diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/clk/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clk/clk-nomadik.c | 47 |
2 files changed, 48 insertions, 0 deletions
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index b9a5158a30b..26b6b92942e 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -3,5 +3,6 @@ obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o # SoCs specific +obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_MXS) += mxs/ obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c new file mode 100644 index 00000000000..517a8ff7121 --- /dev/null +++ b/drivers/clk/clk-nomadik.c @@ -0,0 +1,47 @@ +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk-provider.h> + +/* + * The Nomadik clock tree is described in the STN8815A12 DB V4.2 + * reference manual for the chip, page 94 ff. + */ + +void __init nomadik_clk_init(void) +{ + struct clk *clk; + + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + clk_register_clkdev(clk, NULL, "gpio.0"); + clk_register_clkdev(clk, NULL, "gpio.1"); + clk_register_clkdev(clk, NULL, "gpio.2"); + clk_register_clkdev(clk, NULL, "gpio.3"); + clk_register_clkdev(clk, NULL, "rng"); + + /* + * The 2.4 MHz TIMCLK reference clock is active at boot time, this is + * actually the MXTALCLK @19.2 MHz divided by 8. This clock is used + * by the timers and watchdog. See page 105 ff. + */ + clk = clk_register_fixed_rate(NULL, "TIMCLK", NULL, CLK_IS_ROOT, + 2400000); + clk_register_clkdev(clk, NULL, "mtu0"); + clk_register_clkdev(clk, NULL, "mtu1"); + + /* + * At boot time, PLL2 is set to generate a set of fixed clocks, + * one of them is CLK48, the 48 MHz clock, routed to the UART, MMC/SD + * I2C, IrDA, USB and SSP blocks. + */ + clk = clk_register_fixed_rate(NULL, "CLK48", NULL, CLK_IS_ROOT, + 48000000); + clk_register_clkdev(clk, NULL, "uart0"); + clk_register_clkdev(clk, NULL, "uart1"); + clk_register_clkdev(clk, NULL, "mmci"); + clk_register_clkdev(clk, NULL, "ssp"); + clk_register_clkdev(clk, NULL, "nmk-i2c.0"); + clk_register_clkdev(clk, NULL, "nmk-i2c.1"); +} |