Merge tag 'i2c-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Core got a new helper 'i2c_client_get_device_id()', designware got
  some bigger updates, the rest is driver updates all over the place"

* tag 'i2c-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (41 commits)
  i2c: ismt: Fix an out-of-bounds bug in ismt_access()
  i2c: mux: reg: check return value after calling platform_get_resource()
  i2c: xiic: Make sure to disable clock on .remove()
  i2c: hisi: Add support to get clock frequency from clock
  i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
  i2c: slave-eeprom: Convert to i2c's .probe_new()
  i2c: mux: pca954x: Convert to i2c's .probe_new()
  drivers/i2c: use simple i2c probe
  i2c: mux: pca9541: switch to using .probe_new
  i2c: gpio: Fix potential unused warning for 'i2c_gpio_dt_ids'
  i2c: qcom-geni: add support for I2C Master Hub variant
  i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant
  soc: qcom: geni-se: add support for I2C Master Hub wrapper variant
  soc: qcom: geni-se: add desc struct to specify clocks from device match data
  dt-bindings: i2c: qcom-geni: document I2C Master Hub serial I2C engine
  dt-bindings: qcom: geni-se: document I2C Master Hub wrapper variant
  dt-bindings: i2c: renesas,riic: Document RZ/Five SoC
  i2c: tegra: Set ACPI node as primary fwnode
  i2c: smbus: add DDR support for SPD
  i2c: /pasemi: PASemi I2C controller IRQ enablement
  ...

34 files changed, 623 insertions, 327 deletions

diff --git a/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml b/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml
new file mode 100644
index 000000000000..7d7a8de7bcd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/hisilicon,ascend910-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon common I2C controller
+
+maintainers:
+  - Yicong Yang <yangyicong@hisilicon.com>
+
+description:
+  The HiSilicon common I2C controller can be used for many different
+  types of SoC such as Huawei Ascend AI series chips.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: hisilicon,ascend910-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 400000
+
+  i2c-sda-falling-time-ns:
+    default: 343
+
+  i2c-scl-falling-time-ns:
+    default: 203
+
+  i2c-sda-hold-time-ns:
+    default: 830
+
+  i2c-scl-rising-time-ns:
+    default: 365
+
+  i2c-digital-filter-width-ns:
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@38b0000 {
+      compatible = "hisilicon,ascend910-i2c";
+      reg = <0x38b0000 0x10000>;
+      interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+      i2c-sda-falling-time-ns = <56>;
+      i2c-scl-falling-time-ns = <56>;
+      i2c-sda-hold-time-ns = <56>;
+      i2c-scl-rising-time-ns = <56>;
+      i2c-digital-filter;
+      i2c-digital-filter-width-ns = <0x0>;
+      clocks = <&alg_clk>;
+      clock-frequency = <400000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
index 4e730fb7be56..421563bf576c 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
@@ -23,6 +23,7 @@ properties:
       - const: mediatek,mt6577-i2c
       - const: mediatek,mt6589-i2c
       - const: mediatek,mt7622-i2c
+      - const: mediatek,mt7986-i2c
       - const: mediatek,mt8168-i2c
       - const: mediatek,mt8173-i2c
       - const: mediatek,mt8183-i2c
diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
index 93c164aa00da..984fc1ed3ec6 100644
--- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -19,6 +19,7 @@ properties:
       - const: allwinner,sun6i-a31-i2c
       - items:
           - enum:
+              - allwinner,suniv-f1c100s-i2c
               - allwinner,sun8i-a23-i2c
               - allwinner,sun8i-a83t-i2c
               - allwinner,sun8i-v536-i2c
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
index 0e7ed00562e2..f5f7dc8f325c 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -10,18 +10,19 @@ maintainers:
   - Andy Gross <agross@kernel.org>
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
-allOf:
-  - $ref: /schemas/i2c/i2c-controller.yaml#
-
 properties:
   compatible:
-    const: qcom,geni-i2c
+    enum:
+      - qcom,geni-i2c
+      - qcom,geni-i2c-master-hub
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   clock-names:
-    const: se
+    minItems: 1
+    maxItems: 2
 
   clock-frequency:
     default: 100000
@@ -35,13 +36,12 @@ properties:
       - const: rx
 
   interconnects:
+    minItems: 2
     maxItems: 3
 
   interconnect-names:
-    items:
-      - const: qup-core
-      - const: qup-config
-      - const: qup-memory
+    minItems: 2
+    maxItems: 3
 
   interrupts:
     maxItems: 1
@@ -71,6 +71,50 @@ required:
   - clock-names
   - reg
 
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,geni-i2c-master-hub
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: se
+            - const: core
+
+        dmas: false
+        dma-names: false
+
+        interconnects:
+          maxItems: 2
+
+        interconnect-names:
+          items:
+            - const: qup-core
+            - const: qup-config
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          const: se
+
+        interconnects:
+          minItems: 3
+
+        interconnect-names:
+          items:
+            - const: qup-core
+            - const: qup-config
+            - const: qup-memory
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
index d3c0d5c427ac..2291a7cd619b 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
@@ -19,7 +19,7 @@ properties:
       - enum:
           - renesas,riic-r7s72100   # RZ/A1H
           - renesas,riic-r7s9210    # RZ/A2M
-          - renesas,riic-r9a07g043  # RZ/G2UL
+          - renesas,riic-r9a07g043  # RZ/G2UL and RZ/Five
           - renesas,riic-r9a07g044  # RZ/G2{L,LC}
           - renesas,riic-r9a07g054  # RZ/V2L
       - const: renesas,riic-rz      # RZ/A or RZ/G2L
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 2bf5293fc995..ab4df0205285 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -21,20 +21,19 @@ properties:
   compatible:
     enum:
       - qcom,geni-se-qup
+      - qcom,geni-se-i2c-master-hub
 
   reg:
     description: QUP wrapper common register address and length.
     maxItems: 1
 
   clock-names:
-    items:
-      - const: m-ahb
-      - const: s-ahb
+    minItems: 1
+    maxItems: 2
 
   clocks:
-    items:
-      - description: Master AHB Clock
-      - description: Slave AHB Clock
+    minItems: 1
+    maxItems: 2
 
   "#address-cells":
     const: 2
@@ -81,6 +80,39 @@ patternProperties:
     description: GENI Serial Engine based UART Controller.
     $ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,geni-se-i2c-master-hub
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: s-ahb
+
+        clocks:
+          items:
+            - description: Slave AHB Clock
+
+        iommus: false
+
+      patternProperties:
+        "spi@[0-9a-f]+$": false
+        "serial@[0-9a-f]+$": false
+    else:
+      properties:
+        clock-names:
+          items:
+            - const: m-ahb
+            - const: s-ahb
+
+        clocks:
+          items:
+            - description: Master AHB Clock
+            - description: Slave AHB Clock
+
 additionalProperties: false
 
 examples:
diff --git a/MAINTAINERS b/MAINTAINERS
index 4d75ffe9affa..fc4961b0b494 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9290,6 +9290,7 @@ M:	Yicong Yang <yangyicong@hisilicon.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 W:	https://www.hisilicon.com
+F:	Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml
 F:	drivers/i2c/busses/i2c-hisi.c
 
 HISILICON LPC BUS DRIVER
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e50f9603d189..a7bfddf08fa7 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -673,7 +673,7 @@ config I2C_HIGHLANDER
 
 config I2C_HISI
 	tristate "HiSilicon I2C controller"
-	depends on (ARM64 && ACPI) || COMPILE_TEST
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Say Y here if you want to have Hisilicon I2C controller support
 	  available on the Kunpeng Server.
diff --git a/drivers/i2c/busses/i2c-amd-mp2-pci.c b/drivers/i2c/busses/i2c-amd-mp2-pci.c
index f57077a7448d..143165300949 100644
--- a/drivers/i2c/busses/i2c-amd-mp2-pci.c
+++ b/drivers/i2c/busses/i2c-amd-mp2-pci.c
@@ -288,7 +288,7 @@ static void amd_mp2_clear_reg(struct amd_mp2_dev *privdata)
 static int amd_mp2_pci_init(struct amd_mp2_dev *privdata,
 			    struct pci_dev *pci_dev)
 {
-	int rc;
+	int irq_flag = 0, rc;
 
 	pci_set_drvdata(pci_dev, privdata);
 
@@ -311,17 +311,29 @@ static int amd_mp2_pci_init(struct amd_mp2_dev *privdata,
 	if (rc)
 		goto err_dma_mask;
 
-	/* Set up intx irq */
+	/* request and enable interrupt */
 	writel(0, privdata->mmio + AMD_P2C_MSG_INTEN);
-	pci_intx(pci_dev, 1);
-	rc = devm_request_irq(&pci_dev->dev, pci_dev->irq, amd_mp2_irq_isr,
-			      IRQF_SHARED, dev_name(&pci_dev->dev), privdata);
-	if (rc)
-		pci_err(pci_dev, "Failure requesting irq %i: %d\n",
-			pci_dev->irq, rc);
+	rc = pci_alloc_irq_vectors(pci_dev, 1, 1, PCI_IRQ_ALL_TYPES);
+	if (rc < 0) {
+		dev_err(&pci_dev->dev, "Failed to allocate single IRQ err=%d\n", rc);
+		goto err_dma_mask;
+	}
+
+	privdata->dev_irq = pci_irq_vector(pci_dev, 0);
+	if (!pci_dev->msix_enabled && !pci_dev->msi_enabled)
+		irq_flag = IRQF_SHARED;
+
+	rc = devm_request_irq(&pci_dev->dev, privdata->dev_irq,
+			      amd_mp2_irq_isr, irq_flag, dev_name(&pci_dev->dev), privdata);
+	if (rc) {
+		pci_err(pci_dev, "Failure requesting irq %i: %d\n", privdata->dev_irq, rc);
+		goto free_irq_vectors;
+	}
 
 	return rc;
 
+free_irq_vectors:
+	free_irq(privdata->dev_irq, privdata);
 err_dma_mask:
 	pci_clear_master(pci_dev);
 err_pci_enable:
@@ -364,7 +376,7 @@ static void amd_mp2_pci_remove(struct pci_dev *pci_dev)
 	pm_runtime_forbid(&pci_dev->dev);
 	pm_runtime_get_noresume(&pci_dev->dev);
 
-	pci_intx(pci_dev, 0);
+	free_irq(privdata->dev_irq, privdata);
 	pci_clear_master(pci_dev);
 
 	amd_mp2_clear_reg(privdata);
diff --git a/drivers/i2c/busses/i2c-amd-mp2.h b/drivers/i2c/busses/i2c-amd-mp2.h
index ddecd0c88656..018a42de8b1e 100644
--- a/drivers/i2c/busses/i2c-amd-mp2.h
+++ b/drivers/i2c/busses/i2c-amd-mp2.h
@@ -183,6 +183,7 @@ struct amd_mp2_dev {
 	struct mutex c2p_lock;
 	u8 c2p_lock_busid;
 	unsigned int probed;
+	int dev_irq;
 };
 
 /* PCIe communication driver */
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index c023b691441e..a3240ece55b2 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -625,10 +625,5 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)
 	i2c_dw_release_lock(dev);
 }
 
-void i2c_dw_disable_int(struct dw_i2c_dev *dev)
-{
-	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-}
-
 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
 MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 4d3a3b464ecd..95ebc5eaa5d1 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -18,12 +18,12 @@
 #include <linux/regmap.h>
 #include <linux/types.h>
 
-#define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C |			\
-					I2C_FUNC_SMBUS_BYTE |		\
-					I2C_FUNC_SMBUS_BYTE_DATA |	\
-					I2C_FUNC_SMBUS_WORD_DATA |	\
-					I2C_FUNC_SMBUS_BLOCK_DATA |	\
-					I2C_FUNC_SMBUS_I2C_BLOCK)
+#define DW_IC_DEFAULT_FUNCTIONALITY		(I2C_FUNC_I2C | \
+						 I2C_FUNC_SMBUS_BYTE | \
+						 I2C_FUNC_SMBUS_BYTE_DATA | \
+						 I2C_FUNC_SMBUS_WORD_DATA | \
+						 I2C_FUNC_SMBUS_BLOCK_DATA | \
+						 I2C_FUNC_SMBUS_I2C_BLOCK)
 
 #define DW_IC_CON_MASTER			BIT(0)
 #define DW_IC_CON_SPEED_STD			(1 << 1)
@@ -43,98 +43,98 @@
 /*
  * Registers offset
  */
-#define DW_IC_CON		0x00
-#define DW_IC_TAR		0x04
-#define DW_IC_SAR		0x08
-#define DW_IC_DATA_CMD		0x10
-#define DW_IC_SS_SCL_HCNT	0x14
-#define DW_IC_SS_SCL_LCNT	0x18
-#define DW_IC_FS_SCL_HCNT	0x1c
-#define DW_IC_FS_SCL_LCNT	0x20
-#define DW_IC_HS_SCL_HCNT	0x24
-#define DW_IC_HS_SCL_LCNT	0x28
-#define DW_IC_INTR_STAT		0x2c
-#define DW_IC_INTR_MASK		0x30
-#define DW_IC_RAW_INTR_STAT	0x34
-#define DW_IC_RX_TL		0x38
-#define DW_IC_TX_TL		0x3c
-#define DW_IC_CLR_INTR		0x40
-#define DW_IC_CLR_RX_UNDER	0x44
-#define DW_IC_CLR_RX_OVER	0x48
-#define DW_IC_CLR_TX_OVER	0x4c
-#define DW_IC_CLR_RD_REQ	0x50
-#define DW_IC_CLR_TX_ABRT	0x54
-#define DW_IC_CLR_RX_DONE	0x58
-#define DW_IC_CLR_ACTIVITY	0x5c
-#define DW_IC_CLR_STOP_DET	0x60
-#define DW_IC_CLR_START_DET	0x64
-#define DW_IC_CLR_GEN_CALL	0x68
-#define DW_IC_ENABLE		0x6c
-#define DW_IC_STATUS		0x70
-#define DW_IC_TXFLR		0x74
-#define DW_IC_RXFLR		0x78
-#define DW_IC_SDA_HOLD		0x7c
-#define DW_IC_TX_ABRT_SOURCE	0x80
-#define DW_IC_ENABLE_STATUS	0x9c
-#define DW_IC_CLR_RESTART_DET	0xa8
-#define DW_IC_COMP_PARAM_1	0xf4
-#define DW_IC_COMP_VERSION	0xf8
-#define DW_IC_SDA_HOLD_MIN_VERS	0x3131312A
-#define DW_IC_COMP_TYPE		0xfc
-#define DW_IC_COMP_TYPE_VALUE	0x44570140
-
-#define DW_IC_INTR_RX_UNDER	BIT(0)
-#define DW_IC_INTR_RX_OVER	BIT(1)
-#define DW_IC_INTR_RX_FULL	BIT(2)
-#define DW_IC_INTR_TX_OVER	BIT(3)
-#define DW_IC_INTR_TX_EMPTY	BIT(4)
-#define DW_IC_INTR_RD_REQ	BIT(5)
-#define DW_IC_INTR_TX_ABRT	BIT(6)
-#define DW_IC_INTR_RX_DONE	BIT(7)
-#define DW_IC_INTR_ACTIVITY	BIT(8)
-#define DW_IC_INTR_STOP_DET	BIT(9)
-#define DW_IC_INTR_START_DET	BIT(10)
-#define DW_IC_INTR_GEN_CALL	BIT(11)
-#define DW_IC_INTR_RESTART_DET	BIT(12)
-
-#define DW_IC_INTR_DEFAULT_MASK		(DW_IC_INTR_RX_FULL | \
-					 DW_IC_INTR_TX_ABRT | \
-					 DW_IC_INTR_STOP_DET)
-#define DW_IC_INTR_MASTER_MASK		(DW_IC_INTR_DEFAULT_MASK | \
-					 DW_IC_INTR_TX_EMPTY)
-#define DW_IC_INTR_SLAVE_MASK		(DW_IC_INTR_DEFAULT_MASK | \
-					 DW_IC_INTR_RX_DONE | \
-					 DW_IC_INTR_RX_UNDER | \
-					 DW_IC_INTR_RD_REQ)
-
-#define DW_IC_STATUS_ACTIVITY		BIT(0)
-#define DW_IC_STATUS_TFE		BIT(2)
-#define DW_IC_STATUS_MASTER_ACTIVITY	BIT(5)
-#define DW_IC_STATUS_SLAVE_ACTIVITY	BIT(6)
-
-#define DW_IC_SDA_HOLD_RX_SHIFT		16
-#define DW_IC_SDA_HOLD_RX_MASK		GENMASK(23, 16)
-
-#define DW_IC_ERR_TX_ABRT	0x1
-
-#define DW_IC_TAR_10BITADDR_MASTER	BIT(12)
+#define DW_IC_CON				0x00
+#define DW_IC_TAR				0x04
+#define DW_IC_SAR				0x08
+#define DW_IC_DATA_CMD				0x10
+#define DW_IC_SS_SCL_HCNT			0x14
+#define DW_IC_SS_SCL_LCNT			0x18
+#define DW_IC_FS_SCL_HCNT			0x1c
+#define DW_IC_FS_SCL_LCNT			0x20
+#define DW_IC_HS_SCL_HCNT			0x24
+#define DW_IC_HS_SCL_LCNT			0x28
+#define DW_IC_INTR_STAT				0x2c
+#define DW_IC_INTR_MASK				0x30
+#define DW_IC_RAW_INTR_STAT			0x34
+#define DW_IC_RX_TL				0x38
+#define DW_IC_TX_TL				0x3c
+#define DW_IC_CLR_INTR				0x40
+#define DW_IC_CLR_RX_UNDER			0x44
+#define DW_IC_CLR_RX_OVER			0x48
+#define DW_IC_CLR_TX_OVER			0x4c
+#define DW_IC_CLR_RD_REQ			0x50
+#define DW_IC_CLR_TX_ABRT			0x54
+#define DW_IC_CLR_RX_DONE			0x58
+#define DW_IC_CLR_ACTIVITY			0x5c
+#define DW_IC_CLR_STOP_DET			0x60
+#define DW_IC_CLR_START_DET			0x64
+#define DW_IC_CLR_GEN_CALL			0x68
+#define DW_IC_ENABLE				0x6c
+#define DW_IC_STATUS				0x70
+#define DW_IC_TXFLR				0x74
+#define DW_IC_RXFLR				0x78
+#define DW_IC_SDA_HOLD				0x7c
+#define DW_IC_TX_ABRT_SOURCE			0x80
+#define DW_IC_ENABLE_STATUS			0x9c
+#define DW_IC_CLR_RESTART_DET			0xa8
+#define DW_IC_COMP_PARAM_1			0xf4
+#define DW_IC_COMP_VERSION			0xf8
+#define DW_IC_SDA_HOLD_MIN_VERS			0x3131312A /* "111*" == v1.11* */
+#define DW_IC_COMP_TYPE				0xfc
+#define DW_IC_COMP_TYPE_VALUE			0x44570140 /* "DW" + 0x0140 */
+
+#define DW_IC_INTR_RX_UNDER			BIT(0)
+#define DW_IC_INTR_RX_OVER			BIT(1)
+#define DW_IC_INTR_RX_FULL			BIT(2)
+#define DW_IC_INTR_TX_OVER			BIT(3)
+#define DW_IC_INTR_TX_EMPTY			BIT(4)
+#define DW_IC_INTR_RD_REQ			BIT(5)
+#define DW_IC_INTR_TX_ABRT			BIT(6)
+#define DW_IC_INTR_RX_DONE			BIT(7)
+#define DW_IC_INTR_ACTIVITY			BIT(8)
+#define DW_IC_INTR_STOP_DET			BIT(9)
+#define DW_IC_INTR_START_DET			BIT(10)
+#define DW_IC_INTR_GEN_CALL			BIT(11)
+#define DW_IC_INTR_RESTART_DET			BIT(12)
+
+#define DW_IC_INTR_DEFAULT_MASK			(DW_IC_INTR_RX_FULL | \
+						 DW_IC_INTR_TX_ABRT | \
+						 DW_IC_INTR_STOP_DET)
+#define DW_IC_INTR_MASTER_MASK			(DW_IC_INTR_DEFAULT_MASK | \
+						 DW_IC_INTR_TX_EMPTY)
+#define DW_IC_INTR_SLAVE_MASK			(DW_IC_INTR_DEFAULT_MASK | \
+						 DW_IC_INTR_RX_UNDER | \
+						 DW_IC_INTR_RD_REQ)
+
+#define DW_IC_STATUS_ACTIVITY			BIT(0)
+#define DW_IC_STATUS_TFE			BIT(2)
+#define DW_IC_STATUS_RFNE			BIT(3)
+#define DW_IC_STATUS_MASTER_ACTIVITY		BIT(5)
+#define DW_IC_STATUS_SLAVE_ACTIVITY		BIT(6)
+
+#define DW_IC_SDA_HOLD_RX_SHIFT			16
+#define DW_IC_SDA_HOLD_RX_MASK			GENMASK(23, 16)
+
+#define DW_IC_ERR_TX_ABRT			0x1
+
+#define DW_IC_TAR_10BITADDR_MASTER		BIT(12)
 
 #define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH	(BIT(2) | BIT(3))
 #define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK	GENMASK(3, 2)
 
 /*
- * status codes
+ * Sofware status flags
  */
-#define STATUS_IDLE			0x0
-#define STATUS_ACTIVE			0x1
-#define STATUS_WRITE_IN_PROGRESS	0x2
-#define STATUS_READ_IN_PROGRESS		0x4
+#define STATUS_ACTIVE				BIT(0)
+#define STATUS_WRITE_IN_PROGRESS		BIT(1)
+#define STATUS_READ_IN_PROGRESS			BIT(2)
+#define STATUS_MASK				GENMASK(2, 0)
 
 /*
  * operation modes
  */
-#define DW_IC_MASTER		0
-#define DW_IC_SLAVE		1
+#define DW_IC_MASTER				0
+#define DW_IC_SLAVE				1
 
 /*
  * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
@@ -142,20 +142,20 @@
  * Only expected abort codes are listed here
  * refer to the datasheet for the full list
  */
-#define ABRT_7B_ADDR_NOACK	0
-#define ABRT_10ADDR1_NOACK	1
-#define ABRT_10ADDR2_NOACK	2
-#define ABRT_TXDATA_NOACK	3
-#define ABRT_GCALL_NOACK	4
-#define ABRT_GCALL_READ		5
-#define ABRT_SBYTE_ACKDET	7
-#define ABRT_SBYTE_NORSTRT	9
-#define ABRT_10B_RD_NORSTRT	10
-#define ABRT_MASTER_DIS		11
-#define ARB_LOST		12
-#define ABRT_SLAVE_FLUSH_TXFIFO	13
-#define ABRT_SLAVE_ARBLOST	14
-#define ABRT_SLAVE_RD_INTX	15
+#define ABRT_7B_ADDR_NOACK			0
+#define ABRT_10ADDR1_NOACK			1
+#define ABRT_10ADDR2_NOACK			2
+#define ABRT_TXDATA_NOACK			3
+#define ABRT_GCALL_NOACK			4
+#define ABRT_GCALL_READ				5
+#define ABRT_SBYTE_ACKDET			7
+#define ABRT_SBYTE_NORSTRT			9
+#define ABRT_10B_RD_NORSTRT			10
+#define ABRT_MASTER_DIS				11
+#define ARB_LOST				12
+#define ABRT_SLAVE_FLUSH_TXFIFO			13
+#define ABRT_SLAVE_ARBLOST			14
+#define ABRT_SLAVE_RD_INTX			15
 
 #define DW_IC_TX_ABRT_7B_ADDR_NOACK		BIT(ABRT_7B_ADDR_NOACK)
 #define DW_IC_TX_ABRT_10ADDR1_NOACK		BIT(ABRT_10ADDR1_NOACK)
@@ -172,11 +172,11 @@
 #define DW_IC_RX_ABRT_SLAVE_ARBLOST		BIT(ABRT_SLAVE_ARBLOST)
 #define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO	BIT(ABRT_SLAVE_FLUSH_TXFIFO)
 
-#define DW_IC_TX_ABRT_NOACK		(DW_IC_TX_ABRT_7B_ADDR_NOACK | \
-					 DW_IC_TX_ABRT_10ADDR1_NOACK | \
-					 DW_IC_TX_ABRT_10ADDR2_NOACK | \
-					 DW_IC_TX_ABRT_TXDATA_NOACK | \
-					 DW_IC_TX_ABRT_GCALL_NOACK)
+#define DW_IC_TX_ABRT_NOACK			(DW_IC_TX_ABRT_7B_ADDR_NOACK | \
+						 DW_IC_TX_ABRT_10ADDR1_NOACK | \
+						 DW_IC_TX_ABRT_10ADDR2_NOACK | \
+						 DW_IC_TX_ABRT_TXDATA_NOACK | \
+						 DW_IC_TX_ABRT_GCALL_NOACK)
 
 struct clk;
 struct device;
@@ -232,7 +232,6 @@ struct reset_control;
  *	-1 if there is no semaphore.
  * @shared_with_punit: true if this bus is shared with the SoCs PUNIT
  * @disable: function to disable the controller
- * @disable_int: function to disable all interrupts
  * @init: function to initialize the I2C hardware
  * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing
  * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
@@ -290,28 +289,27 @@ struct dw_i2c_dev {
 	int			semaphore_idx;
 	bool			shared_with_punit;
 	void			(*disable)(struct dw_i2c_dev *dev);
-	void			(*disable_int)(struct dw_i2c_dev *dev);
 	int			(*init)(struct dw_i2c_dev *dev);
 	int			(*set_sda_hold_time)(struct dw_i2c_dev *dev);
 	int			mode;
 	struct i2c_bus_recovery_info rinfo;
 };
 
-#define ACCESS_INTR_MASK	BIT(0)
-#define ACCESS_NO_IRQ_SUSPEND	BIT(1)
-#define ARBITRATION_SEMAPHORE	BIT(2)
+#define ACCESS_INTR_MASK			BIT(0)
+#define ACCESS_NO_IRQ_SUSPEND			BIT(1)
+#define ARBITRATION_SEMAPHORE			BIT(2)
 
-#define MODEL_MSCC_OCELOT	BIT(8)
-#define MODEL_BAIKAL_BT1	BIT(9)
-#define MODEL_AMD_NAVI_GPU	BIT(10)
-#define MODEL_MASK		GENMASK(11, 8)
+#define MODEL_MSCC_OCELOT			BIT(8)
+#define MODEL_BAIKAL_BT1			BIT(9)
+#define MODEL_AMD_NAVI_GPU			BIT(10)
+#define MODEL_MASK				GENMASK(11, 8)
 
 /*
  * Enable UCSI interrupt by writing 0xd at register
  * offset 0x474 specified in hardware specification.
  */
-#define AMD_UCSI_INTR_REG	0x474
-#define AMD_UCSI_INTR_EN	0xd
+#define AMD_UCSI_INTR_REG			0x474
+#define AMD_UCSI_INTR_EN			0xd
 
 struct i2c_dw_semaphore_callbacks {
 	int	(*probe)(struct dw_i2c_dev *dev);
@@ -331,7 +329,6 @@ int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev);
 int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev);
 u32 i2c_dw_func(struct i2c_adapter *adap);
 void i2c_dw_disable(struct dw_i2c_dev *dev);
-void i2c_dw_disable_int(struct dw_i2c_dev *dev);
 
 static inline void __i2c_dw_enable(struct dw_i2c_dev *dev)
 {
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index dc3c5a15a95b..45f569155bfe 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -239,7 +239,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 		     msgs[dev->msg_write_idx].addr | ic_tar);
 
 	/* Enforce disabled interrupts (due to HW issues) */
-	i2c_dw_disable_int(dev);
+	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 
 	/* Enable the adapter */
 	__i2c_dw_enable(dev);
@@ -299,7 +299,7 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	dev->msgs = msgs;
 	dev->msgs_num = num_msgs;
 	i2c_dw_xfer_init(dev);
-	i2c_dw_disable_int(dev);
+	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 
 	/* Initiate messages read/write transaction */
 	for (msg_wrt_idx = 0; msg_wrt_idx < num_msgs; msg_wrt_idx++) {
@@ -574,7 +574,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	dev->msg_write_idx = 0;
 	dev->msg_read_idx = 0;
 	dev->msg_err = 0;
-	dev->status = STATUS_IDLE;
+	dev->status = 0;
 	dev->abort_source = 0;
 	dev->rx_outstanding = 0;
 
@@ -711,9 +711,18 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
  * Interrupt service routine. This gets called whenever an I2C master interrupt
  * occurs.
  */
-static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
+static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 {
-	u32 stat;
+	struct dw_i2c_dev *dev = dev_id;
+	u32 stat, enabled;
+
+	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
+	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
+	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
+		return IRQ_NONE;
+	if (pm_runtime_suspended(dev->dev) || stat == GENMASK(31, 0))
+		return IRQ_NONE;
+	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
 
 	stat = i2c_dw_read_clear_intrbits(dev);
 
@@ -726,12 +735,12 @@ static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
 		 * the HW active).
 		 */
 		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
-		return 0;
+		return IRQ_HANDLED;
 	}
 
 	if (stat & DW_IC_INTR_TX_ABRT) {
 		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
-		dev->status = STATUS_IDLE;
+		dev->status &= ~STATUS_MASK;
 		dev->rx_outstanding = 0;
 
 		/*
@@ -761,26 +770,10 @@ tx_aborted:
 	else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
 		/* Workaround to trigger pending interrupt */
 		regmap_read(dev->map, DW_IC_INTR_MASK, &stat);
-		i2c_dw_disable_int(dev);
+		regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 		regmap_write(dev->map, DW_IC_INTR_MASK, stat);
 	}
 
-	return 0;
-}
-
-static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
-{
-	struct dw_i2c_dev *dev = dev_id;
-	u32 stat, enabled;
-
-	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
-	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat);
-	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
-	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
-		return IRQ_NONE;
-
-	i2c_dw_irq_handler_master(dev);
-
 	return IRQ_HANDLED;
 }
 
@@ -878,7 +871,6 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 
 	dev->init = i2c_dw_init_master;
 	dev->disable = i2c_dw_disable;
-	dev->disable_int = i2c_dw_disable_int;
 
 	ret = i2c_dw_init_regmap(dev);
 	if (ret)
@@ -917,7 +909,7 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 	if (ret)
 		return ret;
 
-	i2c_dw_disable_int(dev);
+	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 	i2c_dw_release_lock(dev);
 
 	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index 0d15f4c1e9f7..c6d2e4c2ac23 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -78,13 +78,7 @@ static int i2c_dw_reg_slave(struct i2c_client *slave)
 
 	__i2c_dw_enable(dev);
 
-	dev->cmd_err = 0;
-	dev->msg_write_idx = 0;
-	dev->msg_read_idx = 0;
-	dev->msg_err = 0;
-	dev->status = STATUS_IDLE;
-	dev->abort_source = 0;
-	dev->rx_outstanding = 0;
+	dev->status = 0;
 
 	return 0;
 }
@@ -93,7 +87,7 @@ static int i2c_dw_unreg_slave(struct i2c_client *slave)
 {
 	struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
 
-	dev->disable_int(dev);
+	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 	dev->disable(dev);
 	synchronize_irq(dev->irq);
 	dev->slave = NULL;
@@ -153,9 +147,9 @@ static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev)
  * Interrupt service routine. This gets called whenever an I2C slave interrupt
  * occurs.
  */
-
-static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
+static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
 {
+	struct dw_i2c_dev *dev = dev_id;
 	u32 raw_stat, stat, enabled, tmp;
 	u8 val = 0, slave_activity;
 
@@ -165,7 +159,7 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 	slave_activity = ((tmp & DW_IC_STATUS_SLAVE_ACTIVITY) >> 6);
 
 	if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY) || !dev->slave)
-		return 0;
+		return IRQ_NONE;
 
 	stat = i2c_dw_read_clear_intrbits_slave(dev);
 	dev_dbg(dev->dev,
@@ -173,55 +167,45 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 		enabled, slave_activity, raw_stat, stat);
 
 	if (stat & DW_IC_INTR_RX_FULL) {
-		if (dev->status != STATUS_WRITE_IN_PROGRESS) {
-			dev->status = STATUS_WRITE_IN_PROGRESS;
+		if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
+			dev->status |= STATUS_WRITE_IN_PROGRESS;
+			dev->status &= ~STATUS_READ_IN_PROGRESS;
 			i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_REQUESTED,
 					&val);
 		}
 
-		regmap_read(dev->map, DW_IC_DATA_CMD, &tmp);
-		val = tmp;
-		if (!i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED,
-				     &val))
-			dev_vdbg(dev->dev, "Byte %X acked!", val);
+		do {
+			regmap_read(dev->map, DW_IC_DATA_CMD, &tmp);
+			val = tmp;
+			i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED,
+					&val);
+			regmap_read(dev->map, DW_IC_STATUS, &tmp);
+		} while (tmp & DW_IC_STATUS_RFNE);
 	}
 
 	if (stat & DW_IC_INTR_RD_REQ) {
 		if (slave_activity) {
 			regmap_read(dev->map, DW_IC_CLR_RD_REQ, &tmp);
 
-			dev->status = STATUS_READ_IN_PROGRESS;
-			if (!i2c_slave_event(dev->slave,
-					     I2C_SLAVE_READ_REQUESTED,
-					     &val))
-				regmap_write(dev->map, DW_IC_DATA_CMD, val);
+			if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
+				i2c_slave_event(dev->slave,
+						I2C_SLAVE_READ_REQUESTED,
+						&val);
+				dev->status |= STATUS_READ_IN_PROGRESS;
+				dev->status &= ~STATUS_WRITE_IN_PROGRESS;
+			} else {
+				i2c_slave_event(dev->slave,
+						I2C_SLAVE_READ_PROCESSED,
+						&val);
+			}
+			regmap_write(dev->map, DW_IC_DATA_CMD, val);
 		}
 	}
 
-	if (stat & DW_IC_INTR_RX_DONE) {
-		if (!i2c_slave_event(dev->slave, I2C_SLAVE_READ_PROCESSED,
-				     &val))
-			regmap_read(dev->map, DW_IC_CLR_RX_DONE, &tmp);
-	}
-
-	if (stat & DW_IC_INTR_STOP_DET) {
-		dev->status = STATUS_IDLE;
+	if (stat & DW_IC_INTR_STOP_DET)
 		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
-	}
 
-	return 1;
-}
-
-static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
-{
-	struct dw_i2c_dev *dev = dev_id;
-	int ret;
-
-	ret = i2c_dw_irq_handler_slave(dev);
-	if (ret > 0)
-		complete(&dev->cmd_complete);
-
-	return IRQ_RETVAL(ret);
+	return IRQ_HANDLED;
 }
 
 static const struct i2c_algorithm i2c_dw_algo = {
@@ -246,11 +230,8 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
 	struct i2c_adapter *adap = &dev->adapter;
 	int ret;
 
-	init_completion(&dev->cmd_complete);
-
 	dev->init = i2c_dw_init_slave;
 	dev->disable = i2c_dw_disable;
-	dev->disable_int = i2c_dw_disable_int;
 
 	ret = i2c_dw_init_regmap(dev);
 	if (ret)
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index b1985c1667e1..0e4385a9bcf7 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -482,19 +482,17 @@ static int i2c_gpio_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#if defined(CONFIG_OF)
 static const struct of_device_id i2c_gpio_dt_ids[] = {
 	{ .compatible = "i2c-gpio", },
 	{ /* sentinel */ }
 };
 
 MODULE_DEVICE_TABLE(of, i2c_gpio_dt_ids);
-#endif
 
 static struct platform_driver i2c_gpio_driver = {
 	.driver		= {
 		.name	= "i2c-gpio",
-		.of_match_table	= of_match_ptr(i2c_gpio_dt_ids),
+		.of_match_table	= i2c_gpio_dt_ids,
 	},
 	.probe		= i2c_gpio_probe,
 	.remove		= i2c_gpio_remove,
diff --git a/drivers/i2c/busses/i2c-hisi.c b/drivers/i2c/busses/i2c-hisi.c
index 76c3d8f6fc3c..8c6c7075c765 100644
--- a/drivers/i2c/busses/i2c-hisi.c
+++ b/drivers/i2c/busses/i2c-hisi.c
@@ -7,6 +7,7 @@
 
 #include <linux/bits.h>
 #include <linux/bitfield.h>
+#include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
@@ -88,6 +89,7 @@ struct hisi_i2c_controller {
 	struct i2c_adapter adapter;
 	void __iomem *iobase;
 	struct device *dev;
+	struct clk *clk;
 	int irq;
 
 	/* Intermediates for recording the transfer process */
@@ -454,10 +456,15 @@ static int hisi_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = device_property_read_u64(dev, "clk_rate", &clk_rate_hz);
-	if (ret) {
-		dev_err(dev, "failed to get clock frequency, ret = %d\n", ret);
-		return ret;
+	ctlr->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
+	if (IS_ERR_OR_NULL(ctlr->clk)) {
+		ret = device_property_read_u64(dev, "clk_rate", &clk_rate_hz);
+		if (ret) {
+			dev_err(dev, "failed to get clock frequency, ret = %d\n", ret);
+			return ret;
+		}
+	} else {
+		clk_rate_hz = clk_get_rate(ctlr->clk);
 	}
 
 	ctlr->clk_rate_khz = DIV_ROUND_UP_ULL(clk_rate_hz, HZ_PER_KHZ);
@@ -489,11 +496,18 @@ static const struct acpi_device_id hisi_i2c_acpi_ids[] = {
 };
 MODULE_DEVICE_TABLE(acpi, hisi_i2c_acpi_ids);
 
+static const struct of_device_id hisi_i2c_dts_ids[] = {
+	{ .compatible = "hisilicon,ascend910-i2c", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, hisi_i2c_dts_ids);
+
 static struct platform_driver hisi_i2c_driver = {
 	.probe		= hisi_i2c_probe,
 	.driver		= {
 		.name	= "hisi-i2c",
 		.acpi_match_table = hisi_i2c_acpi_ids,
+		.of_match_table = hisi_i2c_dts_ids,
 	},
 };
 module_platform_driver(hisi_i2c_driver);
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index fc70920c4dda..cf5bacf3a488 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1451,8 +1451,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
+	base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index fe2349590f75..c74985d77b0e 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -509,6 +509,9 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 		if (read_write == I2C_SMBUS_WRITE) {
 			/* Block Write */
 			dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA:  WRITE\n");
+			if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+				return -EINVAL;
+
 			dma_size = data->block[0] + 1;
 			dma_direction = DMA_TO_DEVICE;
 			desc->wr_len_cmd = dma_size;
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index fc7bfd98156b..d80e59340d97 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -431,6 +431,19 @@ static const struct mtk_i2c_compatible mt8168_compat = {
 	.max_dma_support = 33,
 };
 
+static const struct mtk_i2c_compatible mt7986_compat = {
+	.quirks = &mt7622_i2c_quirks,
+	.regs = mt_i2c_regs_v1,
+	.pmic_i2c = 0,
+	.dcm = 1,
+	.auto_restart = 1,
+	.aux_len_reg = 1,
+	.timing_adjust = 0,
+	.dma_sync = 1,
+	.ltiming_adjust = 0,
+	.max_dma_support = 32,
+};
+
 static const struct mtk_i2c_compatible mt8173_compat = {
 	.regs = mt_i2c_regs_v1,
 	.pmic_i2c = 0,
@@ -503,6 +516,7 @@ static const struct of_device_id mtk_i2c_of_match[] = {
 	{ .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat },
 	{ .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
 	{ .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
+	{ .compatible = "mediatek,mt7986-i2c", .data = &mt7986_compat },
 	{ .compatible = "mediatek,mt8168-i2c", .data = &mt8168_compat },
 	{ .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
 	{ .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index 83457359ec45..38d5864d0cb5 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -106,7 +106,7 @@ enum i2c_addr {
 #define NPCM_I2CCST3			0x19
 #define I2C_VER				0x1F
 
-/*BANK0 regs*/
+/* BANK 0 regs */
 #define NPCM_I2CADDR3			0x10
 #define NPCM_I2CADDR7			0x11
 #define NPCM_I2CADDR4			0x12
@@ -115,6 +115,20 @@ enum i2c_addr {
 #define NPCM_I2CADDR9			0x15
 #define NPCM_I2CADDR6			0x16
 #define NPCM_I2CADDR10			0x17
+#define NPCM_I2CCTL4			0x1A
+#define NPCM_I2CCTL5			0x1B
+#define NPCM_I2CSCLLT			0x1C /* SCL Low Time */
+#define NPCM_I2CFIF_CTL			0x1D /* FIFO Control */
+#define NPCM_I2CSCLHT			0x1E /* SCL High Time */
+
+/* BANK 1 regs */
+#define NPCM_I2CFIF_CTS			0x10 /* Both FIFOs Control and Status */
+#define NPCM_I2CTXF_CTL			0x12 /* Tx-FIFO Control */
+#define NPCM_I2CT_OUT			0x14 /* Bus T.O. */
+#define NPCM_I2CPEC			0x16 /* PEC Data */
+#define NPCM_I2CTXF_STS			0x1A /* Tx-FIFO Status */
+#define NPCM_I2CRXF_STS			0x1C /* Rx-FIFO Status */
+#define NPCM_I2CRXF_CTL			0x1E /* Rx-FIFO Control */
 
 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 /*
@@ -131,66 +145,51 @@ static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = {
 };
 #endif
 
-#define NPCM_I2CCTL4			0x1A
-#define NPCM_I2CCTL5			0x1B
-#define NPCM_I2CSCLLT			0x1C /* SCL Low Time */
-#define NPCM_I2CFIF_CTL			0x1D /* FIFO Control */
-#define NPCM_I2CSCLHT			0x1E /* SCL High Time */
-
-/* BANK 1 regs */
-#define NPCM_I2CFIF_CTS			0x10 /* Both FIFOs Control and Status */
-#define NPCM_I2CTXF_CTL			0x12 /* Tx-FIFO Control */
-#define NPCM_I2CT_OUT			0x14 /* Bus T.O. */
-#define NPCM_I2CPEC			0x16 /* PEC Data */
-#define NPCM_I2CTXF_STS			0x1A /* Tx-FIFO Status */
-#define NPCM_I2CRXF_STS			0x1C /* Rx-FIFO Status */
-#define NPCM_I2CRXF_CTL			0x1E /* Rx-FIFO Control */
-
 /* NPCM_I2CST reg fields */
-#define NPCM_I2CST_XMIT			BIT(0)
-#define NPCM_I2CST_MASTER		BIT(1)
-#define NPCM_I2CST_NMATCH		BIT(2)
-#define NPCM_I2CST_STASTR		BIT(3)
-#define NPCM_I2CST_NEGACK		BIT(4)
-#define NPCM_I2CST_BER			BIT(5)
-#define NPCM_I2CST_SDAST		BIT(6)
-#define NPCM_I2CST_SLVSTP		BIT(7)
+#define NPCM_I2CST_XMIT			BIT(0)	/* Transmit mode */
+#define NPCM_I2CST_MASTER		BIT(1)	/* Master mode */
+#define NPCM_I2CST_NMATCH		BIT(2)	/* New match */
+#define NPCM_I2CST_STASTR		BIT(3)	/* Stall after start */
+#define NPCM_I2CST_NEGACK		BIT(4)	/* Negative ACK */
+#define NPCM_I2CST_BER			BIT(5)	/* Bus error */
+#define NPCM_I2CST_SDAST		BIT(6)	/* SDA status */
+#define NPCM_I2CST_SLVSTP		BIT(7)	/* Slave stop */
 
 /* NPCM_I2CCST reg fields */
-#define NPCM_I2CCST_BUSY		BIT(0)
-#define NPCM_I2CCST_BB			BIT(1)
-#define NPCM_I2CCST_MATCH		BIT(2)
-#define NPCM_I2CCST_GCMATCH		BIT(3)
-#define NPCM_I2CCST_TSDA		BIT(4)
-#define NPCM_I2CCST_TGSCL		BIT(5)
-#define NPCM_I2CCST_MATCHAF		BIT(6)
-#define NPCM_I2CCST_ARPMATCH		BIT(7)
+#define NPCM_I2CCST_BUSY		BIT(0)	/* Busy */
+#define NPCM_I2CCST_BB			BIT(1)	/* Bus busy */
+#define NPCM_I2CCST_MATCH		BIT(2)	/* Address match */
+#define NPCM_I2CCST_GCMATCH		BIT(3)	/* Global call match */
+#define NPCM_I2CCST_TSDA		BIT(4)	/* Test SDA line */
+#define NPCM_I2CCST_TGSCL		BIT(5)	/* Toggle SCL line */
+#define NPCM_I2CCST_MATCHAF		BIT(6)	/* Match address field */
+#define NPCM_I2CCST_ARPMATCH		BIT(7)	/* ARP address match */
 
 /* NPCM_I2CCTL1 reg fields */
-#define NPCM_I2CCTL1_START		BIT(0)
-#define NPCM_I2CCTL1_STOP		BIT(1)
-#define NPCM_I2CCTL1_INTEN		BIT(2)
+#define NPCM_I2CCTL1_START		BIT(0)	/* Generate start condition */
+#define NPCM_I2CCTL1_STOP		BIT(1)	/* Generate stop condition */
+#define NPCM_I2CCTL1_INTEN		BIT(2)	/* Interrupt enable */
 #define NPCM_I2CCTL1_EOBINTE		BIT(3)
 #define NPCM_I2CCTL1_ACK		BIT(4)
-#define NPCM_I2CCTL1_GCMEN		BIT(5)
-#define NPCM_I2CCTL1_NMINTE		BIT(6)
-#define NPCM_I2CCTL1_STASTRE		BIT(7)
+#define NPCM_I2CCTL1_GCMEN		BIT(5)	/* Global call match enable */
+#define NPCM_I2CCTL1_NMINTE		BIT(6)	/* New match interrupt enable */
+#define NPCM_I2CCTL1_STASTRE		BIT(7)	/* Stall after start enable */
 
 /* RW1S fields (inside a RW reg): */
 #define NPCM_I2CCTL1_RWS   \
 	(NPCM_I2CCTL1_START | NPCM_I2CCTL1_STOP | NPCM_I2CCTL1_ACK)
 
 /* npcm_i2caddr reg fields */
-#define NPCM_I2CADDR_A			GENMASK(6, 0)
-#define NPCM_I2CADDR_SAEN		BIT(7)
+#define NPCM_I2CADDR_A			GENMASK(6, 0)	/* Address */
+#define NPCM_I2CADDR_SAEN		BIT(7)		/* Slave address enable */
 
 /* NPCM_I2CCTL2 reg fields */
-#define I2CCTL2_ENABLE			BIT(0)
-#define I2CCTL2_SCLFRQ6_0		GENMASK(7, 1)
+#define I2CCTL2_ENABLE			BIT(0)		/* Module enable */
+#define I2CCTL2_SCLFRQ6_0		GENMASK(7, 1)	/* Bits 0:6 of frequency divisor */
 
 /* NPCM_I2CCTL3 reg fields */
-#define I2CCTL3_SCLFRQ8_7		GENMASK(1, 0)
-#define I2CCTL3_ARPMEN			BIT(2)
+#define I2CCTL3_SCLFRQ8_7		GENMASK(1, 0)	/* Bits 7:8 of frequency divisor */
+#define I2CCTL3_ARPMEN			BIT(2)	/* ARP match enable */
 #define I2CCTL3_IDL_START		BIT(3)
 #define I2CCTL3_400K_MODE		BIT(4)
 #define I2CCTL3_BNK_SEL			BIT(5)
diff --git a/drivers/i2c/busses/i2c-pasemi-core.c b/drivers/i2c/busses/i2c-pasemi-core.c
index 9028ffb58cc0..7d54a9f34c74 100644
--- a/drivers/i2c/busses/i2c-pasemi-core.c
+++ b/drivers/i2c/busses/i2c-pasemi-core.c
@@ -21,6 +21,7 @@
 #define REG_MTXFIFO	0x00
 #define REG_MRXFIFO	0x04
 #define REG_SMSTA	0x14
+#define REG_IMASK	0x18
 #define REG_CTL		0x1c
 #define REG_REV		0x28
 
@@ -66,6 +67,7 @@ static void pasemi_reset(struct pasemi_smbus *smbus)
 		val |= CTL_EN;
 
 	reg_write(smbus, REG_CTL, val);
+	reinit_completion(&smbus->irq_completion);
 }
 
 static void pasemi_smb_clear(struct pasemi_smbus *smbus)
@@ -78,14 +80,21 @@ static void pasemi_smb_clear(struct pasemi_smbus *smbus)
 
 static int pasemi_smb_waitready(struct pasemi_smbus *smbus)
 {
-	int timeout = 10;
+	int timeout = 100;
 	unsigned int status;
 
-	status = reg_read(smbus, REG_SMSTA);
-
-	while (!(status & SMSTA_XEN) && timeout--) {
-		msleep(1);
+	if (smbus->use_irq) {
+		reinit_completion(&smbus->irq_completion);
+		reg_write(smbus, REG_IMASK, SMSTA_XEN | SMSTA_MTN);
+		wait_for_completion_timeout(&smbus->irq_completion, msecs_to_jiffies(100));
+		reg_write(smbus, REG_IMASK, 0);
 		status = reg_read(smbus, REG_SMSTA);
+	} else {
+		status = reg_read(smbus, REG_SMSTA);
+		while (!(status & SMSTA_XEN) && timeout--) {
+			msleep(1);
+			status = reg_read(smbus, REG_SMSTA);
+		}
 	}
 
 	/* Got NACK? */
@@ -344,10 +353,14 @@ int pasemi_i2c_common_probe(struct pasemi_smbus *smbus)
 
 	/* set up the sysfs linkage to our parent device */
 	smbus->adapter.dev.parent = smbus->dev;
+	smbus->use_irq = 0;
+	init_completion(&smbus->irq_completion);
 
 	if (smbus->hw_rev != PASEMI_HW_REV_PCI)
 		smbus->hw_rev = reg_read(smbus, REG_REV);
 
+	reg_write(smbus, REG_IMASK, 0);
+
 	pasemi_reset(smbus);
 
 	error = devm_i2c_add_adapter(smbus->dev, &smbus->adapter);
@@ -356,3 +369,12 @@ int pasemi_i2c_common_probe(struct pasemi_smbus *smbus)
 
 	return 0;
 }
+
+irqreturn_t pasemi_irq_handler(int irq, void *dev_id)
+{
+	struct pasemi_smbus *smbus = dev_id;
+
+	reg_write(smbus, REG_IMASK, 0);
+	complete(&smbus->irq_completion);
+	return IRQ_HANDLED;
+}
diff --git a/drivers/i2c/busses/i2c-pasemi-core.h b/drivers/i2c/busses/i2c-pasemi-core.h
index 4655124a37f3..88821f4e8a9f 100644
--- a/drivers/i2c/busses/i2c-pasemi-core.h
+++ b/drivers/i2c/busses/i2c-pasemi-core.h
@@ -7,6 +7,7 @@
 #include <linux/i2c-smbus.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/completion.h>
 
 #define PASEMI_HW_REV_PCI -1
 
@@ -16,6 +17,10 @@ struct pasemi_smbus {
 	void __iomem		*ioaddr;
 	unsigned int		 clk_div;
 	int			 hw_rev;
+	int			 use_irq;
+	struct completion	 irq_completion;
 };
 
 int pasemi_i2c_common_probe(struct pasemi_smbus *smbus);
+
+irqreturn_t pasemi_irq_handler(int irq, void *dev_id);
diff --git a/drivers/i2c/busses/i2c-pasemi-platform.c b/drivers/i2c/busses/i2c-pasemi-platform.c
index 88a54aaf7e3c..e35945a91dbe 100644
--- a/drivers/i2c/busses/i2c-pasemi-platform.c
+++ b/drivers/i2c/busses/i2c-pasemi-platform.c
@@ -49,6 +49,7 @@ static int pasemi_platform_i2c_probe(struct platform_device *pdev)
 	struct pasemi_smbus *smbus;
 	u32 frequency;
 	int error;
+	int irq_num;
 
 	data = devm_kzalloc(dev, sizeof(struct pasemi_platform_i2c_data),
 			    GFP_KERNEL);
@@ -82,6 +83,11 @@ static int pasemi_platform_i2c_probe(struct platform_device *pdev)
 	if (error)
 		goto out_clk_disable;
 
+	irq_num = platform_get_irq(pdev, 0);
+	error = devm_request_irq(smbus->dev, irq_num, pasemi_irq_handler, 0, "pasemi_apple_i2c", (void *)smbus);
+
+	if (!error)
+		smbus->use_irq = 1;
 	platform_set_drvdata(pdev, data);
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c
index f614cade432b..30e38bc8b6db 100644
--- a/drivers/i2c/busses/i2c-pxa-pci.c
+++ b/drivers/i2c/busses/i2c-pxa-pci.c
@@ -105,7 +105,7 @@ static int ce4100_i2c_probe(struct pci_dev *dev,
 	int i;
 	struct ce4100_devices *sds;
 
-	ret = pci_enable_device_mem(dev);
+	ret = pcim_enable_device(dev);
 	if (ret)
 		return ret;
 
@@ -114,10 +114,8 @@ static int ce4100_i2c_probe(struct pci_dev *dev,
 		return -EINVAL;
 	}
 	sds = kzalloc(sizeof(*sds), GFP_KERNEL);
-	if (!sds) {
-		ret = -ENOMEM;
-		goto err_mem;
-	}
+	if (!sds)
+		return -ENOMEM;
 
 	for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) {
 		sds->pdev[i] = add_i2c_device(dev, i);
@@ -133,8 +131,6 @@ static int ce4100_i2c_probe(struct pci_dev *dev,
 
 err_dev_add:
 	kfree(sds);
-err_mem:
-	pci_disable_device(dev);
 	return ret;
 }
 
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 8fce98bb77ff..fd70794bfcee 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -88,6 +88,7 @@ struct geni_i2c_dev {
 	int cur_wr;
 	int cur_rd;
 	spinlock_t lock;
+	struct clk *core_clk;
 	u32 clk_freq_out;
 	const struct geni_i2c_clk_fld *clk_fld;
 	int suspended;
@@ -100,6 +101,13 @@ struct geni_i2c_dev {
 	bool abort_done;
 };
 
+struct geni_i2c_desc {
+	bool has_core_clk;
+	char *icc_ddr;
+	bool no_dma_support;
+	unsigned int tx_fifo_depth;
+};
+
 struct geni_i2c_err_log {
 	int err;
 	const char *msg;
@@ -763,6 +771,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	u32 proto, tx_depth, fifo_disable;
 	int ret;
 	struct device *dev = &pdev->dev;
+	const struct geni_i2c_desc *desc = NULL;
 
 	gi2c = devm_kzalloc(dev, sizeof(*gi2c), GFP_KERNEL);
 	if (!gi2c)
@@ -775,6 +784,14 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(gi2c->se.base))
 		return PTR_ERR(gi2c->se.base);
 
+	desc = device_get_match_data(&pdev->dev);
+
+	if (desc && desc->has_core_clk) {
+		gi2c->core_clk = devm_clk_get(dev, "core");
+		if (IS_ERR(gi2c->core_clk))
+			return PTR_ERR(gi2c->core_clk);
+	}
+
 	gi2c->se.clk = devm_clk_get(dev, "se");
 	if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(dev))
 		return PTR_ERR(gi2c->se.clk);
@@ -818,7 +835,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	gi2c->adap.dev.of_node = dev->of_node;
 	strscpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
 
-	ret = geni_icc_get(&gi2c->se, "qup-memory");
+	ret = geni_icc_get(&gi2c->se, desc ? desc->icc_ddr : "qup-memory");
 	if (ret)
 		return ret;
 	/*
@@ -828,12 +845,17 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	 */
 	gi2c->se.icc_paths[GENI_TO_CORE].avg_bw = GENI_DEFAULT_BW;
 	gi2c->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
-	gi2c->se.icc_paths[GENI_TO_DDR].avg_bw = Bps_to_icc(gi2c->clk_freq_out);
+	if (!desc || desc->icc_ddr)
+		gi2c->se.icc_paths[GENI_TO_DDR].avg_bw = Bps_to_icc(gi2c->clk_freq_out);
 
 	ret = geni_icc_set_bw(&gi2c->se);
 	if (ret)
 		return ret;
 
+	ret = clk_prepare_enable(gi2c->core_clk);
+	if (ret)
+		return ret;
+
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret) {
 		dev_err(dev, "Error turning on resources %d\n", ret);
@@ -843,10 +865,15 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	if (proto != GENI_SE_I2C) {
 		dev_err(dev, "Invalid proto %d\n", proto);
 		geni_se_resources_off(&gi2c->se);
+		clk_disable_unprepare(gi2c->core_clk);
 		return -ENXIO;
 	}
 
-	fifo_disable = readl_relaxed(gi2c->se.base + GENI_IF_DISABLE_RO) & FIFO_IF_DISABLE;
+	if (desc && desc->no_dma_support)
+		fifo_disable = false;
+	else
+		fifo_disable = readl_relaxed(gi2c->se.base + GENI_IF_DISABLE_RO) & FIFO_IF_DISABLE;
+
 	if (fifo_disable) {
 		/* FIFO is disabled, so we can only use GPI DMA */
 		gi2c->gpi_mode = true;
@@ -858,6 +885,16 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	} else {
 		gi2c->gpi_mode = false;
 		tx_depth = geni_se_get_tx_fifo_depth(&gi2c->se);
+
+		/* I2C Master Hub Serial Elements doesn't have the HW_PARAM_0 register */
+		if (!tx_depth && desc)
+			tx_depth = desc->tx_fifo_depth;
+
+		if (!tx_depth) {
+			dev_err(dev, "Invalid TX FIFO depth\n");
+			return -EINVAL;
+		}
+
 		gi2c->tx_wm = tx_depth - 1;
 		geni_se_init(&gi2c->se, gi2c->tx_wm, tx_depth);
 		geni_se_config_packing(&gi2c->se, BITS_PER_BYTE,
@@ -866,6 +903,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
 		dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
 	}
 
+	clk_disable_unprepare(gi2c->core_clk);
 	ret = geni_se_resources_off(&gi2c->se);
 	if (ret) {
 		dev_err(dev, "Error turning off resources %d\n", ret);
@@ -931,6 +969,8 @@ static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
 		gi2c->suspended = 1;
 	}
 
+	clk_disable_unprepare(gi2c->core_clk);
+
 	return geni_icc_disable(&gi2c->se);
 }
 
@@ -943,6 +983,10 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	ret = clk_prepare_enable(gi2c->core_clk);
+	if (ret)
+		return ret;
+
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret)
 		return ret;
@@ -981,8 +1025,16 @@ static const struct dev_pm_ops geni_i2c_pm_ops = {
 									NULL)
 };
 
+const struct geni_i2c_desc i2c_master_hub = {
+	.has_core_clk = true,
+	.icc_ddr = NULL,
+	.no_dma_support = true,
+	.tx_fifo_depth = 16,
+};
+
 static const struct of_device_id geni_i2c_dt_match[] = {
 	{ .compatible = "qcom,geni-i2c" },
+	{ .compatible = "qcom,geni-i2c-master-hub", .data = &i2c_master_hub },
 	{}
 };
 MODULE_DEVICE_TABLE(of, geni_i2c_dt_match);
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 3869c258a529..6aab84c8d22b 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1830,6 +1830,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	i2c_dev->adapter.class = I2C_CLASS_DEPRECATED;
 	i2c_dev->adapter.algo = &tegra_i2c_algo;
 	i2c_dev->adapter.nr = pdev->id;
+	ACPI_COMPANION_SET(&i2c_dev->adapter.dev, ACPI_COMPANION(&pdev->dev));
 
 	if (i2c_dev->hw->supports_bus_clear)
 		i2c_dev->adapter.bus_recovery_info = &tegra_i2c_recovery_info;
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 277a02455cdd..bee5a2ef1f22 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -858,11 +858,14 @@ static int xiic_i2c_remove(struct platform_device *pdev)
 	/* remove adapter & data */
 	i2c_del_adapter(&i2c->adap);
 
-	ret = pm_runtime_resume_and_get(i2c->dev);
+	ret = pm_runtime_get_sync(i2c->dev);
+
 	if (ret < 0)
-		return ret;
+		dev_warn(&pdev->dev, "Failed to activate device for removal (%pe)\n",
+			 ERR_PTR(ret));
+	else
+		xiic_deinit(i2c);
 
-	xiic_deinit(i2c);
 	pm_runtime_put_sync(i2c->dev);
 	clk_disable_unprepare(i2c->clk);
 	pm_runtime_disable(&pdev->dev);
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 13fafb74bab8..087e480b624c 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -1018,15 +1018,14 @@ static const struct i2c_device_id dummy_id[] = {
 	{ },
 };
 
-static int dummy_probe(struct i2c_client *client,
-		       const struct i2c_device_id *id)
+static int dummy_probe(struct i2c_client *client)
 {
 	return 0;
 }
 
 static struct i2c_driver dummy_driver = {
 	.driver.name	= "dummy",
-	.probe		= dummy_probe,
+	.probe_new	= dummy_probe,
 	.id_table	= dummy_id,
 };
 
diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c
index 4abc2d919881..5f25f23c4ff8 100644
--- a/drivers/i2c/i2c-slave-eeprom.c
+++ b/drivers/i2c/i2c-slave-eeprom.c
@@ -140,8 +140,9 @@ static int i2c_slave_init_eeprom_data(struct eeprom_data *eeprom, struct i2c_cli
 	return 0;
 }
 
-static int i2c_slave_eeprom_probe(struct i2c_client *client, const struct i2c_device_id *id)
+static int i2c_slave_eeprom_probe(struct i2c_client *client)
 {
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
 	struct eeprom_data *eeprom;
 	int ret;
 	unsigned int size = FIELD_GET(I2C_SLAVE_BYTELEN, id->driver_data) + 1;
@@ -206,7 +207,7 @@ static struct i2c_driver i2c_slave_eeprom_driver = {
 	.driver = {
 		.name = "i2c-slave-eeprom",
 	},
-	.probe = i2c_slave_eeprom_probe,
+	.probe_new = i2c_slave_eeprom_probe,
 	.remove = i2c_slave_eeprom_remove,
 	.id_table = i2c_slave_eeprom_id,
 };
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index 07c92c8495a3..cd19546d31fc 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -112,8 +112,7 @@ static void smbalert_work(struct work_struct *work)
 }
 
 /* Setup SMBALERT# infrastructure */
-static int smbalert_probe(struct i2c_client *ara,
-			  const struct i2c_device_id *id)
+static int smbalert_probe(struct i2c_client *ara)
 {
 	struct i2c_smbus_alert_setup *setup = dev_get_platdata(&ara->dev);
 	struct i2c_smbus_alert *alert;
@@ -170,7 +169,7 @@ static struct i2c_driver smbalert_driver = {
 	.driver = {
 		.name	= "smbus_alert",
 	},
-	.probe		= smbalert_probe,
+	.probe_new	= smbalert_probe,
 	.remove		= smbalert_remove,
 	.id_table	= smbalert_ids,
 };
@@ -361,9 +360,15 @@ void i2c_register_spd(struct i2c_adapter *adap)
 		return;
 	}
 
+	/*
+	 * Memory types could be found at section 7.18.2 (Memory Device — Type), table 78
+	 * https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
+	 */
 	switch (common_mem_type) {
+	case 0x12:	/* DDR */
 	case 0x13:	/* DDR2 */
 	case 0x18:	/* DDR3 */
+	case 0x1B:	/* LPDDR */
 	case 0x1C:	/* LPDDR2 */
 	case 0x1D:	/* LPDDR3 */
 		name = "spd";
diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
index ea83de78f52d..09d1d9e67e31 100644
--- a/drivers/i2c/muxes/i2c-mux-pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -283,8 +283,7 @@ static int pca9541_release_chan(struct i2c_mux_core *muxc, u32 chan)
 /*
  * I2C init/probing/exit functions
  */
-static int pca9541_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int pca9541_probe(struct i2c_client *client)
 {
 	struct i2c_adapter *adap = client->adapter;
 	struct i2c_mux_core *muxc;
@@ -337,7 +336,7 @@ static struct i2c_driver pca9541_driver = {
 		   .name = "pca9541",
 		   .of_match_table = of_match_ptr(pca9541_of_match),
 		   },
-	.probe = pca9541_probe,
+	.probe_new = pca9541_probe,
 	.remove = pca9541_remove,
 	.id_table = pca9541_id,
 };
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index a5f458b635df..3639e6d7304c 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -411,9 +411,9 @@ static int pca954x_init(struct i2c_client *client, struct pca954x *data)
 /*
  * I2C init/probing/exit functions
  */
-static int pca954x_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int pca954x_probe(struct i2c_client *client)
 {
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
 	struct i2c_adapter *adap = client->adapter;
 	struct device *dev = &client->dev;
 	struct gpio_desc *gpio;
@@ -554,7 +554,7 @@ static struct i2c_driver pca954x_driver = {
 		.pm	= &pca954x_pm,
 		.of_match_table = pca954x_of_match,
 	},
-	.probe		= pca954x_probe,
+	.probe_new	= pca954x_probe,
 	.remove		= pca954x_remove,
 	.id_table	= pca954x_id,
 };
diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c
index 0e0679f65cf7..30a6de1694e0 100644
--- a/drivers/i2c/muxes/i2c-mux-reg.c
+++ b/drivers/i2c/muxes/i2c-mux-reg.c
@@ -183,13 +183,12 @@ static int i2c_mux_reg_probe(struct platform_device *pdev)
 	if (!mux->data.reg) {
 		dev_info(&pdev->dev,
 			"Register not set, using platform resource\n");
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		mux->data.reg_size = resource_size(res);
-		mux->data.reg = devm_ioremap_resource(&pdev->dev, res);
+		mux->data.reg = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 		if (IS_ERR(mux->data.reg)) {
 			ret = PTR_ERR(mux->data.reg);
 			goto err_put_parent;
 		}
+		mux->data.reg_size = resource_size(res);
 	}
 
 	if (mux->data.reg_size != 4 && mux->data.reg_size != 2 &&
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index a0ceeede450f..f0475b93ca73 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -81,19 +81,31 @@
  */
 
 #define MAX_CLK_PERF_LEVEL 32
-#define NUM_AHB_CLKS 2
+#define MAX_CLKS 2
 
 /**
  * struct geni_wrapper - Data structure to represent the QUP Wrapper Core
  * @dev:		Device pointer of the QUP wrapper core
  * @base:		Base address of this instance of QUP wrapper core
- * @ahb_clks:		Handle to the primary & secondary AHB clocks
+ * @clks:		Handle to the primary & optional secondary AHB clocks
+ * @num_clks:		Count of clocks
  * @to_core:		Core ICC path
  */
 struct geni_wrapper {
 	struct device *dev;
 	void __iomem *base;
-	struct clk_bulk_data ahb_clks[NUM_AHB_CLKS];
+	struct clk_bulk_data clks[MAX_CLKS];
+	unsigned int num_clks;
+};
+
+/**
+ * struct geni_se_desc - Data structure to represent the QUP Wrapper resources
+ * @clks:		Name of the primary & optional secondary AHB clocks
+ * @num_clks:		Count of clock names
+ */
+struct geni_se_desc {
+	unsigned int num_clks;
+	const char * const *clks;
 };
 
 static const char * const icc_path_names[] = {"qup-core", "qup-config",
@@ -496,8 +508,7 @@ static void geni_se_clks_off(struct geni_se *se)
 	struct geni_wrapper *wrapper = se->wrapper;
 
 	clk_disable_unprepare(se->clk);
-	clk_bulk_disable_unprepare(ARRAY_SIZE(wrapper->ahb_clks),
-						wrapper->ahb_clks);
+	clk_bulk_disable_unprepare(wrapper->num_clks, wrapper->clks);
 }
 
 /**
@@ -528,15 +539,13 @@ static int geni_se_clks_on(struct geni_se *se)
 	int ret;
 	struct geni_wrapper *wrapper = se->wrapper;
 
-	ret = clk_bulk_prepare_enable(ARRAY_SIZE(wrapper->ahb_clks),
-						wrapper->ahb_clks);
+	ret = clk_bulk_prepare_enable(wrapper->num_clks, wrapper->clks);
 	if (ret)
 		return ret;
 
 	ret = clk_prepare_enable(se->clk);
 	if (ret)
-		clk_bulk_disable_unprepare(ARRAY_SIZE(wrapper->ahb_clks),
-							wrapper->ahb_clks);
+		clk_bulk_disable_unprepare(wrapper->num_clks, wrapper->clks);
 	return ret;
 }
 
@@ -887,11 +896,33 @@ static int geni_se_probe(struct platform_device *pdev)
 		return PTR_ERR(wrapper->base);
 
 	if (!has_acpi_companion(&pdev->dev)) {
-		wrapper->ahb_clks[0].id = "m-ahb";
-		wrapper->ahb_clks[1].id = "s-ahb";
-		ret = devm_clk_bulk_get(dev, NUM_AHB_CLKS, wrapper->ahb_clks);
+		const struct geni_se_desc *desc;
+		int i;
+
+		desc = device_get_match_data(&pdev->dev);
+		if (!desc)
+			return -EINVAL;
+
+		wrapper->num_clks = min_t(unsigned int, desc->num_clks, MAX_CLKS);
+
+		for (i = 0; i < wrapper->num_clks; ++i)
+			wrapper->clks[i].id = desc->clks[i];
+
+		ret = of_count_phandle_with_args(dev->of_node, "clocks", "#clock-cells");
+		if (ret < 0) {
+			dev_err(dev, "invalid clocks property at %pOF\n", dev->of_node);
+			return ret;
+		}
+
+		if (ret < wrapper->num_clks) {
+			dev_err(dev, "invalid clocks count at %pOF, expected %d entries\n",
+				dev->of_node, wrapper->num_clks);
+			return -EINVAL;
+		}
+
+		ret = devm_clk_bulk_get(dev, wrapper->num_clks, wrapper->clks);
 		if (ret) {
-			dev_err(dev, "Err getting AHB clks %d\n", ret);
+			dev_err(dev, "Err getting clks %d\n", ret);
 			return ret;
 		}
 	}
@@ -901,8 +932,28 @@ static int geni_se_probe(struct platform_device *pdev)
 	return devm_of_platform_populate(dev);
 }
 
+static const char * const qup_clks[] = {
+	"m-ahb",
+	"s-ahb",
+};
+
+static const struct geni_se_desc qup_desc = {
+	.clks = qup_clks,
+	.num_clks = ARRAY_SIZE(qup_clks),
+};
+
+static const char * const i2c_master_hub_clks[] = {
+	"s-ahb",
+};
+
+static const struct geni_se_desc i2c_master_hub_desc = {
+	.clks = i2c_master_hub_clks,
+	.num_clks = ARRAY_SIZE(i2c_master_hub_clks),
+};
+
 static const struct of_device_id geni_se_dt_match[] = {
-	{ .compatible = "qcom,geni-se-qup", },
+	{ .compatible = "qcom,geni-se-qup", .data = &qup_desc },
+	{ .compatible = "qcom,geni-se-i2c-master-hub", .data = &i2c_master_hub_desc },
 	{}
 };
 MODULE_DEVICE_TABLE(of, geni_se_dt_match);