summaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)AuthorFilesLines
2014-07-06mei: me: fix hw ready reset flowTomas Winkler1-7/+7
commit b04ada92ffaabb868497a1fce8e4f6bf74e5488f upstream. We cleared H_RST for H_CSR on spurious interrupt generated when ME_RDY while cleared and not while ME_RDY is set. The spurious interrupt is not delivered on all platforms in this case the driver may fail to initialize. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06mei: me: read H_CSR after asserting resetTomas Winkler1-1/+13
commit c40765d919d25d2d44d99c4ce39e48808f137e1e upstream. According the spec the host should read H_CSR again after asserting reset H_RST to ensure that reset was read by the firmware Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-16mei: me: drop harmful wait optimizationTomas Winkler1-3/+1
commit 07cd7be3d92eeeae1f92a017f2cfe4fdd9256526 upstream. It my take time till ME_RDY will be cleared after the reset, so we cannot check the bit before we got the interrupt Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06mei: me: do not load the driver if the FW doesn't support MEI interfaceTomas Winkler2-7/+28
commit 5e6533a6f52f1a8283b2f818f5828be99a417dd6 upstream. NM and SPS FW types that may run on ME device on server platforms do not have valid MEI/HECI interface and driver should not be bound to it as this might lead to system hung. In practice not all BIOSes effectively hide such devices from the OS and in some cases it is not possible. We determine FW type by examining Host FW status registers in order to unbind the driver. In this patch we are adding check for ME on Cougar Point, Lynx Point Devices Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06mei: set client's read_cb to NULL when flow control failsChao Bi1-1/+3
commit accb884b32e82f943340688c9cd30290531e73e0 upstream. In mei_cl_read_start(), if it fails to send flow control request, it will release "cl->read_cb" but forget to set pointer to NULL, leaving "cl->read_cb" still pointing to random memory, next time this client is operated like mei_release(), it has chance to refer to this wrong pointer. Fixes: PANIC at kfree in mei_release() [228781.826904] Call Trace: [228781.829737] [<c16249b8>] ? mei_cl_unlink+0x48/0xa0 [228781.835283] [<c1624487>] mei_io_cb_free+0x17/0x30 [228781.840733] [<c16265d8>] mei_release+0xa8/0x180 [228781.845989] [<c135c610>] ? __fsnotify_parent+0xa0/0xf0 [228781.851925] [<c1325a69>] __fput+0xd9/0x200 [228781.856696] [<c1325b9d>] ____fput+0xd/0x10 [228781.861467] [<c125cae1>] task_work_run+0x81/0xb0 [228781.866821] [<c1242e53>] do_exit+0x283/0xa00 [228781.871786] [<c1a82b36>] ? kprobe_flush_task+0x66/0xc0 [228781.877722] [<c124eeb8>] ? __dequeue_signal+0x18/0x1a0 [228781.883657] [<c124f072>] ? dequeue_signal+0x32/0x190 [228781.889397] [<c1243744>] do_group_exit+0x34/0xa0 [228781.894750] [<c12517b6>] get_signal_to_deliver+0x206/0x610 [228781.901075] [<c12018d8>] do_signal+0x38/0x100 [228781.906136] [<c1626d1c>] ? mei_read+0x42c/0x4e0 [228781.911393] [<c12600a0>] ? wake_up_bit+0x30/0x30 [228781.916745] [<c16268f0>] ? mei_poll+0x120/0x120 [228781.922001] [<c1324be9>] ? vfs_read+0x89/0x160 [228781.927158] [<c16268f0>] ? mei_poll+0x120/0x120 [228781.932414] [<c133ca34>] ? fget_light+0x44/0xe0 [228781.937670] [<c1324e58>] ? SyS_read+0x68/0x80 [228781.942730] [<c12019f5>] do_notify_resume+0x55/0x70 [228781.948376] [<c1a7de5d>] work_notifysig+0x29/0x30 [228781.953827] [<c1a70000>] ? bad_area+0x5/0x3e Signed-off-by: Chao Bi <chao.bi@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22mei: don't unset read cb ptr on resetAlexander Usyskin1-1/+0
commit 5cb906c7035f03a3a44fecece9d3ff8fcc75d6e0 upstream. Don't set read callback to NULL during reset as this leads to memory leak of both cb and its buffer. The memory is correctly freed during mei_release. The memory leak is detectable by kmemleak if application has open read call while system is going through suspend/resume. unreferenced object 0xecead780 (size 64): comm "AsyncTask #1", pid 1018, jiffies 4294949621 (age 152.440s) hex dump (first 32 bytes): 00 01 10 00 00 02 20 00 00 bf 30 f1 00 00 00 00 ...... ...0..... 00 00 00 00 00 00 00 00 36 01 00 00 00 70 da e2 ........6....p.. backtrace: [<c1a60aec>] kmemleak_alloc+0x3c/0xa0 [<c131ed56>] kmem_cache_alloc_trace+0xc6/0x190 [<c16243c9>] mei_io_cb_init+0x29/0x50 [<c1625722>] mei_cl_read_start+0x102/0x360 [<c16268f3>] mei_read+0x103/0x4e0 [<c1324b09>] vfs_read+0x89/0x160 [<c1324d5f>] SyS_read+0x4f/0x80 [<c1a7b318>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff unreferenced object 0xe2da7000 (size 512): comm "AsyncTask #1", pid 1018, jiffies 4294949621 (age 152.440s) hex dump (first 32 bytes): 00 6c da e2 7c 00 00 00 00 00 00 00 c0 eb 0c 59 .l..|..........Y 1b 00 00 00 01 00 00 00 02 10 00 00 01 00 00 00 ................ backtrace: [<c1a60aec>] kmemleak_alloc+0x3c/0xa0 [<c131f127>] __kmalloc+0xe7/0x1d0 [<c162447e>] mei_io_cb_alloc_resp_buf+0x2e/0x60 [<c162574c>] mei_cl_read_start+0x12c/0x360 [<c16268f3>] mei_read+0x103/0x4e0 [<c1324b09>] vfs_read+0x89/0x160 [<c1324d5f>] SyS_read+0x4f/0x80 [<c1a7b318>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22mei: clear write cb from waiting list on resetAlexander Usyskin1-1/+9
commit 30c54df7cb9b15b222529a028390b9c9582dd65e upstream. Clear write callbacks sitting in write_waiting list on reset. Otherwise these callbacks are left dangling and cause memory leak. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11mei: add 9 series PCH mei device idsTomas Winkler2-2/+7
commit 76a9635979e543f04a5885198e68ff28e3311b67 upstream. And Lynx Point H Refresh and Wildcat Point LP device ids. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11mei: me: add Lynx Point Wellsburg work station device idTomas Winkler2-0/+2
commit 838b3a6d62413b336f3dde15ecff161070358957 upstream. add missing device id for LPT based work station Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11SCSI: enclosure: fix WARN_ON in dual path device removingJames Bottomley1-0/+7
commit a1470c7bf3a4676e62e4c0fb204e339399eb5c59 upstream. Bug report from: wenxiong@linux.vnet.ibm.com The issue is happened in dual controller configuration. We got the sysfs warnings when rmmod the ipr module. enclosure_unregister() in drivers/msic/enclosure.c, call device_unregister() for each componment deivce, device_unregister() ->device_del()->kobject_del() ->sysfs_remove_dir(). In sysfs_remove_dir(), set kobj->sd = NULL. For each componment device, enclosure_component_release()->enclosure_remove_links()->sysfs_remove_link() in which checking kobj->sd again, it has been set as NULL when doing device_unregister. So we saw all these sysfs WARNING. Tested-by: wenxiong@linux.vnet.ibm.com Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29mei: nfc: fix memory leak in error pathTomas Winkler1-4/+6
commit 4bff7208f332b2b1d7cf1338e50527441283a198 upstream. The flow may reach the err label without freeing cl and cl_info cl and cl_info weren't assigned to ndev->cl and cl_info so they weren't freed in mei_nfc_free called on error path Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-20misc: atmel_pwm: add deferred-probing supportJohan Hovold1-2/+4
commit 5c6d6fd1564138ad048564e48639f842714a90c6 upstream. Two drivers (atmel-pwm-bl and leds-atmel-pwm) currently depend on the atmel_pwm driver to have bound to any pwm-device before their devices are probed. Support deferred probing of such devices by making sure to return -EPROBE_DEFER from pwm_channel_alloc when no pwm-device has yet been bound. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05mei: cancel stall timers in mei_resetAlexander Usyskin2-0/+4
commit 4a704575cc1afb3b848f096778fa9b8d7b3d5813 upstream. Unset init_clients_timer and amthif_stall_timers in mei_reset in order to cancel timer ticking and hence avoid recursive reset calls. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05mei: bus: stop wait for read during cl state transitionTomas Winkler3-8/+14
commit e2b31644e999e8bfe3efce880fb32840299abf41 upstream. Bus layer omitted check for client state transition while waiting for read completion The client state transition may occur for example as result of firmware initiated reset Add mei_cl_is_transitioning wrapper to reduce the code repetition.: Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05mei: make me client counters less error proneTomas Winkler2-7/+9
commit 1aee351a739153529fbb98ee461777b2abd5e1c9 upstream. 1. u8 counters are prone to hard to detect overflow: make them unsigned long to match bit_ functions argument type 2. don't check me_clients_num for negativity, it is unsigned. 3. init all the me client counters from one place Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07drivers/misc/hpilo: Correct panic when an AUX iLO is detectedMark Rusk1-2/+2
commit eefbc594abbb1b7e6e7eeadb65ae7c7538474210 upstream. Using an uninitialized variable 'devnum' after 'goto out;' was causing panic. Just go ahead and return, we need to ignore AUX iLO devs. Oops: 0002 [#1] SMP . . . RIP [<ffffffffa033e270>] ilo_probe+0xec/0xe7c [hpilo] Signed-off-by: Mark Rusk <mark.rusk@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07mei: me: fix hardware reset flowTomas Winkler1-5/+3
commit ff96066e3171acdea356b331163495957cb833d0 upstream. Both H_IS and H_IE needs to be set to receive H_RDY interrupt 1. Assert H_IS to clear the interrupts during hw reset and use mei_me_reg_write instead of mei_hcsr_set as the later strips down the H_IS 2. fix interrupt disablement embarrassing typo hcsr |= ~H_IE -> hcsr &= ~H_IE; this will remove the unwanted interrupt on power down 3. remove useless debug print outs Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29mei: me: fix waiting for hw readyTomas Winkler1-3/+7
commit dab9bf41b23fe700c4a74133e41eb6a21706031e upstream. 1. MEI_INTEROP_TIMEOUT is in seconds not in jiffies so we use mei_secs_to_jiffies macro While cold boot is fast this is relevant in resume 2. wait_event_interruptible_timeout can return with -ERESTARTSYS so do not override it with -ETIMEDOUT 3.Adjust error message Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29mei: don't have to clean the state on power upTomas Winkler1-1/+2
commit 99f22c4ef24cf87b0dae6aabe6b5e620b62961d9 upstream. When powering up, we don't have to clean up the device state nothing is connected. Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29mei: me: fix reset state machineTomas Winkler1-1/+3
commit 315a383ad7dbd484fafb93ef08038e3dbafbb7a8 upstream. ME HW ready bit is down after hw reset was asserted or on error. Only on error we need to enter the reset flow, additional reset need to be prevented when reset was triggered during initialization , power up/down or a reset is already in progress Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-14Merge tag 'char-misc-3.10-rc5' of ↵Linus Torvalds3-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc fixes from Greg Kroah-Hartman: "Here are some small mei driver fixes for 3.10-rc6 that fix some reported problems" * tag 'char-misc-3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: me: clear interrupts on the resume path mei: nfc: fix nfc device freeing mei: init: Flush scheduled work before resetting the device
2013-06-13mei: me: clear interrupts on the resume pathTomas Winkler1-0/+1
We need to clear pending interrupts on the resume path. This brings the device into defined state before starting the reset flow This should solve suspend/resume issues: mei_me : wait hw ready failed. status = 0x0 mei_me : version message write failed Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13mei: nfc: fix nfc device freeingTomas Winkler1-0/+2
The nfc_dev is a static variable and is not cleaned properly upon reset mainly ndev->cl and ndev->cl_info are not set to NULL after freeing which mei_stop:198: mei_me 0000:00:16.0: stopping the device. [ 404.253427] general protection fault: 0000 [#2] SMP [ 404.253437] Modules linked in: mei_me(-) binfmt_misc snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave fuse loop dm_mod hid_generic usbhid hid coretemp acpi_cpufreq mperf kvm_intel kvm crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw gf128mul snd_hda_codec_hdmi glue_helper aes_x86_64 e1000e snd_hda_intel snd_hda_codec ehci_pci iTCO_wdt iTCO_vendor_support ehci_hcd snd_hwdep xhci_hcd snd_pcm usbcore ptp mei sg microcode snd_timer pps_core i2c_i801 snd pcspkr battery rtc_cmos lpc_ich mfd_core soundcore usb_common snd_page_alloc ac ext3 jbd mbcache drm_kms_helper drm intel_agp i2c_algo_bit intel_gtt i2c_core sd_mod crc_t10dif thermal fan video button processor thermal_sys hwmon ahci libahci libata scsi_mod [last unloaded: mei_me] [ 404.253591] CPU: 0 PID: 5551 Comm: modprobe Tainted: G D W 3.10.0-rc3 #1 [ 404.253611] task: ffff880143cd8300 ti: ffff880144a2a000 task.ti: ffff880144a2a000 [ 404.253619] RIP: 0010:[<ffffffff81334e5d>] [<ffffffff81334e5d>] device_del+0x1d/0x1d0 [ 404.253638] RSP: 0018:ffff880144a2bcf8 EFLAGS: 00010206 [ 404.253645] RAX: 2020302e30202030 RBX: ffff880144fdb000 RCX: 0000000000000086 [ 404.253652] RDX: 0000000000000001 RSI: 0000000000000086 RDI: ffff880144fdb000 [ 404.253659] RBP: ffff880144a2bd18 R08: 0000000000000651 R09: 0000000000000006 [ 404.253666] R10: 0000000000000651 R11: 0000000000000006 R12: ffff880144fdb000 [ 404.253673] R13: ffff880149371098 R14: ffff880144482c00 R15: ffffffffa04710e0 [ 404.253681] FS: 00007f251c59a700(0000) GS:ffff88014e200000(0000) knlGS:0000000000000000 [ 404.253689] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 404.253696] CR2: ffffffffff600400 CR3: 0000000145319000 CR4: 00000000001407f0 [ 404.253703] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 404.253710] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 404.253716] Stack: [ 404.253720] ffff880144fdb000 ffff880143ffe000 ffff880149371098 ffffffffa0471000 [ 404.253732] ffff880144a2bd38 ffffffff8133502d ffff88014e20cf48 ffff880143ffe1d8 [ 404.253744] ffff880144a2bd48 ffffffffa02a4749 ffff880144a2bd58 ffffffffa02a4ba1 [ 404.253755] Call Trace: [ 404.253766] [<ffffffff8133502d>] device_unregister+0x1d/0x60 [ 404.253787] [<ffffffffa02a4749>] mei_cl_remove_device+0x9/0x10 [mei] [ 404.253804] [<ffffffffa02a4ba1>] mei_nfc_host_exit+0x21/0x30 [mei] [ 404.253819] [<ffffffffa029c2dd>] mei_stop+0x3d/0x90 [mei] [ 404.253830] [<ffffffffa046e220>] mei_me_remove+0x60/0xe0 [mei_me] [ 404.253843] [<ffffffff81278f37>] pci_device_remove+0x37/0xb0 [ 404.253855] [<ffffffff81337c68>] __device_release_driver+0x98/0x100 [ 404.253865] [<ffffffff81337d80>] driver_detach+0xb0/0xc0 [ 404.253876] [<ffffffff81336b4f>] bus_remove_driver+0x8f/0x120 [ 404.253891] [<ffffffff81075990>] ? try_to_wake_up+0x2b0/0x2b0 [ 404.253903] [<ffffffff81338a48>] driver_unregister+0x58/0x90 [ 404.253913] [<ffffffff8127906b>] pci_unregister_driver+0x2b/0xb0 [ 404.253924] [<ffffffffa046f244>] mei_me_driver_exit+0x10/0xdcc [mei_me] [ 404.253936] [<ffffffff810a50d8>] SyS_delete_module+0x198/0x2b0 [ 404.253949] [<ffffffff814850d9>] ? do_page_fault+0x9/0x10 [ 404.253961] [<ffffffff81489692>] system_call_fastpath+0x16/0x1b [ 404.253967] Code: 41 5c 41 5d 41 5e 41 5f c9 c3 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 49 89 fc 53 48 8b 87 88 00 00 00 4c 8b 37 48 85 c0 74 18 <48> 8b 78 78 4c 89 e2 be 02 00 00 00 48 81 c7 f8 00 00 00 e8 3b [ 404.254048] RIP [<ffffffff81334e5d>] device_del+0x1d/0x1d0 Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13mei: init: Flush scheduled work before resetting the deviceSamuel Ortiz1-2/+2
Flushing pending work items before resetting the device makes more sense than doing so afterwards. Some of them, like e.g. the NFC initialization one, find themselves with client IDs changed after the reset, eventually leading to trigger a client.c:mei_me_cl_by_id() warning after a few modprobe/rmmod cycles. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-12drivers/misc/sgi-gru/grufile.c: fix info leak in gru_get_config_info()Dan Carpenter1-0/+1
The "info.fill" array isn't initialized so it can leak uninitialized stack information to user space. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Robin Holt <holt@sgi.com> Acked-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-23Merge tag 'char-misc-3.10-rc2' of ↵Linus Torvalds3-10/+15
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg Kroah-Hartman: "Here are some small char/misc driver fixes for 3.10-rc2. Nothing major here, just a number of fixes for things that people have reported, and a MAINTAINERS update for the recent changes for the hyperv files that went into 3.10-rc1." * tag 'char-misc-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: ttyprintk: Fix NULL pointer deref by setting tty_port ops after initializing port uio: UIO_DMEM_GENIRQ should depend on HAS_DMA MAINTAINERS: update Hyper-V file list mei: bus: Reset event_cb when disabling a device Drivers: hv: Fix a bug in get_vp_index() mei: fix out of array access to me clients array Char: lp, protect LPGETSTATUS with port_mutex dummy-irq: require the user to specify an IRQ number
2013-05-22Merge tag 'fixes-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio fixes from Rusty Russell: "A build fix and a uapi exposure fix. The build fix is later than I liked, but my first version broke linux-next due to overzealous header clean." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_console: fix uapi header Hoist memcpy_fromiovec/memcpy_toiovec into lib/
2013-05-21mei: bus: Reset event_cb when disabling a deviceSamuel Ortiz1-0/+2
After cancelling all reads from the disable hook, we need to reset the event_cb pointer as well or else we won't be able to set a new one up when re-enabling the device. Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-21mei: fix out of array access to me clients arrayTomas Winkler1-9/+8
The patch 9f81abdac362: "mei: implement mei_cl_connect function" from Jan 8, 2013, leads to the following static checker warning: "drivers/misc/mei/main.c:522 mei_ioctl_connect_client() warn: check 'dev->me_clients[]' for negative offsets (-2)" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20Hoist memcpy_fromiovec/memcpy_toiovec into lib/Rusty Russell2-2/+2
ERROR: "memcpy_fromiovec" [drivers/vhost/vhost_scsi.ko] undefined! That function is only present with CONFIG_NET. Turns out that crypto/algif_skcipher.c also uses that outside net, but it actually needs sockets anyway. In addition, commit 6d4f0139d642c45411a47879325891ce2a7c164a added CONFIG_NET dependency to CONFIG_VMCI for memcpy_toiovec, so hoist that function and revert that commit too. socket.h already includes uio.h, so no callers need updating; trying only broke things fo x86_64 randconfig (thanks Fengguang!). Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-05-18drivers/misc: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-05-16dummy-irq: require the user to specify an IRQ numberJonathan Corbet1-1/+5
Make sure that we let the user know that without specifying IRQ#, dummy-irq driver is useless. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-05-01proc: Supply a function to remove a proc entry by PDEDavid Howells1-1/+1
Supply a function (proc_remove()) to remove a proc entry (and any subtree rooted there) by proc_dir_entry pointer rather than by name and (optionally) root dir entry pointer. This allows us to eliminate all remaining pde->name accesses outside of procfs. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Grant Likely <grant.likely@linaro.or> cc: linux-acpi@vger.kernel.org cc: openipmi-developer@lists.sourceforge.net cc: devicetree-discuss@lists.ozlabs.org cc: linux-pci@vger.kernel.org cc: netdev@vger.kernel.org cc: netfilter-devel@vger.kernel.org cc: alsa-devel@alsa-project.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-30Merge branch 'for-linus' of ↵Linus Torvalds7-25/+28
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small code cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits) mm: Convert print_symbol to %pSR gfs2: Convert print_symbol to %pSR m32r: Convert print_symbol to %pSR iostats.txt: add easy-to-find description for field 6 x86 cmpxchg.h: fix wrong comment treewide: Fix typo in printk and comments doc: devicetree: Fix various typos docbook: fix 8250 naming in device-drivers pata_pdc2027x: Fix compiler warning treewide: Fix typo in printks mei: Fix comments in drivers/misc/mei treewide: Fix typos in kernel messages pm44xx: Fix comment for "CONFIG_CPU_IDLE" doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP" mmzone: correct "pags" to "pages" in comment. kernel-parameters: remove outdated 'noresidual' parameter Remove spurious _H suffixes from ifdef comments sound: Remove stray pluses from Kconfig file radio-shark: Fix printk "CONFIG_LED_CLASS" doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE ...
2013-04-30Merge branch 'x86-paravirt-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 paravirt update from Ingo Molnar: "Various paravirtualization related changes - the biggest one makes guest support optional via CONFIG_HYPERVISOR_GUEST" * 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, wakeup, sleep: Use pvops functions for changing GDT entries x86, xen, gdt: Remove the pvops variant of store_gdt. x86-32, gdt: Store/load GDT for ACPI S3 or hibernation/resume path is not needed x86-64, gdt: Store/load GDT for ACPI S3 or hibernate/resume path is not needed. x86: Make Linux guest support optional x86, Kconfig: Move PARAVIRT_DEBUG into the paravirt menu
2013-04-29misc: generic on-chip SRAM allocation driverPhilipp Zabel3-0/+131
This driver requests and remaps a memory region as configured in the device tree. It serves memory from this region via the genalloc API. It optionally enables the SRAM clock. Other drivers can retrieve the genalloc pool from a phandle pointing to this drivers' device node in the device tree. The allocation granularity is hard-coded to 32 bytes for now, to make the SRAM driver useful for the 6502 remoteproc driver. There is overhead for bigger SRAMs, where only a much coarser allocation granularity is needed: At 32 bytes minimum allocation size, a 256 KiB SRAM needs a 1 KiB bitmap to track allocations. [akpm@linux-foundation.org: fix Kconfig text, make sram_init static] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Michal Simek <monstr@monstr.eu> Cc: Dong Aisheng <dong.aisheng@linaro.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Shijie <shijie8@gmail.com> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Matt Porter <mporter@ti.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29lis3lv02d: don't wank with fasync() on ->release()Al Viro1-1/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-23misc: mark spear13xx-pcie-gadget as brokenArnd Bergmann1-1/+1
This driver was merged in 2.6.38 but never actually compiled because it depends on the <mach/pcie.h> header that has not made it into the kernel. Starting with Linux-3.10, this results in "allyesconfig" build errors, since spear13xx can now be enabled with the default "multiplatform" platform on ARM. Let's mark it as broken for now. If it doesn't get fixed, we can drop it completely. Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23mei: fix krealloc() misuse in in mei_cl_irq_read_msg()Wei Yongjun1-5/+5
If krealloc() returns NULL, it doesn't free the original. So any code of the form 'foo = krealloc(foo, ...);' is almost certainly a bug. Introduced by commit fcb136e1ac5774909e0d85189f721b8dfa800e0f(mei: fix reading large reposnes) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23mei: reduce flow control only for completed messagesTomas Winkler1-3/+4
This fixes bug when only first chunk of a large message split by hbuf_max_len is written to the hardware. All the consequent chunks will not get a new credit. A regression introduced by the commit 0ef319c93cebff9f82bdd0cdbb298f2dd00acda8 mei: streamline write complete flow function Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19mei: reseting -> resettingBill Nottingham4-8/+8
This enum leaks out to userspace via error messages, so fix the spelling. Signed-off-by: Bill Nottingham <notting@redhat.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19mei: fix reading large reposnesTomas Winkler5-15/+27
While writting to device is limitted to max_msg_length advertized in client properites the read can be much longer delivered consequiting chunks. We use krealloc to enlarge the buffer when needed. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19mei: revamp mei_irq_read_client_message functionTomas Winkler1-58/+66
1. Rename the function and change parameters order, so that first parameter is mei_device 2. Simplify the function code flow 3. Rename helper functions to more self descriptive names 4. Use helpers common functions where possible Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19mei: revamp mei_amthif_irq_read_messageTomas Winkler3-6/+15
Rename the function to mei_amthif_irq_read_msg and change parameters order Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19mei: revamp hbm state machineTomas Winkler7-59/+72
1. Rename init_clients_state to hbm_state and use MEI_HBM_ prefix for HBM states 2. Remove recvd_msg and use hbm state for synchronizing hbm protocol has successful start. We can wake up the hbm event from start response handler and remove the hack from the interrupt thread 3. mei_hbm_start_wait function encapsulate start completion waiting Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15mei: wd: fix line over 80 charactersTomas Winkler1-1/+2
Fix checkpatch warning: WARNING: line over 80 characters Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11misc: tsl2550: Use dev_pm_opsLars-Peter Clausen1-10/+11
Use dev_pm_ops instead of the deprecated legacy suspend/resume callbacks. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11misc: isl29003: Use dev_pm_opsLars-Peter Clausen1-8/+11
Use dev_pm_ops instead of the deprecated legacy suspend/resume callbacks. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11misc: fsa8480: Use dev_pm_opsLars-Peter Clausen1-8/+11
Use dev_pm_ops instead of the deprecated legacy suspend/resume callbacks. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 21:29:42 +0000