summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2010-02-11Merge branch 'for-linus' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cm: Revert association of an RDMA device when binding to loopback
2010-02-10RDMA/cm: Revert association of an RDMA device when binding to loopbackSean Hefty1-3/+1
Revert the following change from commit 6f8372b6 ("RDMA/cm: fix loopback address support") The defined behavior of rdma_bind_addr is to associate an RDMA device with an rdma_cm_id, as long as the user specified a non- zero address. (ie they weren't just trying to reserve a port) Currently, if the loopback address is passed to rdma_bind_addr, no device is associated with the rdma_cm_id. Fix this. It turns out that important apps such as Open MPI depend on rdma_bind_addr() NOT associating any RDMA device when binding to a loopback address. Open MPI is being updated to deal with this, but at least until a new Open MPI release is available, maintain the previous behavior: allow rdma_bind_addr() to succeed, but do not bind to a device. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-01-26Fix failure exit in ipathfsAl Viro1-3/+1
deactivate_locked_super() will be done by caller of fill_super, doing it there as well is b0rken. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-06Merge branches 'misc' and 'mlx4' into for-nextRoland Dreier2-1/+7
2010-01-06IB/addr: Correct CONFIG_IPv6 to CONFIG_IPV6Robert P. J. Day1-1/+1
Correct misspelled "CONFIG_IPv6" that was introduced in commit d14714df ("IB/addr: Fix IPv6 routing lookup"). The config variable should be all uppercase. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> [ This was my fault when I munged the original patch. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-01-06IB/mlx4: Fix queue overflow check in post_recvOr Gerlitz1-1/+1
In mlx4_ib_post_recv(), we should check the queue for overflow using recv_cq instead of send_cq (current code looks like a copy-and-paste mistake). Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-01-06IB/mlx4: Initialize SRQ scatter entries when creating an SRQJack Morgenstein1-0/+6
As for memfree mthca hardware, ConnectX also requires SRQ WQE scatter entries to be initialized with the invalid L_Key at SRQ creation time. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-22kfifo: fix warn_unused_resultStefani Seibold1-2/+3
Fix the "ignoring return value of '...', declared with attribute warn_unused_result" compiler warning in several users of the new kfifo API. It removes the __must_check attribute from kfifo_in() and kfifo_in_locked() which must not necessary performed. Fix the allocation bug in the nozomi driver file, by moving out the kfifo_alloc from the interrupt handler into the probe function. Fix the kfifo_out() and kfifo_out_locked() users to handle a unexpected end of fifo. Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: rename kfifo_put... into kfifo_in... and kfifo_get... into kfifo_out...Stefani Seibold1-8/+8
rename kfifo_put... into kfifo_in... to prevent miss use of old non in kernel-tree drivers ditto for kfifo_get... -> kfifo_out... Improve the prototypes of kfifo_in and kfifo_out to make the kerneldoc annotations more readable. Add mini "howto porting to the new API" in kfifo.h Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: cleanup namespaceStefani Seibold1-5/+5
change name of __kfifo_* functions to kfifo_*, because the prefix __kfifo should be reserved for internal functions only. Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: move out spinlockStefani Seibold1-16/+20
Move the pointer to the spinlock out of struct kfifo. Most users in tree do not actually use a spinlock, so the few exceptions now have to call kfifo_{get,put}_locked, which takes an extra argument to a spinlock. Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: move struct kfifo in placeStefani Seibold2-35/+34
This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16Merge branch 'master' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (38 commits) direct I/O fallback sync simplification ocfs: stop using do_sync_mapping_range cleanup blockdev_direct_IO locking make generic_acl slightly more generic sanitize xattr handler prototypes libfs: move EXPORT_SYMBOL for d_alloc_name vfs: force reval of target when following LAST_BIND symlinks (try #7) ima: limit imbalance msg Untangling ima mess, part 3: kill dead code in ima Untangling ima mess, part 2: deal with counters Untangling ima mess, part 1: alloc_file() O_TRUNC open shouldn't fail after file truncation ima: call ima_inode_free ima_inode_free IMA: clean up the IMA counts updating code ima: only insert at inode creation time ima: valid return code from ima_inode_alloc fs: move get_empty_filp() deffinition to internal.h Sanitize exec_permission_lite() Kill cached_lookup() and real_lookup() Kill path_lookup_open() ... Trivial conflicts in fs/direct-io.c
2009-12-16Merge branch 'for-linus' of ↵Linus Torvalds29-872/+1028
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (45 commits) RDMA/cxgb3: Fix error paths in post_send and post_recv RDMA/nes: Fix stale ARP issue RDMA/nes: FIN during MPA startup causes timeout RDMA/nes: Free kmap() resources RDMA/nes: Check for zero STag RDMA/nes: Fix Xansation test crash on cm_node ref_count RDMA/nes: Abnormal listener exit causes loopback node crash RDMA/nes: Fix crash in nes_accept() RDMA/nes: Resource not freed for REJECTed connections RDMA/nes: MPA request/response error checking RDMA/nes: Fix query of ORD values RDMA/nes: Fix MAX_CM_BUFFER define RDMA/nes: Pass correct size to ioremap_nocache() RDMA/nes: Update copyright and branding string RDMA/nes: Add max_cqe check to nes_create_cq() RDMA/nes: Clean up struct nes_qp RDMA/nes: Implement IB_SIGNAL_ALL_WR as an iWARP extension RDMA/nes: Add additional SFP+ PHY uC status check and PHY reset RDMA/nes: Correct fast memory registration implementation IB/ehca: Fix error paths in post_send and post_recv ...
2009-12-16switch alloc_file() to passing struct pathAl Viro1-2/+7
... and have the caller grab both mnt and dentry; kill leak in infiniband, while we are at it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-15Merge branches 'amso1100', 'cma', 'cxgb3', 'ehca', 'ipath', 'ipoib', 'iser', ↵Roland Dreier28-868/+1018
'misc', 'mlx4' and 'nes' into for-next
2009-12-15RDMA/cxgb3: Fix error paths in post_send and post_recvFrank Zago1-12/+20
Always set bad_wr when an immediate error is detected. Return ENOMEM for queue full instead of EINVAL to match other drivers. Signed-off-by: Frank Zago <fzago@systemfabricworks.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-14Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits) m68k: rename global variable vmalloc_end to m68k_vmalloc_end percpu: add missing per_cpu_ptr_to_phys() definition for UP percpu: Fix kdump failure if booted with percpu_alloc=page percpu: make misc percpu symbols unique percpu: make percpu symbols in ia64 unique percpu: make percpu symbols in powerpc unique percpu: make percpu symbols in x86 unique percpu: make percpu symbols in xen unique percpu: make percpu symbols in cpufreq unique percpu: make percpu symbols in oprofile unique percpu: make percpu symbols in tracer unique percpu: make percpu symbols under kernel/ and mm/ unique percpu: remove some sparse warnings percpu: make alloc_percpu() handle array types vmalloc: fix use of non-existent percpu variable in put_cpu_var() this_cpu: Use this_cpu_xx in trace_functions_graph.c this_cpu: Use this_cpu_xx for ftrace this_cpu: Use this_cpu_xx in nmi handling this_cpu: Use this_cpu operations in RCU this_cpu: Use this_cpu ops for VM statistics ... Fix up trivial (famous last words) global per-cpu naming conflicts in arch/x86/kvm/svm.c mm/slab.c
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds5-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-0/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (222 commits) [SCSI] zfcp: Remove flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP [SCSI] zfcp: Activate fc4s attributes for zfcp in FC transport class [SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED [SCSI] zfcp: Update FSF error reporting [SCSI] zfcp: Improve ELS ADISC handling [SCSI] zfcp: Simplify handling of ct and els requests [SCSI] zfcp: Remove ZFCP_DID_MASK [SCSI] zfcp: Move WKA port to zfcp FC code [SCSI] zfcp: Use common code definitions for FC CT structs [SCSI] zfcp: Use common code definitions for FC ELS structs [SCSI] zfcp: Update FCP protocol related code [SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport [SCSI] zfcp: Assign scheduled work to driver queue [SCSI] zfcp: Remove STATUS_COMMON_REMOVE flag as it is not required anymore [SCSI] zfcp: Implement module unloading [SCSI] zfcp: Merge trace code for fsf requests in one function [SCSI] zfcp: Access ports and units with container_of in sysfs code [SCSI] zfcp: Remove suspend callback [SCSI] zfcp: Remove global config_mutex [SCSI] zfcp: Replace local reference counting with common kref ...
2009-12-09RDMA/nes: Fix stale ARP issueFaisal Latif1-10/+27
When the remote node's ethernet address changes, the connection keeps trying to connect using the old address. The connection wil continue failing until the driver is unloaded and loaded again (eiter reboot or rmmod). Fix this by checking that the NIC has the correct address before starting a connection. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: FIN during MPA startup causes timeoutFaisal Latif1-1/+8
A FIN that is received during an MPA start up sequence causes a timeout in iwcm.c. The connection has not been completely closed so the iwcm code is waiting for resources to be cleaned up. This closes the connection so everything cleans up correctly. Signed-off-by: Don Wood <donald.e.wood@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Free kmap() resourcesFaisal Latif3-2/+19
We fail when creating many qps as kmap() fails for sq_vbase. Fix this by doing kunmap() as soon as we are done with sq_vbase. We do kunmap() in one of the locations below: (1) nes_destroy_qp() (2) nes_accept() (3) nes_connect_event We keep a flag to avoid multiple calls to kunmap(). Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Check for zero STagFaisal Latif2-4/+2
STags are generated randomly but the driver does not correctly prevent a zero STag. Using STag zero is privileged and causes a user space application to fail. This change prevents the driver from trying to allocate a zero STag. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Fix Xansation test crash on cm_node ref_countFaisal Latif1-1/+16
While running a Xansation test, an active side node crashed. The problem started on the passive side, which generated an STtag that was 0. The passive side sent a TERMINATE instead of an MPA REJECT msg. The active side, receives TERMINATE and sends connect_err() and set the cm_node state to CLOSED. The passive side sends FIN + ACK after TERMINATE. Active side ends up in handle_ack_pkt() and send_reset(). send_reset() consumes 1 cm_node's ref_count. Because the cm_node is in CLOSED state, which means that cm_node will be destroyed after completion of the connect_err() indication, CM will crash after send_reset(). Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Abnormal listener exit causes loopback node crashFaisal Latif1-13/+3
When the listener is destroyed for a loopback connection, the listener node gets a reset event. This causes a crash as the listener is not expecting a reset event. Code review of cm_event_reset() during debugging showed the cm_id ref count is incremented after calling its event handler and not before. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Fix crash in nes_accept()Faisal Latif2-28/+50
While running IMP_EXT's window test, we saw a crash in nes_accept(). Here is the sequence of what happened: (1) In MVAPICH2, connect request is received for port #0. FIX: Add a nes_connect() check to make sure local or remote tcp port is not 0. (2) Remote node's (passive) TCP stack sends a reset when it gets a connect request because of port = 0. Active side set the connect error to IW_CM_EVENT_STATUS_REJECTED when it received the RST from remote node. FIX: The corect error code is -ECONNRESET. (3) Wrong error code of IW_CM_EVENT_STATUS_REJECTED causes the core to destroy its listener ports. Here there are connections that may have sent an MPA request up and waiting for accept or reject. But the listener and its cm_nodes have been freed already causing the crash noticed. FIX: The cm_node is freed only if its state is not NES_CM_STATE_MPAREQ_RCVD. If cm_node's state is NES_CM_STATE_MPAREQ_RCVD then its new state is set to NES_CM_STATE_LISTENER_DESTROYED and it is not freed. When nes_accept() or nes_reject() is received, its state is checked for NES_CM_STATE_LISTENER_DESTROYED and in this case the cm_node is freed and error is returned. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Resource not freed for REJECTed connectionsFaisal Latif1-0/+2
During testing of REJECT connection error handling, we saw that the cm_id resources are not released. When the retransmit timer expires, we need to send a reset message to remote node before issuing the ABORTED event. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: MPA request/response error checkingFaisal Latif1-2/+29
During Xansation testing, we saw that error handling of MPA frame msg/response is not handled properly. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Fix query of ORD valuesFaisal Latif1-4/+4
The ORD size needs updating as we are supporting more inbound READ resources per connection. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Fix MAX_CM_BUFFER defineFaisal Latif1-1/+3
Change MAX_CM_BUFFER for MPA frames to be conformant to RFC 5044: we need 512 + 20 instead of 512. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Pass correct size to ioremap_nocache()Julia Lawall1-1/+2
The size argument to ioremap_nocache should be the size of desired information, not the pointer to it. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @expression@ expression *x; @@ x = <+... *sizeof(x) ...+>// </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Update copyright and branding stringChien Tung13-17/+16
Update copyright from Intel-NE, Inc. to Intel Corporation. Use proper branding string in Kconfig and simplify description. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Add max_cqe check to nes_create_cq()Chien Tung2-2/+5
Add a check to nes_create_cq() to return -EINVAL if creating a CQ with depth > max_cqe (32766). Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Clean up struct nes_qpChien Tung2-14/+1
Remove unused and not really used variables. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Implement IB_SIGNAL_ALL_WR as an iWARP extensionChien Tung2-8/+13
Add IB_SINGAL_ALL_WR support as an iWARP extension. If set, make sure all WR for the QP are signalled. Consolidate flags used in nesqp structure. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Add additional SFP+ PHY uC status check and PHY resetChien Tung1-6/+22
Add additional PHY uC status check in case PHY firmware is not running properly with heartbeat. Add a hard PHY reset if uC status is 0x0 after initial reset. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Correct fast memory registration implementationChien Tung4-291/+299
Replace alloc_fmr, unmap_fmr, dealloc_fmr and map_phys_fmr with alloc_fast_reg_mr, alloc_fast_reg_page_list, free_fast_reg_page_list. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09IB/ehca: Fix error paths in post_send and post_recvFrank Zago1-36/+31
Always set bad_wr when an immediate error is detected. Do not report success if an error occurred. Signed-off-by: Frank Zago <fzago@systemfabricworks.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/amso1100: Fix error paths in post_send and post_recvFrank Zago1-4/+10
Always set bad_wr when an immediate error is detected. Signed-off-by: Frank Zago <fzago@systemfabricworks.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09IB/uverbs: Fix return of PTR_ERR() of wrong pointer in ib_uverbs_get_context()Roel Kluin1-1/+1
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: Add support for IB_WR_*INVChien Tung1-90/+113
Add support for IB_WR_SEND_WITH_INV, IB_WR_RDMA_READ_WITH_INV and IB_WR_LOCAL_INV. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: In nes_post_recv() always set bad_wr on errorFrank Zago1-2/+5
On error, set bad_wr in nes_post_recv(). Stop processing ib_wr queue when an error is detected. Signed-off-by: Frank Zago <fzago@systemfabricworks.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09RDMA/nes: In nes_post_send() always set bad_wr on errorFrank Zago1-2/+8
On error, set bad_wr in nes_post_send(). Stop processing ib_wr queue when an error is detected. Signed-off-by: Frank Zago <fzago@systemfabricworks.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09IB/ehca: Rework destroy_eq()Alexander Schmidt3-4/+8
The ibmebus_free_irq() function, which might sleep, was called with interrupts disabled. To fix this, make sure that no interrupts are running by killing the interrupt tasklet. Also lock the shca_list_lock to protect against the poll_eqs_timer running concurrently. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09IB/ipath: Use bitmap_weight()Akinobu Mita1-7/+3
Use bitmap_weight() instead of finding all set bits in bitmap by hand. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Ralph Campbell <infinipath@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09IPoIB: Clear ipoib_neigh.dgid in ipoib_neigh_alloc()David J. Wilder1-0/+1
IPoIB can miss a change in destination GID under some conditions. The problem is caused when ipoib_neigh->dgid contains a stale address. The fix is to set ipoib_neigh->dgid to zero in ipoib_neigh_alloc(). This can happen when a system using bonding on its IPoIB interfaces has switched its active interface from interface A to B and back to A. The system that fails over will not correctly processes the 2nd address change, as described below. When an address has changed neighbor->ha is updated with the new address. Each neighbor has an associated ipoib_neigh. ipoib_neigh->dgid also holds a copy of the remote node's hardware address. When an address changes neighbor->ha is updated by the network layer (arp code) with the new address. IPoIB detects this change in ipoib_start_xmit() by comparing neighbor->ha with ipoib_neigh->dgid. The bug is that ipoib_neigh->dgid may already contain the new address (A) thus the change from B to A is missed by ipoib. Here is the sequence of events: ipoib_neigh->dgid = A and neighbor->ha = A The address is switched to B (the first switch) neighbor->ha = B The change is seen in ipoib_start_xmit() -- neighbor->ha != ipoib_neigh->dgid so ipoib_neigh is released, and a new one is allocated. The allocator may return the same chunk of memory that was just released, therefore ipoib_neigh->dgid still contains A at this point. ipoib_neigh->dgid should be updated in neigh_add_path(), but if the following conditions are true dgid is not updated: 1) __path_find() returns a path 2) path->ah is NULL The remote system now switches from address B to A, neighbor->ha is updated to A. Now we have again : ipoib_neigh->dgid = A and neighbor->ha = A Since the addresses are the same ipoib won't process the change in address. Fix this by zeroing out the dgid field when allocating a new struct ipoib_neigh. Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-09Merge branch 'bkl-drivers-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'bkl-drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: agp: Remove the BKL from agp_open inifiband: Remove BKL from ipath_open() mips: Remove BKL from tb0219 drivers: Remove BKL from scx200_gpio drivers: Remove BKL from pc8736x_gpio parisc: Remove BKL from eisa_eeprom rtc: Remove BKL from efirtc input: Remove BKL from hp_sdc_rtc hw_random: Remove BKL from core macintosh: Remove BKL from ans-lcd nvram: Drop the bkl from non-generic nvram_llseek() nvram: Drop the bkl from nvram_llseek() mem_class: Drop the bkl from memory_open() spi: Remove BKL from spidev_open drivers: Remove BKL from cs5535_gpio drivers: Remove BKL from misc_open
2009-12-04[SCSI] iser: set tgt and lu reset timeoutMike Christie1-0/+1
When iser enabled lu reset support it did not set the bit to allow userspace to get/set the timeout. This sets the tgt and lu reset timeout bits. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa3-4/+4
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 08:24:14 +0000