summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c227
-rw-r--r--drivers/serial/8250_pci.c134
-rw-r--r--drivers/serial/Kconfig44
-rw-r--r--drivers/serial/Makefile3
-rw-r--r--drivers/serial/amba-pl010.c2
-rw-r--r--drivers/serial/amba-pl011.c2
-rw-r--r--drivers/serial/bfin_5xx.c239
-rw-r--r--drivers/serial/bfin_sport_uart.c60
-rw-r--r--drivers/serial/crisv10.c4
-rw-r--r--drivers/serial/imx.c8
-rw-r--r--drivers/serial/jsm/jsm_tty.c2
-rw-r--r--drivers/serial/mpc52xx_uart.c74
-rw-r--r--drivers/serial/nwpserial.c475
-rw-r--r--drivers/serial/of_serial.c19
-rw-r--r--drivers/serial/pmac_zilog.c27
-rw-r--r--drivers/serial/pxa.c3
-rw-r--r--drivers/serial/s3c24a0.c118
-rw-r--r--drivers/serial/s3c6400.c151
-rw-r--r--drivers/serial/samsung.c184
-rw-r--r--drivers/serial/samsung.h9
-rw-r--r--drivers/serial/serial_core.c159
-rw-r--r--drivers/serial/serial_lh7a40x.c3
-rw-r--r--drivers/serial/sh-sci.c563
-rw-r--r--drivers/serial/sh-sci.h45
24 files changed, 1734 insertions, 821 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 303272af386..1889a63ebc2 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -279,6 +279,13 @@ static const struct serial8250_config uart_config[] = {
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO,
},
+ [PORT_OCTEON] = {
+ .name = "OCTEON",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO,
+ },
};
#if defined (CONFIG_SERIAL_8250_AU1X00)
@@ -303,16 +310,16 @@ static const u8 au_io_out_map[] = {
};
/* sane hardware needs no mapping */
-static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
+static inline int map_8250_in_reg(struct uart_port *p, int offset)
{
- if (up->port.iotype != UPIO_AU)
+ if (p->iotype != UPIO_AU)
return offset;
return au_io_in_map[offset];
}
-static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
+static inline int map_8250_out_reg(struct uart_port *p, int offset)
{
- if (up->port.iotype != UPIO_AU)
+ if (p->iotype != UPIO_AU)
return offset;
return au_io_out_map[offset];
}
@@ -341,16 +348,16 @@ static const u8
[UART_SCR] = 0x2c
};
-static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
+static inline int map_8250_in_reg(struct uart_port *p, int offset)
{
- if (up->port.iotype != UPIO_RM9000)
+ if (p->iotype != UPIO_RM9000)
return offset;
return regmap_in[offset];
}
-static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
+static inline int map_8250_out_reg(struct uart_port *p, int offset)
{
- if (up->port.iotype != UPIO_RM9000)
+ if (p->iotype != UPIO_RM9000)
return offset;
return regmap_out[offset];
}
@@ -363,108 +370,170 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
#endif
-static unsigned int serial_in(struct uart_8250_port *up, int offset)
+static unsigned int hub6_serial_in(struct uart_port *p, int offset)
{
- unsigned int tmp;
- offset = map_8250_in_reg(up, offset) << up->port.regshift;
+ offset = map_8250_in_reg(p, offset) << p->regshift;
+ outb(p->hub6 - 1 + offset, p->iobase);
+ return inb(p->iobase + 1);
+}
- switch (up->port.iotype) {
- case UPIO_HUB6:
- outb(up->port.hub6 - 1 + offset, up->port.iobase);
- return inb(up->port.iobase + 1);
+static void hub6_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ outb(p->hub6 - 1 + offset, p->iobase);
+ outb(value, p->iobase + 1);
+}
- case UPIO_MEM:
- case UPIO_DWAPB:
- return readb(up->port.membase + offset);
+static unsigned int mem_serial_in(struct uart_port *p, int offset)
+{
+ offset = map_8250_in_reg(p, offset) << p->regshift;
+ return readb(p->membase + offset);
+}
- case UPIO_RM9000:
- case UPIO_MEM32:
- return readl(up->port.membase + offset);
+static void mem_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ writeb(value, p->membase + offset);
+}
+
+static void mem32_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ writel(value, p->membase + offset);
+}
+
+static unsigned int mem32_serial_in(struct uart_port *p, int offset)
+{
+ offset = map_8250_in_reg(p, offset) << p->regshift;
+ return readl(p->membase + offset);
+}
#ifdef CONFIG_SERIAL_8250_AU1X00
- case UPIO_AU:
- return __raw_readl(up->port.membase + offset);
+static unsigned int au_serial_in(struct uart_port *p, int offset)
+{
+ offset = map_8250_in_reg(p, offset) << p->regshift;
+ return __raw_readl(p->membase + offset);
+}
+
+static void au_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ __raw_writel(value, p->membase + offset);
+}
#endif
- case UPIO_TSI:
- if (offset == UART_IIR) {
- tmp = readl(up->port.membase + (UART_IIR & ~3));
- return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
- } else
- return readb(up->port.membase + offset);
+static unsigned int tsi_serial_in(struct uart_port *p, int offset)
+{
+ unsigned int tmp;
+ offset = map_8250_in_reg(p, offset) << p->regshift;
+ if (offset == UART_IIR) {
+ tmp = readl(p->membase + (UART_IIR & ~3));
+ return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
+ } else
+ return readb(p->membase + offset);
+}
- default:
- return inb(up->port.iobase + offset);
- }
+static void tsi_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+ writeb(value, p->membase + offset);
}
-static void
-serial_out(struct uart_8250_port *up, int offset, int value)
+static void dwapb_serial_out(struct uart_port *p, int offset, int value)
{
- /* Save the offset before it's remapped */
int save_offset = offset;
- offset = map_8250_out_reg(up, offset) << up->port.regshift;
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ /* Save the LCR value so it can be re-written when a
+ * Busy Detect interrupt occurs. */
+ if (save_offset == UART_LCR) {
+ struct uart_8250_port *up = (struct uart_8250_port *)p;
+ up->lcr = value;
+ }
+ writeb(value, p->membase + offset);
+ /* Read the IER to ensure any interrupt is cleared before
+ * returning from ISR. */
+ if (save_offset == UART_TX || save_offset == UART_IER)
+ value = p->serial_in(p, UART_IER);
+}
- switch (up->port.iotype) {
+static unsigned int io_serial_in(struct uart_port *p, int offset)
+{
+ offset = map_8250_in_reg(p, offset) << p->regshift;
+ return inb(p->iobase + offset);
+}
+
+static void io_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+ outb(value, p->iobase + offset);
+}
+
+static void set_io_from_upio(struct uart_port *p)
+{
+ switch (p->iotype) {
case UPIO_HUB6:
- outb(up->port.hub6 - 1 + offset, up->port.iobase);
- outb(value, up->port.iobase + 1);
+ p->serial_in = hub6_serial_in;
+ p->serial_out = hub6_serial_out;
break;
case UPIO_MEM:
- writeb(value, up->port.membase + offset);
+ p->serial_in = mem_serial_in;
+ p->serial_out = mem_serial_out;
break;
case UPIO_RM9000:
case UPIO_MEM32:
- writel(value, up->port.membase + offset);
+ p->serial_in = mem32_serial_in;
+ p->serial_out = mem32_serial_out;
break;
#ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU:
- __raw_writel(value, up->port.membase + offset);
+ p->serial_in = au_serial_in;
+ p->serial_out = au_serial_out;
break;
#endif
case UPIO_TSI:
- if (!((offset == UART_IER) && (value & UART_IER_UUE)))
- writeb(value, up->port.membase + offset);
+ p->serial_in = tsi_serial_in;
+ p->serial_out = tsi_serial_out;
break;
case UPIO_DWAPB:
- /* Save the LCR value so it can be re-written when a
- * Busy Detect interrupt occurs. */
- if (save_offset == UART_LCR)
- up->lcr = value;
- writeb(value, up->port.membase + offset);
- /* Read the IER to ensure any interrupt is cleared before
- * returning from ISR. */
- if (save_offset == UART_TX || save_offset == UART_IER)
- value = serial_in(up, UART_IER);
+ p->serial_in = mem_serial_in;
+ p->serial_out = dwapb_serial_out;
break;
default:
- outb(value, up->port.iobase + offset);
+ p->serial_in = io_serial_in;
+ p->serial_out = io_serial_out;
+ break;
}
}
static void
serial_out_sync(struct uart_8250_port *up, int offset, int value)
{
- switch (up->port.iotype) {
+ struct uart_port *p = &up->port;
+ switch (p->iotype) {
case UPIO_MEM:
case UPIO_MEM32:
#ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU:
#endif
case UPIO_DWAPB:
- serial_out(up, offset, value);
- serial_in(up, UART_LCR); /* safe, no side-effects */
+ p->serial_out(p, offset, value);
+ p->serial_in(p, UART_LCR); /* safe, no side-effects */
break;
default:
- serial_out(up, offset, value);
+ p->serial_out(p, offset, value);
}
}
+#define serial_in(up, offset) \
+ (up->port.serial_in(&(up)->port, (offset)))
+#define serial_out(up, offset, value) \
+ (up->port.serial_out(&(up)->port, (offset), (value)))
/*
* We used to support using pause I/O for certain machines. We
* haven't supported this for a while, but just in case it's badly
@@ -2576,6 +2645,7 @@ static void __init serial8250_isa_init_ports(void)
up->port.membase = old_serial_port[i].iomem_base;
up->port.iotype = old_serial_port[i].io_type;
up->port.regshift = old_serial_port[i].iomem_reg_shift;
+ set_io_from_upio(&up->port);
if (share_irqs)
up->port.flags |= UPF_SHARE_IRQ;
}
@@ -2752,12 +2822,30 @@ static struct uart_driver serial8250_reg = {
*/
int __init early_serial_setup(struct uart_port *port)
{
+ struct uart_port *p;
+
if (port->line >= ARRAY_SIZE(serial8250_ports))
return -ENODEV;
serial8250_isa_init_ports();
- serial8250_ports[port->line].port = *port;
- serial8250_ports[port->line].port.ops = &serial8250_pops;
+ p = &serial8250_ports[port->line].port;
+ p->iobase = port->iobase;
+ p->membase = port->membase;
+ p->irq = port->irq;
+ p->uartclk = port->uartclk;
+ p->fifosize = port->fifosize;
+ p->regshift = port->regshift;
+ p->iotype = port->iotype;
+ p->flags = port->flags;
+ p->mapbase = port->mapbase;
+ p->private_data = port->private_data;
+
+ set_io_from_upio(p);
+ if (port->serial_in)
+ p->serial_in = port->serial_in;
+ if (port->serial_out)
+ p->serial_out = port->serial_out;
+
return 0;
}
@@ -2822,6 +2910,9 @@ static int __devinit serial8250_probe(struct platform_device *dev)
port.mapbase = p->mapbase;
port.hub6 = p->hub6;
port.private_data = p->private_data;
+ port.type = p->type;
+ port.serial_in = p->serial_in;
+ port.serial_out = p->serial_out;
port.dev = &dev->dev;
if (share_irqs)
port.flags |= UPF_SHARE_IRQ;
@@ -2976,6 +3067,20 @@ int serial8250_register_port(struct uart_port *port)
if (port->dev)
uart->port.dev = port->dev;
+ if (port->flags & UPF_FIXED_TYPE) {
+ uart->port.type = port->type;
+ uart->port.fifosize = uart_config[port->type].fifo_size;
+ uart->capabilities = uart_config[port->type].flags;
+ uart->tx_loadsz = uart_config[port->type].tx_loadsz;
+ }
+
+ set_io_from_upio(&uart->port);
+ /* Possibly override default I/O functions. */
+ if (port->serial_in)
+ uart->port.serial_in = port->serial_in;
+ if (port->serial_out)
+ uart->port.serial_out = port->serial_out;
+
ret = uart_add_one_port(&serial8250_reg, &uart->port);
if (ret == 0)
ret = uart->port.line;
@@ -3018,7 +3123,7 @@ static int __init serial8250_init(void)
if (nr_uarts > UART_NR)
nr_uarts = UART_NR;
- printk(KERN_INFO "Serial: 8250/16550 driver"
+ printk(KERN_INFO "Serial: 8250/16550 driver, "
"%d ports, IRQ sharing %sabled\n", nr_uarts,
share_irqs ? "en" : "dis");
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 5450a0e5ecd..c088146b751 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -42,7 +42,8 @@ struct pci_serial_quirk {
u32 subvendor;
u32 subdevice;
int (*init)(struct pci_dev *dev);
- int (*setup)(struct serial_private *, struct pciserial_board *,
+ int (*setup)(struct serial_private *,
+ const struct pciserial_board *,
struct uart_port *, int);
void (*exit)(struct pci_dev *dev);
};
@@ -107,7 +108,7 @@ setup_port(struct serial_private *priv, struct uart_port *port,
* ADDI-DATA GmbH communication cards <info@addi-data.com>
*/
static int addidata_apci7800_setup(struct serial_private *priv,
- struct pciserial_board *board,
+ const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar = 0, offset = board->first_offset;
@@ -134,7 +135,7 @@ static int addidata_apci7800_setup(struct serial_private *priv,
* Not that ugly ;) -- HW
*/
static int
-afavlab_setup(struct serial_private *priv, struct pciserial_board *board,
+afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
@@ -188,8 +189,9 @@ static int pci_hp_diva_init(struct pci_dev *dev)
* some serial ports are supposed to be hidden on certain models.
*/
static int
-pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board,
- struct uart_port *port, int idx)
+pci_hp_diva_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
{
unsigned int offset = board->first_offset;
unsigned int bar = FL_GET_BASE(board->flags);
@@ -306,7 +308,7 @@ static void __devexit pci_plx9050_exit(struct pci_dev *dev)
/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
static int
-sbs_setup(struct serial_private *priv, struct pciserial_board *board,
+sbs_setup(struct serial_private *priv, const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
@@ -463,7 +465,7 @@ static int pci_siig_init(struct pci_dev *dev)
}
static int pci_siig_setup(struct serial_private *priv,
- struct pciserial_board *board,
+ const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
@@ -534,7 +536,8 @@ static int pci_timedia_init(struct pci_dev *dev)
* Ugh, this is ugly as all hell --- TYT
*/
static int
-pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board,
+pci_timedia_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar = 0, offset = board->first_offset;
@@ -568,7 +571,7 @@ pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board,
*/
static int
titan_400l_800l_setup(struct serial_private *priv,
- struct pciserial_board *board,
+ const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
@@ -737,8 +740,41 @@ static void __devexit pci_ite887x_exit(struct pci_dev *dev)
release_region(ioport, ITE_887x_IOSIZE);
}
+/*
+ * Oxford Semiconductor Inc.
+ * Check that device is part of the Tornado range of devices, then determine
+ * the number of ports available on the device.
+ */
+static int pci_oxsemi_tornado_init(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+ unsigned long deviceID;
+ unsigned int number_uarts = 0;
+
+ /* OxSemi Tornado devices are all 0xCxxx */
+ if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
+ (dev->device & 0xF000) != 0xC000)
+ return 0;
+
+ p = pci_iomap(dev, 0, 5);
+ if (p == NULL)
+ return -ENOMEM;
+
+ deviceID = ioread32(p);
+ /* Tornado device */
+ if (deviceID == 0x07000200) {
+ number_uarts = ioread8(p + 4);
+ printk(KERN_DEBUG
+ "%d ports detected on Oxford PCI Express device\n",
+ number_uarts);
+ }
+ pci_iounmap(dev, p);
+ return number_uarts;
+}
+
static int
-pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
+pci_default_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar, offset = board->first_offset, maxnr;
@@ -1018,6 +1054,25 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_default_setup,
},
/*
+ * For Oxford Semiconductor and Mainpine
+ */
+ {
+ .vendor = PCI_VENDOR_ID_OXSEMI,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_MAINPINE,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_default_setup,
+ },
+ /*
* Default "match everything" terminator entry
*/
{
@@ -1048,7 +1103,7 @@ static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
}
static inline int get_pci_irq(struct pci_dev *dev,
- struct pciserial_board *board)
+ const struct pciserial_board *board)
{
if (board->flags & FL_NOIRQ)
return 0;
@@ -1843,8 +1898,8 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
}
static inline int
-serial_pci_matches(struct pciserial_board *board,
- struct pciserial_board *guessed)
+serial_pci_matches(const struct pciserial_board *board,
+ const struct pciserial_board *guessed)
{
return
board->num_ports == guessed->num_ports &&
@@ -1854,54 +1909,14 @@ serial_pci_matches(struct pciserial_board *board,
board->first_offset == guessed->first_offset;
}
-/*
- * Oxford Semiconductor Inc.
- * Check that device is part of the Tornado range of devices, then determine
- * the number of ports available on the device.
- */
-static int pci_oxsemi_tornado_init(struct pci_dev *dev, struct pciserial_board *board)
-{
- u8 __iomem *p;
- unsigned long deviceID;
- unsigned int number_uarts;
-
- /* OxSemi Tornado devices are all 0xCxxx */
- if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
- (dev->device & 0xF000) != 0xC000)
- return 0;
-
- p = pci_iomap(dev, 0, 5);
- if (p == NULL)
- return -ENOMEM;
-
- deviceID = ioread32(p);
- /* Tornado device */
- if (deviceID == 0x07000200) {
- number_uarts = ioread8(p + 4);
- board->num_ports = number_uarts;
- printk(KERN_DEBUG
- "%d ports detected on Oxford PCI Express device\n",
- number_uarts);
- }
- pci_iounmap(dev, p);
- return 0;
-}
-
struct serial_private *
-pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
+pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
{
struct uart_port serial_port;
struct serial_private *priv;
struct pci_serial_quirk *quirk;
int rc, nr_ports, i;
- /*
- * Find number of ports on board
- */
- if (dev->vendor == PCI_VENDOR_ID_OXSEMI ||
- dev->vendor == PCI_VENDOR_ID_MAINPINE)
- pci_oxsemi_tornado_init(dev, board);
-
nr_ports = board->num_ports;
/*
@@ -2028,7 +2043,8 @@ static int __devinit
pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
{
struct serial_private *priv;
- struct pciserial_board *board, tmp;
+ const struct pciserial_board *board;
+ struct pciserial_board tmp;
int rc;
if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
@@ -2055,7 +2071,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
* We matched one of our class entries. Try to
* determine the parameters of this board.
*/
- rc = serial_pci_guess_board(dev, board);
+ rc = serial_pci_guess_board(dev, &tmp);
if (rc)
goto disable;
} else {
@@ -2271,6 +2287,9 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_8_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_8_460800 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_8_115200 },
@@ -2372,6 +2391,9 @@ static struct pci_device_id serial_pci_tbl[] = {
* For now just used the hex ID 0x950a.
*/
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
+ PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0,
+ pbn_b0_2_115200 },
+ { PCI_VENDOR_ID_OXSEMI, 0x950a,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_2_1130000 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 579d63a81aa..3e525e38a5d 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
- depends on ARM && PLAT_S3C24XX
+ depends on ARM && PLAT_S3C
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,6 +455,16 @@ config SERIAL_SAMSUNG
provide all of these ports, depending on how the serial port
pins are configured.
+config SERIAL_SAMSUNG_UARTS
+ int
+ depends on ARM && PLAT_S3C
+ default 2 if ARCH_S3C2400
+ default 4 if ARCH_S3C64XX || CPU_S3C2443
+ default 3
+ help
+ Select the number of available UART ports for the Samsung S3C
+ serial driver
+
config SERIAL_SAMSUNG_DEBUG
bool "Samsung SoC serial debug"
depends on SERIAL_SAMSUNG && DEBUG_LL
@@ -508,7 +518,20 @@ config SERIAL_S3C2440
help
Serial port support for the Samsung S3C2440 and S3C2442 SoC
+config SERIAL_S3C24A0
+ tristate "Samsung S3C24A0 Serial port support"
+ depends on SERIAL_SAMSUNG && CPU_S3C24A0
+ default y if CPU_S3C24A0
+ help
+ Serial port support for the Samsung S3C24A0 SoC
+config SERIAL_S3C6400
+ tristate "Samsung S3C6400/S3C6410 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410)
+ default y
+ help
+ Serial port support for the Samsung S3C6400 and S3C6410
+ SoCs
config SERIAL_DZ
bool "DECstation DZ serial driver"
@@ -1297,13 +1320,30 @@ config SERIAL_NETX_CONSOLE
config SERIAL_OF_PLATFORM
tristate "Serial port on Open Firmware platform bus"
depends on PPC_OF
- depends on SERIAL_8250
+ depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
help
If you have a PowerPC based system that has serial ports
on a platform specific bus, you should enable this option.
Currently, only 8250 compatible ports are supported, but
others can easily be added.
+config SERIAL_OF_PLATFORM_NWPSERIAL
+ tristate "NWP serial port driver"
+ depends on PPC_OF && PPC_DCR
+ select SERIAL_OF_PLATFORM
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_CORE
+ help
+ This driver supports the cell network processor nwp serial
+ device.
+
+config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
+ bool "Console on NWP serial port"
+ depends on SERIAL_OF_PLATFORM_NWPSERIAL=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Support for Console on the NWP serial ports.
+
config SERIAL_QE
tristate "Freescale QUICC Engine serial port support"
depends on QUICC_ENGINE
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 0c17c8ddb19..8844c0a0392 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -41,6 +41,8 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
+obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
+obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
@@ -70,6 +72,7 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
+obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 71562689116..e3a5ad5ef1d 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -692,7 +692,7 @@ static int pl010_probe(struct amba_device *dev, void *id)
goto free;
}
- uap->clk = clk_get(&dev->dev, "UARTCLK");
+ uap->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(uap->clk)) {
ret = PTR_ERR(uap->clk);
goto unmap;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index b7180046f8d..8b2b9700f3e 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -756,7 +756,7 @@ static int pl011_probe(struct amba_device *dev, void *id)
goto free;
}
- uap->clk = clk_get(&dev->dev, "UARTCLK");
+ uap->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(uap->clk)) {
ret = PTR_ERR(uap->clk);
goto unmap;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 569f0e2476c..318d69dce8e 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -22,7 +22,8 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
-#ifdef CONFIG_KGDB_UART
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
#include <linux/kgdb.h>
#include <asm/irq_regs.h>
#endif
@@ -45,6 +46,16 @@
static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource);
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+
+# ifndef CONFIG_SERIAL_BFIN_PIO
+# error KGDB only support UART in PIO mode.
+# endif
+
+static int kgdboc_port_line;
+static int kgdboc_break_enabled;
+#endif
/*
* Setup for console. Argument comes from the menuconfig
*/
@@ -62,13 +73,17 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);
+static void bfin_serial_reset_irda(struct uart_port *port);
+
/*
* interrupts are disabled on entry
*/
static void bfin_serial_stop_tx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+#ifdef CONFIG_SERIAL_BFIN_DMA
struct circ_buf *xmit = &uart->port.info->xmit;
+#endif
while (!(UART_GET_LSR(uart) & TEMT))
cpu_relax();
@@ -94,6 +109,14 @@ static void bfin_serial_stop_tx(struct uart_port *port)
static void bfin_serial_start_tx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ struct tty_struct *tty = uart->port.info->port.tty;
+
+ /*
+ * To avoid losting RX interrupt, we reset IR function
+ * before sending data.
+ */
+ if (tty->termios->c_line == N_IRDA)
+ bfin_serial_reset_irda(port);
#ifdef CONFIG_SERIAL_BFIN_DMA
if (uart->tx_done)
@@ -110,9 +133,7 @@ static void bfin_serial_start_tx(struct uart_port *port)
static void bfin_serial_stop_rx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-#ifdef CONFIG_KGDB_UART
- if (uart->port.line != CONFIG_KGDB_UART_PORT)
-#endif
+
UART_CLEAR_IER(uart, ERBFI);
}
@@ -123,49 +144,6 @@ static void bfin_serial_enable_ms(struct uart_port *port)
{
}
-#ifdef CONFIG_KGDB_UART
-static int kgdb_entry_state;
-
-void kgdb_put_debug_char(int chr)
-{
- struct bfin_serial_port *uart;
-
- if (CONFIG_KGDB_UART_PORT < 0
- || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
- uart = &bfin_serial_ports[0];
- else
- uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-
- while (!(UART_GET_LSR(uart) & THRE)) {
- SSYNC();
- }
-
- UART_CLEAR_DLAB(uart);
- UART_PUT_CHAR(uart, (unsigned char)chr);
- SSYNC();
-}
-
-int kgdb_get_debug_char(void)
-{
- struct bfin_serial_port *uart;
- unsigned char chr;
-
- if (CONFIG_KGDB_UART_PORT < 0
- || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
- uart = &bfin_serial_ports[0];
- else
- uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-
- while(!(UART_GET_LSR(uart) & DR)) {
- SSYNC();
- }
- UART_CLEAR_DLAB(uart);
- chr = UART_GET_CHAR(uart);
- SSYNC();
-
- return chr;
-}
-#endif
#if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO)
# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold)
@@ -178,7 +156,7 @@ int kgdb_get_debug_char(void)
#ifdef CONFIG_SERIAL_BFIN_PIO
static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
{
- struct tty_struct *tty = uart->port.info->port.tty;
+ struct tty_struct *tty = NULL;
unsigned int status, ch, flg;
static struct timeval anomaly_start = { .tv_sec = 0 };
@@ -188,27 +166,18 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
ch = UART_GET_CHAR(uart);
uart->port.icount.rx++;
-#ifdef CONFIG_KGDB_UART
- if (uart->port.line == CONFIG_KGDB_UART_PORT) {
- struct pt_regs *regs = get_irq_regs();
- if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */
- kgdb_breakkey_pressed(regs);
- return;
- } else if (kgdb_entry_state == 0 && ch == '$') {/* connection from KGDB */
- kgdb_entry_state = 1;
- } else if (kgdb_entry_state == 1 && ch == 'q') {
- kgdb_entry_state = 0;
- kgdb_breakkey_pressed(regs);
- return;
- } else if (ch == 0x3) {/* Ctrl + C */
- kgdb_entry_state = 0;
- kgdb_breakkey_pressed(regs);
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+ if (kgdb_connected && kgdboc_port_line == uart->port.line)
+ if (ch == 0x3) {/* Ctrl + C */
+ kgdb_breakpoint();
return;
- } else {
- kgdb_entry_state = 0;
}
- }
+
+ if (!uart->port.info || !uart->port.info->tty)
+ return;
#endif
+ tty = uart->port.info->tty;
if (ANOMALY_05000363) {
/* The BF533 (and BF561) family of processors have a nice anomaly
@@ -250,6 +219,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
return;
known_good_char:
+ status &= ~BI;
anomaly_start.tv_sec = 0;
}
}
@@ -445,7 +415,9 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
{
- int x_pos, pos;
+ int x_pos, pos, flags;
+
+ spin_lock_irqsave(&uart->port.lock, flags);
uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
@@ -463,6 +435,8 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
}
+ spin_unlock_irqrestore(&uart->port.lock, flags);
+
mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
}
@@ -497,10 +471,9 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
spin_lock(&uart->port.lock);
irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
clear_dma_irqstat(uart->rx_dma_channel);
+ bfin_serial_dma_rx_chars(uart);
spin_unlock(&uart->port.lock);
- mod_timer(&(uart->rx_dma_timer), jiffies);
-
return IRQ_HANDLED;
}
#endif
@@ -630,16 +603,16 @@ static int bfin_serial_startup(struct uart_port *port)
uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
add_timer(&(uart->rx_dma_timer));
#else
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+ if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled)
+ kgdboc_break_enabled = 0;
+ else {
+# endif
if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
"BFIN_UART_RX", uart)) {
-# ifdef CONFIG_KGDB_UART
- if (uart->port.line != CONFIG_KGDB_UART_PORT) {
-# endif
printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
return -EBUSY;
-# ifdef CONFIG_KGDB_UART
- }
-# endif
}
if (request_irq
@@ -685,6 +658,10 @@ static int bfin_serial_startup(struct uart_port *port)
}
}
# endif
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+ }
+# endif
#endif
UART_SET_IER(uart, ERBFI);
return 0;
@@ -716,9 +693,6 @@ static void bfin_serial_shutdown(struct uart_port *port)
break;
};
#endif
-#ifdef CONFIG_KGDB_UART
- if (uart->port.line != CONFIG_KGDB_UART_PORT)
-#endif
free_irq(uart->port.irq, uart);
free_irq(uart->port.irq+1, uart);
#endif
@@ -887,6 +861,65 @@ static void bfin_serial_set_ldisc(struct uart_port *port)
}
}
+#ifdef CONFIG_CONSOLE_POLL
+static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+
+ while (!(UART_GET_LSR(uart) & THRE))
+ cpu_relax();
+
+ UART_CLEAR_DLAB(uart);
+ UART_PUT_CHAR(uart, (unsigned char)chr);
+}
+
+static int bfin_serial_poll_get_char(struct uart_port *port)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ unsigned char chr;
+
+ while (!(UART_GET_LSR(uart) & DR))
+ cpu_relax();
+
+ UART_CLEAR_DLAB(uart);
+ chr = UART_GET_CHAR(uart);
+
+ return chr;
+}
+#endif
+
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+static void bfin_kgdboc_port_shutdown(struct uart_port *port)
+{
+ if (kgdboc_break_enabled) {
+ kgdboc_break_enabled = 0;
+ bfin_serial_shutdown(port);
+ }
+}
+
+static int bfin_kgdboc_port_startup(struct uart_port *port)
+{
+ kgdboc_port_line = port->line;
+ kgdboc_break_enabled = !bfin_serial_startup(port);
+ return 0;
+}
+#endif
+
+static void bfin_serial_reset_irda(struct uart_port *port)
+{
+ int line = port->line;
+ unsigned short val;
+
+ val = UART_GET_GCTL(&bfin_serial_ports[line]);
+ val &= ~(IREN | RPOLC);
+ UART_PUT_GCTL(&bfin_serial_ports[line], val);
+ SSYNC();
+ val |= (IREN | RPOLC);
+ UART_PUT_GCTL(&bfin_serial_ports[line], val);
+ SSYNC();
+}
+
static struct uart_ops bfin_serial_pops = {
.tx_empty = bfin_serial_tx_empty,
.set_mctrl = bfin_serial_set_mctrl,
@@ -905,6 +938,15 @@ static struct uart_ops bfin_serial_pops = {
.request_port = bfin_serial_request_port,
.config_port = bfin_serial_config_port,
.verify_port = bfin_serial_verify_port,
+#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
+ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
+ .kgdboc_port_startup = bfin_kgdboc_port_startup,
+ .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown,
+#endif
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_put_char = bfin_serial_poll_put_char,
+ .poll_get_char = bfin_serial_poll_get_char,
+#endif
};
static void __init bfin_serial_init_ports(void)
@@ -950,7 +992,7 @@ static void __init bfin_serial_init_ports(void)
}
-#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
/*
* If the port was already initialised (eg, by a boot loader),
* try to determine the current setup.
@@ -994,24 +1036,20 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
}
pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits);
}
-#endif
-#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
static struct uart_driver bfin_serial_reg;
static int __init
bfin_serial_console_setup(struct console *co, char *options)
{
struct bfin_serial_port *uart;
-# ifdef CONFIG_SERIAL_BFIN_CONSOLE
int baud = 57600;
int bits = 8;
int parity = 'n';
-# ifdef CONFIG_SERIAL_BFIN_CTSRTS
+# ifdef CONFIG_SERIAL_BFIN_CTSRTS
int flow = 'r';
-# else
+# else
int flow = 'n';
-# endif
# endif
/*
@@ -1023,16 +1061,12 @@ bfin_serial_console_setup(struct console *co, char *options)
co->index = 0;
uart = &bfin_serial_ports[co->index];
-# ifdef CONFIG_SERIAL_BFIN_CONSOLE
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
bfin_serial_console_get_options(uart, &baud, &parity, &bits);
return uart_set_options(&uart->port, co, baud, parity, bits, flow);
-# else
- return 0;
-# endif
}
#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) ||
defined (CONFIG_EARLY_PRINTK) */
@@ -1076,10 +1110,7 @@ static int __init bfin_serial_rs_console_init(void)
{
bfin_serial_init_ports();
register_console(&bfin_serial_console);
-#ifdef CONFIG_KGDB_UART
- kgdb_entry_state = 0;
- init_kgdb_uart();
-#endif
+
return 0;
}
console_initcall(bfin_serial_rs_console_init);
@@ -1144,7 +1175,7 @@ struct console __init *bfin_earlyserial_init(unsigned int port,
return &bfin_early_serial_console;
}
-#endif /* CONFIG_SERIAL_BFIN_CONSOLE */
+#endif /* CONFIG_EARLY_PRINTK */
static struct uart_driver bfin_serial_reg = {
.owner = THIS_MODULE,
@@ -1235,10 +1266,6 @@ static struct platform_driver bfin_serial_driver = {
static int __init bfin_serial_init(void)
{
int ret;
-#ifdef CONFIG_KGDB_UART
- struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
- struct ktermios t;
-#endif
pr_info("Serial: Blackfin serial driver\n");
@@ -1252,21 +1279,6 @@ static int __init bfin_serial_init(void)
uart_unregister_driver(&bfin_serial_reg);
}
}
-#ifdef CONFIG_KGDB_UART
- if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) {
- request_irq(uart->port.irq, bfin_serial_rx_int,
- IRQF_DISABLED, "BFIN_UART_RX", uart);
- pr_info("Request irq for kgdb uart port\n");
- UART_SET_IER(uart, ERBFI);
- SSYNC();
- t.c_cflag = CS8|B57600;
- t.c_iflag = 0;
- t.c_oflag = 0;
- t.c_lflag = ICANON;
- t.c_line = CONFIG_KGDB_UART_PORT;
- bfin_serial_set_termios(&uart->port, &t, &t);
- }
-#endif
return ret;
}
@@ -1276,6 +1288,7 @@ static void __exit bfin_serial_exit(void)
uart_unregister_driver(&bfin_serial_reg);
}
+
module_init(bfin_serial_init);
module_exit(bfin_serial_exit);
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index dd8564d2505..529c0ff7952 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -99,7 +99,7 @@ static void sport_stop_tx(struct uart_port *port);
static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
{
- pr_debug("%s value:%x\n", __FUNCTION__, value);
+ pr_debug("%s value:%x\n", __func__, value);
/* Place a Start and Stop bit */
__asm__ volatile (
"R2 = b#01111111100;\n\t"
@@ -110,7 +110,7 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
:"=r"(value)
:"0"(value)
:"R2", "R3");
- pr_debug("%s value:%x\n", __FUNCTION__, value);
+ pr_debug("%s value:%x\n", __func__, value);
SPORT_PUT_TX(up, value);
}
@@ -120,7 +120,7 @@ static inline unsigned int rx_one_byte(struct sport_uart_port *up)
unsigned int value, extract;
value = SPORT_GET_RX32(up);
- pr_debug("%s value:%x\n", __FUNCTION__, value);
+ pr_debug("%s value:%x\n", __func__, value);
/* Extract 8 bits data */
__asm__ volatile (
@@ -151,12 +151,12 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate)
/* Set TCR1 and TCR2 */
SPORT_PUT_TCR1(up, (LTFS | ITFS | TFSR | TLSBIT | ITCLK));
SPORT_PUT_TCR2(up, 10);
- pr_debug("%s TCR1:%x, TCR2:%x\n", __FUNCTION__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
+ pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
/* Set RCR1 and RCR2 */
SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK));
SPORT_PUT_RCR2(up, 28);
- pr_debug("%s RCR1:%x, RCR2:%x\n", __FUNCTION__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up));
+ pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up));
tclkdiv = sclk/(2 * baud_rate) - 1;
tfsdiv = 12;
@@ -166,7 +166,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate)
SPORT_PUT_RCLKDIV(up, rclkdiv);
SSYNC();
pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, tfsdiv:%d, rclkdiv:%d\n",
- __FUNCTION__, sclk, baud_rate, tclkdiv, tfsdiv, rclkdiv);
+ __func__, sclk, baud_rate, tclkdiv, tfsdiv, rclkdiv);
return 0;
}
@@ -231,7 +231,7 @@ static int sport_startup(struct uart_port *port)
char buffer[20];
int retval;
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
memset(buffer, 20, '\0');
snprintf(buffer, 20, "%s rx", up->name);
retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up);
@@ -320,7 +320,7 @@ static unsigned int sport_tx_empty(struct uart_port *port)
unsigned int stat;
stat = SPORT_GET_STAT(up);
- pr_debug("%s stat:%04x\n", __FUNCTION__, stat);
+ pr_debug("%s stat:%04x\n", __func__, stat);
if (stat & TXHRE) {
return TIOCSER_TEMT;
} else
@@ -329,13 +329,13 @@ static unsigned int sport_tx_empty(struct uart_port *port)
static unsigned int sport_get_mctrl(struct uart_port *port)
{
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
return (TIOCM_CTS | TIOCM_CD | TIOCM_DSR);
}
static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
}
static void sport_stop_tx(struct uart_port *port)
@@ -343,7 +343,7 @@ static void sport_stop_tx(struct uart_port *port)
struct sport_uart_port *up = (struct sport_uart_port *)port;
unsigned int stat;
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
stat = SPORT_GET_STAT(up);
while(!(stat & TXHRE)) {
@@ -366,21 +366,21 @@ static void sport_start_tx(struct uart_port *port)
{
struct sport_uart_port *up = (struct sport_uart_port *)port;
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
/* Write data into SPORT FIFO before enable SPROT to transmit */
sport_uart_tx_chars(up);
/* Enable transmit, then an interrupt will generated */
SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
SSYNC();
- pr_debug("%s exit\n", __FUNCTION__);
+ pr_debug("%s exit\n", __func__);
}
static void sport_stop_rx(struct uart_port *port)
{
struct sport_uart_port *up = (struct sport_uart_port *)port;
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
/* Disable sport to stop rx */
SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN));
SSYNC();
@@ -388,19 +388,19 @@ static void sport_stop_rx(struct uart_port *port)
static void sport_enable_ms(struct uart_port *port)
{
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
}
static void sport_break_ctl(struct uart_port *port, int break_state)
{
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
}
static void sport_shutdown(struct uart_port *port)
{
struct sport_uart_port *up = (struct sport_uart_port *)port;
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
/* Disable sport */
SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN));
@@ -421,7 +421,7 @@ static void sport_shutdown(struct uart_port *port)
static void sport_set_termios(struct uart_port *port,
struct termios *termios, struct termios *old)
{
- pr_debug("%s enter, c_cflag:%08x\n", __FUNCTION__, termios->c_cflag);
+ pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag);
uart_update_timeout(port, CS8 ,port->uartclk);
}
@@ -429,18 +429,18 @@ static const char *sport_type(struct uart_port *port)
{
struct sport_uart_port *up = (struct sport_uart_port *)port;
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
return up->name;
}
static void sport_release_port(struct uart_port *port)
{
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
}
static int sport_request_port(struct uart_port *port)
{
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
return 0;
}
@@ -448,13 +448,13 @@ static void sport_config_port(struct uart_port *port, int flags)
{
struct sport_uart_port *up = (struct sport_uart_port *)port;
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
up->port.type = PORT_BFIN_SPORT;
}
static int sport_verify_port(struct uart_port *port, struct serial_struct *ser)
{
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
return 0;
}
@@ -527,7 +527,7 @@ static int sport_uart_suspend(struct platform_device *dev, pm_message_t state)
{
struct sport_uart_port *sport = platform_get_drvdata(dev);
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
if (sport)
uart_suspend_port(&sport_uart_reg, &sport->port);
@@ -538,7 +538,7 @@ static int sport_uart_resume(struct platform_device *dev)
{
struct sport_uart_port *sport = platform_get_drvdata(dev);
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
if (sport)
uart_resume_port(&sport_uart_reg, &sport->port);
@@ -547,7 +547,7 @@ static int sport_uart_resume(struct platform_device *dev)
static int sport_uart_probe(struct platform_device *dev)
{
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
sport_uart_ports[dev->id].port.dev = &dev->dev;
uart_add_one_port(&sport_uart_reg, &sport_uart_ports[dev->id].port);
platform_set_drvdata(dev, &sport_uart_ports[dev->id]);
@@ -559,7 +559,7 @@ static int sport_uart_remove(struct platform_device *dev)
{
struct sport_uart_port *sport = platform_get_drvdata(dev);
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
platform_set_drvdata(dev, NULL);
if (sport)
@@ -582,7 +582,7 @@ static int __init sport_uart_init(void)
{
int ret;
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
ret = uart_register_driver(&sport_uart_reg);
if (ret != 0) {
printk(KERN_ERR "Failed to register %s:%d\n",
@@ -597,13 +597,13 @@ static int __init sport_uart_init(void)
}
- pr_debug("%s exit\n", __FUNCTION__);
+ pr_debug("%s exit\n", __func__);
return ret;
}
static void __exit sport_uart_exit(void)
{
- pr_debug("%s enter\n", __FUNCTION__);
+ pr_debug("%s enter\n", __func__);
platform_driver_unregister(&sport_uart_driver);
uart_unregister_driver(&sport_uart_reg);
}
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 8b2c619a09f..e642c22c80e 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -1203,7 +1203,7 @@ static void e100_disable_txdma_channel(struct e100_serial *info)
unsigned long flags;
/* Disable output DMA channel for the serial port in question
- * ( set to something other then serialX)
+ * ( set to something other than serialX)
*/
local_irq_save(flags);
DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
@@ -1266,7 +1266,7 @@ static void e100_disable_rxdma_channel(struct e100_serial *info)
unsigned long flags;
/* Disable input DMA channel for the serial port in question
- * ( set to something other then serialX)
+ * ( set to something other than serialX)
*/
local_irq_save(flags);
if (info->line == 0) {
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 3f90f1bbbbc..a50954612b6 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -66,7 +66,7 @@
#define ONEMS 0xb0 /* One Millisecond register */
#define UTS 0xb4 /* UART Test Register */
#endif
-#ifdef CONFIG_ARCH_IMX
+#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
#define BIPR1 0xb0 /* Incremental Preset Register 1 */
#define BIPR2 0xb4 /* Incremental Preset Register 2 */
#define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -96,7 +96,7 @@
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
#define UCR1_SNDBRK (1<<4) /* Send break */
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
-#ifdef CONFIG_ARCH_IMX
+#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
#endif
#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -187,11 +187,11 @@
#define MAX_INTERNAL_IRQ IMX_IRQS
#endif
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#ifdef CONFIG_ARCH_MXC
#define SERIAL_IMX_MAJOR 207
#define MINOR_START 16
#define DEV_NAME "ttymxc"
-#define MAX_INTERNAL_IRQ MXC_MAX_INT_LINES
+#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS
#endif
/*
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index a697914ae3d..3547558d2ca 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -272,7 +272,7 @@ static void jsm_tty_close(struct uart_port *port)
jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
bd = channel->ch_bd;
- ts = channel->uart_port.info->port.tty->termios;
+ ts = port->info->port.tty->termios;
channel->ch_flags &= ~(CH_STOPI);
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 28c00c3d58f..0c3a2ab1612 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -429,14 +429,24 @@ mpc52xx_uart_tx_empty(struct uart_port *port)
static void
mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- /* Not implemented */
+ if (mctrl & TIOCM_RTS)
+ out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS);
+ else
+ out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS);
}
static unsigned int
mpc52xx_uart_get_mctrl(struct uart_port *port)
{
- /* Not implemented */
- return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+ unsigned int ret = TIOCM_DSR;
+ u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
+
+ if (!(status & MPC52xx_PSC_CTS))
+ ret |= TIOCM_CTS;
+ if (!(status & MPC52xx_PSC_DCD))
+ ret |= TIOCM_CAR;
+
+ return ret;
}
static void
@@ -479,7 +489,15 @@ mpc52xx_uart_stop_rx(struct uart_port *port)
static void
mpc52xx_uart_enable_ms(struct uart_port *port)
{
- /* Not implemented */
+ struct mpc52xx_psc __iomem *psc = PSC(port);
+
+ /* clear D_*-bits by reading them */
+ in_8(&psc->mpc52xx_psc_ipcr);
+ /* enable CTS and DCD as IPC interrupts */
+ out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
+
+ port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
+ out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
}
static void
@@ -580,6 +598,10 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
MPC52xx_PSC_MODE_ONE_STOP_5_BITS :
MPC52xx_PSC_MODE_ONE_STOP;
+ if (new->c_cflag & CRTSCTS) {
+ mr1 |= MPC52xx_PSC_MODE_RXRTS;
+ mr2 |= MPC52xx_PSC_MODE_TXCTS;
+ }
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
@@ -617,6 +639,9 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
out_8(&psc->ctur, ctr >> 8);
out_8(&psc->ctlr, ctr & 0xff);
+ if (UART_ENABLE_MS(port, new->c_cflag))
+ mpc52xx_uart_enable_ms(port);
+
/* Reenable TX & RX */
out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
@@ -752,10 +777,15 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
if (status & MPC52xx_PSC_SR_RB) {
flag = TTY_BREAK;
uart_handle_break(port);
- } else if (status & MPC52xx_PSC_SR_PE)
+ port->icount.brk++;
+ } else if (status & MPC52xx_PSC_SR_PE) {
flag = TTY_PARITY;
- else if (status & MPC52xx_PSC_SR_FE)
+ port->icount.parity++;
+ }
+ else if (status & MPC52xx_PSC_SR_FE) {
flag = TTY_FRAME;
+ port->icount.frame++;
+ }
/* Clear error condition */
out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT);
@@ -769,6 +799,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
* affect the current character
*/
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ port->icount.overrun++;
}
}
@@ -826,6 +857,7 @@ mpc52xx_uart_int(int irq, void *dev_id)
struct uart_port *port = dev_id;
unsigned long pass = ISR_PASS_LIMIT;
unsigned int keepgoing;
+ u8 status;
spin_lock(&port->lock);
@@ -842,6 +874,13 @@ mpc52xx_uart_int(int irq, void *dev_id)
if (psc_ops->tx_rdy(port))
keepgoing |= mpc52xx_uart_int_tx_chars(port);
+ status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
+ if (status & MPC52xx_PSC_D_DCD)
+ uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD));
+
+ if (status & MPC52xx_PSC_D_CTS)
+ uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS));
+
/* Limit number of iteration */
if (!(--pass))
keepgoing = 0;
@@ -1109,22 +1148,29 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
return ret;
port->mapbase = res.start;
+ if (!port->mapbase) {
+ dev_dbg(&op->dev, "Could not allocate resources for PSC\n");
+ return -EINVAL;
+ }
+
port->irq = irq_of_parse_and_map(op->node, 0);
+ if (port->irq == NO_IRQ) {
+ dev_dbg(&op->dev, "Could not get irq\n");
+ return -EINVAL;
+ }
dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n",
(void *)port->mapbase, port->irq, port->uartclk);
- if ((port->irq == NO_IRQ) || !port->mapbase) {
- printk(KERN_ERR "Could not allocate resources for PSC\n");
- return -EINVAL;
- }
-
/* Add the port to the uart sub-system */
ret = uart_add_one_port(&mpc52xx_uart_driver, port);
- if (!ret)
- dev_set_drvdata(&op->dev, (void *)port);
+ if (ret) {
+ irq_dispose_mapping(port->irq);
+ return ret;
+ }
- return ret;
+ dev_set_drvdata(&op->dev, (void *)port);
+ return 0;
}
static int
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
new file mode 100644
index 00000000000..32f3eaf0d26
--- /dev/null
+++ b/drivers/serial/nwpserial.c
@@ -0,0 +1,475 @@
+/*
+ * Serial Port driver for a NWP uart device
+ *
+ * Copyright (C) 2008 IBM Corp., Benjamin Krill <ben@codiert.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/irqreturn.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/nwpserial.h>
+#include <asm/prom.h>
+#include <asm/dcr.h>
+
+#define NWPSERIAL_NR 2
+
+#define NWPSERIAL_STATUS_RXVALID 0x1
+#define NWPSERIAL_STATUS_TXFULL 0x2
+
+struct nwpserial_port {
+ struct uart_port port;
+ dcr_host_t dcr_host;
+ unsigned int ier;
+ unsigned int mcr;
+};
+
+static DEFINE_MUTEX(nwpserial_mutex);
+static struct nwpserial_port nwpserial_ports[NWPSERIAL_NR];
+
+static void wait_for_bits(struct nwpserial_port *up, int bits)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ do {
+ status = dcr_read(up->dcr_host, UART_LSR);
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while ((status & bits) != bits);
+}
+
+#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
+static void nwpserial_console_putchar(struct uart_port *port, int c)
+{
+ struct nwpserial_port *up;
+ up = container_of(port, struct nwpserial_port, port);
+ /* check if tx buffer is full */
+ wait_for_bits(up, UART_LSR_THRE);
+ dcr_write(up->dcr_host, UART_TX, c);
+ up->port.icount.tx++;
+}
+
+static void
+nwpserial_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct nwpserial_port *up = &nwpserial_ports[co->index];
+ unsigned long flags;
+ int locked = 1;
+
+ if (oops_in_progress)
+ locked = spin_trylock_irqsave(&up->port.lock, flags);
+ else
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /* save and disable interrupt */
+ up->ier = dcr_read(up->dcr_host, UART_IER);
+ dcr_write(up->dcr_host, UART_IER, up->ier & ~UART_IER_RDI);
+
+ uart_console_write(&up->port, s, count, nwpserial_console_putchar);
+
+ /* wait for transmitter to become emtpy */
+ while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
+ cpu_relax();
+
+ /* restore interrupt state */
+ dcr_write(up->dcr_host, UART_IER, up->ier);
+
+ if (locked)
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static struct uart_driver nwpserial_reg;
+static struct console nwpserial_console = {
+ .name = "ttySQ",
+ .write = nwpserial_console_write,
+ .device = uart_console_device,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &nwpserial_reg,
+};
+#define NWPSERIAL_CONSOLE (&nwpserial_console)
+#else
+#define NWPSERIAL_CONSOLE NULL
+#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */
+
+/**************************************************************************/
+
+static int nwpserial_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void nwpserial_release_port(struct uart_port *port)
+{
+ /* N/A */
+}
+
+static void nwpserial_config_port(struct uart_port *port, int flags)
+{
+ port->type = PORT_NWPSERIAL;
+}
+
+static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
+{
+ struct nwpserial_port *up = dev_id;
+ struct tty_struct *tty = up->port.info->port.tty;
+ irqreturn_t ret;
+ unsigned int iir;
+ unsigned char ch;
+
+ spin_lock(&up->port.lock);
+
+ /* check if the uart was the interrupt source. */
+ iir = dcr_read(up->dcr_host, UART_IIR);
+ if (!iir) {
+ ret = IRQ_NONE;
+ goto out;
+ }
+
+ do {
+ up->port.icount.rx++;
+ ch = dcr_read(up->dcr_host, UART_RX);
+ if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID)
+ tty_insert_flip_char(tty, ch, TTY_NORMAL);
+ } while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR);
+
+ tty_flip_buffer_push(tty);
+ ret = IRQ_HANDLED;
+
+out:
+ spin_unlock(&up->port.lock);
+ return ret;
+}
+
+static int nwpserial_startup(struct uart_port *port)
+{
+ struct nwpserial_port *up;
+ int err;
+
+ up = container_of(port, struct nwpserial_port, port);
+
+ /* disable flow control by default */
+ up->mcr = dcr_read(up->dcr_host, UART_MCR) & ~UART_MCR_AFE;
+ dcr_write(up->dcr_host, UART_MCR, up->mcr);
+
+ /* register interrupt handler */
+ err = request_irq(up->port.irq, nwpserial_interrupt,
+ IRQF_SHARED, "nwpserial", up);
+ if (err)
+ return err;
+
+ /* enable interrupts */
+ up->ier = UART_IER_RDI;
+ dcr_write(up->dcr_host, UART_IER, up->ier);
+
+ /* enable receiving */
+ up->port.ignore_status_mask &= ~NWPSERIAL_STATUS_RXVALID;
+
+ return 0;
+}
+
+static void nwpserial_shutdown(struct uart_port *port)
+{
+ struct nwpserial_port *up;
+ up = container_of(port, struct nwpserial_port, port);
+
+ /* disable receiving */
+ up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID;
+
+ /* disable interrupts from this port */
+ up->ier = 0;
+ dcr_write(up->dcr_host, UART_IER, up->ier);
+
+ /* free irq */
+ free_irq(up->port.irq, port);
+}
+
+static int nwpserial_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ return -EINVAL;
+}
+
+static const char *nwpserial_type(struct uart_port *port)
+{
+ return port->type == PORT_NWPSERIAL ? "nwpserial" : NULL;
+}
+
+static void nwpserial_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old)
+{
+ struct nwpserial_port *up;
+ up = container_of(port, struct nwpserial_port, port);
+
+ up->port.read_status_mask = NWPSERIAL_STATUS_RXVALID
+ | NWPSERIAL_STATUS_TXFULL;
+
+ up->port.ignore_status_mask = 0;
+ /* ignore all characters if CREAD is not set */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID;
+
+ /* Copy back the old hardware settings */
+ if (old)
+ tty_termios_copy_hw(termios, old);
+}
+
+static void nwpserial_break_ctl(struct uart_port *port, int ctl)
+{
+ /* N/A */
+}
+
+static void nwpserial_enable_ms(struct uart_port *port)
+{
+ /* N/A */
+}
+
+static void nwpserial_stop_rx(struct uart_port *port)
+{
+ struct nwpserial_port *up;
+ up = container_of(port, struct nwpserial_port, port);
+ /* don't forward any more data (like !CREAD) */
+ up->port.ignore_status_mask = NWPSERIAL_STATUS_RXVALID;
+}
+
+static void nwpserial_putchar(struct nwpserial_port *up, unsigned char c)
+{
+ /* check if tx buffer is full */
+ wait_for_bits(up, UART_LSR_THRE);
+ dcr_write(up->dcr_host, UART_TX, c);
+ up->port.icount.tx++;
+}
+
+static void nwpserial_start_tx(struct uart_port *port)
+{
+ struct nwpserial_port *up;
+ struct circ_buf *xmit;
+ up = container_of(port, struct nwpserial_port, port);
+ xmit = &up->port.info->xmit;
+
+ if (port->x_char) {
+ nwpserial_putchar(up, up->port.x_char);
+ port->x_char = 0;
+ }
+
+ while (!(uart_circ_empty(xmit) || uart_tx_stopped(&up->port))) {
+ nwpserial_putchar(up, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
+ }
+}
+
+static unsigned int nwpserial_get_mctrl(struct uart_port *port)
+{
+ return 0;
+}
+
+static void nwpserial_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* N/A */
+}
+
+static void nwpserial_stop_tx(struct uart_port *port)
+{
+ /* N/A */
+}
+
+static unsigned int nwpserial_tx_empty(struct uart_port *port)
+{
+ struct nwpserial_port *up;
+ unsigned long flags;
+ int ret;
+ up = container_of(port, struct nwpserial_port, port);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = dcr_read(up->dcr_host, UART_LSR);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+}
+
+static struct uart_ops nwpserial_pops = {
+ .tx_empty = nwpserial_tx_empty,
+ .set_mctrl = nwpserial_set_mctrl,
+ .get_mctrl = nwpserial_get_mctrl,
+ .stop_tx = nwpserial_stop_tx,
+ .start_tx = nwpserial_start_tx,
+ .stop_rx = nwpserial_stop_rx,
+ .enable_ms = nwpserial_enable_ms,
+ .break_ctl = nwpserial_break_ctl,
+ .startup = nwpserial_startup,
+ .shutdown = nwpserial_shutdown,
+ .set_termios = nwpserial_set_termios,
+ .type = nwpserial_type,
+ .release_port = nwpserial_release_port,
+ .request_port = nwpserial_request_port,
+ .config_port = nwpserial_config_port,
+ .verify_port = nwpserial_verify_port,
+};
+
+static struct uart_driver nwpserial_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "nwpserial",
+ .dev_name = "ttySQ",
+ .major = TTY_MAJOR,
+ .minor = 68,
+ .nr = NWPSERIAL_NR,
+ .cons = NWPSERIAL_CONSOLE,
+};
+
+int nwpserial_register_port(struct uart_port *port)
+{
+ struct nwpserial_port *up = NULL;
+ int ret = -1;
+ int i;
+ static int first = 1;
+ int dcr_len;
+ int dcr_base;
+ struct device_node *dn;
+
+ mutex_lock(&nwpserial_mutex);
+
+ dn = to_of_device(port->dev)->node;
+ if (dn == NULL)
+ goto out;
+
+ /* get dcr base. */
+ dcr_base = dcr_resource_start(dn, 0);
+
+ /* find matching entry */
+ for (i = 0; i < NWPSERIAL_NR; i++)
+ if (nwpserial_ports[i].port.iobase == dcr_base) {
+ up = &nwpserial_ports[i];
+ break;
+ }
+
+ /* we didn't find a mtching entry, search for a free port */
+ if (up == NULL)
+ for (i = 0; i < NWPSERIAL_NR; i++)
+ if (nwpserial_ports[i].port.type == PORT_UNKNOWN &&
+ nwpserial_ports[i].port.iobase == 0) {
+ up = &nwpserial_ports[i];
+ break;
+ }
+
+ if (up == NULL) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (first)
+ uart_register_driver(&nwpserial_reg);
+ first = 0;
+
+ up->port.membase = port->membase;
+ up->port.irq = port->irq;
+ up->port.uartclk = port->uartclk;
+ up->port.fifosize = port->fifosize;
+ up->port.regshift = port->regshift;
+ up->port.iotype = port->iotype;
+ up->port.flags = port->flags;
+ up->port.mapbase = port->mapbase;
+ up->port.private_data = port->private_data;
+
+ if (port->dev)
+ up->port.dev = port->dev;
+
+ if (up->port.iobase != dcr_base) {
+ up->port.ops = &nwpserial_pops;
+ up->port.fifosize = 16;
+
+ spin_lock_init(&up->port.lock);
+
+ up->port.iobase = dcr_base;
+ dcr_len = dcr_resource_len(dn, 0);
+
+ up->dcr_host = dcr_map(dn, dcr_base, dcr_len);
+ if (!DCR_MAP_OK(up->dcr_host)) {
+ printk(KERN_ERR "Cannot map DCR resources for NWPSERIAL");
+ goto out;
+ }
+ }
+
+ ret = uart_add_one_port(&nwpserial_reg, &up->port);
+ if (ret == 0)
+ ret = up->port.line;
+
+out:
+ mutex_unlock(&nwpserial_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(nwpserial_register_port);
+
+void nwpserial_unregister_port(int line)
+{
+ struct nwpserial_port *up = &nwpserial_ports[line];
+ mutex_lock(&nwpserial_mutex);
+ uart_remove_one_port(&nwpserial_reg, &up->port);
+
+ up->port.type = PORT_UNKNOWN;
+
+ mutex_unlock(&nwpserial_mutex);
+}
+EXPORT_SYMBOL(nwpserial_unregister_port);
+
+#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
+static int __init nwpserial_console_init(void)
+{
+ struct nwpserial_port *up = NULL;
+ struct device_node *dn;
+ const char *name;
+ int dcr_base;
+ int dcr_len;
+ int i;
+
+ /* search for a free port */
+ for (i = 0; i < NWPSERIAL_NR; i++)
+ if (nwpserial_ports[i].port.type == PORT_UNKNOWN) {
+ up = &nwpserial_ports[i];
+ break;
+ }
+
+ if (up == NULL)
+ return -1;
+
+ name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+ if (name == NULL)
+ return -1;
+
+ dn = of_find_node_by_path(name);
+ if (!dn)
+ return -1;
+
+ spin_lock_init(&up->port.lock);
+ up->port.ops = &nwpserial_pops;
+ up->port.type = PORT_NWPSERIAL;
+ up->port.fifosize = 16;
+
+ dcr_base = dcr_resource_start(dn, 0);
+ dcr_len = dcr_resource_len(dn, 0);
+ up->port.iobase = dcr_base;
+
+ up->dcr_host = dcr_map(dn, dcr_base, dcr_len);
+ if (!DCR_MAP_OK(up->dcr_host)) {
+ printk("Cannot map DCR resources for SERIAL");
+ return -1;
+ }
+ register_console(&nwpserial_console);
+ return 0;
+}
+console_initcall(nwpserial_console_init);
+#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 8fa0ff561e9..a821e3a3d66 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -14,6 +14,7 @@
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/of_platform.h>
+#include <linux/nwpserial.h>
#include <asm/prom.h>
@@ -99,9 +100,16 @@ static int __devinit of_platform_serial_probe(struct of_device *ofdev,
goto out;
switch (port_type) {
+#ifdef CONFIG_SERIAL_8250
case PORT_8250 ... PORT_MAX_8250:
ret = serial8250_register_port(&port);
break;
+#endif
+#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
+ case PORT_NWPSERIAL:
+ ret = nwpserial_register_port(&port);
+ break;
+#endif
default:
/* need to add code for these */
case PORT_UNKNOWN:
@@ -129,9 +137,16 @@ static int of_platform_serial_remove(struct of_device *ofdev)
{
struct of_serial_info *info = ofdev->dev.driver_data;
switch (info->type) {
+#ifdef CONFIG_SERIAL_8250
case PORT_8250 ... PORT_MAX_8250:
serial8250_unregister_port(info->line);
break;
+#endif
+#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
+ case PORT_NWPSERIAL:
+ nwpserial_unregister_port(info->line);
+ break;
+#endif
default:
/* need to add code for these */
break;
@@ -148,6 +163,10 @@ static struct of_device_id __devinitdata of_platform_serial_table[] = {
{ .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, },
{ .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, },
{ .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, },
+#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
+ { .type = "serial", .compatible = "ibm,qpace-nwp-serial",
+ .data = (void *)PORT_NWPSERIAL, },
+#endif
{ .type = "serial", .data = (void *)PORT_UNKNOWN, },
{ /* end of list */ },
};
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 317b061f764..ad348850401 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1383,6 +1383,29 @@ static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser)
return -EINVAL;
}
+#ifdef CONFIG_CONSOLE_POLL
+
+static int pmz_poll_get_char(struct uart_port *port)
+{
+ struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+
+ while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0)
+ udelay(5);
+ return read_zsdata(uap);
+}
+
+static void pmz_poll_put_char(struct uart_port *port, unsigned char c)
+{
+ struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+
+ /* Wait for the transmit buffer to empty. */
+ while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
+ udelay(5);
+ write_zsdata(uap, c);
+}
+
+#endif
+
static struct uart_ops pmz_pops = {
.tx_empty = pmz_tx_empty,
.set_mctrl = pmz_set_mctrl,
@@ -1400,6 +1423,10 @@ static struct uart_ops pmz_pops = {
.request_port = pmz_request_port,
.config_port = pmz_config_port,
.verify_port = pmz_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = pmz_poll_get_char,
+ .poll_put_char = pmz_poll_put_char,
+#endif
};
/*
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index abc00be5543..f6e3b86bb0b 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -48,6 +48,7 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
struct uart_pxa_port {
@@ -766,7 +767,7 @@ static int serial_pxa_probe(struct platform_device *dev)
if (!sport)
return -ENOMEM;
- sport->clk = clk_get(&dev->dev, "UARTCLK");
+ sport->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(sport->clk)) {
ret = PTR_ERR(sport->clk);
goto err_free;
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
new file mode 100644
index 00000000000..ebf2fd3c8f7
--- /dev/null
+++ b/drivers/serial/s3c24a0.c
@@ -0,0 +1,118 @@
+/* linux/drivers/serial/s3c24a0.c
+ *
+ * Driver for Samsung S3C24A0 SoC onboard UARTs.
+ *
+ * Based on drivers/serial/s3c2410.c
+ *
+ * Author: Sandeep Patil <sandeep.patil@azingo.com>
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+
+#include "samsung.h"
+
+static int s3c24a0_serial_setsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ if (strcmp(clk->name, "uclk") == 0)
+ ucon |= S3C2410_UCON_UCLK;
+ else
+ ucon &= ~S3C2410_UCON_UCLK;
+
+ wr_regl(port, S3C2410_UCON, ucon);
+ return 0;
+}
+
+static int s3c24a0_serial_getsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ clk->divisor = 1;
+ clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
+
+ return 0;
+}
+
+static int s3c24a0_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n",
+ port, port->mapbase, cfg);
+
+ wr_regl(port, S3C2410_UCON, cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+ /* reset both fifos */
+
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ return 0;
+}
+
+static struct s3c24xx_uart_info s3c24a0_uart_inf = {
+ .name = "Samsung S3C24A0 UART",
+ .type = PORT_S3C2410,
+ .fifosize = 16,
+ .rx_fifomask = S3C24A0_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C24A0_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C24A0_UFSTAT_RXFULL,
+ .tx_fifofull = S3C24A0_UFSTAT_TXFULL,
+ .tx_fifomask = S3C24A0_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C24A0_UFSTAT_TXSHIFT,
+ .get_clksrc = s3c24a0_serial_getsource,
+ .set_clksrc = s3c24a0_serial_setsource,
+ .reset_port = s3c24a0_serial_resetport,
+};
+
+static int s3c24a0_serial_probe(struct platform_device *dev)
+{
+ return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
+}
+
+static struct platform_driver s3c24a0_serial_drv = {
+ .probe = s3c24a0_serial_probe,
+ .remove = s3c24xx_serial_remove,
+ .driver = {
+ .name = "s3c24a0-uart",
+ .owner = THIS_MODULE,
+ },
+};
+
+s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+
+static int __init s3c24a0_serial_init(void)
+{
+ return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+}
+
+static void __exit s3c24a0_serial_exit(void)
+{
+ platform_driver_unregister(&s3c24a0_serial_drv);
+}
+
+module_init(s3c24a0_serial_init);
+module_exit(s3c24a0_serial_exit);
+
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
new file mode 100644
index 00000000000..06936d13393
--- /dev/null
+++ b/drivers/serial/s3c6400.c
@@ -0,0 +1,151 @@
+/* linux/drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs.
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+
+#include "samsung.h"
+
+static int s3c6400_serial_setsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ if (strcmp(clk->name, "uclk0") == 0) {
+ ucon &= ~S3C6400_UCON_CLKMASK;
+ ucon |= S3C6400_UCON_UCLK0;
+ } else if (strcmp(clk->name, "uclk1") == 0)
+ ucon |= S3C6400_UCON_UCLK1;
+ else if (strcmp(clk->name, "pclk") == 0) {
+ /* See notes about transitioning from UCLK to PCLK */
+ ucon &= ~S3C6400_UCON_UCLK0;
+ } else {
+ printk(KERN_ERR "unknown clock source %s\n", clk->name);
+ return -EINVAL;
+ }
+
+ wr_regl(port, S3C2410_UCON, ucon);
+ return 0;
+}
+
+
+static int s3c6400_serial_getsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ u32 ucon = rd_regl(port, S3C2410_UCON);
+
+ clk->divisor = 1;
+
+ switch (ucon & S3C6400_UCON_CLKMASK) {
+ case S3C6400_UCON_UCLK0:
+ clk->name = "uclk0";
+ break;
+
+ case S3C6400_UCON_UCLK1:
+ clk->name = "uclk1";
+ break;
+
+ case S3C6400_UCON_PCLK:
+ case S3C6400_UCON_PCLK2:
+ clk->name = "pclk";
+ break;
+ }
+
+ return 0;
+}
+
+static int s3c6400_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n",
+ port, port->mapbase, cfg);
+
+ /* ensure we don't change the clock settings... */
+
+ ucon &= S3C6400_UCON_CLKMASK;
+
+ wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+ /* reset both fifos */
+
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ return 0;
+}
+
+static struct s3c24xx_uart_info s3c6400_uart_inf = {
+ .name = "Samsung S3C6400 UART",
+ .type = PORT_S3C6400,
+ .fifosize = 64,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .get_clksrc = s3c6400_serial_getsource,
+ .set_clksrc = s3c6400_serial_setsource,
+ .reset_port = s3c6400_serial_resetport,
+};
+
+/* device management */
+
+static int s3c6400_serial_probe(struct platform_device *dev)
+{
+ dbg("s3c6400_serial_probe: dev=%p\n", dev);
+ return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
+}
+
+static struct platform_driver s3c6400_serial_drv = {
+ .probe = s3c6400_serial_probe,
+ .remove = s3c24xx_serial_remove,
+ .driver = {
+ .name = "s3c6400-uart",
+ .owner = THIS_MODULE,
+ },
+};
+
+s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+
+static int __init s3c6400_serial_init(void)
+{
+ return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+}
+
+static void __exit s3c6400_serial_exit(void)
+{
+ platform_driver_unregister(&s3c6400_serial_drv);
+}
+
+module_init(s3c6400_serial_init);
+module_exit(s3c6400_serial_exit);
+
+MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c6400-uart");
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1e219d3d035..41ac94872b8 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -42,13 +42,14 @@
#include <linux/serial.h>
#include <linux/delay.h>
#include <linux/clk.h>
+#include <linux/cpufreq.h>
#include <asm/irq.h>
#include <mach/hardware.h>
+#include <mach/map.h>
#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
#include "samsung.h"
@@ -58,19 +59,6 @@
#define S3C24XX_SERIAL_MAJOR 204
#define S3C24XX_SERIAL_MINOR 64
-/* we can support 3 uarts, but not always use them */
-
-#ifdef CONFIG_CPU_S3C2400
-#define NR_PORTS (2)
-#else
-#define NR_PORTS (3)
-#endif
-
-/* port irq numbers */
-
-#define TX_IRQ(port) ((port)->irq + 1)
-#define RX_IRQ(port) ((port)->irq)
-
/* macros to change one thing to another */
#define tx_enabled(port) ((port)->unused[0])
@@ -136,8 +124,10 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port)
static void s3c24xx_serial_stop_tx(struct uart_port *port)
{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
if (tx_enabled(port)) {
- disable_irq(TX_IRQ(port));
+ disable_irq(ourport->tx_irq);
tx_enabled(port) = 0;
if (port->flags & UPF_CONS_FLOW)
s3c24xx_serial_rx_enable(port);
@@ -146,11 +136,13 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
static void s3c24xx_serial_start_tx(struct uart_port *port)
{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
if (!tx_enabled(port)) {
if (port->flags & UPF_CONS_FLOW)
s3c24xx_serial_rx_disable(port);
- enable_irq(TX_IRQ(port));
+ enable_irq(ourport->tx_irq);
tx_enabled(port) = 1;
}
}
@@ -158,9 +150,11 @@ static void s3c24xx_serial_start_tx(struct uart_port *port)
static void s3c24xx_serial_stop_rx(struct uart_port *port)
{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
if (rx_enabled(port)) {
dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
- disable_irq(RX_IRQ(port));
+ disable_irq(ourport->rx_irq);
rx_enabled(port) = 0;
}
}
@@ -384,13 +378,13 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (ourport->tx_claimed) {
- free_irq(TX_IRQ(port), ourport);
+ free_irq(ourport->tx_irq, ourport);
tx_enabled(port) = 0;
ourport->tx_claimed = 0;
}
if (ourport->rx_claimed) {
- free_irq(RX_IRQ(port), ourport);
+ free_irq(ourport->rx_irq, ourport);
ourport->rx_claimed = 0;
rx_enabled(port) = 0;
}
@@ -407,12 +401,11 @@ static int s3c24xx_serial_startup(struct uart_port *port)
rx_enabled(port) = 1;
- ret = request_irq(RX_IRQ(port),
- s3c24xx_serial_rx_chars, 0,
+ ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0,
s3c24xx_serial_portname(port), ourport);
if (ret != 0) {
- printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
+ printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq);
return ret;
}
@@ -422,12 +415,11 @@ static int s3c24xx_serial_startup(struct uart_port *port)
tx_enabled(port) = 1;
- ret = request_irq(TX_IRQ(port),
- s3c24xx_serial_tx_chars, 0,
+ ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0,
s3c24xx_serial_portname(port), ourport);
if (ret) {
- printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
+ printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq);
goto err;
}
@@ -452,6 +444,8 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
+ ourport->pm_level = level;
+
switch (level) {
case 3:
if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
@@ -661,6 +655,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
ourport->clksrc = clksrc;
ourport->baudclk = clk;
+ ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
switch (termios->c_cflag & CSIZE) {
@@ -752,6 +747,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
return "S3C2440";
case PORT_S3C2412:
return "S3C2412";
+ case PORT_S3C6400:
+ return "S3C6400/10";
default:
return NULL;
}
@@ -827,14 +824,14 @@ static struct uart_ops s3c24xx_serial_ops = {
static struct uart_driver s3c24xx_uart_drv = {
.owner = THIS_MODULE,
.dev_name = "s3c2410_serial",
- .nr = 3,
+ .nr = CONFIG_SERIAL_SAMSUNG_UARTS,
.cons = S3C24XX_SERIAL_CONSOLE,
.driver_name = S3C24XX_SERIAL_NAME,
.major = S3C24XX_SERIAL_MAJOR,
.minor = S3C24XX_SERIAL_MINOR,
};
-static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
+static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
[0] = {
.port = {
.lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
@@ -859,7 +856,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
.line = 1,
}
},
-#if NR_PORTS > 2
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 2
[2] = {
.port = {
@@ -872,6 +869,20 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
.flags = UPF_BOOT_AUTOCONF,
.line = 2,
}
+ },
+#endif
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+ [3] = {
+ .port = {
+ .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock),
+ .iotype = UPIO_MEM,
+ .irq = IRQ_S3CUART_RX3,
+ .uartclk = 0,
+ .fifosize = 16,
+ .ops = &s3c24xx_serial_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 3,
+ }
}
#endif
};
@@ -890,6 +901,89 @@ static inline int s3c24xx_serial_resetport(struct uart_port *port,
return (info->reset_port)(port, cfg);
}
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct s3c24xx_uart_port *port;
+ struct uart_port *uport;
+
+ port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
+ uport = &port->port;
+
+ /* check to see if port is enabled */
+
+ if (port->pm_level != 0)
+ return 0;
+
+ /* try and work out if the baudrate is changing, we can detect
+ * a change in rate, but we do not have support for detecting
+ * a disturbance in the clock-rate over the change.
+ */
+
+ if (IS_ERR(port->clk))
+ goto exit;
+
+ if (port->baudclk_rate == clk_get_rate(port->clk))
+ goto exit;
+
+ if (val == CPUFREQ_PRECHANGE) {
+ /* we should really shut the port down whilst the
+ * frequency change is in progress. */
+
+ } else if (val == CPUFREQ_POSTCHANGE) {
+ struct ktermios *termios;
+ struct tty_struct *tty;
+
+ if (uport->info == NULL)
+ goto exit;
+
+ tty = uport->info->port.tty;
+
+ if (tty == NULL)
+ goto exit;
+
+ termios = tty->termios;
+
+ if (termios == NULL) {
+ printk(KERN_WARNING "%s: no termios?\n", __func__);
+ goto exit;
+ }
+
+ s3c24xx_serial_set_termios(uport, termios, NULL);
+ }
+
+ exit:
+ return 0;
+}
+
+static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+ port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
+
+ return cpufreq_register_notifier(&port->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+ cpufreq_unregister_notifier(&port->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+ return 0;
+}
+
+static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+}
+#endif
+
/* s3c24xx_serial_init_port
*
* initialise a single serial port from the platform device given
@@ -914,8 +1008,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
if (port->mapbase != 0)
return 0;
- if (cfg->hwport > 3)
- return -EINVAL;
+ if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) {
+ printk(KERN_ERR "%s: port %d bigger than %d\n", __func__,
+ cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS);
+ return -ERANGE;
+ }
/* setup info for port */
port->dev = &platdev->dev;
@@ -943,18 +1040,26 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
- port->mapbase = res->start;
- port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
+ port->mapbase = res->start;
+ port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000);
ret = platform_get_irq(platdev, 0);
if (ret < 0)
port->irq = 0;
- else
+ else {
port->irq = ret;
+ ourport->rx_irq = ret;
+ ourport->tx_irq = ret + 1;
+ }
+
+ ret = platform_get_irq(platdev, 1);
+ if (ret > 0)
+ ourport->tx_irq = ret;
ourport->clk = clk_get(&platdev->dev, "uart");
- dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
- port->mapbase, port->membase, port->irq, port->uartclk);
+ dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n",
+ port->mapbase, port->membase, port->irq,
+ ourport->rx_irq, ourport->tx_irq, port->uartclk);
/* reset the fifos (and setup the uart) */
s3c24xx_serial_resetport(port, cfg);
@@ -1002,6 +1107,10 @@ int s3c24xx_serial_probe(struct platform_device *dev,
if (ret < 0)
printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
+ ret = s3c24xx_serial_cpufreq_register(ourport);
+ if (ret < 0)
+ dev_err(&dev->dev, "failed to add cpufreq notifier\n");
+
return 0;
probe_err:
@@ -1015,6 +1124,7 @@ int s3c24xx_serial_remove(struct platform_device *dev)
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
if (port) {
+ s3c24xx_serial_cpufreq_deregister(to_ourport(port));
device_remove_file(&dev->dev, &dev_attr_clock_source);
uart_remove_one_port(&s3c24xx_uart_drv, port);
}
@@ -1219,7 +1329,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
platdev_ptr = s3c24xx_uart_devs;
- for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
}
@@ -1240,7 +1350,7 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
/* is this a valid port */
- if (co->index == -1 || co->index >= NR_PORTS)
+ if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
co->index = 0;
port = &s3c24xx_serial_ports[co->index].port;
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 5c92ebbe7d9..571d6b90d20 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -33,12 +33,21 @@ struct s3c24xx_uart_info {
struct s3c24xx_uart_port {
unsigned char rx_claimed;
unsigned char tx_claimed;
+ unsigned int pm_level;
+ unsigned long baudclk_rate;
+
+ unsigned int rx_irq;
+ unsigned int tx_irq;
struct s3c24xx_uart_info *info;
struct s3c24xx_uart_clksrc *clksrc;
struct clk *clk;
struct clk *baudclk;
struct uart_port port;
+
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
};
/* conversion functions */
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 874786a11fe..42f4e66fcca 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -50,7 +50,7 @@ static struct lock_class_key port_lock_key;
#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
-#define uart_users(state) ((state)->count + ((state)->info ? (state)->info->port.blocked_open : 0))
+#define uart_users(state) ((state)->count + (state)->info.port.blocked_open)
#ifdef CONFIG_SERIAL_CORE_CONSOLE
#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line)
@@ -94,7 +94,7 @@ static void __uart_start(struct tty_struct *tty)
struct uart_state *state = tty->driver_data;
struct uart_port *port = state->port;
- if (!uart_circ_empty(&state->info->xmit) && state->info->xmit.buf &&
+ if (!uart_circ_empty(&state->info.xmit) && state->info.xmit.buf &&
!tty->stopped && !tty->hw_stopped)
port->ops->start_tx(port);
}
@@ -113,7 +113,7 @@ static void uart_start(struct tty_struct *tty)
static void uart_tasklet_action(unsigned long data)
{
struct uart_state *state = (struct uart_state *)data;
- tty_wakeup(state->info->port.tty);
+ tty_wakeup(state->info.port.tty);
}
static inline void
@@ -139,7 +139,7 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
*/
static int uart_startup(struct uart_state *state, int init_hw)
{
- struct uart_info *info = state->info;
+ struct uart_info *info = &state->info;
struct uart_port *port = state->port;
unsigned long page;
int retval = 0;
@@ -212,14 +212,15 @@ static int uart_startup(struct uart_state *state, int init_hw)
*/
static void uart_shutdown(struct uart_state *state)
{
- struct uart_info *info = state->info;
+ struct uart_info *info = &state->info;
struct uart_port *port = state->port;
+ struct tty_struct *tty = info->port.tty;
/*
* Set the TTY IO error marker
*/
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ if (tty)
+ set_bit(TTY_IO_ERROR, &tty->flags);
if (info->flags & UIF_INITIALIZED) {
info->flags &= ~UIF_INITIALIZED;
@@ -227,7 +228,7 @@ static void uart_shutdown(struct uart_state *state)
/*
* Turn off DTR and RTS early.
*/
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
+ if (!tty || (tty->termios->c_cflag & HUPCL))
uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
/*
@@ -427,7 +428,7 @@ EXPORT_SYMBOL(uart_get_divisor);
static void
uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
{
- struct tty_struct *tty = state->info->port.tty;
+ struct tty_struct *tty = state->info.port.tty;
struct uart_port *port = state->port;
struct ktermios *termios;
@@ -444,14 +445,14 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
* Set flags based on termios cflag
*/
if (termios->c_cflag & CRTSCTS)
- state->info->flags |= UIF_CTS_FLOW;
+ state->info.flags |= UIF_CTS_FLOW;
else
- state->info->flags &= ~UIF_CTS_FLOW;
+ state->info.flags &= ~UIF_CTS_FLOW;
if (termios->c_cflag & CLOCAL)
- state->info->flags &= ~UIF_CHECK_CD;
+ state->info.flags &= ~UIF_CHECK_CD;
else
- state->info->flags |= UIF_CHECK_CD;
+ state->info.flags |= UIF_CHECK_CD;
port->ops->set_termios(port, termios, old_termios);
}
@@ -479,7 +480,7 @@ static int uart_put_char(struct tty_struct *tty, unsigned char ch)
{
struct uart_state *state = tty->driver_data;
- return __uart_put_char(state->port, &state->info->xmit, ch);
+ return __uart_put_char(state->port, &state->info.xmit, ch);
}
static void uart_flush_chars(struct tty_struct *tty)
@@ -500,13 +501,13 @@ uart_write(struct tty_struct *tty, const unsigned char *buf, int count)
* This means you called this function _after_ the port was
* closed. No cookie for you.
*/
- if (!state || !state->info) {
+ if (!state) {
WARN_ON(1);
return -EL3HLT;
}
port = state->port;
- circ = &state->info->xmit;
+ circ = &state->info.xmit;
if (!circ->buf)
return 0;
@@ -537,7 +538,7 @@ static int uart_write_room(struct tty_struct *tty)
int ret;
spin_lock_irqsave(&state->port->lock, flags);
- ret = uart_circ_chars_free(&state->info->xmit);
+ ret = uart_circ_chars_free(&state->info.xmit);
spin_unlock_irqrestore(&state->port->lock, flags);
return ret;
}
@@ -549,7 +550,7 @@ static int uart_chars_in_buffer(struct tty_struct *tty)
int ret;
spin_lock_irqsave(&state->port->lock, flags);
- ret = uart_circ_chars_pending(&state->info->xmit);
+ ret = uart_circ_chars_pending(&state->info.xmit);
spin_unlock_irqrestore(&state->port->lock, flags);
return ret;
}
@@ -564,7 +565,7 @@ static void uart_flush_buffer(struct tty_struct *tty)
* This means you called this function _after_ the port was
* closed. No cookie for you.
*/
- if (!state || !state->info) {
+ if (!state) {
WARN_ON(1);
return;
}
@@ -573,7 +574,7 @@ static void uart_flush_buffer(struct tty_struct *tty)
pr_debug("uart_flush_buffer(%d) called\n", tty->index);
spin_lock_irqsave(&port->lock, flags);
- uart_circ_clear(&state->info->xmit);
+ uart_circ_clear(&state->info.xmit);
if (port->ops->flush_buffer)
port->ops->flush_buffer(port);
spin_unlock_irqrestore(&port->lock, flags);
@@ -837,15 +838,15 @@ static int uart_set_info(struct uart_state *state,
state->closing_wait = closing_wait;
if (new_serial.xmit_fifo_size)
port->fifosize = new_serial.xmit_fifo_size;
- if (state->info->port.tty)
- state->info->port.tty->low_latency =
+ if (state->info.port.tty)
+ state->info.port.tty->low_latency =
(port->flags & UPF_LOW_LATENCY) ? 1 : 0;
check_and_exit:
retval = 0;
if (port->type == PORT_UNKNOWN)
goto exit;
- if (state->info->flags & UIF_INITIALIZED) {
+ if (state->info.flags & UIF_INITIALIZED) {
if (((old_flags ^ port->flags) & UPF_SPD_MASK) ||
old_custom_divisor != port->custom_divisor) {
/*
@@ -858,7 +859,7 @@ static int uart_set_info(struct uart_state *state,
printk(KERN_NOTICE
"%s sets custom speed on %s. This "
"is deprecated.\n", current->comm,
- tty_name(state->info->port.tty, buf));
+ tty_name(state->info.port.tty, buf));
}
uart_change_speed(state, NULL);
}
@@ -889,8 +890,8 @@ static int uart_get_lsr_info(struct uart_state *state,
* interrupt happens).
*/
if (port->x_char ||
- ((uart_circ_chars_pending(&state->info->xmit) > 0) &&
- !state->info->port.tty->stopped && !state->info->port.tty->hw_stopped))
+ ((uart_circ_chars_pending(&state->info.xmit) > 0) &&
+ !state->info.port.tty->stopped && !state->info.port.tty->hw_stopped))
result &= ~TIOCSER_TEMT;
return put_user(result, value);
@@ -1017,7 +1018,7 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
port->ops->enable_ms(port);
spin_unlock_irq(&port->lock);
- add_wait_queue(&state->info->delta_msr_wait, &wait);
+ add_wait_queue(&state->info.delta_msr_wait, &wait);
for (;;) {
spin_lock_irq(&port->lock);
memcpy(&cnow, &port->icount, sizeof(struct uart_icount));
@@ -1045,7 +1046,7 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
}
current->state = TASK_RUNNING;
- remove_wait_queue(&state->info->delta_msr_wait, &wait);
+ remove_wait_queue(&state->info.delta_msr_wait, &wait);
return ret;
}
@@ -1241,7 +1242,7 @@ static void uart_set_termios(struct tty_struct *tty,
*/
if (!(old_termios->c_cflag & CLOCAL) &&
(tty->termios->c_cflag & CLOCAL))
- wake_up_interruptible(&state->info->port.open_wait);
+ wake_up_interruptible(&info->port.open_wait);
#endif
}
@@ -1303,7 +1304,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
* At this point, we stop accepting input. To do this, we
* disable the receive line status interrupts.
*/
- if (state->info->flags & UIF_INITIALIZED) {
+ if (state->info.flags & UIF_INITIALIZED) {
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
port->ops->stop_rx(port);
@@ -1322,9 +1323,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
tty_ldisc_flush(tty);
tty->closing = 0;
- state->info->port.tty = NULL;
+ state->info.port.tty = NULL;
- if (state->info->port.blocked_open) {
+ if (state->info.port.blocked_open) {
if (state->close_delay)
msleep_interruptible(state->close_delay);
} else if (!uart_console(port)) {
@@ -1334,8 +1335,8 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
/*
* Wake up anyone trying to open this port.
*/
- state->info->flags &= ~UIF_NORMAL_ACTIVE;
- wake_up_interruptible(&state->info->port.open_wait);
+ state->info.flags &= ~UIF_NORMAL_ACTIVE;
+ wake_up_interruptible(&state->info.port.open_wait);
done:
mutex_unlock(&state->mutex);
@@ -1409,19 +1410,20 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
static void uart_hangup(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
+ struct uart_info *info = &state->info;
BUG_ON(!kernel_locked());
pr_debug("uart_hangup(%d)\n", state->port->line);
mutex_lock(&state->mutex);
- if (state->info && state->info->flags & UIF_NORMAL_ACTIVE) {
+ if (info->flags & UIF_NORMAL_ACTIVE) {
uart_flush_buffer(tty);
uart_shutdown(state);
state->count = 0;
- state->info->flags &= ~UIF_NORMAL_ACTIVE;
- state->info->port.tty = NULL;
- wake_up_interruptible(&state->info->port.open_wait);
- wake_up_interruptible(&state->info->delta_msr_wait);
+ info->flags &= ~UIF_NORMAL_ACTIVE;
+ info->port.tty = NULL;
+ wake_up_interruptible(&info->port.open_wait);
+ wake_up_interruptible(&info->delta_msr_wait);
}
mutex_unlock(&state->mutex);
}
@@ -1434,7 +1436,7 @@ static void uart_hangup(struct tty_struct *tty)
*/
static void uart_update_termios(struct uart_state *state)
{
- struct tty_struct *tty = state->info->port.tty;
+ struct tty_struct *tty = state->info.port.tty;
struct uart_port *port = state->port;
if (uart_console(port) && port->cons->cflag) {
@@ -1469,7 +1471,7 @@ static int
uart_block_til_ready(struct file *filp, struct uart_state *state)
{
DECLARE_WAITQUEUE(wait, current);
- struct uart_info *info = state->info;
+ struct uart_info *info = &state->info;
struct uart_port *port = state->port;
unsigned int mctrl;
@@ -1563,28 +1565,6 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
ret = -ENXIO;
goto err_unlock;
}
-
- /* BKL: RACE HERE - LEAK */
- /* We should move this into the uart_state structure and kill off
- this whole complexity */
- if (!state->info) {
- state->info = kzalloc(sizeof(struct uart_info), GFP_KERNEL);
- if (state->info) {
- init_waitqueue_head(&state->info->port.open_wait);
- init_waitqueue_head(&state->info->delta_msr_wait);
-
- /*
- * Link the info into the other structures.
- */
- state->port->info = state->info;
-
- tasklet_init(&state->info->tlet, uart_tasklet_action,
- (unsigned long)state);
- } else {
- ret = -ENOMEM;
- goto err_unlock;
- }
- }
return state;
err_unlock:
@@ -1641,9 +1621,10 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
* Any failures from here onwards should not touch the count.
*/
tty->driver_data = state;
+ state->port->info = &state->info;
tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0;
tty->alt_speed = 0;
- state->info->port.tty = tty;
+ state->info.port.tty = tty;
/*
* If the port is in the middle of closing, bail out now.
@@ -1676,8 +1657,8 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
/*
* If this is the first open to succeed, adjust things to suit.
*/
- if (retval == 0 && !(state->info->flags & UIF_NORMAL_ACTIVE)) {
- state->info->flags |= UIF_NORMAL_ACTIVE;
+ if (retval == 0 && !(state->info.flags & UIF_NORMAL_ACTIVE)) {
+ state->info.flags |= UIF_NORMAL_ACTIVE;
uart_update_termios(state);
}
@@ -2028,11 +2009,11 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
}
port->suspended = 1;
- if (state->info && state->info->flags & UIF_INITIALIZED) {
+ if (state->info.flags & UIF_INITIALIZED) {
const struct uart_ops *ops = port->ops;
int tries;
- state->info->flags = (state->info->flags & ~UIF_INITIALIZED)
+ state->info.flags = (state->info.flags & ~UIF_INITIALIZED)
| UIF_SUSPENDED;
spin_lock_irq(&port->lock);
@@ -2049,7 +2030,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
if (!tries)
printk(KERN_ERR "%s%s%s%d: Unable to drain "
"transmitter\n",
- port->dev ? port->dev->bus_id : "",
+ port->dev ? dev_name(port->dev) : "",
port->dev ? ": " : "",
drv->dev_name,
drv->tty_driver->name_base + port->line);
@@ -2107,15 +2088,15 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
/*
* If that's unset, use the tty termios setting.
*/
- if (state->info && state->info->port.tty && termios.c_cflag == 0)
- termios = *state->info->port.tty->termios;
+ if (state->info.port.tty && termios.c_cflag == 0)
+ termios = *state->info.port.tty->termios;
uart_change_pm(state, 0);
port->ops->set_termios(port, &termios, NULL);
console_start(port->cons);
}
- if (state->info && state->info->flags & UIF_SUSPENDED) {
+ if (state->info.flags & UIF_SUSPENDED) {
const struct uart_ops *ops = port->ops;
int ret;
@@ -2130,7 +2111,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
ops->set_mctrl(port, port->mctrl);
ops->start_tx(port);
spin_unlock_irq(&port->lock);
- state->info->flags |= UIF_INITIALIZED;
+ state->info.flags |= UIF_INITIALIZED;
} else {
/*
* Failed to resume - maybe hardware went away?
@@ -2140,7 +2121,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
uart_shutdown(state);
}
- state->info->flags &= ~UIF_SUSPENDED;
+ state->info.flags &= ~UIF_SUSPENDED;
}
mutex_unlock(&state->mutex);
@@ -2175,7 +2156,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
}
printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n",
- port->dev ? port->dev->bus_id : "",
+ port->dev ? dev_name(port->dev) : "",
port->dev ? ": " : "",
drv->dev_name,
drv->tty_driver->name_base + port->line,
@@ -2198,11 +2179,14 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
* Now do the auto configuration stuff. Note that config_port
* is expected to claim the resources and map the port for us.
*/
- flags = UART_CONFIG_TYPE;
+ flags = 0;
if (port->flags & UPF_AUTO_IRQ)
flags |= UART_CONFIG_IRQ;
if (port->flags & UPF_BOOT_AUTOCONF) {
- port->type = PORT_UNKNOWN;
+ if (!(port->flags & UPF_FIXED_TYPE)) {
+ port->type = PORT_UNKNOWN;
+ flags |= UART_CONFIG_TYPE;
+ }
port->ops->config_port(port, flags);
}
@@ -2383,8 +2367,12 @@ int uart_register_driver(struct uart_driver *drv)
state->close_delay = 500; /* .5 seconds */
state->closing_wait = 30000; /* 30 seconds */
-
mutex_init(&state->mutex);
+
+ tty_port_init(&state->info.port);
+ init_waitqueue_head(&state->info.delta_msr_wait);
+ tasklet_init(&state->info.tlet, uart_tasklet_action,
+ (unsigned long)state);
}
retval = tty_register_driver(normal);
@@ -2455,7 +2443,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
state->pm_state = -1;
port->cons = drv->cons;
- port->info = state->info;
+ port->info = &state->info;
/*
* If this port is a console, then the spinlock is already
@@ -2527,18 +2515,11 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
*/
tty_unregister_device(drv->tty_driver, port->line);
- info = state->info;
+ info = &state->info;
if (info && info->port.tty)
tty_vhangup(info->port.tty);
/*
- * All users of this port should now be disconnected from
- * this driver, and the port shut down. We should be the
- * only thread fiddling with this port from now on.
- */
- state->info = NULL;
-
- /*
* Free the port IO and memory resources, if any.
*/
if (port->type != PORT_UNKNOWN)
@@ -2552,10 +2533,8 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
/*
* Kill the tasklet, and free resources.
*/
- if (info) {
+ if (info)
tasklet_kill(&info->tlet);
- kfree(info);
- }
state->port = NULL;
mutex_unlock(&port_mutex);
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index 61dc8b3daa2..a7bf024a828 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -41,9 +41,10 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
+#include <mach/hardware.h>
#define DEV_MAJOR 204
#define DEV_MINOR 16
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 165fc010978..557b54ab2f2 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -51,7 +51,6 @@
#ifdef CONFIG_SUPERH
#include <asm/clock.h>
#include <asm/sh_bios.h>
-#include <asm/kgdb.h>
#endif
#include "sh-sci.h"
@@ -65,10 +64,6 @@ struct sci_port {
/* Port IRQs: ERI, RXI, TXI, BRI (optional) */
unsigned int irqs[SCIx_NR_IRQS];
- /* Port pin configuration */
- void (*init_pins)(struct uart_port *port,
- unsigned int cflag);
-
/* Port enable callback */
void (*enable)(struct uart_port *port);
@@ -85,10 +80,6 @@ struct sci_port {
#endif
};
-#ifdef CONFIG_SH_KGDB
-static struct sci_port *kgdb_sci_port;
-#endif
-
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
static struct sci_port *serial_console_port;
#endif
@@ -101,21 +92,26 @@ static void sci_stop_tx(struct uart_port *port);
static struct sci_port sci_ports[SCI_NPORTS];
static struct uart_driver sci_uart_driver;
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && \
- defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+static inline struct sci_port *
+to_sci_port(struct uart_port *uart)
+{
+ return container_of(uart, struct sci_port, port);
+}
+
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+
+#ifdef CONFIG_CONSOLE_POLL
static inline void handle_error(struct uart_port *port)
{
/* Clear error flags */
sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
}
-static int get_char(struct uart_port *port)
+static int sci_poll_get_char(struct uart_port *port)
{
- unsigned long flags;
unsigned short status;
int c;
- spin_lock_irqsave(&port->lock, flags);
do {
status = sci_in(port, SCxSR);
if (status & SCxSR_ERRORS(port)) {
@@ -123,23 +119,21 @@ static int get_char(struct uart_port *port)
continue;
}
} while (!(status & SCxSR_RDxF(port)));
+
c = sci_in(port, SCxRDR);
- sci_in(port, SCxSR); /* Dummy read */
+
+ /* Dummy read */
+ sci_in(port, SCxSR);
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
- spin_unlock_irqrestore(&port->lock, flags);
return c;
}
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
+#endif
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || defined(CONFIG_SH_KGDB)
-static void put_char(struct uart_port *port, char c)
+static void sci_poll_put_char(struct uart_port *port, unsigned char c)
{
- unsigned long flags;
unsigned short status;
- spin_lock_irqsave(&port->lock, flags);
-
do {
status = sci_in(port, SCxSR);
} while (!(status & SCxSR_TDxE(port)));
@@ -147,96 +141,22 @@ static void put_char(struct uart_port *port, char c)
sci_in(port, SCxSR); /* Dummy read */
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
sci_out(port, SCxTDR, c);
-
- spin_unlock_irqrestore(&port->lock, flags);
}
-#endif
-
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static void put_string(struct sci_port *sci_port, const char *buffer, int count)
-{
- struct uart_port *port = &sci_port->port;
- const unsigned char *p = buffer;
- int i;
-
-#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
- int checksum;
- int usegdb=0;
-
-#ifdef CONFIG_SH_STANDARD_BIOS
- /* This call only does a trap the first time it is
- * called, and so is safe to do here unconditionally
- */
- usegdb |= sh_bios_in_gdb_mode();
-#endif
-#ifdef CONFIG_SH_KGDB
- usegdb |= (kgdb_in_gdb_mode && (sci_port == kgdb_sci_port));
-#endif
-
- if (usegdb) {
- /* $<packet info>#<checksum>. */
- do {
- unsigned char c;
- put_char(port, '$');
- put_char(port, 'O'); /* 'O'utput to console */
- checksum = 'O';
-
- for (i=0; i<count; i++) { /* Don't use run length encoding */
- int h, l;
-
- c = *p++;
- h = hex_asc_hi(c);
- l = hex_asc_lo(c);
- put_char(port, h);
- put_char(port, l);
- checksum += h + l;
- }
- put_char(port, '#');
- put_char(port, hex_asc_hi(checksum));
- put_char(port, hex_asc_lo(checksum));
- } while (get_char(port) != '+');
- } else
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
- for (i=0; i<count; i++) {
- if (*p == 10)
- put_char(port, '\r');
- put_char(port, *p++);
- }
-}
-#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
-
-#ifdef CONFIG_SH_KGDB
-static int kgdb_sci_getchar(void)
-{
- int c;
-
- /* Keep trying to read a character, this could be neater */
- while ((c = get_char(&kgdb_sci_port->port)) < 0)
- cpu_relax();
-
- return c;
-}
-
-static inline void kgdb_sci_putchar(int c)
-{
- put_char(&kgdb_sci_port->port, c);
-}
-#endif /* CONFIG_SH_KGDB */
+#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
#if defined(__H8300S__)
enum { sci_disable, sci_enable };
-static void h8300_sci_config(struct uart_port* port, unsigned int ctrl)
+static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
{
- volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL;
+ volatile unsigned char *mstpcrl = (volatile unsigned char *)MSTPCRL;
int ch = (port->mapbase - SMR0) >> 3;
unsigned char mask = 1 << (ch+1);
- if (ctrl == sci_disable) {
+ if (ctrl == sci_disable)
*mstpcrl |= mask;
- } else {
+ else
*mstpcrl &= ~mask;
- }
}
static inline void h8300_sci_enable(struct uart_port *port)
@@ -251,7 +171,7 @@ static inline void h8300_sci_disable(struct uart_port *port)
#endif
#if defined(__H8300H__) || defined(__H8300S__)
-static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
+static void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
int ch = (port->mapbase - SMR0) >> 3;
@@ -266,141 +186,99 @@ static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
/* tx mark output*/
H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
}
-#else
-#define sci_init_pins_sci NULL
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- unsigned int fcr_val = 0;
-
- if (cflag & CRTSCTS)
- fcr_val |= SCFCR_MCE;
-
- sci_out(port, SCFCR, fcr_val);
-}
-#else
-#define sci_init_pins_irda NULL
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
-{
- unsigned int fcr_val = 0;
-
- set_sh771x_scif_pfc(port);
- if (cflag & CRTSCTS) {
- fcr_val |= SCFCR_MCE;
- }
- sci_out(port, SCFCR, fcr_val);
+ if (port->mapbase == 0xA4400000) {
+ __raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
+ __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
+ } else if (port->mapbase == 0xA4410000)
+ __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- unsigned int fcr_val = 0;
unsigned short data;
if (cflag & CRTSCTS) {
/* enable RTS/CTS */
if (port->mapbase == 0xa4430000) { /* SCIF0 */
/* Clear PTCR bit 9-2; enable all scif pins but sck */
- data = ctrl_inw(PORT_PTCR);
- ctrl_outw((data & 0xfc03), PORT_PTCR);
+ data = __raw_readw(PORT_PTCR);
+ __raw_writew((data & 0xfc03), PORT_PTCR);
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
/* Clear PVCR bit 9-2 */
- data = ctrl_inw(PORT_PVCR);
- ctrl_outw((data & 0xfc03), PORT_PVCR);
+ data = __raw_readw(PORT_PVCR);
+ __raw_writew((data & 0xfc03), PORT_PVCR);
}
- fcr_val |= SCFCR_MCE;
} else {
if (port->mapbase == 0xa4430000) { /* SCIF0 */
/* Clear PTCR bit 5-2; enable only tx and rx */
- data = ctrl_inw(PORT_PTCR);
- ctrl_outw((data & 0xffc3), PORT_PTCR);
+ data = __raw_readw(PORT_PTCR);
+ __raw_writew((data & 0xffc3), PORT_PTCR);
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
/* Clear PVCR bit 5-2 */
- data = ctrl_inw(PORT_PVCR);
- ctrl_outw((data & 0xffc3), PORT_PVCR);
+ data = __raw_readw(PORT_PVCR);
+ __raw_writew((data & 0xffc3), PORT_PVCR);
}
}
- sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SH3)
/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- unsigned int fcr_val = 0;
unsigned short data;
/* We need to set SCPCR to enable RTS/CTS */
- data = ctrl_inw(SCPCR);
+ data = __raw_readw(SCPCR);
/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
- ctrl_outw(data & 0x0fcf, SCPCR);
+ __raw_writew(data & 0x0fcf, SCPCR);
- if (cflag & CRTSCTS)
- fcr_val |= SCFCR_MCE;
- else {
+ if (!(cflag & CRTSCTS)) {
/* We need to set SCPCR to enable RTS/CTS */
- data = ctrl_inw(SCPCR);
+ data = __raw_readw(SCPCR);
/* Clear out SCP7MD1,0, SCP4MD1,0,
Set SCP6MD1,0 = {01} (output) */
- ctrl_outw((data & 0x0fcf) | 0x1000, SCPCR);
+ __raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
data = ctrl_inb(SCPDR);
/* Set /RTS2 (bit6) = 0 */
ctrl_outb(data & 0xbf, SCPDR);
}
-
- sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- unsigned int fcr_val = 0;
unsigned short data;
if (port->mapbase == 0xffe00000) {
- data = ctrl_inw(PSCR);
+ data = __raw_readw(PSCR);
data &= ~0x03cf;
- if (cflag & CRTSCTS)
- fcr_val |= SCFCR_MCE;
- else
+ if (!(cflag & CRTSCTS))
data |= 0x0340;
- ctrl_outw(data, PSCR);
+ __raw_writew(data, PSCR);
}
- /* SCIF1 and SCIF2 should be setup by board code */
-
- sci_out(port, SCFCR, fcr_val);
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
- /* Nothing to do here.. */
- sci_out(port, SCFCR, 0);
}
-#else
-/* For SH7750 */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
- unsigned int fcr_val = 0;
-
- if (cflag & CRTSCTS) {
- fcr_val |= SCFCR_MCE;
- } else {
-#if defined(CONFIG_CPU_SUBTYPE_SH7343) || defined(CONFIG_CPU_SUBTYPE_SH7366)
- /* Nothing */
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785) || \
defined(CONFIG_CPU_SUBTYPE_SHX3)
- ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+ if (!(cflag & CRTSCTS))
+ __raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */
+}
+#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+ if (!(cflag & CRTSCTS))
+ __raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */
+}
#else
- ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
-#endif
- }
- sci_out(port, SCFCR, fcr_val);
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+ /* Nothing to do */
}
#endif
@@ -419,18 +297,26 @@ static inline int scif_rxroom(struct uart_port *port)
#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
static inline int scif_txroom(struct uart_port *port)
{
- if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+ if ((port->mapbase == 0xffe00000) ||
+ (port->mapbase == 0xffe08000)) {
+ /* SCIF0/1*/
return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
- else /* SCIF2 */
+ } else {
+ /* SCIF2 */
return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
+ }
}
static inline int scif_rxroom(struct uart_port *port)
{
- if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+ if ((port->mapbase == 0xffe00000) ||
+ (port->mapbase == 0xffe08000)) {
+ /* SCIF0/1*/
return sci_in(port, SCRFDR) & 0xff;
- else /* SCIF2 */
+ } else {
+ /* SCIF2 */
return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
+ }
}
#else
static inline int scif_txroom(struct uart_port *port)
@@ -446,12 +332,12 @@ static inline int scif_rxroom(struct uart_port *port)
static inline int sci_txroom(struct uart_port *port)
{
- return ((sci_in(port, SCxSR) & SCI_TDRE) != 0);
+ return (sci_in(port, SCxSR) & SCI_TDRE) != 0;
}
static inline int sci_rxroom(struct uart_port *port)
{
- return ((sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0);
+ return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
}
/* ********************************************************************** *
@@ -469,11 +355,10 @@ static void sci_transmit_chars(struct uart_port *port)
status = sci_in(port, SCxSR);
if (!(status & SCxSR_TDxE(port))) {
ctrl = sci_in(port, SCSCR);
- if (uart_circ_empty(xmit)) {
+ if (uart_circ_empty(xmit))
ctrl &= ~SCI_CTRL_FLAGS_TIE;
- } else {
+ else
ctrl |= SCI_CTRL_FLAGS_TIE;
- }
sci_out(port, SCSCR, ctrl);
return;
}
@@ -521,11 +406,11 @@ static void sci_transmit_chars(struct uart_port *port)
}
/* On SH3, SCIF may read end-of-break as a space->mark char */
-#define STEPFN(c) ({int __c=(c); (((__c-1)|(__c)) == -1); })
+#define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); })
static inline void sci_receive_chars(struct uart_port *port)
{
- struct sci_port *sci_port = (struct sci_port *)port;
+ struct sci_port *sci_port = to_sci_port(port);
struct tty_struct *tty = port->info->port.tty;
int i, count, copied = 0;
unsigned short status;
@@ -550,13 +435,13 @@ static inline void sci_receive_chars(struct uart_port *port)
if (port->type == PORT_SCI) {
char c = sci_in(port, SCxRDR);
- if (uart_handle_sysrq_char(port, c) || sci_port->break_flag)
+ if (uart_handle_sysrq_char(port, c) ||
+ sci_port->break_flag)
count = 0;
- else {
+ else
tty_insert_flip_char(tty, c, TTY_NORMAL);
- }
} else {
- for (i=0; i<count; i++) {
+ for (i = 0; i < count; i++) {
char c = sci_in(port, SCxRDR);
status = sci_in(port, SCxSR);
#if defined(CONFIG_CPU_SH3)
@@ -569,7 +454,7 @@ static inline void sci_receive_chars(struct uart_port *port)
}
/* Nonzero => end-of-break */
- pr_debug("scif: debounce<%02x>\n", c);
+ dev_dbg(port->dev, "debounce<%02x>\n", c);
sci_port->break_flag = 0;
if (STEPFN(c)) {
@@ -586,12 +471,13 @@ static inline void sci_receive_chars(struct uart_port *port)
/* Store data and status */
if (status&SCxSR_FER(port)) {
flag = TTY_FRAME;
- pr_debug("sci: frame error\n");
+ dev_notice(port->dev, "frame error\n");
} else if (status&SCxSR_PER(port)) {
flag = TTY_PARITY;
- pr_debug("sci: parity error\n");
+ dev_notice(port->dev, "parity error\n");
} else
flag = TTY_NORMAL;
+
tty_insert_flip_char(tty, c, flag);
}
}
@@ -651,13 +537,14 @@ static inline int sci_handle_errors(struct uart_port *port)
/* overrun error */
if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
copied++;
- pr_debug("sci: overrun error\n");
+
+ dev_notice(port->dev, "overrun error");
}
if (status & SCxSR_FER(port)) {
if (sci_rxd_in(port) == 0) {
/* Notify of BREAK */
- struct sci_port *sci_port = (struct sci_port *)port;
+ struct sci_port *sci_port = to_sci_port(port);
if (!sci_port->break_flag) {
sci_port->break_flag = 1;
@@ -666,15 +553,19 @@ static inline int sci_handle_errors(struct uart_port *port)
/* Do sysrq handling. */
if (uart_handle_break(port))
return 0;
- pr_debug("sci: BREAK detected\n");
+
+ dev_dbg(port->dev, "BREAK detected\n");
+
if (tty_insert_flip_char(tty, 0, TTY_BREAK))
- copied++;
- }
+ copied++;
+ }
+
} else {
/* frame error */
if (tty_insert_flip_char(tty, 0, TTY_FRAME))
copied++;
- pr_debug("sci: frame error\n");
+
+ dev_notice(port->dev, "frame error\n");
}
}
@@ -682,7 +573,8 @@ static inline int sci_handle_errors(struct uart_port *port)
/* parity error */
if (tty_insert_flip_char(tty, 0, TTY_PARITY))
copied++;
- pr_debug("sci: parity error\n");
+
+ dev_notice(port->dev, "parity error");
}
if (copied)
@@ -691,6 +583,27 @@ static inline int sci_handle_errors(struct uart_port *port)
return copied;
}
+static inline int sci_handle_fifo_overrun(struct uart_port *port)
+{
+ struct tty_struct *tty = port->info->port.tty;
+ int copied = 0;
+
+ if (port->type != PORT_SCIF)
+ return 0;
+
+ if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+ sci_out(port, SCLSR, 0);
+
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ tty_flip_buffer_push(tty);
+
+ dev_notice(port->dev, "overrun error\n");
+ copied++;
+ }
+
+ return copied;
+}
+
static inline int sci_handle_breaks(struct uart_port *port)
{
int copied = 0;
@@ -709,23 +622,15 @@ static inline int sci_handle_breaks(struct uart_port *port)
/* Notify of BREAK */
if (tty_insert_flip_char(tty, 0, TTY_BREAK))
copied++;
- pr_debug("sci: BREAK detected\n");
- }
-#if defined(SCIF_ORER)
- /* XXX: Handle SCIF overrun error */
- if (port->type != PORT_SCI && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
- sci_out(port, SCLSR, 0);
- if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) {
- copied++;
- pr_debug("sci: overrun error\n");
- }
+ dev_dbg(port->dev, "BREAK detected\n");
}
-#endif
if (copied)
tty_flip_buffer_push(tty);
+ copied += sci_handle_fifo_overrun(port);
+
return copied;
}
@@ -763,16 +668,7 @@ static irqreturn_t sci_er_interrupt(int irq, void *ptr)
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
}
} else {
-#if defined(SCIF_ORER)
- if((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
- struct tty_struct *tty = port->info->port.tty;
-
- sci_out(port, SCLSR, 0);
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- tty_flip_buffer_push(tty);
- pr_debug("scif: overrun error\n");
- }
-#endif
+ sci_handle_fifo_overrun(port);
sci_rx_interrupt(irq, ptr);
}
@@ -801,8 +697,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
struct uart_port *port = ptr;
irqreturn_t ret = IRQ_NONE;
- ssr_status = sci_in(port,SCxSR);
- scr_status = sci_in(port,SCSCR);
+ ssr_status = sci_in(port, SCxSR);
+ scr_status = sci_in(port, SCSCR);
/* Tx Interrupt */
if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
@@ -820,7 +716,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
return ret;
}
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
/*
* Here we define a transistion notifier so that we can update all of our
* ports' baud rate when the peripheral clock changes.
@@ -828,41 +724,20 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
static int sci_notifier(struct notifier_block *self,
unsigned long phase, void *p)
{
- struct cpufreq_freqs *freqs = p;
int i;
if ((phase == CPUFREQ_POSTCHANGE) ||
- (phase == CPUFREQ_RESUMECHANGE)){
+ (phase == CPUFREQ_RESUMECHANGE))
for (i = 0; i < SCI_NPORTS; i++) {
- struct uart_port *port = &sci_ports[i].port;
- struct clk *clk;
-
- /*
- * Update the uartclk per-port if frequency has
- * changed, since it will no longer necessarily be
- * consistent with the old frequency.
- *
- * Really we want to be able to do something like
- * uart_change_speed() or something along those lines
- * here to implicitly reset the per-port baud rate..
- *
- * Clean this up later..
- */
- clk = clk_get(NULL, "module_clk");
- port->uartclk = clk_get_rate(clk);
- clk_put(clk);
+ struct sci_port *s = &sci_ports[i];
+ s->port.uartclk = clk_get_rate(s->clk);
}
- printk(KERN_INFO "%s: got a postchange notification "
- "for cpu %d (old %d, new %d)\n",
- __func__, freqs->cpu, freqs->old, freqs->new);
- }
-
return NOTIFY_OK;
}
static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
-#endif /* CONFIG_CPU_FREQ && CONFIG_HAVE_CLK */
+#endif
static int sci_request_irq(struct sci_port *port)
{
@@ -875,23 +750,22 @@ static int sci_request_irq(struct sci_port *port)
"SCI Transmit Data Empty", "SCI Break" };
if (port->irqs[0] == port->irqs[1]) {
- if (!port->irqs[0]) {
- printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n");
+ if (unlikely(!port->irqs[0]))
return -ENODEV;
- }
if (request_irq(port->irqs[0], sci_mpxed_interrupt,
IRQF_DISABLED, "sci", port)) {
- printk(KERN_ERR "sci: Cannot allocate irq.\n");
+ dev_err(port->port.dev, "Can't allocate IRQ\n");
return -ENODEV;
}
} else {
for (i = 0; i < ARRAY_SIZE(handlers); i++) {
- if (!port->irqs[i])
+ if (unlikely(!port->irqs[i]))
continue;
+
if (request_irq(port->irqs[i], handlers[i],
IRQF_DISABLED, desc[i], port)) {
- printk(KERN_ERR "sci: Cannot allocate irq.\n");
+ dev_err(port->port.dev, "Can't allocate IRQ\n");
return -ENODEV;
}
}
@@ -904,12 +778,9 @@ static void sci_free_irq(struct sci_port *port)
{
int i;
- if (port->irqs[0] == port->irqs[1]) {
- if (!port->irqs[0])
- printk("sci: sci_free_irq error\n");
- else
- free_irq(port->irqs[0], port);
- } else {
+ if (port->irqs[0] == port->irqs[1])
+ free_irq(port->irqs[0], port);
+ else {
for (i = 0; i < ARRAY_SIZE(port->irqs); i++) {
if (!port->irqs[i])
continue;
@@ -1028,7 +899,6 @@ static void sci_shutdown(struct uart_port *port)
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct sci_port *s = &sci_ports[port->line];
unsigned int status, baud, smr_val;
int t = -1;
@@ -1060,32 +930,36 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
sci_out(port, SCSMR, smr_val);
if (t > 0) {
- if(t >= 256) {
+ if (t >= 256) {
sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
t >>= 2;
- } else {
+ } else
sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3);
- }
+
sci_out(port, SCBRR, t);
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
}
- if (likely(s->init_pins))
- s->init_pins(port, termios->c_cflag);
+ sci_init_pins(port, termios->c_cflag);
+ sci_out(port, SCFCR, (termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0);
sci_out(port, SCSCR, SCSCR_INIT(port));
if ((termios->c_cflag & CREAD) != 0)
- sci_start_rx(port,0);
+ sci_start_rx(port, 0);
}
static const char *sci_type(struct uart_port *port)
{
switch (port->type) {
- case PORT_SCI: return "sci";
- case PORT_SCIF: return "scif";
- case PORT_IRDA: return "irda";
- case PORT_SCIFA: return "scifa";
+ case PORT_IRDA:
+ return "irda";
+ case PORT_SCI:
+ return "sci";
+ case PORT_SCIF:
+ return "scif";
+ case PORT_SCIFA:
+ return "scifa";
}
return NULL;
@@ -1108,19 +982,6 @@ static void sci_config_port(struct uart_port *port, int flags)
port->type = s->type;
- switch (port->type) {
- case PORT_SCI:
- s->init_pins = sci_init_pins_sci;
- break;
- case PORT_SCIF:
- case PORT_SCIFA:
- s->init_pins = sci_init_pins_scif;
- break;
- case PORT_IRDA:
- s->init_pins = sci_init_pins_irda;
- break;
- }
-
if (port->flags & UPF_IOREMAP && !port->membase) {
#if defined(CONFIG_SUPERH64)
port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
@@ -1129,7 +990,7 @@ static void sci_config_port(struct uart_port *port, int flags)
port->membase = ioremap_nocache(port->mapbase, 0x40);
#endif
- printk(KERN_ERR "sci: can't remap port#%d\n", port->line);
+ dev_err(port->dev, "can't remap port#%d\n", port->line);
}
}
@@ -1163,6 +1024,10 @@ static struct uart_ops sci_uart_ops = {
.request_port = sci_request_port,
.config_port = sci_config_port,
.verify_port = sci_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = sci_poll_get_char,
+ .poll_put_char = sci_poll_put_char,
+#endif
};
static void __init sci_init_ports(void)
@@ -1229,7 +1094,15 @@ int __init early_sci_setup(struct uart_port *port)
static void serial_console_write(struct console *co, const char *s,
unsigned count)
{
- put_string(serial_console_port, s, count);
+ struct uart_port *port = &serial_console_port->port;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (*s == 10)
+ sci_poll_put_char(port, '\r');
+
+ sci_poll_put_char(port, *s++);
+ }
}
static int __init serial_console_setup(struct console *co, char *options)
@@ -1307,89 +1180,8 @@ static int __init sci_console_init(void)
console_initcall(sci_console_init);
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
-#ifdef CONFIG_SH_KGDB_CONSOLE
-/*
- * FIXME: Most of this can go away.. at the moment, we rely on
- * arch/sh/kernel/setup.c to do the command line parsing for kgdb, though
- * most of that can easily be done here instead.
- *
- * For the time being, just accept the values that were parsed earlier..
- */
-static void __init kgdb_console_get_options(struct uart_port *port, int *baud,
- int *parity, int *bits)
-{
- *baud = kgdb_baud;
- *parity = tolower(kgdb_parity);
- *bits = kgdb_bits - '0';
-}
-
-/*
- * The naming here is somewhat misleading, since kgdb_console_setup() takes
- * care of the early-on initialization for kgdb, regardless of whether we
- * actually use kgdb as a console or not.
- *
- * On the plus side, this lets us kill off the old kgdb_sci_setup() nonsense.
- */
-int __init kgdb_console_setup(struct console *co, char *options)
-{
- struct uart_port *port = &sci_ports[kgdb_portnum].port;
- int baud = 38400;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (co->index != kgdb_portnum)
- co->index = kgdb_portnum;
-
- kgdb_sci_port = &sci_ports[co->index];
- port = &kgdb_sci_port->port;
-
- /*
- * Also need to check port->type, we don't actually have any
- * UPIO_PORT ports, but uart_report_port() handily misreports
- * it anyways if we don't have a port available by the time this is
- * called.
- */
- if (!port->type)
- return -ENODEV;
- if (!port->membase || !port->mapbase)
- return -ENODEV;
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- kgdb_console_get_options(port, &baud, &parity, &bits);
-
- kgdb_getchar = kgdb_sci_getchar;
- kgdb_putchar = kgdb_sci_putchar;
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct console kgdb_console = {
- .name = "ttySC",
- .device = uart_console_device,
- .write = kgdb_console_write,
- .setup = kgdb_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &sci_uart_driver,
-};
-
-/* Register the KGDB console so we get messages (d'oh!) */
-static int __init kgdb_console_init(void)
-{
- sci_init_ports();
- register_console(&kgdb_console);
- return 0;
-}
-console_initcall(kgdb_console_init);
-#endif /* CONFIG_SH_KGDB_CONSOLE */
-
-#if defined(CONFIG_SH_KGDB_CONSOLE)
-#define SCI_CONSOLE &kgdb_console
-#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
-#define SCI_CONSOLE &serial_console
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+#define SCI_CONSOLE (&serial_console)
#else
#define SCI_CONSOLE 0
#endif
@@ -1463,15 +1255,8 @@ static int __devinit sci_probe(struct platform_device *dev)
uart_add_one_port(&sci_uart_driver, &sciport->port);
}
-#if defined(CONFIG_SH_KGDB) && !defined(CONFIG_SH_KGDB_CONSOLE)
- kgdb_sci_port = &sci_ports[kgdb_portnum];
- kgdb_getchar = kgdb_sci_getchar;
- kgdb_putchar = kgdb_sci_putchar;
-#endif
-
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
- dev_info(&dev->dev, "CPU frequency notifier registered\n");
#endif
#ifdef CONFIG_SH_STANDARD_BIOS
@@ -1491,6 +1276,10 @@ static int __devexit sci_remove(struct platform_device *dev)
{
int i;
+#ifdef CONFIG_HAVE_CLK
+ cpufreq_unregister_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
for (i = 0; i < SCI_NPORTS; i++)
uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 9f33b064172..38c600c0dbb 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -133,13 +133,20 @@
# define SCSPTR5 0xffef0024 /* 16 bit SCIF */
# define SCIF_OPER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7203) || \
defined(CONFIG_CPU_SUBTYPE_SH7206) || \
defined(CONFIG_CPU_SUBTYPE_SH7263)
# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
+# if defined(CONFIG_CPU_SUBTYPE_SH7201)
+# define SCSPTR4 0xfffeA020 /* 16 bit SCIF */
+# define SCSPTR5 0xfffeA820 /* 16 bit SCIF */
+# define SCSPTR6 0xfffeB020 /* 16 bit SCIF */
+# define SCSPTR7 0xfffeB820 /* 16 bit SCIF */
+# endif
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
# define SCSPTR0 0xf8400020 /* 16 bit SCIF */
@@ -225,6 +232,10 @@
# define SCIF_TXROOM_MAX 16
#endif
+#ifndef SCIF_ORER
+#define SCIF_ORER 0x0000
+#endif
+
#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
@@ -232,12 +243,7 @@
#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER)
#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
-#else
-# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
-#endif
+#define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
@@ -501,18 +507,6 @@ static inline int sci_rxd_in(struct uart_port *port)
{
return sci_in(port,SCxSR)&0x0010 ? 1 : 0;
}
-static inline void set_sh771x_scif_pfc(struct uart_port *port)
-{
- if (port->mapbase == 0xA4400000){
- ctrl_outw(ctrl_inw(PACR)&0xffc0,PACR);
- ctrl_outw(ctrl_inw(PBCR)&0x0fff,PBCR);
- return;
- }
- if (port->mapbase == 0xA4410000){
- ctrl_outw(ctrl_inw(PBCR)&0xf003,PBCR);
- return;
- }
-}
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
static inline int sci_rxd_in(struct uart_port *port)
@@ -664,7 +658,8 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7203) || \
defined(CONFIG_CPU_SUBTYPE_SH7206) || \
defined(CONFIG_CPU_SUBTYPE_SH7263)
static inline int sci_rxd_in(struct uart_port *port)
@@ -677,6 +672,16 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfffe9800)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+#if defined(CONFIG_CPU_SUBTYPE_SH7201)
+ if (port->mapbase == 0xfffeA000)
+ return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xfffeA800)
+ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xfffeB000)
+ return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xfffeB800)
+ return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+#endif
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 18:56:47 +0000