watchdog: remove at32ap700x_wdt

Since AVR32 is gone, this driver is useless.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

3 files changed, 0 insertions, 445 deletions

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 633173260f5a..6a602f70aaa4 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -807,15 +807,6 @@ config SPRD_WATCHDOG
 	  Say Y here to include watchdog timer supported
 	  by Spreadtrum system.
 
-# AVR32 Architecture
-
-config AT32AP700X_WDT
-	tristate "AT32AP700x watchdog"
-	depends on CPU_AT32AP700X || COMPILE_TEST
-	help
-	  Watchdog timer embedded into AT32AP700x devices. This will reboot
-	  your system when the timeout is reached.
-
 # BLACKFIN Architecture
 
 config BFIN_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 4b374b9e55e8..b7123bab9f8e 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -91,9 +91,6 @@ obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o
 obj-$(CONFIG_RTD119X_WATCHDOG) += rtd119x_wdt.o
 obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
 
-# AVR32 Architecture
-obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
-
 # BLACKFIN Architecture
 obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
 
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
deleted file mode 100644
index 81ba8920f127..000000000000
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * Watchdog driver for Atmel AT32AP700X devices
- *
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- * Errata: WDT Clear is blocked after WDT Reset
- *
- * A watchdog timer event will, after reset, block writes to the WDT_CLEAR
- * register, preventing the program to clear the next Watchdog Timer Reset.
- *
- * If you still want to use the WDT after a WDT reset a small code can be
- * insterted at the startup checking the AVR32_PM.rcause register for WDT reset
- * and use a GPIO pin to reset the system. This method requires that one of the
- * GPIO pins are available and connected externally to the RESET_N pin. After
- * the GPIO pin has pulled down the reset line the GPIO will be reset and leave
- * the pin tristated with pullup.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/watchdog.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-
-#define TIMEOUT_MIN		1
-#define TIMEOUT_MAX		2
-#define TIMEOUT_DEFAULT		TIMEOUT_MAX
-
-/* module parameters */
-static int timeout =  TIMEOUT_DEFAULT;
-module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout,
-		"Timeout value. Limited to be 1 or 2 seconds. (default="
-		__MODULE_STRING(TIMEOUT_DEFAULT) ")");
-
-static bool nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, bool, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
-		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-/* Watchdog registers and write/read macro */
-#define WDT_CTRL		0x00
-#define WDT_CTRL_EN		   0
-#define WDT_CTRL_PSEL		   8
-#define WDT_CTRL_KEY		  24
-
-#define WDT_CLR			0x04
-
-#define WDT_RCAUSE		0x10
-#define WDT_RCAUSE_POR		   0
-#define WDT_RCAUSE_EXT		   2
-#define WDT_RCAUSE_WDT		   3
-#define WDT_RCAUSE_JTAG		   4
-#define WDT_RCAUSE_SERP		   5
-
-#define WDT_BIT(name)		(1 << WDT_##name)
-#define WDT_BF(name, value)	((value) << WDT_##name)
-
-#define wdt_readl(dev, reg)				\
-	__raw_readl((dev)->regs + WDT_##reg)
-#define wdt_writel(dev, reg, value)			\
-	__raw_writel((value), (dev)->regs + WDT_##reg)
-
-struct wdt_at32ap700x {
-	void __iomem		*regs;
-	spinlock_t		io_lock;
-	int			timeout;
-	int			boot_status;
-	unsigned long		users;
-	struct miscdevice	miscdev;
-};
-
-static struct wdt_at32ap700x *wdt;
-static char expect_release;
-
-/*
- * Disable the watchdog.
- */
-static inline void at32_wdt_stop(void)
-{
-	unsigned long psel;
-
-	spin_lock(&wdt->io_lock);
-	psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
-	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
-	wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
-	spin_unlock(&wdt->io_lock);
-}
-
-/*
- * Enable and reset the watchdog.
- */
-static inline void at32_wdt_start(void)
-{
-	/* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
-	unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
-
-	spin_lock(&wdt->io_lock);
-	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-			| WDT_BF(CTRL_PSEL, psel)
-			| WDT_BF(CTRL_KEY, 0x55));
-	wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
-			| WDT_BF(CTRL_PSEL, psel)
-			| WDT_BF(CTRL_KEY, 0xaa));
-	spin_unlock(&wdt->io_lock);
-}
-
-/*
- * Pat the watchdog timer.
- */
-static inline void at32_wdt_pat(void)
-{
-	spin_lock(&wdt->io_lock);
-	wdt_writel(wdt, CLR, 0x42);
-	spin_unlock(&wdt->io_lock);
-}
-
-/*
- * Watchdog device is opened, and watchdog starts running.
- */
-static int at32_wdt_open(struct inode *inode, struct file *file)
-{
-	if (test_and_set_bit(1, &wdt->users))
-		return -EBUSY;
-
-	at32_wdt_start();
-	return nonseekable_open(inode, file);
-}
-
-/*
- * Close the watchdog device.
- */
-static int at32_wdt_close(struct inode *inode, struct file *file)
-{
-	if (expect_release == 42) {
-		at32_wdt_stop();
-	} else {
-		dev_dbg(wdt->miscdev.parent,
-			"unexpected close, not stopping watchdog!\n");
-		at32_wdt_pat();
-	}
-	clear_bit(1, &wdt->users);
-	expect_release = 0;
-	return 0;
-}
-
-/*
- * Change the watchdog time interval.
- */
-static int at32_wdt_settimeout(int time)
-{
-	/*
-	 * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
-	 * 2 ^ 16 allowing up to 2 seconds timeout.
-	 */
-	if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
-		return -EINVAL;
-
-	/*
-	 * Set new watchdog time. It will be used when at32_wdt_start() is
-	 * called.
-	 */
-	wdt->timeout = time;
-	return 0;
-}
-
-/*
- * Get the watchdog status.
- */
-static int at32_wdt_get_status(void)
-{
-	int rcause;
-	int status = 0;
-
-	rcause = wdt_readl(wdt, RCAUSE);
-
-	switch (rcause) {
-	case WDT_BIT(RCAUSE_EXT):
-		status = WDIOF_EXTERN1;
-		break;
-	case WDT_BIT(RCAUSE_WDT):
-		status = WDIOF_CARDRESET;
-		break;
-	case WDT_BIT(RCAUSE_POR):  /* fall through */
-	case WDT_BIT(RCAUSE_JTAG): /* fall through */
-	case WDT_BIT(RCAUSE_SERP): /* fall through */
-	default:
-		break;
-	}
-
-	return status;
-}
-
-static const struct watchdog_info at32_wdt_info = {
-	.identity	= "at32ap700x watchdog",
-	.options	= WDIOF_SETTIMEOUT |
-			  WDIOF_KEEPALIVEPING |
-			  WDIOF_MAGICCLOSE,
-};
-
-/*
- * Handle commands from user-space.
- */
-static long at32_wdt_ioctl(struct file *file,
-				unsigned int cmd, unsigned long arg)
-{
-	int ret = -ENOTTY;
-	int time;
-	void __user *argp = (void __user *)arg;
-	int __user *p = argp;
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		ret = copy_to_user(argp, &at32_wdt_info,
-				sizeof(at32_wdt_info)) ? -EFAULT : 0;
-		break;
-	case WDIOC_GETSTATUS:
-		ret = put_user(0, p);
-		break;
-	case WDIOC_GETBOOTSTATUS:
-		ret = put_user(wdt->boot_status, p);
-		break;
-	case WDIOC_SETOPTIONS:
-		ret = get_user(time, p);
-		if (ret)
-			break;
-		if (time & WDIOS_DISABLECARD)
-			at32_wdt_stop();
-		if (time & WDIOS_ENABLECARD)
-			at32_wdt_start();
-		ret = 0;
-		break;
-	case WDIOC_KEEPALIVE:
-		at32_wdt_pat();
-		ret = 0;
-		break;
-	case WDIOC_SETTIMEOUT:
-		ret = get_user(time, p);
-		if (ret)
-			break;
-		ret = at32_wdt_settimeout(time);
-		if (ret)
-			break;
-		/* Enable new time value */
-		at32_wdt_start();
-		/* fall through */
-	case WDIOC_GETTIMEOUT:
-		ret = put_user(wdt->timeout, p);
-		break;
-	}
-
-	return ret;
-}
-
-static ssize_t at32_wdt_write(struct file *file, const char __user *data,
-				size_t len, loff_t *ppos)
-{
-	/* See if we got the magic character 'V' and reload the timer */
-	if (len) {
-		if (!nowayout) {
-			size_t i;
-
-			/*
-			 * note: just in case someone wrote the magic
-			 * character five months ago...
-			 */
-			expect_release = 0;
-
-			/*
-			 * scan to see whether or not we got the magic
-			 * character
-			 */
-			for (i = 0; i != len; i++) {
-				char c;
-				if (get_user(c, data + i))
-					return -EFAULT;
-				if (c == 'V')
-					expect_release = 42;
-			}
-		}
-		/* someone wrote to us, we should pat the watchdog */
-		at32_wdt_pat();
-	}
-	return len;
-}
-
-static const struct file_operations at32_wdt_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.unlocked_ioctl	= at32_wdt_ioctl,
-	.open		= at32_wdt_open,
-	.release	= at32_wdt_close,
-	.write		= at32_wdt_write,
-};
-
-static int __init at32_wdt_probe(struct platform_device *pdev)
-{
-	struct resource	*regs;
-	int ret;
-
-	if (wdt) {
-		dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
-		return -EBUSY;
-	}
-
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!regs) {
-		dev_dbg(&pdev->dev, "missing mmio resource\n");
-		return -ENXIO;
-	}
-
-	wdt = devm_kzalloc(&pdev->dev, sizeof(struct wdt_at32ap700x),
-			GFP_KERNEL);
-	if (!wdt)
-		return -ENOMEM;
-
-	wdt->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
-	if (!wdt->regs) {
-		ret = -ENOMEM;
-		dev_dbg(&pdev->dev, "could not map I/O memory\n");
-		goto err_free;
-	}
-
-	spin_lock_init(&wdt->io_lock);
-	wdt->boot_status = at32_wdt_get_status();
-
-	/* Work-around for watchdog silicon errata. */
-	if (wdt->boot_status & WDIOF_CARDRESET) {
-		dev_info(&pdev->dev, "CPU must be reset with external "
-				"reset or POR due to silicon errata.\n");
-		ret = -EIO;
-		goto err_free;
-	} else {
-		wdt->users = 0;
-	}
-
-	wdt->miscdev.minor	= WATCHDOG_MINOR;
-	wdt->miscdev.name	= "watchdog";
-	wdt->miscdev.fops	= &at32_wdt_fops;
-	wdt->miscdev.parent	= &pdev->dev;
-
-	platform_set_drvdata(pdev, wdt);
-
-	if (at32_wdt_settimeout(timeout)) {
-		at32_wdt_settimeout(TIMEOUT_DEFAULT);
-		dev_dbg(&pdev->dev,
-			"default timeout invalid, set to %d sec.\n",
-			TIMEOUT_DEFAULT);
-	}
-
-	ret = misc_register(&wdt->miscdev);
-	if (ret) {
-		dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
-		goto err_free;
-	}
-
-	dev_info(&pdev->dev,
-		"AT32AP700X WDT at 0x%p, timeout %d sec (nowayout=%d)\n",
-		wdt->regs, wdt->timeout, nowayout);
-
-	return 0;
-
-err_free:
-	wdt = NULL;
-	return ret;
-}
-
-static int __exit at32_wdt_remove(struct platform_device *pdev)
-{
-	if (wdt && platform_get_drvdata(pdev) == wdt) {
-		/* Stop the timer before we leave */
-		if (!nowayout)
-			at32_wdt_stop();
-
-		misc_deregister(&wdt->miscdev);
-		wdt = NULL;
-	}
-	return 0;
-}
-
-static void at32_wdt_shutdown(struct platform_device *pdev)
-{
-	at32_wdt_stop();
-}
-
-#ifdef CONFIG_PM
-static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
-{
-	at32_wdt_stop();
-	return 0;
-}
-
-static int at32_wdt_resume(struct platform_device *pdev)
-{
-	if (wdt->users)
-		at32_wdt_start();
-	return 0;
-}
-#else
-#define at32_wdt_suspend NULL
-#define at32_wdt_resume NULL
-#endif
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:at32_wdt");
-
-static struct platform_driver at32_wdt_driver = {
-	.remove		= __exit_p(at32_wdt_remove),
-	.suspend	= at32_wdt_suspend,
-	.resume		= at32_wdt_resume,
-	.driver		= {
-		.name	= "at32_wdt",
-	},
-	.shutdown	= at32_wdt_shutdown,
-};
-
-module_platform_driver_probe(at32_wdt_driver, at32_wdt_probe);
-
-MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
-MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
-MODULE_LICENSE("GPL");