Merge tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "There are not a lot of important fixes for the soc tree yet this time,
  but it's time to upstream what I got so far:

   - DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical
     temperature points

   - A number of fixes for the Arm SCMI firmware, addressing correctness
     issues in the code, in particular error handling and resource
     leaks.

   - One error handling fix for the new i.MX93 power domain driver

   - Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips,
     fixing incorrect or missing DT properties for MDIO controller
     nodes, CPLD, USB and regulators for various boards, as well as some
     fixes for DT schema checks.

   - MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git
     URLs"

* tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
  arm64: dts: juno: Add thermal critical trip points
  firmware: arm_scmi: Fix deferred_tx_wq release on error paths
  firmware: arm_scmi: Fix devres allocation device in virtio transport
  firmware: arm_scmi: Make Rx chan_setup fail on memory errors
  firmware: arm_scmi: Make tx_prepare time out eventually
  firmware: arm_scmi: Suppress the driver's bind attributes
  firmware: arm_scmi: Cleanup the core driver removal callback
  MAINTAINERS: Update HiSilicon LPC BUS Driver maintainer
  ARM: dts: ux500: Add trips to battery thermal zones
  arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
  arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
  arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
  soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
  arm64: dts: imx93: correct gpio-ranges
  arm64: dts: imx93: correct s4mu interrupt names
  dt-bindings: power: gpcv2: add power-domains property
  arm64: dts: imx8: correct clock order
  ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
  ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
  arm64: dts: imx8mn: Correct the usb power domain
  ...

34 files changed, 267 insertions, 82 deletions

diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
index 58022ae7d5dd..dfdb8dfb6b65 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
@@ -81,6 +81,9 @@ properties:
 
           power-supply: true
 
+          power-domains:
+            maxItems: 1
+
           resets:
             description: |
               A number of phandles to resets that need to be asserted during
diff --git a/MAINTAINERS b/MAINTAINERS
index e1bc31a6624b..046ff06ff97f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3984,7 +3984,7 @@ M:	Rafał Miłecki <rafal@milecki.pl>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
 F:	arch/arm64/boot/dts/broadcom/bcmbca/*
 N:	bcmbca
@@ -4009,7 +4009,7 @@ R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 F:	drivers/pci/controller/pcie-brcmstb.c
 F:	drivers/staging/vc04_services
@@ -4023,7 +4023,7 @@ M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 S:	Maintained
-T:	git git://github.com/broadcom/mach-bcm
+T:	git https://github.com/broadcom/mach-bcm
 F:	arch/arm/mach-bcm/
 N:	bcm281*
 N:	bcm113*
@@ -4088,7 +4088,7 @@ M:	Florian Fainelli <f.fainelli@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 F:	arch/arm/boot/dts/bcm7*.dts*
 F:	arch/arm/include/asm/hardware/cache-b15-rac.h
@@ -4121,7 +4121,7 @@ M:	Florian Fainelli <f.fainelli@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	arch/mips/bmips/*
 F:	arch/mips/boot/dts/brcm/bcm*.dts*
 F:	arch/mips/include/asm/mach-bmips/*
@@ -4262,7 +4262,7 @@ M:	Scott Branden <sbranden@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	arch/arm64/boot/dts/broadcom/northstar2/*
 F:	arch/arm64/boot/dts/broadcom/stingray/*
 F:	drivers/clk/bcm/clk-ns*
@@ -4332,7 +4332,7 @@ M:	Florian Fainelli <f.fainelli@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	drivers/soc/bcm/bcm63xx/bcm-pmb.c
 F:	include/dt-bindings/soc/bcm-pmb.h
 
@@ -9217,7 +9217,7 @@ W:	https://www.hisilicon.com
 F:	drivers/i2c/busses/i2c-hisi.c
 
 HISILICON LPC BUS DRIVER
-M:	john.garry@huawei.com
+M:	Jay Fang <f.fangjian@huawei.com>
 S:	Maintained
 W:	http://www.hisilicon.com
 F:	Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
diff --git a/arch/arm/boot/dts/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
index 15f4824a5142..bddf3822ebf7 100644
--- a/arch/arm/boot/dts/imx6q-yapp4-crux.dts
+++ b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 68e5ab2e27e2..6bb4855d13ce 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -29,7 +29,7 @@
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 8e23cec7149e..696427b487f0 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -26,7 +26,7 @@
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
index cea165f2161a..afaf4a6759d4 100644
--- a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
+++ b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index fbaa0ce46427..8f1bb78fc1e4 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -24,6 +24,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 1c9094f24893..e2f0cdacba7d 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -28,6 +28,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
index d6940e0afa86..27a3ab7e25e1 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
@@ -44,6 +44,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index 5f41256d7f4b..b88f0c07873d 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -57,6 +57,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
index 806da3fc33cd..7231bc745200 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -30,6 +30,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index b0dce91aff4b..9604695edf53 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -35,6 +35,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index ed5c79c3d04b..69387e8754a9 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -30,6 +30,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
index c57676faf181..167846df3104 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
@@ -34,6 +34,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 81b341a5ae45..93e5f5ed888d 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -30,6 +30,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 2f27619d8abd..8b4d280b1e7e 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -751,12 +751,26 @@
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 0>;
+			trips {
+				pmic_crit0: trip0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		soc {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 3>;
+			trips {
+				soc_crit0: trip0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		big_cluster_thermal_zone: big-cluster {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 421d879013d7..260d045dbd9a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -779,6 +779,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
@@ -788,6 +791,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index f1b9cc8714dc..348d9e3a9125 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -532,6 +532,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -541,6 +544,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 6680fb2a6dc9..8c76d86cb756 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1385,6 +1385,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			little-endian;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -1395,6 +1398,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index 82a1c4488378..10370d1a6c6d 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -38,9 +38,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
 	};
@@ -49,9 +49,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
 		fsl,tuning-step = <2>;
@@ -62,9 +62,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
index 32f6f2f50c10..43e89859c044 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@@ -250,21 +250,21 @@
 		/* SODIMM 96 */
 		MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4			0x1c4
 		/* CPLD_D[7] */
-		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x1c4
+		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x184
 		/* CPLD_D[6] */
-		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x1c4
+		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x184
 		/* CPLD_D[5] */
-		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x1c4
+		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x184
 		/* CPLD_D[4] */
-		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x184
 		/* CPLD_D[3] */
-		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x184
 		/* CPLD_D[2] */
-		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x184
 		/* CPLD_D[1] */
-		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x184
 		/* CPLD_D[0] */
-		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x184
 		/* KBD_intK */
 		MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27			0x1c4
 		/* DISP_reset */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index afb90f59c83c..dabd94dc30c4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -276,6 +276,7 @@
 		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
 	};
 
 	usbphynop2: usbphynop2 {
@@ -285,6 +286,7 @@
 		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg2>;
 	};
 
 	soc: soc@0 {
@@ -674,13 +676,11 @@
 					pgc_otg1: power-domain@2 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_otg2: power-domain@3 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_gpumix: power-domain@4 {
@@ -1186,7 +1186,7 @@
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
-				power-domains = <&pgc_otg1>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
@@ -1206,7 +1206,7 @@
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop2>;
 				fsl,usbmisc = <&usbmisc2 0>;
-				power-domains = <&pgc_otg2>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index cb2836bfbd95..ad0b99adf691 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -662,7 +662,6 @@
 					pgc_otg1: power-domain@1 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_gpumix: power-domain@2 {
@@ -1076,7 +1075,7 @@
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
-				power-domains = <&pgc_otg1>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
@@ -1175,5 +1174,6 @@
 		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 7b712d1888ea..5dcd1de586b5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -354,16 +354,6 @@
 			  "SODIMM_82",
 			  "SODIMM_70",
 			  "SODIMM_72";
-
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
 };
 
 &gpio3 {
@@ -432,6 +422,16 @@
 			  "SODIMM_256",
 			  "SODIMM_48",
 			  "SODIMM_44";
+
+	ctrl-sleep-moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+	};
 };
 
 /* On-module I2C */
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 3a5713bb4880..0247866fc86b 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -451,7 +451,7 @@
 			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
 				 <&clk IMX93_CLK_GPIO2_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 32 32>;
+			gpio-ranges = <&iomuxc 0 4 30>;
 		};
 
 		gpio3: gpio@43820080 {
@@ -465,7 +465,8 @@
 			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
 				 <&clk IMX93_CLK_GPIO3_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 64 32>;
+			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
+				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
 		};
 
 		gpio4: gpio@43830080 {
@@ -479,7 +480,7 @@
 			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
 				 <&clk IMX93_CLK_GPIO4_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 96 32>;
+			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
 		};
 
 		gpio1: gpio@47400080 {
@@ -493,7 +494,7 @@
 			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
 				 <&clk IMX93_CLK_GPIO1_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 0 32>;
+			gpio-ranges = <&iomuxc 0 92 16>;
 		};
 
 		s4muap: mailbox@47520000 {
@@ -501,7 +502,7 @@
 			reg = <0x47520000 0x10000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "txirq", "rxirq";
+			interrupt-names = "tx", "rx";
 			#mbox-cells = <2>;
 		};
 
diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
index d4e23101448a..35bb70724d44 100644
--- a/drivers/firmware/arm_scmi/bus.c
+++ b/drivers/firmware/arm_scmi/bus.c
@@ -216,9 +216,20 @@ void scmi_device_destroy(struct scmi_device *scmi_dev)
 	device_unregister(&scmi_dev->dev);
 }
 
+void scmi_device_link_add(struct device *consumer, struct device *supplier)
+{
+	struct device_link *link;
+
+	link = device_link_add(consumer, supplier, DL_FLAG_AUTOREMOVE_CONSUMER);
+
+	WARN_ON(!link);
+}
+
 void scmi_set_handle(struct scmi_device *scmi_dev)
 {
 	scmi_dev->handle = scmi_handle_get(&scmi_dev->dev);
+	if (scmi_dev->handle)
+		scmi_device_link_add(&scmi_dev->dev, scmi_dev->handle->dev);
 }
 
 int scmi_protocol_register(const struct scmi_protocol *proto)
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 61aba7447c32..a1c0154c31c6 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -97,6 +97,7 @@ static inline void unpack_scmi_header(u32 msg_hdr, struct scmi_msg_hdr *hdr)
 struct scmi_revision_info *
 scmi_revision_area_get(const struct scmi_protocol_handle *ph);
 int scmi_handle_put(const struct scmi_handle *handle);
+void scmi_device_link_add(struct device *consumer, struct device *supplier);
 struct scmi_handle *scmi_handle_get(struct device *dev);
 void scmi_set_handle(struct scmi_device *scmi_dev);
 void scmi_setup_protocol_implemented(const struct scmi_protocol_handle *ph,
@@ -117,6 +118,7 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
  *
  * @dev: Reference to device in the SCMI hierarchy corresponding to this
  *	 channel
+ * @rx_timeout_ms: The configured RX timeout in milliseconds.
  * @handle: Pointer to SCMI entity handle
  * @no_completion_irq: Flag to indicate that this channel has no completion
  *		       interrupt mechanism for synchronous commands.
@@ -126,6 +128,7 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
  */
 struct scmi_chan_info {
 	struct device *dev;
+	unsigned int rx_timeout_ms;
 	struct scmi_handle *handle;
 	bool no_completion_irq;
 	void *transport_info;
@@ -232,7 +235,7 @@ void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id);
 struct scmi_shared_mem;
 
 void shmem_tx_prepare(struct scmi_shared_mem __iomem *shmem,
-		      struct scmi_xfer *xfer);
+		      struct scmi_xfer *xfer, struct scmi_chan_info *cinfo);
 u32 shmem_read_header(struct scmi_shared_mem __iomem *shmem);
 void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem,
 			  struct scmi_xfer *xfer);
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 609ebedee9cb..f818d00bb2c6 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -2013,6 +2013,7 @@ static int scmi_chan_setup(struct scmi_info *info, struct device *dev,
 		return -ENOMEM;
 
 	cinfo->dev = dev;
+	cinfo->rx_timeout_ms = info->desc->max_rx_timeout_ms;
 
 	ret = info->desc->ops->chan_setup(cinfo, info->dev, tx);
 	if (ret)
@@ -2044,8 +2045,12 @@ scmi_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id)
 {
 	int ret = scmi_chan_setup(info, dev, prot_id, true);
 
-	if (!ret) /* Rx is optional, hence no error check */
-		scmi_chan_setup(info, dev, prot_id, false);
+	if (!ret) {
+		/* Rx is optional, report only memory errors */
+		ret = scmi_chan_setup(info, dev, prot_id, false);
+		if (ret && ret != -ENOMEM)
+			ret = 0;
+	}
 
 	return ret;
 }
@@ -2273,10 +2278,16 @@ int scmi_protocol_device_request(const struct scmi_device_id *id_table)
 			sdev = scmi_get_protocol_device(child, info,
 							id_table->protocol_id,
 							id_table->name);
-			/* Set handle if not already set: device existed */
-			if (sdev && !sdev->handle)
-				sdev->handle =
-					scmi_handle_get_from_info_unlocked(info);
+			if (sdev) {
+				/* Set handle if not already set: device existed */
+				if (!sdev->handle)
+					sdev->handle =
+						scmi_handle_get_from_info_unlocked(info);
+				/* Relink consumer and suppliers */
+				if (sdev->handle)
+					scmi_device_link_add(&sdev->dev,
+							     sdev->handle->dev);
+			}
 		} else {
 			dev_err(info->dev,
 				"Failed. SCMI protocol %d not active.\n",
@@ -2475,20 +2486,17 @@ void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id)
 
 static int scmi_remove(struct platform_device *pdev)
 {
-	int ret = 0, id;
+	int ret, id;
 	struct scmi_info *info = platform_get_drvdata(pdev);
 	struct device_node *child;
 
 	mutex_lock(&scmi_list_mutex);
 	if (info->users)
-		ret = -EBUSY;
-	else
-		list_del(&info->node);
+		dev_warn(&pdev->dev,
+			 "Still active SCMI users will be forcibly unbound.\n");
+	list_del(&info->node);
 	mutex_unlock(&scmi_list_mutex);
 
-	if (ret)
-		return ret;
-
 	scmi_notification_exit(&info->handle);
 
 	mutex_lock(&info->protocols_mtx);
@@ -2500,7 +2508,11 @@ static int scmi_remove(struct platform_device *pdev)
 	idr_destroy(&info->active_protocols);
 
 	/* Safe to free channels since no more users */
-	return scmi_cleanup_txrx_channels(info);
+	ret = scmi_cleanup_txrx_channels(info);
+	if (ret)
+		dev_warn(&pdev->dev, "Failed to cleanup SCMI channels.\n");
+
+	return 0;
 }
 
 static ssize_t protocol_version_show(struct device *dev,
@@ -2571,6 +2583,7 @@ MODULE_DEVICE_TABLE(of, scmi_of_match);
 static struct platform_driver scmi_driver = {
 	.driver = {
 		   .name = "arm-scmi",
+		   .suppress_bind_attrs = true,
 		   .of_match_table = scmi_of_match,
 		   .dev_groups = versions_groups,
 		   },
diff --git a/drivers/firmware/arm_scmi/mailbox.c b/drivers/firmware/arm_scmi/mailbox.c
index 08ff4d110beb..1e40cb035044 100644
--- a/drivers/firmware/arm_scmi/mailbox.c
+++ b/drivers/firmware/arm_scmi/mailbox.c
@@ -36,7 +36,7 @@ static void tx_prepare(struct mbox_client *cl, void *m)
 {
 	struct scmi_mailbox *smbox = client_to_scmi_mailbox(cl);
 
-	shmem_tx_prepare(smbox->shmem, m);
+	shmem_tx_prepare(smbox->shmem, m, smbox->cinfo);
 }
 
 static void rx_callback(struct mbox_client *cl, void *m)
diff --git a/drivers/firmware/arm_scmi/optee.c b/drivers/firmware/arm_scmi/optee.c
index f42dad997ac9..2a7aeab40e54 100644
--- a/drivers/firmware/arm_scmi/optee.c
+++ b/drivers/firmware/arm_scmi/optee.c
@@ -498,7 +498,7 @@ static int scmi_optee_send_message(struct scmi_chan_info *cinfo,
 		msg_tx_prepare(channel->req.msg, xfer);
 		ret = invoke_process_msg_channel(channel, msg_command_size(xfer));
 	} else {
-		shmem_tx_prepare(channel->req.shmem, xfer);
+		shmem_tx_prepare(channel->req.shmem, xfer, cinfo);
 		ret = invoke_process_smt_channel(channel);
 	}
 
diff --git a/drivers/firmware/arm_scmi/shmem.c b/drivers/firmware/arm_scmi/shmem.c
index 0e3eaea5d852..1dfe534b8518 100644
--- a/drivers/firmware/arm_scmi/shmem.c
+++ b/drivers/firmware/arm_scmi/shmem.c
@@ -5,10 +5,13 @@
  * Copyright (C) 2019 ARM Ltd.
  */
 
+#include <linux/ktime.h>
 #include <linux/io.h>
 #include <linux/processor.h>
 #include <linux/types.h>
 
+#include <asm-generic/bug.h>
+
 #include "common.h"
 
 /*
@@ -30,16 +33,36 @@ struct scmi_shared_mem {
 };
 
 void shmem_tx_prepare(struct scmi_shared_mem __iomem *shmem,
-		      struct scmi_xfer *xfer)
+		      struct scmi_xfer *xfer, struct scmi_chan_info *cinfo)
 {
+	ktime_t stop;
+
 	/*
 	 * Ideally channel must be free by now unless OS timeout last
 	 * request and platform continued to process the same, wait
 	 * until it releases the shared memory, otherwise we may endup
-	 * overwriting its response with new message payload or vice-versa
+	 * overwriting its response with new message payload or vice-versa.
+	 * Giving up anyway after twice the expected channel timeout so as
+	 * not to bail-out on intermittent issues where the platform is
+	 * occasionally a bit slower to answer.
+	 *
+	 * Note that after a timeout is detected we bail-out and carry on but
+	 * the transport functionality is probably permanently compromised:
+	 * this is just to ease debugging and avoid complete hangs on boot
+	 * due to a misbehaving SCMI firmware.
 	 */
-	spin_until_cond(ioread32(&shmem->channel_status) &
-			SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
+	stop = ktime_add_ms(ktime_get(), 2 * cinfo->rx_timeout_ms);
+	spin_until_cond((ioread32(&shmem->channel_status) &
+			 SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE) ||
+			 ktime_after(ktime_get(), stop));
+	if (!(ioread32(&shmem->channel_status) &
+	      SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE)) {
+		WARN_ON_ONCE(1);
+		dev_err(cinfo->dev,
+			"Timeout waiting for a free TX channel !\n");
+		return;
+	}
+
 	/* Mark channel busy + clear error */
 	iowrite32(0x0, &shmem->channel_status);
 	iowrite32(xfer->hdr.poll_completion ? 0 : SCMI_SHMEM_FLAG_INTR_ENABLED,
diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
index 745acfdd0b3d..87a7b13cf868 100644
--- a/drivers/firmware/arm_scmi/smc.c
+++ b/drivers/firmware/arm_scmi/smc.c
@@ -188,7 +188,7 @@ static int smc_send_message(struct scmi_chan_info *cinfo,
 	 */
 	smc_channel_lock_acquire(scmi_info, xfer);
 
-	shmem_tx_prepare(scmi_info->shmem, xfer);
+	shmem_tx_prepare(scmi_info->shmem, xfer, cinfo);
 
 	arm_smccc_1_1_invoke(scmi_info->func_id, 0, 0, 0, 0, 0, 0, 0, &res);
 
diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c
index 14709dbc96a1..33c9b81a55cd 100644
--- a/drivers/firmware/arm_scmi/virtio.c
+++ b/drivers/firmware/arm_scmi/virtio.c
@@ -148,7 +148,6 @@ static void scmi_vio_channel_cleanup_sync(struct scmi_vio_channel *vioch)
 {
 	unsigned long flags;
 	DECLARE_COMPLETION_ONSTACK(vioch_shutdown_done);
-	void *deferred_wq = NULL;
 
 	/*
 	 * Prepare to wait for the last release if not already released
@@ -162,16 +161,11 @@ static void scmi_vio_channel_cleanup_sync(struct scmi_vio_channel *vioch)
 
 	vioch->shutdown_done = &vioch_shutdown_done;
 	virtio_break_device(vioch->vqueue->vdev);
-	if (!vioch->is_rx && vioch->deferred_tx_wq) {
-		deferred_wq = vioch->deferred_tx_wq;
+	if (!vioch->is_rx && vioch->deferred_tx_wq)
 		/* Cannot be kicked anymore after this...*/
 		vioch->deferred_tx_wq = NULL;
-	}
 	spin_unlock_irqrestore(&vioch->lock, flags);
 
-	if (deferred_wq)
-		destroy_workqueue(deferred_wq);
-
 	scmi_vio_channel_release(vioch);
 
 	/* Let any possibly concurrent RX path release the channel */
@@ -416,6 +410,11 @@ static bool virtio_chan_available(struct device *dev, int idx)
 	return vioch && !vioch->cinfo;
 }
 
+static void scmi_destroy_tx_workqueue(void *deferred_tx_wq)
+{
+	destroy_workqueue(deferred_tx_wq);
+}
+
 static int virtio_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
 			     bool tx)
 {
@@ -430,6 +429,8 @@ static int virtio_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
 
 	/* Setup a deferred worker for polling. */
 	if (tx && !vioch->deferred_tx_wq) {
+		int ret;
+
 		vioch->deferred_tx_wq =
 			alloc_workqueue(dev_name(&scmi_vdev->dev),
 					WQ_UNBOUND | WQ_FREEZABLE | WQ_SYSFS,
@@ -437,6 +438,11 @@ static int virtio_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
 		if (!vioch->deferred_tx_wq)
 			return -ENOMEM;
 
+		ret = devm_add_action_or_reset(dev, scmi_destroy_tx_workqueue,
+					       vioch->deferred_tx_wq);
+		if (ret)
+			return ret;
+
 		INIT_WORK(&vioch->deferred_tx_work,
 			  scmi_vio_deferred_tx_worker);
 	}
@@ -444,12 +450,12 @@ static int virtio_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
 	for (i = 0; i < vioch->max_msg; i++) {
 		struct scmi_vio_msg *msg;
 
-		msg = devm_kzalloc(cinfo->dev, sizeof(*msg), GFP_KERNEL);
+		msg = devm_kzalloc(dev, sizeof(*msg), GFP_KERNEL);
 		if (!msg)
 			return -ENOMEM;
 
 		if (tx) {
-			msg->request = devm_kzalloc(cinfo->dev,
+			msg->request = devm_kzalloc(dev,
 						    VIRTIO_SCMI_MAX_PDU_SIZE,
 						    GFP_KERNEL);
 			if (!msg->request)
@@ -458,7 +464,7 @@ static int virtio_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
 			refcount_set(&msg->users, 1);
 		}
 
-		msg->input = devm_kzalloc(cinfo->dev, VIRTIO_SCMI_MAX_PDU_SIZE,
+		msg->input = devm_kzalloc(dev, VIRTIO_SCMI_MAX_PDU_SIZE,
 					  GFP_KERNEL);
 		if (!msg->input)
 			return -ENOMEM;
diff --git a/drivers/soc/imx/imx93-pd.c b/drivers/soc/imx/imx93-pd.c
index 1f3d7039c1de..4d235c8c4924 100644
--- a/drivers/soc/imx/imx93-pd.c
+++ b/drivers/soc/imx/imx93-pd.c
@@ -135,11 +135,24 @@ static int imx93_pd_probe(struct platform_device *pdev)
 
 	ret = pm_genpd_init(&domain->genpd, NULL, domain->init_off);
 	if (ret)
-		return ret;
+		goto err_clk_unprepare;
 
 	platform_set_drvdata(pdev, domain);
 
-	return of_genpd_add_provider_simple(np, &domain->genpd);
+	ret = of_genpd_add_provider_simple(np, &domain->genpd);
+	if (ret)
+		goto err_genpd_remove;
+
+	return 0;
+
+err_genpd_remove:
+	pm_genpd_remove(&domain->genpd);
+
+err_clk_unprepare:
+	if (!domain->init_off)
+		clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
+
+	return ret;
 }
 
 static const struct of_device_id imx93_pd_ids[] = {