diff options
| author | Patrick McHardy <kaber@trash.net> | 2013-04-19 02:04:31 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2013-04-19 14:46:06 -0400 |
| commit | 8ad227ff89a7e6f05d07cd0acfd95ed3a24450ca (patch) | |
| tree | 90cb532df2523a011e47844434cc423664441d71 /firmware/atmsar11.HEX | |
| parent | 86a9bad3ab6b6f858fd4443b48738cabbb6d094c (diff) | |
| download | linux-stable-8ad227ff89a7e6f05d07cd0acfd95ed3a24450ca.tar.gz linux-stable-8ad227ff89a7e6f05d07cd0acfd95ed3a24450ca.tar.bz2 linux-stable-8ad227ff89a7e6f05d07cd0acfd95ed3a24450ca.zip | |
net: vlan: add 802.1ad support
Add support for 802.1ad VLAN devices. This mainly consists of checking for
ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check
offloading capabilities based on the used protocol.
Configuration is done using "ip link":
# ip link add link eth0 eth0.1000 \
type vlan proto 802.1ad id 1000
# ip link add link eth0.1000 eth0.1000.1000 \
type vlan proto 802.1q id 1000
52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64
92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84)
20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'firmware/atmsar11.HEX')
0 files changed, 0 insertions, 0 deletions