diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/char/ipmi/ipmi_bt_sm.c | 641 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_kcs_sm.c | 14 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_intf.c | 12 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_smic_sm.c | 14 |
4 files changed, 417 insertions, 264 deletions
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c index 0030cd8e2e9..6c59baa887a 100644 --- a/drivers/char/ipmi/ipmi_bt_sm.c +++ b/drivers/char/ipmi/ipmi_bt_sm.c @@ -33,11 +33,13 @@ #include <linux/ipmi_msgdefs.h> /* for completion codes */ #include "ipmi_si_sm.h" -static int bt_debug = 0x00; /* Production value 0, see following flags */ +#define BT_DEBUG_OFF 0 /* Used in production */ +#define BT_DEBUG_ENABLE 1 /* Generic messages */ +#define BT_DEBUG_MSG 2 /* Prints all request/response buffers */ +#define BT_DEBUG_STATES 4 /* Verbose look at state changes */ + +static int bt_debug = BT_DEBUG_OFF; -#define BT_DEBUG_ENABLE 1 -#define BT_DEBUG_MSG 2 -#define BT_DEBUG_STATES 4 module_param(bt_debug, int, 0644); MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states"); @@ -47,38 +49,54 @@ MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states"); Since the Open IPMI architecture is single-message oriented at this stage, the queue depth of BT is of no concern. */ -#define BT_NORMAL_TIMEOUT 5000000 /* seconds in microseconds */ -#define BT_RETRY_LIMIT 2 -#define BT_RESET_DELAY 6000000 /* 6 seconds after warm reset */ +#define BT_NORMAL_TIMEOUT 5 /* seconds */ +#define BT_NORMAL_RETRY_LIMIT 2 +#define BT_RESET_DELAY 6 /* seconds after warm reset */ + +/* States are written in chronological order and usually cover + multiple rows of the state table discussion in the IPMI spec. */ enum bt_states { - BT_STATE_IDLE, + BT_STATE_IDLE = 0, /* Order is critical in this list */ BT_STATE_XACTION_START, BT_STATE_WRITE_BYTES, - BT_STATE_WRITE_END, BT_STATE_WRITE_CONSUME, - BT_STATE_B2H_WAIT, - BT_STATE_READ_END, - BT_STATE_RESET1, /* These must come last */ + BT_STATE_READ_WAIT, + BT_STATE_CLEAR_B2H, + BT_STATE_READ_BYTES, + BT_STATE_RESET1, /* These must come last */ BT_STATE_RESET2, BT_STATE_RESET3, BT_STATE_RESTART, - BT_STATE_HOSED + BT_STATE_PRINTME, + BT_STATE_CAPABILITIES_BEGIN, + BT_STATE_CAPABILITIES_END, + BT_STATE_LONG_BUSY /* BT doesn't get hosed :-) */ }; +/* Macros seen at the end of state "case" blocks. They help with legibility + and debugging. */ + +#define BT_STATE_CHANGE(X,Y) { bt->state = X; return Y; } + +#define BT_SI_SM_RETURN(Y) { last_printed = BT_STATE_PRINTME; return Y; } + struct si_sm_data { enum bt_states state; - enum bt_states last_state; /* assist printing and resets */ unsigned char seq; /* BT sequence number */ struct si_sm_io *io; - unsigned char write_data[IPMI_MAX_MSG_LENGTH]; - int write_count; - unsigned char read_data[IPMI_MAX_MSG_LENGTH]; - int read_count; - int truncated; - long timeout; - unsigned int error_retries; /* end of "common" fields */ + unsigned char write_data[IPMI_MAX_MSG_LENGTH]; + int write_count; + unsigned char read_data[IPMI_MAX_MSG_LENGTH]; + int read_count; + int truncated; + long timeout; /* microseconds countdown */ + int error_retries; /* end of "common" fields */ int nonzero_status; /* hung BMCs stay all 0 */ + enum bt_states complete; /* to divert the state machine */ + int BT_CAP_outreqs; + long BT_CAP_req2rsp; + int BT_CAP_retries; /* Recommended retries */ }; #define BT_CLR_WR_PTR 0x01 /* See IPMI 1.5 table 11.6.4 */ @@ -111,86 +129,118 @@ struct si_sm_data { static char *state2txt(unsigned char state) { switch (state) { - case BT_STATE_IDLE: return("IDLE"); - case BT_STATE_XACTION_START: return("XACTION"); - case BT_STATE_WRITE_BYTES: return("WR_BYTES"); - case BT_STATE_WRITE_END: return("WR_END"); - case BT_STATE_WRITE_CONSUME: return("WR_CONSUME"); - case BT_STATE_B2H_WAIT: return("B2H_WAIT"); - case BT_STATE_READ_END: return("RD_END"); - case BT_STATE_RESET1: return("RESET1"); - case BT_STATE_RESET2: return("RESET2"); - case BT_STATE_RESET3: return("RESET3"); - case BT_STATE_RESTART: return("RESTART"); - case BT_STATE_HOSED: return("HOSED"); + case BT_STATE_IDLE: return("IDLE"); + case BT_STATE_XACTION_START: return("XACTION"); + case BT_STATE_WRITE_BYTES: return("WR_BYTES"); + case BT_STATE_WRITE_CONSUME: return("WR_CONSUME"); + case BT_STATE_READ_WAIT: return("RD_WAIT"); + case BT_STATE_CLEAR_B2H: return("CLEAR_B2H"); + case BT_STATE_READ_BYTES: return("RD_BYTES"); + case BT_STATE_RESET1: return("RESET1"); + case BT_STATE_RESET2: return("RESET2"); + case BT_STATE_RESET3: return("RESET3"); + case BT_STATE_RESTART: return("RESTART"); + case BT_STATE_LONG_BUSY: return("LONG_BUSY"); + case BT_STATE_CAPABILITIES_BEGIN: return("CAP_BEGIN"); + case BT_STATE_CAPABILITIES_END: return("CAP_END"); } return("BAD STATE"); } #define STATE2TXT state2txt(bt->state) -static char *status2txt(unsigned char status, char *buf) +static char *status2txt(unsigned char status) { + /* + * This cannot be called by two threads at the same time and + * the buffer is always consumed immediately, so the static is + * safe to use. + */ + static char buf[40]; + strcpy(buf, "[ "); - if (status & BT_B_BUSY) strcat(buf, "B_BUSY "); - if (status & BT_H_BUSY) strcat(buf, "H_BUSY "); - if (status & BT_OEM0) strcat(buf, "OEM0 "); - if (status & BT_SMS_ATN) strcat(buf, "SMS "); - if (status & BT_B2H_ATN) strcat(buf, "B2H "); - if (status & BT_H2B_ATN) strcat(buf, "H2B "); + if (status & BT_B_BUSY) + strcat(buf, "B_BUSY "); + if (status & BT_H_BUSY) + strcat(buf, "H_BUSY "); + if (status & BT_OEM0) + strcat(buf, "OEM0 "); + if (status & BT_SMS_ATN) + strcat(buf, "SMS "); + if (status & BT_B2H_ATN) + strcat(buf, "B2H "); + if (status & BT_H2B_ATN) + strcat(buf, "H2B "); strcat(buf, "]"); return buf; } -#define STATUS2TXT(buf) status2txt(status, buf) +#define STATUS2TXT status2txt(status) + +/* called externally at insmod time, and internally on cleanup */ -/* This will be called from within this module on a hosed condition */ -#define FIRST_SEQ 0 static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io) { - bt->state = BT_STATE_IDLE; - bt->last_state = BT_STATE_IDLE; - bt->seq = FIRST_SEQ; - bt->io = io; - bt->write_count = 0; - bt->read_count = 0; - bt->error_retries = 0; - bt->nonzero_status = 0; - bt->truncated = 0; - bt->timeout = BT_NORMAL_TIMEOUT; + memset(bt, 0, sizeof(struct si_sm_data)); + if (bt->io != io) { /* external: one-time only things */ + bt->io = io; + bt->seq = 0; + } + bt->state = BT_STATE_IDLE; /* start here */ + bt->complete = BT_STATE_IDLE; /* end here */ + bt->BT_CAP_req2rsp = BT_NORMAL_TIMEOUT * 1000000; + bt->BT_CAP_retries = BT_NORMAL_RETRY_LIMIT; + /* BT_CAP_outreqs == zero is a flag to read BT Capabilities */ return 3; /* We claim 3 bytes of space; ought to check SPMI table */ } +/* Jam a completion code (probably an error) into a response */ + +static void force_result(struct si_sm_data *bt, unsigned char completion_code) +{ + bt->read_data[0] = 4; /* # following bytes */ + bt->read_data[1] = bt->write_data[1] | 4; /* Odd NetFn/LUN */ + bt->read_data[2] = bt->write_data[2]; /* seq (ignored) */ + bt->read_data[3] = bt->write_data[3]; /* Command */ + bt->read_data[4] = completion_code; + bt->read_count = 5; +} + +/* The upper state machine starts here */ + static int bt_start_transaction(struct si_sm_data *bt, unsigned char *data, unsigned int size) { unsigned int i; - if ((size < 2) || (size > (IPMI_MAX_MSG_LENGTH - 2))) - return -1; + if (size < 2) + return IPMI_REQ_LEN_INVALID_ERR; + if (size > IPMI_MAX_MSG_LENGTH) + return IPMI_REQ_LEN_EXCEEDED_ERR; - if ((bt->state != BT_STATE_IDLE) && (bt->state != BT_STATE_HOSED)) - return -2; + if (bt->state == BT_STATE_LONG_BUSY) + return IPMI_NODE_BUSY_ERR; + + if (bt->state != BT_STATE_IDLE) + return IPMI_NOT_IN_MY_STATE_ERR; if (bt_debug & BT_DEBUG_MSG) { - printk(KERN_WARNING "+++++++++++++++++++++++++++++++++++++\n"); - printk(KERN_WARNING "BT: write seq=0x%02X:", bt->seq); + printk(KERN_WARNING "BT: +++++++++++++++++ New command\n"); + printk(KERN_WARNING "BT: NetFn/LUN CMD [%d data]:", size - 2); for (i = 0; i < size; i ++) - printk (" %02x", data[i]); + printk (" %02x", data[i]); printk("\n"); } bt->write_data[0] = size + 1; /* all data plus seq byte */ bt->write_data[1] = *data; /* NetFn/LUN */ - bt->write_data[2] = bt->seq; + bt->write_data[2] = bt->seq++; memcpy(bt->write_data + 3, data + 1, size - 1); bt->write_count = size + 2; - bt->error_retries = 0; bt->nonzero_status = 0; - bt->read_count = 0; bt->truncated = 0; bt->state = BT_STATE_XACTION_START; - bt->last_state = BT_STATE_IDLE; - bt->timeout = BT_NORMAL_TIMEOUT; + bt->timeout = bt->BT_CAP_req2rsp; + force_result(bt, IPMI_ERR_UNSPECIFIED); return 0; } @@ -198,38 +248,30 @@ static int bt_start_transaction(struct si_sm_data *bt, it calls this. Strip out the length and seq bytes. */ static int bt_get_result(struct si_sm_data *bt, - unsigned char *data, - unsigned int length) + unsigned char *data, + unsigned int length) { int i, msg_len; msg_len = bt->read_count - 2; /* account for length & seq */ - /* Always NetFn, Cmd, cCode */ if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH) { - printk(KERN_DEBUG "BT results: bad msg_len = %d\n", msg_len); - data[0] = bt->write_data[1] | 0x4; /* Kludge a response */ - data[1] = bt->write_data[3]; - data[2] = IPMI_ERR_UNSPECIFIED; + force_result(bt, IPMI_ERR_UNSPECIFIED); msg_len = 3; - } else { - data[0] = bt->read_data[1]; - data[1] = bt->read_data[3]; - if (length < msg_len) - bt->truncated = 1; - if (bt->truncated) { /* can be set in read_all_bytes() */ - data[2] = IPMI_ERR_MSG_TRUNCATED; - msg_len = 3; - } else - memcpy(data + 2, bt->read_data + 4, msg_len - 2); + } + data[0] = bt->read_data[1]; + data[1] = bt->read_data[3]; + if (length < msg_len || bt->truncated) { + data[2] = IPMI_ERR_MSG_TRUNCATED; + msg_len = 3; + } else + memcpy(data + 2, bt->read_data + 4, msg_len - 2); - if (bt_debug & BT_DEBUG_MSG) { - printk (KERN_WARNING "BT: res (raw)"); - for (i = 0; i < msg_len; i++) - printk(" %02x", data[i]); - printk ("\n"); - } + if (bt_debug & BT_DEBUG_MSG) { + printk (KERN_WARNING "BT: result %d bytes:", msg_len); + for (i = 0; i < msg_len; i++) + printk(" %02x", data[i]); + printk ("\n"); } - bt->read_count = 0; /* paranoia */ return msg_len; } @@ -238,22 +280,40 @@ static int bt_get_result(struct si_sm_data *bt, static void reset_flags(struct si_sm_data *bt) { + if (bt_debug) + printk(KERN_WARNING "IPMI BT: flag reset %s\n", + status2txt(BT_STATUS)); if (BT_STATUS & BT_H_BUSY) - BT_CONTROL(BT_H_BUSY); - if (BT_STATUS & BT_B_BUSY) - BT_CONTROL(BT_B_BUSY); - BT_CONTROL(BT_CLR_WR_PTR); - BT_CONTROL(BT_SMS_ATN); - - if (BT_STATUS & BT_B2H_ATN) { - int i; - BT_CONTROL(BT_H_BUSY); - BT_CONTROL(BT_B2H_ATN); - BT_CONTROL(BT_CLR_RD_PTR); - for (i = 0; i < IPMI_MAX_MSG_LENGTH + 2; i++) - BMC2HOST; - BT_CONTROL(BT_H_BUSY); - } + BT_CONTROL(BT_H_BUSY); /* force clear */ + BT_CONTROL(BT_CLR_WR_PTR); /* always reset */ + BT_CONTROL(BT_SMS_ATN); /* always clear */ + BT_INTMASK_W(BT_BMC_HWRST); +} + +/* Get rid of an unwanted/stale response. This should only be needed for + BMCs that support multiple outstanding requests. */ + +static void drain_BMC2HOST(struct si_sm_data *bt) +{ + int i, size; + + if (!(BT_STATUS & BT_B2H_ATN)) /* Not signalling a response */ + return; + + BT_CONTROL(BT_H_BUSY); /* now set */ + BT_CONTROL(BT_B2H_ATN); /* always clear */ + BT_STATUS; /* pause */ + BT_CONTROL(BT_B2H_ATN); /* some BMCs are stubborn */ + BT_CONTROL(BT_CLR_RD_PTR); /* always reset */ + if (bt_debug) + printk(KERN_WARNING "IPMI BT: stale response %s; ", + status2txt(BT_STATUS)); + size = BMC2HOST; + for (i = 0; i < size ; i++) + BMC2HOST; + BT_CONTROL(BT_H_BUSY); /* now clear */ + if (bt_debug) + printk("drained %d bytes\n", size + 1); } static inline void write_all_bytes(struct si_sm_data *bt) @@ -261,201 +321,256 @@ static inline void write_all_bytes(struct si_sm_data *bt) int i; if (bt_debug & BT_DEBUG_MSG) { - printk(KERN_WARNING "BT: write %d bytes seq=0x%02X", + printk(KERN_WARNING "BT: write %d bytes seq=0x%02X", bt->write_count, bt->seq); for (i = 0; i < bt->write_count; i++) printk (" %02x", bt->write_data[i]); printk ("\n"); } for (i = 0; i < bt->write_count; i++) - HOST2BMC(bt->write_data[i]); + HOST2BMC(bt->write_data[i]); } static inline int read_all_bytes(struct si_sm_data *bt) { unsigned char i; + /* length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode. + Keep layout of first four bytes aligned with write_data[] */ + bt->read_data[0] = BMC2HOST; bt->read_count = bt->read_data[0]; - if (bt_debug & BT_DEBUG_MSG) - printk(KERN_WARNING "BT: read %d bytes:", bt->read_count); - /* minimum: length, NetFn, Seq, Cmd, cCode == 5 total, or 4 more - following the length byte. */ if (bt->read_count < 4 || bt->read_count >= IPMI_MAX_MSG_LENGTH) { if (bt_debug & BT_DEBUG_MSG) - printk("bad length %d\n", bt->read_count); + printk(KERN_WARNING "BT: bad raw rsp len=%d\n", + bt->read_count); bt->truncated = 1; return 1; /* let next XACTION START clean it up */ } for (i = 1; i <= bt->read_count; i++) - bt->read_data[i] = BMC2HOST; - bt->read_count++; /* account for the length byte */ + bt->read_data[i] = BMC2HOST; + bt->read_count++; /* Account internally for length byte */ if (bt_debug & BT_DEBUG_MSG) { - for (i = 0; i < bt->read_count; i++) + int max = bt->read_count; + + printk(KERN_WARNING "BT: got %d bytes seq=0x%02X", + max, bt->read_data[2]); + if (max > 16) + max = 16; + for (i = 0; i < max; i++) printk (" %02x", bt->read_data[i]); - printk ("\n"); + printk ("%s\n", bt->read_count == max ? "" : " ..."); } - if (bt->seq != bt->write_data[2]) /* idiot check */ - printk(KERN_DEBUG "BT: internal error: sequence mismatch\n"); - /* per the spec, the (NetFn, Seq, Cmd) tuples should match */ - if ((bt->read_data[3] == bt->write_data[3]) && /* Cmd */ - (bt->read_data[2] == bt->write_data[2]) && /* Sequence */ - ((bt->read_data[1] & 0xF8) == (bt->write_data[1] & 0xF8))) + /* per the spec, the (NetFn[1], Seq[2], Cmd[3]) tuples must match */ + if ((bt->read_data[3] == bt->write_data[3]) && + (bt->read_data[2] == bt->write_data[2]) && + ((bt->read_data[1] & 0xF8) == (bt->write_data[1] & 0xF8))) return 1; if (bt_debug & BT_DEBUG_MSG) - printk(KERN_WARNING "BT: bad packet: " + printk(KERN_WARNING "IPMI BT: bad packet: " "want 0x(%02X, %02X, %02X) got (%02X, %02X, %02X)\n", - bt->write_data[1], bt->write_data[2], bt->write_data[3], + bt->write_data[1] | 0x04, bt->write_data[2], bt->write_data[3], bt->read_data[1], bt->read_data[2], bt->read_data[3]); return 0; } -/* Modifies bt->state appropriately, need to get into the bt_event() switch */ +/* Restart if retries are left, or return an error completion code */ -static void error_recovery(struct si_sm_data *bt, char *reason) +static enum si_sm_result error_recovery(struct si_sm_data *bt, + unsigned char status, + unsigned char cCode) { - unsigned char status; - char buf[40]; /* For getting status */ + char *reason; - bt->timeout = BT_NORMAL_TIMEOUT; /* various places want to retry */ + bt->timeout = bt->BT_CAP_req2rsp; - status = BT_STATUS; - printk(KERN_DEBUG "BT: %s in %s %s\n", reason, STATE2TXT, - STATUS2TXT(buf)); + switch (cCode) { + case IPMI_TIMEOUT_ERR: + reason = "timeout"; + break; + default: + reason = "internal error"; + break; + } + + printk(KERN_WARNING "IPMI BT: %s in %s %s ", /* open-ended line */ + reason, STATE2TXT, STATUS2TXT); + /* Per the IPMI spec, retries are based on the sequence number + known only to this module, so manage a restart here. */ (bt->error_retries)++; - if (bt->error_retries > BT_RETRY_LIMIT) { - printk(KERN_DEBUG "retry limit (%d) exceeded\n", BT_RETRY_LIMIT); - bt->state = BT_STATE_HOSED; - if (!bt->nonzero_status) - printk(KERN_ERR "IPMI: BT stuck, try power cycle\n"); - else if (bt->error_retries <= BT_RETRY_LIMIT + 1) { - printk(KERN_DEBUG "IPMI: BT reset (takes 5 secs)\n"); - bt->state = BT_STATE_RESET1; - } - return; + if (bt->error_retries < bt->BT_CAP_retries) { + printk("%d retries left\n", + bt->BT_CAP_retries - bt->error_retries); + bt->state = BT_STATE_RESTART; + return SI_SM_CALL_WITHOUT_DELAY; } - /* Sometimes the BMC queues get in an "off-by-one" state...*/ - if ((bt->state == BT_STATE_B2H_WAIT) && (status & BT_B2H_ATN)) { - printk(KERN_DEBUG "retry B2H_WAIT\n"); - return; + printk("failed %d retries, sending error response\n", + bt->BT_CAP_retries); + if (!bt->nonzero_status) + printk(KERN_ERR "IPMI BT: stuck, try power cycle\n"); + + /* this is most likely during insmod */ + else if (bt->seq <= (unsigned char)(bt->BT_CAP_retries & 0xFF)) { + printk(KERN_WARNING "IPMI: BT reset (takes 5 secs)\n"); + bt->state = BT_STATE_RESET1; + return SI_SM_CALL_WITHOUT_DELAY; } - printk(KERN_DEBUG "restart command\n"); - bt->state = BT_STATE_RESTART; + /* Concoct a useful error message, set up the next state, and + be done with this sequence. */ + + bt->state = BT_STATE_IDLE; + switch (cCode) { + case IPMI_TIMEOUT_ERR: + if (status & BT_B_BUSY) { + cCode = IPMI_NODE_BUSY_ERR; + bt->state = BT_STATE_LONG_BUSY; + } + break; + default: + break; + } + force_result(bt, cCode); + return SI_SM_TRANSACTION_COMPLETE; } -/* Check the status and (possibly) advance the BT state machine. The - default return is SI_SM_CALL_WITH_DELAY. */ +/* Check status and (usually) take action and change this state machine. */ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) { - unsigned char status; - char buf[40]; /* For getting status */ + unsigned char status, BT_CAP[8]; + static enum bt_states last_printed = BT_STATE_PRINTME; int i; status = BT_STATUS; bt->nonzero_status |= status; - - if ((bt_debug & BT_DEBUG_STATES) && (bt->state != bt->last_state)) + if ((bt_debug & BT_DEBUG_STATES) && (bt->state != last_printed)) { printk(KERN_WARNING "BT: %s %s TO=%ld - %ld \n", STATE2TXT, - STATUS2TXT(buf), + STATUS2TXT, bt->timeout, time); - bt->last_state = bt->state; + last_printed = bt->state; + } - if (bt->state == BT_STATE_HOSED) - return SI_SM_HOSED; + /* Commands that time out may still (eventually) provide a response. + This stale response will get in the way of a new response so remove + it if possible (hopefully during IDLE). Even if it comes up later + it will be rejected by its (now-forgotten) seq number. */ + + if ((bt->state < BT_STATE_WRITE_BYTES) && (status & BT_B2H_ATN)) { + drain_BMC2HOST(bt); + BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); + } - if (bt->state != BT_STATE_IDLE) { /* do timeout test */ + if ((bt->state != BT_STATE_IDLE) && + (bt->state < BT_STATE_PRINTME)) { /* check timeout */ bt->timeout -= time; - if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1)) { - error_recovery(bt, "timed out"); - return SI_SM_CALL_WITHOUT_DELAY; - } + if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1)) + return error_recovery(bt, + status, + IPMI_TIMEOUT_ERR); } switch (bt->state) { - case BT_STATE_IDLE: /* check for asynchronous messages */ + /* Idle state first checks for asynchronous messages from another + channel, then does some opportunistic housekeeping. */ + + case BT_STATE_IDLE: if (status & BT_SMS_ATN) { BT_CONTROL(BT_SMS_ATN); /* clear it */ return SI_SM_ATTN; } - return SI_SM_IDLE; - case BT_STATE_XACTION_START: - if (status & BT_H_BUSY) { + if (status & BT_H_BUSY) /* clear a leftover H_BUSY */ BT_CONTROL(BT_H_BUSY); - break; - } - if (status & BT_B2H_ATN) - break; - bt->state = BT_STATE_WRITE_BYTES; - return SI_SM_CALL_WITHOUT_DELAY; /* for logging */ - case BT_STATE_WRITE_BYTES: + /* Read BT capabilities if it hasn't been done yet */ + if (!bt->BT_CAP_outreqs) + BT_STATE_CHANGE(BT_STATE_CAPABILITIES_BEGIN, + SI_SM_CALL_WITHOUT_DELAY); + bt->timeout = bt->BT_CAP_req2rsp; + BT_SI_SM_RETURN(SI_SM_IDLE); + + case BT_STATE_XACTION_START: if (status & (BT_B_BUSY | BT_H2B_ATN)) - break; + BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); + if (BT_STATUS & BT_H_BUSY) + BT_CONTROL(BT_H_BUSY); /* force clear */ + BT_STATE_CHANGE(BT_STATE_WRITE_BYTES, + SI_SM_CALL_WITHOUT_DELAY); + + case BT_STATE_WRITE_BYTES: + if (status & BT_H_BUSY) + BT_CONTROL(BT_H_BUSY); /* clear */ BT_CONTROL(BT_CLR_WR_PTR); write_all_bytes(bt); - BT_CONTROL(BT_H2B_ATN); /* clears too fast to catch? */ - bt->state = BT_STATE_WRITE_CONSUME; - return SI_SM_CALL_WITHOUT_DELAY; /* it MIGHT sail through */ - - case BT_STATE_WRITE_CONSUME: /* BMCs usually blow right thru here */ - if (status & (BT_H2B_ATN | BT_B_BUSY)) - break; - bt->state = BT_STATE_B2H_WAIT; - /* fall through with status */ - - /* Stay in BT_STATE_B2H_WAIT until a packet matches. However, spinning - hard here, constantly reading status, seems to hold off the - generation of B2H_ATN so ALWAYS return CALL_WITH_DELAY. */ - - case BT_STATE_B2H_WAIT: - if (!(status & BT_B2H_ATN)) - break; - - /* Assume ordered, uncached writes: no need to wait */ - if (!(status & BT_H_BUSY)) - BT_CONTROL(BT_H_BUSY); /* set */ - BT_CONTROL(BT_B2H_ATN); /* clear it, ACK to the BMC */ - BT_CONTROL(BT_CLR_RD_PTR); /* reset the queue */ - i = read_all_bytes(bt); - BT_CONTROL(BT_H_BUSY); /* clear */ - if (!i) /* Try this state again */ - break; - bt->state = BT_STATE_READ_END; - return SI_SM_CALL_WITHOUT_DELAY; /* for logging */ - - case BT_STATE_READ_END: - - /* I could wait on BT_H_BUSY to go clear for a truly clean - exit. However, this is already done in XACTION_START - and the (possible) extra loop/status/possible wait affects - performance. So, as long as it works, just ignore H_BUSY */ - -#ifdef MAKE_THIS_TRUE_IF_NECESSARY + BT_CONTROL(BT_H2B_ATN); /* can clear too fast to catch */ + BT_STATE_CHANGE(BT_STATE_WRITE_CONSUME, + SI_SM_CALL_WITHOUT_DELAY); - if (status & BT_H_BUSY) - break; -#endif - bt->seq++; - bt->state = BT_STATE_IDLE; - return SI_SM_TRANSACTION_COMPLETE; + case BT_STATE_WRITE_CONSUME: + if (status & (BT_B_BUSY | BT_H2B_ATN)) + BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); + BT_STATE_CHANGE(BT_STATE_READ_WAIT, + SI_SM_CALL_WITHOUT_DELAY); + + /* Spinning hard can suppress B2H_ATN and force a timeout */ + + case BT_STATE_READ_WAIT: + if (!(status & BT_B2H_ATN)) + BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); + BT_CONTROL(BT_H_BUSY); /* set */ + + /* Uncached, ordered writes should just proceeed serially but + some BMCs don't clear B2H_ATN with one hit. Fast-path a + workaround without too much penalty to the general case. */ + + BT_CONTROL(BT_B2H_ATN); /* clear it to ACK the BMC */ + BT_STATE_CHANGE(BT_STATE_CLEAR_B2H, + SI_SM_CALL_WITHOUT_DELAY); + + case BT_STATE_CLEAR_B2H: + if (status & BT_B2H_ATN) { /* keep hitting it */ + BT_CONTROL(BT_B2H_ATN); + BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); + } + BT_STATE_CHANGE(BT_STATE_READ_BYTES, + SI_SM_CALL_WITHOUT_DELAY); + + case BT_STATE_READ_BYTES: + if (!(status & BT_H_BUSY)) /* check in case of retry */ + BT_CONTROL(BT_H_BUSY); + BT_CONTROL(BT_CLR_RD_PTR); /* start of BMC2HOST buffer */ + i = read_all_bytes(bt); /* true == packet seq match */ + BT_CONTROL(BT_H_BUSY); /* NOW clear */ + if (!i) /* Not my message */ + BT_STATE_CHANGE(BT_STATE_READ_WAIT, + SI_SM_CALL_WITHOUT_DELAY); + bt->state = bt->complete; + return bt->state == BT_STATE_IDLE ? /* where to next? */ + SI_SM_TRANSACTION_COMPLETE : /* normal */ + SI_SM_CALL_WITHOUT_DELAY; /* Startup magic */ + + case BT_STATE_LONG_BUSY: /* For example: after FW update */ + if (!(status & BT_B_BUSY)) { + reset_flags(bt); /* next state is now IDLE */ + bt_init_data(bt, bt->io); + } + return SI_SM_CALL_WITH_DELAY; /* No repeat printing */ case BT_STATE_RESET1: - reset_flags(bt); - bt->timeout = BT_RESET_DELAY; - bt->state = BT_STATE_RESET2; - break; + reset_flags(bt); + drain_BMC2HOST(bt); + BT_STATE_CHANGE(BT_STATE_RESET2, + SI_SM_CALL_WITH_DELAY); case BT_STATE_RESET2: /* Send a soft reset */ BT_CONTROL(BT_CLR_WR_PTR); @@ -464,29 +579,59 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) HOST2BMC(42); /* Sequence number */ HOST2BMC(3); /* Cmd == Soft reset */ BT_CONTROL(BT_H2B_ATN); - bt->state = BT_STATE_RESET3; - break; + bt->timeout = BT_RESET_DELAY * 1000000; + BT_STATE_CHANGE(BT_STATE_RESET3, + SI_SM_CALL_WITH_DELAY); - case BT_STATE_RESET3: + case BT_STATE_RESET3: /* Hold off everything for a bit */ if (bt->timeout > 0) - return SI_SM_CALL_WITH_DELAY; - bt->state = BT_STATE_RESTART; /* printk in debug modes */ - break; + return SI_SM_CALL_WITH_DELAY; + drain_BMC2HOST(bt); + BT_STATE_CHANGE(BT_STATE_RESTART, + SI_SM_CALL_WITH_DELAY); - case BT_STATE_RESTART: /* don't reset retries! */ - reset_flags(bt); - bt->write_data[2] = ++bt->seq; + case BT_STATE_RESTART: /* don't reset retries or seq! */ bt->read_count = 0; bt->nonzero_status = 0; - bt->timeout = BT_NORMAL_TIMEOUT; - bt->state = BT_STATE_XACTION_START; - break; - - default: /* HOSED is supposed to be caught much earlier */ - error_recovery(bt, "internal logic error"); - break; - } - return SI_SM_CALL_WITH_DELAY; + bt->timeout = bt->BT_CAP_req2rsp; + BT_STATE_CHANGE(BT_STATE_XACTION_START, + SI_SM_CALL_WITH_DELAY); + + /* Get BT Capabilities, using timing of upper level state machine. + Set outreqs to prevent infinite loop on timeout. */ + case BT_STATE_CAPABILITIES_BEGIN: + bt->BT_CAP_outreqs = 1; + { + unsigned char GetBT_CAP[] = { 0x18, 0x36 }; + bt->state = BT_STATE_IDLE; + bt_start_transaction(bt, GetBT_CAP, sizeof(GetBT_CAP)); + } + bt->complete = BT_STATE_CAPABILITIES_END; + BT_STATE_CHANGE(BT_STATE_XACTION_START, + SI_SM_CALL_WITH_DELAY); + + case BT_STATE_CAPABILITIES_END: + i = bt_get_result(bt, BT_CAP, sizeof(BT_CAP)); + bt_init_data(bt, bt->io); + if ((i == 8) && !BT_CAP[2]) { + bt->BT_CAP_outreqs = BT_CAP[3]; + bt->BT_CAP_req2rsp = BT_CAP[6] * 1000000; + bt->BT_CAP_retries = BT_CAP[7]; + } else + printk(KERN_WARNING "IPMI BT: using default values\n"); + if (!bt->BT_CAP_outreqs) + bt->BT_CAP_outreqs = 1; + printk(KERN_WARNING "IPMI BT: req2rsp=%ld secs retries=%d\n", + bt->BT_CAP_req2rsp / 1000000L, bt->BT_CAP_retries); + bt->timeout = bt->BT_CAP_req2rsp; + return SI_SM_CALL_WITHOUT_DELAY; + + default: /* should never occur */ + return error_recovery(bt, + status, + IPMI_ERR_UNSPECIFIED); + } + return SI_SM_CALL_WITH_DELAY; } static int bt_detect(struct si_sm_data *bt) @@ -497,7 +642,7 @@ static int bt_detect(struct si_sm_data *bt) test that first. The calling routine uses negative logic. */ if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF)) - return 1; + return 1; reset_flags(bt); return 0; } @@ -513,11 +658,11 @@ static int bt_size(void) struct si_sm_handlers bt_smi_handlers = { - .init_data = bt_init_data, - .start_transaction = bt_start_transaction, - .get_result = bt_get_result, - .event = bt_event, - .detect = bt_detect, - .cleanup = bt_cleanup, - .size = bt_size, + .init_data = bt_init_data, + .start_transaction = bt_start_transaction, + .get_result = bt_get_result, + .event = bt_event, + .detect = bt_detect, + .cleanup = bt_cleanup, + .size = bt_size, }; diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c index 2062675f9e9..fb46979567e 100644 --- a/drivers/char/ipmi/ipmi_kcs_sm.c +++ b/drivers/char/ipmi/ipmi_kcs_sm.c @@ -261,12 +261,14 @@ static int start_kcs_transaction(struct si_sm_data *kcs, unsigned char *data, { unsigned int i; - if ((size < 2) || (size > MAX_KCS_WRITE_SIZE)) { - return -1; - } - if ((kcs->state != KCS_IDLE) && (kcs->state != KCS_HOSED)) { - return -2; - } + if (size < 2) + return IPMI_REQ_LEN_INVALID_ERR; + if (size > MAX_KCS_WRITE_SIZE) + return IPMI_REQ_LEN_EXCEEDED_ERR; + + if ((kcs->state != KCS_IDLE) && (kcs->state != KCS_HOSED)) + return IPMI_NOT_IN_MY_STATE_ERR; + if (kcs_debug & KCS_DEBUG_MSG) { printk(KERN_DEBUG "start_kcs_transaction -"); for (i = 0; i < size; i ++) { diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index c7de2e86a6d..81a0c89598e 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -247,14 +247,18 @@ static void deliver_recv_msg(struct smi_info *smi_info, spin_lock(&(smi_info->si_lock)); } -static void return_hosed_msg(struct smi_info *smi_info) +static void return_hosed_msg(struct smi_info *smi_info, int cCode) { struct ipmi_smi_msg *msg = smi_info->curr_msg; + if (cCode < 0 || cCode > IPMI_ERR_UNSPECIFIED) + cCode = IPMI_ERR_UNSPECIFIED; + /* else use it as is */ + /* Make it a reponse */ msg->rsp[0] = msg->data[0] | 4; msg->rsp[1] = msg->data[1]; - msg->rsp[2] = IPMI_ERR_UNSPECIFIED; + msg->rsp[2] = cCode; msg->rsp_size = 3; smi_info->curr_msg = NULL; @@ -305,7 +309,7 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) smi_info->curr_msg->data, smi_info->curr_msg->data_size); if (err) { - return_hosed_msg(smi_info); + return_hosed_msg(smi_info, err); } rv = SI_SM_CALL_WITHOUT_DELAY; @@ -647,7 +651,7 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info, /* If we were handling a user message, format a response to send to the upper layer to tell it about the error. */ - return_hosed_msg(smi_info); + return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED); } si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); } diff --git a/drivers/char/ipmi/ipmi_smic_sm.c b/drivers/char/ipmi/ipmi_smic_sm.c index 39d7e5ef1a2..e64ea7d25d2 100644 --- a/drivers/char/ipmi/ipmi_smic_sm.c +++ b/drivers/char/ipmi/ipmi_smic_sm.c @@ -141,12 +141,14 @@ static int start_smic_transaction(struct si_sm_data *smic, { unsigned int i; - if ((size < 2) || (size > MAX_SMIC_WRITE_SIZE)) { - return -1; - } - if ((smic->state != SMIC_IDLE) && (smic->state != SMIC_HOSED)) { - return -2; - } + if (size < 2) + return IPMI_REQ_LEN_INVALID_ERR; + if (size > MAX_SMIC_WRITE_SIZE) + return IPMI_REQ_LEN_EXCEEDED_ERR; + + if ((smic->state != SMIC_IDLE) && (smic->state != SMIC_HOSED)) + return IPMI_NOT_IN_MY_STATE_ERR; + if (smic_debug & SMIC_DEBUG_MSG) { printk(KERN_INFO "start_smic_transaction -"); for (i = 0; i < size; i ++) { |