Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 702 insertions, 0 deletions

diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c
new file mode 100644
index 000000000000..ca41d62b1d9d
--- /dev/null
+++ b/drivers/char/nwflash.c
@@ -0,0 +1,702 @@
+/*
+ * Flash memory interface rev.5 driver for the Intel
+ * Flash chips used on the NetWinder.
+ *
+ * 20/08/2000	RMK	use __ioremap to map flash into virtual memory
+ *			make a few more places use "volatile"
+ * 22/05/2001	RMK	- Lock read against write
+ *			- merge printk level changes (with mods) from Alan Cox.
+ *			- use *ppos as the file position, not file->f_pos.
+ *			- fix check for out of range pos and r/w size
+ *
+ * Please note that we are tampering with the only flash chip in the
+ * machine, which contains the bootup code.  We therefore have the
+ * power to convert these machines into doorstops...
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <linux/sched.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+#include <linux/init.h>
+#include <linux/smp_lock.h>
+
+#include <asm/hardware/dec21285.h>
+#include <asm/io.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+/*****************************************************************************/
+#include <asm/nwflash.h>
+
+#define	NWFLASH_VERSION "6.4"
+
+static void kick_open(void);
+static int get_flash_id(void);
+static int erase_block(int nBlock);
+static int write_block(unsigned long p, const char __user *buf, int count);
+
+#define KFLASH_SIZE	1024*1024	//1 Meg
+#define KFLASH_SIZE4	4*1024*1024	//4 Meg
+#define KFLASH_ID	0x89A6		//Intel flash
+#define KFLASH_ID4	0xB0D4		//Intel flash 4Meg
+
+static int flashdebug;		//if set - we will display progress msgs
+
+static int gbWriteEnable;
+static int gbWriteBase64Enable;
+static volatile unsigned char *FLASH_BASE;
+static int gbFlashSize = KFLASH_SIZE;
+static DECLARE_MUTEX(nwflash_sem);
+
+extern spinlock_t gpio_lock;
+
+static int get_flash_id(void)
+{
+	volatile unsigned int c1, c2;
+
+	/*
+	 * try to get flash chip ID
+	 */
+	kick_open();
+	c2 = inb(0x80);
+	*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x90;
+	udelay(15);
+	c1 = *(volatile unsigned char *) FLASH_BASE;
+	c2 = inb(0x80);
+
+	/*
+	 * on 4 Meg flash the second byte is actually at offset 2...
+	 */
+	if (c1 == 0xB0)
+		c2 = *(volatile unsigned char *) (FLASH_BASE + 2);
+	else
+		c2 = *(volatile unsigned char *) (FLASH_BASE + 1);
+
+	c2 += (c1 << 8);
+
+	/*
+	 * set it back to read mode
+	 */
+	*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0xFF;
+
+	if (c2 == KFLASH_ID4)
+		gbFlashSize = KFLASH_SIZE4;
+
+	return c2;
+}
+
+static int flash_ioctl(struct inode *inodep, struct file *filep, unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case CMD_WRITE_DISABLE:
+		gbWriteBase64Enable = 0;
+		gbWriteEnable = 0;
+		break;
+
+	case CMD_WRITE_ENABLE:
+		gbWriteEnable = 1;
+		break;
+
+	case CMD_WRITE_BASE64K_ENABLE:
+		gbWriteBase64Enable = 1;
+		break;
+
+	default:
+		gbWriteBase64Enable = 0;
+		gbWriteEnable = 0;
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static ssize_t flash_read(struct file *file, char __user *buf, size_t size,
+			  loff_t *ppos)
+{
+	unsigned long p = *ppos;
+	unsigned int count = size;
+	int ret = 0;
+
+	if (flashdebug)
+		printk(KERN_DEBUG "flash_read: flash_read: offset=0x%lX, "
+		       "buffer=%p, count=0x%X.\n", p, buf, count);
+
+	if (count)
+		ret = -ENXIO;
+
+	if (p < gbFlashSize) {
+		if (count > gbFlashSize - p)
+			count = gbFlashSize - p;
+
+		/*
+		 * We now lock against reads and writes. --rmk
+		 */
+		if (down_interruptible(&nwflash_sem))
+			return -ERESTARTSYS;
+
+		ret = copy_to_user(buf, (void *)(FLASH_BASE + p), count);
+		if (ret == 0) {
+			ret = count;
+			*ppos += count;
+		} else
+			ret = -EFAULT;
+		up(&nwflash_sem);
+	}
+	return ret;
+}
+
+static ssize_t flash_write(struct file *file, const char __user *buf,
+			   size_t size, loff_t * ppos)
+{
+	unsigned long p = *ppos;
+	unsigned int count = size;
+	int written;
+	int nBlock, temp, rc;
+	int i, j;
+
+	if (flashdebug)
+		printk("flash_write: offset=0x%lX, buffer=0x%p, count=0x%X.\n",
+		       p, buf, count);
+
+	if (!gbWriteEnable)
+		return -EINVAL;
+
+	if (p < 64 * 1024 && (!gbWriteBase64Enable))
+		return -EINVAL;
+
+	/*
+	 * check for out of range pos or count
+	 */
+	if (p >= gbFlashSize)
+		return count ? -ENXIO : 0;
+
+	if (count > gbFlashSize - p)
+		count = gbFlashSize - p;
+			
+	if (!access_ok(VERIFY_READ, buf, count))
+		return -EFAULT;
+
+	/*
+	 * We now lock against reads and writes. --rmk
+	 */
+	if (down_interruptible(&nwflash_sem))
+		return -ERESTARTSYS;
+
+	written = 0;
+
+	leds_event(led_claim);
+	leds_event(led_green_on);
+
+	nBlock = (int) p >> 16;	//block # of 64K bytes
+
+	/*
+	 * # of 64K blocks to erase and write
+	 */
+	temp = ((int) (p + count) >> 16) - nBlock + 1;
+
+	/*
+	 * write ends at exactly 64k boundary?
+	 */
+	if (((int) (p + count) & 0xFFFF) == 0)
+		temp -= 1;
+
+	if (flashdebug)
+		printk(KERN_DEBUG "flash_write: writing %d block(s) "
+			"starting at %d.\n", temp, nBlock);
+
+	for (; temp; temp--, nBlock++) {
+		if (flashdebug)
+			printk(KERN_DEBUG "flash_write: erasing block %d.\n", nBlock);
+
+		/*
+		 * first we have to erase the block(s), where we will write...
+		 */
+		i = 0;
+		j = 0;
+	  RetryBlock:
+		do {
+			rc = erase_block(nBlock);
+			i++;
+		} while (rc && i < 10);
+
+		if (rc) {
+			printk(KERN_ERR "flash_write: erase error %x\n", rc);
+			break;
+		}
+		if (flashdebug)
+			printk(KERN_DEBUG "flash_write: writing offset %lX, "
+			       "from buf %p, bytes left %X.\n", p, buf,
+			       count - written);
+
+		/*
+		 * write_block will limit write to space left in this block
+		 */
+		rc = write_block(p, buf, count - written);
+		j++;
+
+		/*
+		 * if somehow write verify failed? Can't happen??
+		 */
+		if (!rc) {
+			/*
+			 * retry up to 10 times
+			 */
+			if (j < 10)
+				goto RetryBlock;
+			else
+				/*
+				 * else quit with error...
+				 */
+				rc = -1;
+
+		}
+		if (rc < 0) {
+			printk(KERN_ERR "flash_write: write error %X\n", rc);
+			break;
+		}
+		p += rc;
+		buf += rc;
+		written += rc;
+		*ppos += rc;
+
+		if (flashdebug)
+			printk(KERN_DEBUG "flash_write: written 0x%X bytes OK.\n", written);
+	}
+
+	/*
+	 * restore reg on exit
+	 */
+	leds_event(led_release);
+
+	up(&nwflash_sem);
+
+	return written;
+}
+
+
+/*
+ * The memory devices use the full 32/64 bits of the offset, and so we cannot
+ * check against negative addresses: they are ok. The return value is weird,
+ * though, in that case (0).
+ *
+ * also note that seeking relative to the "end of file" isn't supported:
+ * it has no meaning, so it returns -EINVAL.
+ */
+static loff_t flash_llseek(struct file *file, loff_t offset, int orig)
+{
+	loff_t ret;
+
+	lock_kernel();
+	if (flashdebug)
+		printk(KERN_DEBUG "flash_llseek: offset=0x%X, orig=0x%X.\n",
+		       (unsigned int) offset, orig);
+
+	switch (orig) {
+	case 0:
+		if (offset < 0) {
+			ret = -EINVAL;
+			break;
+		}
+
+		if ((unsigned int) offset > gbFlashSize) {
+			ret = -EINVAL;
+			break;
+		}
+
+		file->f_pos = (unsigned int) offset;
+		ret = file->f_pos;
+		break;
+	case 1:
+		if ((file->f_pos + offset) > gbFlashSize) {
+			ret = -EINVAL;
+			break;
+		}
+		if ((file->f_pos + offset) < 0) {
+			ret = -EINVAL;
+			break;
+		}
+		file->f_pos += offset;
+		ret = file->f_pos;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	unlock_kernel();
+	return ret;
+}
+
+
+/*
+ * assume that main Write routine did the parameter checking...
+ * so just go ahead and erase, what requested!
+ */
+
+static int erase_block(int nBlock)
+{
+	volatile unsigned int c1;
+	volatile unsigned char *pWritePtr;
+	unsigned long timeout;
+	int temp, temp1;
+
+	/*
+	 * orange LED == erase
+	 */
+	leds_event(led_amber_on);
+
+	/*
+	 * reset footbridge to the correct offset 0 (...0..3)
+	 */
+	*CSR_ROMWRITEREG = 0;
+
+	/*
+	 * dummy ROM read
+	 */
+	c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
+
+	kick_open();
+	/*
+	 * reset status if old errors
+	 */
+	*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
+
+	/*
+	 * erase a block...
+	 * aim at the middle of a current block...
+	 */
+	pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + 0x8000 + (nBlock << 16)));
+	/*
+	 * dummy read
+	 */
+	c1 = *pWritePtr;
+
+	kick_open();
+	/*
+	 * erase
+	 */
+	*(volatile unsigned char *) pWritePtr = 0x20;
+
+	/*
+	 * confirm
+	 */
+	*(volatile unsigned char *) pWritePtr = 0xD0;
+
+	/*
+	 * wait 10 ms
+	 */
+	msleep(10);
+
+	/*
+	 * wait while erasing in process (up to 10 sec)
+	 */
+	timeout = jiffies + 10 * HZ;
+	c1 = 0;
+	while (!(c1 & 0x80) && time_before(jiffies, timeout)) {
+		msleep(10);
+		/*
+		 * read any address
+		 */
+		c1 = *(volatile unsigned char *) (pWritePtr);
+		//              printk("Flash_erase: status=%X.\n",c1);
+	}
+
+	/*
+	 * set flash for normal read access
+	 */
+	kick_open();
+//      *(volatile unsigned char*)(FLASH_BASE+0x8000) = 0xFF;
+	*(volatile unsigned char *) pWritePtr = 0xFF;	//back to normal operation
+
+	/*
+	 * check if erase errors were reported
+	 */
+	if (c1 & 0x20) {
+		printk(KERN_ERR "flash_erase: err at %p\n", pWritePtr);
+
+		/*
+		 * reset error
+		 */
+		*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
+		return -2;
+	}
+
+	/*
+	 * just to make sure - verify if erased OK...
+	 */
+	msleep(10);
+
+	pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + (nBlock << 16)));
+
+	for (temp = 0; temp < 16 * 1024; temp++, pWritePtr += 4) {
+		if ((temp1 = *(volatile unsigned int *) pWritePtr) != 0xFFFFFFFF) {
+			printk(KERN_ERR "flash_erase: verify err at %p = %X\n",
+			       pWritePtr, temp1);
+			return -1;
+		}
+	}
+
+	return 0;
+
+}
+
+/*
+ * write_block will limit number of bytes written to the space in this block
+ */
+static int write_block(unsigned long p, const char __user *buf, int count)
+{
+	volatile unsigned int c1;
+	volatile unsigned int c2;
+	unsigned char *pWritePtr;
+	unsigned int uAddress;
+	unsigned int offset;
+	unsigned long timeout;
+	unsigned long timeout1;
+
+	/*
+	 * red LED == write
+	 */
+	leds_event(led_amber_off);
+	leds_event(led_red_on);
+
+	pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
+
+	/*
+	 * check if write will end in this block....
+	 */
+	offset = p & 0xFFFF;
+
+	if (offset + count > 0x10000)
+		count = 0x10000 - offset;
+
+	/*
+	 * wait up to 30 sec for this block
+	 */
+	timeout = jiffies + 30 * HZ;
+
+	for (offset = 0; offset < count; offset++, pWritePtr++) {
+		uAddress = (unsigned int) pWritePtr;
+		uAddress &= 0xFFFFFFFC;
+		if (__get_user(c2, buf + offset))
+			return -EFAULT;
+
+	  WriteRetry:
+	  	/*
+	  	 * dummy read
+	  	 */
+		c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
+
+		/*
+		 * kick open the write gate
+		 */
+		kick_open();
+
+		/*
+		 * program footbridge to the correct offset...0..3
+		 */
+		*CSR_ROMWRITEREG = (unsigned int) pWritePtr & 3;
+
+		/*
+		 * write cmd
+		 */
+		*(volatile unsigned char *) (uAddress) = 0x40;
+
+		/*
+		 * data to write
+		 */
+		*(volatile unsigned char *) (uAddress) = c2;
+
+		/*
+		 * get status
+		 */
+		*(volatile unsigned char *) (FLASH_BASE + 0x10000) = 0x70;
+
+		c1 = 0;
+
+		/*
+		 * wait up to 1 sec for this byte
+		 */
+		timeout1 = jiffies + 1 * HZ;
+
+		/*
+		 * while not ready...
+		 */
+		while (!(c1 & 0x80) && time_before(jiffies, timeout1))
+			c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
+
+		/*
+		 * if timeout getting status
+		 */
+		if (time_after_eq(jiffies, timeout1)) {
+			kick_open();
+			/*
+			 * reset err
+			 */
+			*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
+
+			goto WriteRetry;
+		}
+		/*
+		 * switch on read access, as a default flash operation mode
+		 */
+		kick_open();
+		/*
+		 * read access
+		 */
+		*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0xFF;
+
+		/*
+		 * if hardware reports an error writing, and not timeout - 
+		 * reset the chip and retry
+		 */
+		if (c1 & 0x10) {
+			kick_open();
+			/*
+			 * reset err
+			 */
+			*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
+
+			/*
+			 * before timeout?
+			 */
+			if (time_before(jiffies, timeout)) {
+				if (flashdebug)
+					printk(KERN_DEBUG "write_block: Retrying write at 0x%X)n",
+					       pWritePtr - FLASH_BASE);
+
+				/*
+				 * no LED == waiting
+				 */
+				leds_event(led_amber_off);
+				/*
+				 * wait couple ms
+				 */
+				msleep(10);
+				/*
+				 * red LED == write
+				 */
+				leds_event(led_red_on);
+
+				goto WriteRetry;
+			} else {
+				printk(KERN_ERR "write_block: timeout at 0x%X\n",
+				       pWritePtr - FLASH_BASE);
+				/*
+				 * return error -2
+				 */
+				return -2;
+
+			}
+		}
+	}
+
+	/*
+	 * green LED == read/verify
+	 */
+	leds_event(led_amber_off);
+	leds_event(led_green_on);
+
+	msleep(10);
+
+	pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
+
+	for (offset = 0; offset < count; offset++) {
+		char c, c1;
+		if (__get_user(c, buf))
+			return -EFAULT;
+		buf++;
+		if ((c1 = *pWritePtr++) != c) {
+			printk(KERN_ERR "write_block: verify error at 0x%X (%02X!=%02X)\n",
+			       pWritePtr - FLASH_BASE, c1, c);
+			return 0;
+		}
+	}
+
+	return count;
+}
+
+
+static void kick_open(void)
+{
+	unsigned long flags;
+
+	/*
+	 * we want to write a bit pattern XXX1 to Xilinx to enable
+	 * the write gate, which will be open for about the next 2ms.
+	 */
+	spin_lock_irqsave(&gpio_lock, flags);
+	cpld_modify(1, 1);
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	/*
+	 * let the ISA bus to catch on...
+	 */
+	udelay(25);
+}
+
+static struct file_operations flash_fops =
+{
+	.owner		= THIS_MODULE,
+	.llseek		= flash_llseek,
+	.read		= flash_read,
+	.write		= flash_write,
+	.ioctl		= flash_ioctl,
+};
+
+static struct miscdevice flash_miscdev =
+{
+	FLASH_MINOR,
+	"nwflash",
+	&flash_fops
+};
+
+static int __init nwflash_init(void)
+{
+	int ret = -ENODEV;
+
+	if (machine_is_netwinder()) {
+		int id;
+
+		FLASH_BASE = ioremap(DC21285_FLASH, KFLASH_SIZE4);
+		if (!FLASH_BASE)
+			goto out;
+
+		id = get_flash_id();
+		if ((id != KFLASH_ID) && (id != KFLASH_ID4)) {
+			ret = -ENXIO;
+			iounmap((void *)FLASH_BASE);
+			printk("Flash: incorrect ID 0x%04X.\n", id);
+			goto out;
+		}
+
+		printk("Flash ROM driver v.%s, flash device ID 0x%04X, size %d Mb.\n",
+		       NWFLASH_VERSION, id, gbFlashSize / (1024 * 1024));
+
+		ret = misc_register(&flash_miscdev);
+		if (ret < 0) {
+			iounmap((void *)FLASH_BASE);
+		}
+	}
+out:
+	return ret;
+}
+
+static void __exit nwflash_exit(void)
+{
+	misc_deregister(&flash_miscdev);
+	iounmap((void *)FLASH_BASE);
+}
+
+MODULE_LICENSE("GPL");
+
+module_param(flashdebug, bool, 0644);
+
+module_init(nwflash_init);
+module_exit(nwflash_exit);