summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-scan.c
AgeCommit message (Collapse)AuthorFilesLines
2012-06-06iwlwifi: move DVM code into subdirectoryJohannes Berg1-1171/+0
Since we're working on another mode/driver inside iwlwifi, move the current one into a subdirectory to more cleanly separate the code. While at it, rename all the files. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: clear STATUS_SCAN_HW when PAN_PARAMS failsIlan Peer1-1/+3
The STATUS_SCAN_HW is set before calling iwlagn_set_pan_params (used as an input to calculate slot time allocation). The bit needs to be cleared in case sending the command fails. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: use mac80211 channels for reset scanJohannes Berg1-20/+8
Instead of iterating our own channel list, use the mac80211 channel list since that's already processed per band and thus makes for less code. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: trust mac80211 channel settingJohannes Berg1-11/+1
mac80211 will never set, switch to, or scan on an invalid channel, so remove the code to validate the channels against the driver channel list. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: handle race condition in ROC flowIlan Peer1-10/+41
When a remain on channel request from mac80211 is followed by a request to tx a mgmt frame offchannel, it is possible that the remain on channel expires before the device reported the tx status for the frame. This causes a race condition in mac80211. To fix this, delay the ROC notification to mac80211 until the device reported the Tx status for all frames in the aux queue. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-05-16iwlwifi: invert the order of ssid list in scan cmdDavid Spinadel1-1/+5
The firmware inverts the order of ssid list of scan command, we should invert the order before sending the command, in order to get probe requests sent in wanted order. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16iwlwifi: disable default wildcard ssid scanDavid Spinadel1-9/+22
iwl_fill_probe_request has used to add a wildcard ssid IE to any probe request template, now it's disabled and it will send wildcard ssid only for full scan. Instead, the highest priority ssid is set to the template. Due to adding high priority SSID to the template, it reduce IE len, but since we had only 260 bytes for IEs before changing allocation size to be dynamic, now we should have a bit more room for IEs. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16iwlwifi: fix scan_cmd_size allocationDavid Spinadel1-5/+12
Allocate scan command with dynamic size based on uCode capability and num of channels. This isn't an important fix as the previous allocation was always too large as it added the scan command size but later subtracted it (which meant it was supposed to be part of the max scan size.) Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23iwlwifi: remove TX/RX frame statisticsJohannes Berg1-1/+0
Keeping statistics per frame type really isn't very useful, and needs a huge amount of code so remove it. Since that is the only thing in iwl-core.{c,h} now, those files can be killed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-18iwlwifi: op_mode holds its pointer to the configEmmanuel Grumbach1-6/+6
Instead of using the shared area that we be killed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-12iwlwifi: move hw_params into privJohannes Berg1-4/+4
The hw_params are mostly values that are derived from the actual hardware config. As such, while it is possible that MVM will require similar ones, it makes more sense -- at least for now -- to put them into the DVM struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: split POWER_PMI status bitDon Fry1-1/+1
Move the POWER_PMI to the op_mode where it is changed. The trans needs to check it frequently, so shadow the status in the trans and update it in trans when it infrequently changes. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move FW_ERROR to privDon Fry1-1/+1
The op_mode should check for FW_ERROR before calling send_cmd. This removes the need to test for FW_ERROR in the trans layer. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move iwl_get_single_channel_number and mark it staticMeenakshi Venkataraman1-0/+40
iwl_get_single_channel_number is used only in iwl-scan.c, move it there and mark it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: use scan while idleJohannes Berg1-2/+6
As idle is just a deep powersave mode for the device, it will easily scan while idle since that turns off powersave. This reduces the number of commands sent to the device when scanning. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: remove scan_rx_antennasJohannes Berg1-3/+0
This is not (no longer?) used by any device so just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: more status bit factoringDon Fry1-25/+25
Continue splitting the status bits between transport and op_mode. All but a few are separated. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: make iwl_fill_probe_req staticJohannes Berg1-49/+49
This function is only used in iwl-scan.c, so if we move it up a little in the file it can be made static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move packet to transportJohannes Berg1-11/+10
The base packet structure will (hopefully) be the same for all transports, but what is in it differs. Remove the union of all the possible contents and move the packet itself into the transport header file. This requires changing all users of the union to just use pkt->data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move mutex out of sharedJohannes Berg1-16/+16
Now the mutex no longer needs to be shared, so move it into iwl_priv. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: add wrappers for command sendingJohannes Berg1-2/+2
Add wrappers to send commands from the DVM op-mode (which essentially consists of the current driver). This will allow us to move specific sanity checks there. Also, this removes iwl_trans_send_cmd_pdu() since that can now be taken care of in the DVM-specific wrapper. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: don't pass iwl_rx_mem_buffer to upper layersJohannes Berg1-4/+4
struct iwl_rx_mem_buffer implementation details (DMA address, list pointers) that the upper layers don't need. Introduce iwl_rx_cmd_buffer that is passed upstream and only contains the needed data (the page). Additionally, access this data only via accessor functions, allowing us to change the implementation in the future. These accessors are rxb_addr() (as before) and rxb_steal_page() to take ownership of the data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: pass response packet directlyJohannes Berg1-2/+2
When CMD_WANT_SKB is set for a (synchronous) command, the response is passed back to the caller which is then responsible for freeing it. Make this more abstract with real API, passing directly the response packet in the new cmd.resp_pkt member and also introduce iwl_free_resp() to free the pages -- this way the upper layers don't have to directly touch the page implementation. NOTE: This breaks IDI -- the new code isn't reflected there yet! Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06iwlwifi: make EXIT_PENDING depend on mac80211Johannes Berg1-2/+1
There's no reason to set EXIT_PENDING when we start removing the module, as mac80211 will cleanly shut down the device in this case. Additionally, there's no point in rejecting commands to the device when we're cleaning up as that only leads to unwanted errors from mac80211 being printed, such as failed to remove key (...) from hardware (-16) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-17iwlwifi: move workqueue to privJohannes Berg1-5/+5
In order to separate the different parts of the driver better, we are reducing the shared data. This moves the workqueue to "priv", and removes it from the transport. To do this, simply use schedule_work() in the transport. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-01-30iwlwifi: always restrict scan dwell in P2PJohannes Berg1-3/+18
Whenever the PAN (P2P) context is active, it has timers in the uCode that prevent sleep, so scanning can't be out of channel for more than the beacon interval programmed into the device. Before this patch, a full scan including any passive channels when P2P was active would stall forever because it wouldn't find time to execute the passive requests (for default beacon intervals of 100 TU.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: update CopyrightWey-Yi Guy1-1/+1
Update Copyright to 2012 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-16wireless: iwlwifi: iwl-scan.c: Fix build warningFabio Estevam1-1/+1
Fix the following build warning: drivers/net/wireless/iwlwifi/iwl-scan.c: In function ‘iwlagn_request_scan’: drivers/net/wireless/iwlwifi/iwl-scan.c:572: warning: ‘cmd_len’ may be used uninitialized in this function Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-16iwlwifi: move iwl_cfg from iwl_priv to iwl_sharedDon Fry1-8/+8
Move the configuration pointer from the upper level iwl_priv to the lower level iwl_shared structure, with associated code fixes. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-11-11iwlagn: don't always split remain-on-channelJohannes Berg1-0/+2
Due to the P2P context always having the associated bit set when we got to this code, we were splitting up the remain-on-channel durations unconditionally. This isn't needed -- if the P2P context is in P2P device type mode it doesn't impose restrictions on timing to skip it in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11iwlwifi: move hw_scan into _mac80211 fileWey-Yi Guy1-45/+0
iwlagn_mac_hw_scan should belong to _mac80211 callback. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-08iwlagn: use 6 Mbps rate for no-CCK scansJohannes Berg1-1/+2
When userspace requested that a scan not be done with CCK rates, use 6 Mbps. This is used for example for P2P scanning. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: move iwl_enable_rfkill_int and kill iwl-helpers.hEmmanuel Grumbach1-1/+0
Move iwl_enable_rfkill_int to iwl-core.h, and remove the empty iwl-helpers.h Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: merge station management functionsWey-Yi Guy1-1/+0
After driver split, no need to separate station management functions in two files, merge it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: rename all the mac80211 callback functionsWey-Yi Guy1-1/+1
Use the same calling style for all the mac80211 callback functions Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27iwlagn: fix scan complete processingJohannes Berg1-4/+32
When we cancel a scan, the completion runs only from the workqueue. This can cause the remain-on-channel scan to fail when another one was just canceled, because we're still aborting it. To fix this, run the completion inline with the lock still held before returning from iwl_scan_cancel_timeout(). Also, to avoid the scan complete work from completing a new scan prematurely, add a new STATUS_SCAN_COMPLETE bit. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27iwlagn: move iwl_process_scan_complete upJohannes Berg1-54/+54
To make the next patch easier to read, move the function up, it'll be needed earlier in this file in the next patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27iwlagn: refactor scan completeJohannes Berg1-8/+11
We'll need to be able to run scan complete inline, not from the workqueue, so refactor it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27iwlagn: make iwl_scan_cancel_timeout voidJohannes Berg1-3/+1
The return value of iwl_scan_cancel_timeout() isn't used anywhere, so let's just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27iwlagn: fix dangling scan requestJohannes Berg1-14/+16
If iwl_scan_initiate() fails for any reason, priv->scan_request and priv->scan_vif are left dangling. This can lead to a crash later when iwl_bg_scan_completed() tries to run a pending scan request. In practice, this seems to be very rare due to the STATUS_SCANNING check earlier. That check, however, is wrong -- it should allow a scan to be queued when a reset/roc scan is going on. When a normal scan is already going on, a new one can't be issued by mac80211, so that code can be removed completely. I introduced this bug when adding off-channel support in commit 266af4c745952e9bebf687dd68af58df553cb59d. Cc: stable@kernel.org [3.0] Reported-by: Peng Yan <peng.yan@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27iwlagn: add debugging to show probe related info in scan notificationWey-Yi Guy1-0/+2
Add debugging to show the status of probe in scan notification to help debug probe related issues Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-21iwlagn: remove the callback in host commandsEmmanuel Grumbach1-8/+17
Before this patch, the upper layer could register a callback for each host command. This mechanism allowed the upper layer to have different callbacks for the same command ID. In fact, it wasn't used and the rx_handlers is enough: same callback for all the command with a specific command ID. The iwl_send_add_station needs the access the command that was sent while handling the response (regardless if the command was sent in SYNC or ASYNC mode). So now, all the handlers receive the host command that was sent. This implies a change in the handler signature. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-21iwlagn: split remain-on-channelJohannes Berg1-39/+60
If we're associated and want to do P2P at the same time, the scan for remain-on-channel is currently limited to 80ms because of the way the device will behave in that case. Instead of doing that, split up the dwell times into little pieces. It will not actually be a single big dwell time then, but will be close enough. This improves robustness of P2P in such scenarios. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-21iwlagn: move scan code to scan fileJohannes Berg1-6/+433
Since the driver split there's no longer a need to have the scan code scattered across multiple files, so move it all back to iwl-scan.c Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: move iwl_free_pages to iwl-shared.hEmmanuel Grumbach1-1/+1
This helper is used by the transport and the upper layer. Kill __iwl_free_pages which was used in the transport only. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: move all iwl_is_XXX helpers to iwl-shared.hEmmanuel Grumbach1-2/+2
Logic move after all priv->status moved to struct iwl_shared Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: bus layer chooses its transport layerEmmanuel Grumbach1-1/+1
Remove iwl_transport_register which was a W/A. The bus layer knows what transport to use. So now, the bus layer gives the upper layer a pointer to the iwl_trans_ops struct that it wants to use. The upper layer then, allocates the desired transport layer using iwl_trans_ops->alloc function. As a result of this, priv->trans, no longer exists, priv holds a pointer to iwl_shared, which holds a pointer to iwl_trans. This required to change all the calls to the transport layer from upper layer. While we were at it, trans_X inlines have been renamed to iwl_trans_X to avoid confusions, which of course required to rename the functions inside the transport layer because of conflicts in names. So the static API functions inside the transport layer implementation have been renamed to iwl_trans_pcie_X. Until now, the IRQ / Tasklet were initialized in iwl_transport_layer. This is confusing since the registration doesn't mean to request IRQ, so I added a handler for that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: priv->mutex moves to iwl_sharedEmmanuel Grumbach1-16/+16
Since it is used by all the layers, it needs to move to iwl_shared. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: priv->status moves to iwl_sharedEmmanuel Grumbach1-22/+22
Since it is used by all the layers, it needs to move to iwl_shared. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: workqueue moves to iwl_sharedEmmanuel Grumbach1-5/+6
Since it is used by all the layers, it needs to move to iwl_shared. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 03:58:47 +0000