Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (83 commits)
  mmc: fix compile error when CONFIG_BLOCK is not enabled
  mmc: core: Cleanup eMMC4.5 conditionals
  mmc: omap_hsmmc: if multiblock reads are broken, disable them
  mmc: core: add workaround for controllers with broken multiblock reads
  mmc: core: Prevent too long response times for suspend
  mmc: recognise SDIO cards with SDIO_CCCR_REV 3.00
  mmc: sd: Handle SD3.0 cards not supporting UHS-I bus speed mode
  mmc: core: support HPI send command
  mmc: core: Add cache control for eMMC4.5 device
  mmc: core: Modify the timeout value for writing power class
  mmc: core: new discard feature support at eMMC v4.5
  mmc: core: mmc sanitize feature support for v4.5
  mmc: dw_mmc: modify DATA register offset
  mmc: sdhci-pci: add flag for devices that can support runtime PM
  mmc: omap_hsmmc: ensure pbias configuration is always done
  mmc: core: Add Power Off Notify Feature eMMC 4.5
  mmc: sdhci-s3c: fix potential NULL dereference
  mmc: replace printk with appropriate display macro
  mmc: core: Add default timeout value for CMD6
  mmc: sdhci-pci: add runtime pm support
  ...

2 files changed, 34 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
new file mode 100644
index 000000000000..7e51154679a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
@@ -0,0 +1,27 @@
+* NVIDIA Tegra Secure Digital Host Controller
+
+This controller on Tegra family SoCs provides an interface for MMC, SD,
+and SDIO types of memory cards.
+
+Required properties:
+- compatible : Should be "nvidia,<chip>-sdhci"
+- reg : Should contain SD/MMC registers location and length
+- interrupts : Should contain SD/MMC interrupt
+
+Optional properties:
+- cd-gpios : Specify GPIOs for card detection
+- wp-gpios : Specify GPIOs for write protection
+- power-gpios : Specify GPIOs for power control
+- support-8bit : Boolean, indicates if 8-bit mode should be used.
+
+Example:
+
+sdhci@c8000200 {
+	compatible = "nvidia,tegra20-sdhci";
+	reg = <0xc8000200 0x200>;
+	interrupts = <47>;
+	cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+	wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+	power-gpios = <&gpio 155 0>; /* gpio PT3 */
+	support-8bit;
+};
diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt
index 82a5d250d75e..ba4be8b77093 100644
--- a/Documentation/fault-injection/fault-injection.txt
+++ b/Documentation/fault-injection/fault-injection.txt
@@ -21,6 +21,11 @@ o fail_make_request
   /sys/block/<device>/make-it-fail or
   /sys/block/<device>/<partition>/make-it-fail. (generic_make_request())
 
+o fail_mmc_request
+
+  injects MMC data errors on devices permitted by setting
+  debugfs entries under /sys/kernel/debug/mmc0/fail_mmc_request
+
 Configure fault-injection capabilities behavior
 -----------------------------------------------
 
@@ -115,7 +120,8 @@ use the boot option:
 
 	failslab=
 	fail_page_alloc=
-	fail_make_request=<interval>,<probability>,<space>,<times>
+	fail_make_request=
+	mmc_core.fail_request=<interval>,<probability>,<space>,<times>
 
 How to add new fault injection capability
 -----------------------------------------