC LAN91c111 are + 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning + 16-bit access only. diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt deleted file mode 100644 index 6b9e51896693..000000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt +++ /dev/null @@ -1,5 +0,0 @@ -NVIDIA Tegra 2 SPI device - -Required properties: -- compatible : should be "nvidia,tegra20-spi". -- gpios : should specify GPIOs used for chipselect. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ce95ed1c6d3e..edbb8d88c85e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -32,12 +32,14 @@ est ESTeem Wireless Modems fsl Freescale Semiconductor GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. +gmt Global Mixed-mode Technology, Inc. hisilicon Hisilicon Limited. hp Hewlett Packard ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. img Imagination Technologies Ltd. intercontrol Inter Control Group +lg LG Corporation linux Linux-specific binding lsi LSI Corp. (LSI Logic) marvell Marvell Technology Group Ltd. diff --git a/Documentation/gpio/00-INDEX b/Documentation/gpio/00-INDEX new file mode 100644 index 000000000000..1de43ae46ae6 --- /dev/null +++ b/Documentation/gpio/00-INDEX @@ -0,0 +1,14 @@ +00-INDEX + - This file +gpio.txt + - Introduction to GPIOs and their kernel interfaces +consumer.txt + - How to obtain and use GPIOs in a driver +driver.txt + - How to write a GPIO driver +board.txt + - How to assign GPIOs to a consumer device and a function +sysfs.txt + - Information about the GPIO sysfs interface +gpio-legacy.txt + - Historical documentation of the deprecated GPIO integer interface diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt new file mode 100644 index 000000000000..0d03506f2cc5 --- /dev/null +++ b/Documentation/gpio/board.txt @@ -0,0 +1,115 @@ +GPIO Mappings +============= + +This document explains how GPIOs can be assigned to given devices and functions. +Note that it only applies to the new descriptor-based interface. For a +description of the deprecated integer-based GPIO interface please refer to +gpio-legacy.txt (actually, there is no real mapping possible with the old +interface; you just fetch an integer from somewhere and request the +corresponding GPIO. + +Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage +is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in +their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to +describe its hardware layout. Currently, mappings can be defined through device +tree, ACPI, and platform data. + +Device Tree +----------- +GPIOs can easily be mapped to devices and functions in the device tree. The +exact way to do it depends on the GPIO controller providing the GPIOs, see the +device tree bindings for your controller. + +GPIOs mappings are defined in the consumer device's node, in a property named +<function>-gpios, where <function> is the function the driver will request +through gpiod_get(). For example: + + foo_device { + compatible = "acme,foo"; + ... + led-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>, /* red */ + <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */ + <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */ + + power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + +This property will make GPIOs 15, 16 and 17 available to the driver under the +"led" function, and GPIO 1 as the "power" GPIO: + + struct gpio_desc *red, *green, *blue, *power; + + red = gpiod_get_index(dev, "led", 0); + green = gpiod_get_index(dev, "led", 1); + blue = gpiod_get_index(dev, "led", 2); + + power = gpiod_get(dev, "power"); + +The led GPIOs will be active-high, while the power GPIO will be active-low (i.e. +gpiod_is_active_low(power) will be true). + +ACPI +---- +ACPI does not support function names for GPIOs. Therefore, only the "idx" +argument of gpiod_get_index() is useful to discriminate between GPIOs assigned +to a device. The "con_id" argument can still be set for debugging purposes (it +will appear under error messages as well as debug and sysfs nodes). + +Platform Data +------------- +Finally, GPIOs can be bound to devices and functions using platform data. Board +files that desire to do so need to include the following header: + + #include <linux/gpio/driver.h> + +GPIOs are mapped by the means of tables of lookups, containing instances of the +gpiod_lookup structure. Two macros are defined to help declaring such mappings: + + GPIO_LOOKUP(chip_label, chip_hwnum, dev_id, con_id, flags) + GPIO_LOOKUP_IDX(chip_label, chip_hwnum, dev_id, con_id, idx, flags) + +where + + - chip_label is the label of the gpiod_chip instance providing the GPIO + - chip_hwnum is the hardware number of the GPIO within the chip + - dev_id is the identifier of the device that will make use of this GPIO. If + NULL, the GPIO will be available to all devices. + - con_id is the name of the GPIO function from the device point of view. It + can be NULL. + - idx is the index of the GPIO within the function. + - flags is defined to specify the following properties: + * GPIOF_ACTIVE_LOW - to configure the GPIO as active-low + * GPIOF_OPEN_DRAIN - GPIO pin is open drain type. + * GPIOF_OPEN_SOURCE - GPIO pin is open source type. + +In the future, these flags might be extended to support more properties. + +Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0. + +A lookup table can then be defined as follows: + + struct gpiod_lookup gpios_table[] = { + GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW), + }; + +And the table can be added by the board code as follows: + + gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table)); + +The driver controlling "foo.0" will then be able to obtain its GPIOs as follows: + + struct gpio_desc *red, *green, *blue, *power; + + red = gpiod_get_index(dev, "led", 0); + green = gpiod_get_index(dev, "led", 1); + blue = gpiod_get_index(dev, "led", 2); + + power = gpiod_get(dev, "power"); + gpiod_direction_output(power, 1); + +Since the "power" GPIO is mapped as active-low, its actual signal will be 0 +after this code. Contrary to the legacy integer GPIO interface, the active-low +property is handled during mapping and is thus transparent to GPIO consumers. diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt new file mode 100644 index 000000000000..07c74a3765a0 --- /dev/null +++ b/Documentation/gpio/consumer.txt @@ -0,0 +1,197 @@ +GPIO Descriptor Consumer Interface +================================== + +This document describes the consumer interface of the GPIO framework. Note that +it describes the new descriptor-based interface. For a description of the +deprecated integer-based GPIO interface please refer to gpio-legacy.txt. + + +Guidelines for GPIOs consumers +============================== + +Drivers that can't work without standard GPIO calls should have Kconfig entries +that depend on GPIOLIB. The functions that allow a driver to obtain and use +GPIOs are available by including the following file: + + #include <linux/gpio/consumer.h> + +All the functions that work with the descriptor-based GPIO interface are +prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No +other function in the kernel should use these prefixes. + + +Obtaining and Disposing GPIOs +============================= + +With the descriptor-based interface, GPIOs are identified with an opaque, +non-forgeable handler that must be obtained through a call to one of the +gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the +device that will use the GPIO and the function the requested GPIO is supposed to +fulfill: + + struct gpio_desc *gpiod_get(struct device *dev, const char *con_id) + +If a function is implemented by using several GPIOs together (e.g. a simple LED +device that displays digits), an additional index argument can be specified: + + struct gpio_desc *gpiod_get_index(struct device *dev, + const char *con_id, unsigned int idx) + +Both functions return either a valid GPIO descriptor, or an error code checkable +with IS_ERR(). They will never return a NULL pointer. + +Device-managed variants of these functions are also defined: + + struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id) + + struct gpio_desc *devm_gpiod_get_index(struct device *dev, + const char *con_id, + unsigned int idx) + +A GPIO descriptor can be disposed of using the gpiod_put() function: + + void gpiod_put(struct gpio_desc *desc) + +It is strictly forbidden to use a descriptor after calling this function. The +device-managed variant is, unsurprisingly: + + void devm_gpiod_put(struct device *dev, struct gpio_desc *desc) + + +Using GPIOs +=========== + +Setting Direction +----------------- +The first thing a driver must do with a GPIO is setting its direction. This is +done by invoking one of the gpiod_direction_*() functions: + + int gpiod_direction_input(struct gpio_desc *desc) + int gpiod_direction_output(struct gpio_desc *desc, int value) + +The return value is zero for success, else a negative errno. It should be +checked, since the get/set calls don't return errors and since misconfiguration +is possible. You should normally issue these calls from a task context. However, +for spinlock-safe GPIOs it is OK to use them before tasking is enabled, as part +of early board setup. + +For output GPIOs, the value provided becomes the initial output value. This +helps avoid signal glitching during system startup. + +A driver can also query the current direction of a GPIO: + + int gpiod_get_direction(const struct gpio_desc *desc) + +This function will return either GPIOF_DIR_IN or GPIOF_DIR_OUT. + +Be aware that there is no default direction for GPIOs. Therefore, **using a GPIO +without setting its direction first is illegal and will result in undefined +behavior!** + + +Spinlock-Safe GPIO Access +------------------------- +Most GPIO controllers can be accessed with memory read/write instructions. Those +don't need to sleep, and can safely be done from inside hard (non-threaded) IRQ +handlers and similar contexts. + +Use the following calls to access GPIOs from an atomic context: + + int gpiod_get_value(const struct gpio_desc *desc); + void gpiod_set_value(struct gpio_desc *desc, int value); + +The values are boolean, zero for low, nonzero for high. When reading the value +of an output pin, the value returned should be what's seen on the pin. That +won't always match the specified output value, because of issues including +open-drain signaling and output latencies. + +The get/set calls do not return errors because "invalid GPIO" should have been +reported earlier from gpiod_direction_*(). However, note that not all platforms +can read the value of output pins; those that can't should always return zero. +Also, using these calls for GPIOs that can't safely be accessed without sleeping +(see below) is an error. + + +GPIO Access That May Sleep +-------------------------- +Some GPIO controllers must be accessed using message based buses like I2C or +SPI. Commands to read or write those GPIO values require waiting to get to the +head of a queue to transmit a command and get its response. This requires +sleeping, which can't be done from inside IRQ handlers. + +Platforms that support this type of GPIO distinguish them from other GPIOs by +returning nonzero from this call: + + int gpiod_cansleep(const struct gpio_desc *desc) + +To access such GPIOs, a different set of accessors is defined: + + int gpiod_get_value_cansleep(const struct gpio_desc *desc) + void gpiod_set_value_cansleep(struct gpio_desc *desc, int value) + +Accessing such GPIOs requires a context which may sleep, for example a threaded +IRQ handler, and those accessors must be used instead of spinlock-safe +accessors without the cansleep() name suffix. + +Other than the fact that these accessors might sleep, and will work on GPIOs +that can't be accessed from hardIRQ handlers, these calls act the same as the +spinlock-safe calls. + + +Active-low State and Raw GPIO Values +------------------------------------ +Device drivers like to manage the logical state of a GPIO, i.e. the value their +device will actually receive, no matter what lies between it and the GPIO line. +In some cases, it might make sense to control the actual GPIO line value. The +following set of calls ignore the active-low property of a GPIO and work on the +raw line value: + + int gpiod_get_raw_value(const struct gpio_desc *desc) + void gpiod_set_raw_value(struct gpio_desc *desc, int value) + int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc) + void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value) + +The active-low state of a GPIO can also be queried using the following call: + + int gpiod_is_active_low(const struct gpio_desc *desc) + +Note that these functions should only be used with great moderation ; a driver +should not have to care about the physical line level. + +GPIOs mapped to IRQs +-------------------- +GPIO lines can quite often be used as IRQs. You can get the IRQ number +corresponding to a given GPIO using the following call: + + int gpiod_to_irq(const struct gpio_desc *desc) + +It will return an IRQ number, or an negative errno code if the mapping can't be +done (most likely because that particular GPIO cannot be used as IRQ). It is an +unchecked error to use a GPIO that wasn't set up as an input using +gpiod_direction_input(), or to use an IRQ number that didn't originally come +from gpiod_to_irq(). gpiod_to_irq() is not allowed to sleep. + +Non-error values returned from gpiod_to_irq() can be passed to request_irq() or +free_irq(). They will often be stored into IRQ resources for platform devices, +by the board-specific initialization code. Note that IRQ trigger options are +part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup +capabilities. + + +Interacting With the Legacy GPIO Subsystem +========================================== +Many kernel subsystems still handle GPIOs using the legacy integer-based +interface. Although it is strongly encouraged to upgrade them to the safer +descriptor-based API, the following two functions allow you to convert a GPIO +descriptor into the GPIO integer namespace and vice-versa: + + int desc_to_gpio(const struct gpio_desc *desc) + struct gpio_desc *gpio_to_desc(unsigned gpio) + +The GPIO number returned by desc_to_gpio() can be safely used as long as the +GPIO descriptor has not been freed. All the same, a GPIO number passed to +gpio_to_desc() must have been properly acquired, and usage of the returned GPIO +descriptor is only possible after the GPIO number has been released. + +Freeing a GPIO obtained by one API with the other API is forbidden and an +unchecked error. diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt new file mode 100644 index 000000000000..9da0bfa74781 --- /dev/null +++ b/Documentation/gpio/driver.txt @@ -0,0 +1,75 @@ +GPIO Descriptor Driver Interface +================================ + +This document serves as a guide for GPIO chip drivers writers. Note that it +describes the new descriptor-based interface. For a description of the +deprecated integer-based GPIO interface please refer to gpio-legacy.txt. + +Each GPIO controller driver needs to include the following header, which defines +the structures used to define a GPIO driver: + + #include <linux/gpio/driver.h> + + +Internal Representation of GPIOs +================================ + +Inside a GPIO driver, individual GPIOs are identified by their hardware number, +which is a unique number between 0 and n, n being the number of GPIOs managed by +the chip. This number is purely internal: the hardware number of a particular +GPIO descriptor is never made visible outside of the driver. + +On top of this internal number, each GPIO also need to have a global number in +the integer GPIO namespace so that it can be used with the legacy GPIO +interface. Each chip must thus have a "base" number (which can be automatically +assigned), and for each GPIO the global number will be (base + hardware number). +Although the integer representation is considered deprecated, it still has many +users and thus needs to be maintained. + +So for example one platform could use numbers 32-159 for GPIOs, with a +controller defining 128 GPIOs at a "base" of 32 ; while another platform uses +numbers 0..63 with one set of GPIO controllers, 64-79 with another type of GPIO +controller, and on one particular board 80-95 with an FPGA. The numbers need not +be contiguous; either of those platforms could also use numbers 2000-2063 to +identify GPIOs in a bank of I2C GPIO expanders. + + +Controller Drivers: gpio_chip +============================= + +In the gpiolib framework each GPIO controller is packaged as a "struct +gpio_chip" (see linux/gpio/driver.h for its complete definition) with members +common to each controller of that type: + + - methods to establish GPIO direction + - methods used to access GPIO values + - method to return the IRQ number associated to a given GPIO + - flag saying whether calls to its methods may sleep + - optional debugfs dump method (showing extra state like pullup config) + - optional base number (will be automatically assigned if omitted) + - label for diagnostics and GPIOs mapping using platform data + +The code implementing a gpio_chip should support multiple instances of the +controller, possibly using the driver model. That code will configure each +gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare; +use gpiochip_remove() when it is unavoidable. + +Most often a gpio_chip is part of an instance-specific structure with state not +exposed by the GPIO interfaces, such as addressing, power management, and more. +Chips such as codecs will have complex non-GPIO state. + +Any debugfs dump method should normally ignore signals which haven't been +requested as GPIOs. They can use gpiochip_is_requested(), which returns either +NULL or the label associated with that GPIO when it was requested. + +Locking IRQ usage +----------------- +Input GPIOs can be used as IRQ signals. When this happens, a driver is requested +to mark the GPIO as being used as an IRQ: + + int gpiod_lock_as_irq(struct gpio_desc *desc) + +This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock +is released: + + void gpiod_unlock_as_irq(struct gpio_desc *desc) diff --git a/Documentation/gpio.txt b/Documentation/gpio/gpio-legacy.txt index 6f83fa965b4b..6f83fa965b4b 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio/gpio-legacy.txt diff --git a/Documentation/gpio/gpio.txt b/Documentation/gpio/gpio.txt new file mode 100644 index 000000000000..cd9b356e88cd --- /dev/null +++ b/Documentation/gpio/gpio.txt @@ -0,0 +1,119 @@ +GPIO Interfaces +=============== + +The documents in this directory give detailed instructions on how to access +GPIOs in drivers, and how to write a driver for a device that provides GPIOs +itself. + +Due to the history of GPIO interfaces in the kernel, there are two different +ways to obtain and use GPIOs: + + - The descriptor-based interface is the preferred way to manipulate GPIOs, +and is described by all the files in this directory excepted gpio-legacy.txt. + - The legacy integer-based interface which is considered deprecated (but still +usable for compatibility reasons) is documented in gpio-legacy.txt. + +The remainder of this document applies to the new descriptor-based interface. +gpio-legacy.txt contains the same information applied to the legacy +integer-based interface. + + +What is a GPIO? +=============== + +A "General Purpose Input/Output" (GPIO) is a flexible software-controlled +digital signal. They are provided from many kinds of chip, and are familiar +to Linux developers working with embedded and custom hardware. Each GPIO +represents a bit connected to a particular pin, or "ball" on Ball Grid Array +(BGA) packages. Board schematics show which external hardware connects to +which GPIOs. Drivers can be written generically, so that board setup code +passes such pin configuration data to drivers. + +System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every +non-dedicated pin can be configured as a GPIO; and most chips have at least +several dozen of them. Programmable logic devices (like FPGAs) can easily +provide GPIOs; multifunction chips like power managers, and audio codecs +often have a few such pins to help with pin scarcity on SOCs; and there are +also "GPIO Expander" chips that connect using the I2C or SPI serial buses. +Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS +firmware knowing how they're used). + +The exact capabilities of GPIOs vary between systems. Common options: + + - Output values are writable (high=1, low=0). Some chips also have + options about how that value is driven, so that for example only one + value might be driven, supporting "wire-OR" and similar schemes for the + other value (notably, "open drain" signaling). + + - Input values are likewise readable (1, 0). Some chips support readback + of pins configured as "output", which is very useful in such "wire-OR" + cases (to support bidirectional signaling). GPIO controllers may have + input de-glitch/debounce logic, sometimes with software controls. + + - Inputs can often be used as IRQ signals, often edge triggered but + sometimes level triggered. Such IRQs may be configurable as system + wakeup events, to wake the system from a low power state. + + - Usually a GPIO will be configurable as either input or output, as needed + by different product boards; single direction ones exist too. + + - Most GPIOs can be accessed while holding spinlocks, but those accessed + through a serial bus normally can't. Some systems support both types. + +On a given board each GPIO is used for one specific purpose like monitoring +MMC/SD card insertion/removal, detecting card write-protect status, driving +a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware +watchdog, sensing a switch, and so on. + + +Common GPIO Properties +====================== + +These properties are met through all the other documents of the GPIO interface +and it is useful to understand them, especially if you need to define GPIO +mappings. + +Active-High and Active-Low +-------------------------- +It is natural to assume that a GPIO is "active" when its output signal is 1 +("high"), and inactive when it is 0 ("low"). However in practice the signal of a +GPIO may be inverted before is reaches its destination, or a device could decide +to have different conventions about what "active" means. Such decisions should +be transparent to device drivers, therefore it is possible to define a GPIO as +being either active-high ("1" means "active", the default) or active-low ("0" +means "active") so that drivers only need to worry about the logical signal and +not about what happens at the line level. + +Open Drain and Open Source +-------------------------- +Sometimes shared signals need to use "open drain" (where only the low signal +level is actually driven), or "open source" (where only the high signal level is +driven) signaling. That term applies to CMOS transistors; "open collector" is +used for TTL. A pullup or pulldown resistor causes the high or low signal level. +This is sometimes called a "wire-AND"; or more practically, from the negative +logic (low=true) perspective this is a "wire-OR". + +One common example of an open drain signal is a shared active-low IRQ line. +Also, bidirectional data bus signals sometimes use open drain signals. + +Some GPIO controllers directly support open drain and open source outputs; many +don't. When you need open drain signaling but your hardware doesn't directly +support it, there's a common idiom you can use to emulate it with any GPIO pin +that can be used as either an input or an output: + + LOW: gpiod_direction_output(gpio, 0) ... this drives the signal and overrides + the pullup. + + HIGH: gpiod_direction_input(gpio) ... this turns off the output, so the pullup + (or some other device) controls the signal. + +The same logic can be applied to emulate open source signaling, by driving the +high signal and configuring the GPIO as input for low. This open drain/open +source emulation can be handled transparently by the GPIO framework. + +If you are "driving" the signal high but gpiod_get_value(gpio) reports a low +value (after the appropriate rise time passes), you know some other component is +driving the shared signal low. That's not necessarily an error. As one common +example, that's how I2C clocks are stretched: a slave that needs a slower clock +delays the rising edge of SCK, and the I2C master adjusts its signaling rate +accordingly. diff --git a/Documentation/gpio/sysfs.txt b/Documentation/gpio/sysfs.txt new file mode 100644 index 000000000000..c2c3a97f8ff7 --- /dev/null +++ b/Documentation/gpio/sysfs.txt @@ -0,0 +1,155 @@ +GPIO Sysfs Interface for Userspace +================================== + +Platforms which use the "gpiolib" implementors framework may choose to +configure a sysfs user interface to GPIOs. This is different from the +debugfs interface, since it provides control over GPIO direction and +value instead of just showing a gpio state summary. Plus, it could be +present on production systems without debugging support. + +Given appropriate hardware documentation for the system, userspace could +know for example that GPIO #23 controls the write protect line used to +protect boot loader segments in flash memory. System upgrade procedures +may need to temporarily remove that protection, first importing a GPIO, +then changing its output state, then updating the code before re-enabling +the write protection. In normal use, GPIO #23 would never be touched, +and the kernel would have no need to know about it. + +Again depending on appropriate hardware documentation, on some systems +userspace GPIO can be used to determine system configuration data that +standard kernels won't know about. And for some tasks, simple userspace +GPIO drivers could be all that the system really needs. + +Note that standard kernel drivers exist for common "LEDs and Buttons" +GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those +instead of talking directly to the GPIOs; they integrate with kernel +frameworks better than your userspace code could. + + +Paths in Sysfs +-------------- +There are three kinds of entry in /sys/class/gpio: + + - Control interfaces used to get userspace control over GPIOs; + + - GPIOs themselves; and + + - GPIO controllers ("gpio_chip" instances). + +That's in addition to standard files including the "device" symlink. + +The control interfaces are write-only: + + /sys/class/gpio/ + + "export" ... Userspace may ask the kernel to export control of + a GPIO to userspace by writing its number to this file. + + Example: "echo 19 > export" will create a "gpio19" node + for GPIO #19, if that's not requested by kernel code. + + "unexport" ... Reverses the effect of exporting to userspace. + + Example: "echo 19 > unexport" will remove a "gpio19" + node exported using the "export" file. + +GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42) +and have the following read/write attributes: + + /sys/class/gpio/gpioN/ + + "direction" ... reads as either "in" or "out". This value may + normally be written. Writing as "out" defaults to + initializing the value as low. To ensure glitch free + operation, values "low" and "high" may be written to + configure the GPIO as an output with that initial value. + + Note that this attribute *will not exist* if the kernel + doesn't support changing the direction of a GPIO, or + it was exported by kernel code that didn't explicitly + allow userspace to reconfigure this GPIO's direction. + + "value" ... reads as either 0 (low) or 1 (high). If the GPIO + is configured as an output, this value may be written; + any nonzero value is treated as high. + + If the pin can be configured as interrupt-generating interrupt + and if it has been configured to generate interrupts (see the + description of "edge"), you can poll(2) on that file and + poll(2) will return whenever the interrupt was triggered. If + you use poll(2), set the events POLLPRI and POLLERR. If you + use select(2), set the file descriptor in exceptfds. After + poll(2) returns, either lseek(2) to the beginning of the sysfs + file and read the new value or close the file and re-open it + to read the value. + + "edge" ... reads as either "none", "rising", "falling", or + "both". Write these strings to select the signal edge(s) + that will make poll(2) on the "value" file return. + + This file exists only if the pin can be configured as an + interrupt generating input pin. + + "active_low" ... reads as either 0 (false) or 1 (true). Write + any nonzero value to invert the value attribute both + for reading and writing. Existing and subsequent + poll(2) support configuration via the edge attribute + for "rising" and "falling" edges will follow this + setting. + +GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the +controller implementing GPIOs starting at #42) and have the following +read-only attributes: + + /sys/class/gpio/gpiochipN/ + + "base" ... same as N, the first GPIO managed by this chip + + "label" ... provided for diagnostics (not always unique) + + "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1) + +Board documentation should in most cases cover what GPIOs are used for +what purposes. However, those numbers are not always stable; GPIOs on +a daughtercard might be different depending on the base board being used, +or other cards in the stack. In such cases, you may need to use the +gpiochip nodes (possibly in conjunction with schematics) to determine +the correct GPIO number to use for a given signal. + + +Exporting from Kernel code +-------------------------- +Kernel code can explicitly manage exports of GPIOs which have already been +requested using gpio_request(): + + /* export the GPIO to userspace */ + int gpiod_export(struct gpio_desc *desc, bool direction_may_change); + + /* reverse gpio_export() */ + void gpiod_unexport(struct gpio_desc *desc); + + /* create a sysfs link to an exported GPIO node */ + int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc); + + /* change the polarity of a GPIO node in sysfs */ + int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value); + +After a kernel driver requests a GPIO, it may only be made available in +the sysfs interface by gpiod_export(). The driver can control whether the +signal direction may change. This helps drivers prevent userspace code +from accidentally clobbering important system state. + +This explicit exporting can help with debugging (by making some kinds +of experiments easier), or can provide an always-there interface that's +suitable for documenting as part of a board support package. + +After the GPIO has been exported, gpiod_export_link() allows creating +symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can +use this to provide the interface under their own device in sysfs with +a descriptive name. + +Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity +differences between boards from user space. Polarity change can be done both +before and after gpiod_export(), and previously enabled poll(2) support for +either rising or falling edge will be reconfigured to follow this setting. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e06e99303dd3..d7e736c53e51 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1535,6 +1535,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. * atapi_dmadir: Enable ATAPI DMADIR bridge support + * disable: Disable this device. + If there are multiple matching configurations changing the same attribute, the last one is used. diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 0c980ad40b17..4d17487d5ad9 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c @@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type) int i; void *dp = get_dp(mic, type); - for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE; + for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE; i += mic_total_desc_size(d)) { d = dp + i; @@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type, __func__, mic->name, vr0->va, vr0->info, vr_size, vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); mpsslog("magic 0x%x expected 0x%x\n", - vr0->info->magic, MIC_MAGIC + type); - assert(vr0->info->magic == MIC_MAGIC + type); + le32toh(vr0->info->magic), MIC_MAGIC + type); + assert(le32toh(vr0->info->magic) == MIC_MAGIC + type); if (vr1) { vr1->va = (struct mic_vring *) &va[MIC_DEVICE_PAGE_END + vr_size]; @@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type, __func__, mic->name, vr1->va, vr1->info, vr_size, vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); mpsslog("magic 0x%x expected 0x%x\n", - vr1->info->magic, MIC_MAGIC + type + 1); - assert(vr1->info->magic == MIC_MAGIC + type + 1); + le32toh(vr1->info->magic), MIC_MAGIC + type + 1); + assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1); } done: return va; @@ -520,7 +520,7 @@ static void * virtio_net(void *arg) { static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)]; - static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64); + static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64))); struct iovec vnet_iov[2][2] = { { { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) }, { .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } }, @@ -1412,6 +1412,12 @@ mic_config(void *arg) } do { + ret = lseek(fd, 0, SEEK_SET); + if (ret < 0) { + mpsslog("%s: Failed to seek to file start '%s': %s\n", + mic->name, pathname, strerror(errno)); + goto close_error1; + } ret = read(fd, value, sizeof(value)); if (ret < 0) { mpsslog("%s: Failed to read sysfs entry '%s': %s\n", diff --git a/Documentation/module-signing.txt b/Documentation/module-signing.txt new file mode 100644 index 000000000000..2b40e04d3c49 --- /dev/null +++ b/Documentation/module-signing.txt @@ -0,0 +1,240 @@ + ============================== + KERNEL MODULE SIGNING FACILITY + ============================== + +CONTENTS + + - Overview. + - Configuring module signing. + - Generating signing keys. + - Public keys in the kernel. + - Manually signing modules. + - Signed modules and stripping. + - Loading signed modules. + - Non-valid signatures and unsigned modules. + - Administering/protecting the private key. + + +======== +OVERVIEW +======== + +The kernel module signing facility cryptographically signs modules during +installation and then checks the signature upon loading the module. This +allows increased kernel security by disallowing the loading of unsigned modules +or modules signed with an invalid key. Module signing increases security by +making it harder to load a malicious module into the kernel. The module +signature checking is done by the kernel so that it is not necessary to have +trusted userspace bits. + +This facility uses X.509 ITU-T standard certificates to encode the public keys +involved. The signatures are not themselves encoded in any industrial standard +type. The facility currently only supports the RSA public key encryption +standard (though it is pluggable and permits others to be used). The possible +hash algorithms that can be used are SHA-1, SHA-224, SHA-256, SHA-384, and +SHA-512 (the algorithm is selected by data in the signature). + + +========================== +CONFIGURING MODULE SIGNING +========================== + +The module signing facility is enabled by going to the "Enable Loadable Module +Support" section of the kernel configuration and turning on + + CONFIG_MODULE_SIG "Module signature verification" + +This has a number of options available: + + (1) "Require modules to be validly signed" (CONFIG_MODULE_SIG_FORCE) + + This specifies how the kernel should deal with a module that has a + signature for which the key is not known or a module that is unsigned. + + If this is off (ie. "permissive"), then modules for which the key is not + available and modules that are unsigned are permitted, but the kernel will + be marked as being tainted. + + If this is on (ie. "restrictive"), only modules that have a valid + signature that can be verified by a public key in the kernel's possession + will be loaded. All other modules will generate an error. + + Irrespective of the setting here, if the module has a signature block that + cannot be parsed, it will be rejected out of hand. + + + (2) "Automatically sign all modules" (CONFIG_MODULE_SIG_ALL) + + If this is on then modules will be automatically signed during the + modules_install phase of a build. If this is off, then the modules must + be signed manually using: + + scripts/sign-file + + + (3) "Which hash algorithm should modules be signed with?" + + This presents a choice of which hash algorithm the installation phase will + sign the modules with: + + CONFIG_SIG_SHA1 "Sign modules with SHA-1" + CONFIG_SIG_SHA224 "Sign modules with SHA-224" + CONFIG_SIG_SHA256 "Sign modules with SHA-256" + CONFIG_SIG_SHA384 "Sign modules with SHA-384" + CONFIG_SIG_SHA512 "Sign modules with SHA-512" + + The algorithm selected here will also be built into the kernel (rather + than being a module) so that modules signed with that algorithm can have + their signatures checked without causing a dependency loop. + + +======================= +GENERATING SIGNING KEYS +======================= + +Cryptographic keypairs are required to generate and check signatures. A +private key is used to generate a signature and the corresponding public key is +used to check it. The private key is only needed during the build, after which +it can be deleted or stored securely. The public key gets built into the +kernel so that it can be used to check the signatures as the modules are +loaded. + +Under normal conditions, the kernel build will automatically generate a new +keypair using openssl if one does not exist in the files: + + signing_key.priv + signing_key.x509 + +during the building of vmlinux (the public part of the key needs to be built +into vmlinux) using parameters in the: + + x509.genkey + +file (which is also generated if it does not already exist). + +It is strongly recommended that you provide your own x509.genkey file. + +Most notably, in the x509.genkey file, the req_distinguished_name section +should be altered from the default: + + [ req_distinguished_name ] + O = Magrathea + CN = Glacier signing key + emailAddress = slartibartfast@magrathea.h2g2 + +The generated RSA key size can also be set with: + + [ req ] + default_bits = 4096 + + +It is also possible to manually generate the key private/public files using the +x509.genkey key generation configuration file in the root node of the Linux +kernel sources tree and the openssl command. The following is an example to +generate the public/private key files: + + openssl req -new -nodes -utf8 -sha256 -days 36500 -batch -x509 \ + -config x509.genkey -outform DER -out signing_key.x509 \ + -keyout signing_key.priv + + +========================= +PUBLIC KEYS IN THE KERNEL +========================= + +The kernel contains a ring of public keys that can be viewed by root. They're +in a keyring called ".system_keyring" that can be seen by: + + [root@deneb ~]# cat /proc/keys + ... + 223c7853 I------ 1 perm 1f030000 0 0 keyring .system_keyring: 1 + 302d2d52 I------ 1 perm 1f010000 0 0 asymmetri Fedora kernel signing key: d69a84e6bce3d216b979e9505b3e3ef9a7118079: X509.RSA a7118079 [] + ... + +Beyond the public key generated specifically for module signing, any file +placed in the kernel source root directory or the kernel build root directory +whose name is suffixed with ".x509" will be assumed to be an X.509 public key +and will be added to the keyring. + +Further, the architecture code may take public keys from a hardware store and +add those in also (e.g. from the UEFI key database). + +Finally, it is possible to add additional public keys by doing: + + keyctl padd asymmetric "" [.system_keyring-ID] <[key-file] + +e.g.: + + keyctl padd asymmetric "" 0x223c7853 <my_public_key.x509 + +Note, however, that the kernel will only permit keys to be added to +.system_keyring _if_ the new key's X.509 wrapper is validly signed by a key +that is already resident in the .system_keyring at the time the key was added. + + +========================= +MANUALLY SIGNING MODULES +========================= + +To manually sign a module, use the scripts/sign-file tool available in +the Linux kernel source tree. The script requires 4 arguments: + + 1. The hash algorithm (e.g., sha256) + 2. The private key filename + 3. The public key filename + 4. The kernel module to be signed + +The following is an example to sign a kernel module: + + scripts/sign-file sha512 kernel-signkey.priv \ + kernel-signkey.x509 module.ko + +The hash algorithm used does not have to match the one configured, but if it +doesn't, you should make sure that hash algorithm is either built into the +kernel or can be loaded without requiring itself. + + +============================ +SIGNED MODULES AND STRIPPING +============================ + +A signed module has a digital signature simply appended at the end. The string +"~Module signature appended~." at the end of the module's file confirms that a +signature is present but it does not confirm that the signature is valid! + +Signed modules are BRITTLE as the signature is outside of the defined ELF +container. Thus they MAY NOT be stripped once the signature is computed and +attached. Note the entire module is the signed payload, including any and all +debug information present at the time of signing. + + +====================== +LOADING SIGNED MODULES +====================== + +Modules are loaded with insmod, modprobe, init_module() or finit_module(), +exactly as for unsigned modules as no processing is done in userspace. The +signature checking is all done within the kernel. + + +========================================= +NON-VALID SIGNATURES AND UNSIGNED MODULES +========================================= + +If CONFIG_MODULE_SIG_FORCE is enabled or enforcemodulesig=1 is supplied on +the kernel command line, the kernel will only load validly signed modules +for which it has a public key. Otherwise, it will also load modules that are +unsigned. Any module for which the kernel has a key, but which proves to have +a signature mismatch will not be permitted to load. + +Any module that has an unparseable signature will be rejected. + + +========================================= +ADMINISTERING/PROTECTING THE PRIVATE KEY +========================================= + +Since the private key is used to sign modules, viruses and malware could use +the private key to sign modules and compromise the operating system. The +private key must be either destroyed or moved to a secure location and not kept +in the root node of the kernel source tree. diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 3c12d9a7ed00..8a984e994e61 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -16,8 +16,12 @@ ip_default_ttl - INTEGER Default: 64 (as recommended by RFC1700) ip_no_pmtu_disc - BOOLEAN - Disable Path MTU Discovery. - default FALSE + Disable Path MTU Discovery. If enabled and a + fragmentation-required ICMP is received, the PMTU to this + destination will be set to min_pmtu (see below). You will need + to raise min_pmtu to the smallest interface MTU on your system + manually if you want to avoid locally generated fragments. + Default: FALSE min_pmtu - INTEGER default 552 - minimum discovered Path MTU diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index c01223628a87..8e48e3b14227 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -123,6 +123,16 @@ Transmission process is similar to capture as shown below. [shutdown] close() --------> destruction of the transmission socket and deallocation of all associated resources. +Socket creation and destruction is also straight forward, and is done +the same way as in capturing described in the previous paragraph: + + int fd = socket(PF_PACKET, mode, 0); + +The protocol can optionally be 0 in case we only want to transmit +via this socket, which avoids an expensive call to packet_rcv(). +In this case, you also need to bind(2) the TX_RING with sll_protocol = 0 +set. Otherwise, htons(ETH_P_ALL) or any other protocol, for example. + Binding the socket to your network interface is mandatory (with zero copy) to know the header size of frames used in the circular buffer. |