diff options
Diffstat (limited to 'sound/soc/samsung/speyside.c')
| -rw-r--r-- | sound/soc/samsung/speyside.c | 332 |
1 files changed, 332 insertions, 0 deletions
diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c new file mode 100644 index 00000000000..360a333cb7c --- /dev/null +++ b/sound/soc/samsung/speyside.c @@ -0,0 +1,332 @@ +/* + * Speyside audio support + * + * Copyright 2011 Wolfson Microelectronics + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> +#include <linux/gpio.h> + +#include "../codecs/wm8915.h" +#include "../codecs/wm9081.h" + +#define WM8915_HPSEL_GPIO 214 + +static int speyside_set_bias_level(struct snd_soc_card *card, + enum snd_soc_bias_level level) +{ + struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai; + int ret; + + switch (level) { + case SND_SOC_BIAS_STANDBY: + ret = snd_soc_dai_set_sysclk(codec_dai, WM8915_SYSCLK_MCLK1, + 32768, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_pll(codec_dai, WM8915_FLL_MCLK1, + 0, 0, 0); + if (ret < 0) { + pr_err("Failed to stop FLL\n"); + return ret; + } + + default: + break; + } + + return 0; +} + +static int speyside_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret; + + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_pll(codec_dai, 0, WM8915_FLL_MCLK1, + 32768, 256 * 48000); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, WM8915_SYSCLK_FLL, + 256 * 48000, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops speyside_ops = { + .hw_params = speyside_hw_params, +}; + +static struct snd_soc_jack speyside_headset; + +/* Headset jack detection DAPM pins */ +static struct snd_soc_jack_pin speyside_headset_pins[] = { + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, +}; + +/* Default the headphone selection to active high */ +static int speyside_jack_polarity; + +static int speyside_get_micbias(struct snd_soc_dapm_widget *source, + struct snd_soc_dapm_widget *sink) +{ + if (speyside_jack_polarity && (strcmp(source->name, "MICB1") == 0)) + return 1; + if (!speyside_jack_polarity && (strcmp(source->name, "MICB2") == 0)) + return 1; + + return 0; +} + +static void speyside_set_polarity(struct snd_soc_codec *codec, + int polarity) +{ + speyside_jack_polarity = !polarity; + gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity); + + /* Re-run DAPM to make sure we're using the correct mic bias */ + snd_soc_dapm_sync(&codec->dapm); +} + +static int speyside_wm8915_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_dai *dai = rtd->codec_dai; + struct snd_soc_codec *codec = rtd->codec; + int ret; + + ret = snd_soc_dai_set_sysclk(dai, WM8915_SYSCLK_MCLK1, 32768, 0); + if (ret < 0) + return ret; + + ret = gpio_request(WM8915_HPSEL_GPIO, "HP_SEL"); + if (ret != 0) + pr_err("Failed to request HP_SEL GPIO: %d\n", ret); + gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity); + + ret = snd_soc_jack_new(codec, "Headset", + SND_JACK_HEADSET | SND_JACK_BTN_0, + &speyside_headset); + if (ret) + return ret; + + ret = snd_soc_jack_add_pins(&speyside_headset, + ARRAY_SIZE(speyside_headset_pins), + speyside_headset_pins); + if (ret) + return ret; + + wm8915_detect(codec, &speyside_headset, speyside_set_polarity); + + return 0; +} + +static int speyside_late_probe(struct snd_soc_card *card) +{ + snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone"); + snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic"); + snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC"); + snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC"); + snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker"); + snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output"); + snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input"); + + return 0; +} + +static struct snd_soc_dai_link speyside_dai[] = { + { + .name = "CPU", + .stream_name = "CPU", + .cpu_dai_name = "samsung-i2s.0", + .codec_dai_name = "wm8915-aif1", + .platform_name = "samsung-audio", + .codec_name = "wm8915.1-001a", + .init = speyside_wm8915_init, + .ops = &speyside_ops, + }, + { + .name = "Baseband", + .stream_name = "Baseband", + .cpu_dai_name = "wm8915-aif2", + .codec_dai_name = "wm1250-ev1", + .codec_name = "wm1250-ev1.1-0027", + .ops = &speyside_ops, + .ignore_suspend = 1, + }, +}; + +static int speyside_wm9081_init(struct snd_soc_dapm_context *dapm) +{ + snd_soc_dapm_nc_pin(dapm, "LINEOUT"); + + /* At any time the WM9081 is active it will have this clock */ + return snd_soc_codec_set_sysclk(dapm->codec, WM9081_SYSCLK_MCLK, + 48000 * 256, 0); +} + +static struct snd_soc_aux_dev speyside_aux_dev[] = { + { + .name = "wm9081", + .codec_name = "wm9081.1-006c", + .init = speyside_wm9081_init, + }, +}; + +static struct snd_soc_codec_conf speyside_codec_conf[] = { + { + .dev_name = "wm9081.1-006c", + .name_prefix = "Sub", + }, +}; + +static const struct snd_kcontrol_new controls[] = { + SOC_DAPM_PIN_SWITCH("Main Speaker"), + SOC_DAPM_PIN_SWITCH("Main DMIC"), + SOC_DAPM_PIN_SWITCH("Main AMIC"), + SOC_DAPM_PIN_SWITCH("WM1250 Input"), + SOC_DAPM_PIN_SWITCH("WM1250 Output"), +}; + +static struct snd_soc_dapm_widget widgets[] = { + SND_SOC_DAPM_HP("Headphone", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + + SND_SOC_DAPM_SPK("Main Speaker", NULL), + + SND_SOC_DAPM_MIC("Main AMIC", NULL), + SND_SOC_DAPM_MIC("Main DMIC", NULL), +}; + +static struct snd_soc_dapm_route audio_paths[] = { + { "IN1RN", NULL, "MICB1" }, + { "IN1RP", NULL, "MICB1" }, + { "IN1RN", NULL, "MICB2" }, + { "IN1RP", NULL, "MICB2" }, + { "MICB1", NULL, "Headset Mic", speyside_get_micbias }, + { "MICB2", NULL, "Headset Mic", speyside_get_micbias }, + + { "IN1LP", NULL, "MICB2" }, + { "IN1RN", NULL, "MICB1" }, + { "MICB2", NULL, "Main AMIC" }, + + { "DMIC1DAT", NULL, "MICB1" }, + { "DMIC2DAT", NULL, "MICB1" }, + { "MICB1", NULL, "Main DMIC" }, + + { "Headphone", NULL, "HPOUT1L" }, + { "Headphone", NULL, "HPOUT1R" }, + + { "Sub IN1", NULL, "HPOUT2L" }, + { "Sub IN2", NULL, "HPOUT2R" }, + + { "Main Speaker", NULL, "Sub SPKN" }, + { "Main Speaker", NULL, "Sub SPKP" }, + { "Main Speaker", NULL, "SPKDAT" }, +}; + +static struct snd_soc_card speyside = { + .name = "Speyside", + .dai_link = speyside_dai, + .num_links = ARRAY_SIZE(speyside_dai), + .aux_dev = speyside_aux_dev, + .num_aux_devs = ARRAY_SIZE(speyside_aux_dev), + .codec_conf = speyside_codec_conf, + .num_configs = ARRAY_SIZE(speyside_codec_conf), + + .set_bias_level = speyside_set_bias_level, + + .controls = controls, + .num_controls = ARRAY_SIZE(controls), + .dapm_widgets = widgets, + .num_dapm_widgets = ARRAY_SIZE(widgets), + .dapm_routes = audio_paths, + .num_dapm_routes = ARRAY_SIZE(audio_paths), + + .late_probe = speyside_late_probe, +}; + +static __devinit int speyside_probe(struct platform_device *pdev) +{ + struct snd_soc_card *card = &speyside; + int ret; + + card->dev = &pdev->dev; + + ret = snd_soc_register_card(card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", + ret); + return ret; + } + + return 0; +} + +static int __devexit speyside_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + + snd_soc_unregister_card(card); + + return 0; +} + +static struct platform_driver speyside_driver = { + .driver = { + .name = "speyside", + .owner = THIS_MODULE, + .pm = &snd_soc_pm_ops, + }, + .probe = speyside_probe, + .remove = __devexit_p(speyside_remove), +}; + +static int __init speyside_audio_init(void) +{ + return platform_driver_register(&speyside_driver); +} +module_init(speyside_audio_init); + +static void __exit speyside_audio_exit(void) +{ + platform_driver_unregister(&speyside_driver); +} +module_exit(speyside_audio_exit); + +MODULE_DESCRIPTION("Speyside audio support"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:speyside"); |