scripts/spelling.txt: add "followings" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

  followings||following

While we are here, add a missing colon in the boilerplate in DT binding
documents.  The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as
well.

I reworded "as the followings:" to "as follows:" for
drivers/usb/gadget/udc/renesas_usb3.c.

Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 files changed, 10 insertions, 10 deletions

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 4e5bf36c5f46..ef68232b5222 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2034,7 +2034,7 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
  *	This is to expedite speed down decisions right after device is
  *	initially configured.
  *
- *	The followings are speed down rules.  #1 and #2 deal with
+ *	The following are speed down rules.  #1 and #2 deal with
  *	DUBIOUS errors.
  *
  *	1. If more than one DUBIOUS_ATA_BUS or DUBIOUS_TOUT_HSM errors
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 8640bafeb471..a4fa6c82261e 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -21,7 +21,7 @@
       supports a variety of varients of Interphase ATM PCI (i)Chip adapter 
       card family (See www.iphase.com/products/ClassSheet.cfm?ClassID=ATM) 
       in terms of PHY type, the size of control memory and the size of 
-      packet memory. The followings are the change log and history:
+      packet memory. The following are the change log and history:
      
           Bugfix the Mona's UBR driver.
           Modify the basic memory allocation and dma logic.
diff --git a/drivers/atm/iphase.h b/drivers/atm/iphase.h
index 53ecac5a2161..2beacf2fc1ec 100644
--- a/drivers/atm/iphase.h
+++ b/drivers/atm/iphase.h
@@ -21,7 +21,7 @@
       supports a variety of varients of Interphase ATM PCI (i)Chip adapter 
       card family (See www.iphase.com/products/ClassSheet.cfm?ClassID=ATM) 
       in terms of PHY type, the size of control memory and the size of 
-      packet memory. The followings are the change log and history:
+      packet memory. The following are the change log and history:
      
           Bugfix the Mona's UBR driver.
           Modify the basic memory allocation and dma logic.
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 551a271353d2..dea04871b50d 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -1228,7 +1228,7 @@ static int __init devfreq_init(void)
 subsys_initcall(devfreq_init);
 
 /*
- * The followings are helper functions for devfreq user device drivers with
+ * The following are helper functions for devfreq user device drivers with
  * OPP framework.
  */
 
diff --git a/drivers/hwmon/g762.c b/drivers/hwmon/g762.c
index 6dca2fd3d303..6d1208b2b6d2 100644
--- a/drivers/hwmon/g762.c
+++ b/drivers/hwmon/g762.c
@@ -861,7 +861,7 @@ static ssize_t fan1_pulses_store(struct device *dev,
  * (i.e. closed or open-loop).
  *
  * Following documentation about hwmon's sysfs interface, a pwm1_enable node
- * should accept followings:
+ * should accept the following:
  *
  *  0 : no fan speed control (i.e. fan at full speed)
  *  1 : manual fan speed control enabled (use pwm[1-*]) (open-loop)
diff --git a/drivers/isdn/hardware/eicon/debug.c b/drivers/isdn/hardware/eicon/debug.c
index 576b7b4a3278..8bc2791bc39c 100644
--- a/drivers/isdn/hardware/eicon/debug.c
+++ b/drivers/isdn/hardware/eicon/debug.c
@@ -2049,7 +2049,7 @@ static int diva_dbg_cmp_key(const char *ref, const char *key) {
 /*
   In case trace filter starts with "C" character then
   all following characters are interpreted as command.
-  Followings commands are available:
+  Following commands are available:
   - single, trace single call at time, independent from CPN/CiPN
 */
 static int diva_mnt_cmp_nmbr(const char *nmbr) {
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ca77d235867f..f754453fe754 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3630,7 +3630,7 @@ static int __init pci_apply_final_quirks(void)
 fs_initcall_sync(pci_apply_final_quirks);
 
 /*
- * Followings are device-specific reset methods which can be used to
+ * Following are device-specific reset methods which can be used to
  * reset a single function if other methods (e.g. FLR, PM D0->D3) are
  * not available.
  */
diff --git a/drivers/staging/gs_fpgaboot/gs_fpgaboot.h b/drivers/staging/gs_fpgaboot/gs_fpgaboot.h
index 7b8cc3a25214..cd1eb2c4c940 100644
--- a/drivers/staging/gs_fpgaboot/gs_fpgaboot.h
+++ b/drivers/staging/gs_fpgaboot/gs_fpgaboot.h
@@ -39,7 +39,7 @@ struct fpgaimage {
 	const struct	firmware	*fw_entry;
 
 	/*
-	 * the followings can be read from bitstream,
+	 * the following can be read from bitstream,
 	 * but other image format should have as well
 	 */
 	char	filename[MAX_STR];
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index fb8fc34827ab..2218f91e92a6 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -1791,7 +1791,7 @@ static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev,
 
 	dev_dbg(dev, "%s: num_usb3_eps = %d\n", __func__, usb3->num_usb3_eps);
 	/*
-	 * This driver prepares pipes as the followings:
+	 * This driver prepares pipes as follows:
 	 *  - odd pipes = IN pipe
 	 *  - even pipes = OUT pipe (except pipe 0)
 	 */
@@ -1841,7 +1841,7 @@ static void renesas_usb3_init_ram(struct renesas_usb3 *usb3, struct device *dev,
 	memset(basead, 0, sizeof(basead));
 
 	/*
-	 * This driver prepares pipes as the followings:
+	 * This driver prepares pipes as follows:
 	 *  - all pipes = the same size as "ramsize_per_pipe"
 	 * Please refer to the "Method of Specifying RAM Mapping"
 	 */