diff options
| author | Peter Ujfalusi <peter.ujfalusi@ti.com> | 2012-11-13 10:35:13 +0100 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2012-11-17 21:15:33 +0100 |
| commit | 9859eb99e9212339e2009b98c396b08260276edf (patch) | |
| tree | e99f468ab38110c6b4e738d2fc9ff48980e846da /drivers/gpio | |
| parent | 195812e4b6a631e8eaad4046bf6890db4328ea1f (diff) | |
| download | linux-stable-9859eb99e9212339e2009b98c396b08260276edf.tar.gz linux-stable-9859eb99e9212339e2009b98c396b08260276edf.tar.bz2 linux-stable-9859eb99e9212339e2009b98c396b08260276edf.zip | |
gpio: twl4030: Use only TWL4030_MODULE_LED for LED configuration
Avoid using the TWL4030_MODULE_PWMA/B as module ID. The LEDEN, PWMA ON/OFF
and PWMB ON/OFF registers are in a continuous range starting from LED base.
This is going to be helpful for further cleanup in the twl stack.
No functional changes.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/gpio')
| -rw-r--r-- | drivers/gpio/gpio-twl4030.c | 35 |
1 files changed, 18 insertions, 17 deletions
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index c5f8ca233e1f..d2138b0fd4ca 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -88,11 +88,15 @@ static inline int gpio_twl4030_write(u8 address, u8 data) /*----------------------------------------------------------------------*/ /* - * LED register offsets (use TWL4030_MODULE_{LED,PWMA,PWMB})) + * LED register offsets from TWL_MODULE_LED base * PWMs A and B are dedicated to LEDs A and B, respectively. */ -#define TWL4030_LED_LEDEN 0x0 +#define TWL4030_LED_LEDEN_REG 0x00 +#define TWL4030_PWMAON_REG 0x01 +#define TWL4030_PWMAOFF_REG 0x02 +#define TWL4030_PWMBON_REG 0x03 +#define TWL4030_PWMBOFF_REG 0x04 /* LEDEN bits */ #define LEDEN_LEDAON BIT(0) @@ -104,9 +108,6 @@ static inline int gpio_twl4030_write(u8 address, u8 data) #define LEDEN_PWM_LENGTHA BIT(6) #define LEDEN_PWM_LENGTHB BIT(7) -#define TWL4030_PWMx_PWMxON 0x0 -#define TWL4030_PWMx_PWMxOFF 0x1 - #define PWMxON_LENGTH BIT(7) /*----------------------------------------------------------------------*/ @@ -145,7 +146,7 @@ static void twl4030_led_set_value(int led, int value) else cached_leden |= mask; status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, - TWL4030_LED_LEDEN); + TWL4030_LED_LEDEN_REG); mutex_unlock(&gpio_lock); } @@ -216,33 +217,33 @@ static int twl_request(struct gpio_chip *chip, unsigned offset) if (offset >= TWL4030_GPIO_MAX) { u8 ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT | LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA; - u8 module = TWL4030_MODULE_PWMA; + u8 reg = TWL4030_PWMAON_REG; offset -= TWL4030_GPIO_MAX; if (offset) { ledclr_mask <<= 1; - module = TWL4030_MODULE_PWMB; + reg = TWL4030_PWMBON_REG; } /* initialize PWM to always-drive */ - status = twl_i2c_write_u8(module, 0x7f, - TWL4030_PWMx_PWMxOFF); + /* Configure PWM OFF register first */ + status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg + 1); if (status < 0) goto done; - status = twl_i2c_write_u8(module, 0x7f, - TWL4030_PWMx_PWMxON); + + /* Followed by PWM ON register */ + status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg); if (status < 0) goto done; /* init LED to not-driven (high) */ - module = TWL4030_MODULE_LED; - status = twl_i2c_read_u8(module, &cached_leden, - TWL4030_LED_LEDEN); + status = twl_i2c_read_u8(TWL4030_MODULE_LED, &cached_leden, + TWL4030_LED_LEDEN_REG); if (status < 0) goto done; cached_leden &= ~ledclr_mask; - status = twl_i2c_write_u8(module, cached_leden, - TWL4030_LED_LEDEN); + status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, + TWL4030_LED_LEDEN_REG); if (status < 0) goto done; |