diff options
Diffstat (limited to 'drivers/net/usb/catc.c')
-rw-r--r-- | drivers/net/usb/catc.c | 55 |
1 files changed, 32 insertions, 23 deletions
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c index 26c5bebd9ec..18d9579123e 100644 --- a/drivers/net/usb/catc.c +++ b/drivers/net/usb/catc.c @@ -236,7 +236,8 @@ static void catc_rx_done(struct urb *urb) } if (status) { - dbg("rx_done, status %d, length %d", status, urb->actual_length); + dev_dbg(&urb->dev->dev, "rx_done, status %d, length %d\n", + status, urb->actual_length); return; } @@ -275,10 +276,11 @@ static void catc_rx_done(struct urb *urb) if (atomic_read(&catc->recq_sz)) { int state; atomic_dec(&catc->recq_sz); - dbg("getting extra packet"); + netdev_dbg(catc->netdev, "getting extra packet\n"); urb->dev = catc->usbdev; if ((state = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { - dbg("submit(rx_urb) status %d", state); + netdev_dbg(catc->netdev, + "submit(rx_urb) status %d\n", state); } } else { clear_bit(RX_RUNNING, &catc->flags); @@ -317,18 +319,20 @@ static void catc_irq_done(struct urb *urb) return; /* -EPIPE: should clear the halt */ default: /* error */ - dbg("irq_done, status %d, data %02x %02x.", status, data[0], data[1]); + dev_dbg(&urb->dev->dev, + "irq_done, status %d, data %02x %02x.\n", + status, data[0], data[1]); goto resubmit; } if (linksts == LinkGood) { netif_carrier_on(catc->netdev); - dbg("link ok"); + netdev_dbg(catc->netdev, "link ok\n"); } if (linksts == LinkBad) { netif_carrier_off(catc->netdev); - dbg("link bad"); + netdev_dbg(catc->netdev, "link bad\n"); } if (hasdata) { @@ -385,7 +389,7 @@ static void catc_tx_done(struct urb *urb) int r, status = urb->status; if (status == -ECONNRESET) { - dbg("Tx Reset."); + dev_dbg(&urb->dev->dev, "Tx Reset.\n"); urb->status = 0; catc->netdev->trans_start = jiffies; catc->netdev->stats.tx_errors++; @@ -395,7 +399,8 @@ static void catc_tx_done(struct urb *urb) } if (status) { - dbg("tx_done, status %d, length %d", status, urb->actual_length); + dev_dbg(&urb->dev->dev, "tx_done, status %d, length %d\n", + status, urb->actual_length); return; } @@ -511,7 +516,8 @@ static void catc_ctrl_done(struct urb *urb) int status = urb->status; if (status) - dbg("ctrl_done, status %d, len %d.", status, urb->actual_length); + dev_dbg(&urb->dev->dev, "ctrl_done, status %d, len %d.\n", + status, urb->actual_length); spin_lock_irqsave(&catc->ctrl_lock, flags); @@ -667,7 +673,9 @@ static void catc_set_multicast_list(struct net_device *netdev) f5u011_mchash_async(catc, catc->multicast); if (catc->rxmode[0] != rx) { catc->rxmode[0] = rx; - dbg("Setting RX mode to %2.2X %2.2X", catc->rxmode[0], catc->rxmode[1]); + netdev_dbg(catc->netdev, + "Setting RX mode to %2.2X %2.2X\n", + catc->rxmode[0], catc->rxmode[1]); f5u011_rxmode_async(catc, catc->rxmode); } } @@ -766,6 +774,7 @@ static const struct net_device_ops catc_netdev_ops = { static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id) { + struct device *dev = &intf->dev; struct usb_device *usbdev = interface_to_usbdev(intf); struct net_device *netdev; struct catc *catc; @@ -774,7 +783,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id if (usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 1)) { - dev_err(&intf->dev, "Can't set altsetting 1.\n"); + dev_err(dev, "Can't set altsetting 1.\n"); return -EIO; } @@ -817,7 +826,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id if (le16_to_cpu(usbdev->descriptor.idVendor) == 0x0423 && le16_to_cpu(usbdev->descriptor.idProduct) == 0xa && le16_to_cpu(catc->usbdev->descriptor.bcdDevice) == 0x0130) { - dbg("Testing for f5u011"); + dev_dbg(dev, "Testing for f5u011\n"); catc->is_f5u011 = 1; atomic_set(&catc->recq_sz, 0); pktsz = RX_PKT_SZ; @@ -838,7 +847,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id catc->irq_buf, 2, catc_irq_done, catc, 1); if (!catc->is_f5u011) { - dbg("Checking memory size\n"); + dev_dbg(dev, "Checking memory size\n"); i = 0x12345678; catc_write_mem(catc, 0x7a80, &i, 4); @@ -850,7 +859,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id case 0x12345678: catc_set_reg(catc, TxBufCount, 8); catc_set_reg(catc, RxBufCount, 32); - dbg("64k Memory\n"); + dev_dbg(dev, "64k Memory\n"); break; default: dev_warn(&intf->dev, @@ -858,49 +867,49 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id case 0x87654321: catc_set_reg(catc, TxBufCount, 4); catc_set_reg(catc, RxBufCount, 16); - dbg("32k Memory\n"); + dev_dbg(dev, "32k Memory\n"); break; } - dbg("Getting MAC from SEEROM."); + dev_dbg(dev, "Getting MAC from SEEROM.\n"); catc_get_mac(catc, netdev->dev_addr); - dbg("Setting MAC into registers."); + dev_dbg(dev, "Setting MAC into registers.\n"); for (i = 0; i < 6; i++) catc_set_reg(catc, StationAddr0 - i, netdev->dev_addr[i]); - dbg("Filling the multicast list."); + dev_dbg(dev, "Filling the multicast list.\n"); memset(broadcast, 0xff, 6); catc_multicast(broadcast, catc->multicast); catc_multicast(netdev->dev_addr, catc->multicast); catc_write_mem(catc, 0xfa80, catc->multicast, 64); - dbg("Clearing error counters."); + dev_dbg(dev, "Clearing error counters.\n"); for (i = 0; i < 8; i++) catc_set_reg(catc, EthStats + i, 0); catc->last_stats = jiffies; - dbg("Enabling."); + dev_dbg(dev, "Enabling.\n"); catc_set_reg(catc, MaxBurst, RX_MAX_BURST); catc_set_reg(catc, OpModes, OpTxMerge | OpRxMerge | OpLenInclude | Op3MemWaits); catc_set_reg(catc, LEDCtrl, LEDLink); catc_set_reg(catc, RxUnit, RxEnable | RxPolarity | RxMultiCast); } else { - dbg("Performing reset\n"); + dev_dbg(dev, "Performing reset\n"); catc_reset(catc); catc_get_mac(catc, netdev->dev_addr); - dbg("Setting RX Mode"); + dev_dbg(dev, "Setting RX Mode\n"); catc->rxmode[0] = RxEnable | RxPolarity | RxMultiCast; catc->rxmode[1] = 0; f5u011_rxmode(catc, catc->rxmode); } - dbg("Init done."); + dev_dbg(dev, "Init done.\n"); printk(KERN_INFO "%s: %s USB Ethernet at usb-%s-%s, %pM.\n", netdev->name, (catc->is_f5u011) ? "Belkin F5U011" : "CATC EL1210A NetMate", usbdev->bus->bus_name, usbdev->devpath, netdev->dev_addr); |