summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2014-07-06IB/umad: Fix use-after-free on closeBart Van Assche1-11/+19
commit 60e1751cb52cc6d1ae04b6bd3c2b96e770b5823f upstream. Avoid that closing /dev/infiniband/umad<n> or /dev/infiniband/issm<n> triggers a use-after-free. __fput() invokes f_op->release() before it invokes cdev_put(). Make sure that the ib_umad_device structure is freed by the cdev_put() call instead of f_op->release(). This avoids that changing the port mode from IB into Ethernet and back to IB followed by restarting opensmd triggers the following kernel oops: general protection fault: 0000 [#1] PREEMPT SMP RIP: 0010:[<ffffffff810cc65c>] [<ffffffff810cc65c>] module_put+0x2c/0x170 Call Trace: [<ffffffff81190f20>] cdev_put+0x20/0x30 [<ffffffff8118e2ce>] __fput+0x1ae/0x1f0 [<ffffffff8118e35e>] ____fput+0xe/0x10 [<ffffffff810723bc>] task_work_run+0xac/0xe0 [<ffffffff81002a9f>] do_notify_resume+0x9f/0xc0 [<ffffffff814b8398>] int_signal+0x12/0x17 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=75051 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06IB/umad: Fix error handlingBart Van Assche1-22/+27
commit 8ec0a0e6b58218bdc1db91dd70ebfcd6ad8dd6cd upstream. Avoid leaking a kref count in ib_umad_open() if port->ib_dev == NULL or if nonseekable_open() fails. Avoid leaking a kref count, that sm_sem is kept down and also that the IB_PORT_SM capability mask is not cleared in ib_umad_sm_open() if nonseekable_open() fails. Since container_of() never returns NULL, remove the code that tests whether container_of() returns NULL. Moving the kref_get() call from the start of ib_umad_*open() to the end is safe since it is the responsibility of the caller of these functions to ensure that the cdev pointer remains valid until at least when these functions return. Signed-off-by: Bart Van Assche <bvanassche@acm.org> [ydroneaud@opteya.com: rework a bit to reduce the amount of code changed] Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> [ nonseekable_open() can't actually fail, but.... - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06IB/srp: Fix a sporadic crash triggered by cable pullingBart Van Assche1-0/+6
commit 024ca90151f5e4296d30f72c13ff9a075e23c9ec upstream. Avoid that the loops that iterate over the request ring can encounter a pointer to a SCSI command in req->scmnd that is no longer associated with that request. If the function srp_unmap_data() is invoked twice for a SCSI command that is not in flight then that would cause ib_fmr_pool_unmap() to be invoked with an invalid pointer as argument, resulting in a kernel oops. Reported-by: Sagi Grimberg <sagig@mellanox.com> Reference: http://thread.gmane.org/gmane.linux.drivers.rdma/19068/focus=19069 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06IB/ipath: Translate legacy diagpkt into newer extended diagpktDennis Dalessandro1-0/+4
commit 7e6d3e5c70f13874fb06e6b67696ed90ce79bd48 upstream. This patch addresses an issue where the legacy diagpacket is sent in from the user, but the driver operates on only the extended diagpkt. This patch specifically initializes the extended diagpkt based on the legacy packet. Reported-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06IB/qib: Fix port in pkey change eventMike Marciniszyn1-1/+1
commit 911eccd284d13d78c92ec4f1f1092c03457d732a upstream. The code used a literal 1 in dispatching an IB_EVENT_PKEY_CHANGE. As of the dual port qib QDR card, this is not necessarily correct. Change to use the port as specified in the call. Reported-by: Alex Estrin <alex.estrin@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30Target/iser: Wait for proper cleanup before unloadingSagi Grimberg1-0/+1
commit f5ebec9629cf78eeeea4b8258882a9f439ab2404 upstream. disconnected_handler works are scheduled on system_wq. When attempting to unload, first make sure all works have cleaned up. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30Target/iser: Improve cm events handlingSagi Grimberg2-12/+15
commit 88c4015fda6d014392f76d3b1688347950d7a12d upstream. There are 4 RDMA_CM events that all basically mean that the user should teardown the IB connection: - DISCONNECTED - ADDR_CHANGE - DEVICE_REMOVAL - TIMEWAIT_EXIT Only in DISCONNECTED/ADDR_CHANGE it makes sense to call rdma_disconnect (send DREQ/DREP to our initiator). So we keep the same teardown handler for all of them but only indicate calling rdma_disconnect for the relevant events. This patch also removes redundant debug prints for each single event. v2 changes: - Call isert_disconnected_handler() for DEVICE_REMOVAL (Or + Sag) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30Target/iser: Fix hangs in connection teardownSagi Grimberg2-22/+10
commit 9d49f5e284e700576f3b65f1e28dea8539da6661 upstream. In ungraceful teardowns isert close flows seem racy such that isert_wait_conn hangs as RDMA_CM_EVENT_DISCONNECTED never gets invoked (no one called rdma_disconnect). Both graceful and ungraceful teardowns will have rx flush errors (isert posts a batch once connection is established). Once all flush errors are consumed we invoke isert_wait_conn and it will be responsible for calling rdma_disconnect. This way it can be sure that rdma_disconnect was called and it won't wait forever. This patch also removes the logout_posted indicator. either the logout completion was consumed and no problem decrementing the post_send_buf_count, or it was consumed as a flush error. no point of keeping it for isert_wait_conn as there is no danger that isert_conn will be accidentally removed while it is running. (Drop unnecessary sleep_on_conn_wait_comp check in isert_cq_rx_comp_err - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30Target/iser: Bail from accept_np if np_thread is trying to closeSagi Grimberg1-2/+7
commit e346ab343f4f58c12a96725c7b13df9cc2ad56f6 upstream. In case np_thread state is in RESET/SHUTDOWN/EXIT states, no point for isert to stall there as we may get a hang in case no one will wake it up later. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-16Target/iscsi,iser: Avoid accepting transport connections during stop stageSagi Grimberg1-0/+8
commit 14f4b54fe38f3a8f8392a50b951c8aa43b63687a upstream. When the target is in stop stage, iSER transport initiates RDMA disconnects. The iSER initiator may wish to establish a new connection over the still existing network portal. In this case iSER transport should not accept and resume new RDMA connections. In order to learn that, iscsi_np is added with enabled flag so the iSER transport can check when deciding weather to accept and resume a new connection request. The iscsi_np is enabled after successful transport setup, and disabled before iscsi_np login threads are cleaned up. (Fix up context changes for v3.10.y - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-11iser-target: Add missing target_put_sess_cmd for ImmedateData failureNicholas Bellinger1-0/+2
commit 6cc44a6fb46e1ecc1c28125aa8fa34d317aa9ea7 upstream. This patch addresses a bug where an early exception for SCSI WRITE with ImmediateData=Yes was missing the target_put_sess_cmd() call to drop the extra se_cmd->cmd_kref reference obtained during the normal iscsit_setup_scsi_cmd() codepath execution. This bug was manifesting itself during session shutdown within isert_cq_rx_comp_err() where target_wait_for_sess_cmds() would end up waiting indefinately for the last se_cmd->cmd_kref put to occur for the failed SCSI WRITE + ImmediateData descriptors. This fix follows what traditional iscsi-target code already does for the same failure case within iscsit_get_immediate_data(). Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Target/iser: Fix iscsit_accept_np and rdma_cm racy flowSagi Grimberg2-20/+7
commit 531b7bf4bd795d9a09eac92504322a472c010bc8 upstream. RDMA CM and iSCSI target flows are asynchronous and completely uncorrelated. Relying on the fact that iscsi_accept_np will be called after CM connection request event and will wait for it is a mistake. When attempting to login to a few targets this flow is racy and unpredictable, but for parallel login to dozens of targets will race and hang every time. The correct synchronizing mechanism in this case is pending on a semaphore rather than a wait_for_event. We keep the pending interruptible for iscsi_np cleanup stage. (Squash patch to remove dead code into parent - nab) Reported-by: Slava Shwartsman <valyushash@gmail.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Target/iser: Fix wrong connection requests list additionSagi Grimberg1-1/+1
commit 9fe63c88b1d59f1ce054d6948ccd3096496ecedb upstream. Should be adding list_add_tail($new, $head) and not the other way around. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-13iser-target: Add missing se_cmd put for WRITE_PENDING in tx_comp_errNicholas Bellinger1-8/+21
commit 03e7848a64ed535a30f5d7fc6dede2d5a6a2534b upstream. This patch fixes a bug where outstanding RDMA_READs with WRITE_PENDING status require an extra target_put_sess_cmd() in isert_put_cmd() code when called from isert_cq_tx_comp_err() + isert_cq_drain_comp_llist() context during session shutdown. The extra kref PUT is required so that transport_generic_free_cmd() invokes the last target_put_sess_cmd() -> target_release_cmd_kref(), which will complete(&se_cmd->cmd_wait_comp) the outstanding se_cmd descriptor with WRITE_PENDING status, and awake the completion in target_wait_for_sess_cmds() to invoke TFO->release_cmd(). The bug was manifesting itself in target_wait_for_sess_cmds() where a se_cmd descriptor with WRITE_PENDING status would end up sleeping indefinately. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ib_srpt: Use correct ib_sg_dma primitivesMike Marciniszyn1-6/+10
commit b076808051f2c80d38e03fb2f1294f525c7a446d upstream. The code was incorrectly using sg_dma_address() and sg_dma_len() instead of ib_sg_dma_address() and ib_sg_dma_len(). This prevents srpt from functioning with the Intel HCA and indeed will corrupt memory badly. Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Vinod Kumar <vinod.kumar@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06IB/ehca: Returns an error on ib_copy_to_udata() failureYann Droneaud1-0/+1
commit 5bdb0f02add5994b0bc17494f4726925ca5d6ba1 upstream. In case of error when writing to userspace, function ehca_create_cq() does not set an error code before following its error path. This patch sets the error code to -EFAULT when ib_copy_to_udata() fails. This was caught when using spatch (aka. coccinelle) to rewrite call to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06IB/mthca: Return an error on ib_copy_to_udata() failureYann Droneaud1-0/+1
commit 08e74c4b00c30c232d535ff368554959403d0432 upstream. In case of error when writing to userspace, the function mthca_create_cq() does not set an error code before following its error path. This patch sets the error code to -EFAULT when ib_copy_to_udata() fails. This was caught when using spatch (aka. coccinelle) to rewrite call to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06IB/nes: Return an error on ib_copy_from_udata() failure instead of NULLYann Droneaud1-1/+1
commit 9d194d1025f463392feafa26ff8c2d8247f71be1 upstream. In case of error while accessing to userspace memory, function nes_create_qp() returns NULL instead of an error code wrapped through ERR_PTR(). But NULL is not expected by ib_uverbs_create_qp(), as it check for error with IS_ERR(). As page 0 is likely not mapped, it is going to trigger an Oops when the kernel will try to dereference NULL pointer to access to struct ib_qp's fields. In some rare cases, page 0 could be mapped by userspace, which could turn this bug to a vulnerability that could be exploited: the function pointers in struct ib_device will be under userspace total control. This was caught when using spatch (aka. coccinelle) to rewrite calls to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/ib-hw-nes-create-qp-null Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06IB/ipath: Fix potential buffer overrun in sending diag packet routineDennis Dalessandro1-41/+25
commit a2cb0eb8a64adb29a99fd864013de957028f36ae upstream. Guard against a potential buffer overrun. The size to read from the user is passed in, and due to the padding that needs to be taken into account, as well as the place holder for the ICRC it is possible to overflow the 32bit value which would cause more data to be copied from user space than is allocated in the buffer. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23iser-target: Fix post_send_buf_count for RDMA READ/WRITENicholas Bellinger1-6/+8
commit b6b87a1df604678ed1be40158080db012a99ccca upstream. This patch fixes the incorrect setting of ->post_send_buf_count related to RDMA WRITEs + READs where isert_rdma_rw->send_wr_num was not being taken into account. This includes incrementing ->post_send_buf_count within isert_put_datain() + isert_get_dataout(), decrementing within __isert_send_completion() + isert_response_completion(), and clearing wr->send_wr_num within isert_completion_rdma_read() This is necessary because even though IB_SEND_SIGNALED is not set for RDMA WRITEs + READs, during a QP failure event the work requests will be returned with exception status from the TX completion queue. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23iscsi/iser-target: Fix isert_conn->state hung shutdown issuesNicholas Bellinger2-60/+48
commit defd884845297fd5690594bfe89656b01f16d87e upstream. This patch addresses a couple of different hug shutdown issues related to wait_event() + isert_conn->state. First, it changes isert_conn->conn_wait + isert_conn->conn_wait_comp_err from waitqueues to completions, and sets ISER_CONN_TERMINATING from within isert_disconnect_work(). Second, it splits isert_free_conn() into isert_wait_conn() that is called earlier in iscsit_close_connection() to ensure that all outstanding commands have completed before continuing. Finally, it breaks isert_cq_comp_err() into seperate TX / RX related code, and adds logic in isert_cq_rx_comp_err() to wait for outstanding commands to complete before setting ISER_CONN_DOWN and calling complete(&isert_conn->conn_wait_comp_err). Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23iscsi/iser-target: Use list_del_init for ->i_conn_nodeNicholas Bellinger1-3/+3
commit 5159d763f60af693a3fcec45dce2021f66e528a4 upstream. There are a handful of uses of list_empty() for cmd->i_conn_node within iser-target code that expect to return false once a cmd has been removed from the per connect list. This patch changes all uses of list_del -> list_del_init in order to ensure that list_empty() returns false as expected. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22IB/qib: Add missing serdes init sequenceMike Marciniszyn1-0/+5
commit 2f75e12c4457a9b3d042c0a0d748fa198dc2ffaf upstream. Research has shown that commit a77fcf895046 ("IB/qib: Use a single txselect module parameter for serdes tuning") missed a key serdes init sequence. This patch add that sequence. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-20IB/qib: Convert qib_user_sdma_pin_pages() to use get_user_pages_fast()Jan Kara1-5/+1
commit 603e7729920e42b3c2f4dbfab9eef4878cb6e8fa upstream. qib_user_sdma_queue_pkts() gets called with mmap_sem held for writing. Except for get_user_pages() deep down in qib_user_sdma_pin_pages() we don't seem to need mmap_sem at all. Even more interestingly the function qib_user_sdma_queue_pkts() (and also qib_user_sdma_coalesce() called somewhat later) call copy_from_user() which can hit a page fault and we deadlock on trying to get mmap_sem when handling that fault. So just make qib_user_sdma_pin_pages() use get_user_pages_fast() and leave mmap_sem locking for mm. This deadlock has actually been observed in the wild when the node is under memory pressure. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Roland Dreier <roland@purestorage.com> [Backported to 3.10: (Thanks to Ben Huthings) - Adjust context - Adjust indentation and nr_pages argument in qib_user_sdma_pin_pages()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13IB/qib: Fix QP check when looping back to/from QP1Ira Weiny1-1/+8
commit 6e0ea9e6cbcead7fa8c76e3e3b9de4a50c5131c5 upstream. The GSI QP type is compatible with and should be allowed to send data to/from any UD QP. This was found when testing ibacm on the same node as an SA. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09iser-target: fix error return code in isert_create_device_ib_res()Wei Yongjun1-4/+12
commit 94a7111043d99819cd0a72d9b3174c7054adb2a0 upstream. Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04IB/srp: Report receive errors correctlyBart Van Assche1-5/+4
commit cd4e38542a5c2cab94e5410fb17c1cc004a60792 upstream. The IB spec does not guarantee that the opcode is available in error completions. Hence do not rely on it. See also commit 948d1e889e5b ("IB/srp: Introduce srp_handle_qp_err()"). Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04IB/qib: Fix txselect regressionMike Marciniszyn1-6/+5
commit 2fadd83184d58701f1116ca578465b5a75f9417c upstream. Commit 7fac33014f54("IB/qib: checkpatch fixes") was overzealous in removing a simple_strtoul for a parse routine, setup_txselect(). That routine is required to handle a multi-value string. Unwind that aspect of the fix. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04IB/ipath: Convert ipath_user_sdma_pin_pages() to use get_user_pages_fast()Jan Kara1-6/+1
commit 4adcf7fb6783e354aab38824d803fa8c4f8e8a27 upstream. ipath_user_sdma_queue_pkts() gets called with mmap_sem held for writing. Except for get_user_pages() deep down in ipath_user_sdma_pin_pages() we don't seem to need mmap_sem at all. Even more interestingly the function ipath_user_sdma_queue_pkts() (and also ipath_user_sdma_coalesce() called somewhat later) call copy_from_user() which can hit a page fault and we deadlock on trying to get mmap_sem when handling that fault. So just make ipath_user_sdma_pin_pages() use get_user_pages_fast() and leave mmap_sem locking for mm. This deadlock has actually been observed in the wild when the node is under memory pressure. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> [ Merged in fix for call to get_user_pages_fast from Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13ib_srpt: always set response for task managementJack Wang1-6/+4
commit c807f64340932e19f0d2ac9b30c8381e1f60663a upstream. The SRP specification requires: "Response data shall be provided in any SRP_RSP response that is sent in response to an SRP_TSK_MGMT request (see 6.7). The information in the RSP_CODE field (see table 24) shall indicate the completion status of the task management function." So fix this to avoid the SRP initiator interprets task management functions that succeeded as failed. Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13ib_srpt: Destroy cm_id before destroying QP.Nicholas Bellinger1-2/+2
commit 0b41d6ca616ddeb3b6c0a80e8770b6f53cd42806 upstream. This patch fixes a bug where ib_destroy_cm_id() was incorrectly being called after srpt_destroy_ch_ib() had destroyed the active QP. This would result in the following failed SRP_LOGIN_REQ messages: Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1762bd, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c903009f8f41) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1758f9, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c903009f8f42) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff175941, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c90300a3cfb2) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9 rejected SRP_LOGIN_REQ because creating a new RDMA channel failed. Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9 rejected SRP_LOGIN_REQ because creating a new RDMA channel failed. Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) Reported-by: Navin Ahuja <navin.ahuja@saratoga-speed.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04iscsi-target: Fix iscsit_sequence_cmd reject handling for iserNicholas Bellinger1-1/+1
commit 561bf15892375597ee59d473a704a3e634c4f311 upstream This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd() in order to avoid external iscsit_reject_cmd() reject usage for all PDU types. It also updates PDU specific handlers for traditional iscsi-target code to not reset the session after posting a ISCSI_OP_REJECT during setup. (v2: Fix CMDSN_LOWER_THAN_EXP for ISCSI_OP_SCSI to call target_put_sess_cmd() after iscsit_sequence_cmd() failure) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04iscsi-target: Fix iscsit_add_reject* usage for iserNicholas Bellinger1-5/+0
commit ba159914086f06532079fc15141f46ffe7e04a41 upstream This patch changes iscsit_add_reject() + iscsit_add_reject_from_cmd() usage to not sleep on iscsi_cmd->reject_comp to address a free-after-use usage bug in v3.10 with iser-target code. It saves ->reject_reason for use within iscsit_build_reject() so the correct value for both transport cases. It also drops the legacy fail_conn parameter usage throughput iscsi-target code and adds two iscsit_add_reject_cmd() and iscsit_reject_cmd helper functions, along with various small cleanups. (v2: Re-enable target_put_sess_cmd() to be called from iscsit_add_reject_from_cmd() for rejects invoked after target_get_sess_cmd() has been called) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04iscsi-target: Fix ISCSI_OP_SCSI_TMFUNC handling for iserNicholas Bellinger1-8/+8
commit 186a9647019587b3784694894c4d136fd00cfd7b upstream. This patch adds target_get_sess_cmd reference counting for iscsit_handle_task_mgt_cmd(), and adds a target_put_sess_cmd() for the failure case. It also fixes a bug where ISCSI_OP_SCSI_TMFUNC type commands where leaking iscsi_cmd->i_conn_node and eventually triggering an OOPs during struct isert_conn shutdown. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTEDNicholas Bellinger2-10/+61
commit b2cb96494d83b894a43ba8b9023eead8ff50684b upstream. This patch addresses a bug where RDMA_CM_EVENT_DISCONNECTED may occur before the connection shutdown has been completed by rx/tx threads, that causes isert_free_conn() to wait indefinately on ->conn_wait. This patch allows isert_disconnect_work code to invoke rdma_disconnect when isert_disconnect_work() process context is started by client session reset before isert_free_conn() code has been reached. It also adds isert_conn->conn_mutex protection for ->state within isert_disconnect_work(), isert_cq_comp_err() and isert_free_conn() code, along with isert_check_state() for wait_event usage. (v2: Add explicit iscsit_cause_connection_reinstatement call during isert_disconnect_work() to force conn reset) Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04iser-target: Fix isert_put_reject payload buffer postNicholas Bellinger1-4/+22
commit 3df8f68aaf7ebe3d136a22262b41b350b0a1858b upstream. This patch adds the missing isert_put_reject() logic to post a outgoing payload buffer to hold the 48 bytes of original PDU header request payload for the rejected cmd. It also fixes ISTATE_SEND_REJECT handling in isert_response_completion() -> isert_do_control_comp() code, and drops incorrect iscsi_cmd_t->reject_comp usage. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04Merge branches 'iser' and 'qib' into for-nextRoland Dreier1-1/+1
2013-06-04IB/qib: Fix lockdep splat in qib_alloc_lkey()Mike Marciniszyn1-1/+1
The following backtrace is reported with CONFIG_PROVE_RCU: drivers/infiniband/hw/qib/qib_keys.c:64 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 4 locks held by kworker/0:1/56: #0: (events){.+.+.+}, at: [<ffffffff8107a4f5>] process_one_work+0x165/0x4a0 #1: ((&wfc.work)){+.+.+.}, at: [<ffffffff8107a4f5>] process_one_work+0x165/0x4a0 #2: (device_mutex){+.+.+.}, at: [<ffffffffa0148dd8>] ib_register_device+0x38/0x220 [ib_core] #3: (&(&dev->lk_table.lock)->rlock){......}, at: [<ffffffffa017e81c>] qib_alloc_lkey+0x3c/0x1b0 [ib_qib] stack backtrace: Pid: 56, comm: kworker/0:1 Not tainted 3.10.0-rc1+ #6 Call Trace: [<ffffffff810c0b85>] lockdep_rcu_suspicious+0xe5/0x130 [<ffffffffa017e8e1>] qib_alloc_lkey+0x101/0x1b0 [ib_qib] [<ffffffffa0184886>] qib_get_dma_mr+0xa6/0xd0 [ib_qib] [<ffffffffa01461aa>] ib_get_dma_mr+0x1a/0x50 [ib_core] [<ffffffffa01678dc>] ib_mad_port_open+0x12c/0x390 [ib_mad] [<ffffffff810c2c55>] ? trace_hardirqs_on_caller+0x105/0x190 [<ffffffffa0167b92>] ib_mad_init_device+0x52/0x110 [ib_mad] [<ffffffffa01917c0>] ? sl2vl_attr_show+0x30/0x30 [ib_qib] [<ffffffffa0148f49>] ib_register_device+0x1a9/0x220 [ib_core] [<ffffffffa01b1685>] qib_register_ib_device+0x735/0xa40 [ib_qib] [<ffffffff8106ba98>] ? mod_timer+0x118/0x220 [<ffffffffa017d425>] qib_init_one+0x1e5/0x400 [ib_qib] [<ffffffff812ce86e>] local_pci_probe+0x4e/0x90 [<ffffffff81078118>] work_for_cpu_fn+0x18/0x30 [<ffffffff8107a566>] process_one_work+0x1d6/0x4a0 [<ffffffff8107a4f5>] ? process_one_work+0x165/0x4a0 [<ffffffff8107c9c9>] worker_thread+0x119/0x370 [<ffffffff8107c8b0>] ? manage_workers+0x180/0x180 [<ffffffff8108294e>] kthread+0xee/0x100 [<ffffffff81082860>] ? __init_kthread_worker+0x70/0x70 [<ffffffff815c04ac>] ret_from_fork+0x7c/0xb0 [<ffffffff81082860>] ? __init_kthread_worker+0x70/0x70 Per Documentation/RCU/lockdep-splat.txt, the code now uses rcu_access_pointer() vs. rcu_dereference(). Reported-by: Jay Fenlason <fenlason@redhat.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-04IB/iser: Add Mellanox copyrightOr Gerlitz5-0/+5
Add Mellanox copyright to the iser initiator source code which I maintain. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-04IB/iser: Fix device removal flowRoi Dayan1-7/+8
Change the code to destroy the "last opened" rdma_cm id after making sure we released all other objects (QP, CQs, PD, etc) associated with the IB device. Since iser accesses the IB device using the rdma_cm id, we need to free any objects that are related to the device that is associated with the rdma_cm id prior to destroying that id. When this isn't done, the low level driver that created this device can be unloaded before iser has a chance to free all the objects and a such a call may invoke code segment which isn't valid any more and crash. Cc: Sean Hefty <sean.hefty@intel.com Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-05-29ib_srpt: Call target_sess_cmd_list_set_waiting during shutdown_sessionNicholas Bellinger2-8/+25
Given that srpt_release_channel_work() calls target_wait_for_sess_cmds() to allow outstanding se_cmd_t->cmd_kref a change to complete, the call to perform target_sess_cmd_list_set_waiting() needs to happen in srpt_shutdown_session() Also, this patch adds an explicit call to srpt_shutdown_session() within srpt_drain_channel() so that target_sess_cmd_list_set_waiting() will be called in the cases where TFO->shutdown_session() is not triggered directly by TCM. Cc: Joern Engel <joern@logfs.org> Cc: Roland Dreier <roland@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-20target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmdsJoern Engel1-1/+1
Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers. Cc: Joern Engel <joern@logfs.org> Cc: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-08Merge tag 'rdma-for-linus' of ↵Linus Torvalds15-55/+120
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA changes from Roland Dreier: - XRC transport fixes - Fix DHCP on IPoIB - mlx4 preparations for flow steering - iSER fixes - miscellaneous other fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (23 commits) IB/iser: Add support for iser CM REQ additional info IB/iser: Return error to upper layers on EAGAIN registration failures IB/iser: Move informational messages from error to info level IB/iser: Add module version mlx4_core: Expose a few helpers to fill DMFS HW strucutures mlx4_core: Directly expose fields of DMFS HW rule control segment mlx4_core: Change a few DMFS fields names to match firmare spec mlx4: Match DMFS promiscuous field names to firmware spec mlx4_core: Move DMFS HW structs to common header file IB/mlx4: Set link type for RAW PACKET QPs in the QP context IB/mlx4: Disable VLAN stripping for RAW PACKET QPs mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level RDMA/iwcm: Don't touch cmid after dropping reference IB/qib: Correct qib_verbs_register_sysfs() error handling IB/ipath: Correct ipath_verbs_register_sysfs() error handling RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled SRPT: Fix odd use of WARN_ON() IPoIB: Fix ipoib_hard_header() return value RDMA: Rename random32() to prandom_u32() RDMA/cxgb3: Fix uninitialized variable ...
2013-05-08Merge branches 'cxgb4', 'ipoib', 'iser', 'misc', 'mlx4', 'qib' and 'srp' ↵Roland Dreier18-52/+113
into for-next
2013-05-07aio: don't include aio.h in sched.hKent Overstreet2-1/+2
Faster kernel compiles by way of fewer unnecessary includes. [akpm@linux-foundation.org: fix fallout] [akpm@linux-foundation.org: fix build] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07drivers/infiniband/hw: rename random32() to prandom_u32()Andrew Morton4-6/+6
Use preferable function name which implies using a pseudo-random number generator. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01IB/iser: Add support for iser CM REQ additional infoOr Gerlitz2-0/+16
Annex A12 of the IBTA spec defines additional information that needs to be provided through the CM exchange relating to usage of ZBVA (Zero Based VAs) and Send With Invalidate over an iSER connection. Currently, the initiator sets both to not supported, but does provide the header so that existing iSER targets can be patched to start looking on the private data carried by the CM. This is a preparation step to enable iSER with HW drivers for which FMRs are not supported, such as mlx4 VF instances or new HW devices which might support only FRWR (Fast Registration Work-Requests) along the details of the IB_DEVICE_MEM_MGT_EXTENSIONS device capability. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-05-01IB/iser: Return error to upper layers on EAGAIN registration failuresOr Gerlitz1-1/+2
Commit 819a087316a6 ("IB/iser: Avoid error prints on EAGAIN registration failures") not only eliminated the error print on that case, but rather also modified the code such that it doesn't return any error to upper layers. As a result a wrong mapping was used. Fix this to correctly return the error in that case. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-05-01IB/iser: Move informational messages from error to info levelRoi Dayan3-25/+34
Introduce iser_info() and move informational messages that were printed as errors to use that macro. Also, cleanup printk leftovers to use the existing macros. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [ Use pr_warn(... instead of printk(KERN_WARNING .... - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-05-01IB/iser: Add module versionRoi Dayan2-5/+4
Add displaying module version, update the version to 1.1, and remove the DRV_DATE define. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 13:45:14 +0000