summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-powerpc/ucc_fast.h3
-rw-r--r--include/linux/fsl_devices.h39
-rw-r--r--include/linux/hdlc.h3
-rw-r--r--include/linux/pci_ids.h2
-rw-r--r--include/linux/phy.h1
-rw-r--r--include/linux/wireless.h2
-rw-r--r--include/net/ieee80211.h4
-rw-r--r--include/net/ieee80211_crypt.h4
-rw-r--r--include/net/ieee80211_radiotap.h77
9 files changed, 64 insertions, 71 deletions
diff --git a/include/asm-powerpc/ucc_fast.h b/include/asm-powerpc/ucc_fast.h
index 39d1c90fd2c..f529f70b1d8 100644
--- a/include/asm-powerpc/ucc_fast.h
+++ b/include/asm-powerpc/ucc_fast.h
@@ -159,6 +159,9 @@ struct ucc_fast_private {
struct ucc_fast *uf_regs; /* a pointer to memory map of UCC regs. */
u32 *p_ucce; /* a pointer to the event register in memory. */
u32 *p_uccm; /* a pointer to the mask register in memory. */
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+ u16 *p_utodr; /* pointer to the transmit on demand register */
+#endif
int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
int stopped_tx; /* Whether channel has been stopped for Tx
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index abb64c437f6..73710d61777 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -120,44 +120,5 @@ struct fsl_spi_platform_data {
u32 sysclk;
};
-/* Ethernet interface (phy management and speed)
-*/
-enum enet_interface {
- ENET_10_MII, /* 10 Base T, MII interface */
- ENET_10_RMII, /* 10 Base T, RMII interface */
- ENET_10_RGMII, /* 10 Base T, RGMII interface */
- ENET_100_MII, /* 100 Base T, MII interface */
- ENET_100_RMII, /* 100 Base T, RMII interface */
- ENET_100_RGMII, /* 100 Base T, RGMII interface */
- ENET_1000_GMII, /* 1000 Base T, GMII interface */
- ENET_1000_RGMII, /* 1000 Base T, RGMII interface */
- ENET_1000_TBI, /* 1000 Base T, TBI interface */
- ENET_1000_RTBI /* 1000 Base T, RTBI interface */
-};
-
-struct ucc_geth_platform_data {
- /* device specific information */
- u32 device_flags;
- u32 phy_reg_addr;
-
- /* board specific information */
- u32 board_flags;
- u8 rx_clock;
- u8 tx_clock;
- u32 phy_id;
- enum enet_interface phy_interface;
- u32 phy_interrupt;
- u8 mac_addr[6];
-};
-
-/* Flags related to UCC Gigabit Ethernet device features */
-#define FSL_UGETH_DEV_HAS_GIGABIT 0x00000001
-#define FSL_UGETH_DEV_HAS_COALESCE 0x00000002
-#define FSL_UGETH_DEV_HAS_RMON 0x00000004
-
-/* Flags in ucc_geth_platform_data */
-#define FSL_UGETH_BRD_HAS_PHY_INTR 0x00000001
- /* if not set use a timer */
-
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index 0fe562af9c8..db390c511ad 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -43,8 +43,7 @@ struct hdlc_proto {
void (*stop)(struct net_device *dev); /* if open & !DCD */
void (*detach)(struct net_device *dev);
int (*ioctl)(struct net_device *dev, struct ifreq *ifr);
- unsigned short (*type_trans)(struct sk_buff *skb,
- struct net_device *dev);
+ __be16 (*type_trans)(struct sk_buff *skb, struct net_device *dev);
struct module *module;
struct hdlc_proto *next; /* next protocol in the list */
};
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 5f21b0f68b4..1b0ddbb8a80 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1458,6 +1458,8 @@
#define PCI_VENDOR_ID_TOSHIBA_2 0x102f
#define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030
+#define PCI_DEVICE_ID_TOSHIBA_TC35815_NWU 0x0031
+#define PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939 0x0032
#define PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE 0x0105
#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108
#define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3
diff --git a/include/linux/phy.h b/include/linux/phy.h
index edd4c88ca7d..2a659789f9c 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -55,6 +55,7 @@ typedef enum {
PHY_INTERFACE_MODE_TBI,
PHY_INTERFACE_MODE_RMII,
PHY_INTERFACE_MODE_RGMII,
+ PHY_INTERFACE_MODE_RGMII_ID,
PHY_INTERFACE_MODE_RTBI
} phy_interface_t;
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index 48759b2f57d..0987aa7a6cf 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@@ -186,7 +186,7 @@
* - Wireless Event capability in struct iw_range
* - Add support for relative TxPower (yick !)
*
- * V17 to V18 (From Jouni Malinen <jkmaline@cc.hut.fi>)
+ * V17 to V18 (From Jouni Malinen <j@w1.fi>)
* ----------
* - Add support for WPA/WPA2
* - Add extended encoding configuration (SIOCSIWENCODEEXT and
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index e02d85f56e6..d56b2923d61 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -6,8 +6,8 @@
* LAN access point) driver for Intersil Prism2/2.5/3.
*
* Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * <j@w1.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
*
* Adaption to a generic IEEE 802.11 stack by James Ketrenos
* <jketreno@linux.intel.com>
diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h
index eb476414fd7..b3d65e0bedd 100644
--- a/include/net/ieee80211_crypt.h
+++ b/include/net/ieee80211_crypt.h
@@ -3,8 +3,8 @@
* for Intersil Prism2/2.5/3.
*
* Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * <j@w1.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
*
* Adaption to a generic IEEE 802.11 stack by James Ketrenos
* <jketreno@linux.intel.com>
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index 429b73892a5..a0c2b41a24d 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -66,7 +66,9 @@
*/
#define IEEE80211_RADIOTAP_HDRLEN 64
-/* The radio capture header precedes the 802.11 header. */
+/* The radio capture header precedes the 802.11 header.
+ * All data in the header is little endian on all platforms.
+ */
struct ieee80211_radiotap_header {
u8 it_version; /* Version 0. Only increases
* for drastic changes,
@@ -74,12 +76,12 @@ struct ieee80211_radiotap_header {
* new fields does not count.
*/
u8 it_pad;
- u16 it_len; /* length of the whole
+ __le16 it_len; /* length of the whole
* header in bytes, including
* it_version, it_pad,
* it_len, and data fields.
*/
- u32 it_present; /* A bitmap telling which
+ __le32 it_present; /* A bitmap telling which
* fields are present. Set bit 31
* (0x80000000) to extend the
* bitmap by another 32 bits.
@@ -88,89 +90,102 @@ struct ieee80211_radiotap_header {
*/
};
-/* Name Data type Units
- * ---- --------- -----
+/* Name Data type Units
+ * ---- --------- -----
*
- * IEEE80211_RADIOTAP_TSFT u64 microseconds
+ * IEEE80211_RADIOTAP_TSFT __le64 microseconds
*
* Value in microseconds of the MAC's 64-bit 802.11 Time
* Synchronization Function timer when the first bit of the
* MPDU arrived at the MAC. For received frames, only.
*
- * IEEE80211_RADIOTAP_CHANNEL 2 x u16 MHz, bitmap
+ * IEEE80211_RADIOTAP_CHANNEL 2 x __le16 MHz, bitmap
*
* Tx/Rx frequency in MHz, followed by flags (see below).
*
- * IEEE80211_RADIOTAP_FHSS u16 see below
+ * IEEE80211_RADIOTAP_FHSS __le16 see below
*
* For frequency-hopping radios, the hop set (first byte)
* and pattern (second byte).
*
- * IEEE80211_RADIOTAP_RATE u8 500kb/s
+ * IEEE80211_RADIOTAP_RATE u8 500kb/s
*
* Tx/Rx data rate
*
- * IEEE80211_RADIOTAP_DBM_ANTSIGNAL int8_t decibels from
- * one milliwatt (dBm)
+ * IEEE80211_RADIOTAP_DBM_ANTSIGNAL s8 decibels from
+ * one milliwatt (dBm)
*
* RF signal power at the antenna, decibel difference from
* one milliwatt.
*
- * IEEE80211_RADIOTAP_DBM_ANTNOISE int8_t decibels from
- * one milliwatt (dBm)
+ * IEEE80211_RADIOTAP_DBM_ANTNOISE s8 decibels from
+ * one milliwatt (dBm)
*
* RF noise power at the antenna, decibel difference from one
* milliwatt.
*
- * IEEE80211_RADIOTAP_DB_ANTSIGNAL u8 decibel (dB)
+ * IEEE80211_RADIOTAP_DB_ANTSIGNAL u8 decibel (dB)
*
* RF signal power at the antenna, decibel difference from an
* arbitrary, fixed reference.
*
- * IEEE80211_RADIOTAP_DB_ANTNOISE u8 decibel (dB)
+ * IEEE80211_RADIOTAP_DB_ANTNOISE u8 decibel (dB)
*
* RF noise power at the antenna, decibel difference from an
* arbitrary, fixed reference point.
*
- * IEEE80211_RADIOTAP_LOCK_QUALITY u16 unitless
+ * IEEE80211_RADIOTAP_LOCK_QUALITY __le16 unitless
*
* Quality of Barker code lock. Unitless. Monotonically
* nondecreasing with "better" lock strength. Called "Signal
* Quality" in datasheets. (Is there a standard way to measure
* this?)
*
- * IEEE80211_RADIOTAP_TX_ATTENUATION u16 unitless
+ * IEEE80211_RADIOTAP_TX_ATTENUATION __le16 unitless
*
* Transmit power expressed as unitless distance from max
* power set at factory calibration. 0 is max power.
* Monotonically nondecreasing with lower power levels.
*
- * IEEE80211_RADIOTAP_DB_TX_ATTENUATION u16 decibels (dB)
+ * IEEE80211_RADIOTAP_DB_TX_ATTENUATION __le16 decibels (dB)
*
* Transmit power expressed as decibel distance from max power
* set at factory calibration. 0 is max power. Monotonically
* nondecreasing with lower power levels.
*
- * IEEE80211_RADIOTAP_DBM_TX_POWER int8_t decibels from
- * one milliwatt (dBm)
+ * IEEE80211_RADIOTAP_DBM_TX_POWER s8 decibels from
+ * one milliwatt (dBm)
*
* Transmit power expressed as dBm (decibels from a 1 milliwatt
* reference). This is the absolute power level measured at
* the antenna port.
*
- * IEEE80211_RADIOTAP_FLAGS u8 bitmap
+ * IEEE80211_RADIOTAP_FLAGS u8 bitmap
*
* Properties of transmitted and received frames. See flags
* defined below.
*
- * IEEE80211_RADIOTAP_ANTENNA u8 antenna index
+ * IEEE80211_RADIOTAP_ANTENNA u8 antenna index
*
* Unitless indication of the Rx/Tx antenna for this packet.
* The first antenna is antenna 0.
*
- * IEEE80211_RADIOTAP_FCS u32 data
+ * IEEE80211_RADIOTAP_RX_FLAGS __le16 bitmap
+ *
+ * Properties of received frames. See flags defined below.
+ *
+ * IEEE80211_RADIOTAP_TX_FLAGS __le16 bitmap
+ *
+ * Properties of transmitted frames. See flags defined below.
+ *
+ * IEEE80211_RADIOTAP_RTS_RETRIES u8 data
+ *
+ * Number of rts retries a transmitted frame used.
+ *
+ * IEEE80211_RADIOTAP_DATA_RETRIES u8 data
+ *
+ * Number of unicast retries a transmitted frame used.
*
- * FCS from frame in network byte order.
*/
enum ieee80211_radiotap_type {
IEEE80211_RADIOTAP_TSFT = 0,
@@ -187,7 +202,11 @@ enum ieee80211_radiotap_type {
IEEE80211_RADIOTAP_ANTENNA = 11,
IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
- IEEE80211_RADIOTAP_EXT = 31,
+ IEEE80211_RADIOTAP_RX_FLAGS = 14,
+ IEEE80211_RADIOTAP_TX_FLAGS = 15,
+ IEEE80211_RADIOTAP_RTS_RETRIES = 16,
+ IEEE80211_RADIOTAP_DATA_RETRIES = 17,
+ IEEE80211_RADIOTAP_EXT = 31
};
/* Channel flags. */
@@ -219,6 +238,14 @@ enum ieee80211_radiotap_type {
* 802.11 header and payload
* (to 32-bit boundary)
*/
+/* For IEEE80211_RADIOTAP_RX_FLAGS */
+#define IEEE80211_RADIOTAP_F_RX_BADFCS 0x0001 /* frame failed crc check */
+
+/* For IEEE80211_RADIOTAP_TX_FLAGS */
+#define IEEE80211_RADIOTAP_F_TX_FAIL 0x0001 /* failed due to excessive
+ * retries */
+#define IEEE80211_RADIOTAP_F_TX_CTS 0x0002 /* used cts 'protection' */
+#define IEEE80211_RADIOTAP_F_TX_RTS 0x0004 /* used rts/cts handshake */
/* Ugly macro to convert literal channel numbers into their mhz equivalents
* There are certianly some conditions that will break this (like feeding it '30')