Merge tag 'spi-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "A quiet release for SPI, mainly driver updates and not too many of
  them:

   - Support for dummy transfers (for delays on startup) in drivers
     using transfer_one().
   - Lots of enhancements to the Designware driver to support new Intel
     SoCs.
   - Support for newer Renesas chips.
   - DMA support for the i.MX driver.
   - One new driver for Broadcom BCM53xx chips"

* tag 'spi-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits)
  spi: spi-mxs: fix a tiny typo in a comment
  spi: dw-mid: follow new DMAengine workflow
  spi: dw-mid: convert to use DMAengine wrappers
  spi: dw-mid: change magic numbers to the constants
  spi: orion: support armada extended baud rates
  spi: fsl: Sort include headers alphabetically
  spi: bcm53xx: Add missing module information
  spi: bcm53xx: Fix module dependency
  spi/rockchip: fix bug that cause the failure to read data in DMA mode
  spi: fsl-dspi: Remove probe info message
  spi: pl022: Add support for chip select extension
  spi: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  spi: dw: fix style of code in few places
  spi: dw: introduce support of loopback mode
  spi: dw-mid: terminate ongoing transfers at exit
  spi: dw-mid: respect 8 bit mode
  spi: clps711x: Migrate to the new clk subsystem
  spi: pl022: Add missing error check for devm_kzalloc
  spi: spi-imx: add DMA support
  spi: davinci: add support for adding delay between word's transmissions
  ...

1 files changed, 33 insertions, 22 deletions

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index ad87a98f8f68..54bb0faec155 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -87,7 +87,7 @@
 /* RSPI on SH only */
 #define SPCR_TXMD		0x02	/* TX Only Mode (vs. Full Duplex) */
 #define SPCR_SPMS		0x01	/* 3-wire Mode (vs. 4-wire) */
-/* QSPI on R-Car M2 only */
+/* QSPI on R-Car Gen2 only */
 #define SPCR_WSWAP		0x02	/* Word Swap of read-data for DMAC */
 #define SPCR_BSWAP		0x01	/* Byte Swap of read-data for DMAC */
 
@@ -909,20 +909,24 @@ static struct dma_chan *rspi_request_dma_chan(struct device *dev,
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
-	chan = dma_request_channel(mask, shdma_chan_filter,
-				   (void *)(unsigned long)id);
+	chan = dma_request_slave_channel_compat(mask, shdma_chan_filter,
+				(void *)(unsigned long)id, dev,
+				dir == DMA_MEM_TO_DEV ? "tx" : "rx");
 	if (!chan) {
-		dev_warn(dev, "dma_request_channel failed\n");
+		dev_warn(dev, "dma_request_slave_channel_compat failed\n");
 		return NULL;
 	}
 
 	memset(&cfg, 0, sizeof(cfg));
 	cfg.slave_id = id;
 	cfg.direction = dir;
-	if (dir == DMA_MEM_TO_DEV)
+	if (dir == DMA_MEM_TO_DEV) {
 		cfg.dst_addr = port_addr;
-	else
+		cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	} else {
 		cfg.src_addr = port_addr;
+		cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	}
 
 	ret = dmaengine_slave_config(chan, &cfg);
 	if (ret) {
@@ -938,22 +942,30 @@ static int rspi_request_dma(struct device *dev, struct spi_master *master,
 			    const struct resource *res)
 {
 	const struct rspi_plat_data *rspi_pd = dev_get_platdata(dev);
+	unsigned int dma_tx_id, dma_rx_id;
+
+	if (dev->of_node) {
+		/* In the OF case we will get the slave IDs from the DT */
+		dma_tx_id = 0;
+		dma_rx_id = 0;
+	} else if (rspi_pd && rspi_pd->dma_tx_id && rspi_pd->dma_rx_id) {
+		dma_tx_id = rspi_pd->dma_tx_id;
+		dma_rx_id = rspi_pd->dma_rx_id;
+	} else {
+		/* The driver assumes no error. */
+		return 0;
+	}
 
-	if (!rspi_pd || !rspi_pd->dma_rx_id || !rspi_pd->dma_tx_id)
-		return 0;	/* The driver assumes no error. */
-
-	master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM,
-					       rspi_pd->dma_rx_id,
+	master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, dma_tx_id,
 					       res->start + RSPI_SPDR);
-	if (!master->dma_rx)
+	if (!master->dma_tx)
 		return -ENODEV;
 
-	master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV,
-					       rspi_pd->dma_tx_id,
+	master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, dma_rx_id,
 					       res->start + RSPI_SPDR);
-	if (!master->dma_tx) {
-		dma_release_channel(master->dma_rx);
-		master->dma_rx = NULL;
+	if (!master->dma_rx) {
+		dma_release_channel(master->dma_tx);
+		master->dma_tx = NULL;
 		return -ENODEV;
 	}
 
@@ -1046,12 +1058,11 @@ static int rspi_request_irq(struct device *dev, unsigned int irq,
 			    irq_handler_t handler, const char *suffix,
 			    void *dev_id)
 {
-	const char *base = dev_name(dev);
-	size_t len = strlen(base) + strlen(suffix) + 2;
-	char *name = devm_kzalloc(dev, len, GFP_KERNEL);
+	const char *name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s",
+					  dev_name(dev), suffix);
 	if (!name)
 		return -ENOMEM;
-	snprintf(name, len, "%s:%s", base, suffix);
+
 	return devm_request_irq(dev, irq, handler, 0, name, dev_id);
 }
 
@@ -1084,7 +1095,7 @@ static int rspi_probe(struct platform_device *pdev)
 			master->num_chipselect = rspi_pd->num_chipselect;
 		else
 			master->num_chipselect = 2; /* default */
-	};
+	}
 
 	/* ops parameter check */
 	if (!ops->set_config_register) {