diff options
Diffstat (limited to 'drivers/net/smc91x.c')
-rw-r--r-- | drivers/net/smc91x.c | 140 |
1 files changed, 129 insertions, 11 deletions
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index b215a8d85e62..fdcbaf8dfa73 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1614,7 +1614,7 @@ smc_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { strncpy(info->driver, CARDNAME, sizeof(info->driver)); strncpy(info->version, version, sizeof(info->version)); - strncpy(info->bus_info, dev->dev.parent->bus_id, sizeof(info->bus_info)); + strncpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info)); } static int smc_ethtool_nwayreset(struct net_device *dev) @@ -1643,6 +1643,117 @@ static void smc_ethtool_setmsglevel(struct net_device *dev, u32 level) lp->msg_enable = level; } +static int smc_write_eeprom_word(struct net_device *dev, u16 addr, u16 word) +{ + u16 ctl; + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + + spin_lock_irq(&lp->lock); + /* load word into GP register */ + SMC_SELECT_BANK(lp, 1); + SMC_SET_GP(lp, word); + /* set the address to put the data in EEPROM */ + SMC_SELECT_BANK(lp, 2); + SMC_SET_PTR(lp, addr); + /* tell it to write */ + SMC_SELECT_BANK(lp, 1); + ctl = SMC_GET_CTL(lp); + SMC_SET_CTL(lp, ctl | (CTL_EEPROM_SELECT | CTL_STORE)); + /* wait for it to finish */ + do { + udelay(1); + } while (SMC_GET_CTL(lp) & CTL_STORE); + /* clean up */ + SMC_SET_CTL(lp, ctl); + SMC_SELECT_BANK(lp, 2); + spin_unlock_irq(&lp->lock); + return 0; +} + +static int smc_read_eeprom_word(struct net_device *dev, u16 addr, u16 *word) +{ + u16 ctl; + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + + spin_lock_irq(&lp->lock); + /* set the EEPROM address to get the data from */ + SMC_SELECT_BANK(lp, 2); + SMC_SET_PTR(lp, addr | PTR_READ); + /* tell it to load */ + SMC_SELECT_BANK(lp, 1); + SMC_SET_GP(lp, 0xffff); /* init to known */ + ctl = SMC_GET_CTL(lp); + SMC_SET_CTL(lp, ctl | (CTL_EEPROM_SELECT | CTL_RELOAD)); + /* wait for it to finish */ + do { + udelay(1); + } while (SMC_GET_CTL(lp) & CTL_RELOAD); + /* read word from GP register */ + *word = SMC_GET_GP(lp); + /* clean up */ + SMC_SET_CTL(lp, ctl); + SMC_SELECT_BANK(lp, 2); + spin_unlock_irq(&lp->lock); + return 0; +} + +static int smc_ethtool_geteeprom_len(struct net_device *dev) +{ + return 0x23 * 2; +} + +static int smc_ethtool_geteeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + int i; + int imax; + + DBG(1, "Reading %d bytes at %d(0x%x)\n", + eeprom->len, eeprom->offset, eeprom->offset); + imax = smc_ethtool_geteeprom_len(dev); + for (i = 0; i < eeprom->len; i += 2) { + int ret; + u16 wbuf; + int offset = i + eeprom->offset; + if (offset > imax) + break; + ret = smc_read_eeprom_word(dev, offset >> 1, &wbuf); + if (ret != 0) + return ret; + DBG(2, "Read 0x%x from 0x%x\n", wbuf, offset >> 1); + data[i] = (wbuf >> 8) & 0xff; + data[i+1] = wbuf & 0xff; + } + return 0; +} + +static int smc_ethtool_seteeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + int i; + int imax; + + DBG(1, "Writing %d bytes to %d(0x%x)\n", + eeprom->len, eeprom->offset, eeprom->offset); + imax = smc_ethtool_geteeprom_len(dev); + for (i = 0; i < eeprom->len; i += 2) { + int ret; + u16 wbuf; + int offset = i + eeprom->offset; + if (offset > imax) + break; + wbuf = (data[i] << 8) | data[i + 1]; + DBG(2, "Writing 0x%x to 0x%x\n", wbuf, offset >> 1); + ret = smc_write_eeprom_word(dev, offset >> 1, wbuf); + if (ret != 0) + return ret; + } + return 0; +} + + static const struct ethtool_ops smc_ethtool_ops = { .get_settings = smc_ethtool_getsettings, .set_settings = smc_ethtool_setsettings, @@ -1652,8 +1763,22 @@ static const struct ethtool_ops smc_ethtool_ops = { .set_msglevel = smc_ethtool_setmsglevel, .nway_reset = smc_ethtool_nwayreset, .get_link = ethtool_op_get_link, -// .get_eeprom = smc_ethtool_geteeprom, -// .set_eeprom = smc_ethtool_seteeprom, + .get_eeprom_len = smc_ethtool_geteeprom_len, + .get_eeprom = smc_ethtool_geteeprom, + .set_eeprom = smc_ethtool_seteeprom, +}; + +static const struct net_device_ops smc_netdev_ops = { + .ndo_open = smc_open, + .ndo_stop = smc_close, + .ndo_start_xmit = smc_hard_start_xmit, + .ndo_tx_timeout = smc_timeout, + .ndo_set_multicast_list = smc_set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = smc_poll_controller, +#endif }; /* @@ -1865,16 +1990,9 @@ static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr, /* Fill in the fields of the device structure with ethernet values. */ ether_setup(dev); - dev->open = smc_open; - dev->stop = smc_close; - dev->hard_start_xmit = smc_hard_start_xmit; - dev->tx_timeout = smc_timeout; dev->watchdog_timeo = msecs_to_jiffies(watchdog); - dev->set_multicast_list = smc_set_multicast_list; + dev->netdev_ops = &smc_netdev_ops; dev->ethtool_ops = &smc_ethtool_ops; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = smc_poll_controller; -#endif tasklet_init(&lp->tx_task, smc_hardware_send_pkt, (unsigned long)dev); INIT_WORK(&lp->phy_configure, smc_phy_configure); |