diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmsmac/aiutils.c')
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/aiutils.c | 126 |
1 files changed, 2 insertions, 124 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c index ebec0a28b31..bcefe675945 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c @@ -320,7 +320,6 @@ #define IS_SIM(chippkg) \ ((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID)) -#define PCI(sih) (ai_get_buscoretype(sih) == PCI_CORE_ID) #define PCIE(sih) (ai_get_buscoretype(sih) == PCIE_CORE_ID) #define PCI_FORCEHT(sih) (PCIE(sih) && (ai_get_chip_id(sih) == BCM4716_CHIP_ID)) @@ -453,36 +452,9 @@ struct aidmp { u32 componentid3; /* 0xffc */ }; -/* return true if PCIE capability exists in the pci config space */ -static bool ai_ispcie(struct si_info *sii) -{ - u8 cap_ptr; - - cap_ptr = - pcicore_find_pci_capability(sii->pcibus, PCI_CAP_ID_EXP, NULL, - NULL); - if (!cap_ptr) - return false; - - return true; -} - -static bool ai_buscore_prep(struct si_info *sii) -{ - /* kludge to enable the clock on the 4306 which lacks a slowclock */ - if (!ai_ispcie(sii)) - ai_clkctl_xtal(&sii->pub, XTAL | PLL, ON); - return true; -} - static bool ai_buscore_setup(struct si_info *sii, struct bcma_device *cc) { - struct bcma_device *pci = NULL; - struct bcma_device *pcie = NULL; - struct bcma_device *core; - - /* no cores found, bail out */ if (cc->bus->nr_cores == 0) return false; @@ -504,30 +476,7 @@ ai_buscore_setup(struct si_info *sii, struct bcma_device *cc) } /* figure out buscore */ - list_for_each_entry(core, &cc->bus->cores, list) { - uint cid, crev; - - cid = core->id.id; - crev = core->id.rev; - - if (cid == PCI_CORE_ID) { - pci = core; - } else if (cid == PCIE_CORE_ID) { - pcie = core; - } - } - - if (pci && pcie) { - if (ai_ispcie(sii)) - pci = NULL; - else - pcie = NULL; - } - if (pci) { - sii->buscore = pci; - } else if (pcie) { - sii->buscore = pcie; - } + sii->buscore = ai_findcore(&sii->pub, PCIE_CORE_ID, 0); /* fixup necessary chip/core configurations */ if (!sii->pch) { @@ -557,10 +506,6 @@ static struct si_info *ai_doattach(struct si_info *sii, /* switch to Chipcommon core */ cc = pbus->drv_cc.core; - /* bus/core/clk setup for register access */ - if (!ai_buscore_prep(sii)) - return NULL; - sih->chip = pbus->chipinfo.id; sih->chiprev = pbus->chipinfo.rev; sih->chippkg = pbus->chipinfo.pkg; @@ -816,69 +761,6 @@ u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih) return fpdelay; } -/* turn primary xtal and/or pll off/on */ -int ai_clkctl_xtal(struct si_pub *sih, uint what, bool on) -{ - struct si_info *sii; - u32 in, out, outen; - - sii = (struct si_info *)sih; - - /* pcie core doesn't have any mapping to control the xtal pu */ - if (PCIE(sih)) - return -1; - - pci_read_config_dword(sii->pcibus, PCI_GPIO_IN, &in); - pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT, &out); - pci_read_config_dword(sii->pcibus, PCI_GPIO_OUTEN, &outen); - - /* - * Avoid glitching the clock if GPRS is already using it. - * We can't actually read the state of the PLLPD so we infer it - * by the value of XTAL_PU which *is* readable via gpioin. - */ - if (on && (in & PCI_CFG_GPIO_XTAL)) - return 0; - - if (what & XTAL) - outen |= PCI_CFG_GPIO_XTAL; - if (what & PLL) - outen |= PCI_CFG_GPIO_PLL; - - if (on) { - /* turn primary xtal on */ - if (what & XTAL) { - out |= PCI_CFG_GPIO_XTAL; - if (what & PLL) - out |= PCI_CFG_GPIO_PLL; - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUT, out); - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUTEN, outen); - udelay(XTAL_ON_DELAY); - } - - /* turn pll on */ - if (what & PLL) { - out &= ~PCI_CFG_GPIO_PLL; - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUT, out); - mdelay(2); - } - } else { - if (what & XTAL) - out &= ~PCI_CFG_GPIO_XTAL; - if (what & PLL) - out |= PCI_CFG_GPIO_PLL; - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUT, out); - pci_write_config_dword(sii->pcibus, - PCI_GPIO_OUTEN, outen); - } - - return 0; -} - /* clk control mechanism through chipcommon, no policy checking */ static bool _ai_clkctl_cc(struct si_info *sii, uint mode) { @@ -985,16 +867,12 @@ void ai_pci_setup(struct si_pub *sih, uint coremask) * Enable sb->pci interrupts. Assume * PCI rev 2.3 support was added in pci core rev 6 and things changed.. */ - if (PCIE(sih) || (PCI(sih) && (ai_get_buscorerev(sih) >= 6))) { + if (PCIE(sih)) { /* pci config write to set this core bit in PCIIntMask */ pci_read_config_dword(sii->pcibus, PCI_INT_MASK, &w); w |= (coremask << PCI_SBIM_SHIFT); pci_write_config_dword(sii->pcibus, PCI_INT_MASK, w); } - - if (PCI(sih)) { - pcicore_pci_setup(sii->pch); - } } /* |