diff options
author | Manfred Spraul <manfred@colorfullife.com> | 2019-05-14 15:46:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-05-14 19:52:52 -0700 |
commit | 99db46ea292780cd978d56932d9445b1e8bdafe8 (patch) | |
tree | a61a2121c48635478afb64875f8d8170c36bdfc0 /ipc | |
parent | 3278a2c20cb302d27e6f6ee45a3f57361176e426 (diff) | |
download | linux-rpi-99db46ea292780cd978d56932d9445b1e8bdafe8.tar.gz linux-rpi-99db46ea292780cd978d56932d9445b1e8bdafe8.tar.bz2 linux-rpi-99db46ea292780cd978d56932d9445b1e8bdafe8.zip |
ipc: do cyclic id allocation for the ipc object.
For ipcmni_extend mode, the sequence number space is only 7 bits. So
the chance of id reuse is relatively high compared with the non-extended
mode.
To alleviate this id reuse problem, this patch enables cyclic allocation
for the index to the radix tree (idx). The disadvantage is that this
can cause a slight slow-down of the fast path, as the radix tree could
be higher than necessary.
To limit the radix tree height, I have chosen the following limits:
1) The cycling is done over in_use*1.5.
2) At least, the cycling is done over
"normal" ipcnmi mode: RADIX_TREE_MAP_SIZE elements
"ipcmni_extended": 4096 elements
Result:
- for normal mode:
No change for <= 42 active ipc elements. With more than 42
active ipc elements, a 2nd level would be added to the radix
tree.
Without cyclic allocation, a 2nd level would be added only with
more than 63 active elements.
- for extended mode:
Cycling creates always at least a 2-level radix tree.
With more than 2730 active objects, a 3rd level would be
added, instead of > 4095 active objects until the 3rd level
is added without cyclic allocation.
For a 2-level radix tree compared to a 1-level radix tree, I have
observed < 1% performance impact.
Notes:
1) Normal "x=semget();y=semget();" is unaffected: Then the idx
is e.g. a and a+1, regardless if idr_alloc() or idr_alloc_cyclic()
is used.
2) The -1% happens in a microbenchmark after this situation:
x=semget();
for(i=0;i<4000;i++) {t=semget();semctl(t,0,IPC_RMID);}
y=semget();
Now perform semget calls on x and y that do not sleep.
3) The worst-case reuse cycle time is unfortunately unaffected:
If you have 2^24-1 ipc objects allocated, and get/remove the last
possible element in a loop, then the id is reused after 128
get/remove pairs.
Performance check:
A microbenchmark that performes no-op semop() randomly on two IDs,
with only these two IDs allocated.
The IDs were set using /proc/sys/kernel/sem_next_id.
The test was run 5 times, averages are shown.
1 & 2: Base (6.22 seconds for 10.000.000 semops)
1 & 40: -0.2%
1 & 3348: - 0.8%
1 & 27348: - 1.6%
1 & 15777204: - 3.2%
Or: ~12.6 cpu cycles per additional radix tree level.
The cpu is an Intel I3-5010U. ~1300 cpu cycles/syscall is slower
than what I remember (spectre impact?).
V2 of the patch:
- use "min" and "max"
- use RADIX_TREE_MAP_SIZE * RADIX_TREE_MAP_SIZE instead of
(2<<12).
[akpm@linux-foundation.org: fix max() warning]
Link: http://lkml.kernel.org/r/20190329204930.21620-3-longman@redhat.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Waiman Long <longman@redhat.com>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'ipc')
-rw-r--r-- | ipc/ipc_sysctl.c | 2 | ||||
-rw-r--r-- | ipc/util.c | 7 | ||||
-rw-r--r-- | ipc/util.h | 3 |
3 files changed, 11 insertions, 1 deletions
diff --git a/ipc/ipc_sysctl.c b/ipc/ipc_sysctl.c index 73b7782eccf4..bfaae457810c 100644 --- a/ipc/ipc_sysctl.c +++ b/ipc/ipc_sysctl.c @@ -122,6 +122,7 @@ static int one = 1; static int int_max = INT_MAX; int ipc_mni = IPCMNI; int ipc_mni_shift = IPCMNI_SHIFT; +int ipc_min_cycle = RADIX_TREE_MAP_SIZE; static struct ctl_table ipc_kern_table[] = { { @@ -252,6 +253,7 @@ static int __init ipc_mni_extend(char *str) { ipc_mni = IPCMNI_EXTEND; ipc_mni_shift = IPCMNI_EXTEND_SHIFT; + ipc_min_cycle = IPCMNI_EXTEND_MIN_CYCLE; pr_info("IPCMNI extended to %d.\n", ipc_mni); return 0; } diff --git a/ipc/util.c b/ipc/util.c index 71f3f3982fc8..d126d156efc6 100644 --- a/ipc/util.c +++ b/ipc/util.c @@ -220,9 +220,14 @@ static inline int ipc_idr_alloc(struct ipc_ids *ids, struct kern_ipc_perm *new) */ if (next_id < 0) { /* !CHECKPOINT_RESTORE or next_id is unset */ + int max_idx; + + max_idx = max(ids->in_use*3/2, ipc_min_cycle); + max_idx = min(max_idx, ipc_mni); /* allocate the idx, with a NULL struct kern_ipc_perm */ - idx = idr_alloc(&ids->ipcs_idr, NULL, 0, 0, GFP_NOWAIT); + idx = idr_alloc_cyclic(&ids->ipcs_idr, NULL, 0, max_idx, + GFP_NOWAIT); if (idx >= 0) { /* diff --git a/ipc/util.h b/ipc/util.h index 8c834ed39012..0fcf8e719b76 100644 --- a/ipc/util.h +++ b/ipc/util.h @@ -27,12 +27,14 @@ */ #define IPCMNI_SHIFT 15 #define IPCMNI_EXTEND_SHIFT 24 +#define IPCMNI_EXTEND_MIN_CYCLE (RADIX_TREE_MAP_SIZE * RADIX_TREE_MAP_SIZE) #define IPCMNI (1 << IPCMNI_SHIFT) #define IPCMNI_EXTEND (1 << IPCMNI_EXTEND_SHIFT) #ifdef CONFIG_SYSVIPC_SYSCTL extern int ipc_mni; extern int ipc_mni_shift; +extern int ipc_min_cycle; #define ipcmni_seq_shift() ipc_mni_shift #define IPCMNI_IDX_MASK ((1 << ipc_mni_shift) - 1) @@ -40,6 +42,7 @@ extern int ipc_mni_shift; #else /* CONFIG_SYSVIPC_SYSCTL */ #define ipc_mni IPCMNI +#define ipc_min_cycle ((int)RADIX_TREE_MAP_SIZE) #define ipcmni_seq_shift() IPCMNI_SHIFT #define IPCMNI_IDX_MASK ((1 << IPCMNI_SHIFT) - 1) #endif /* CONFIG_SYSVIPC_SYSCTL */ |