diff options
Diffstat (limited to 'arch/ppc/boot')
78 files changed, 0 insertions, 11878 deletions
diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile deleted file mode 100644 index 500497e3c72..00000000000 --- a/arch/ppc/boot/Makefile +++ /dev/null @@ -1,37 +0,0 @@ -# -# arch/ppc/boot/Makefile -# -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1994 by Linus Torvalds -# Adapted for PowerPC by Gary Thomas -# modified by Cort (cort@cs.nmt.edu) -# - -# KBUILD_CFLAGS used when building rest of boot (takes effect recursively) -KBUILD_CFLAGS += -fno-builtin -D__BOOTER__ -Iarch/$(ARCH)/boot/include -HOSTCFLAGS += -Iarch/$(ARCH)/boot/include - -BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd - -bootdir-y := simple -subdir-y := lib common images -subdir-$(CONFIG_PPC_PREP) += of1275 - -# for cleaning -subdir- += simple - -hostprogs-y := $(addprefix utils/, mkprep mkbugboot mktree) - -PHONY += $(BOOT_TARGETS) $(bootdir-y) - -$(BOOT_TARGETS): $(bootdir-y) - -$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \ - $(addprefix $(obj)/,$(hostprogs-y)) - $(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS) diff --git a/arch/ppc/boot/common/Makefile b/arch/ppc/boot/common/Makefile deleted file mode 100644 index a2e85e3beb8..00000000000 --- a/arch/ppc/boot/common/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Tom Rini January 2001 -# - -lib-y := string.o util.o misc-common.o \ - serial_stub.o bootinfo.o -lib-$(CONFIG_SERIAL_8250_CONSOLE) += ns16550.o diff --git a/arch/ppc/boot/common/bootinfo.c b/arch/ppc/boot/common/bootinfo.c deleted file mode 100644 index f4dc9b9fab9..00000000000 --- a/arch/ppc/boot/common/bootinfo.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * General bootinfo record utilities - * Author: Randy Vinson <rvinson@mvista.com> - * - * 2002 (c) MontaVista Software, Inc. This file is licensed under the terms - * of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <asm/bootinfo.h> - -#include "nonstdio.h" - -static struct bi_record * birec = NULL; - -static struct bi_record * -__bootinfo_build(struct bi_record *rec, unsigned long tag, unsigned long size, - void *data) -{ - /* set the tag */ - rec->tag = tag; - - /* if the caller has any data, copy it */ - if (size) - memcpy(rec->data, (char *)data, size); - - /* set the record size */ - rec->size = sizeof(struct bi_record) + size; - - /* advance to the next available space */ - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - return rec; -} - -void -bootinfo_init(struct bi_record *rec) -{ - - /* save start of birec area */ - birec = rec; - - /* create an empty list */ - rec = __bootinfo_build(rec, BI_FIRST, 0, NULL); - (void) __bootinfo_build(rec, BI_LAST, 0, NULL); - -} - -void -bootinfo_append(unsigned long tag, unsigned long size, void * data) -{ - - struct bi_record *rec = birec; - - /* paranoia */ - if ((rec == NULL) || (rec->tag != BI_FIRST)) - return; - - /* find the last entry in the list */ - while (rec->tag != BI_LAST) - rec = (struct bi_record *)((ulong)rec + rec->size); - - /* overlay BI_LAST record with new one and tag on a new BI_LAST */ - rec = __bootinfo_build(rec, tag, size, data); - (void) __bootinfo_build(rec, BI_LAST, 0, NULL); -} diff --git a/arch/ppc/boot/common/crt0.S b/arch/ppc/boot/common/crt0.S deleted file mode 100644 index 8f0ef04b8de..00000000000 --- a/arch/ppc/boot/common/crt0.S +++ /dev/null @@ -1,80 +0,0 @@ -/* Copyright (c) 1997 Paul Mackerras <paulus@cs.anu.edu.au> - * Initial Power Macintosh COFF version. - * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> - * Modifications for IBM PowerPC 400-class processor evaluation - * boards. - * - * Module name: crt0.S - * - * Description: - * Boot loader execution entry point. Clears out .bss section as per - * ANSI C requirements. Invalidates and flushes the caches over the - * range covered by the boot loader's .text section. Sets up a stack - * below the .text section entry point. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <asm/ppc_asm.h> - - .text - - .globl _start -_start: -#ifdef XCOFF - .long __start,0,0 - - .globl __start -__start: -#endif - - ## Flush and invalidate the caches for the range in memory covering - ## the .text section of the boot loader - - lis r9,_start@h # r9 = &_start - lis r8,_etext@ha # - addi r8,r8,_etext@l # r8 = &_etext -3: dcbf r0,r9 # Flush the data cache - icbi r0,r9 # Invalidate the instruction cache - addi r9,r9,0x10 # Increment by one cache line - cmplw cr0,r9,r8 # Are we at the end yet? - blt 3b # No, keep flushing and invalidating - sync # sync ; isync after flushing the icache - isync - - ## Clear out the BSS as per ANSI C requirements - - lis r7,_end@ha - addi r7,r7,_end@l # r7 = &_end - lis r8,__bss_start@ha # - addi r8,r8,__bss_start@l # r8 = &_bss_start - - ## Determine how large an area, in number of words, to clear - - subf r7,r8,r7 # r7 = &_end - &_bss_start + 1 - addi r7,r7,3 # r7 += 3 - srwi. r7,r7,2 # r7 = size in words. - beq 2f # If the size is zero, do not bother - addi r8,r8,-4 # r8 -= 4 - mtctr r7 # SPRN_CTR = number of words to clear - li r0,0 # r0 = 0 -1: stwu r0,4(r8) # Clear out a word - bdnz 1b # If we are not done yet, keep clearing -2: - -#ifdef CONFIG_40x - ## Set up the stack - - lis r9,_start@h # r9 = &_start (text section entry) - ori r9,r9,_start@l - subi r1,r9,64 # Start the stack 64 bytes below _start - clrrwi r1,r1,4 # Make sure it is aligned on 16 bytes. - li r0,0 - stwu r0,-16(r1) - mtlr r9 -#endif - - b start # All done, start the real work. diff --git a/arch/ppc/boot/common/misc-common.c b/arch/ppc/boot/common/misc-common.c deleted file mode 100644 index 9589969cec7..00000000000 --- a/arch/ppc/boot/common/misc-common.c +++ /dev/null @@ -1,555 +0,0 @@ -/* - * Misc. bootloader code (almost) all platforms can use - * - * Author: Johnnie Peters <jpeters@mvista.com> - * Editor: Tom Rini <trini@mvista.com> - * - * Derived from arch/ppc/boot/prep/misc.c - * - * 2000-2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <stdarg.h> /* for va_ bits */ -#include <linux/string.h> -#include <linux/zlib.h> -#include "nonstdio.h" - -/* If we're on a PReP, assume we have a keyboard controller - * Also note, if we're not PReP, we assume you are a serial - * console - Tom */ -#if defined(CONFIG_PPC_PREP) && defined(CONFIG_VGA_CONSOLE) -extern void cursor(int x, int y); -extern void scroll(void); -extern char *vidmem; -extern int lines, cols; -extern int orig_x, orig_y; -extern int keyb_present; -extern int CRT_tstc(void); -extern int CRT_getc(void); -#else -int cursor(int x, int y) {return 0;} -void scroll(void) {} -char vidmem[1]; -#define lines 0 -#define cols 0 -int orig_x = 0; -int orig_y = 0; -#define keyb_present 0 -int CRT_tstc(void) {return 0;} -int CRT_getc(void) {return 0;} -#endif - -extern char *avail_ram; -extern char *end_avail; -extern char _end[]; - -void puts(const char *); -void putc(const char c); -void puthex(unsigned long val); -void gunzip(void *, int, unsigned char *, int *); -static int _cvt(unsigned long val, char *buf, long radix, char *digits); - -void _vprintk(void(*putc)(const char), const char *fmt0, va_list ap); -unsigned char *ISA_io = NULL; - -#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \ - || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE) \ - || defined(CONFIG_SERIAL_UARTLITE_CONSOLE) -extern unsigned long com_port; - -extern int serial_tstc(unsigned long com_port); -extern unsigned char serial_getc(unsigned long com_port); -extern void serial_putc(unsigned long com_port, unsigned char c); -#endif - -void pause(void) -{ - puts("pause\n"); -} - -void exit(void) -{ - puts("exit\n"); - while(1); -} - -int tstc(void) -{ -#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \ - || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE) \ - || defined(CONFIG_SERIAL_UARTLITE_CONSOLE) - if(keyb_present) - return (CRT_tstc() || serial_tstc(com_port)); - else - return (serial_tstc(com_port)); -#else - return CRT_tstc(); -#endif -} - -int getc(void) -{ - while (1) { -#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \ - || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE) \ - || defined(CONFIG_SERIAL_UARTLITE_CONSOLE) - if (serial_tstc(com_port)) - return (serial_getc(com_port)); -#endif /* serial console */ - if (keyb_present) - if(CRT_tstc()) - return (CRT_getc()); - } -} - -void -putc(const char c) -{ - int x,y; - -#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \ - || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE) \ - || defined(CONFIG_SERIAL_UARTLITE_CONSOLE) - serial_putc(com_port, c); - if ( c == '\n' ) - serial_putc(com_port, '\r'); -#endif /* serial console */ - - x = orig_x; - y = orig_y; - - if ( c == '\n' ) { - x = 0; - if ( ++y >= lines ) { - scroll(); - y--; - } - } else if (c == '\r') { - x = 0; - } else if (c == '\b') { - if (x > 0) { - x--; - } - } else { - vidmem [ ( x + cols * y ) * 2 ] = c; - if ( ++x >= cols ) { - x = 0; - if ( ++y >= lines ) { - scroll(); - y--; - } - } - } - - cursor(x, y); - - orig_x = x; - orig_y = y; -} - -void puts(const char *s) -{ - int x,y; - char c; - - x = orig_x; - y = orig_y; - - while ( ( c = *s++ ) != '\0' ) { -#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \ - || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE) \ - || defined(CONFIG_SERIAL_UARTLITE_CONSOLE) - serial_putc(com_port, c); - if ( c == '\n' ) serial_putc(com_port, '\r'); -#endif /* serial console */ - - if ( c == '\n' ) { - x = 0; - if ( ++y >= lines ) { - scroll(); - y--; - } - } else if (c == '\b') { - if (x > 0) { - x--; - } - } else { - vidmem [ ( x + cols * y ) * 2 ] = c; - if ( ++x >= cols ) { - x = 0; - if ( ++y >= lines ) { - scroll(); - y--; - } - } - } - } - - cursor(x, y); - - orig_x = x; - orig_y = y; -} - -void error(char *x) -{ - puts("\n\n"); - puts(x); - puts("\n\n -- System halted"); - - while(1); /* Halt */ -} - -static void *zalloc(unsigned size) -{ - void *p = avail_ram; - - size = (size + 7) & -8; - avail_ram += size; - if (avail_ram > end_avail) { - puts("oops... out of memory\n"); - pause(); - } - return p; -} - -#define HEAD_CRC 2 -#define EXTRA_FIELD 4 -#define ORIG_NAME 8 -#define COMMENT 0x10 -#define RESERVED 0xe0 - -void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) -{ - z_stream s; - int r, i, flags; - - /* skip header */ - i = 10; - flags = src[3]; - if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) { - puts("bad gzipped data\n"); - exit(); - } - if ((flags & EXTRA_FIELD) != 0) - i = 12 + src[10] + (src[11] << 8); - if ((flags & ORIG_NAME) != 0) - while (src[i++] != 0) - ; - if ((flags & COMMENT) != 0) - while (src[i++] != 0) - ; - if ((flags & HEAD_CRC) != 0) - i += 2; - if (i >= *lenp) { - puts("gunzip: ran out of data in header\n"); - exit(); - } - - /* Initialize ourself. */ - s.workspace = zalloc(zlib_inflate_workspacesize()); - r = zlib_inflateInit2(&s, -MAX_WBITS); - if (r != Z_OK) { - puts("zlib_inflateInit2 returned "); puthex(r); puts("\n"); - exit(); - } - s.next_in = src + i; - s.avail_in = *lenp - i; - s.next_out = dst; - s.avail_out = dstlen; - r = zlib_inflate(&s, Z_FINISH); - if (r != Z_OK && r != Z_STREAM_END) { - puts("inflate returned "); puthex(r); puts("\n"); - exit(); - } - *lenp = s.next_out - (unsigned char *) dst; - zlib_inflateEnd(&s); -} - -void -puthex(unsigned long val) -{ - - unsigned char buf[10]; - int i; - for (i = 7; i >= 0; i--) - { - buf[i] = "0123456789ABCDEF"[val & 0x0F]; - val >>= 4; - } - buf[8] = '\0'; - puts(buf); -} - -#define FALSE 0 -#define TRUE 1 - -void -_printk(char const *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - _vprintk(putc, fmt, ap); - va_end(ap); - return; -} - -#define is_digit(c) ((c >= '0') && (c <= '9')) - -void -_vprintk(void(*putc)(const char), const char *fmt0, va_list ap) -{ - char c, sign, *cp = 0; - int left_prec, right_prec, zero_fill, length = 0, pad, pad_on_right; - char buf[32]; - long val; - while ((c = *fmt0++)) - { - if (c == '%') - { - c = *fmt0++; - left_prec = right_prec = pad_on_right = 0; - if (c == '-') - { - c = *fmt0++; - pad_on_right++; - } - if (c == '0') - { - zero_fill = TRUE; - c = *fmt0++; - } else - { - zero_fill = FALSE; - } - while (is_digit(c)) - { - left_prec = (left_prec * 10) + (c - '0'); - c = *fmt0++; - } - if (c == '.') - { - c = *fmt0++; - zero_fill++; - while (is_digit(c)) - { - right_prec = (right_prec * 10) + (c - '0'); - c = *fmt0++; - } - } else - { - right_prec = left_prec; - } - sign = '\0'; - switch (c) - { - case 'd': - case 'x': - case 'X': - val = va_arg(ap, long); - switch (c) - { - case 'd': - if (val < 0) - { - sign = '-'; - val = -val; - } - length = _cvt(val, buf, 10, "0123456789"); - break; - case 'x': - length = _cvt(val, buf, 16, "0123456789abcdef"); - break; - case 'X': - length = _cvt(val, buf, 16, "0123456789ABCDEF"); - break; - } - cp = buf; - break; - case 's': - cp = va_arg(ap, char *); - length = strlen(cp); - break; - case 'c': - c = va_arg(ap, long /*char*/); - (*putc)(c); - continue; - default: - (*putc)('?'); - } - pad = left_prec - length; - if (sign != '\0') - { - pad--; - } - if (zero_fill) - { - c = '0'; - if (sign != '\0') - { - (*putc)(sign); - sign = '\0'; - } - } else - { - c = ' '; - } - if (!pad_on_right) - { - while (pad-- > 0) - { - (*putc)(c); - } - } - if (sign != '\0') - { - (*putc)(sign); - } - while (length-- > 0) - { - (*putc)(c = *cp++); - if (c == '\n') - { - (*putc)('\r'); - } - } - if (pad_on_right) - { - while (pad-- > 0) - { - (*putc)(c); - } - } - } else - { - (*putc)(c); - if (c == '\n') - { - (*putc)('\r'); - } - } - } -} - -int -_cvt(unsigned long val, char *buf, long radix, char *digits) -{ - char temp[80]; - char *cp = temp; - int length = 0; - if (val == 0) - { /* Special case */ - *cp++ = '0'; - } else - while (val) - { - *cp++ = digits[val % radix]; - val /= radix; - } - while (cp != temp) - { - *buf++ = *--cp; - length++; - } - *buf = '\0'; - return (length); -} - -void -_dump_buf_with_offset(unsigned char *p, int s, unsigned char *base) -{ - int i, c; - if ((unsigned int)s > (unsigned int)p) - { - s = (unsigned int)s - (unsigned int)p; - } - while (s > 0) - { - if (base) - { - _printk("%06X: ", (int)p - (int)base); - } else - { - _printk("%06X: ", p); - } - for (i = 0; i < 16; i++) - { - if (i < s) - { - _printk("%02X", p[i] & 0xFF); - } else - { - _printk(" "); - } - if ((i % 2) == 1) _printk(" "); - if ((i % 8) == 7) _printk(" "); - } - _printk(" |"); - for (i = 0; i < 16; i++) - { - if (i < s) - { - c = p[i] & 0xFF; - if ((c < 0x20) || (c >= 0x7F)) c = '.'; - } else - { - c = ' '; - } - _printk("%c", c); - } - _printk("|\n"); - s -= 16; - p += 16; - } -} - -void -_dump_buf(unsigned char *p, int s) -{ - _printk("\n"); - _dump_buf_with_offset(p, s, 0); -} - -/* Very simple inb/outb routines. We declare ISA_io to be 0 above, and - * then modify it on platforms which need to. We do it like this - * because on some platforms we give inb/outb an exact location, and - * on others it's an offset from a given location. -- Tom - */ - -void ISA_init(unsigned long base) -{ - ISA_io = (unsigned char *)base; -} - -void -outb(int port, unsigned char val) -{ - /* Ensure I/O operations complete */ - __asm__ volatile("eieio"); - ISA_io[port] = val; -} - -unsigned char -inb(int port) -{ - /* Ensure I/O operations complete */ - __asm__ volatile("eieio"); - return (ISA_io[port]); -} - -/* - * Local variables: - * c-indent-level: 8 - * c-basic-offset: 8 - * tab-width: 8 - * End: - */ diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c deleted file mode 100644 index fc5b7204194..00000000000 --- a/arch/ppc/boot/common/ns16550.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * COM1 NS16550 support - */ - -#include <linux/types.h> -#include <linux/serial.h> -#include <linux/serial_reg.h> -#include <asm/serial.h> - -#if defined(CONFIG_XILINX_VIRTEX) -#include <platforms/4xx/xparameters/xparameters.h> -#endif -#include "nonstdio.h" -#include "serial.h" - -#define SERIAL_BAUD 9600 - -extern unsigned long ISA_io; - -static struct serial_state rs_table[RS_TABLE_SIZE] = { - SERIAL_PORT_DFNS /* Defined in <asm/serial.h> */ -}; - -static int shift; - -unsigned long serial_init(int chan, void *ignored) -{ - unsigned long com_port, base_baud; - unsigned char lcr, dlm; - - /* We need to find out which type io we're expecting. If it's - * 'SERIAL_IO_PORT', we get an offset from the isa_io_base. - * If it's 'SERIAL_IO_MEM', we can the exact location. -- Tom */ - switch (rs_table[chan].io_type) { - case SERIAL_IO_PORT: - com_port = rs_table[chan].port; - break; - case SERIAL_IO_MEM: - com_port = (unsigned long)rs_table[chan].iomem_base; - break; - default: - /* We can't deal with it. */ - return -1; - } - - /* How far apart the registers are. */ - shift = rs_table[chan].iomem_reg_shift; - /* Base baud.. */ - base_baud = rs_table[chan].baud_base; - - /* save the LCR */ - lcr = inb(com_port + (UART_LCR << shift)); - /* Access baud rate */ - outb(com_port + (UART_LCR << shift), 0x80); - dlm = inb(com_port + (UART_DLM << shift)); - /* - * Test if serial port is unconfigured. - * We assume that no-one uses less than 110 baud or - * less than 7 bits per character these days. - * -- paulus. - */ - - if ((dlm <= 4) && (lcr & 2)) - /* port is configured, put the old LCR back */ - outb(com_port + (UART_LCR << shift), lcr); - else { - /* Input clock. */ - outb(com_port + (UART_DLL << shift), - (base_baud / SERIAL_BAUD) & 0xFF); - outb(com_port + (UART_DLM << shift), - (base_baud / SERIAL_BAUD) >> 8); - /* 8 data, 1 stop, no parity */ - outb(com_port + (UART_LCR << shift), 0x03); - /* RTS/DTR */ - outb(com_port + (UART_MCR << shift), 0x03); - } - /* Clear & enable FIFOs */ - outb(com_port + (UART_FCR << shift), 0x07); - - return (com_port); -} - -void -serial_putc(unsigned long com_port, unsigned char c) -{ - while ((inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0) - ; - outb(com_port, c); -} - -unsigned char -serial_getc(unsigned long com_port) -{ - while ((inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0) - ; - return inb(com_port); -} - -int -serial_tstc(unsigned long com_port) -{ - return ((inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0); -} diff --git a/arch/ppc/boot/common/serial_stub.c b/arch/ppc/boot/common/serial_stub.c deleted file mode 100644 index 5cc9ae66a8b..00000000000 --- a/arch/ppc/boot/common/serial_stub.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This is a few stub routines to make the boot code cleaner looking when - * there is no serial port support doesn't need to be closed, for example. - * - * Author: Tom Rini <trini@mvista.com> - * - * 2003 (c) MontaVista, Software, Inc. This file is licensed under the terms - * of the GNU General Public License version 2. This program is licensed "as - * is" without any warranty of any kind, whether express or implied. - */ - -unsigned long __attribute__ ((weak)) -serial_init(int chan, void *ignored) -{ - return 0; -} - -void __attribute__ ((weak)) -serial_close(unsigned long com_port) -{ -} diff --git a/arch/ppc/boot/common/string.S b/arch/ppc/boot/common/string.S deleted file mode 100644 index 8016e43c477..00000000000 --- a/arch/ppc/boot/common/string.S +++ /dev/null @@ -1,150 +0,0 @@ -/* - * String handling functions for PowerPC. - * - * Copyright (C) 1996 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#define r0 0 -#define r3 3 -#define r4 4 -#define r5 5 -#define r6 6 -#define r7 7 -#define r8 8 - - .globl strlen -strlen: - addi r4,r3,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - bne 1b - subf r3,r3,r4 - blr - - .globl memset -memset: - rlwimi r4,r4,8,16,23 - rlwimi r4,r4,16,0,15 - addi r6,r3,-4 - cmplwi 0,r5,4 - blt 7f - stwu r4,4(r6) - beqlr - andi. r0,r6,3 - add r5,r0,r5 - subf r6,r0,r6 - rlwinm r0,r5,32-2,2,31 - mtctr r0 - bdz 6f -1: stwu r4,4(r6) - bdnz 1b -6: andi. r5,r5,3 -7: cmpwi 0,r5,0 - beqlr - mtctr r5 - addi r6,r6,3 -8: stbu r4,1(r6) - bdnz 8b - blr - - .globl memmove -memmove: - cmplw 0,r3,r4 - bgt backwards_memcpy - /* fall through */ - - .globl memcpy -memcpy: - rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */ - addi r6,r3,-4 - addi r4,r4,-4 - beq 2f /* if less than 8 bytes to do */ - andi. r0,r6,3 /* get dest word aligned */ - mtctr r7 - bne 5f -1: lwz r7,4(r4) - lwzu r8,8(r4) - stw r7,4(r6) - stwu r8,8(r6) - bdnz 1b - andi. r5,r5,7 -2: cmplwi 0,r5,4 - blt 3f - lwzu r0,4(r4) - addi r5,r5,-4 - stwu r0,4(r6) -3: cmpwi 0,r5,0 - beqlr - mtctr r5 - addi r4,r4,3 - addi r6,r6,3 -4: lbzu r0,1(r4) - stbu r0,1(r6) - bdnz 4b - blr -5: subfic r0,r0,4 - mtctr r0 -6: lbz r7,4(r4) - addi r4,r4,1 - stb r7,4(r6) - addi r6,r6,1 - bdnz 6b - subf r5,r0,r5 - rlwinm. r7,r5,32-3,3,31 - beq 2b - mtctr r7 - b 1b - - .globl backwards_memcpy -backwards_memcpy: - rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */ - add r6,r3,r5 - add r4,r4,r5 - beq 2f - andi. r0,r6,3 - mtctr r7 - bne 5f -1: lwz r7,-4(r4) - lwzu r8,-8(r4) - stw r7,-4(r6) - stwu r8,-8(r6) - bdnz 1b - andi. r5,r5,7 -2: cmplwi 0,r5,4 - blt 3f - lwzu r0,-4(r4) - subi r5,r5,4 - stwu r0,-4(r6) -3: cmpwi 0,r5,0 - beqlr - mtctr r5 -4: lbzu r0,-1(r4) - stbu r0,-1(r6) - bdnz 4b - blr -5: mtctr r0 -6: lbzu r7,-1(r4) - stbu r7,-1(r6) - bdnz 6b - subf r5,r0,r5 - rlwinm. r7,r5,32-3,3,31 - beq 2b - mtctr r7 - b 1b - - .globl memcmp -memcmp: - cmpwi 0,r5,0 - blelr - mtctr r5 - addi r6,r3,-1 - addi r4,r4,-1 -1: lbzu r3,1(r6) - lbzu r0,1(r4) - subf. r3,r0,r3 - bdnzt 2,1b - blr diff --git a/arch/ppc/boot/common/util.S b/arch/ppc/boot/common/util.S deleted file mode 100644 index 0c5e43c4ae0..00000000000 --- a/arch/ppc/boot/common/util.S +++ /dev/null @@ -1,293 +0,0 @@ -/* - * Useful bootup functions, which are more easily done in asm than C. - * - * NOTE: Be very very careful about the registers you use here. - * We don't follow any ABI calling convention among the - * assembler functions that call each other, especially early - * in the initialization. Please preserve at least r3 and r4 - * for these early functions, as they often contain information - * passed from boot roms into the C decompress function. - * - * Author: Tom Rini - * trini@mvista.com - * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others). - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <asm/processor.h> -#include <asm/cache.h> -#include <asm/ppc_asm.h> - - - .text - -#ifdef CONFIG_6xx - .globl disable_6xx_mmu -disable_6xx_mmu: - /* Establish default MSR value, exception prefix 0xFFF. - * If necessary, this function must fix up the LR if we - * return to a different address space once the MMU is - * disabled. - */ - li r8,MSR_IP|MSR_FP - mtmsr r8 - isync - - /* Test for a 601 */ - mfpvr r10 - srwi r10,r10,16 - cmpwi 0,r10,1 /* 601 ? */ - beq .clearbats_601 - - /* Clear BATs */ - li r8,0 - mtspr SPRN_DBAT0U,r8 - mtspr SPRN_DBAT0L,r8 - mtspr SPRN_DBAT1U,r8 - mtspr SPRN_DBAT1L,r8 - mtspr SPRN_DBAT2U,r8 - mtspr SPRN_DBAT2L,r8 - mtspr SPRN_DBAT3U,r8 - mtspr SPRN_DBAT3L,r8 -.clearbats_601: - mtspr SPRN_IBAT0U,r8 - mtspr SPRN_IBAT0L,r8 - mtspr SPRN_IBAT1U,r8 - mtspr SPRN_IBAT1L,r8 - mtspr SPRN_IBAT2U,r8 - mtspr SPRN_IBAT2L,r8 - mtspr SPRN_IBAT3U,r8 - mtspr SPRN_IBAT3L,r8 - isync - sync - sync - - /* Set segment registers */ - li r8,16 /* load up segment register values */ - mtctr r8 /* for context 0 */ - lis r8,0x2000 /* Ku = 1, VSID = 0 */ - li r10,0 -3: mtsrin r8,r10 - addi r8,r8,0x111 /* increment VSID */ - addis r10,r10,0x1000 /* address of next segment */ - bdnz 3b - blr - - .globl disable_6xx_l1cache -disable_6xx_l1cache: - /* Enable, invalidate and then disable the L1 icache/dcache. */ - li r8,0 - ori r8,r8,(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI) - mfspr r11,SPRN_HID0 - or r11,r11,r8 - andc r10,r11,r8 - isync - mtspr SPRN_HID0,r8 - sync - isync - mtspr SPRN_HID0,r10 - sync - isync - blr -#endif - - .globl _setup_L2CR -_setup_L2CR: -/* - * We should be skipping this section on CPUs where this results in an - * illegal instruction. If not, please send trini@kernel.crashing.org - * the PVR of your CPU. - */ - /* Invalidate/disable L2 cache */ - sync - isync - mfspr r8,SPRN_L2CR - rlwinm r8,r8,0,1,31 - oris r8,r8,L2CR_L2I@h - sync - isync - mtspr SPRN_L2CR,r8 - sync - isync - - /* Wait for the invalidation to complete */ - mfspr r8,SPRN_PVR - srwi r8,r8,16 - cmplwi cr0,r8,0x8000 /* 7450 */ - cmplwi cr1,r8,0x8001 /* 7455 */ - cmplwi cr2,r8,0x8002 /* 7457 */ - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq /* Now test if any are true. */ - cror 4*cr0+eq,4*cr0+eq,4*cr2+eq - bne 2f - -1: mfspr r8,SPRN_L2CR /* On 745x, poll L2I bit (bit 10) */ - rlwinm. r9,r8,0,10,10 - bne 1b - b 3f - -2: mfspr r8,SPRN_L2CR /* On 75x & 74[01]0, poll L2IP bit (bit 31) */ - rlwinm. r9,r8,0,31,31 - bne 2b - -3: rlwinm r8,r8,0,11,9 /* Turn off L2I bit */ - sync - isync - mtspr SPRN_L2CR,r8 - sync - isync - blr - - .globl _setup_L3CR -_setup_L3CR: - /* Invalidate/disable L3 cache */ - sync - isync - mfspr r8,SPRN_L3CR - rlwinm r8,r8,0,1,31 - ori r8,r8,L3CR_L3I@l - sync - isync - mtspr SPRN_L3CR,r8 - sync - isync - - /* Wait for the invalidation to complete */ -1: mfspr r8,SPRN_L3CR - rlwinm. r9,r8,0,21,21 - bne 1b - - rlwinm r8,r8,0,22,20 /* Turn off L3I bit */ - sync - isync - mtspr SPRN_L3CR,r8 - sync - isync - blr - - -/* udelay (on non-601 processors) needs to know the period of the - * timebase in nanoseconds. This used to be hardcoded to be 60ns - * (period of 66MHz/4). Now a variable is used that is initialized to - * 60 for backward compatibility, but it can be overridden as necessary - * with code something like this: - * extern unsigned long timebase_period_ns; - * timebase_period_ns = 1000000000 / bd->bi_tbfreq; - */ - .data - .globl timebase_period_ns -timebase_period_ns: - .long 60 - - .text -/* - * Delay for a number of microseconds - */ - .globl udelay -udelay: - mfspr r4,SPRN_PVR - srwi r4,r4,16 - cmpwi 0,r4,1 /* 601 ? */ - bne .udelay_not_601 -00: li r0,86 /* Instructions / microsecond? */ - mtctr r0 -10: addi r0,r0,0 /* NOP */ - bdnz 10b - subic. r3,r3,1 - bne 00b - blr - -.udelay_not_601: - mulli r4,r3,1000 /* nanoseconds */ - /* Change r4 to be the number of ticks using: - * (nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns - * timebase_period_ns defaults to 60 (16.6MHz) */ - lis r5,timebase_period_ns@ha - lwz r5,timebase_period_ns@l(r5) - add r4,r4,r5 - addi r4,r4,-1 - divw r4,r4,r5 /* BUS ticks */ -1: mftbu r5 - mftb r6 - mftbu r7 - cmpw 0,r5,r7 - bne 1b /* Get [synced] base time */ - addc r9,r6,r4 /* Compute end time */ - addze r8,r5 -2: mftbu r5 - cmpw 0,r5,r8 - blt 2b - bgt 3f - mftb r6 - cmpw 0,r6,r9 - blt 2b -3: blr - - .section ".relocate_code","xa" -/* - * Flush and enable instruction cache - * First, flush the data cache in case it was enabled and may be - * holding instructions for copy back. - */ - .globl flush_instruction_cache -flush_instruction_cache: - mflr r6 - bl flush_data_cache - -#ifdef CONFIG_8xx - lis r3, IDC_INVALL@h - mtspr SPRN_IC_CST, r3 - lis r3, IDC_ENABLE@h - mtspr SPRN_IC_CST, r3 - lis r3, IDC_DISABLE@h - mtspr SPRN_DC_CST, r3 -#elif CONFIG_4xx - lis r3,start@h # r9 = &_start - lis r4,_etext@ha - addi r4,r4,_etext@l # r8 = &_etext -1: dcbf r0,r3 # Flush the data cache - icbi r0,r3 # Invalidate the instruction cache - addi r3,r3,0x10 # Increment by one cache line - cmplw cr0,r3,r4 # Are we at the end yet? - blt 1b # No, keep flushing and invalidating -#else - /* Enable, invalidate and then disable the L1 icache/dcache. */ - li r3,0 - ori r3,r3,(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI) - mfspr r4,SPRN_HID0 - or r5,r4,r3 - isync - mtspr SPRN_HID0,r5 - sync - isync - ori r5,r4,HID0_ICE /* Enable cache */ - mtspr SPRN_HID0,r5 - sync - isync -#endif - mtlr r6 - blr - -#define NUM_CACHE_LINES 128*8 -#define cache_flush_buffer 0x1000 - -/* - * Flush data cache - * Do this by just reading lots of stuff into the cache. - */ - .globl flush_data_cache -flush_data_cache: - lis r3,cache_flush_buffer@h - ori r3,r3,cache_flush_buffer@l - li r4,NUM_CACHE_LINES - mtctr r4 -00: lwz r4,0(r3) - addi r3,r3,L1_CACHE_BYTES /* Next line, please */ - bdnz 00b -10: blr - - .previous - diff --git a/arch/ppc/boot/images/.gitignore b/arch/ppc/boot/images/.gitignore deleted file mode 100644 index 21c2dc5b6b7..00000000000 --- a/arch/ppc/boot/images/.gitignore +++ /dev/null @@ -1,6 +0,0 @@ -sImage -vmapus -vmlinux* -miboot* -zImage* -uImage diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile deleted file mode 100644 index 58415d5718e..00000000000 --- a/arch/ppc/boot/images/Makefile +++ /dev/null @@ -1,34 +0,0 @@ -# -# This dir holds all of the images for PPC machines. -# Tom Rini January 2001 - -MKIMAGE := $(srctree)/scripts/mkuboot.sh - -extra-y := vmlinux.bin vmlinux.gz - -# two make processes may write to vmlinux.gz at the same time with make -j -quiet_cmd_mygzip = GZIP $@ -cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@ - - -OBJCOPYFLAGS_vmlinux.bin := -O binary -$(obj)/vmlinux.bin: vmlinux FORCE - $(call if_changed,objcopy) - -$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,mygzip) - -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \ - -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \ - -d $< $@ - -targets += uImage -$(obj)/uImage: $(obj)/vmlinux.gz - $(Q)rm -f $@ - $(call cmd,uimage) - @echo -n ' Image: $@ ' - @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi - -# Files generated that shall be removed upon make clean -clean-files := sImage vmapus vmlinux* miboot* zImage* uImage diff --git a/arch/ppc/boot/include/cpc700.h b/arch/ppc/boot/include/cpc700.h deleted file mode 100644 index 28cfcde4490..00000000000 --- a/arch/ppc/boot/include/cpc700.h +++ /dev/null @@ -1,26 +0,0 @@ - -#ifndef __PPC_BOOT_CPC700_H -#define __PPC_BOOT_CPC700_H - -#define CPC700_MEM_CFGADDR 0xff500008 -#define CPC700_MEM_CFGDATA 0xff50000c - -#define CPC700_MB0SA 0x38 -#define CPC700_MB0EA 0x58 -#define CPC700_MB1SA 0x3c -#define CPC700_MB1EA 0x5c -#define CPC700_MB2SA 0x40 -#define CPC700_MB2EA 0x60 -#define CPC700_MB3SA 0x44 -#define CPC700_MB3EA 0x64 -#define CPC700_MB4SA 0x48 -#define CPC700_MB4EA 0x68 - -static inline long -cpc700_read_memreg(int reg) -{ - out_be32((volatile unsigned int *) CPC700_MEM_CFGADDR, reg); - return in_be32((volatile unsigned int *) CPC700_MEM_CFGDATA); -} - -#endif diff --git a/arch/ppc/boot/include/iso_font.h b/arch/ppc/boot/include/iso_font.h deleted file mode 100644 index bff050e002b..00000000000 --- a/arch/ppc/boot/include/iso_font.h +++ /dev/null @@ -1,257 +0,0 @@ -static const unsigned char font[] = { -/* 0x00 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x01 */ 0x00,0x00,0x7E,0x81,0xA5,0x81,0x81,0xBD,0x99,0x81,0x81,0x7E,0x00,0x00,0x00,0x00, -/* 0x02 */ 0x00,0x00,0x7E,0xFF,0xDB,0xFF,0xFF,0xC3,0xC3,0xE7,0xFF,0x7E,0x00,0x00,0x00,0x00, -/* 0x03 */ 0x00,0x00,0x00,0x00,0x6C,0xFE,0xFE,0xFE,0xFE,0x7C,0x38,0x10,0x00,0x00,0x00,0x00, -/* 0x04 */ 0x00,0x00,0x00,0x00,0x10,0x38,0x7C,0xFE,0x7C,0x38,0x10,0x00,0x00,0x00,0x00,0x00, -/* 0x05 */ 0x00,0x00,0x00,0x18,0x3C,0x3C,0xE7,0xE7,0xE7,0x18,0x18,0x3C,0x00,0x00,0x00,0x00, -/* 0x06 */ 0x00,0x00,0x00,0x18,0x3C,0x7E,0xFF,0xFF,0x7E,0x18,0x18,0x3C,0x00,0x00,0x00,0x00, -/* 0x07 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x3C,0x3C,0x18,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x08 */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xC3,0xC3,0xE7,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -/* 0x09 */ 0x00,0x00,0x00,0x00,0x00,0x3C,0x66,0x42,0x42,0x66,0x3C,0x00,0x00,0x00,0x00,0x00, -/* 0x0A */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xC3,0x99,0xBD,0xBD,0x99,0xC3,0xFF,0xFF,0xFF,0xFF,0xFF, -/* 0x0B */ 0x00,0x00,0x3E,0x0E,0x1A,0x32,0x78,0xCC,0xCC,0xCC,0xCC,0x78,0x00,0x00,0x00,0x00, -/* 0x0C */ 0x00,0x00,0x3C,0x66,0x66,0x66,0x66,0x3C,0x18,0x7E,0x18,0x18,0x00,0x00,0x00,0x00, -/* 0x0D */ 0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x30,0x30,0x70,0xF0,0xE0,0x00,0x00,0x00,0x00, -/* 0x0E */ 0x00,0x00,0x7F,0x63,0x7F,0x63,0x63,0x63,0x63,0x67,0xE7,0xE6,0xC0,0x00,0x00,0x00, -/* 0x0F */ 0x00,0x00,0x00,0x18,0x18,0xDB,0x3C,0xE7,0x3C,0xDB,0x18,0x18,0x00,0x00,0x00,0x00, -/* 0x10 */ 0x00,0x80,0xC0,0xE0,0xF0,0xF8,0xFE,0xF8,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00, -/* 0x11 */ 0x00,0x02,0x06,0x0E,0x1E,0x3E,0xFE,0x3E,0x1E,0x0E,0x06,0x02,0x00,0x00,0x00,0x00, -/* 0x12 */ 0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x7E,0x3C,0x18,0x00,0x00,0x00,0x00,0x00, -/* 0x13 */ 0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x66,0x66,0x00,0x00,0x00,0x00, -/* 0x14 */ 0x00,0x00,0x7F,0xDB,0xDB,0xDB,0x7B,0x1B,0x1B,0x1B,0x1B,0x1B,0x00,0x00,0x00,0x00, -/* 0x15 */ 0x00,0x7C,0xC6,0x60,0x38,0x6C,0xC6,0xC6,0x6C,0x38,0x0C,0xC6,0x7C,0x00,0x00,0x00, -/* 0x16 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00, -/* 0x17 */ 0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x7E,0x3C,0x18,0x7E,0x00,0x00,0x00,0x00, -/* 0x18 */ 0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00, -/* 0x19 */ 0x00,0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x7E,0x3C,0x18,0x00,0x00,0x00,0x00, -/* 0x1A */ 0x00,0x00,0x00,0x00,0x00,0x18,0x0C,0xFE,0x0C,0x18,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x1B */ 0x00,0x00,0x00,0x00,0x00,0x30,0x60,0xFE,0x60,0x30,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x1C */ 0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xFE,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x1D */ 0x00,0x00,0x00,0x00,0x00,0x28,0x6C,0xFE,0x6C,0x28,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x1E */ 0x00,0x00,0x00,0x00,0x10,0x38,0x38,0x7C,0x7C,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00, -/* 0x1F */ 0x00,0x00,0x00,0x00,0xFE,0xFE,0x7C,0x7C,0x38,0x38,0x10,0x00,0x00,0x00,0x00,0x00, -/* 0x20 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x21 */ 0x00,0x00,0x18,0x3C,0x3C,0x3C,0x18,0x18,0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00, -/* 0x22 */ 0x00,0x66,0x66,0x66,0x24,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x23 */ 0x00,0x00,0x00,0x6C,0x6C,0xFE,0x6C,0x6C,0x6C,0xFE,0x6C,0x6C,0x00,0x00,0x00,0x00, -/* 0x24 */ 0x18,0x18,0x7C,0xC6,0xC2,0xC0,0x7C,0x06,0x06,0x86,0xC6,0x7C,0x18,0x18,0x00,0x00, -/* 0x25 */ 0x00,0x00,0x00,0x00,0xC2,0xC6,0x0C,0x18,0x30,0x60,0xC6,0x86,0x00,0x00,0x00,0x00, -/* 0x26 */ 0x00,0x00,0x38,0x6C,0x6C,0x38,0x76,0xDC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0x27 */ 0x00,0x30,0x30,0x30,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x28 */ 0x00,0x00,0x0C,0x18,0x30,0x30,0x30,0x30,0x30,0x30,0x18,0x0C,0x00,0x00,0x00,0x00, -/* 0x29 */ 0x00,0x00,0x30,0x18,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x18,0x30,0x00,0x00,0x00,0x00, -/* 0x2A */ 0x00,0x00,0x00,0x00,0x00,0x66,0x3C,0xFF,0x3C,0x66,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x2B */ 0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x7E,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x2C */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x18,0x30,0x00,0x00,0x00, -/* 0x2D */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x2E */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00, -/* 0x2F */ 0x00,0x00,0x00,0x00,0x02,0x06,0x0C,0x18,0x30,0x60,0xC0,0x80,0x00,0x00,0x00,0x00, -/* 0x30 */ 0x00,0x00,0x38,0x6C,0xC6,0xC6,0xD6,0xD6,0xC6,0xC6,0x6C,0x38,0x00,0x00,0x00,0x00, -/* 0x31 */ 0x00,0x00,0x18,0x38,0x78,0x18,0x18,0x18,0x18,0x18,0x18,0x7E,0x00,0x00,0x00,0x00, -/* 0x32 */ 0x00,0x00,0x7C,0xC6,0x06,0x0C,0x18,0x30,0x60,0xC0,0xC6,0xFE,0x00,0x00,0x00,0x00, -/* 0x33 */ 0x00,0x00,0x7C,0xC6,0x06,0x06,0x3C,0x06,0x06,0x06,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x34 */ 0x00,0x00,0x0C,0x1C,0x3C,0x6C,0xCC,0xFE,0x0C,0x0C,0x0C,0x1E,0x00,0x00,0x00,0x00, -/* 0x35 */ 0x00,0x00,0xFE,0xC0,0xC0,0xC0,0xFC,0x06,0x06,0x06,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x36 */ 0x00,0x00,0x38,0x60,0xC0,0xC0,0xFC,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x37 */ 0x00,0x00,0xFE,0xC6,0x06,0x06,0x0C,0x18,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00, -/* 0x38 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0x7C,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x39 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0x7E,0x06,0x06,0x06,0x0C,0x78,0x00,0x00,0x00,0x00, -/* 0x3A */ 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00, -/* 0x3B */ 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x30,0x00,0x00,0x00,0x00, -/* 0x3C */ 0x00,0x00,0x00,0x06,0x0C,0x18,0x30,0x60,0x30,0x18,0x0C,0x06,0x00,0x00,0x00,0x00, -/* 0x3D */ 0x00,0x00,0x00,0x00,0x00,0x7E,0x00,0x00,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x3E */ 0x00,0x00,0x00,0x60,0x30,0x18,0x0C,0x06,0x0C,0x18,0x30,0x60,0x00,0x00,0x00,0x00, -/* 0x3F */ 0x00,0x00,0x7C,0xC6,0xC6,0x0C,0x18,0x18,0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00, -/* 0x40 */ 0x00,0x00,0x00,0x7C,0xC6,0xC6,0xDE,0xDE,0xDE,0xDC,0xC0,0x7C,0x00,0x00,0x00,0x00, -/* 0x41 */ 0x00,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00, -/* 0x42 */ 0x00,0x00,0xFC,0x66,0x66,0x66,0x7C,0x66,0x66,0x66,0x66,0xFC,0x00,0x00,0x00,0x00, -/* 0x43 */ 0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xC0,0xC0,0xC2,0x66,0x3C,0x00,0x00,0x00,0x00, -/* 0x44 */ 0x00,0x00,0xF8,0x6C,0x66,0x66,0x66,0x66,0x66,0x66,0x6C,0xF8,0x00,0x00,0x00,0x00, -/* 0x45 */ 0x00,0x00,0xFE,0x66,0x62,0x68,0x78,0x68,0x60,0x62,0x66,0xFE,0x00,0x00,0x00,0x00, -/* 0x46 */ 0x00,0x00,0xFE,0x66,0x62,0x68,0x78,0x68,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00, -/* 0x47 */ 0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xDE,0xC6,0xC6,0x66,0x3A,0x00,0x00,0x00,0x00, -/* 0x48 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00, -/* 0x49 */ 0x00,0x00,0x3C,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00, -/* 0x4A */ 0x00,0x00,0x1E,0x0C,0x0C,0x0C,0x0C,0x0C,0xCC,0xCC,0xCC,0x78,0x00,0x00,0x00,0x00, -/* 0x4B */ 0x00,0x00,0xE6,0x66,0x66,0x6C,0x78,0x78,0x6C,0x66,0x66,0xE6,0x00,0x00,0x00,0x00, -/* 0x4C */ 0x00,0x00,0xF0,0x60,0x60,0x60,0x60,0x60,0x60,0x62,0x66,0xFE,0x00,0x00,0x00,0x00, -/* 0x4D */ 0x00,0x00,0xC6,0xEE,0xFE,0xFE,0xD6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00, -/* 0x4E */ 0x00,0x00,0xC6,0xE6,0xF6,0xFE,0xDE,0xCE,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00, -/* 0x4F */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x50 */ 0x00,0x00,0xFC,0x66,0x66,0x66,0x7C,0x60,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00, -/* 0x51 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xD6,0xDE,0x7C,0x0C,0x0E,0x00,0x00, -/* 0x52 */ 0x00,0x00,0xFC,0x66,0x66,0x66,0x7C,0x6C,0x66,0x66,0x66,0xE6,0x00,0x00,0x00,0x00, -/* 0x53 */ 0x00,0x00,0x7C,0xC6,0xC6,0x60,0x38,0x0C,0x06,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x54 */ 0x00,0x00,0x7E,0x7E,0x5A,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00, -/* 0x55 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x56 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x6C,0x38,0x10,0x00,0x00,0x00,0x00, -/* 0x57 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xD6,0xD6,0xD6,0xFE,0xEE,0x6C,0x00,0x00,0x00,0x00, -/* 0x58 */ 0x00,0x00,0xC6,0xC6,0x6C,0x7C,0x38,0x38,0x7C,0x6C,0xC6,0xC6,0x00,0x00,0x00,0x00, -/* 0x59 */ 0x00,0x00,0x66,0x66,0x66,0x66,0x3C,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00, -/* 0x5A */ 0x00,0x00,0xFE,0xC6,0x86,0x0C,0x18,0x30,0x60,0xC2,0xC6,0xFE,0x00,0x00,0x00,0x00, -/* 0x5B */ 0x00,0x00,0x3C,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x3C,0x00,0x00,0x00,0x00, -/* 0x5C */ 0x00,0x00,0x00,0x80,0xC0,0xE0,0x70,0x38,0x1C,0x0E,0x06,0x02,0x00,0x00,0x00,0x00, -/* 0x5D */ 0x00,0x00,0x3C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x3C,0x00,0x00,0x00,0x00, -/* 0x5E */ 0x10,0x38,0x6C,0xC6,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x5F */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00, -/* 0x60 */ 0x30,0x30,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x61 */ 0x00,0x00,0x00,0x00,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0x62 */ 0x00,0x00,0xE0,0x60,0x60,0x78,0x6C,0x66,0x66,0x66,0x66,0x7C,0x00,0x00,0x00,0x00, -/* 0x63 */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xC0,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x64 */ 0x00,0x00,0x1C,0x0C,0x0C,0x3C,0x6C,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0x65 */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xFE,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x66 */ 0x00,0x00,0x38,0x6C,0x64,0x60,0xF0,0x60,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00, -/* 0x67 */ 0x00,0x00,0x00,0x00,0x00,0x3E,0x66,0x66,0x66,0x66,0x66,0x3E,0x06,0x66,0x3C,0x00, -/* 0x68 */ 0x00,0x00,0xE0,0x60,0x60,0x6C,0x76,0x66,0x66,0x66,0x66,0xE6,0x00,0x00,0x00,0x00, -/* 0x69 */ 0x00,0x00,0x18,0x18,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00, -/* 0x6A */ 0x00,0x00,0x06,0x06,0x00,0x0E,0x06,0x06,0x06,0x06,0x06,0x06,0x66,0x66,0x3C,0x00, -/* 0x6B */ 0x00,0x00,0xE0,0x60,0x60,0x66,0x6C,0x78,0x78,0x6C,0x66,0xE6,0x00,0x00,0x00,0x00, -/* 0x6C */ 0x00,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00, -/* 0x6D */ 0x00,0x00,0x00,0x00,0x00,0x6C,0xFE,0xD6,0xD6,0xD6,0xC6,0xC6,0x00,0x00,0x00,0x00, -/* 0x6E */ 0x00,0x00,0x00,0x00,0x00,0xDC,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00, -/* 0x6F */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x70 */ 0x00,0x00,0x00,0x00,0x00,0xFC,0x66,0x66,0x66,0x66,0x66,0x7C,0x60,0x60,0xF0,0x00, -/* 0x71 */ 0x00,0x00,0x00,0x00,0x00,0x7E,0xCC,0xCC,0xCC,0xCC,0xCC,0x7C,0x0C,0x0C,0x1E,0x00, -/* 0x72 */ 0x00,0x00,0x00,0x00,0x00,0xDC,0x76,0x66,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00, -/* 0x73 */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0x60,0x38,0x0C,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x74 */ 0x00,0x00,0x10,0x30,0x30,0xFC,0x30,0x30,0x30,0x30,0x36,0x1C,0x00,0x00,0x00,0x00, -/* 0x75 */ 0x00,0x00,0x00,0x00,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0x76 */ 0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x3C,0x18,0x00,0x00,0x00,0x00, -/* 0x77 */ 0x00,0x00,0x00,0x00,0x00,0xC6,0xC6,0xD6,0xD6,0xD6,0xFE,0x6C,0x00,0x00,0x00,0x00, -/* 0x78 */ 0x00,0x00,0x00,0x00,0x00,0xC6,0x6C,0x38,0x38,0x38,0x6C,0xC6,0x00,0x00,0x00,0x00, -/* 0x79 */ 0x00,0x00,0x00,0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7E,0x06,0x0C,0xF8,0x00, -/* 0x7A */ 0x00,0x00,0x00,0x00,0x00,0xFE,0xCC,0x18,0x30,0x60,0xC6,0xFE,0x00,0x00,0x00,0x00, -/* 0x7B */ 0x00,0x00,0x0E,0x18,0x18,0x18,0x70,0x18,0x18,0x18,0x18,0x0E,0x00,0x00,0x00,0x00, -/* 0x7C */ 0x00,0x00,0x18,0x18,0x18,0x18,0x00,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00, -/* 0x7D */ 0x00,0x00,0x70,0x18,0x18,0x18,0x0E,0x18,0x18,0x18,0x18,0x70,0x00,0x00,0x00,0x00, -/* 0x7E */ 0x00,0x00,0x76,0xDC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0x7F */ 0x00,0x00,0x00,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xC6,0xFE,0x00,0x00,0x00,0x00,0x00, -/* 0x80 */ 0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xC0,0xC2,0x66,0x3C,0x0C,0x06,0x7C,0x00,0x00, -/* 0x81 */ 0x00,0x00,0xCC,0x00,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0x82 */ 0x00,0x0C,0x18,0x30,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x83 */ 0x00,0x10,0x38,0x6C,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0x84 */ 0x00,0x00,0xCC,0x00,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0x85 */ 0x00,0x60,0x30,0x18,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0x86 */ 0x00,0x38,0x6C,0x38,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0x87 */ 0x00,0x00,0x00,0x00,0x3C,0x66,0x60,0x60,0x66,0x3C,0x0C,0x06,0x3C,0x00,0x00,0x00, -/* 0x88 */ 0x00,0x10,0x38,0x6C,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x89 */ 0x00,0x00,0xC6,0x00,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x8A */ 0x00,0x60,0x30,0x18,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x8B */ 0x00,0x00,0x66,0x00,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00, -/* 0x8C */ 0x00,0x18,0x3C,0x66,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00, -/* 0x8D */ 0x00,0x60,0x30,0x18,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00, -/* 0x8E */ 0x00,0xC6,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00, -/* 0x8F */ 0x38,0x6C,0x38,0x00,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00, -/* 0x90 */ 0x18,0x30,0x60,0x00,0xFE,0x66,0x60,0x7C,0x60,0x60,0x66,0xFE,0x00,0x00,0x00,0x00, -/* 0x91 */ 0x00,0x00,0x00,0x00,0x00,0xCC,0x76,0x36,0x7E,0xD8,0xD8,0x6E,0x00,0x00,0x00,0x00, -/* 0x92 */ 0x00,0x00,0x3E,0x6C,0xCC,0xCC,0xFE,0xCC,0xCC,0xCC,0xCC,0xCE,0x00,0x00,0x00,0x00, -/* 0x93 */ 0x00,0x10,0x38,0x6C,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x94 */ 0x00,0x00,0xC6,0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x95 */ 0x00,0x60,0x30,0x18,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x96 */ 0x00,0x30,0x78,0xCC,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0x97 */ 0x00,0x60,0x30,0x18,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0x98 */ 0x00,0x00,0xC6,0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7E,0x06,0x0C,0x78,0x00, -/* 0x99 */ 0x00,0xC6,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x9A */ 0x00,0xC6,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0x9B */ 0x00,0x18,0x18,0x3C,0x66,0x60,0x60,0x60,0x66,0x3C,0x18,0x18,0x00,0x00,0x00,0x00, -/* 0x9C */ 0x00,0x38,0x6C,0x64,0x60,0xF8,0x60,0x60,0x60,0x60,0xE6,0xFC,0x00,0x00,0x00,0x00, -/* 0x9D */ 0x00,0x00,0x66,0x66,0x3C,0x18,0x7E,0x18,0x7E,0x18,0x18,0x18,0x00,0x00,0x00,0x00, -/* 0x9E */ 0x00,0xF8,0xCC,0xCC,0xF8,0xC4,0xCC,0xDE,0xCC,0xCC,0xCC,0xC6,0x00,0x00,0x00,0x00, -/* 0x9F */ 0x00,0x0E,0x1B,0x18,0x18,0x18,0x7E,0x18,0x18,0x18,0x18,0x18,0xD8,0x70,0x00,0x00, -/* 0xA0 */ 0x00,0x18,0x30,0x60,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0xA1 */ 0x00,0x0C,0x18,0x30,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00, -/* 0xA2 */ 0x00,0x18,0x30,0x60,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0xA3 */ 0x00,0x18,0x30,0x60,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00, -/* 0xA4 */ 0x00,0x00,0x76,0xDC,0x00,0xDC,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00, -/* 0xA5 */ 0x76,0xDC,0x00,0xC6,0xE6,0xF6,0xFE,0xDE,0xCE,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00, -/* 0xA6 */ 0x00,0x3C,0x6C,0x6C,0x3E,0x00,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xA7 */ 0x00,0x38,0x6C,0x6C,0x38,0x00,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xA8 */ 0x00,0x00,0x30,0x30,0x00,0x30,0x30,0x60,0xC0,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00, -/* 0xA9 */ 0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00, -/* 0xAA */ 0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x06,0x06,0x06,0x06,0x00,0x00,0x00,0x00,0x00, -/* 0xAB */ 0x00,0xC0,0xC0,0xC2,0xC6,0xCC,0x18,0x30,0x60,0xDC,0x86,0x0C,0x18,0x3E,0x00,0x00, -/* 0xAC */ 0x00,0xC0,0xC0,0xC2,0xC6,0xCC,0x18,0x30,0x66,0xCE,0x9E,0x3E,0x06,0x06,0x00,0x00, -/* 0xAD */ 0x00,0x00,0x18,0x18,0x00,0x18,0x18,0x18,0x3C,0x3C,0x3C,0x18,0x00,0x00,0x00,0x00, -/* 0xAE */ 0x00,0x00,0x00,0x00,0x00,0x36,0x6C,0xD8,0x6C,0x36,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xAF */ 0x00,0x00,0x00,0x00,0x00,0xD8,0x6C,0x36,0x6C,0xD8,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xB0 */ 0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44, -/* 0xB1 */ 0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA, -/* 0xB2 */ 0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77, -/* 0xB3 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xB4 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xB5 */ 0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xB6 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xB7 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xB8 */ 0x00,0x00,0x00,0x00,0x00,0xF8,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xB9 */ 0x36,0x36,0x36,0x36,0x36,0xF6,0x06,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xBA */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xBB */ 0x00,0x00,0x00,0x00,0x00,0xFE,0x06,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xBC */ 0x36,0x36,0x36,0x36,0x36,0xF6,0x06,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xBD */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xBE */ 0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xBF */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xC0 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xC1 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xC2 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xC3 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xC4 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xC5 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xC6 */ 0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xC7 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xC8 */ 0x36,0x36,0x36,0x36,0x36,0x37,0x30,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xC9 */ 0x00,0x00,0x00,0x00,0x00,0x3F,0x30,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xCA */ 0x36,0x36,0x36,0x36,0x36,0xF7,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xCB */ 0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xF7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xCC */ 0x36,0x36,0x36,0x36,0x36,0x37,0x30,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xCD */ 0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xCE */ 0x36,0x36,0x36,0x36,0x36,0xF7,0x00,0xF7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xCF */ 0x18,0x18,0x18,0x18,0x18,0xFF,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xD0 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xD1 */ 0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xD2 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xD3 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xD4 */ 0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xD5 */ 0x00,0x00,0x00,0x00,0x00,0x1F,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xD6 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xD7 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFF,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36, -/* 0xD8 */ 0x18,0x18,0x18,0x18,0x18,0xFF,0x18,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xD9 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xDA */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xDB */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -/* 0xDC */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -/* 0xDD */ 0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0, -/* 0xDE */ 0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F, -/* 0xDF */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xE0 */ 0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0xD8,0xD8,0xD8,0xDC,0x76,0x00,0x00,0x00,0x00, -/* 0xE1 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xFC,0xC6,0xC6,0xC6,0xC6,0xDC,0xC0,0xC0,0x00,0x00, -/* 0xE2 */ 0x00,0x00,0xFE,0xC6,0xC6,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00, -/* 0xE3 */ 0x00,0x00,0x00,0x00,0x00,0xFE,0x6C,0x6C,0x6C,0x6C,0x6C,0x6C,0x00,0x00,0x00,0x00, -/* 0xE4 */ 0x00,0x00,0xFE,0xC6,0x60,0x30,0x18,0x18,0x30,0x60,0xC6,0xFE,0x00,0x00,0x00,0x00, -/* 0xE5 */ 0x00,0x00,0x00,0x00,0x00,0x7E,0xD8,0xD8,0xD8,0xD8,0xD8,0x70,0x00,0x00,0x00,0x00, -/* 0xE6 */ 0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x7C,0x60,0xC0,0x00,0x00,0x00, -/* 0xE7 */ 0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00, -/* 0xE8 */ 0x00,0x00,0x7E,0x18,0x3C,0x66,0x66,0x66,0x66,0x3C,0x18,0x7E,0x00,0x00,0x00,0x00, -/* 0xE9 */ 0x00,0x00,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x6C,0x38,0x00,0x00,0x00,0x00, -/* 0xEA */ 0x00,0x00,0x38,0x6C,0xC6,0xC6,0xC6,0x6C,0x6C,0x6C,0x6C,0xEE,0x00,0x00,0x00,0x00, -/* 0xEB */ 0x00,0x00,0x1E,0x30,0x18,0x0C,0x3E,0x66,0x66,0x66,0x66,0x3C,0x00,0x00,0x00,0x00, -/* 0xEC */ 0x00,0x00,0x00,0x00,0x00,0x7E,0xDB,0xDB,0xDB,0x7E,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xED */ 0x00,0x00,0x00,0x03,0x06,0x7E,0xDB,0xDB,0xF3,0x7E,0x60,0xC0,0x00,0x00,0x00,0x00, -/* 0xEE */ 0x00,0x00,0x1C,0x30,0x60,0x60,0x7C,0x60,0x60,0x60,0x30,0x1C,0x00,0x00,0x00,0x00, -/* 0xEF */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00, -/* 0xF0 */ 0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0xFE,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00, -/* 0xF1 */ 0x00,0x00,0x00,0x00,0x18,0x18,0x7E,0x18,0x18,0x00,0x00,0xFF,0x00,0x00,0x00,0x00, -/* 0xF2 */ 0x00,0x00,0x00,0x30,0x18,0x0C,0x06,0x0C,0x18,0x30,0x00,0x7E,0x00,0x00,0x00,0x00, -/* 0xF3 */ 0x00,0x00,0x00,0x0C,0x18,0x30,0x60,0x30,0x18,0x0C,0x00,0x7E,0x00,0x00,0x00,0x00, -/* 0xF4 */ 0x00,0x0E,0x1B,0x1B,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, -/* 0xF5 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xD8,0xD8,0xD8,0x70,0x00,0x00,0x00,0x00, -/* 0xF6 */ 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x7E,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00, -/* 0xF7 */ 0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0x00,0x76,0xDC,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xF8 */ 0x00,0x38,0x6C,0x6C,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xF9 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xFA */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xFB */ 0x00,0x0F,0x0C,0x0C,0x0C,0x0C,0x0C,0xEC,0x6C,0x6C,0x3C,0x1C,0x00,0x00,0x00,0x00, -/* 0xFC */ 0x00,0xD8,0x6C,0x6C,0x6C,0x6C,0x6C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xFD */ 0x00,0x70,0xD8,0x30,0x60,0xC8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -/* 0xFE */ 0x00,0x00,0x00,0x00,0x7C,0x7C,0x7C,0x7C,0x7C,0x7C,0x7C,0x00,0x00,0x00,0x00,0x00, -}; diff --git a/arch/ppc/boot/include/mpc10x.h b/arch/ppc/boot/include/mpc10x.h deleted file mode 100644 index 6e5d540d8d3..00000000000 --- a/arch/ppc/boot/include/mpc10x.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Common defines for the Motorola SPS MPC106/8240/107 Host bridge/Mem - * ctrl/EPIC/etc. - * - * Author: Tom Rini <trini@mvista.com> - * - * This is a heavily stripped down version of: - * include/asm-ppc/mpc10x.h - * - * Author: Mark A. Greer - * mgreer@mvista.com - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __BOOT_MPC10X_H__ -#define __BOOT_MPC10X_H__ - -/* - * The values here don't completely map everything but should work in most - * cases. - * - * MAP A (PReP Map) - * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff - * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff - * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000 - * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) - * - * MAP B (CHRP Map) - * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff - * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff - * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000 - * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) - */ - -/* Define the type of map to use */ -#define MPC10X_MEM_MAP_A 1 -#define MPC10X_MEM_MAP_B 2 - -/* Map A (PReP Map) Defines */ -#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8 -#define MPC10X_MAPA_CNFG_DATA 0x80000cfc - -/* Map B (CHRP Map) Defines */ -#define MPC10X_MAPB_CNFG_ADDR 0xfec00000 -#define MPC10X_MAPB_CNFG_DATA 0xfee00000 - -/* Define offsets for the memory controller registers in the config space */ -#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */ -#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */ -#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */ -#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */ - -#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */ -#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */ -#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */ -#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */ - -#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0 - -#endif /* __BOOT_MPC10X_H__ */ diff --git a/arch/ppc/boot/include/mpsc_defs.h b/arch/ppc/boot/include/mpsc_defs.h deleted file mode 100644 index 9f37e1355b1..00000000000 --- a/arch/ppc/boot/include/mpsc_defs.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * arch/ppc/boot/include/mpsc_defs.h - * - * Register definitions for the Marvell Multi-Protocol Serial Controller (MPSC), - * Serial DMA Controller (SDMA), and Baud Rate Generator (BRG). - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef _PPC_BOOT_MPSC_DEFS_H__ -#define _PPC_BOOT_MPSC_DEFS_H__ - -#define MPSC_NUM_CTLRS 2 - -/* - ***************************************************************************** - * - * Multi-Protocol Serial Controller Interface Registers - * - ***************************************************************************** - */ - -/* Main Configuratino Register Offsets */ -#define MPSC_MMCRL 0x0000 -#define MPSC_MMCRH 0x0004 -#define MPSC_MPCR 0x0008 -#define MPSC_CHR_1 0x000c -#define MPSC_CHR_2 0x0010 -#define MPSC_CHR_3 0x0014 -#define MPSC_CHR_4 0x0018 -#define MPSC_CHR_5 0x001c -#define MPSC_CHR_6 0x0020 -#define MPSC_CHR_7 0x0024 -#define MPSC_CHR_8 0x0028 -#define MPSC_CHR_9 0x002c -#define MPSC_CHR_10 0x0030 -#define MPSC_CHR_11 0x0034 - -#define MPSC_MPCR_CL_5 0 -#define MPSC_MPCR_CL_6 1 -#define MPSC_MPCR_CL_7 2 -#define MPSC_MPCR_CL_8 3 -#define MPSC_MPCR_SBL_1 0 -#define MPSC_MPCR_SBL_2 3 - -#define MPSC_CHR_2_TEV (1<<1) -#define MPSC_CHR_2_TA (1<<7) -#define MPSC_CHR_2_TTCS (1<<9) -#define MPSC_CHR_2_REV (1<<17) -#define MPSC_CHR_2_RA (1<<23) -#define MPSC_CHR_2_CRD (1<<25) -#define MPSC_CHR_2_EH (1<<31) -#define MPSC_CHR_2_PAR_ODD 0 -#define MPSC_CHR_2_PAR_SPACE 1 -#define MPSC_CHR_2_PAR_EVEN 2 -#define MPSC_CHR_2_PAR_MARK 3 - -/* MPSC Signal Routing */ -#define MPSC_MRR 0x0000 -#define MPSC_RCRR 0x0004 -#define MPSC_TCRR 0x0008 - -/* - ***************************************************************************** - * - * Serial DMA Controller Interface Registers - * - ***************************************************************************** - */ - -#define SDMA_SDC 0x0000 -#define SDMA_SDCM 0x0008 -#define SDMA_RX_DESC 0x0800 -#define SDMA_RX_BUF_PTR 0x0808 -#define SDMA_SCRDP 0x0810 -#define SDMA_TX_DESC 0x0c00 -#define SDMA_SCTDP 0x0c10 -#define SDMA_SFTDP 0x0c14 - -#define SDMA_DESC_CMDSTAT_PE (1<<0) -#define SDMA_DESC_CMDSTAT_CDL (1<<1) -#define SDMA_DESC_CMDSTAT_FR (1<<3) -#define SDMA_DESC_CMDSTAT_OR (1<<6) -#define SDMA_DESC_CMDSTAT_BR (1<<9) -#define SDMA_DESC_CMDSTAT_MI (1<<10) -#define SDMA_DESC_CMDSTAT_A (1<<11) -#define SDMA_DESC_CMDSTAT_AM (1<<12) -#define SDMA_DESC_CMDSTAT_CT (1<<13) -#define SDMA_DESC_CMDSTAT_C (1<<14) -#define SDMA_DESC_CMDSTAT_ES (1<<15) -#define SDMA_DESC_CMDSTAT_L (1<<16) -#define SDMA_DESC_CMDSTAT_F (1<<17) -#define SDMA_DESC_CMDSTAT_P (1<<18) -#define SDMA_DESC_CMDSTAT_EI (1<<23) -#define SDMA_DESC_CMDSTAT_O (1<<31) - -#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O | \ - SDMA_DESC_CMDSTAT_EI) - -#define SDMA_SDC_RFT (1<<0) -#define SDMA_SDC_SFM (1<<1) -#define SDMA_SDC_BLMR (1<<6) -#define SDMA_SDC_BLMT (1<<7) -#define SDMA_SDC_POVR (1<<8) -#define SDMA_SDC_RIFB (1<<9) - -#define SDMA_SDCM_ERD (1<<7) -#define SDMA_SDCM_AR (1<<15) -#define SDMA_SDCM_STD (1<<16) -#define SDMA_SDCM_TXD (1<<23) -#define SDMA_SDCM_AT (1<<31) - -#define SDMA_0_CAUSE_RXBUF (1<<0) -#define SDMA_0_CAUSE_RXERR (1<<1) -#define SDMA_0_CAUSE_TXBUF (1<<2) -#define SDMA_0_CAUSE_TXEND (1<<3) -#define SDMA_1_CAUSE_RXBUF (1<<8) -#define SDMA_1_CAUSE_RXERR (1<<9) -#define SDMA_1_CAUSE_TXBUF (1<<10) -#define SDMA_1_CAUSE_TXEND (1<<11) - -#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \ - SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR) -#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \ - SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND) - -/* SDMA Interrupt registers */ -#define SDMA_INTR_CAUSE 0x0000 -#define SDMA_INTR_MASK 0x0080 - -/* - ***************************************************************************** - * - * Baud Rate Generator Interface Registers - * - ***************************************************************************** - */ - -#define BRG_BCR 0x0000 -#define BRG_BTR 0x0004 - -#endif /*_PPC_BOOT_MPSC_DEFS_H__ */ diff --git a/arch/ppc/boot/include/nonstdio.h b/arch/ppc/boot/include/nonstdio.h deleted file mode 100644 index f2b5526faef..00000000000 --- a/arch/ppc/boot/include/nonstdio.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * This is sort of a catchall for I/O related functions. Stuff that - * wouldn't be in 'stdio.h' normally is here, and it's 'nonstdio.h' - * for a reason. -- Tom - */ -typedef int FILE; -extern FILE *stdin, *stdout; -#define NULL ((void *)0) -#define EOF (-1) -#define fopen(n, m) NULL -#define fflush(f) 0 -#define fclose(f) 0 -#define perror(s) printf("%s: no files!\n", (s)) - -extern int getc(void); -extern int printf(const char *format, ...); -extern int sprintf(char *str, const char *format, ...); -extern int tstc(void); -extern void exit(void); -extern void outb(int port, unsigned char val); -extern void putc(const char c); -extern void puthex(unsigned long val); -extern void puts(const char *); -extern void udelay(long delay); -extern unsigned char inb(int port); -extern void board_isa_init(void); -extern void ISA_init(unsigned long base); diff --git a/arch/ppc/boot/include/of1275.h b/arch/ppc/boot/include/of1275.h deleted file mode 100644 index 4ed88acfa73..00000000000 --- a/arch/ppc/boot/include/of1275.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * Copyright (C) Leigh Brown 2002. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -typedef void *prom_handle; -typedef void *ihandle; -typedef void *phandle; -typedef int (*prom_entry)(void *); - -#define OF_INVALID_HANDLE ((prom_handle)-1UL) - -extern prom_entry of_prom_entry; - -/* function declarations */ - -int call_prom(const char *service, int nargs, int nret, ...); -int call_prom_ret(const char *service, int nargs, int nret, - unsigned int *rets, ...); -void * claim(unsigned int virt, unsigned int size, unsigned int align); -int map(unsigned int phys, unsigned int virt, unsigned int size); -void enter(void); -void exit(void); -phandle finddevice(const char *name); -int getprop(phandle node, const char *name, void *buf, int buflen); -void ofinit(prom_entry entry); -int ofstdio(ihandle *stdin, ihandle *stdout, ihandle *stderr); -int read(ihandle instance, void *buf, int buflen); -void release(void *virt, unsigned int size); -int write(ihandle instance, void *buf, int buflen); - -/* inlines */ - -extern inline void pause(void) -{ - enter(); -} diff --git a/arch/ppc/boot/include/rs6000.h b/arch/ppc/boot/include/rs6000.h deleted file mode 100644 index 433f45084e4..00000000000 --- a/arch/ppc/boot/include/rs6000.h +++ /dev/null @@ -1,243 +0,0 @@ -/* IBM RS/6000 "XCOFF" file definitions for BFD. - Copyright (C) 1990, 1991 Free Software Foundation, Inc. - FIXME: Can someone provide a transliteration of this name into ASCII? - Using the following chars caused a compiler warning on HIUX (so I replaced - them with octal escapes), and isn't useful without an understanding of what - character set it is. - Written by Mimi Ph\373\364ng-Th\345o V\365 of IBM - and John Gilmore of Cygnus Support. */ - -/********************** FILE HEADER **********************/ - -struct external_filehdr { - char f_magic[2]; /* magic number */ - char f_nscns[2]; /* number of sections */ - char f_timdat[4]; /* time & date stamp */ - char f_symptr[4]; /* file pointer to symtab */ - char f_nsyms[4]; /* number of symtab entries */ - char f_opthdr[2]; /* sizeof(optional hdr) */ - char f_flags[2]; /* flags */ -}; - - /* IBM RS/6000 */ -#define U802WRMAGIC 0730 /* writeable text segments **chh** */ -#define U802ROMAGIC 0735 /* readonly sharable text segments */ -#define U802TOCMAGIC 0737 /* readonly text segments and TOC */ - -#define BADMAG(x) \ - ((x).f_magic != U802ROMAGIC && (x).f_magic != U802WRMAGIC && \ - (x).f_magic != U802TOCMAGIC) - -#define FILHDR struct external_filehdr -#define FILHSZ 20 - - -/********************** AOUT "OPTIONAL HEADER" **********************/ - - -typedef struct -{ - unsigned char magic[2]; /* type of file */ - unsigned char vstamp[2]; /* version stamp */ - unsigned char tsize[4]; /* text size in bytes, padded to FW bdry */ - unsigned char dsize[4]; /* initialized data " " */ - unsigned char bsize[4]; /* uninitialized data " " */ - unsigned char entry[4]; /* entry pt. */ - unsigned char text_start[4]; /* base of text used for this file */ - unsigned char data_start[4]; /* base of data used for this file */ - unsigned char o_toc[4]; /* address of TOC */ - unsigned char o_snentry[2]; /* section number of entry point */ - unsigned char o_sntext[2]; /* section number of .text section */ - unsigned char o_sndata[2]; /* section number of .data section */ - unsigned char o_sntoc[2]; /* section number of TOC */ - unsigned char o_snloader[2]; /* section number of .loader section */ - unsigned char o_snbss[2]; /* section number of .bss section */ - unsigned char o_algntext[2]; /* .text alignment */ - unsigned char o_algndata[2]; /* .data alignment */ - unsigned char o_modtype[2]; /* module type (??) */ - unsigned char o_cputype[2]; /* cpu type */ - unsigned char o_maxstack[4]; /* max stack size (??) */ - unsigned char o_maxdata[4]; /* max data size (??) */ - unsigned char o_resv2[12]; /* reserved */ -} -AOUTHDR; - -#define AOUTSZ 72 -#define SMALL_AOUTSZ (28) -#define AOUTHDRSZ 72 - -#define RS6K_AOUTHDR_OMAGIC 0x0107 /* old: text & data writeable */ -#define RS6K_AOUTHDR_NMAGIC 0x0108 /* new: text r/o, data r/w */ -#define RS6K_AOUTHDR_ZMAGIC 0x010B /* paged: text r/o, both page-aligned */ - - -/********************** SECTION HEADER **********************/ - - -struct external_scnhdr { - char s_name[8]; /* section name */ - char s_paddr[4]; /* physical address, aliased s_nlib */ - char s_vaddr[4]; /* virtual address */ - char s_size[4]; /* section size */ - char s_scnptr[4]; /* file ptr to raw data for section */ - char s_relptr[4]; /* file ptr to relocation */ - char s_lnnoptr[4]; /* file ptr to line numbers */ - char s_nreloc[2]; /* number of relocation entries */ - char s_nlnno[2]; /* number of line number entries*/ - char s_flags[4]; /* flags */ -}; - -/* - * names of "special" sections - */ -#define _TEXT ".text" -#define _DATA ".data" -#define _BSS ".bss" -#define _PAD ".pad" -#define _LOADER ".loader" - -#define SCNHDR struct external_scnhdr -#define SCNHSZ 40 - -/* XCOFF uses a special .loader section with type STYP_LOADER. */ -#define STYP_LOADER 0x1000 - -/* XCOFF uses a special .debug section with type STYP_DEBUG. */ -#define STYP_DEBUG 0x2000 - -/* XCOFF handles line number or relocation overflow by creating - another section header with STYP_OVRFLO set. */ -#define STYP_OVRFLO 0x8000 - -/********************** LINE NUMBERS **********************/ - -/* 1 line number entry for every "breakpointable" source line in a section. - * Line numbers are grouped on a per function basis; first entry in a function - * grouping will have l_lnno = 0 and in place of physical address will be the - * symbol table index of the function name. - */ -struct external_lineno { - union { - char l_symndx[4]; /* function name symbol index, iff l_lnno == 0*/ - char l_paddr[4]; /* (physical) address of line number */ - } l_addr; - char l_lnno[2]; /* line number */ -}; - - -#define LINENO struct external_lineno -#define LINESZ 6 - - -/********************** SYMBOLS **********************/ - -#define E_SYMNMLEN 8 /* # characters in a symbol name */ -#define E_FILNMLEN 14 /* # characters in a file name */ -#define E_DIMNUM 4 /* # array dimensions in auxiliary entry */ - -struct external_syment -{ - union { - char e_name[E_SYMNMLEN]; - struct { - char e_zeroes[4]; - char e_offset[4]; - } e; - } e; - char e_value[4]; - char e_scnum[2]; - char e_type[2]; - char e_sclass[1]; - char e_numaux[1]; -}; - - - -#define N_BTMASK (017) -#define N_TMASK (060) -#define N_BTSHFT (4) -#define N_TSHIFT (2) - - -union external_auxent { - struct { - char x_tagndx[4]; /* str, un, or enum tag indx */ - union { - struct { - char x_lnno[2]; /* declaration line number */ - char x_size[2]; /* str/union/array size */ - } x_lnsz; - char x_fsize[4]; /* size of function */ - } x_misc; - union { - struct { /* if ISFCN, tag, or .bb */ - char x_lnnoptr[4]; /* ptr to fcn line # */ - char x_endndx[4]; /* entry ndx past block end */ - } x_fcn; - struct { /* if ISARY, up to 4 dimen. */ - char x_dimen[E_DIMNUM][2]; - } x_ary; - } x_fcnary; - char x_tvndx[2]; /* tv index */ - } x_sym; - - union { - char x_fname[E_FILNMLEN]; - struct { - char x_zeroes[4]; - char x_offset[4]; - } x_n; - } x_file; - - struct { - char x_scnlen[4]; /* section length */ - char x_nreloc[2]; /* # relocation entries */ - char x_nlinno[2]; /* # line numbers */ - } x_scn; - - struct { - char x_tvfill[4]; /* tv fill value */ - char x_tvlen[2]; /* length of .tv */ - char x_tvran[2][2]; /* tv range */ - } x_tv; /* info about .tv section (in auxent of symbol .tv)) */ - - struct { - unsigned char x_scnlen[4]; - unsigned char x_parmhash[4]; - unsigned char x_snhash[2]; - unsigned char x_smtyp[1]; - unsigned char x_smclas[1]; - unsigned char x_stab[4]; - unsigned char x_snstab[2]; - } x_csect; - -}; - -#define SYMENT struct external_syment -#define SYMESZ 18 -#define AUXENT union external_auxent -#define AUXESZ 18 -#define DBXMASK 0x80 /* for dbx storage mask */ -#define SYMNAME_IN_DEBUG(symptr) ((symptr)->n_sclass & DBXMASK) - - - -/********************** RELOCATION DIRECTIVES **********************/ - - -struct external_reloc { - char r_vaddr[4]; - char r_symndx[4]; - char r_size[1]; - char r_type[1]; -}; - - -#define RELOC struct external_reloc -#define RELSZ 10 - -#define DEFAULT_DATA_SECTION_ALIGNMENT 4 -#define DEFAULT_BSS_SECTION_ALIGNMENT 4 -#define DEFAULT_TEXT_SECTION_ALIGNMENT 4 -/* For new sections we havn't heard of before */ -#define DEFAULT_SECTION_ALIGNMENT 4 diff --git a/arch/ppc/boot/include/serial.h b/arch/ppc/boot/include/serial.h deleted file mode 100644 index d710eabb425..00000000000 --- a/arch/ppc/boot/include/serial.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * A really private header file for the (dumb) serial driver in arch/ppc/boot - * - * Shamelessly taken from include/linux/serialP.h: - * - * Copyright (C) 1997 by Theodore Ts'o. - * - * Redistribution of this file is permitted under the terms of the GNU - * Public License (GPL) - */ - -#ifndef _PPC_BOOT_SERIALP_H -#define _PPC_BOOT_SERIALP_H - -/* - * This is our internal structure for each serial port's state. - * - * Many fields are paralleled by the structure used by the serial_struct - * structure. - * - * Given that this is how SERIAL_PORT_DFNS are done, and that we need - * to use a few of their fields, we need to have our own copy of it. - */ -struct serial_state { - int magic; - int baud_base; - unsigned long port; - int irq; - int flags; - int hub6; - int type; - int line; - int revision; /* Chip revision (950) */ - int xmit_fifo_size; - int custom_divisor; - int count; - u8 *iomem_base; - u16 iomem_reg_shift; - unsigned short close_delay; - unsigned short closing_wait; /* time to wait before closing */ - unsigned long icount; - int io_type; - void *info; - void *dev; -}; -#endif /* _PPC_BOOT_SERIAL_H */ diff --git a/arch/ppc/boot/ld.script b/arch/ppc/boot/ld.script deleted file mode 100644 index d4dd8f15395..00000000000 --- a/arch/ppc/boot/ld.script +++ /dev/null @@ -1,85 +0,0 @@ -OUTPUT_ARCH(powerpc:common) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .plt : { *(.plt) } - .text : - { - *(.text) - *(.fixup) - __relocate_start = .; - *(.relocate_code) - __relocate_end = .; - } - _etext = .; - PROVIDE (etext = .); - - /* Read-write section, merged into data segment: */ - . = ALIGN(4096); - .data : - { - *(.data) - *(.data1) - *(.data.boot) - *(.sdata) - *(.sdata2) - *(.got.plt) *(.got) - *(.dynamic) - *(.rodata) - *(.rodata.*) - *(.rodata1) - *(.got1) - __image_begin = .; - *(.image) - __image_end = .; - . = ALIGN(4096); - __ramdisk_begin = .; - *(.ramdisk) - __ramdisk_end = .; - . = ALIGN(4096); - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = ALIGN(4096); - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); - - /DISCARD/ : { - *(__ksymtab) - *(__ksymtab_strings) - *(__bug_table) - *(__kcrctab) - } - -} diff --git a/arch/ppc/boot/lib/.gitignore b/arch/ppc/boot/lib/.gitignore deleted file mode 100644 index 1629a616775..00000000000 --- a/arch/ppc/boot/lib/.gitignore +++ /dev/null @@ -1,3 +0,0 @@ -inffast.c -inflate.c -inftrees.c diff --git a/arch/ppc/boot/lib/Makefile b/arch/ppc/boot/lib/Makefile deleted file mode 100644 index 2f995f712ec..00000000000 --- a/arch/ppc/boot/lib/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -# -# Makefile for some libs needed by zImage. -# - -CFLAGS_kbd.o := -Idrivers/char -CFLAGS_vreset.o := -Iarch/ppc/boot/include - -zlib := inffast.c inflate.c inftrees.c - -lib-y += $(zlib:.c=.o) div64.o -lib-$(CONFIG_VGA_CONSOLE) += vreset.o kbd.o - - -# zlib files needs header from their original place -EXTRA_CFLAGS += -Ilib/zlib_inflate - -quiet_cmd_copy_zlib = COPY $@ - cmd_copy_zlib = cat $< > $@ - -$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/% - $(call cmd,copy_zlib) - -clean-files := $(zlib) diff --git a/arch/ppc/boot/lib/div64.S b/arch/ppc/boot/lib/div64.S deleted file mode 100644 index 3527569e992..00000000000 --- a/arch/ppc/boot/lib/div64.S +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Divide a 64-bit unsigned number by a 32-bit unsigned number. - * This routine assumes that the top 32 bits of the dividend are - * non-zero to start with. - * On entry, r3 points to the dividend, which get overwritten with - * the 64-bit quotient, and r4 contains the divisor. - * On exit, r3 contains the remainder. - * - * Copyright (C) 2002 Paul Mackerras, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <asm/ppc_asm.h> -#include <asm/processor.h> - -_GLOBAL(__div64_32) - lwz r5,0(r3) # get the dividend into r5/r6 - lwz r6,4(r3) - cmplw r5,r4 - li r7,0 - li r8,0 - blt 1f - divwu r7,r5,r4 # if dividend.hi >= divisor, - mullw r0,r7,r4 # quotient.hi = dividend.hi / divisor - subf. r5,r0,r5 # dividend.hi %= divisor - beq 3f -1: mr r11,r5 # here dividend.hi != 0 - andis. r0,r5,0xc000 - bne 2f - cntlzw r0,r5 # we are shifting the dividend right - li r10,-1 # to make it < 2^32, and shifting - srw r10,r10,r0 # the divisor right the same amount, - add r9,r4,r10 # rounding up (so the estimate cannot - andc r11,r6,r10 # ever be too large, only too small) - andc r9,r9,r10 - or r11,r5,r11 - rotlw r9,r9,r0 - rotlw r11,r11,r0 - divwu r11,r11,r9 # then we divide the shifted quantities -2: mullw r10,r11,r4 # to get an estimate of the quotient, - mulhwu r9,r11,r4 # multiply the estimate by the divisor, - subfc r6,r10,r6 # take the product from the divisor, - add r8,r8,r11 # and add the estimate to the accumulated - subfe. r5,r9,r5 # quotient - bne 1b -3: cmplw r6,r4 - blt 4f - divwu r0,r6,r4 # perform the remaining 32-bit division - mullw r10,r0,r4 # and get the remainder - add r8,r8,r0 - subf r6,r10,r6 -4: stw r7,0(r3) # return the quotient in *r3 - stw r8,4(r3) - mr r3,r6 # return the remainder in r3 - blr diff --git a/arch/ppc/boot/lib/kbd.c b/arch/ppc/boot/lib/kbd.c deleted file mode 100644 index 3931727434d..00000000000 --- a/arch/ppc/boot/lib/kbd.c +++ /dev/null @@ -1,248 +0,0 @@ -#include <linux/keyboard.h> - -#include "defkeymap.c" /* yeah I know it's bad -- Cort */ - - -unsigned char shfts, ctls, alts, caps; - -#define KBDATAP 0x60 /* kbd data port */ -#define KBSTATUSPORT 0x61 /* kbd status */ -#define KBSTATP 0x64 /* kbd status port */ -#define KBINRDY 0x01 -#define KBOUTRDY 0x02 - -extern unsigned char inb(int port); -extern void outb(int port, char val); -extern void puts(const char *); -extern void puthex(unsigned long val); -extern void udelay(long x); - -static int kbd(int noblock) -{ - unsigned char dt, brk, val; - unsigned code; -loop: - if (noblock) { - if ((inb(KBSTATP) & KBINRDY) == 0) - return (-1); - } else while((inb(KBSTATP) & KBINRDY) == 0) ; - - dt = inb(KBDATAP); - - brk = dt & 0x80; /* brk == 1 on key release */ - dt = dt & 0x7f; /* keycode */ - - if (shfts) - code = shift_map[dt]; - else if (ctls) - code = ctrl_map[dt]; - else - code = plain_map[dt]; - - val = KVAL(code); - switch (KTYP(code) & 0x0f) { - case KT_LATIN: - if (brk) - break; - if (alts) - val |= 0x80; - if (val == 0x7f) /* map delete to backspace */ - val = '\b'; - return val; - - case KT_LETTER: - if (brk) - break; - if (caps) - val -= 'a'-'A'; - return val; - - case KT_SPEC: - if (brk) - break; - if (val == KVAL(K_CAPS)) - caps = !caps; - else if (val == KVAL(K_ENTER)) { -enter: /* Wait for key up */ - while (1) { - while((inb(KBSTATP) & KBINRDY) == 0) ; - dt = inb(KBDATAP); - if (dt & 0x80) /* key up */ break; - } - return 10; - } - break; - - case KT_PAD: - if (brk) - break; - if (val < 10) - return val; - if (val == KVAL(K_PENTER)) - goto enter; - break; - - case KT_SHIFT: - switch (val) { - case KG_SHIFT: - case KG_SHIFTL: - case KG_SHIFTR: - shfts = brk ? 0 : 1; - break; - case KG_ALT: - case KG_ALTGR: - alts = brk ? 0 : 1; - break; - case KG_CTRL: - case KG_CTRLL: - case KG_CTRLR: - ctls = brk ? 0 : 1; - break; - } - break; - - case KT_LOCK: - switch (val) { - case KG_SHIFT: - case KG_SHIFTL: - case KG_SHIFTR: - if (brk) - shfts = !shfts; - break; - case KG_ALT: - case KG_ALTGR: - if (brk) - alts = !alts; - break; - case KG_CTRL: - case KG_CTRLL: - case KG_CTRLR: - if (brk) - ctls = !ctls; - break; - } - break; - } - if (brk) return (-1); /* Ignore initial 'key up' codes */ - goto loop; -} - -static int __kbdreset(void) -{ - unsigned char c; - int i, t; - - /* flush input queue */ - t = 2000; - while ((inb(KBSTATP) & KBINRDY)) - { - (void)inb(KBDATAP); - if (--t == 0) - return 1; - } - /* Send self-test */ - t = 20000; - while (inb(KBSTATP) & KBOUTRDY) - if (--t == 0) - return 2; - outb(KBSTATP,0xAA); - t = 200000; - while ((inb(KBSTATP) & KBINRDY) == 0) /* wait input ready */ - if (--t == 0) - return 3; - if ((c = inb(KBDATAP)) != 0x55) - { - puts("Keyboard self test failed - result:"); - puthex(c); - puts("\n"); - } - /* Enable interrupts and keyboard controller */ - t = 20000; - while (inb(KBSTATP) & KBOUTRDY) - if (--t == 0) return 4; - outb(KBSTATP,0x60); - t = 20000; - while (inb(KBSTATP) & KBOUTRDY) - if (--t == 0) return 5; - outb(KBDATAP,0x45); - for (i = 0; i < 10000; i++) udelay(1); - - t = 20000; - while (inb(KBSTATP) & KBOUTRDY) - if (--t == 0) return 6; - outb(KBSTATP,0x20); - t = 200000; - while ((inb(KBSTATP) & KBINRDY) == 0) /* wait input ready */ - if (--t == 0) return 7; - if (! (inb(KBDATAP) & 0x40)) { - /* - * Quote from PS/2 System Reference Manual: - * - * "Address hex 0060 and address hex 0064 should be - * written only when the input-buffer-full bit and - * output-buffer-full bit in the Controller Status - * register are set 0." (KBINRDY and KBOUTRDY) - */ - t = 200000; - while (inb(KBSTATP) & (KBINRDY | KBOUTRDY)) - if (--t == 0) return 8; - outb(KBDATAP,0xF0); - t = 200000; - while (inb(KBSTATP) & (KBINRDY | KBOUTRDY)) - if (--t == 0) return 9; - outb(KBDATAP,0x01); - } - t = 20000; - while (inb(KBSTATP) & KBOUTRDY) - if (--t == 0) return 10; - outb(KBSTATP,0xAE); - return 0; -} - -static void kbdreset(void) -{ - int ret = __kbdreset(); - - if (ret) { - puts("__kbdreset failed: "); - puthex(ret); - puts("\n"); - } -} - -/* We have to actually read the keyboard when CRT_tstc is called, - * since the pending data might be a key release code, and therefore - * not valid data. In this case, kbd() will return -1, even though there's - * data to be read. Of course, we might actually read a valid key press, - * in which case it gets queued into key_pending for use by CRT_getc. - */ - -static int kbd_reset = 0; - -static int key_pending = -1; - -int CRT_getc(void) -{ - int c; - if (!kbd_reset) {kbdreset(); kbd_reset++; } - - if (key_pending != -1) { - c = key_pending; - key_pending = -1; - return c; - } else { - while ((c = kbd(0)) == 0) ; - return c; - } -} - -int CRT_tstc(void) -{ - if (!kbd_reset) {kbdreset(); kbd_reset++; } - - while (key_pending == -1 && ((inb(KBSTATP) & KBINRDY) != 0)) { - key_pending = kbd(1); - } - - return (key_pending != -1); -} diff --git a/arch/ppc/boot/lib/vreset.c b/arch/ppc/boot/lib/vreset.c deleted file mode 100644 index 98539e9f7f9..00000000000 --- a/arch/ppc/boot/lib/vreset.c +++ /dev/null @@ -1,805 +0,0 @@ -/* - * vreset.c - * - * Initialize the VGA control registers to 80x25 text mode. - * - * Adapted from a program by: - * Steve Sellgren - * San Francisco Indigo Company - * sfindigo!sellgren@uunet.uu.net - * - * Original concept by: - * Gary Thomas <gdt@linuxppc.org> - * Adapted for Moto boxes by: - * Pat Kane & Mark Scott, 1996 - * Adapted for IBM portables by: - * Takeshi Ishimoto - * Multi-console support: - * Terje Malmedal <terje.malmedal@usit.uio.no> - */ - -#include "iso_font.h" -#include "nonstdio.h" - -extern char *vidmem; -extern int lines, cols; -struct VaRegs; - -/* - * VGA Register - */ -struct VgaRegs -{ - unsigned short io_port; - unsigned char io_index; - unsigned char io_value; -}; - -void unlockVideo(int slot); -void setTextRegs(struct VgaRegs *svp); -void setTextCLUT(int shift); -void clearVideoMemory(void); -void loadFont(unsigned char *ISA_mem); - -static void mdelay(int ms) -{ - for (; ms > 0; --ms) - udelay(1000); -} - -/* - * Default console text mode registers used to reset - * graphics adapter. - */ -#define NREGS 54 -#define ENDMK 0xFFFF /* End marker */ - -#define S3Vendor 0x5333 -#define CirrusVendor 0x1013 -#define DiamondVendor 0x100E -#define MatroxVendor 0x102B -#define ParadiseVendor 0x101C - -struct VgaRegs GenVgaTextRegs[NREGS+1] = { - /* port index value */ - /* SR Regs */ - { 0x3c4, 0x1, 0x0 }, - { 0x3c4, 0x2, 0x3 }, - { 0x3c4, 0x3, 0x0 }, - { 0x3c4, 0x4, 0x2 }, - /* CR Regs */ - { 0x3d4, 0x0, 0x5f }, - { 0x3d4, 0x1, 0x4f }, - { 0x3d4, 0x2, 0x50 }, - { 0x3d4, 0x3, 0x82 }, - { 0x3d4, 0x4, 0x55 }, - { 0x3d4, 0x5, 0x81 }, - { 0x3d4, 0x6, 0xbf }, - { 0x3d4, 0x7, 0x1f }, - { 0x3d4, 0x8, 0x00 }, - { 0x3d4, 0x9, 0x4f }, - { 0x3d4, 0xa, 0x0d }, - { 0x3d4, 0xb, 0x0e }, - { 0x3d4, 0xc, 0x00 }, - { 0x3d4, 0xd, 0x00 }, - { 0x3d4, 0xe, 0x00 }, - { 0x3d4, 0xf, 0x00 }, - { 0x3d4, 0x10, 0x9c }, - { 0x3d4, 0x11, 0x8e }, - { 0x3d4, 0x12, 0x8f }, - { 0x3d4, 0x13, 0x28 }, - { 0x3d4, 0x14, 0x1f }, - { 0x3d4, 0x15, 0x96 }, - { 0x3d4, 0x16, 0xb9 }, - { 0x3d4, 0x17, 0xa3 }, - /* GR Regs */ - { 0x3ce, 0x0, 0x0 }, - { 0x3ce, 0x1, 0x0 }, - { 0x3ce, 0x2, 0x0 }, - { 0x3ce, 0x3, 0x0 }, - { 0x3ce, 0x4, 0x0 }, - { 0x3ce, 0x5, 0x10 }, - { 0x3ce, 0x6, 0xe }, - { 0x3ce, 0x7, 0x0 }, - { 0x3ce, 0x8, 0xff }, - { ENDMK } -}; - -struct RGBColors -{ - unsigned char r, g, b; -}; - -/* - * Default console text mode color table. - * These values were obtained by booting Linux with - * text mode firmware & then dumping the registers. - */ -struct RGBColors TextCLUT[256] = -{ - /* red green blue */ - { 0x0, 0x0, 0x0 }, - { 0x0, 0x0, 0x2a }, - { 0x0, 0x2a, 0x0 }, - { 0x0, 0x2a, 0x2a }, - { 0x2a, 0x0, 0x0 }, - { 0x2a, 0x0, 0x2a }, - { 0x2a, 0x2a, 0x0 }, - { 0x2a, 0x2a, 0x2a }, - { 0x0, 0x0, 0x15 }, - { 0x0, 0x0, 0x3f }, - { 0x0, 0x2a, 0x15 }, - { 0x0, 0x2a, 0x3f }, - { 0x2a, 0x0, 0x15 }, - { 0x2a, 0x0, 0x3f }, - { 0x2a, 0x2a, 0x15 }, - { 0x2a, 0x2a, 0x3f }, - { 0x0, 0x15, 0x0 }, - { 0x0, 0x15, 0x2a }, - { 0x0, 0x3f, 0x0 }, - { 0x0, 0x3f, 0x2a }, - { 0x2a, 0x15, 0x0 }, - { 0x2a, 0x15, 0x2a }, - { 0x2a, 0x3f, 0x0 }, - { 0x2a, 0x3f, 0x2a }, - { 0x0, 0x15, 0x15 }, - { 0x0, 0x15, 0x3f }, - { 0x0, 0x3f, 0x15 }, - { 0x0, 0x3f, 0x3f }, - { 0x2a, 0x15, 0x15 }, - { 0x2a, 0x15, 0x3f }, - { 0x2a, 0x3f, 0x15 }, - { 0x2a, 0x3f, 0x3f }, - { 0x15, 0x0, 0x0 }, - { 0x15, 0x0, 0x2a }, - { 0x15, 0x2a, 0x0 }, - { 0x15, 0x2a, 0x2a }, - { 0x3f, 0x0, 0x0 }, - { 0x3f, 0x0, 0x2a }, - { 0x3f, 0x2a, 0x0 }, - { 0x3f, 0x2a, 0x2a }, - { 0x15, 0x0, 0x15 }, - { 0x15, 0x0, 0x3f }, - { 0x15, 0x2a, 0x15 }, - { 0x15, 0x2a, 0x3f }, - { 0x3f, 0x0, 0x15 }, - { 0x3f, 0x0, 0x3f }, - { 0x3f, 0x2a, 0x15 }, - { 0x3f, 0x2a, 0x3f }, - { 0x15, 0x15, 0x0 }, - { 0x15, 0x15, 0x2a }, - { 0x15, 0x3f, 0x0 }, - { 0x15, 0x3f, 0x2a }, - { 0x3f, 0x15, 0x0 }, - { 0x3f, 0x15, 0x2a }, - { 0x3f, 0x3f, 0x0 }, - { 0x3f, 0x3f, 0x2a }, - { 0x15, 0x15, 0x15 }, - { 0x15, 0x15, 0x3f }, - { 0x15, 0x3f, 0x15 }, - { 0x15, 0x3f, 0x3f }, - { 0x3f, 0x15, 0x15 }, - { 0x3f, 0x15, 0x3f }, - { 0x3f, 0x3f, 0x15 }, - { 0x3f, 0x3f, 0x3f }, - { 0x39, 0xc, 0x5 }, - { 0x15, 0x2c, 0xf }, - { 0x26, 0x10, 0x3d }, - { 0x29, 0x29, 0x38 }, - { 0x4, 0x1a, 0xe }, - { 0x2, 0x1e, 0x3a }, - { 0x3c, 0x25, 0x33 }, - { 0x3c, 0xc, 0x2c }, - { 0x3f, 0x3, 0x2b }, - { 0x1c, 0x9, 0x13 }, - { 0x25, 0x2a, 0x35 }, - { 0x1e, 0xa, 0x38 }, - { 0x24, 0x8, 0x3 }, - { 0x3, 0xe, 0x36 }, - { 0xc, 0x6, 0x2a }, - { 0x26, 0x3, 0x32 }, - { 0x5, 0x2f, 0x33 }, - { 0x3c, 0x35, 0x2f }, - { 0x2d, 0x26, 0x3e }, - { 0xd, 0xa, 0x10 }, - { 0x25, 0x3c, 0x11 }, - { 0xd, 0x4, 0x2e }, - { 0x5, 0x19, 0x3e }, - { 0xc, 0x13, 0x34 }, - { 0x2b, 0x6, 0x24 }, - { 0x4, 0x3, 0xd }, - { 0x2f, 0x3c, 0xc }, - { 0x2a, 0x37, 0x1f }, - { 0xf, 0x12, 0x38 }, - { 0x38, 0xe, 0x2a }, - { 0x12, 0x2f, 0x19 }, - { 0x29, 0x2e, 0x31 }, - { 0x25, 0x13, 0x3e }, - { 0x33, 0x3e, 0x33 }, - { 0x1d, 0x2c, 0x25 }, - { 0x15, 0x15, 0x5 }, - { 0x32, 0x25, 0x39 }, - { 0x1a, 0x7, 0x1f }, - { 0x13, 0xe, 0x1d }, - { 0x36, 0x17, 0x34 }, - { 0xf, 0x15, 0x23 }, - { 0x2, 0x35, 0xd }, - { 0x15, 0x3f, 0xc }, - { 0x14, 0x2f, 0xf }, - { 0x19, 0x21, 0x3e }, - { 0x27, 0x11, 0x2f }, - { 0x38, 0x3f, 0x3c }, - { 0x36, 0x2d, 0x15 }, - { 0x16, 0x17, 0x2 }, - { 0x1, 0xa, 0x3d }, - { 0x1b, 0x11, 0x3f }, - { 0x21, 0x3c, 0xd }, - { 0x1a, 0x39, 0x3d }, - { 0x8, 0xe, 0xe }, - { 0x22, 0x21, 0x23 }, - { 0x1e, 0x30, 0x5 }, - { 0x1f, 0x22, 0x3d }, - { 0x1e, 0x2f, 0xa }, - { 0x0, 0x1c, 0xe }, - { 0x0, 0x1c, 0x15 }, - { 0x0, 0x1c, 0x1c }, - { 0x0, 0x15, 0x1c }, - { 0x0, 0xe, 0x1c }, - { 0x0, 0x7, 0x1c }, - { 0xe, 0xe, 0x1c }, - { 0x11, 0xe, 0x1c }, - { 0x15, 0xe, 0x1c }, - { 0x18, 0xe, 0x1c }, - { 0x1c, 0xe, 0x1c }, - { 0x1c, 0xe, 0x18 }, - { 0x1c, 0xe, 0x15 }, - { 0x1c, 0xe, 0x11 }, - { 0x1c, 0xe, 0xe }, - { 0x1c, 0x11, 0xe }, - { 0x1c, 0x15, 0xe }, - { 0x1c, 0x18, 0xe }, - { 0x1c, 0x1c, 0xe }, - { 0x18, 0x1c, 0xe }, - { 0x15, 0x1c, 0xe }, - { 0x11, 0x1c, 0xe }, - { 0xe, 0x1c, 0xe }, - { 0xe, 0x1c, 0x11 }, - { 0xe, 0x1c, 0x15 }, - { 0xe, 0x1c, 0x18 }, - { 0xe, 0x1c, 0x1c }, - { 0xe, 0x18, 0x1c }, - { 0xe, 0x15, 0x1c }, - { 0xe, 0x11, 0x1c }, - { 0x14, 0x14, 0x1c }, - { 0x16, 0x14, 0x1c }, - { 0x18, 0x14, 0x1c }, - { 0x1a, 0x14, 0x1c }, - { 0x1c, 0x14, 0x1c }, - { 0x1c, 0x14, 0x1a }, - { 0x1c, 0x14, 0x18 }, - { 0x1c, 0x14, 0x16 }, - { 0x1c, 0x14, 0x14 }, - { 0x1c, 0x16, 0x14 }, - { 0x1c, 0x18, 0x14 }, - { 0x1c, 0x1a, 0x14 }, - { 0x1c, 0x1c, 0x14 }, - { 0x1a, 0x1c, 0x14 }, - { 0x18, 0x1c, 0x14 }, - { 0x16, 0x1c, 0x14 }, - { 0x14, 0x1c, 0x14 }, - { 0x14, 0x1c, 0x16 }, - { 0x14, 0x1c, 0x18 }, - { 0x14, 0x1c, 0x1a }, - { 0x14, 0x1c, 0x1c }, - { 0x14, 0x1a, 0x1c }, - { 0x14, 0x18, 0x1c }, - { 0x14, 0x16, 0x1c }, - { 0x0, 0x0, 0x10 }, - { 0x4, 0x0, 0x10 }, - { 0x8, 0x0, 0x10 }, - { 0xc, 0x0, 0x10 }, - { 0x10, 0x0, 0x10 }, - { 0x10, 0x0, 0xc }, - { 0x10, 0x0, 0x8 }, - { 0x10, 0x0, 0x4 }, - { 0x10, 0x0, 0x0 }, - { 0x10, 0x4, 0x0 }, - { 0x10, 0x8, 0x0 }, - { 0x10, 0xc, 0x0 }, - { 0x10, 0x10, 0x0 }, - { 0xc, 0x10, 0x0 }, - { 0x8, 0x10, 0x0 }, - { 0x4, 0x10, 0x0 }, - { 0x0, 0x10, 0x0 }, - { 0x0, 0x10, 0x4 }, - { 0x0, 0x10, 0x8 }, - { 0x0, 0x10, 0xc }, - { 0x0, 0x10, 0x10 }, - { 0x0, 0xc, 0x10 }, - { 0x0, 0x8, 0x10 }, - { 0x0, 0x4, 0x10 }, - { 0x8, 0x8, 0x10 }, - { 0xa, 0x8, 0x10 }, - { 0xc, 0x8, 0x10 }, - { 0xe, 0x8, 0x10 }, - { 0x10, 0x8, 0x10 }, - { 0x10, 0x8, 0xe }, - { 0x10, 0x8, 0xc }, - { 0x10, 0x8, 0xa }, - { 0x10, 0x8, 0x8 }, - { 0x10, 0xa, 0x8 }, - { 0x10, 0xc, 0x8 }, - { 0x10, 0xe, 0x8 }, - { 0x10, 0x10, 0x8 }, - { 0xe, 0x10, 0x8 }, - { 0xc, 0x10, 0x8 }, - { 0xa, 0x10, 0x8 }, - { 0x8, 0x10, 0x8 }, - { 0x8, 0x10, 0xa }, - { 0x8, 0x10, 0xc }, - { 0x8, 0x10, 0xe }, - { 0x8, 0x10, 0x10 }, - { 0x8, 0xe, 0x10 }, - { 0x8, 0xc, 0x10 }, - { 0x8, 0xa, 0x10 }, - { 0xb, 0xb, 0x10 }, - { 0xc, 0xb, 0x10 }, - { 0xd, 0xb, 0x10 }, - { 0xf, 0xb, 0x10 }, - { 0x10, 0xb, 0x10 }, - { 0x10, 0xb, 0xf }, - { 0x10, 0xb, 0xd }, - { 0x10, 0xb, 0xc }, - { 0x10, 0xb, 0xb }, - { 0x10, 0xc, 0xb }, - { 0x10, 0xd, 0xb }, - { 0x10, 0xf, 0xb }, - { 0x10, 0x10, 0xb }, - { 0xf, 0x10, 0xb }, - { 0xd, 0x10, 0xb }, - { 0xc, 0x10, 0xb }, - { 0xb, 0x10, 0xb }, - { 0xb, 0x10, 0xc }, - { 0xb, 0x10, 0xd }, - { 0xb, 0x10, 0xf }, - { 0xb, 0x10, 0x10 }, - { 0xb, 0xf, 0x10 }, - { 0xb, 0xd, 0x10 }, - { 0xb, 0xc, 0x10 }, - { 0x0, 0x0, 0x0 }, - { 0x0, 0x0, 0x0 }, - { 0x0, 0x0, 0x0 }, - { 0x0, 0x0, 0x0 }, - { 0x0, 0x0, 0x0 }, - { 0x0, 0x0, 0x0 }, - { 0x0, 0x0, 0x0 } -}; - -unsigned char AC[21] = { - 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, - 0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F, - 0x0C, 0x00, 0x0F, 0x08, 0x00}; - -static int scanPCI(int start_slt); -static int PCIVendor(int); -#ifdef DEBUG -static void printslots(void); -#endif -extern void puthex(unsigned long); -extern void puts(const char *); -static void unlockS3(void); - -static inline void -outw(int port, unsigned short val) -{ - outb(port, val >> 8); - outb(port+1, val); -} - -int -vga_init(unsigned char *ISA_mem) -{ - int slot; - struct VgaRegs *VgaTextRegs; - - /* See if VGA already in TEXT mode - exit if so! */ - outb(0x3CE, 0x06); - if ((inb(0x3CF) & 0x01) == 0){ - puts("VGA already in text mode\n"); - return 0; - } - - /* If no VGA responding in text mode, then we have some work to do... - */ - slot = -1; - while((slot = scanPCI(slot)) > -1) { /* find video card in use */ - unlockVideo(slot); /* enable I/O to card */ - VgaTextRegs = GenVgaTextRegs; - - switch (PCIVendor(slot)) { - default: - break; - case(S3Vendor): - unlockS3(); - break; - - case(CirrusVendor): - outw(0x3C4, 0x0612); /* unlock ext regs */ - outw(0x3C4, 0x0700); /* reset ext sequence mode */ - break; - - case(ParadiseVendor): /* IBM Portable 850 */ - outw(0x3ce, 0x0f05); /* unlock pardise registers */ - outw(0x3c4, 0x0648); - outw(0x3d4, 0x2985); - outw(0x3d4, 0x34a6); - outb(0x3ce, 0x0b); /* disable linear addressing */ - outb(0x3cf, inb(0x3cf) & ~0x30); - outw(0x3c4, 0x1400); - outb(0x3ce, 0x0e); /* disable 256 color mode */ - outb(0x3cf, inb(0x3cf) & ~0x01); - outb(0xd00, 0xff); /* enable auto-centering */ - if (!(inb(0xd01) & 0x03)) { - outb(0x3d4, 0x33); - outb(0x3d5, inb(0x3d5) & ~0x90); - outb(0x3d4, 0x32); - outb(0x3d5, inb(0x3d5) | 0x04); - outw(0x3d4, 0x0250); - outw(0x3d4, 0x07ba); - outw(0x3d4, 0x0900); - outw(0x3d4, 0x15e7); - outw(0x3d4, 0x2a95); - } - outw(0x3d4, 0x34a0); - break; - - #if 0 /* Untested - probably doesn't work */ - case(MatroxVendor): - case(DiamondVendor): - puts("VGA Chip Vendor ID: "); - puthex(PCIVendor(slot)); - puts("\n"); - mdelay(1000); - #endif - }; - - outw(0x3C4, 0x0120); /* disable video */ - setTextRegs(VgaTextRegs); /* initial register setup */ - setTextCLUT(0); /* load color lookup table */ - loadFont(ISA_mem); /* load font */ - setTextRegs(VgaTextRegs); /* reload registers */ - outw(0x3C4, 0x0100); /* re-enable video */ - clearVideoMemory(); - - if (PCIVendor(slot) == S3Vendor) { - outb(0x3c2, 0x63); /* MISC */ - } /* endif */ - - #ifdef DEBUG - printslots(); - mdelay(5000); - #endif - - mdelay(1000); /* give time for the video monitor to come up */ - } - return (1); /* 'CRT' I/O supported */ -} - -/* - * Write to VGA Attribute registers. - */ -void -writeAttr(unsigned char index, unsigned char data, unsigned char videoOn) -{ - unsigned char v; - v = inb(0x3da); /* reset attr. address toggle */ - if (videoOn) - outb(0x3c0, (index & 0x1F) | 0x20); - else - outb(0x3c0, (index & 0x1F)); - outb(0x3c0, data); -} - -void -setTextRegs(struct VgaRegs *svp) -{ - int i; - - /* - * saved settings - */ - while( svp->io_port != ENDMK ) { - outb(svp->io_port, svp->io_index); - outb(svp->io_port+1, svp->io_value); - svp++; - } - - outb(0x3c2, 0x67); /* MISC */ - outb(0x3c6, 0xff); /* MASK */ - - for ( i = 0; i < 0x10; i++) - writeAttr(i, AC[i], 0); /* palette */ - writeAttr(0x10, 0x0c, 0); /* text mode */ - writeAttr(0x11, 0x00, 0); /* overscan color (border) */ - writeAttr(0x12, 0x0f, 0); /* plane enable */ - writeAttr(0x13, 0x08, 0); /* pixel panning */ - writeAttr(0x14, 0x00, 1); /* color select; video on */ -} - -void -setTextCLUT(int shift) -{ - int i; - - outb(0x3C6, 0xFF); - i = inb(0x3C7); - outb(0x3C8, 0); - i = inb(0x3C7); - - for ( i = 0; i < 256; i++) { - outb(0x3C9, TextCLUT[i].r << shift); - outb(0x3C9, TextCLUT[i].g << shift); - outb(0x3C9, TextCLUT[i].b << shift); - } -} - -void -loadFont(unsigned char *ISA_mem) -{ - int i, j; - unsigned char *font_page = (unsigned char *) &ISA_mem[0xA0000]; - - outb(0x3C2, 0x67); - /* - * Load font - */ - i = inb(0x3DA); /* Reset Attr toggle */ - - outb(0x3C0,0x30); - outb(0x3C0, 0x01); /* graphics mode */ - - outw(0x3C4, 0x0001); /* reset sequencer */ - outw(0x3C4, 0x0204); /* write to plane 2 */ - outw(0x3C4, 0x0406); /* enable plane graphics */ - outw(0x3C4, 0x0003); /* reset sequencer */ - outw(0x3CE, 0x0402); /* read plane 2 */ - outw(0x3CE, 0x0500); /* write mode 0, read mode 0 */ - outw(0x3CE, 0x0605); /* set graphics mode */ - - for (i = 0; i < sizeof(font); i += 16) { - for (j = 0; j < 16; j++) { - __asm__ volatile("eieio"); - font_page[(2*i)+j] = font[i+j]; - } - } -} - -static void -unlockS3(void) -{ - int s3_device_id; - outw(0x3d4, 0x3848); - outw(0x3d4, 0x39a5); - outb(0x3d4, 0x2d); - s3_device_id = inb(0x3d5) << 8; - outb(0x3d4, 0x2e); - s3_device_id |= inb(0x3d5); - - if (s3_device_id != 0x8812) { - /* From the S3 manual */ - outb(0x46E8, 0x10); /* Put into setup mode */ - outb(0x3C3, 0x10); - outb(0x102, 0x01); /* Enable registers */ - outb(0x46E8, 0x08); /* Enable video */ - outb(0x3C3, 0x08); - outb(0x4AE8, 0x00); - -#if 0 - outb(0x42E8, 0x80); /* Reset graphics engine? */ -#endif - - outb(0x3D4, 0x38); /* Unlock all registers */ - outb(0x3D5, 0x48); - outb(0x3D4, 0x39); - outb(0x3D5, 0xA5); - outb(0x3D4, 0x40); - outb(0x3D5, inb(0x3D5)|0x01); - outb(0x3D4, 0x33); - outb(0x3D5, inb(0x3D5)&~0x52); - outb(0x3D4, 0x35); - outb(0x3D5, inb(0x3D5)&~0x30); - outb(0x3D4, 0x3A); - outb(0x3D5, 0x00); - outb(0x3D4, 0x53); - outb(0x3D5, 0x00); - outb(0x3D4, 0x31); - outb(0x3D5, inb(0x3D5)&~0x4B); - outb(0x3D4, 0x58); - - outb(0x3D5, 0); - - outb(0x3D4, 0x54); - outb(0x3D5, 0x38); - outb(0x3D4, 0x60); - outb(0x3D5, 0x07); - outb(0x3D4, 0x61); - outb(0x3D5, 0x80); - outb(0x3D4, 0x62); - outb(0x3D5, 0xA1); - outb(0x3D4, 0x69); /* High order bits for cursor address */ - outb(0x3D5, 0); - - outb(0x3D4, 0x32); - outb(0x3D5, inb(0x3D5)&~0x10); - } else { - outw(0x3c4, 0x0806); /* IBM Portable 860 */ - outw(0x3c4, 0x1041); - outw(0x3c4, 0x1128); - outw(0x3d4, 0x4000); - outw(0x3d4, 0x3100); - outw(0x3d4, 0x3a05); - outw(0x3d4, 0x6688); - outw(0x3d4, 0x5800); /* disable linear addressing */ - outw(0x3d4, 0x4500); /* disable H/W cursor */ - outw(0x3c4, 0x5410); /* enable auto-centering */ - outw(0x3c4, 0x561f); - outw(0x3c4, 0x1b80); /* lock DCLK selection */ - outw(0x3d4, 0x3900); /* lock S3 registers */ - outw(0x3d4, 0x3800); - } /* endif */ -} - -/* - * cursor() sets an offset (0-1999) into the 80x25 text area. - */ -void -cursor(int x, int y) -{ - int pos = (y*cols)+x; - outb(0x3D4, 14); - outb(0x3D5, pos >> 8); - outb(0x3D4, 15); - outb(0x3D5, pos); -} - -void -clearVideoMemory(void) -{ - int i, j; - for (i = 0; i < lines; i++) { - for (j = 0; j < cols; j++) { - vidmem[((i*cols)+j)*2] = 0x20; /* fill with space character */ - vidmem[((i*cols)+j)*2+1] = 0x07; /* set bg & fg attributes */ - } - } -} - -/* ============ */ - - -#define NSLOTS 8 -#define NPCIREGS 5 - - -/* - should use devfunc number/indirect method to be totally safe on - all machines, this works for now on 3 slot Moto boxes -*/ - -struct PCI_ConfigInfo { - unsigned long * config_addr; - unsigned long regs[NPCIREGS]; -} PCI_slots [NSLOTS] = { - - { (unsigned long *)0x80808000, {0xDEADBEEF,} }, /* onboard */ - { (unsigned long *)0x80800800, {0xDEADBEEF,} }, /* onboard */ - { (unsigned long *)0x80801000, {0xDEADBEEF,} }, /* onboard */ - { (unsigned long *)0x80802000, {0xDEADBEEF,} }, /* onboard */ - { (unsigned long *)0x80804000, {0xDEADBEEF,} }, /* onboard */ - { (unsigned long *)0x80810000, {0xDEADBEEF,} }, /* slot A/1 */ - { (unsigned long *)0x80820000, {0xDEADBEEF,} }, /* slot B/2 */ - { (unsigned long *)0x80840000, {0xDEADBEEF,} } /* slot C/3 */ -}; - - - -/* - * The following code modifies the PCI Command register - * to enable memory and I/O accesses. - */ -void -unlockVideo(int slot) -{ - volatile unsigned char * ppci; - - ppci = (unsigned char * )PCI_slots[slot].config_addr; - ppci[4] = 0x0003; /* enable memory and I/O accesses */ - ppci[0x10] = 0x00000; /* turn off memory mapping */ - ppci[0x11] = 0x00000; /* mem_base = 0 */ - ppci[0x12] = 0x00000; - ppci[0x13] = 0x00000; - __asm__ volatile("eieio"); - - outb(0x3d4, 0x11); - outb(0x3d5, 0x0e); /* unlock CR0-CR7 */ -} - -long -SwapBytes(long lv) /* turn little endian into big indian long */ -{ - long t; - t = (lv&0x000000FF) << 24; - t |= (lv&0x0000FF00) << 8; - t |= (lv&0x00FF0000) >> 8; - t |= (lv&0xFF000000) >> 24; - return(t); -} - - -#define DEVID 0 -#define CMD 1 -#define CLASS 2 -#define MEMBASE 4 - -int -scanPCI(int start_slt) -{ - int slt, r; - struct PCI_ConfigInfo *pslot; - int theSlot = -1; - int highVgaSlot = 0; - - for ( slt = start_slt + 1; slt < NSLOTS; slt++) { - pslot = &PCI_slots[slt]; - for ( r = 0; r < NPCIREGS; r++) { - pslot->regs[r] = SwapBytes ( pslot->config_addr[r] ); - } - /* card in slot ? */ - if ( pslot->regs[DEVID] != 0xFFFFFFFF ) { - /* VGA ? */ - if ( ((pslot->regs[CLASS] & 0xFFFFFF00) == 0x03000000) || - ((pslot->regs[CLASS] & 0xFFFFFF00) == 0x00010000)) { - highVgaSlot = slt; - /* did firmware enable it ? */ - if ( (pslot->regs[CMD] & 0x03) ) { - theSlot = slt; - break; - } - } - } - } - - return ( theSlot ); -} - -/* return Vendor ID of card in the slot */ -static -int PCIVendor(int slotnum) { - struct PCI_ConfigInfo *pslot; - - pslot = &PCI_slots[slotnum]; - -return (pslot->regs[DEVID] & 0xFFFF); -} - -#ifdef DEBUG -static -void printslots(void) -{ - int i; -#if 0 - struct PCI_ConfigInfo *pslot; -#endif - for(i=0; i < NSLOTS; i++) { -#if 0 - pslot = &PCI_slots[i]; - printf("Slot: %d, Addr: %x, Vendor: %08x, Class: %08x\n", - i, pslot->config_addr, pslot->regs[0], pslot->regs[2]); -#else - puts("PCI Slot number: "); puthex(i); - puts(" Vendor ID: "); - puthex(PCIVendor(i)); puts("\n"); -#endif - } -} -#endif /* DEBUG */ diff --git a/arch/ppc/boot/of1275/Makefile b/arch/ppc/boot/of1275/Makefile deleted file mode 100644 index 0b979c00497..00000000000 --- a/arch/ppc/boot/of1275/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile of1275 stuff -# - -lib-y := claim.o enter.o exit.o finddevice.o getprop.o ofinit.o \ - ofstdio.o read.o release.o write.o map.o call_prom.o diff --git a/arch/ppc/boot/of1275/call_prom.c b/arch/ppc/boot/of1275/call_prom.c deleted file mode 100644 index 9479a3a2b8c..00000000000 --- a/arch/ppc/boot/of1275/call_prom.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) 1996-2005 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "of1275.h" -#include <stdarg.h> - -int call_prom(const char *service, int nargs, int nret, ...) -{ - int i; - struct prom_args { - const char *service; - int nargs; - int nret; - unsigned int args[12]; - } args; - va_list list; - - args.service = service; - args.nargs = nargs; - args.nret = nret; - - va_start(list, nret); - for (i = 0; i < nargs; i++) - args.args[i] = va_arg(list, unsigned int); - va_end(list); - - for (i = 0; i < nret; i++) - args.args[nargs+i] = 0; - - if (of_prom_entry(&args) < 0) - return -1; - - return (nret > 0)? args.args[nargs]: 0; -} - -int call_prom_ret(const char *service, int nargs, int nret, - unsigned int *rets, ...) -{ - int i; - struct prom_args { - const char *service; - int nargs; - int nret; - unsigned int args[12]; - } args; - va_list list; - - args.service = service; - args.nargs = nargs; - args.nret = nret; - - va_start(list, rets); - for (i = 0; i < nargs; i++) - args.args[i] = va_arg(list, unsigned int); - va_end(list); - - for (i = 0; i < nret; i++) - args.args[nargs+i] = 0; - - if (of_prom_entry(&args) < 0) - return -1; - - if (rets != (void *) 0) - for (i = 1; i < nret; ++i) - rets[i-1] = args.args[nargs+i]; - - return (nret > 0)? args.args[nargs]: 0; -} diff --git a/arch/ppc/boot/of1275/claim.c b/arch/ppc/boot/of1275/claim.c deleted file mode 100644 index 1ed3aeeff8a..00000000000 --- a/arch/ppc/boot/of1275/claim.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * Copyright (C) Leigh Brown 2002. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "of1275.h" -#include "nonstdio.h" - -/* - * Older OF's require that when claiming a specific range of addresses, - * we claim the physical space in the /memory node and the virtual - * space in the chosen mmu node, and then do a map operation to - * map virtual to physical. - */ -static int need_map = -1; -static ihandle chosen_mmu; -static phandle memory; - -/* returns true if s2 is a prefix of s1 */ -static int string_match(const char *s1, const char *s2) -{ - for (; *s2; ++s2) - if (*s1++ != *s2) - return 0; - return 1; -} - -static int check_of_version(void) -{ - phandle oprom, chosen; - char version[64]; - - oprom = finddevice("/openprom"); - if (oprom == OF_INVALID_HANDLE) - return 0; - if (getprop(oprom, "model", version, sizeof(version)) <= 0) - return 0; - version[sizeof(version)-1] = 0; - printf("OF version = '%s'\n", version); - if (!string_match(version, "Open Firmware, 1.") - && !string_match(version, "FirmWorks,3.")) - return 0; - chosen = finddevice("/chosen"); - if (chosen == OF_INVALID_HANDLE) { - chosen = finddevice("/chosen@0"); - if (chosen == OF_INVALID_HANDLE) { - printf("no chosen\n"); - return 0; - } - } - if (getprop(chosen, "mmu", &chosen_mmu, sizeof(chosen_mmu)) <= 0) { - printf("no mmu\n"); - return 0; - } - memory = (ihandle) call_prom("open", 1, 1, "/memory"); - if (memory == OF_INVALID_HANDLE) { - memory = (ihandle) call_prom("open", 1, 1, "/memory@0"); - if (memory == OF_INVALID_HANDLE) { - printf("no memory node\n"); - return 0; - } - } - printf("old OF detected\n"); - return 1; -} - -void *claim(unsigned int virt, unsigned int size, unsigned int align) -{ - int ret; - unsigned int result; - - if (need_map < 0) - need_map = check_of_version(); - if (align || !need_map) - return (void *) call_prom("claim", 3, 1, virt, size, align); - - ret = call_prom_ret("call-method", 5, 2, &result, "claim", memory, - align, size, virt); - if (ret != 0 || result == -1) - return (void *) -1; - ret = call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu, - align, size, virt); - /* 0x12 == coherent + read/write */ - ret = call_prom("call-method", 6, 1, "map", chosen_mmu, - 0x12, size, virt, virt); - return virt; -} diff --git a/arch/ppc/boot/of1275/enter.c b/arch/ppc/boot/of1275/enter.c deleted file mode 100644 index abe87a8fe2d..00000000000 --- a/arch/ppc/boot/of1275/enter.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * Copyright (C) Leigh Brown 2002. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "of1275.h" - -void -enter(void) -{ - struct prom_args { - char *service; - } args; - - args.service = "enter"; - (*of_prom_entry)(&args); -} diff --git a/arch/ppc/boot/of1275/exit.c b/arch/ppc/boot/of1275/exit.c deleted file mode 100644 index b9f89b6a8b4..00000000000 --- a/arch/ppc/boot/of1275/exit.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * Copyright (C) Leigh Brown 2002. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "of1275.h" - -void -exit(void) -{ - struct prom_args { - char *service; - } args; - - for (;;) { - args.service = "exit"; - (*of_prom_entry)(&args); - } -} diff --git a/arch/ppc/boot/of1275/finddevice.c b/arch/ppc/boot/of1275/finddevice.c deleted file mode 100644 index 0dcb1201b77..00000000000 --- a/arch/ppc/boot/of1275/finddevice.c +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * Copyright (C) Leigh Brown 2002. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "of1275.h" - -phandle finddevice(const char *name) -{ - return (phandle) call_prom("finddevice", 1, 1, name); -} diff --git a/arch/ppc/boot/of1275/getprop.c b/arch/ppc/boot/of1275/getprop.c deleted file mode 100644 index 0cf75f035e4..00000000000 --- a/arch/ppc/boot/of1275/getprop.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * Copyright (C) Leigh Brown 2002. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "of1275.h" - -int -getprop(phandle node, const char *name, void *buf, int buflen) -{ - struct prom_args { - char *service; - int nargs; - int nret; - phandle node; - const char *name; - void *buf; - int buflen; - int size; - } args; - - args.service = "getprop"; - args.nargs = 4; - args.nret = 1; - args.node = node; - args.name = name; - args.buf = buf; - args.buflen = buflen; - args.size = -1; - (*of_prom_entry)(&args); - return args.size; -} diff --git a/arch/ppc/boot/of1275/map.c b/arch/ppc/boot/of1275/map.c deleted file mode 100644 index 443256c6f6d..00000000000 --- a/arch/ppc/boot/of1275/map.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * Copyright (C) Leigh Brown 2002. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "of1275.h" -#include "nonstdio.h" - -extern ihandle of_prom_mmu; - -int -map(unsigned int phys, unsigned int virt, unsigned int size) -{ - struct prom_args { - char *service; - int nargs; - int nret; - char *method; - ihandle mmu_ihandle; - int misc; - unsigned int size; - unsigned int virt; - unsigned int phys; - int ret0; - } args; - - if (of_prom_mmu == 0) { - printf("map() called, no MMU found\n"); - return -1; - } - args.service = "call-method"; - args.nargs = 6; - args.nret = 1; - args.method = "map"; - args.mmu_ihandle = of_prom_mmu; - args.misc = 0; - args.phys = phys; - args.virt = virt; - args.size = size; - (*of_prom_entry)(&args); - - return (int)args.ret0; -} diff --git a/arch/ppc/boot/of1275/ofinit.c b/arch/ppc/boot/of1275/ofinit.c deleted file mode 100644 index 0ee8af7639e..00000000000 --- a/arch/ppc/boot/of1275/ofinit.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * Copyright (C) Leigh Brown 2002. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "of1275.h" - -prom_entry of_prom_entry; -ihandle of_prom_mmu; - -void -ofinit(prom_entry prom_ptr) -{ - phandle chosen; - - of_prom_entry = prom_ptr; - - if ((chosen = finddevice("/chosen")) == OF_INVALID_HANDLE) - return; - if (getprop(chosen, "mmu", &of_prom_mmu, sizeof(ihandle)) != 4) - return; -} diff --git a/arch/ppc/boot/of1275/ofstdio.c b/arch/ppc/boot/of1275/ofstdio.c deleted file mode 100644 index 10abbe32b31..00000000000 --- a/arch/ppc/boot/of1275/ofstdio.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * Copyright (C) Leigh Brown 2002. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "of1275.h" - -int -ofstdio(ihandle *stdin, ihandle *stdout, ihandle *stderr) -{ - ihandle in, out; - phandle chosen; - - if ((chosen = finddevice("/chosen")) == OF_INVALID_HANDLE) - goto err; - if (getprop(chosen, "stdout", &out, sizeof(out)) != 4) - goto err; - if (getprop(chosen, "stdin", &in, sizeof(in)) != 4) - goto err; - - *stdin = in; - *stdout = out; - *stderr = out; - return 0; -err: - return -1; -} diff --git a/arch/ppc/boot/of1275/read.c b/arch/ppc/boot/of1275/read.c deleted file mode 100644 index 122813649fc..00000000000 --- a/arch/ppc/boot/of1275/read.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * Copyright (C) Leigh Brown 2002. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "of1275.h" - -int -read(ihandle instance, void *buf, int buflen) -{ - struct prom_args { - char *service; - int nargs; - int nret; - ihandle instance; - void *buf; - int buflen; - int actual; - } args; - - args.service = "read"; - args.nargs = 3; - args.nret = 1; - args.instance = instance; - args.buf = buf; - args.buflen = buflen; - args.actual = -1; - (*of_prom_entry)(&args); - return args.actual; -} diff --git a/arch/ppc/boot/of1275/release.c b/arch/ppc/boot/of1275/release.c deleted file mode 100644 index 28032d37145..00000000000 --- a/arch/ppc/boot/of1275/release.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * Copyright (C) Leigh Brown 2002. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "of1275.h" - -void -release(void *virt, unsigned int size) -{ - struct prom_args { - char *service; - int nargs; - int nret; - void *virt; - unsigned int size; - } args; - - args.service = "release"; - args.nargs = 2; - args.nret = 0; - args.virt = virt; - args.size = size; - (*of_prom_entry)(&args); -} diff --git a/arch/ppc/boot/of1275/write.c b/arch/ppc/boot/of1275/write.c deleted file mode 100644 index 7361b9b2fca..00000000000 --- a/arch/ppc/boot/of1275/write.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * Copyright (C) Leigh Brown 2002. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "of1275.h" - -int -write(ihandle instance, void *buf, int buflen) -{ - struct prom_args { - char *service; - int nargs; - int nret; - ihandle instance; - void *buf; - int buflen; - int actual; - } args; - - args.service = "write"; - args.nargs = 3; - args.nret = 1; - args.instance = instance; - args.buf = buf; - args.buflen = buflen; - args.actual = -1; - (*of_prom_entry)(&args); - return args.actual; -} diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile deleted file mode 100644 index 5b877792d14..00000000000 --- a/arch/ppc/boot/simple/Makefile +++ /dev/null @@ -1,277 +0,0 @@ -# This is far from simple, but I couldn't think of a good name. This is -# for making the 'zImage' or 'zImage.initrd' on a number of targets. -# -# Author: Tom Rini <trini@mvista.com> -# -# Notes: -# (1) For machines that do not want to use the ELF image directly (including -# stripping just the ELF header off), they must set the variables -# zimage-$(CONFIG_MACHINE) and zimagerd-$(CONFIG_MACHINE) to the target -# that produces the desired image and they must set end-$(CONFIG_MACHINE) -# to what will be suffixed to the image filename. -# (2) Regardless of (1), to have the resulting image be something other -# than 'zImage.elf', set end-$(CONFIG_MACHINE) to be the suffix used for -# the zImage, znetboot, and znetbootrd targets. -# (3) For machine targets which use the mktree program, you can optionally -# set entrypoint-$(CONFIG_MACHINE) to the location which the image should be -# loaded at. The optimal setting for entrypoint-$(CONFIG_MACHINE) is the link -# address. -# (4) It is advisable to pass in the memory size using BI_MEMSIZE and -# get_mem_size(), which is memory controller dependent. Add in the correct -# XXX_memory.o file for this to work, as well as editing the -# misc-$(CONFIG_MACHINE) variable. - -boot := arch/ppc/boot -common := $(boot)/common -utils := $(boot)/utils -bootlib := $(boot)/lib -images := $(boot)/images -of1275 := $(boot)/of1275 -tftpboot := /tftpboot - -# Normally, we use the 'misc.c' file for decompress_kernel and -# whatnot. Sometimes we need to override this however. -misc-y := misc.o - -# Normally, we have our images end in .elf, but something we want to -# change this. -end-y := elf - -# Additionally, we normally don't need to mess with the L2 / L3 caches -# if present on 'classic' PPC. -cacheflag-y := -DCLEAR_CACHES="" -# This file will flush / disable the L2, and L3 if present. -clear_L2_L3 := $(srctree)/$(boot)/simple/clear.S - -# -# See arch/ppc/kconfig and arch/ppc/platforms/Kconfig -# for definition of what platform each config option refer to. -#---------------------------------------------------------------------------- - zimage-$(CONFIG_CPCI690) := zImage-STRIPELF -zimageinitrd-$(CONFIG_CPCI690) := zImage.initrd-STRIPELF - extra.o-$(CONFIG_CPCI690) := misc-cpci690.o - end-$(CONFIG_CPCI690) := cpci690 - cacheflag-$(CONFIG_CPCI690) := -include $(clear_L2_L3) - - zimage-$(CONFIG_IBM_OPENBIOS) := zImage-TREE -zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE - end-$(CONFIG_IBM_OPENBIOS) := treeboot - misc-$(CONFIG_IBM_OPENBIOS) := misc-embedded.o - - end-$(CONFIG_EMBEDDEDBOOT) := embedded - misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o - - zimage-$(CONFIG_BAMBOO) := zImage-TREE -zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE - end-$(CONFIG_BAMBOO) := bamboo - entrypoint-$(CONFIG_BAMBOO) := 0x01000000 - extra.o-$(CONFIG_BAMBOO) := pibs.o - - zimage-$(CONFIG_BUBINGA) := zImage-TREE -zimageinitrd-$(CONFIG_BUBINGA) := zImage.initrd-TREE - end-$(CONFIG_BUBINGA) := bubinga - entrypoint-$(CONFIG_BUBINGA) := 0x01000000 - extra.o-$(CONFIG_BUBINGA) := openbios.o - - zimage-$(CONFIG_EBONY) := zImage-TREE -zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE - end-$(CONFIG_EBONY) := ebony - entrypoint-$(CONFIG_EBONY) := 0x01000000 - extra.o-$(CONFIG_EBONY) := openbios.o - - zimage-$(CONFIG_LUAN) := zImage-TREE -zimageinitrd-$(CONFIG_LUAN) := zImage.initrd-TREE - end-$(CONFIG_LUAN) := luan - entrypoint-$(CONFIG_LUAN) := 0x01000000 - extra.o-$(CONFIG_LUAN) := pibs.o - - zimage-$(CONFIG_YUCCA) := zImage-TREE -zimageinitrd-$(CONFIG_YUCCA) := zImage.initrd-TREE - end-$(CONFIG_YUCCA) := yucca - entrypoint-$(CONFIG_YUCCA) := 0x01000000 - extra.o-$(CONFIG_YUCCA) := pibs.o - - zimage-$(CONFIG_OCOTEA) := zImage-TREE -zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE - end-$(CONFIG_OCOTEA) := ocotea - entrypoint-$(CONFIG_OCOTEA) := 0x01000000 - extra.o-$(CONFIG_OCOTEA) := pibs.o - - zimage-$(CONFIG_SYCAMORE) := zImage-TREE -zimageinitrd-$(CONFIG_SYCAMORE) := zImage.initrd-TREE - end-$(CONFIG_SYCAMORE) := sycamore - entrypoint-$(CONFIG_SYCAMORE) := 0x01000000 - extra.o-$(CONFIG_SYCAMORE) := openbios.o - - zimage-$(CONFIG_WALNUT) := zImage-TREE -zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE - end-$(CONFIG_WALNUT) := walnut - entrypoint-$(CONFIG_WALNUT) := 0x01000000 - extra.o-$(CONFIG_WALNUT) := openbios.o - - extra.o-$(CONFIG_EV64260) := misc-ev64260.o - end-$(CONFIG_EV64260) := ev64260 - cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3) - - extra.o-$(CONFIG_CHESTNUT) := misc-chestnut.o - end-$(CONFIG_CHESTNUT) := chestnut - - extra.o-$(CONFIG_KATANA) := misc-katana.o - end-$(CONFIG_KATANA) := katana - cacheflag-$(CONFIG_KATANA) := -include $(clear_L2_L3) - - extra.o-$(CONFIG_RADSTONE_PPC7D) := misc-radstone_ppc7d.o - end-$(CONFIG_RADSTONE_PPC7D) := radstone_ppc7d - cacheflag-$(CONFIG_RADSTONE_PPC7D) := -include $(clear_L2_L3) - - extra.o-$(CONFIG_EV64360) := misc-ev64360.o - end-$(CONFIG_EV64360) := ev64360 - cacheflag-$(CONFIG_EV64360) := -include $(clear_L2_L3) - -# kconfig 'feature', only one of these will ever be 'y' at a time. -# The rest will be unset. -motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \ -$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS) -motorola := $(strip $(motorola)) - - zimage-$(motorola) := zImage-PPLUS -zimageinitrd-$(motorola) := zImage.initrd-PPLUS - end-$(motorola) := pplus - -# Overrides previous assingment - extra.o-$(CONFIG_PPLUS) := prepmap.o - extra.o-$(CONFIG_LOPEC) := mpc10x_memory.o - -# Really only valid if CONFIG_6xx=y - zimage-$(CONFIG_PPC_PREP) := zImage-PPLUS -zimageinitrd-$(CONFIG_PPC_PREP) := zImage.initrd-PPLUS -ifeq ($(CONFIG_6xx),y) - extra.o-$(CONFIG_PPC_PREP) := prepmap.o - misc-$(CONFIG_PPC_PREP) += misc-prep.o mpc10x_memory.o -endif - end-$(CONFIG_PPC_PREP) := prep - - end-$(CONFIG_SANDPOINT) := sandpoint - cacheflag-$(CONFIG_SANDPOINT) := -include $(clear_L2_L3) - - zimage-$(CONFIG_SPRUCE) := zImage-TREE -zimageinitrd-$(CONFIG_SPRUCE) := zImage.initrd-TREE - end-$(CONFIG_SPRUCE) := spruce - entrypoint-$(CONFIG_SPRUCE) := 0x00800000 - misc-$(CONFIG_SPRUCE) += misc-spruce.o - - zimage-$(CONFIG_LITE5200) := zImage-STRIPELF -zimageinitrd-$(CONFIG_LITE5200) := zImage.initrd-STRIPELF - end-$(CONFIG_LITE5200) := lite5200 - cacheflag-$(CONFIG_LITE5200) := -include $(clear_L2_L3) - - -# SMP images should have a '.smp' suffix. - end-$(CONFIG_SMP) := $(end-y).smp - -# This is a treeboot that needs init functions until the -# boot rom is sorted out (i.e. this is short lived) -EXTRA_AFLAGS := $(extra-aflags-y) -# head.o needs to get the cacheflags defined. -AFLAGS_head.o += $(cacheflag-y) - -# Linker args. This specifies where the image will be run at. -LD_ARGS := -T $(srctree)/$(boot)/ld.script \ - -Ttext $(CONFIG_BOOT_LOAD) -Bstatic -OBJCOPY_ARGS := -O elf32-powerpc - -# head.o and relocate.o must be at the start. -boot-y := head.o relocate.o $(extra.o-y) $(misc-y) -boot-$(CONFIG_REDWOOD_5) += embed_config.o -boot-$(CONFIG_REDWOOD_6) += embed_config.o -boot-$(CONFIG_8xx) += embed_config.o -boot-$(CONFIG_8260) += embed_config.o -boot-$(CONFIG_EP405) += embed_config.o -boot-$(CONFIG_XILINX_ML300) += embed_config.o -boot-$(CONFIG_XILINX_ML403) += embed_config.o -boot-$(CONFIG_BSEIP) += iic.o -boot-$(CONFIG_MBX) += iic.o pci.o qspan_pci.o -boot-$(CONFIG_MV64X60) += misc-mv64x60.o -boot-$(CONFIG_RPXCLASSIC) += iic.o pci.o qspan_pci.o -boot-$(CONFIG_RPXLITE) += iic.o -# Different boards need different serial implementations. -ifeq ($(CONFIG_SERIAL_CPM_CONSOLE),y) -boot-$(CONFIG_8xx) += m8xx_tty.o -boot-$(CONFIG_8260) += m8260_tty.o -endif -boot-$(CONFIG_SERIAL_MPC52xx_CONSOLE) += mpc52xx_tty.o -boot-$(CONFIG_SERIAL_MPSC_CONSOLE) += mv64x60_tty.o -boot-$(CONFIG_SERIAL_UARTLITE_CONSOLE) += uartlite_tty.o - -LIBS := $(common)/lib.a $(bootlib)/lib.a -ifeq ($(CONFIG_PPC_PREP),y) -LIBS += $(of1275)/lib.a -endif - -OBJS := $(addprefix $(obj)/,$(boot-y)) - -# Tools -MKBUGBOOT := $(utils)/mkbugboot -MKPREP := $(utils)/mkprep -MKTREE := $(utils)/mktree - -targets := dummy.o - -$(obj)/zvmlinux: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ - $(images)/vmlinux.gz $(obj)/dummy.o - $(OBJCOPY) $(OBJCOPY_ARGS) \ - --add-section=.image=$(images)/vmlinux.gz \ - --set-section-flags=.image=contents,alloc,load,readonly,data \ - $(obj)/dummy.o $(obj)/image.o - $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS) - $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \ - -R .stabstr -R .ramdisk - -$(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ - $(images)/vmlinux.gz $(obj)/dummy.o - $(OBJCOPY) $(OBJCOPY_ARGS) \ - --add-section=.ramdisk=$(images)/ramdisk.image.gz \ - --set-section-flags=.ramdisk=contents,alloc,load,readonly,data \ - --add-section=.image=$(images)/vmlinux.gz \ - --set-section-flags=.image=contents,alloc,load,readonly,data \ - $(obj)/dummy.o $(obj)/image.o - $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS) - $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \ - -R .stabstr - -# Sort-of dummy rules, that let us format the image we want. -zImage: $(images)/$(zimage-y) $(obj)/zvmlinux - cp -f $(obj)/zvmlinux $(images)/zImage.elf - rm -f $(obj)/zvmlinux - -zImage.initrd: $(images)/$(zimageinitrd-y) $(obj)/zvmlinux.initrd - cp -f $(obj)/zvmlinux.initrd $(images)/zImage.initrd.elf - rm -f $(obj)/zvmlinux.initrd - -znetboot: zImage - cp $(images)/zImage.$(end-y) $(tftpboot)/zImage.$(end-y) - -znetboot.initrd: zImage.initrd - cp $(images)/zImage.initrd.$(end-y) $(tftpboot)/zImage.initrd.$(end-y) - -$(images)/zImage-STRIPELF: $(obj)/zvmlinux - dd if=$(obj)/zvmlinux of=$(images)/zImage.$(end-y) skip=64 bs=1k - -$(images)/zImage.initrd-STRIPELF: $(obj)/zvmlinux.initrd - dd if=$(obj)/zvmlinux.initrd of=$(images)/zImage.initrd.$(end-y) \ - skip=64 bs=1k - -$(images)/zImage-TREE: $(obj)/zvmlinux $(MKTREE) - $(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(entrypoint-y) - -$(images)/zImage.initrd-TREE: $(obj)/zvmlinux.initrd $(MKTREE) - $(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \ - $(entrypoint-y) - -$(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT) - $(MKPREP) -pbp $(obj)/zvmlinux $(images)/zImage.$(end-y) - $(MKBUGBOOT) $(obj)/zvmlinux $(images)/zImage.bugboot - -$(images)/zImage.initrd-PPLUS: $(obj)/zvmlinux.initrd $(MKPREP) $(MKBUGBOOT) - $(MKPREP) -pbp $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) - $(MKBUGBOOT) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.bugboot diff --git a/arch/ppc/boot/simple/chrpmap.c b/arch/ppc/boot/simple/chrpmap.c deleted file mode 100644 index 14d9e05d98b..00000000000 --- a/arch/ppc/boot/simple/chrpmap.c +++ /dev/null @@ -1,12 +0,0 @@ -/* - * 2004 (C) IBM. This file is licensed under the terms of the GNU General - * Public License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <nonstdio.h> - -void board_isa_init(void) -{ - ISA_init(0xFE000000); -} diff --git a/arch/ppc/boot/simple/clear.S b/arch/ppc/boot/simple/clear.S deleted file mode 100644 index 95c5647a0f5..00000000000 --- a/arch/ppc/boot/simple/clear.S +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Code to call _setup_L2CR to flus, invalidate and disable the L2, - * and if present, do the same to the L3. - */ - -#define CLEAR_CACHES \ - bl _setup_L2CR; \ - \ - /* If 745x, turn off L3CR as well */ \ - mfspr r8,SPRN_PVR; \ - srwi r8,r8,16; \ - \ - cmpli cr0,r8,0x8000; /* 7450 */ \ - cmpli cr1,r8,0x8001; /* 7455 */ \ - cmpli cr2,r8,0x8002; /* 7457 */ \ - /* Now test if any are true. */ \ - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq; \ - cror 4*cr0+eq,4*cr0+eq,4*cr2+eq; \ - beql _setup_L3CR diff --git a/arch/ppc/boot/simple/cpc700_memory.c b/arch/ppc/boot/simple/cpc700_memory.c deleted file mode 100644 index d75420a45a5..00000000000 --- a/arch/ppc/boot/simple/cpc700_memory.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Find memory based upon settings in the CPC700 bridge - * - * Author: Dan Cox - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <asm/types.h> -#include <asm/io.h> -#include "cpc700.h" - -unsigned long -cpc700_get_mem_size(void) -{ - int i; - unsigned long len, amt; - - /* Start at MB1EA, since MB0EA will most likely be the ending address - for ROM space. */ - for(len = 0, i = CPC700_MB1EA; i <= CPC700_MB4EA; i+=4) { - amt = cpc700_read_memreg(i); - if (amt == 0) - break; - len = amt; - } - - return len; -} - - diff --git a/arch/ppc/boot/simple/dummy.c b/arch/ppc/boot/simple/dummy.c deleted file mode 100644 index 31dbf45bf99..00000000000 --- a/arch/ppc/boot/simple/dummy.c +++ /dev/null @@ -1,4 +0,0 @@ -int main(void) -{ - return 0; -} diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c deleted file mode 100644 index 3b46792d7b8..00000000000 --- a/arch/ppc/boot/simple/embed_config.c +++ /dev/null @@ -1,938 +0,0 @@ -/* Board specific functions for those embedded 8xx boards that do - * not have boot monitor support for board information. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <asm/reg.h> -#ifdef CONFIG_8xx -#include <asm/mpc8xx.h> -#endif -#ifdef CONFIG_8260 -#include <asm/mpc8260.h> -#include <asm/immap_cpm2.h> -#endif -#ifdef CONFIG_40x -#include <asm/io.h> -#endif -#ifdef CONFIG_XILINX_VIRTEX -#include <platforms/4xx/xparameters/xparameters.h> -#endif -extern unsigned long timebase_period_ns; - -/* For those boards that don't provide one. -*/ -#if !defined(CONFIG_MBX) -static bd_t bdinfo; -#endif - -/* IIC functions. - * These are just the basic master read/write operations so we can - * examine serial EEPROM. - */ -extern void iic_read(uint devaddr, u_char *buf, uint offset, uint count); - -/* Supply a default Ethernet address for those eval boards that don't - * ship with one. This is an address from the MBX board I have, so - * it is unlikely you will find it on your network. - */ -static ushort def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 }; - -#if defined(CONFIG_MBX) - -/* The MBX hands us a pretty much ready to go board descriptor. This - * is where the idea started in the first place. - */ -void -embed_config(bd_t **bdp) -{ - u_char *mp; - u_char eebuf[128]; - int i = 8; - bd_t *bd; - - bd = *bdp; - - /* Read the first 128 bytes of the EEPROM. There is more, - * but this is all we need. - */ - iic_read(0xa4, eebuf, 0, 128); - - /* All we are looking for is the Ethernet MAC address. The - * first 8 bytes are 'MOTOROLA', so check for part of that. - * Next, the VPD describes a MAC 'packet' as being of type 08 - * and size 06. So we look for that and the MAC must follow. - * If there are more than one, we still only care about the first. - * If it's there, assume we have a valid MAC address. If not, - * grab our default one. - */ - if ((*(uint *)eebuf) == 0x4d4f544f) { - while (i < 127 && !(eebuf[i] == 0x08 && eebuf[i + 1] == 0x06)) - i += eebuf[i + 1] + 2; /* skip this packet */ - - if (i == 127) /* Couldn't find. */ - mp = (u_char *)def_enet_addr; - else - mp = &eebuf[i + 2]; - } - else - mp = (u_char *)def_enet_addr; - - for (i=0; i<6; i++) - bd->bi_enetaddr[i] = *mp++; - - /* The boot rom passes these to us in MHz. Linux now expects - * them to be in Hz. - */ - bd->bi_intfreq *= 1000000; - bd->bi_busfreq *= 1000000; - - /* Stuff a baud rate here as well. - */ - bd->bi_baudrate = 9600; -} -#endif /* CONFIG_MBX */ - -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) || \ - defined(CONFIG_RPX8260) || defined(CONFIG_EP405) -/* Helper functions for Embedded Planet boards. -*/ -/* Because I didn't find anything that would do this....... -*/ -u_char -aschex_to_byte(u_char *cp) -{ - u_char byte, c; - - c = *cp++; - - if ((c >= 'A') && (c <= 'F')) { - c -= 'A'; - c += 10; - } else if ((c >= 'a') && (c <= 'f')) { - c -= 'a'; - c += 10; - } else - c -= '0'; - - byte = c * 16; - - c = *cp; - - if ((c >= 'A') && (c <= 'F')) { - c -= 'A'; - c += 10; - } else if ((c >= 'a') && (c <= 'f')) { - c -= 'a'; - c += 10; - } else - c -= '0'; - - byte += c; - - return(byte); -} - -static void -rpx_eth(bd_t *bd, u_char *cp) -{ - int i; - - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = aschex_to_byte(cp); - cp += 2; - } -} - -#ifdef CONFIG_RPX8260 -static uint -rpx_baseten(u_char *cp) -{ - uint retval; - - retval = 0; - - while (*cp != '\n') { - retval *= 10; - retval += (*cp) - '0'; - cp++; - } - return(retval); -} -#endif - -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) -static void -rpx_brate(bd_t *bd, u_char *cp) -{ - uint rate; - - rate = 0; - - while (*cp != '\n') { - rate *= 10; - rate += (*cp) - '0'; - cp++; - } - - bd->bi_baudrate = rate * 100; -} - -static void -rpx_cpuspeed(bd_t *bd, u_char *cp) -{ - uint num, den; - - num = den = 0; - - while (*cp != '\n') { - num *= 10; - num += (*cp) - '0'; - cp++; - if (*cp == '/') { - cp++; - den = (*cp) - '0'; - break; - } - } - - /* I don't know why the RPX just can't state the actual - * CPU speed..... - */ - if (den) { - num /= den; - num *= den; - } - bd->bi_intfreq = bd->bi_busfreq = num * 1000000; - - /* The 8xx can only run a maximum 50 MHz bus speed (until - * Motorola changes this :-). Greater than 50 MHz parts - * run internal/2 for bus speed. - */ - if (num > 50) - bd->bi_busfreq /= 2; -} -#endif - -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) || defined(CONFIG_EP405) -static void -rpx_memsize(bd_t *bd, u_char *cp) -{ - uint size; - - size = 0; - - while (*cp != '\n') { - size *= 10; - size += (*cp) - '0'; - cp++; - } - - bd->bi_memsize = size * 1024 * 1024; -} -#endif /* LITE || CLASSIC || EP405 */ -#if defined(CONFIG_EP405) -static void -rpx_nvramsize(bd_t *bd, u_char *cp) -{ - uint size; - - size = 0; - - while (*cp != '\n') { - size *= 10; - size += (*cp) - '0'; - cp++; - } - - bd->bi_nvramsize = size * 1024; -} -#endif /* CONFIG_EP405 */ - -#endif /* Embedded Planet boards */ - -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) - -/* Read the EEPROM on the RPX-Lite board. -*/ -void -embed_config(bd_t **bdp) -{ - u_char eebuf[256], *cp; - bd_t *bd; - - /* Read the first 256 bytes of the EEPROM. I think this - * is really all there is, and I hope if it gets bigger the - * info we want is still up front. - */ - bd = &bdinfo; - *bdp = bd; - -#if 1 - iic_read(0xa8, eebuf, 0, 128); - iic_read(0xa8, &eebuf[128], 128, 128); - - /* We look for two things, the Ethernet address and the - * serial baud rate. The records are separated by - * newlines. - */ - cp = eebuf; - for (;;) { - if (*cp == 'E') { - cp++; - if (*cp == 'A') { - cp += 2; - rpx_eth(bd, cp); - } - } - if (*cp == 'S') { - cp++; - if (*cp == 'B') { - cp += 2; - rpx_brate(bd, cp); - } - } - if (*cp == 'D') { - cp++; - if (*cp == '1') { - cp += 2; - rpx_memsize(bd, cp); - } - } - if (*cp == 'H') { - cp++; - if (*cp == 'Z') { - cp += 2; - rpx_cpuspeed(bd, cp); - } - } - - /* Scan to the end of the record. - */ - while ((*cp != '\n') && (*cp != 0xff)) - cp++; - - /* If the next character is a 0 or ff, we are done. - */ - cp++; - if ((*cp == 0) || (*cp == 0xff)) - break; - } - bd->bi_memstart = 0; -#else - /* For boards without initialized EEPROM. - */ - bd->bi_memstart = 0; - bd->bi_memsize = (8 * 1024 * 1024); - bd->bi_intfreq = 48000000; - bd->bi_busfreq = 48000000; - bd->bi_baudrate = 9600; -#endif -} -#endif /* RPXLITE || RPXCLASSIC */ - -#ifdef CONFIG_BSEIP -/* Build a board information structure for the BSE ip-Engine. - * There is more to come since we will add some environment - * variables and a function to read them. - */ -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - bd = &bdinfo; - *bdp = bd; - - /* Baud rate and processor speed will eventually come - * from the environment variables. - */ - bd->bi_baudrate = 9600; - - /* Get the Ethernet station address from the Flash ROM. - */ - cp = (u_char *)0xfe003ffa; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } - - /* The rest of this should come from the environment as well. - */ - bd->bi_memstart = 0; - bd->bi_memsize = (16 * 1024 * 1024); - bd->bi_intfreq = 48000000; - bd->bi_busfreq = 48000000; -} -#endif /* BSEIP */ - -#ifdef CONFIG_FADS -/* Build a board information structure for the FADS. - */ -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - bd = &bdinfo; - *bdp = bd; - - /* Just fill in some known values. - */ - bd->bi_baudrate = 9600; - - /* Use default enet. - */ - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } - - bd->bi_memstart = 0; - bd->bi_memsize = (8 * 1024 * 1024); - bd->bi_intfreq = 40000000; - bd->bi_busfreq = 40000000; -} -#endif /* FADS */ - -#ifdef CONFIG_8260 -/* Compute 8260 clock values if the rom doesn't provide them. - */ -static unsigned char bus2core_8260[] = { -/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ - 3, 2, 2, 2, 4, 4, 5, 9, 6, 11, 8, 10, 3, 12, 7, 2, - 6, 5, 13, 2, 14, 4, 15, 2, 3, 11, 8, 10, 16, 12, 7, 2, -}; - -static void -clk_8260(bd_t *bd) -{ - uint scmr, vco_out, clkin; - uint plldf, pllmf, corecnf; - volatile cpm2_map_t *ip; - - ip = (cpm2_map_t *)CPM_MAP_ADDR; - scmr = ip->im_clkrst.car_scmr; - - /* The clkin is always bus frequency. - */ - clkin = bd->bi_busfreq; - - /* Collect the bits from the scmr. - */ - plldf = (scmr >> 12) & 1; - pllmf = scmr & 0xfff; - corecnf = (scmr >> 24) &0x1f; - - /* This is arithmetic from the 8260 manual. - */ - vco_out = clkin / (plldf + 1); - vco_out *= 2 * (pllmf + 1); - bd->bi_vco = vco_out; /* Save for later */ - - bd->bi_cpmfreq = vco_out / 2; /* CPM Freq, in MHz */ - bd->bi_intfreq = bd->bi_busfreq * bus2core_8260[corecnf] / 2; - - /* Set Baud rate divisor. The power up default is divide by 16, - * but we set it again here in case it was changed. - */ - ip->im_clkrst.car_sccr = 1; /* DIV 16 BRG */ - bd->bi_brgfreq = vco_out / 16; -} - -static unsigned char bus2core_8280[] = { -/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ - 3, 2, 2, 2, 4, 4, 5, 9, 6, 11, 8, 10, 3, 12, 7, 2, - 6, 5, 13, 2, 14, 2, 15, 2, 3, 2, 2, 2, 16, 2, 2, 2, -}; - -static void -clk_8280(bd_t *bd) -{ - uint scmr, main_clk, clkin; - uint pllmf, corecnf; - volatile cpm2_map_t *ip; - - ip = (cpm2_map_t *)CPM_MAP_ADDR; - scmr = ip->im_clkrst.car_scmr; - - /* The clkin is always bus frequency. - */ - clkin = bd->bi_busfreq; - - /* Collect the bits from the scmr. - */ - pllmf = scmr & 0xf; - corecnf = (scmr >> 24) & 0x1f; - - /* This is arithmetic from the 8280 manual. - */ - main_clk = clkin * (pllmf + 1); - - bd->bi_cpmfreq = main_clk / 2; /* CPM Freq, in MHz */ - bd->bi_intfreq = bd->bi_busfreq * bus2core_8280[corecnf] / 2; - - /* Set Baud rate divisor. The power up default is divide by 16, - * but we set it again here in case it was changed. - */ - ip->im_clkrst.car_sccr = (ip->im_clkrst.car_sccr & 0x3) | 0x1; - bd->bi_brgfreq = main_clk / 16; -} -#endif - -#ifdef CONFIG_SBC82xx -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - unsigned long pvr; - - bd = *bdp; - - bd = &bdinfo; - *bdp = bd; - bd->bi_baudrate = 9600; - bd->bi_memsize = 256 * 1024 * 1024; /* just a guess */ - - cp = (void*)SBC82xx_MACADDR_NVRAM_SCC1; - memcpy(bd->bi_enetaddr, cp, 6); - - /* can busfreq be calculated? */ - pvr = mfspr(SPRN_PVR); - if ((pvr & 0xffff0000) == 0x80820000) { - bd->bi_busfreq = 100000000; - clk_8280(bd); - } else { - bd->bi_busfreq = 66000000; - clk_8260(bd); - } - -} -#endif /* SBC82xx */ - -#if defined(CONFIG_EST8260) || defined(CONFIG_TQM8260) -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - bd = *bdp; -#if 0 - /* This is actually provided by my boot rom. I have it - * here for those people that may load the kernel with - * a JTAG/COP tool and not the rom monitor. - */ - bd->bi_baudrate = 115200; - bd->bi_intfreq = 200000000; - bd->bi_busfreq = 66666666; - bd->bi_cpmfreq = 66666666; - bd->bi_brgfreq = 33333333; - bd->bi_memsize = 16 * 1024 * 1024; -#else - /* The boot rom passes these to us in MHz. Linux now expects - * them to be in Hz. - */ - bd->bi_intfreq *= 1000000; - bd->bi_busfreq *= 1000000; - bd->bi_cpmfreq *= 1000000; - bd->bi_brgfreq *= 1000000; -#endif - - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } -} -#endif /* EST8260 */ - -#ifdef CONFIG_SBS8260 -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - /* This should provided by the boot rom. - */ - bd = &bdinfo; - *bdp = bd; - bd->bi_baudrate = 9600; - bd->bi_memsize = 64 * 1024 * 1024; - - /* Set all of the clocks. We have to know the speed of the - * external clock. The development board had 66 MHz. - */ - bd->bi_busfreq = 66666666; - clk_8260(bd); - - /* I don't know how to compute this yet. - */ - bd->bi_intfreq = 133000000; - - - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } -} -#endif /* SBS8260 */ - -#ifdef CONFIG_RPX8260 -void -embed_config(bd_t **bdp) -{ - u_char *cp, *keyvals; - int i; - bd_t *bd; - - keyvals = (u_char *)*bdp; - - bd = &bdinfo; - *bdp = bd; - - /* This is almost identical to the RPX-Lite/Classic functions - * on the 8xx boards. It would be nice to have a key lookup - * function in a string, but the format of all of the fields - * is slightly different. - */ - cp = keyvals; - for (;;) { - if (*cp == 'E') { - cp++; - if (*cp == 'A') { - cp += 2; - rpx_eth(bd, cp); - } - } - if (*cp == 'S') { - cp++; - if (*cp == 'B') { - cp += 2; - bd->bi_baudrate = rpx_baseten(cp); - } - } - if (*cp == 'D') { - cp++; - if (*cp == '1') { - cp += 2; - bd->bi_memsize = rpx_baseten(cp) * 1024 * 1024; - } - } - if (*cp == 'X') { - cp++; - if (*cp == 'T') { - cp += 2; - bd->bi_busfreq = rpx_baseten(cp); - } - } - if (*cp == 'N') { - cp++; - if (*cp == 'V') { - cp += 2; - bd->bi_nvsize = rpx_baseten(cp) * 1024 * 1024; - } - } - - /* Scan to the end of the record. - */ - while ((*cp != '\n') && (*cp != 0xff)) - cp++; - - /* If the next character is a 0 or ff, we are done. - */ - cp++; - if ((*cp == 0) || (*cp == 0xff)) - break; - } - bd->bi_memstart = 0; - - /* The memory size includes both the 60x and local bus DRAM. - * I don't want to use the local bus DRAM for real memory, - * so subtract it out. It would be nice if they were separate - * keys. - */ - bd->bi_memsize -= 32 * 1024 * 1024; - - /* Set all of the clocks. We have to know the speed of the - * external clock. - */ - clk_8260(bd); - - /* I don't know how to compute this yet. - */ - bd->bi_intfreq = 200000000; -} -#endif /* RPX6 for testing */ - -#ifdef CONFIG_ADS8260 -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - /* This should provided by the boot rom. - */ - bd = &bdinfo; - *bdp = bd; - bd->bi_baudrate = 9600; - bd->bi_memsize = 16 * 1024 * 1024; - - /* Set all of the clocks. We have to know the speed of the - * external clock. The development board had 66 MHz. - */ - bd->bi_busfreq = 66666666; - clk_8260(bd); - - /* I don't know how to compute this yet. - */ - bd->bi_intfreq = 200000000; - - - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } -} -#endif /* ADS8260 */ - -#ifdef CONFIG_WILLOW -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd; - - /* Willow has Open Firmware....I should learn how to get this - * information from it. - */ - bd = &bdinfo; - *bdp = bd; - bd->bi_baudrate = 9600; - bd->bi_memsize = 32 * 1024 * 1024; - - /* Set all of the clocks. We have to know the speed of the - * external clock. The development board had 66 MHz. - */ - bd->bi_busfreq = 66666666; - clk_8260(bd); - - /* I don't know how to compute this yet. - */ - bd->bi_intfreq = 200000000; - - - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - bd->bi_enetaddr[i] = *cp++; - } -} -#endif /* WILLOW */ - -#if defined(CONFIG_XILINX_ML300) || defined(CONFIG_XILINX_ML403) -void -embed_config(bd_t ** bdp) -{ - static const unsigned long line_size = 32; - static const unsigned long congruence_classes = 256; - unsigned long addr; - unsigned long dccr; - uint8_t* cp; - bd_t *bd; - int i; - - /* - * Invalidate the data cache if the data cache is turned off. - * - The 405 core does not invalidate the data cache on power-up - * or reset but does turn off the data cache. We cannot assume - * that the cache contents are valid. - * - If the data cache is turned on this must have been done by - * a bootloader and we assume that the cache contents are - * valid. - */ - __asm__("mfdccr %0": "=r" (dccr)); - if (dccr == 0) { - for (addr = 0; - addr < (congruence_classes * line_size); - addr += line_size) { - __asm__("dccci 0,%0": :"b"(addr)); - } - } - - bd = &bdinfo; - *bdp = bd; - bd->bi_memsize = XPAR_DDR_0_SIZE; - bd->bi_intfreq = XPAR_CORE_CLOCK_FREQ_HZ; - bd->bi_busfreq = XPAR_PLB_CLOCK_FREQ_HZ; - bd->bi_pci_busfreq = XPAR_PCI_0_CLOCK_FREQ_HZ; - - /* Copy the default ethernet address */ - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) - bd->bi_enetaddr[i] = *cp++; - - timebase_period_ns = 1000000000 / bd->bi_tbfreq; - /* see bi_tbfreq definition in arch/ppc/platforms/4xx/xilinx_ml300.h */ -} -#endif /* CONFIG_XILINX_ML300 || CONFIG_XILINX_ML403 */ - -#ifdef CONFIG_IBM_OPENBIOS -/* This could possibly work for all treeboot roms. -*/ -#if defined(CONFIG_BUBINGA) -#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */ -#else -#define BOARD_INFO_VECTOR 0xFFFE0B50 -#endif - -void -embed_config(bd_t **bdp) -{ - u_char *cp; - int i; - bd_t *bd, *treeboot_bd; - bd_t *(*get_board_info)(void) = - (bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR); -#if !defined(CONFIG_STB03xxx) - - /* shut down the Ethernet controller that the boot rom - * sometimes leaves running. - */ - mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); /* 1st reset MAL */ - while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */ - out_be32((volatile u32*)EMAC0_BASE,0x20000000); /* then reset EMAC */ -#endif - - bd = &bdinfo; - *bdp = bd; - if ((treeboot_bd = get_board_info()) != NULL) { - memcpy(bd, treeboot_bd, sizeof(bd_t)); - } - else { - /* Hmmm...better try to stuff some defaults. - */ - bd->bi_memsize = 16 * 1024 * 1024; - cp = (u_char *)def_enet_addr; - for (i=0; i<6; i++) { - /* I should probably put different ones here, - * hopefully only one is used. - */ - bd->BD_EMAC_ADDR(0,i) = *cp; - -#ifdef CONFIG_PCI - bd->bi_pci_enetaddr[i] = *cp++; -#endif - } - bd->bi_tbfreq = 200 * 1000 * 1000; - bd->bi_intfreq = 200000000; - bd->bi_busfreq = 100000000; -#ifdef CONFIG_PCI - bd->bi_pci_busfreq = 66666666; -#endif - } - /* Yeah, this look weird, but on Redwood 4 they are - * different object in the structure. Sincr Redwwood 5 - * and Redwood 6 use OpenBIOS, it requires a special value. - */ -#if defined(CONFIG_REDWOOD_5) || defined (CONFIG_REDWOOD_6) - bd->bi_tbfreq = 27 * 1000 * 1000; -#endif - timebase_period_ns = 1000000000 / bd->bi_tbfreq; -} -#endif /* CONFIG_IBM_OPENBIOS */ - -#ifdef CONFIG_EP405 -#include <linux/serial_reg.h> - -void -embed_config(bd_t **bdp) -{ - u32 chcr0; - u_char *cp; - bd_t *bd; - - /* Different versions of the PlanetCore firmware vary in how - they set up the serial port - in particular whether they - use the internal or external serial clock for UART0. Make - sure the UART is in a known state. */ - /* FIXME: We should use the board's 11.0592MHz external serial - clock - it will be more accurate for serial rates. For - now, however the baud rates in ep405.h are for the internal - clock. */ - chcr0 = mfdcr(DCRN_CHCR0); - if ( (chcr0 & 0x1fff) != 0x103e ) { - mtdcr(DCRN_CHCR0, (chcr0 & 0xffffe000) | 0x103e); - /* The following tricks serial_init() into resetting the baud rate */ - writeb(0, UART0_IO_BASE + UART_LCR); - } - - /* We haven't seen actual problems with the EP405 leaving the - * EMAC running (as we have on Walnut). But the registers - * suggest it may not be left completely quiescent. Reset it - * just to be sure. */ - mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); /* 1st reset MAL */ - while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */ - out_be32((unsigned *)EMAC0_BASE,0x20000000); /* then reset EMAC */ - - bd = &bdinfo; - *bdp = bd; -#if 1 - cp = (u_char *)0xF0000EE0; - for (;;) { - if (*cp == 'E') { - cp++; - if (*cp == 'A') { - cp += 2; - rpx_eth(bd, cp); - } - } - - if (*cp == 'D') { - cp++; - if (*cp == '1') { - cp += 2; - rpx_memsize(bd, cp); - } - } - - if (*cp == 'N') { - cp++; - if (*cp == 'V') { - cp += 2; - rpx_nvramsize(bd, cp); - } - } - while ((*cp != '\n') && (*cp != 0xff)) - cp++; - - cp++; - if ((*cp == 0) || (*cp == 0xff)) - break; - } - bd->bi_intfreq = 200000000; - bd->bi_busfreq = 100000000; - bd->bi_pci_busfreq= 33000000 ; -#else - - bd->bi_memsize = 64000000; - bd->bi_intfreq = 200000000; - bd->bi_busfreq = 100000000; - bd->bi_pci_busfreq= 33000000 ; -#endif -} -#endif diff --git a/arch/ppc/boot/simple/head.S b/arch/ppc/boot/simple/head.S deleted file mode 100644 index 1b4d7b1d4ec..00000000000 --- a/arch/ppc/boot/simple/head.S +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Initial board bringup code for many different boards. - * - * Author: Tom Rini - * trini@mvista.com - * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others). - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <asm/reg.h> -#include <asm/cache.h> -#include <asm/ppc_asm.h> - - .text - -/* - * Begin at some arbitrary location in RAM or Flash - * Initialize core registers - * Configure memory controller (Not executing from RAM) - * Move the boot code to the link address (8M) - * Setup C stack - * Initialize UART - * Decompress the kernel to 0x0 - * Jump to the kernel entry - * - */ - - .globl start -start: - bl start_ -#ifdef CONFIG_IBM_OPENBIOS - /* The IBM "Tree" bootrom knows that the address of the bootrom - * read only structure is 4 bytes after _start. - */ - .long 0x62726f6d # structure ID - "brom" - .long 0x5f726f00 # - "_ro\0" - .long 1 # structure version - .long bootrom_cmdline # address of *bootrom_cmdline -#endif - -start_: -#ifdef CONFIG_FORCE - /* We have some really bad firmware. We must disable the L1 - * icache/dcache now or the board won't boot. - */ - li r4,0x0000 - isync - mtspr SPRN_HID0,r4 - sync - isync -#endif - -#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP) - mr r29,r3 /* On the MBX860, r3 is the board info pointer. - * On the RPXSUPER, r3 points to the NVRAM - * configuration keys. - * On PReP, r3 is the pointer to the residual data. - */ -#endif - -#if defined(CONFIG_XILINX_VIRTEX_4_FX) - /* PPC errata 213: only for Virtex-4 FX */ - mfccr0 0 - oris 0,0,0x50000000@h - mtccr0 0 -#endif - - mflr r3 /* Save our actual starting address. */ - - /* The following functions we call must not modify r3 or r4..... - */ -#ifdef CONFIG_6xx - /* On PReP we must look at the OpenFirmware pointer and sanity - * test it. On other platforms, we disable the MMU right now - * and other bits. - */ -#ifdef CONFIG_PPC_PREP -/* - * Save the OF pointer to r25, but only if the entry point is in a sane - * location; if not we store 0. If there is no entry point, or it is - * invalid, we establish the default MSR value immediately. Otherwise, - * we defer doing that, to allow OF functions to be called, until we - * begin uncompressing the kernel. - */ - lis r8,0x0fff /* r8 = 0x0fffffff */ - ori r8,r8,0xffff - - subc r8,r8,r5 /* r8 = (r5 <= r8) ? ~0 : 0 */ - subfe r8,r8,r8 - nand r8,r8,r8 - - and. r5,r5,r8 /* r5 will be cleared if (r5 > r8) */ - bne+ haveOF - - li r8,MSR_IP|MSR_FP /* Not OF: set MSR immediately */ - mtmsr r8 - isync -haveOF: - mr r25,r5 -#else - bl disable_6xx_mmu -#endif - bl disable_6xx_l1cache - - CLEAR_CACHES -#endif - -#ifdef CONFIG_8xx - mfmsr r8 /* Turn off interrupts */ - li r9,0 - ori r9,r9,MSR_EE - andc r8,r8,r9 - mtmsr r8 - - /* We do this because some boot roms don't initialize the - * processor correctly. Don't do this if you want to debug - * using a BDM device. - */ - li r4,0 /* Zero DER to prevent FRZ */ - mtspr SPRN_DER,r4 -#endif - -#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP) - mr r4,r29 /* put the board info pointer where the relocate - * routine will find it - */ -#endif - - /* Get the load address. - */ - subi r3, r3, 4 /* Get the actual IP, not NIP */ - b relocate - diff --git a/arch/ppc/boot/simple/iic.c b/arch/ppc/boot/simple/iic.c deleted file mode 100644 index 5e91489426b..00000000000 --- a/arch/ppc/boot/simple/iic.c +++ /dev/null @@ -1,214 +0,0 @@ -/* Minimal support functions to read configuration from IIC EEPROMS - * on MPC8xx boards. Originally written for RPGC RPX-Lite. - * Dan Malek (dmalek@jlc.net). - */ -#include <linux/types.h> -#include <asm/uaccess.h> -#include <asm/mpc8xx.h> -#include <asm/cpm1.h> - - -/* IIC functions. - * These are just the basic master read/write operations so we can - * examine serial EEPROM. - */ -void iic_read(uint devaddr, u_char *buf, uint offset, uint count); - -static int iic_init_done; - -static void -iic_init(void) -{ - volatile iic_t *iip; - volatile i2c8xx_t *i2c; - volatile cpm8xx_t *cp; - volatile immap_t *immap; - uint dpaddr; - - immap = (immap_t *)IMAP_ADDR; - cp = (cpm8xx_t *)&(immap->im_cpm); - - /* Reset the CPM. This is necessary on the 860 processors - * that may have started the SCC1 ethernet without relocating - * the IIC. - * This also stops the Ethernet in case we were loaded by a - * BOOTP rom monitor. - */ - cp->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG); - - /* Wait for it. - */ - while (cp->cp_cpcr & (CPM_CR_RST | CPM_CR_FLG)); - - /* Remove any microcode patches. We will install our own - * later. - */ - cp->cp_cpmcr1 = 0; - cp->cp_cpmcr2 = 0; - cp->cp_cpmcr3 = 0; - cp->cp_cpmcr4 = 0; - cp->cp_rccr = 0; - - iip = (iic_t *)&cp->cp_dparam[PROFF_IIC]; - i2c = (i2c8xx_t *)&(immap->im_i2c); - - /* Initialize Port B IIC pins. - */ - cp->cp_pbpar |= 0x00000030; - cp->cp_pbdir |= 0x00000030; - cp->cp_pbodr |= 0x00000030; - - /* Initialize the parameter ram. - */ - - /* Allocate space for a two transmit and one receive buffer - * descriptor in the DP ram. - * For now, this address seems OK, but it may have to - * change with newer versions of the firmware. - */ - dpaddr = 0x0840; - - /* Set up the IIC parameters in the parameter ram. - */ - iip->iic_tbase = dpaddr; - iip->iic_rbase = dpaddr + (2 * sizeof(cbd_t)); - - iip->iic_tfcr = SMC_EB; - iip->iic_rfcr = SMC_EB; - - /* This should really be done by the reader/writer. - */ - iip->iic_mrblr = 128; - - /* Initialize Tx/Rx parameters. - */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - - /* Select an arbitrary address. Just make sure it is unique. - */ - i2c->i2c_i2add = 0x34; - - /* Make clock run maximum slow. - */ - i2c->i2c_i2brg = 7; - - /* Disable interrupts. - */ - i2c->i2c_i2cmr = 0; - i2c->i2c_i2cer = 0xff; - - /* Enable SDMA. - */ - immap->im_siu_conf.sc_sdcr = 1; - - iic_init_done = 1; -} - -/* Read from IIC. - * Caller provides device address, memory buffer, and byte count. - */ -static u_char iitemp[32]; - -void -iic_read(uint devaddr, u_char *buf, uint offset, uint count) -{ - volatile iic_t *iip; - volatile i2c8xx_t *i2c; - volatile cbd_t *tbdf, *rbdf; - volatile cpm8xx_t *cp; - volatile immap_t *immap; - u_char *tb; - uint temp; - - /* If the interface has not been initialized, do that now. - */ - if (!iic_init_done) - iic_init(); - - immap = (immap_t *)IMAP_ADDR; - cp = (cpm8xx_t *)&(immap->im_cpm); - - iip = (iic_t *)&cp->cp_dparam[PROFF_IIC]; - i2c = (i2c8xx_t *)&(immap->im_i2c); - - tbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_tbase]; - rbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_rbase]; - - /* Send a "dummy write" operation. This is a write request with - * only the offset sent, followed by another start condition. - * This will ensure we start reading from the first location - * of the EEPROM. - */ - tb = iitemp; - tb = (u_char *)(((uint)tb + 15) & ~15); - tbdf->cbd_bufaddr = (int)tb; - *tb = devaddr & 0xfe; /* Device address */ - *(tb+1) = offset; /* Offset */ - tbdf->cbd_datlen = 2; /* Length */ - tbdf->cbd_sc = - BD_SC_READY | BD_SC_LAST | BD_SC_WRAP | BD_IIC_START; - - i2c->i2c_i2mod = 1; /* Enable */ - i2c->i2c_i2cer = 0xff; - i2c->i2c_i2com = 0x81; /* Start master */ - - /* Wait for IIC transfer. - */ -#if 0 - while ((i2c->i2c_i2cer & 3) == 0); - - if (tbdf->cbd_sc & BD_SC_READY) - printf("IIC ra complete but tbuf ready\n"); -#else - temp = 10000000; - while ((tbdf->cbd_sc & BD_SC_READY) && (temp != 0)) - temp--; -#if 0 - /* We can't do this...there is no serial port yet! - */ - if (temp == 0) { - printf("Timeout reading EEPROM\n"); - return; - } -#endif -#endif - - /* Chip errata, clear enable. - */ - i2c->i2c_i2mod = 0; - - /* To read, we need an empty buffer of the proper length. - * All that is used is the first byte for address, the remainder - * is just used for timing (and doesn't really have to exist). - */ - tbdf->cbd_bufaddr = (int)tb; - *tb = devaddr | 1; /* Device address */ - rbdf->cbd_bufaddr = (uint)buf; /* Desination buffer */ - tbdf->cbd_datlen = rbdf->cbd_datlen = count + 1; /* Length */ - tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP | BD_IIC_START; - rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP; - - /* Chip bug, set enable here. - */ - i2c->i2c_i2mod = 1; /* Enable */ - i2c->i2c_i2cer = 0xff; - i2c->i2c_i2com = 0x81; /* Start master */ - - /* Wait for IIC transfer. - */ -#if 0 - while ((i2c->i2c_i2cer & 1) == 0); - - if (rbdf->cbd_sc & BD_SC_EMPTY) - printf("IIC read complete but rbuf empty\n"); -#else - temp = 10000000; - while ((tbdf->cbd_sc & BD_SC_READY) && (temp != 0)) - temp--; -#endif - - /* Chip errata, clear enable. - */ - i2c->i2c_i2mod = 0; -} diff --git a/arch/ppc/boot/simple/m8260_tty.c b/arch/ppc/boot/simple/m8260_tty.c deleted file mode 100644 index d770947e9b8..00000000000 --- a/arch/ppc/boot/simple/m8260_tty.c +++ /dev/null @@ -1,325 +0,0 @@ -/* Minimal serial functions needed to send messages out the serial - * port on SMC1. - */ -#include <linux/types.h> -#include <asm/mpc8260.h> -#include <asm/cpm2.h> -#include <asm/immap_cpm2.h> - -uint no_print; -extern char *params[]; -extern int nparams; -static u_char cons_hold[128], *sgptr; -static int cons_hold_cnt; - -/* If defined, enables serial console. The value (1 through 4) - * should designate which SCC is used, but this isn't complete. Only - * SCC1 is known to work at this time. - * We're only linked if SERIAL_CPM_CONSOLE=y, so we only need to test - * SERIAL_CPM_SCC1. - */ -#ifdef CONFIG_SERIAL_CPM_SCC1 -#define SCC_CONSOLE 1 -#endif - -unsigned long -serial_init(int ignored, bd_t *bd) -{ -#ifdef SCC_CONSOLE - volatile scc_t *sccp; - volatile scc_uart_t *sup; -#else - volatile smc_t *sp; - volatile smc_uart_t *up; -#endif - volatile cbd_t *tbdf, *rbdf; - volatile cpm2_map_t *ip; - volatile iop_cpm2_t *io; - volatile cpm_cpm2_t *cp; - uint dpaddr, memaddr; - - ip = (cpm2_map_t *)CPM_MAP_ADDR; - cp = &ip->im_cpm; - io = &ip->im_ioport; - - /* Perform a reset. - */ - cp->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG); - - /* Wait for it. - */ - while (cp->cp_cpcr & CPM_CR_FLG); - -#ifdef CONFIG_ADS8260 - /* Enable the RS-232 transceivers. - */ - *(volatile uint *)(BCSR_ADDR + 4) &= - ~(BCSR1_RS232_EN1 | BCSR1_RS232_EN2); -#endif - -#ifdef SCC_CONSOLE - sccp = (scc_t *)&(ip->im_scc[SCC_CONSOLE-1]); - sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)]; - sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); - sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - /* Use Port D for SCC1 instead of other functions. - */ - io->iop_ppard |= 0x00000003; - io->iop_psord &= ~0x00000001; /* Rx */ - io->iop_psord |= 0x00000002; /* Tx */ - io->iop_pdird &= ~0x00000001; /* Rx */ - io->iop_pdird |= 0x00000002; /* Tx */ - -#else - sp = (smc_t*)&(ip->im_smc[0]); - *(ushort *)(&ip->im_dprambase[PROFF_SMC1_BASE]) = PROFF_SMC1; - up = (smc_uart_t *)&ip->im_dprambase[PROFF_SMC1]; - - /* Disable transmitter/receiver. - */ - sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - - /* Use Port D for SMC1 instead of other functions. - */ - io->iop_ppard |= 0x00c00000; - io->iop_pdird |= 0x00400000; - io->iop_pdird &= ~0x00800000; - io->iop_psord &= ~0x00c00000; -#endif - - /* Allocate space for two buffer descriptors in the DP ram. - * For now, this address seems OK, but it may have to - * change with newer versions of the firmware. - */ - dpaddr = 0x0800; - - /* Grab a few bytes from the top of memory. - */ - memaddr = (bd->bi_memsize - 256) & ~15; - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - rbdf = (cbd_t *)&ip->im_dprambase[dpaddr]; - rbdf->cbd_bufaddr = memaddr; - rbdf->cbd_sc = 0; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = memaddr+128; - tbdf->cbd_sc = 0; - - /* Set up the uart parameters in the parameter ram. - */ -#ifdef SCC_CONSOLE - sup->scc_genscc.scc_rbase = dpaddr; - sup->scc_genscc.scc_tbase = dpaddr + sizeof(cbd_t); - - /* Set up the uart parameters in the - * parameter ram. - */ - sup->scc_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB; - sup->scc_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB; - - sup->scc_genscc.scc_mrblr = 128; - sup->scc_maxidl = 8; - sup->scc_brkcr = 1; - sup->scc_parec = 0; - sup->scc_frmec = 0; - sup->scc_nosec = 0; - sup->scc_brkec = 0; - sup->scc_uaddr1 = 0; - sup->scc_uaddr2 = 0; - sup->scc_toseq = 0; - sup->scc_char1 = 0x8000; - sup->scc_char2 = 0x8000; - sup->scc_char3 = 0x8000; - sup->scc_char4 = 0x8000; - sup->scc_char5 = 0x8000; - sup->scc_char6 = 0x8000; - sup->scc_char7 = 0x8000; - sup->scc_char8 = 0x8000; - sup->scc_rccm = 0xc0ff; - - /* Send the CPM an initialize command. - */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0, - CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sccp->scc_gsmrh = 0; - sccp->scc_gsmrl = - (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - /* Disable all interrupts and clear all pending - * events. - */ - sccp->scc_sccm = 0; - sccp->scc_scce = 0xffff; - sccp->scc_dsr = 0x7e7e; - sccp->scc_psmr = 0x3000; - - /* Wire BRG1 to SCC1. The console driver will take care of - * others. - */ - ip->im_cpmux.cmx_scr = 0; -#else - up->smc_rbase = dpaddr; - up->smc_tbase = dpaddr+sizeof(cbd_t); - up->smc_rfcr = CPMFCR_EB; - up->smc_tfcr = CPMFCR_EB; - up->smc_brklen = 0; - up->smc_brkec = 0; - up->smc_brkcr = 0; - up->smc_mrblr = 128; - up->smc_maxidl = 8; - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* Mask all interrupts and remove anything pending. - */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - - /* Set up the baud rate generator. - */ - ip->im_cpmux.cmx_smr = 0; -#endif - - /* The baud rate divisor needs to be coordinated with clk_8260(). - */ - ip->im_brgc1 = - (((bd->bi_brgfreq/16) / bd->bi_baudrate) << 1) | - CPM_BRG_EN; - - /* Make the first buffer the only buffer. - */ - tbdf->cbd_sc |= BD_SC_WRAP; - rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; - - /* Initialize Tx/Rx parameters. - */ -#ifdef SCC_CONSOLE - sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#else - cp->cp_cpcr = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - - /* Enable transmitter/receiver. - */ - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; -#endif - - /* This is ignored. - */ - return 0; -} - -int -serial_readbuf(u_char *cbuf) -{ - volatile cbd_t *rbdf; - volatile char *buf; -#ifdef SCC_CONSOLE - volatile scc_uart_t *sup; -#else - volatile smc_uart_t *up; -#endif - volatile cpm2_map_t *ip; - int i, nc; - - ip = (cpm2_map_t *)CPM_MAP_ADDR; - -#ifdef SCC_CONSOLE - sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)]; - rbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_rbase]; -#else - up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]); - rbdf = (cbd_t *)&ip->im_dprambase[up->smc_rbase]; -#endif - - /* Wait for character to show up. - */ - buf = (char *)rbdf->cbd_bufaddr; - while (rbdf->cbd_sc & BD_SC_EMPTY); - nc = rbdf->cbd_datlen; - for (i=0; i<nc; i++) - *cbuf++ = *buf++; - rbdf->cbd_sc |= BD_SC_EMPTY; - - return(nc); -} - -void -serial_putc(void *ignored, const char c) -{ - volatile cbd_t *tbdf; - volatile char *buf; -#ifdef SCC_CONSOLE - volatile scc_uart_t *sup; -#else - volatile smc_uart_t *up; -#endif - volatile cpm2_map_t *ip; - - ip = (cpm2_map_t *)CPM_MAP_ADDR; -#ifdef SCC_CONSOLE - sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)]; - tbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_tbase]; -#else - up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]); - tbdf = (cbd_t *)&ip->im_dprambase[up->smc_tbase]; -#endif - - /* Wait for last character to go. - */ - buf = (char *)tbdf->cbd_bufaddr; - while (tbdf->cbd_sc & BD_SC_READY); - - *buf = c; - tbdf->cbd_datlen = 1; - tbdf->cbd_sc |= BD_SC_READY; -} - -char -serial_getc(void *ignored) -{ - char c; - - if (cons_hold_cnt <= 0) { - cons_hold_cnt = serial_readbuf(cons_hold); - sgptr = cons_hold; - } - c = *sgptr++; - cons_hold_cnt--; - - return(c); -} - -int -serial_tstc(void *ignored) -{ - volatile cbd_t *rbdf; -#ifdef SCC_CONSOLE - volatile scc_uart_t *sup; -#else - volatile smc_uart_t *up; -#endif - volatile cpm2_map_t *ip; - - ip = (cpm2_map_t *)CPM_MAP_ADDR; -#ifdef SCC_CONSOLE - sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)]; - rbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_rbase]; -#else - up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]); - rbdf = (cbd_t *)&ip->im_dprambase[up->smc_rbase]; -#endif - - return(!(rbdf->cbd_sc & BD_SC_EMPTY)); -} diff --git a/arch/ppc/boot/simple/m8xx_tty.c b/arch/ppc/boot/simple/m8xx_tty.c deleted file mode 100644 index f28924e6aeb..00000000000 --- a/arch/ppc/boot/simple/m8xx_tty.c +++ /dev/null @@ -1,289 +0,0 @@ -/* Minimal serial functions needed to send messages out the serial - * port on the MBX console. - * - * The MBX uses SMC1 for the serial port. We reset the port and use - * only the first BD that EPPC-Bug set up as a character FIFO. - * - * Later versions (at least 1.4, maybe earlier) of the MBX EPPC-Bug - * use COM1 instead of SMC1 as the console port. This kinda sucks - * for the rest of the kernel, so here we force the use of SMC1 again. - */ -#include <linux/types.h> -#include <asm/uaccess.h> -#include <asm/mpc8xx.h> -#include <asm/cpm1.h> - -#ifdef CONFIG_MBX -#define MBX_CSR1 ((volatile u_char *)0xfa100000) -#define CSR1_COMEN (u_char)0x02 -#endif - -#ifdef TQM_SMC2_CONSOLE -#define PROFF_CONS PROFF_SMC2 -#define CPM_CR_CH_CONS CPM_CR_CH_SMC2 -#define SMC_INDEX 1 -static volatile iop8xx_t *iopp = (iop8xx_t *)&(((immap_t *)IMAP_ADDR)->im_ioport); -#else -#define PROFF_CONS PROFF_SMC1 -#define CPM_CR_CH_CONS CPM_CR_CH_SMC1 -#define SMC_INDEX 0 -#endif - -static cpm8xx_t *cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); - -unsigned long -serial_init(int ignored, bd_t *bd) -{ - volatile smc_t *sp; - volatile smc_uart_t *up; - volatile cbd_t *tbdf, *rbdf; - volatile cpm8xx_t *cp; - uint dpaddr, memaddr; -#ifndef CONFIG_MBX - uint ui; -#endif - - cp = cpmp; - sp = (smc_t*)&(cp->cp_smc[SMC_INDEX]); - up = (smc_uart_t *)&cp->cp_dparam[PROFF_CONS]; - - /* Disable transmitter/receiver. - */ - sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - -#ifdef CONFIG_FADS - /* Enable SMC1/2 transceivers. - */ - *((volatile uint *)BCSR1) &= ~(BCSR1_RS232EN_1|BCSR1_RS232EN_2); -#endif - -#ifndef CONFIG_MBX - { - /* Initialize SMCx and use it for the console port. - */ - - /* Enable SDMA. - */ - ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1; - -#ifdef TQM_SMC2_CONSOLE - /* Use Port A for SMC2 instead of other functions. - */ - iopp->iop_papar |= 0x00c0; - iopp->iop_padir &= ~0x00c0; - iopp->iop_paodr &= ~0x00c0; -#else - /* Use Port B for SMCs instead of other functions. - */ - cp->cp_pbpar |= 0x00000cc0; - cp->cp_pbdir &= ~0x00000cc0; - cp->cp_pbodr &= ~0x00000cc0; -#endif - - /* Allocate space for two buffer descriptors in the DP ram. - * For now, this address seems OK, but it may have to - * change with newer versions of the firmware. - */ - dpaddr = 0x0800; - - /* Grab a few bytes from the top of memory for SMC FIFOs. - */ - memaddr = (bd->bi_memsize - 32) & ~15; - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr]; - rbdf->cbd_bufaddr = memaddr; - rbdf->cbd_sc = 0; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = memaddr+4; - tbdf->cbd_sc = 0; - - /* Set up the uart parameters in the parameter ram. - */ - up->smc_rbase = dpaddr; - up->smc_tbase = dpaddr+sizeof(cbd_t); - up->smc_rfcr = SMC_EB; - up->smc_tfcr = SMC_EB; - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* Mask all interrupts and remove anything pending. - */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - - /* Set up the baud rate generator. - * See 8xx_io/commproc.c for details. - * This wires BRG1 to SMC1 and BRG2 to SMC2; - */ - cp->cp_simode = 0x10000000; - ui = bd->bi_intfreq / 16 / bd->bi_baudrate; -#ifdef TQM_SMC2_CONSOLE - cp->cp_brgc2 = -#else - cp->cp_brgc1 = -#endif - ((ui - 1) < 4096) - ? (((ui - 1) << 1) | CPM_BRG_EN) - : ((((ui / 16) - 1) << 1) | CPM_BRG_EN | CPM_BRG_DIV16); - -#else /* CONFIG_MBX */ - if (*MBX_CSR1 & CSR1_COMEN) { - /* COM1 is enabled. Initialize SMC1 and use it for - * the console port. - */ - - /* Enable SDMA. - */ - ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1; - - /* Use Port B for SMCs instead of other functions. - */ - cp->cp_pbpar |= 0x00000cc0; - cp->cp_pbdir &= ~0x00000cc0; - cp->cp_pbodr &= ~0x00000cc0; - - /* Allocate space for two buffer descriptors in the DP ram. - * For now, this address seems OK, but it may have to - * change with newer versions of the firmware. - */ - dpaddr = 0x0800; - - /* Grab a few bytes from the top of memory. EPPC-Bug isn't - * running any more, so we can do this. - */ - memaddr = (bd->bi_memsize - 32) & ~15; - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr]; - rbdf->cbd_bufaddr = memaddr; - rbdf->cbd_sc = 0; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = memaddr+4; - tbdf->cbd_sc = 0; - - /* Set up the uart parameters in the parameter ram. - */ - up->smc_rbase = dpaddr; - up->smc_tbase = dpaddr+sizeof(cbd_t); - up->smc_rfcr = SMC_EB; - up->smc_tfcr = SMC_EB; - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* Mask all interrupts and remove anything pending. - */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - - /* Set up the baud rate generator. - * See 8xx_io/commproc.c for details. - */ - cp->cp_simode = 0x10000000; - cp->cp_brgc1 = - (((bd->bi_intfreq/16) / 9600) << 1) | CPM_BRG_EN; - - /* Enable SMC1 for console output. - */ - *MBX_CSR1 &= ~CSR1_COMEN; - } - else { -#endif /* ndef CONFIG_MBX */ - /* SMCx is used as console port. - */ - tbdf = (cbd_t *)&cp->cp_dpmem[up->smc_tbase]; - rbdf = (cbd_t *)&cp->cp_dpmem[up->smc_rbase]; - - /* Issue a stop transmit, and wait for it. - */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS, - CPM_CR_STOP_TX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - } - - /* Make the first buffer the only buffer. - */ - tbdf->cbd_sc |= BD_SC_WRAP; - rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; - - /* Single character receive. - */ - up->smc_mrblr = 1; - up->smc_maxidl = 0; - - /* Initialize Tx/Rx parameters. - */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - - /* Enable transmitter/receiver. - */ - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; - - /* This is ignored. - */ - return 0; -} - -void -serial_putc(void *ignored, const char c) -{ - volatile cbd_t *tbdf; - volatile char *buf; - volatile smc_uart_t *up; - - up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS]; - tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase]; - - /* Wait for last character to go. - */ - buf = (char *)tbdf->cbd_bufaddr; - while (tbdf->cbd_sc & BD_SC_READY); - - *buf = c; - tbdf->cbd_datlen = 1; - tbdf->cbd_sc |= BD_SC_READY; -} - -char -serial_getc(void *ignored) -{ - volatile cbd_t *rbdf; - volatile char *buf; - volatile smc_uart_t *up; - char c; - - up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS]; - rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase]; - - /* Wait for character to show up. - */ - buf = (char *)rbdf->cbd_bufaddr; - while (rbdf->cbd_sc & BD_SC_EMPTY); - c = *buf; - rbdf->cbd_sc |= BD_SC_EMPTY; - - return(c); -} - -int -serial_tstc(void *ignored) -{ - volatile cbd_t *rbdf; - volatile smc_uart_t *up; - - up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS]; - rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase]; - - return(!(rbdf->cbd_sc & BD_SC_EMPTY)); -} diff --git a/arch/ppc/boot/simple/misc-chestnut.c b/arch/ppc/boot/simple/misc-chestnut.c deleted file mode 100644 index 14a4b56d4f8..00000000000 --- a/arch/ppc/boot/simple/misc-chestnut.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Setup for the IBM Chestnut (ibm-750fxgx_eval) - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <asm/io.h> -#include <asm/mv64x60_defs.h> -#include <platforms/chestnut.h> - -/* Not in the kernel so won't include kernel.h to get its 'max' definition */ -#define max(a,b) (((a) > (b)) ? (a) : (b)) - -void -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ -#ifdef CONFIG_SERIAL_8250_CONSOLE - /* - * Change device bus 2 window so that bootoader can do I/O thru - * 8250/16550 UART that's mapped in that window. - */ - out_le32(new_base + MV64x60_CPU2DEV_2_BASE, CHESTNUT_UART_BASE >> 16); - out_le32(new_base + MV64x60_CPU2DEV_2_SIZE, CHESTNUT_UART_SIZE >> 16); - __asm__ __volatile__("sync"); -#endif -} diff --git a/arch/ppc/boot/simple/misc-cpci690.c b/arch/ppc/boot/simple/misc-cpci690.c deleted file mode 100644 index 8a8614d11a3..00000000000 --- a/arch/ppc/boot/simple/misc-cpci690.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Add birec data for Force CPCI690 board. - * - * Author: Mark A. Greer <source@mvista.com> - * - * 2003 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <asm/io.h> -#include <platforms/cpci690.h> - -#define KB (1024UL) -#define MB (1024UL*KB) -#define GB (1024UL*MB) - -extern u32 mv64x60_console_baud; -extern u32 mv64x60_mpsc_clk_src; -extern u32 mv64x60_mpsc_clk_freq; - -u32 mag = 0xffff; - -unsigned long -get_mem_size(void) -{ - u32 size; - - switch (in_8(((void __iomem *)CPCI690_BR_BASE + CPCI690_BR_MEM_CTLR)) - & 0x07) { - case 0x01: - size = 256*MB; - break; - case 0x02: - size = 512*MB; - break; - case 0x03: - size = 768*MB; - break; - case 0x04: - size = 1*GB; - break; - case 0x05: - size = 1*GB + 512*MB; - break; - case 0x06: - size = 2*GB; - break; - default: - size = 0; - } - - return size; -} - -void -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ - mv64x60_console_baud = CPCI690_MPSC_BAUD; - mv64x60_mpsc_clk_src = CPCI690_MPSC_CLK_SRC; - mv64x60_mpsc_clk_freq = - (get_mem_size() >= (1*GB)) ? 100000000 : 133333333; -} diff --git a/arch/ppc/boot/simple/misc-embedded.c b/arch/ppc/boot/simple/misc-embedded.c deleted file mode 100644 index d5a00eb0e4e..00000000000 --- a/arch/ppc/boot/simple/misc-embedded.c +++ /dev/null @@ -1,276 +0,0 @@ -/* - * Originally adapted by Gary Thomas. Much additional work by - * Cort Dougan <cort@fsmlabs.com>. On top of that still more work by - * Dan Malek <dmalek@jlc.net>. - * - * Currently maintained by: Tom Rini <trini@kernel.crashing.org> - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <asm/bootinfo.h> -#include <asm/mmu.h> -#include <asm/page.h> -#include <asm/residual.h> -#if defined(CONFIG_4xx) -#include <asm/ibm4xx.h> -#elif defined(CONFIG_8xx) -#include <asm/mpc8xx.h> -#elif defined(CONFIG_8260) -#include <asm/mpc8260.h> -#endif - -#include "nonstdio.h" - -/* The linker tells us where the image is. */ -extern char __image_begin, __image_end; -extern char __ramdisk_begin, __ramdisk_end; -extern char _end[]; - -/* Because of the limited amount of memory on embedded, it presents - * loading problems. The biggest is that we load this boot program - * into a relatively low memory address, and the Linux kernel Bss often - * extends into this space when it get loaded. When the kernel starts - * and zeros the BSS space, it also writes over the information we - * save here and pass to the kernel (usually board info). - * On these boards, we grab some known memory holes to hold this information. - */ -char cmd_buf[256]; -char *cmd_line = cmd_buf; -char *avail_ram; -char *end_avail; -char *zimage_start; - -/* This is for 4xx treeboot. It provides a place for the bootrom - * give us a pointer to a rom environment command line. - */ -char *bootrom_cmdline = ""; - -/* This is the default cmdline that will be given to the user at boot time.. - * If none was specified at compile time, we'll give it one that should work. - * -- Tom */ -#ifdef CONFIG_CMDLINE_BOOL -char compiled_string[] = CONFIG_CMDLINE; -#endif -char ramroot_string[] = "root=/dev/ram"; -char netroot_string[] = "root=/dev/nfs rw ip=on"; - -/* Serial port to use. */ -unsigned long com_port; - -/* We need to make sure that this is before the images to ensure - * that it's in a mapped location. - Tom */ -bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot"))); -bd_t *hold_residual = &hold_resid_buf; - -extern unsigned long serial_init(int chan, bd_t *bp); -extern void serial_close(unsigned long com_port); -extern unsigned long start; -extern void flush_instruction_cache(void); -extern void gunzip(void *, int, unsigned char *, int *); -extern void embed_config(bd_t **bp); - -/* Weak function for boards which don't need to build the - * board info struct because they are using PPCBoot/U-Boot. - */ -void __attribute__ ((weak)) -embed_config(bd_t **bdp) -{ -} - -unsigned long -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, bd_t *bp) -{ - char *cp, ch; - int timer = 0, zimage_size; - unsigned long initrd_size; - - /* First, capture the embedded board information. Then - * initialize the serial console port. - */ - embed_config(&bp); -#if defined(CONFIG_SERIAL_CPM_CONSOLE) || \ - defined(CONFIG_SERIAL_8250_CONSOLE) || \ - defined(CONFIG_SERIAL_UARTLITE_CONSOLE) - com_port = serial_init(0, bp); -#endif - - /* Grab some space for the command line and board info. Since - * we no longer use the ELF header, but it was loaded, grab - * that space. - */ -#ifdef CONFIG_MBX - /* Because of the way the MBX loads the ELF image, we can't - * tell where we started. We read a magic variable from the NVRAM - * that gives us the intermediate buffer load address. - */ - load_addr = *(uint *)0xfa000020; - load_addr += 0x10000; /* Skip ELF header */ -#endif - /* copy board data */ - if (bp) - memcpy(hold_residual,bp,sizeof(bd_t)); - - /* Set end of memory available to us. It is always the highest - * memory address provided by the board information. - */ - end_avail = (char *)(bp->bi_memsize); - - puts("\nloaded at: "); puthex(load_addr); - puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); puts("\n"); - if ( (unsigned long)load_addr != (unsigned long)&start ) { - puts("relocated to: "); puthex((unsigned long)&start); - puts(" "); - puthex((unsigned long)((unsigned long)&start + (4*num_words))); - puts("\n"); - } - - if ( bp ) { - puts("board data at: "); puthex((unsigned long)bp); - puts(" "); - puthex((unsigned long)((unsigned long)bp + sizeof(bd_t))); - puts("\nrelocated to: "); - puthex((unsigned long)hold_residual); - puts(" "); - puthex((unsigned long)((unsigned long)hold_residual + sizeof(bd_t))); - puts("\n"); - } - - /* - * We link ourself to an arbitrary low address. When we run, we - * relocate ourself to that address. __image_being points to - * the part of the image where the zImage is. -- Tom - */ - zimage_start = (char *)(unsigned long)(&__image_begin); - zimage_size = (unsigned long)(&__image_end) - - (unsigned long)(&__image_begin); - - initrd_size = (unsigned long)(&__ramdisk_end) - - (unsigned long)(&__ramdisk_begin); - - /* - * The zImage and initrd will be between start and _end, so they've - * already been moved once. We're good to go now. -- Tom - */ - puts("zimage at: "); puthex((unsigned long)zimage_start); - puts(" "); puthex((unsigned long)(zimage_size+zimage_start)); - puts("\n"); - - if ( initrd_size ) { - puts("initrd at: "); - puthex((unsigned long)(&__ramdisk_begin)); - puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n"); - } - - /* - * setup avail_ram - this is the first part of ram usable - * by the uncompress code. Anything after this program in RAM - * is now fair game. -- Tom - */ - avail_ram = (char *)PAGE_ALIGN((unsigned long)_end); - - puts("avail ram: "); puthex((unsigned long)avail_ram); puts(" "); - puthex((unsigned long)end_avail); puts("\n"); - puts("\nLinux/PPC load: "); - cp = cmd_line; - /* This is where we try and pick the right command line for booting. - * If we were given one at compile time, use it. It Is Right. - * If we weren't, see if we have a ramdisk. If so, thats root. - * When in doubt, give them the netroot (root=/dev/nfs rw) -- Tom - */ -#ifdef CONFIG_CMDLINE_BOOL - memcpy (cmd_line, compiled_string, sizeof(compiled_string)); -#else - if ( initrd_size ) - memcpy (cmd_line, ramroot_string, sizeof(ramroot_string)); - else - memcpy (cmd_line, netroot_string, sizeof(netroot_string)); -#endif - while ( *cp ) - putc(*cp++); - while (timer++ < 5*1000) { - if (tstc()) { - while ((ch = getc()) != '\n' && ch != '\r') { - if (ch == '\b' || ch == '\177') { - if (cp != cmd_line) { - cp--; - puts("\b \b"); - } - } else if (ch == '\030' /* ^x */ - || ch == '\025') { /* ^u */ - while (cp != cmd_line) { - cp--; - puts("\b \b"); - } - } else { - *cp++ = ch; - putc(ch); - } - } - break; /* Exit 'timer' loop */ - } - udelay(1000); /* 1 msec */ - } - *cp = 0; - puts("\nUncompressing Linux..."); - - gunzip(0, 0x400000, zimage_start, &zimage_size); - flush_instruction_cache(); - puts("done.\n"); - { - struct bi_record *rec; - unsigned long initrd_loc = 0; - unsigned long rec_loc = _ALIGN((unsigned long)(zimage_size) + - (1 << 20) - 1, (1 << 20)); - rec = (struct bi_record *)rec_loc; - - /* We need to make sure that the initrd and bi_recs do not - * overlap. */ - if ( initrd_size ) { - initrd_loc = (unsigned long)(&__ramdisk_begin); - /* If the bi_recs are in the middle of the current - * initrd, move the initrd to the next MB - * boundary. */ - if ((rec_loc > initrd_loc) && - ((initrd_loc + initrd_size) - > rec_loc)) { - initrd_loc = _ALIGN((unsigned long)(zimage_size) - + (2 << 20) - 1, (2 << 20)); - memmove((void *)initrd_loc, &__ramdisk_begin, - initrd_size); - puts("initrd moved: "); puthex(initrd_loc); - puts(" "); puthex(initrd_loc + initrd_size); - puts("\n"); - } - } - - rec->tag = BI_FIRST; - rec->size = sizeof(struct bi_record); - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - rec->tag = BI_CMD_LINE; - memcpy( (char *)rec->data, cmd_line, strlen(cmd_line)+1); - rec->size = sizeof(struct bi_record) + strlen(cmd_line) + 1; - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - if ( initrd_size ) { - rec->tag = BI_INITRD; - rec->data[0] = initrd_loc; - rec->data[1] = initrd_size; - rec->size = sizeof(struct bi_record) + 2 * - sizeof(unsigned long); - rec = (struct bi_record *)((unsigned long)rec + - rec->size); - } - - rec->tag = BI_LAST; - rec->size = sizeof(struct bi_record); - rec = (struct bi_record *)((unsigned long)rec + rec->size); - } - puts("Now booting the kernel\n"); -#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) - serial_close(com_port); -#endif - - return (unsigned long)hold_residual; -} diff --git a/arch/ppc/boot/simple/misc-ev64260.c b/arch/ppc/boot/simple/misc-ev64260.c deleted file mode 100644 index 0b3978632ac..00000000000 --- a/arch/ppc/boot/simple/misc-ev64260.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Host bridge init code for the Marvell/Galileo EV-64260-BP evaluation board - * with a GT64260 onboard. - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2001 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <asm/reg.h> -#include <asm/io.h> -#include <asm/mv64x60_defs.h> -#include <platforms/ev64260.h> - -#ifdef CONFIG_SERIAL_MPSC_CONSOLE -extern u32 mv64x60_console_baud; -extern u32 mv64x60_mpsc_clk_src; -extern u32 mv64x60_mpsc_clk_freq; -#endif - -void -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ - u32 p, v; - - /* DINK doesn't enable 745x timebase, so enable here (Adrian Cox) */ - p = mfspr(SPRN_PVR); - p >>= 16; - - /* Reasonable SWAG at a 745x PVR value */ - if (((p & 0xfff0) == 0x8000) && (p != 0x800c)) { - v = mfspr(SPRN_HID0); - v |= HID0_TBEN; - mtspr(SPRN_HID0, v); - } - -#ifdef CONFIG_SERIAL_8250_CONSOLE - /* - * Change device bus 2 window so that bootoader can do I/O thru - * 8250/16550 UART that's mapped in that window. - */ - out_le32(new_base + MV64x60_CPU2DEV_2_BASE, EV64260_UART_BASE >> 20); - out_le32(new_base + MV64x60_CPU2DEV_2_SIZE, EV64260_UART_END >> 20); - __asm__ __volatile__("sync"); -#elif defined(CONFIG_SERIAL_MPSC_CONSOLE) - mv64x60_console_baud = EV64260_DEFAULT_BAUD; - mv64x60_mpsc_clk_src = EV64260_MPSC_CLK_SRC; - mv64x60_mpsc_clk_freq = EV64260_MPSC_CLK_FREQ; -#endif -} diff --git a/arch/ppc/boot/simple/misc-ev64360.c b/arch/ppc/boot/simple/misc-ev64360.c deleted file mode 100644 index 96eaebb78df..00000000000 --- a/arch/ppc/boot/simple/misc-ev64360.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2005 Lee Nicks <allinux@gmail.com> - * - * Based on arch/ppc/boot/simple/misc-katana.c from: - * Mark A. Greer <source@mvista.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/types.h> -#include <asm/io.h> -#include <asm/mv64x60_defs.h> -#include <platforms/ev64360.h> - -extern u32 mv64x60_console_baud; -extern u32 mv64x60_mpsc_clk_src; -extern u32 mv64x60_mpsc_clk_freq; - -/* Not in the kernel so won't include kernel.h to get its 'min' definition */ -#ifndef min -#define min(a,b) (((a) < (b)) ? (a) : (b)) -#endif - -void -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ - mv64x60_console_baud = EV64360_DEFAULT_BAUD; - mv64x60_mpsc_clk_src = EV64360_MPSC_CLK_SRC; - mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ; -} diff --git a/arch/ppc/boot/simple/misc-katana.c b/arch/ppc/boot/simple/misc-katana.c deleted file mode 100644 index 79a1bbcbc6c..00000000000 --- a/arch/ppc/boot/simple/misc-katana.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Set up MPSC values to bootwrapper can prompt user. - * - * Author: Mark A. Greer <source@mvista.com> - * - * 2004 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <asm/io.h> -#include <asm/mv64x60_defs.h> -#include <platforms/katana.h> - -extern u32 mv64x60_console_baud; -extern u32 mv64x60_mpsc_clk_src; -extern u32 mv64x60_mpsc_clk_freq; - -/* Not in the kernel so won't include kernel.h to get its 'min' definition */ -#ifndef min -#define min(a,b) (((a) < (b)) ? (a) : (b)) -#endif - -unsigned long mv64360_get_mem_size(void); - -void -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ - mv64x60_console_baud = KATANA_DEFAULT_BAUD; - mv64x60_mpsc_clk_src = KATANA_MPSC_CLK_SRC; - mv64x60_mpsc_clk_freq = - min(katana_bus_freq((void __iomem *)KATANA_CPLD_BASE), - MV64x60_TCLK_FREQ_MAX); -} - -unsigned long -get_mem_size(void) -{ - return mv64360_get_mem_size(); -} diff --git a/arch/ppc/boot/simple/misc-mv64x60.c b/arch/ppc/boot/simple/misc-mv64x60.c deleted file mode 100644 index 28b3108083e..00000000000 --- a/arch/ppc/boot/simple/misc-mv64x60.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Relocate bridge's register base and call board specific routine. - * - * Author: Mark A. Greer <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <asm/io.h> -#include <asm/mv64x60_defs.h> - -extern struct bi_record *decompress_kernel(unsigned long load_addr, - int num_words, unsigned long cksum); - - -u32 size_reg[MV64x60_CPU2MEM_WINDOWS] = { - MV64x60_CPU2MEM_0_SIZE, MV64x60_CPU2MEM_1_SIZE, - MV64x60_CPU2MEM_2_SIZE, MV64x60_CPU2MEM_3_SIZE -}; - -/* Read mem ctlr to get the amount of mem in system */ -unsigned long -mv64360_get_mem_size(void) -{ - u32 enables, i, v; - u32 mem = 0; - - enables = in_le32((void __iomem *)CONFIG_MV64X60_NEW_BASE + - MV64360_CPU_BAR_ENABLE) & 0xf; - - for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) - if (!(enables & (1<<i))) { - v = in_le32((void __iomem *)CONFIG_MV64X60_NEW_BASE - + size_reg[i]) & 0xffff; - v = (v + 1) << 16; - mem += v; - } - - return mem; -} - -void -mv64x60_move_base(void __iomem *old_base, void __iomem *new_base) -{ - u32 bits, mask, b; - - if (old_base != new_base) { -#ifdef CONFIG_GT64260 - bits = 12; - mask = 0x07000000; -#else /* Must be mv64[34]60 */ - bits = 16; - mask = 0x03000000; -#endif - b = in_le32(old_base + MV64x60_INTERNAL_SPACE_DECODE); - b &= mask; - b |= ((u32)new_base >> (32 - bits)); - out_le32(old_base + MV64x60_INTERNAL_SPACE_DECODE, b); - - __asm__ __volatile__("sync"); - - /* Wait for change to happen (in accordance with the manual) */ - while (in_le32(new_base + MV64x60_INTERNAL_SPACE_DECODE) != b); - } -} - -void __attribute__ ((weak)) -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ -} - -void * -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, - void *ign1, void *ign2) -{ - mv64x60_move_base((void __iomem *)CONFIG_MV64X60_BASE, - (void __iomem *)CONFIG_MV64X60_NEW_BASE); - mv64x60_board_init((void __iomem *)CONFIG_MV64X60_BASE, - (void __iomem *)CONFIG_MV64X60_NEW_BASE); - return decompress_kernel(load_addr, num_words, cksum); -} diff --git a/arch/ppc/boot/simple/misc-prep.c b/arch/ppc/boot/simple/misc-prep.c deleted file mode 100644 index 0086e1cfb48..00000000000 --- a/arch/ppc/boot/simple/misc-prep.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Maintainer: Tom Rini <trini@kernel.crashing.org> - * - * In the past: Gary Thomas, Cort Dougan <cort@cs.nmt.edu> - */ - -#include <linux/pci_ids.h> -#include <linux/types.h> -#include <asm/residual.h> -#include <asm/string.h> -#include <asm/byteorder.h> -#include "mpc10x.h" -#include "of1275.h" -#include "nonstdio.h" - -extern int keyb_present; /* keyboard controller is present by default */ -RESIDUAL hold_resid_buf; -RESIDUAL *hold_residual = &hold_resid_buf; -static void *OFW_interface; /* Pointer to OF, if available. */ - -#ifdef CONFIG_VGA_CONSOLE -char *vidmem = (char *)0xC00B8000; -int lines = 25, cols = 80; -int orig_x, orig_y = 24; -#endif /* CONFIG_VGA_CONSOLE */ - -extern int CRT_tstc(void); -extern int vga_init(unsigned char *ISA_mem); -extern void gunzip(void *, int, unsigned char *, int *); -extern unsigned long serial_init(int chan, void *ignored); -extern void serial_fixups(void); -extern struct bi_record *decompress_kernel(unsigned long load_addr, - int num_words, unsigned long cksum); -extern void disable_6xx_mmu(void); -extern unsigned long mpc10x_get_mem_size(void); - -static void -writel(unsigned int val, unsigned int address) -{ - /* Ensure I/O operations complete */ - __asm__ volatile("eieio"); - *(unsigned int *)address = cpu_to_le32(val); -} - -#define PCI_CFG_ADDR(dev,off) ((0x80<<24) | (dev<<8) | (off&0xfc)) -#define PCI_CFG_DATA(off) (MPC10X_MAPA_CNFG_DATA+(off&3)) - -static void -pci_read_config_32(unsigned char devfn, - unsigned char offset, - unsigned int *val) -{ - /* Ensure I/O operations complete */ - __asm__ volatile("eieio"); - *(unsigned int *)PCI_CFG_ADDR(devfn,offset) = - cpu_to_le32(MPC10X_MAPA_CNFG_ADDR); - /* Ensure I/O operations complete */ - __asm__ volatile("eieio"); - *val = le32_to_cpu(*(unsigned int *)PCI_CFG_DATA(offset)); - return; -} - -#ifdef CONFIG_VGA_CONSOLE -void -scroll(void) -{ - int i; - - memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 ); - for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 ) - vidmem[i] = ' '; -} -#endif /* CONFIG_VGA_CONSOLE */ - -unsigned long -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, - RESIDUAL *residual, void *OFW) -{ - int start_multi = 0; - unsigned int pci_viddid, pci_did, tulip_pci_base, tulip_base; - - /* If we have Open Firmware, initialise it immediately */ - if (OFW) { - OFW_interface = OFW; - ofinit(OFW_interface); - } - - board_isa_init(); -#if defined(CONFIG_VGA_CONSOLE) - vga_init((unsigned char *)0xC0000000); -#endif /* CONFIG_VGA_CONSOLE */ - - if (residual) { - /* Is this Motorola PPCBug? */ - if ((1 & residual->VitalProductData.FirmwareSupports) && - (1 == residual->VitalProductData.FirmwareSupplier)) { - unsigned char base_mod; - unsigned char board_type = inb(0x801) & 0xF0; - - /* - * Reset the onboard 21x4x Ethernet - * Motorola Ethernet is at IDSEL 14 (devfn 0x70) - */ - pci_read_config_32(0x70, 0x00, &pci_viddid); - pci_did = (pci_viddid & 0xffff0000) >> 16; - /* Be sure we've really found a 21x4x chip */ - if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_DEC) && - ((pci_did == PCI_DEVICE_ID_DEC_TULIP_FAST) || - (pci_did == PCI_DEVICE_ID_DEC_TULIP) || - (pci_did == PCI_DEVICE_ID_DEC_TULIP_PLUS) || - (pci_did == PCI_DEVICE_ID_DEC_21142))) { - pci_read_config_32(0x70, - 0x10, - &tulip_pci_base); - /* Get the physical base address */ - tulip_base = - (tulip_pci_base & ~0x03UL) + 0x80000000; - /* Strobe the 21x4x reset bit in CSR0 */ - writel(0x1, tulip_base); - } - - /* If this is genesis 2 board then check for no - * keyboard controller and more than one processor. - */ - if (board_type == 0xe0) { - base_mod = inb(0x803); - /* if a MVME2300/2400 or a Sitka then no keyboard */ - if((base_mod == 0xFA) || (base_mod == 0xF9) || - (base_mod == 0xE1)) { - keyb_present = 0; /* no keyboard */ - } - } - /* If this is a multiprocessor system then - * park the other processor so that the - * kernel knows where to find them. - */ - if (residual->MaxNumCpus > 1) - start_multi = 1; - } - memcpy(hold_residual,residual,sizeof(RESIDUAL)); - } - - /* Call decompress_kernel */ - decompress_kernel(load_addr, num_words, cksum); - - if (start_multi) { - residual->VitalProductData.SmpIar = (unsigned long)0xc0; - residual->Cpus[1].CpuState = CPU_GOOD; - hold_residual->VitalProductData.Reserved5 = 0xdeadbeef; - } - - /* Now go and clear out the BATs and ensure that our MSR is - * correct .*/ - disable_6xx_mmu(); - - /* Make r3 be a pointer to the residual data. */ - return (unsigned long)hold_residual; -} - -unsigned long -get_mem_size(void) -{ - unsigned int pci_viddid, pci_did; - - /* First, figure out what kind of host bridge we are on. If it's - * an MPC10x, we can ask it directly how much memory it has. - * Otherwise, see if the residual data has anything. This isn't - * the best way, but it can be the only way. If there's nothing, - * assume 32MB. -- Tom. - */ - /* See what our host bridge is. */ - pci_read_config_32(0x00, 0x00, &pci_viddid); - pci_did = (pci_viddid & 0xffff0000) >> 16; - /* See if we are on an MPC10x. */ - if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_MOTOROLA) - && ((pci_did == PCI_DEVICE_ID_MOTOROLA_MPC105) - || (pci_did == PCI_DEVICE_ID_MOTOROLA_MPC106) - || (pci_did == PCI_DEVICE_ID_MOTOROLA_MPC107))) - return mpc10x_get_mem_size(); - /* If it's not, see if we have anything in the residual data. */ - else if (hold_residual && hold_residual->TotalMemory) - return hold_residual->TotalMemory; - else if (OFW_interface) { - /* - * This is a 'best guess' check. We want to make sure - * we don't try this on a PReP box without OF - * -- Cort - */ - while (OFW_interface) - { - phandle dev_handle; - int mem_info[2]; - - /* get handle to memory description */ - if (!(dev_handle = finddevice("/memory@0"))) - break; - - /* get the info */ - if (getprop(dev_handle, "reg", mem_info, - sizeof(mem_info)) != 8) - break; - - return mem_info[1]; - } - } - - /* Fall back to hard-coding 32MB. */ - return 32*1024*1024; -} diff --git a/arch/ppc/boot/simple/misc-radstone_ppc7d.c b/arch/ppc/boot/simple/misc-radstone_ppc7d.c deleted file mode 100644 index 0f302ea9c3d..00000000000 --- a/arch/ppc/boot/simple/misc-radstone_ppc7d.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Misc data for Radstone PPC7D board. - * - * Author: James Chapman <jchapman@katalix.com> - */ - -#include <linux/types.h> -#include <platforms/radstone_ppc7d.h> - -#if defined(CONFIG_SERIAL_MPSC_CONSOLE) -extern u32 mv64x60_console_baud; -extern u32 mv64x60_mpsc_clk_src; -extern u32 mv64x60_mpsc_clk_freq; -#endif - -void -mv64x60_board_init(void __iomem *old_base, void __iomem *new_base) -{ -#if defined(CONFIG_SERIAL_MPSC_CONSOLE) - mv64x60_console_baud = PPC7D_DEFAULT_BAUD; - mv64x60_mpsc_clk_src = PPC7D_MPSC_CLK_SRC; - mv64x60_mpsc_clk_freq = PPC7D_MPSC_CLK_FREQ; -#endif -} diff --git a/arch/ppc/boot/simple/misc-spruce.c b/arch/ppc/boot/simple/misc-spruce.c deleted file mode 100644 index 5b3a6c6f113..00000000000 --- a/arch/ppc/boot/simple/misc-spruce.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * Misc. bootloader code for IBM Spruce reference platform - * - * Authors: Johnnie Peters <jpeters@mvista.com> - * Matt Porter <mporter@mvista.com> - * - * Derived from arch/ppc/boot/prep/misc.c - * - * 2000-2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <linux/pci.h> - -#include <asm/bootinfo.h> - -extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, - unsigned long cksum); - -/* Define some important locations of the Spruce. */ -#define SPRUCE_PCI_CONFIG_ADDR 0xfec00000 -#define SPRUCE_PCI_CONFIG_DATA 0xfec00004 - -/* PCI configuration space access routines. */ -unsigned int *pci_config_address = (unsigned int *)SPRUCE_PCI_CONFIG_ADDR; -unsigned char *pci_config_data = (unsigned char *)SPRUCE_PCI_CONFIG_DATA; - -void cpc700_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char *val) -{ - out_le32(pci_config_address, - (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000)); - - *val= (in_le32((unsigned *)pci_config_data) >> (8 * (offset & 3))) & 0xff; -} - -void cpc700_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char val) -{ - out_le32(pci_config_address, - (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000)); - - out_8(pci_config_data + (offset&3), val); -} - -void cpc700_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short *val) -{ - out_le32(pci_config_address, - (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000)); - - *val= in_le16((unsigned short *)(pci_config_data + (offset&3))); -} - -void cpc700_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short val) -{ - out_le32(pci_config_address, - (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000)); - - out_le16((unsigned short *)(pci_config_data + (offset&3)), val); -} - -void cpc700_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int *val) -{ - out_le32(pci_config_address, - (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000)); - - *val= in_le32((unsigned *)pci_config_data); -} - -void cpc700_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int val) -{ - out_le32(pci_config_address, - (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000)); - - out_le32((unsigned *)pci_config_data, val); -} - -#define PCNET32_WIO_RDP 0x10 -#define PCNET32_WIO_RAP 0x12 -#define PCNET32_WIO_RESET 0x14 - -#define PCNET32_DWIO_RDP 0x10 -#define PCNET32_DWIO_RAP 0x14 -#define PCNET32_DWIO_RESET 0x18 - -/* Processor interface config register access */ -#define PIFCFGADDR 0xff500000 -#define PIFCFGDATA 0xff500004 - -#define PLBMIFOPT 0x18 /* PLB Master Interface Options */ - -#define MEM_MBEN 0x24 -#define MEM_TYPE 0x28 -#define MEM_B1SA 0x3c -#define MEM_B1EA 0x5c -#define MEM_B2SA 0x40 -#define MEM_B2EA 0x60 - -unsigned long -get_mem_size(void) -{ - int loop; - unsigned long mem_size = 0; - unsigned long mem_mben; - unsigned long mem_type; - unsigned long mem_start; - unsigned long mem_end; - volatile int *mem_addr = (int *)0xff500008; - volatile int *mem_data = (int *)0xff50000c; - - /* Get the size of memory from the memory controller. */ - *mem_addr = MEM_MBEN; - asm("sync"); - mem_mben = *mem_data; - asm("sync"); - for(loop = 0; loop < 1000; loop++); - - *mem_addr = MEM_TYPE; - asm("sync"); - mem_type = *mem_data; - asm("sync"); - for(loop = 0; loop < 1000; loop++); - - *mem_addr = MEM_TYPE; - /* Confirm bank 1 has DRAM memory */ - if ((mem_mben & 0x40000000) && - ((mem_type & 0x30000000) == 0x10000000)) { - *mem_addr = MEM_B1SA; - asm("sync"); - mem_start = *mem_data; - asm("sync"); - for(loop = 0; loop < 1000; loop++); - - *mem_addr = MEM_B1EA; - asm("sync"); - mem_end = *mem_data; - asm("sync"); - for(loop = 0; loop < 1000; loop++); - - mem_size = mem_end - mem_start + 0x100000; - } - - /* Confirm bank 2 has DRAM memory */ - if ((mem_mben & 0x20000000) && - ((mem_type & 0xc000000) == 0x4000000)) { - *mem_addr = MEM_B2SA; - asm("sync"); - mem_start = *mem_data; - asm("sync"); - for(loop = 0; loop < 1000; loop++); - - *mem_addr = MEM_B2EA; - asm("sync"); - mem_end = *mem_data; - asm("sync"); - for(loop = 0; loop < 1000; loop++); - - mem_size += mem_end - mem_start + 0x100000; - } - return mem_size; -} - -unsigned long -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, - void *ign1, void *ign2) -{ - int csr0; - int csr_id; - int pci_devfn; - int found_multi = 0; - unsigned short vendor; - unsigned short device; - unsigned short command; - unsigned char header_type; - unsigned int bar0; - volatile int *pif_addr = (int *)0xff500000; - volatile int *pif_data = (int *)0xff500004; - - /* - * Gah, these firmware guys need to learn that hardware - * byte swapping is evil! Disable all hardware byte - * swapping so it doesn't hurt anyone. - */ - *pif_addr = PLBMIFOPT; - asm("sync"); - *pif_data = 0x00000000; - asm("sync"); - - /* Search out and turn off the PcNet ethernet boot device. */ - for (pci_devfn = 1; pci_devfn < 0xff; pci_devfn++) { - if (PCI_FUNC(pci_devfn) && !found_multi) - continue; - - cpc700_pcibios_read_config_byte(0, pci_devfn, - PCI_HEADER_TYPE, &header_type); - - if (!PCI_FUNC(pci_devfn)) - found_multi = header_type & 0x80; - - cpc700_pcibios_read_config_word(0, pci_devfn, PCI_VENDOR_ID, - &vendor); - - if (vendor != 0xffff) { - cpc700_pcibios_read_config_word(0, pci_devfn, - PCI_DEVICE_ID, &device); - - /* If this PCI device is the Lance PCNet board then turn it off */ - if ((vendor == PCI_VENDOR_ID_AMD) && - (device == PCI_DEVICE_ID_AMD_LANCE)) { - - /* Turn on I/O Space on the board. */ - cpc700_pcibios_read_config_word(0, pci_devfn, - PCI_COMMAND, &command); - command |= 0x1; - cpc700_pcibios_write_config_word(0, pci_devfn, - PCI_COMMAND, command); - - /* Get the I/O space address */ - cpc700_pcibios_read_config_dword(0, pci_devfn, - PCI_BASE_ADDRESS_0, &bar0); - bar0 &= 0xfffffffe; - - /* Reset the PCNet Board */ - inl (bar0+PCNET32_DWIO_RESET); - inw (bar0+PCNET32_WIO_RESET); - - /* First do a work oriented read of csr0. If the value is - * 4 then this is the correct mode to access the board. - * If not try a double word ortiented read. - */ - outw(0, bar0 + PCNET32_WIO_RAP); - csr0 = inw(bar0 + PCNET32_WIO_RDP); - - if (csr0 == 4) { - /* Check the Chip id register */ - outw(88, bar0 + PCNET32_WIO_RAP); - csr_id = inw(bar0 + PCNET32_WIO_RDP); - - if (csr_id) { - /* This is the valid mode - set the stop bit */ - outw(0, bar0 + PCNET32_WIO_RAP); - outw(csr0, bar0 + PCNET32_WIO_RDP); - } - } else { - outl(0, bar0 + PCNET32_DWIO_RAP); - csr0 = inl(bar0 + PCNET32_DWIO_RDP); - if (csr0 == 4) { - /* Check the Chip id register */ - outl(88, bar0 + PCNET32_WIO_RAP); - csr_id = inl(bar0 + PCNET32_WIO_RDP); - - if (csr_id) { - /* This is the valid mode - set the stop bit*/ - outl(0, bar0 + PCNET32_WIO_RAP); - outl(csr0, bar0 + PCNET32_WIO_RDP); - } - } - } - } - } - } - - return decompress_kernel(load_addr, num_words, cksum); -} diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c deleted file mode 100644 index c3d3305eb5c..00000000000 --- a/arch/ppc/boot/simple/misc.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * Misc. bootloader code for many machines. This assumes you have are using - * a 6xx/7xx/74xx CPU in your machine. This assumes the chunk of memory - * below 8MB is free. Finally, it assumes you have a NS16550-style uart for - * your serial console. If a machine meets these requirements, it can quite - * likely use this code during boot. - * - * Author: Matt Porter <mporter@mvista.com> - * Derived from arch/ppc/boot/prep/misc.c - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <linux/string.h> - -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/bootinfo.h> -#ifdef CONFIG_4xx -#include <asm/ibm4xx.h> -#endif -#include <asm/reg.h> - -#include "nonstdio.h" - -/* Default cmdline */ -#ifdef CONFIG_CMDLINE -#define CMDLINE CONFIG_CMDLINE -#else -#define CMDLINE "" -#endif - -/* Keyboard (and VGA console)? */ -#ifdef CONFIG_VGA_CONSOLE -#define HAS_KEYB 1 -#else -#define HAS_KEYB 0 -#endif - -/* Will / Can the user give input? - */ -#if (defined(CONFIG_SERIAL_8250_CONSOLE) \ - || defined(CONFIG_VGA_CONSOLE) \ - || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE)) -#define INTERACTIVE_CONSOLE 1 -#endif - -char *avail_ram; -char *end_avail; -char *zimage_start; -char cmd_preset[] = CMDLINE; -char cmd_buf[256]; -char *cmd_line = cmd_buf; -int keyb_present = HAS_KEYB; -int zimage_size; - -unsigned long com_port; -unsigned long initrd_size = 0; - -/* The linker tells us various locations in the image */ -extern char __image_begin, __image_end; -extern char __ramdisk_begin, __ramdisk_end; -extern char _end[]; -/* Original location */ -extern unsigned long start; - -extern int CRT_tstc(void); -extern unsigned long serial_init(int chan, void *ignored); -extern void serial_close(unsigned long com_port); -extern void gunzip(void *, int, unsigned char *, int *); -extern void serial_fixups(void); - -/* Allow get_mem_size to be hooked into. This is the default. */ -unsigned long __attribute__ ((weak)) -get_mem_size(void) -{ - return 0; -} - -#if defined(CONFIG_40x) -#define PPC4xx_EMAC0_MR0 EMAC0_BASE -#endif - -#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0) -#define PPC4xx_EMAC0_MR0 PPC44x_EMAC0_MR0 -#endif - -struct bi_record * -decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) -{ -#ifdef INTERACTIVE_CONSOLE - int timer = 0; - char ch; -#endif - char *cp; - struct bi_record *rec; - unsigned long initrd_loc = 0, TotalMemory = 0; - -#if defined(CONFIG_SERIAL_8250_CONSOLE) || defined(CONFIG_SERIAL_MPSC_CONSOLE) - com_port = serial_init(0, NULL); -#endif - -#if defined(PPC4xx_EMAC0_MR0) - /* Reset MAL */ - mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); - /* Wait for reset */ - while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; - /* Reset EMAC */ - *(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000; - __asm__ __volatile__("eieio"); -#endif - - /* - * Call get_mem_size(), which is memory controller dependent, - * and we must have the correct file linked in here. - */ - TotalMemory = get_mem_size(); - - /* assume the chunk below 8M is free */ - end_avail = (char *)0x00800000; - - /* - * Reveal where we were loaded at and where we - * were relocated to. - */ - puts("loaded at: "); puthex(load_addr); - puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); - puts("\n"); - if ( (unsigned long)load_addr != (unsigned long)&start ) - { - puts("relocated to: "); puthex((unsigned long)&start); - puts(" "); - puthex((unsigned long)((unsigned long)&start + (4*num_words))); - puts("\n"); - } - - /* - * We link ourself to 0x00800000. When we run, we relocate - * ourselves there. So we just need __image_begin for the - * start. -- Tom - */ - zimage_start = (char *)(unsigned long)(&__image_begin); - zimage_size = (unsigned long)(&__image_end) - - (unsigned long)(&__image_begin); - - initrd_size = (unsigned long)(&__ramdisk_end) - - (unsigned long)(&__ramdisk_begin); - - /* - * The zImage and initrd will be between start and _end, so they've - * already been moved once. We're good to go now. -- Tom - */ - avail_ram = (char *)PAGE_ALIGN((unsigned long)_end); - puts("zimage at: "); puthex((unsigned long)zimage_start); - puts(" "); puthex((unsigned long)(zimage_size+zimage_start)); - puts("\n"); - - if ( initrd_size ) { - puts("initrd at: "); - puthex((unsigned long)(&__ramdisk_begin)); - puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n"); - } - -#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */ - avail_ram = (char *)0x00400000; -#endif - end_avail = (char *)0x00800000; - puts("avail ram: "); puthex((unsigned long)avail_ram); puts(" "); - puthex((unsigned long)end_avail); puts("\n"); - - if (keyb_present) - CRT_tstc(); /* Forces keyboard to be initialized */ - - /* Display standard Linux/PPC boot prompt for kernel args */ - puts("\nLinux/PPC load: "); - cp = cmd_line; - memcpy (cmd_line, cmd_preset, sizeof(cmd_preset)); - while ( *cp ) putc(*cp++); - -#ifdef INTERACTIVE_CONSOLE - /* - * If they have a console, allow them to edit the command line. - * Otherwise, don't bother wasting the five seconds. - */ - while (timer++ < 5*1000) { - if (tstc()) { - while ((ch = getc()) != '\n' && ch != '\r') { - /* Test for backspace/delete */ - if (ch == '\b' || ch == '\177') { - if (cp != cmd_line) { - cp--; - puts("\b \b"); - } - /* Test for ^x/^u (and wipe the line) */ - } else if (ch == '\030' || ch == '\025') { - while (cp != cmd_line) { - cp--; - puts("\b \b"); - } - } else { - *cp++ = ch; - putc(ch); - } - } - break; /* Exit 'timer' loop */ - } - udelay(1000); /* 1 msec */ - } - *cp = 0; -#endif - puts("\n"); - - puts("Uncompressing Linux..."); - gunzip(NULL, 0x400000, zimage_start, &zimage_size); - puts("done.\n"); - - /* get the bi_rec address */ - rec = bootinfo_addr(zimage_size); - - /* We need to make sure that the initrd and bi_recs do not - * overlap. */ - if ( initrd_size ) { - unsigned long rec_loc = (unsigned long) rec; - initrd_loc = (unsigned long)(&__ramdisk_begin); - /* If the bi_recs are in the middle of the current - * initrd, move the initrd to the next MB - * boundary. */ - if ((rec_loc > initrd_loc) && - ((initrd_loc + initrd_size) > rec_loc)) { - initrd_loc = _ALIGN((unsigned long)(zimage_size) - + (2 << 20) - 1, (2 << 20)); - memmove((void *)initrd_loc, &__ramdisk_begin, - initrd_size); - puts("initrd moved: "); puthex(initrd_loc); - puts(" "); puthex(initrd_loc + initrd_size); - puts("\n"); - } - } - - bootinfo_init(rec); - if ( TotalMemory ) - bootinfo_append(BI_MEMSIZE, sizeof(int), (void*)&TotalMemory); - - bootinfo_append(BI_CMD_LINE, strlen(cmd_line)+1, (void*)cmd_line); - - /* add a bi_rec for the initrd if it exists */ - if (initrd_size) { - unsigned long initrd[2]; - - initrd[0] = initrd_loc; - initrd[1] = initrd_size; - - bootinfo_append(BI_INITRD, sizeof(initrd), &initrd); - } - puts("Now booting the kernel\n"); - serial_close(com_port); - - return rec; -} - -void __attribute__ ((weak)) -board_isa_init(void) -{ -} - -/* Allow decompress_kernel to be hooked into. This is the default. */ -void * __attribute__ ((weak)) -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, - void *ign1, void *ign2) -{ - board_isa_init(); - return decompress_kernel(load_addr, num_words, cksum); -} diff --git a/arch/ppc/boot/simple/mpc10x_memory.c b/arch/ppc/boot/simple/mpc10x_memory.c deleted file mode 100644 index 8da8f576031..00000000000 --- a/arch/ppc/boot/simple/mpc10x_memory.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * A routine to find out how much memory the machine has. - * - * Based on: - * arch/ppc/kernel/mpc10x_common.c - * - * Author: Mark A. Greer - * mgreer@mvista.com - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/pci.h> -#include <asm/types.h> -#include <asm/io.h> -#include "mpc10x.h" - -/* - * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs *** - */ - -/* - * PCI config space macros, similar to indirect_xxx and early_xxx macros. - * We assume bus 0. - */ -#define MPC10X_CFG_read(val, addr, type, op) *val = op((type)(addr)) -#define MPC10X_CFG_write(val, addr, type, op) op((type *)(addr), (val)) - -#define MPC10X_PCI_OP(rw, size, type, op, mask) \ -static void \ -mpc10x_##rw##_config_##size(unsigned int __iomem *cfg_addr, \ - unsigned int *cfg_data, int devfn, int offset, \ - type val) \ -{ \ - out_be32(cfg_addr, \ - ((offset & 0xfc) << 24) | (devfn << 16) \ - | (0 << 8) | 0x80); \ - MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op); \ - return; \ -} - -MPC10X_PCI_OP(read, byte, u8 *, in_8, 3) -MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0) - -/* - * Read the memory controller registers to determine the amount of memory in - * the system. This assumes that the firmware has correctly set up the memory - * controller registers. On CONFIG_PPC_PREP, we know we are being called - * under a PReP memory map. On all other machines, we assume we are under - * a CHRP memory map. Further, on CONFIG_PPC_PREP we must rename - * this function. - */ -#ifdef CONFIG_PPC_PREP -#define get_mem_size mpc10x_get_mem_size -#endif -unsigned long -get_mem_size(void) -{ - unsigned int *config_addr, *config_data, val; - unsigned long start, end, total, offset; - int i; - unsigned char bank_enables; - -#ifdef CONFIG_PPC_PREP - config_addr = (unsigned int *)MPC10X_MAPA_CNFG_ADDR; - config_data = (unsigned int *)MPC10X_MAPA_CNFG_DATA; -#else - config_addr = (unsigned int *)MPC10X_MAPB_CNFG_ADDR; - config_data = (unsigned int *)MPC10X_MAPB_CNFG_DATA; -#endif - - mpc10x_read_config_byte(config_addr, config_data, PCI_DEVFN(0,0), - MPC10X_MCTLR_MEM_BANK_ENABLES, &bank_enables); - - total = 0; - - for (i = 0; i < 8; i++) { - if (bank_enables & (1 << i)) { - offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0); - mpc10x_read_config_dword(config_addr, config_data, - PCI_DEVFN(0,0), offset, &val); - start = (val >> ((i & 3) << 3)) & 0xff; - - offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0); - mpc10x_read_config_dword(config_addr, config_data, - PCI_DEVFN(0,0), offset, &val); - val = (val >> ((i & 3) << 3)) & 0x03; - start = (val << 28) | (start << 20); - - offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0); - mpc10x_read_config_dword(config_addr, config_data, - PCI_DEVFN(0,0), offset, &val); - end = (val >> ((i & 3) << 3)) & 0xff; - - offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0); - mpc10x_read_config_dword(config_addr, config_data, - PCI_DEVFN(0,0), offset, &val); - val = (val >> ((i & 3) << 3)) & 0x03; - end = (val << 28) | (end << 20) | 0xfffff; - - total += (end - start + 1); - } - } - - return total; -} diff --git a/arch/ppc/boot/simple/mpc52xx_tty.c b/arch/ppc/boot/simple/mpc52xx_tty.c deleted file mode 100644 index 6955891fb03..00000000000 --- a/arch/ppc/boot/simple/mpc52xx_tty.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Minimal serial functions needed to send messages out a MPC52xx - * Programmable Serial Controller (PSC). - * - * Author: Dale Farnsworth <dfarnsworth@mvista.com> - * - * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - -#include <linux/types.h> -#include <asm/uaccess.h> -#include <asm/mpc52xx.h> -#include <asm/mpc52xx_psc.h> -#include <asm/serial.h> -#include <asm/io.h> -#include <asm/time.h> - - -#ifdef MPC52xx_PF_CONSOLE_PORT -#define MPC52xx_CONSOLE MPC52xx_PSCx_OFFSET(MPC52xx_PF_CONSOLE_PORT) -#define MPC52xx_PSC_CONFIG_SHIFT ((MPC52xx_PF_CONSOLE_PORT-1)<<2) -#else -#error "MPC52xx_PF_CONSOLE_PORT not defined" -#endif - -static struct mpc52xx_psc __iomem *psc = - (struct mpc52xx_psc __iomem *) MPC52xx_PA(MPC52xx_CONSOLE); - -/* The decrementer counts at the system bus clock frequency - * divided by four. The most accurate time base is connected to the - * rtc. We read the decrementer change during one rtc tick - * and multiply by 4 to get the system bus clock frequency. Since a - * rtc tick is one seconds, and that's pretty long, we change the rtc - * dividers temporarily to set them 64x faster ;) - */ -static int -mpc52xx_ipbfreq(void) -{ - struct mpc52xx_rtc __iomem *rtc = - (struct mpc52xx_rtc __iomem *) MPC52xx_PA(MPC52xx_RTC_OFFSET); - struct mpc52xx_cdm __iomem *cdm = - (struct mpc52xx_cdm __iomem *) MPC52xx_PA(MPC52xx_CDM_OFFSET); - int current_time, previous_time; - int tbl_start, tbl_end; - int xlbfreq, ipbfreq; - - out_be32(&rtc->dividers, 0x8f1f0000); /* Set RTC 64x faster */ - previous_time = in_be32(&rtc->time); - while ((current_time = in_be32(&rtc->time)) == previous_time) ; - tbl_start = get_tbl(); - previous_time = current_time; - while ((current_time = in_be32(&rtc->time)) == previous_time) ; - tbl_end = get_tbl(); - out_be32(&rtc->dividers, 0xffff0000); /* Restore RTC */ - - xlbfreq = (tbl_end - tbl_start) << 8; - ipbfreq = (in_8(&cdm->ipb_clk_sel) & 1) ? xlbfreq / 2 : xlbfreq; - - return ipbfreq; -} - -unsigned long -serial_init(int ignored, void *ignored2) -{ - struct mpc52xx_gpio __iomem *gpio = - (struct mpc52xx_gpio __iomem *) MPC52xx_PA(MPC52xx_GPIO_OFFSET); - int divisor; - int mode1; - int mode2; - u32 val32; - - static int been_here = 0; - - if (been_here) - return 0; - - been_here = 1; - - val32 = in_be32(&gpio->port_config); - val32 &= ~(0x7 << MPC52xx_PSC_CONFIG_SHIFT); - val32 |= MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD - << MPC52xx_PSC_CONFIG_SHIFT; - out_be32(&gpio->port_config, val32); - - out_8(&psc->command, MPC52xx_PSC_RST_TX - | MPC52xx_PSC_RX_DISABLE | MPC52xx_PSC_TX_ENABLE); - out_8(&psc->command, MPC52xx_PSC_RST_RX); - - out_be32(&psc->sicr, 0x0); - out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); - out_be16(&psc->tfalarm, 0xf8); - - out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1 - | MPC52xx_PSC_RX_ENABLE - | MPC52xx_PSC_TX_ENABLE); - - divisor = ((mpc52xx_ipbfreq() - / (CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD * 16)) + 1) >> 1; - - mode1 = MPC52xx_PSC_MODE_8_BITS | MPC52xx_PSC_MODE_PARNONE - | MPC52xx_PSC_MODE_ERR; - mode2 = MPC52xx_PSC_MODE_ONE_STOP; - - out_8(&psc->ctur, divisor>>8); - out_8(&psc->ctlr, divisor); - out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); - out_8(&psc->mode, mode1); - out_8(&psc->mode, mode2); - - return 0; /* ignored */ -} - -void -serial_putc(void *ignored, const char c) -{ - serial_init(0, NULL); - - while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP)) ; - out_8(&psc->mpc52xx_psc_buffer_8, c); - while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP)) ; -} - -char -serial_getc(void *ignored) -{ - while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY)) ; - - return in_8(&psc->mpc52xx_psc_buffer_8); -} - -int -serial_tstc(void *ignored) -{ - return (in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY) != 0; -} diff --git a/arch/ppc/boot/simple/mv64x60_tty.c b/arch/ppc/boot/simple/mv64x60_tty.c deleted file mode 100644 index 8a735787a6e..00000000000 --- a/arch/ppc/boot/simple/mv64x60_tty.c +++ /dev/null @@ -1,364 +0,0 @@ -/* - * Bootloader version of the embedded MPSC/UART driver for the Marvell 64x60. - * Note: Due to a GT64260A erratum, DMA will be used for UART input (via SDMA). - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2001 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* This code assumes that the data cache has been disabled (L1, L2, L3). */ - -#include <linux/types.h> -#include <linux/serial_reg.h> -#include <asm/serial.h> -#include <asm/io.h> -#include <asm/mv64x60_defs.h> -#include <mpsc_defs.h> - -#ifdef CONFIG_EV64360 -#include <platforms/ev64360.h> -u32 mv64x60_console_baud = EV64360_DEFAULT_BAUD; -u32 mv64x60_mpsc_clk_src = EV64360_MPSC_CLK_SRC; /* TCLK */ -u32 mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ; -#else -u32 mv64x60_console_baud = 9600; -u32 mv64x60_mpsc_clk_src = 8; /* TCLK */ -u32 mv64x60_mpsc_clk_freq = 100000000; -#endif - -extern void udelay(long); -static void stop_dma(int chan); - -static void __iomem *mv64x60_base = (void __iomem *)CONFIG_MV64X60_NEW_BASE; - -struct sdma_regs { - u32 sdc; - u32 sdcm; - u32 rx_desc; - u32 rx_buf_ptr; - u32 scrdp; - u32 tx_desc; - u32 sctdp; - u32 sftdp; -}; - -static struct sdma_regs sdma_regs[2]; - -#define SDMA_REGS_INIT(s, reg_base) { \ - (s)->sdc = (reg_base) + SDMA_SDC; \ - (s)->sdcm = (reg_base) + SDMA_SDCM; \ - (s)->rx_desc = (reg_base) + SDMA_RX_DESC; \ - (s)->rx_buf_ptr = (reg_base) + SDMA_RX_BUF_PTR; \ - (s)->scrdp = (reg_base) + SDMA_SCRDP; \ - (s)->tx_desc = (reg_base) + SDMA_TX_DESC; \ - (s)->sctdp = (reg_base) + SDMA_SCTDP; \ - (s)->sftdp = (reg_base) + SDMA_SFTDP; \ -} - -static u32 mpsc_base[2] = { MV64x60_MPSC_0_OFFSET, MV64x60_MPSC_1_OFFSET }; - -struct mv64x60_rx_desc { - u16 bufsize; - u16 bytecnt; - u32 cmd_stat; - u32 next_desc_ptr; - u32 buffer; -}; - -struct mv64x60_tx_desc { - u16 bytecnt; - u16 shadow; - u32 cmd_stat; - u32 next_desc_ptr; - u32 buffer; -}; - -#define MAX_RESET_WAIT 10000 -#define MAX_TX_WAIT 10000 - -#define RX_NUM_DESC 2 -#define TX_NUM_DESC 2 - -#define RX_BUF_SIZE 32 -#define TX_BUF_SIZE 32 - -static struct mv64x60_rx_desc rd[2][RX_NUM_DESC] __attribute__ ((aligned(32))); -static struct mv64x60_tx_desc td[2][TX_NUM_DESC] __attribute__ ((aligned(32))); - -static char rx_buf[2][RX_NUM_DESC * RX_BUF_SIZE] __attribute__ ((aligned(32))); -static char tx_buf[2][TX_NUM_DESC * TX_BUF_SIZE] __attribute__ ((aligned(32))); - -static int cur_rd[2] = { 0, 0 }; -static int cur_td[2] = { 0, 0 }; - -static char chan_initialized[2] = { 0, 0 }; - - -#define RX_INIT_RDP(rdp) { \ - (rdp)->bufsize = 2; \ - (rdp)->bytecnt = 0; \ - (rdp)->cmd_stat = SDMA_DESC_CMDSTAT_L | SDMA_DESC_CMDSTAT_F | \ - SDMA_DESC_CMDSTAT_O; \ -} - -#ifdef CONFIG_MV64360 -static u32 cpu2mem_tab[MV64x60_CPU2MEM_WINDOWS][2] = { - { MV64x60_CPU2MEM_0_BASE, MV64x60_CPU2MEM_0_SIZE }, - { MV64x60_CPU2MEM_1_BASE, MV64x60_CPU2MEM_1_SIZE }, - { MV64x60_CPU2MEM_2_BASE, MV64x60_CPU2MEM_2_SIZE }, - { MV64x60_CPU2MEM_3_BASE, MV64x60_CPU2MEM_3_SIZE } -}; - -static u32 com2mem_tab[MV64x60_CPU2MEM_WINDOWS][2] = { - { MV64360_MPSC2MEM_0_BASE, MV64360_MPSC2MEM_0_SIZE }, - { MV64360_MPSC2MEM_1_BASE, MV64360_MPSC2MEM_1_SIZE }, - { MV64360_MPSC2MEM_2_BASE, MV64360_MPSC2MEM_2_SIZE }, - { MV64360_MPSC2MEM_3_BASE, MV64360_MPSC2MEM_3_SIZE } -}; - -static u32 dram_selects[MV64x60_CPU2MEM_WINDOWS] = { 0xe, 0xd, 0xb, 0x7 }; -#endif - -unsigned long -serial_init(int chan, void *ignored) -{ - u32 mpsc_routing_base, sdma_base, brg_bcr, cdv; - int i; - - chan = (chan == 1); /* default to chan 0 if anything but 1 */ - - if (chan_initialized[chan]) - return chan; - - chan_initialized[chan] = 1; - - if (chan == 0) { - sdma_base = MV64x60_SDMA_0_OFFSET; - brg_bcr = MV64x60_BRG_0_OFFSET + BRG_BCR; - SDMA_REGS_INIT(&sdma_regs[0], MV64x60_SDMA_0_OFFSET); - } else { - sdma_base = MV64x60_SDMA_1_OFFSET; - brg_bcr = MV64x60_BRG_1_OFFSET + BRG_BCR; - SDMA_REGS_INIT(&sdma_regs[0], MV64x60_SDMA_1_OFFSET); - } - - mpsc_routing_base = MV64x60_MPSC_ROUTING_OFFSET; - - stop_dma(chan); - - /* Set up ring buffers */ - for (i=0; i<RX_NUM_DESC; i++) { - RX_INIT_RDP(&rd[chan][i]); - rd[chan][i].buffer = (u32)&rx_buf[chan][i * RX_BUF_SIZE]; - rd[chan][i].next_desc_ptr = (u32)&rd[chan][i+1]; - } - rd[chan][RX_NUM_DESC - 1].next_desc_ptr = (u32)&rd[chan][0]; - - for (i=0; i<TX_NUM_DESC; i++) { - td[chan][i].bytecnt = 0; - td[chan][i].shadow = 0; - td[chan][i].buffer = (u32)&tx_buf[chan][i * TX_BUF_SIZE]; - td[chan][i].cmd_stat = SDMA_DESC_CMDSTAT_F|SDMA_DESC_CMDSTAT_L; - td[chan][i].next_desc_ptr = (u32)&td[chan][i+1]; - } - td[chan][TX_NUM_DESC - 1].next_desc_ptr = (u32)&td[chan][0]; - - /* Set MPSC Routing */ - out_le32(mv64x60_base + mpsc_routing_base + MPSC_MRR, 0x3ffffe38); - -#ifdef CONFIG_GT64260 - out_le32(mv64x60_base + GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102); -#else /* Must be MV64360 or MV64460 */ - { - u32 enables, prot_bits, v; - - /* Set up comm unit to memory mapping windows */ - /* Note: Assumes MV64x60_CPU2MEM_WINDOWS == 4 */ - - enables = in_le32(mv64x60_base + MV64360_CPU_BAR_ENABLE) & 0xf; - prot_bits = 0; - - for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) { - if (!(enables & (1 << i))) { - v = in_le32(mv64x60_base + cpu2mem_tab[i][0]); - v = ((v & 0xffff) << 16) | (dram_selects[i] << 8); - out_le32(mv64x60_base + com2mem_tab[i][0], v); - - v = in_le32(mv64x60_base + cpu2mem_tab[i][1]); - v = (v & 0xffff) << 16; - out_le32(mv64x60_base + com2mem_tab[i][1], v); - - prot_bits |= (0x3 << (i << 1)); /* r/w access */ - } - } - - out_le32(mv64x60_base + MV64360_MPSC_0_REMAP, 0); - out_le32(mv64x60_base + MV64360_MPSC_1_REMAP, 0); - out_le32(mv64x60_base + MV64360_MPSC2MEM_ACC_PROT_0, prot_bits); - out_le32(mv64x60_base + MV64360_MPSC2MEM_ACC_PROT_1, prot_bits); - out_le32(mv64x60_base + MV64360_MPSC2MEM_BAR_ENABLE, enables); - } -#endif - - /* MPSC 0/1 Rx & Tx get clocks BRG0/1 */ - out_le32(mv64x60_base + mpsc_routing_base + MPSC_RCRR, 0x00000100); - out_le32(mv64x60_base + mpsc_routing_base + MPSC_TCRR, 0x00000100); - - /* clear pending interrupts */ - out_le32(mv64x60_base + MV64x60_SDMA_INTR_OFFSET + SDMA_INTR_MASK, 0); - - out_le32(mv64x60_base + SDMA_SCRDP + sdma_base, (int)&rd[chan][0]); - out_le32(mv64x60_base + SDMA_SCTDP + sdma_base, - (int)&td[chan][TX_NUM_DESC - 1]); - out_le32(mv64x60_base + SDMA_SFTDP + sdma_base, - (int)&td[chan][TX_NUM_DESC - 1]); - - out_le32(mv64x60_base + SDMA_SDC + sdma_base, - SDMA_SDC_RFT | SDMA_SDC_SFM | SDMA_SDC_BLMR | SDMA_SDC_BLMT | - (3 << 12)); - - cdv = ((mv64x60_mpsc_clk_freq/(32*mv64x60_console_baud))-1); - out_le32(mv64x60_base + brg_bcr, - ((mv64x60_mpsc_clk_src << 18) | (1 << 16) | cdv)); - - /* Put MPSC into UART mode, no null modem, 16x clock mode */ - out_le32(mv64x60_base + MPSC_MMCRL + mpsc_base[chan], 0x000004c4); - out_le32(mv64x60_base + MPSC_MMCRH + mpsc_base[chan], 0x04400400); - - out_le32(mv64x60_base + MPSC_CHR_1 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_9 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_10 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_3 + mpsc_base[chan], 4); - out_le32(mv64x60_base + MPSC_CHR_4 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_5 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_6 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_7 + mpsc_base[chan], 0); - out_le32(mv64x60_base + MPSC_CHR_8 + mpsc_base[chan], 0); - - /* 8 data bits, 1 stop bit */ - out_le32(mv64x60_base + MPSC_MPCR + mpsc_base[chan], (3 << 12)); - out_le32(mv64x60_base + SDMA_SDCM + sdma_base, SDMA_SDCM_ERD); - out_le32(mv64x60_base + MPSC_CHR_2 + mpsc_base[chan], MPSC_CHR_2_EH); - - udelay(100); - - return chan; -} - -static void -stop_dma(int chan) -{ - int i; - - /* Abort MPSC Rx (aborting Tx messes things up) */ - out_le32(mv64x60_base + MPSC_CHR_2 + mpsc_base[chan], MPSC_CHR_2_RA); - - /* Abort SDMA Rx, Tx */ - out_le32(mv64x60_base + sdma_regs[chan].sdcm, - SDMA_SDCM_AR | SDMA_SDCM_STD); - - for (i=0; i<MAX_RESET_WAIT; i++) { - if ((in_le32(mv64x60_base + sdma_regs[chan].sdcm) & - (SDMA_SDCM_AR | SDMA_SDCM_AT)) == 0) - break; - - udelay(100); - } -} - -static int -wait_for_ownership(int chan) -{ - int i; - - for (i=0; i<MAX_TX_WAIT; i++) { - if ((in_le32(mv64x60_base + sdma_regs[chan].sdcm) & - SDMA_SDCM_TXD) == 0) - break; - - udelay(1000); - } - - return (i < MAX_TX_WAIT); -} - -void -serial_putc(unsigned long com_port, unsigned char c) -{ - struct mv64x60_tx_desc *tdp; - - if (wait_for_ownership(com_port) == 0) - return; - - tdp = &td[com_port][cur_td[com_port]]; - if (++cur_td[com_port] >= TX_NUM_DESC) - cur_td[com_port] = 0; - - *(unchar *)(tdp->buffer ^ 7) = c; - tdp->bytecnt = 1; - tdp->shadow = 1; - tdp->cmd_stat = SDMA_DESC_CMDSTAT_L | SDMA_DESC_CMDSTAT_F | - SDMA_DESC_CMDSTAT_O; - - out_le32(mv64x60_base + sdma_regs[com_port].sctdp, (int)tdp); - out_le32(mv64x60_base + sdma_regs[com_port].sftdp, (int)tdp); - out_le32(mv64x60_base + sdma_regs[com_port].sdcm, - in_le32(mv64x60_base + sdma_regs[com_port].sdcm) | - SDMA_SDCM_TXD); -} - -unsigned char -serial_getc(unsigned long com_port) -{ - struct mv64x60_rx_desc *rdp; - unchar c = '\0'; - - rdp = &rd[com_port][cur_rd[com_port]]; - - if ((rdp->cmd_stat & (SDMA_DESC_CMDSTAT_O|SDMA_DESC_CMDSTAT_ES)) == 0) { - c = *(unchar *)(rdp->buffer ^ 7); - RX_INIT_RDP(rdp); - if (++cur_rd[com_port] >= RX_NUM_DESC) - cur_rd[com_port] = 0; - } - - return c; -} - -int -serial_tstc(unsigned long com_port) -{ - struct mv64x60_rx_desc *rdp; - int loop_count = 0; - int rc = 0; - - rdp = &rd[com_port][cur_rd[com_port]]; - - /* Go through rcv descs until empty looking for one with data (no error)*/ - while (((rdp->cmd_stat & SDMA_DESC_CMDSTAT_O) == 0) && - (loop_count++ < RX_NUM_DESC)) { - - /* If there was an error, reinit the desc & continue */ - if ((rdp->cmd_stat & SDMA_DESC_CMDSTAT_ES) != 0) { - RX_INIT_RDP(rdp); - if (++cur_rd[com_port] >= RX_NUM_DESC) - cur_rd[com_port] = 0; - rdp = (struct mv64x60_rx_desc *)rdp->next_desc_ptr; - } else { - rc = 1; - break; - } - } - - return rc; -} - -void -serial_close(unsigned long com_port) -{ - stop_dma(com_port); -} diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c deleted file mode 100644 index 6ff2701598f..00000000000 --- a/arch/ppc/boot/simple/openbios.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Copyright (c) 2005 DENX Software Engineering - * Stefan Roese <sr@denx.de> - * - * Based on original work by - * 2005 (c) SYSGO AG - g.jaeger@sysgo.com - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <asm/ppcboot.h> -#include <asm/ibm4xx.h> -#include <asm/reg.h> -#ifdef CONFIG_40x -#include <asm/io.h> -#endif - -#if defined(CONFIG_BUBINGA) -#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */ -#else -#define BOARD_INFO_VECTOR 0xFFFE0B50 -#endif - -#ifdef CONFIG_40x -/* Supply a default Ethernet address for those eval boards that don't - * ship with one. This is an address from the MBX board I have, so - * it is unlikely you will find it on your network. - */ -static ushort def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 }; - -extern unsigned long timebase_period_ns; -#endif /* CONFIG_40x */ - -extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, - unsigned long cksum); - -/* We need to make sure that this is before the images to ensure - * that it's in a mapped location. */ -bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot"))); -bd_t *hold_residual = &hold_resid_buf; - -typedef struct openbios_board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ -#ifdef CONFIG_405EP - unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ -#else /* CONFIG_405EP */ - unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ -#endif /* CONFIG_405EP */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ -#ifdef CONFIG_405EP - unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */ - unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ -#endif /* CONFIG_405EP */ -} openbios_bd_t; - -void * -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, - void *ign1, void *ign2) -{ -#ifdef CONFIG_40x - openbios_bd_t *openbios_bd = NULL; - openbios_bd_t *(*get_board_info)(void) = - (openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR); - - /* - * On 40x platforms we not only need the MAC-addresses, but also the - * clocks and memsize. Now try to get all values using the OpenBIOS - * "get_board_info()" callback. - */ - if ((openbios_bd = get_board_info()) != NULL) { - /* - * Copy bd_info from OpenBIOS struct into U-Boot struct - * used by kernel - */ - hold_residual->bi_memsize = openbios_bd->bi_memsize; - hold_residual->bi_intfreq = openbios_bd->bi_intfreq; - hold_residual->bi_busfreq = openbios_bd->bi_busfreq; - hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq; - memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6); -#ifdef CONFIG_405EP - memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6); - memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6); - hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq; - hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq; -#else /* CONFIG_405EP */ - memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6); -#endif /* CONFIG_405EP */ - } else { - /* Hmmm...better try to stuff some defaults. - */ - hold_residual->bi_memsize = 16 * 1024 * 1024; - hold_residual->bi_intfreq = 200000000; - hold_residual->bi_busfreq = 100000000; - hold_residual->bi_pci_busfreq = 66666666; - - /* - * Only supply one mac-address in this fallback - */ - memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6); -#ifdef CONFIG_405EP - hold_residual->bi_opbfreq = 50000000; - hold_residual->bi_procfreq = 200000000; -#endif /* CONFIG_405EP */ - } - - timebase_period_ns = 1000000000 / hold_residual->bi_intfreq; -#endif /* CONFIG_40x */ - -#ifdef CONFIG_440GP - /* simply copy the MAC addresses */ - memcpy(hold_residual->bi_enetaddr, (char *)OPENBIOS_MAC_BASE, 6); - memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6); -#endif /* CONFIG_440GP */ - - decompress_kernel(load_addr, num_words, cksum); - - return (void *)hold_residual; -} diff --git a/arch/ppc/boot/simple/pci.c b/arch/ppc/boot/simple/pci.c deleted file mode 100644 index b0f673c8b7d..00000000000 --- a/arch/ppc/boot/simple/pci.c +++ /dev/null @@ -1,274 +0,0 @@ -/* Stand alone funtions for QSpan Tundra support. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <asm/mpc8xx.h> - -extern void puthex(unsigned long val); -extern void puts(const char *); - -/* To map PCI devices, you first write 0xffffffff into the device - * base address registers. When the register is read back, the - * number of most significant '1' bits describes the amount of address - * space needed for mapping. If the most significant bit is not set, - * either the device does not use that address register, or it has - * a fixed address that we can't change. After the address is assigned, - * the command register has to be written to enable the card. - */ -typedef struct { - u_char pci_bus; - u_char pci_devfn; - ushort pci_command; - uint pci_addrs[6]; -} pci_map_t; - -/* We should probably dynamically allocate these structures. -*/ -#define MAX_PCI_DEVS 32 -int pci_dev_cnt; -pci_map_t pci_map[MAX_PCI_DEVS]; - -void pci_conf_write(int bus, int device, int func, int reg, uint writeval); -void pci_conf_read(int bus, int device, int func, int reg, void *readval); -void probe_addresses(int bus, int devfn); -void map_pci_addrs(void); - -extern int -qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char *val); -extern int -qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short *val); -extern int -qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int *val); -extern int -qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char val); -extern int -qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short val); -extern int -qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int val); - - -/* This is a really stripped version of PCI bus scan. All we are - * looking for are devices that exist. - */ -void -pci_scanner(int addr_probe) -{ - unsigned int devfn, l, class, bus_number; - unsigned char hdr_type, is_multi; - - is_multi = 0; - bus_number = 0; - for (devfn = 0; devfn < 0xff; ++devfn) { - /* The device numbers are comprised of upper 5 bits of - * device number and lower 3 bits of multi-function number. - */ - if ((devfn & 7) && !is_multi) { - /* Don't scan multifunction addresses if this is - * not a multifunction device. - */ - continue; - } - - /* Read the header to determine card type. - */ - qs_pci_read_config_byte(bus_number, devfn, PCI_HEADER_TYPE, - &hdr_type); - - /* If this is a base device number, check the header to - * determine if it is mulifunction. - */ - if ((devfn & 7) == 0) - is_multi = hdr_type & 0x80; - - /* Check to see if the board is really in the slot. - */ - qs_pci_read_config_dword(bus_number, devfn, PCI_VENDOR_ID, &l); - /* some broken boards return 0 if a slot is empty: */ - if (l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff || - l == 0xffff0000) { - /* Nothing there. - */ - is_multi = 0; - continue; - } - - /* If we are not performing an address probe, - * just simply print out some information. - */ - if (!addr_probe) { - qs_pci_read_config_dword(bus_number, devfn, - PCI_CLASS_REVISION, &class); - - class >>= 8; /* upper 3 bytes */ - -#if 0 - printf("Found (%3d:%d): vendor 0x%04x, device 0x%04x, class 0x%06x\n", - (devfn >> 3), (devfn & 7), - (l & 0xffff), (l >> 16) & 0xffff, class); -#else - puts("Found ("); puthex(devfn >> 3); - puts(":"); puthex(devfn & 7); - puts("): vendor "); puthex(l & 0xffff); - puts(", device "); puthex((l >> 16) & 0xffff); - puts(", class "); puthex(class); puts("\n"); -#endif - } - else { - /* If this is a "normal" device, build address list. - */ - if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_NORMAL) - probe_addresses(bus_number, devfn); - } - } - - /* Now map the boards. - */ - if (addr_probe) - map_pci_addrs(); -} - -/* Probe addresses for the specified device. This is a destructive - * operation because it writes the registers. - */ -void -probe_addresses(bus, devfn) -{ - int i; - uint pciaddr; - ushort pcicmd; - pci_map_t *pm; - - if (pci_dev_cnt >= MAX_PCI_DEVS) { - puts("Too many PCI devices\n"); - return; - } - - pm = &pci_map[pci_dev_cnt++]; - - pm->pci_bus = bus; - pm->pci_devfn = devfn; - - for (i=0; i<6; i++) { - qs_pci_write_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4), -1); - qs_pci_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4), - &pciaddr); - pm->pci_addrs[i] = pciaddr; - qs_pci_read_config_word(bus, devfn, PCI_COMMAND, &pcicmd); - pm->pci_command = pcicmd; - } -} - -/* Map the cards into the PCI space. The PCI has separate memory - * and I/O spaces. In addition, some memory devices require mapping - * below 1M. The least significant 4 bits of the address register - * provide information. If this is an I/O device, only the LS bit - * is used to indicate that, so I/O devices can be mapped to a two byte - * boundard. Memory addresses can be mapped to a 32 byte boundary. - * The QSpan implementations usually have a 1Gbyte space for each - * memory and I/O spaces. - * - * This isn't a terribly fancy algorithm. I just map the spaces from - * the top starting with the largest address space. When finished, - * the registers are written and the card enabled. - * - * While the Tundra can map a large address space on most boards, we - * need to be careful because it may overlap other devices (like IMMR). - */ -#define MEMORY_SPACE_SIZE 0x20000000 -#define IO_SPACE_SIZE 0x20000000 - -void -map_pci_addrs() -{ - uint pci_mem_top, pci_mem_low; - uint pci_io_top; - uint addr_mask, reg_addr, space; - int i, j; - pci_map_t *pm; - - pci_mem_top = MEMORY_SPACE_SIZE; - pci_io_top = IO_SPACE_SIZE; - pci_mem_low = (1 * 1024 * 1024); /* Below one meg addresses */ - - /* We can't map anything more than the maximum space, but test - * for it anyway to catch devices out of range. - */ - addr_mask = 0x80000000; - - do { - space = (~addr_mask) + 1; /* Size of the space */ - for (i=0; i<pci_dev_cnt; i++) { - pm = &pci_map[i]; - for (j=0; j<6; j++) { - /* If the MS bit is not set, this has either - * already been mapped, or is not used. - */ - reg_addr = pm->pci_addrs[j]; - if ((reg_addr & 0x80000000) == 0) - continue; - if (reg_addr & PCI_BASE_ADDRESS_SPACE_IO) { - if ((reg_addr & PCI_BASE_ADDRESS_IO_MASK) != addr_mask) - continue; - if (pci_io_top < space) { - puts("Out of PCI I/O space\n"); - } - else { - pci_io_top -= space; - pm->pci_addrs[j] = pci_io_top; - pm->pci_command |= PCI_COMMAND_IO; - } - } - else { - if ((reg_addr & PCI_BASE_ADDRESS_MEM_MASK) != addr_mask) - continue; - - /* Memory space. Test if below 1M. - */ - if (reg_addr & PCI_BASE_ADDRESS_MEM_TYPE_1M) { - if (pci_mem_low < space) { - puts("Out of PCI 1M space\n"); - } - else { - pci_mem_low -= space; - pm->pci_addrs[j] = pci_mem_low; - } - } - else { - if (pci_mem_top < space) { - puts("Out of PCI Mem space\n"); - } - else { - pci_mem_top -= space; - pm->pci_addrs[j] = pci_mem_top; - } - } - pm->pci_command |= PCI_COMMAND_MEMORY; - } - } - } - addr_mask >>= 1; - addr_mask |= 0x80000000; - } while (addr_mask != 0xfffffffe); - - /* Now, run the list one more time and map everything. - */ - for (i=0; i<pci_dev_cnt; i++) { - pm = &pci_map[i]; - for (j=0; j<6; j++) { - qs_pci_write_config_dword(pm->pci_bus, pm->pci_devfn, - PCI_BASE_ADDRESS_0 + (j * 4), pm->pci_addrs[j]); - } - - /* Enable memory or address mapping. - */ - qs_pci_write_config_word(pm->pci_bus, pm->pci_devfn, PCI_COMMAND, - pm->pci_command); - } -} - diff --git a/arch/ppc/boot/simple/pibs.c b/arch/ppc/boot/simple/pibs.c deleted file mode 100644 index f39d01e0619..00000000000 --- a/arch/ppc/boot/simple/pibs.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * 2004-2005 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <asm/ppcboot.h> -#include <asm/ibm4xx.h> - -extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, - unsigned long cksum); - -/* We need to make sure that this is before the images to ensure - * that it's in a mapped location. - Tom */ -bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot"))); -bd_t *hold_residual = &hold_resid_buf; - -/* String functions lifted from lib/vsprintf.c and lib/ctype.c */ -unsigned char _ctype[] = { -_C,_C,_C,_C,_C,_C,_C,_C, /* 0-7 */ -_C,_C|_S,_C|_S,_C|_S,_C|_S,_C|_S,_C,_C, /* 8-15 */ -_C,_C,_C,_C,_C,_C,_C,_C, /* 16-23 */ -_C,_C,_C,_C,_C,_C,_C,_C, /* 24-31 */ -_S|_SP,_P,_P,_P,_P,_P,_P,_P, /* 32-39 */ -_P,_P,_P,_P,_P,_P,_P,_P, /* 40-47 */ -_D,_D,_D,_D,_D,_D,_D,_D, /* 48-55 */ -_D,_D,_P,_P,_P,_P,_P,_P, /* 56-63 */ -_P,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U, /* 64-71 */ -_U,_U,_U,_U,_U,_U,_U,_U, /* 72-79 */ -_U,_U,_U,_U,_U,_U,_U,_U, /* 80-87 */ -_U,_U,_U,_P,_P,_P,_P,_P, /* 88-95 */ -_P,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L, /* 96-103 */ -_L,_L,_L,_L,_L,_L,_L,_L, /* 104-111 */ -_L,_L,_L,_L,_L,_L,_L,_L, /* 112-119 */ -_L,_L,_L,_P,_P,_P,_P,_C, /* 120-127 */ -0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ -0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ -_S|_SP,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 160-175 */ -_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 176-191 */ -_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U, /* 192-207 */ -_U,_U,_U,_U,_U,_U,_U,_P,_U,_U,_U,_U,_U,_U,_U,_L, /* 208-223 */ -_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L, /* 224-239 */ -_L,_L,_L,_L,_L,_L,_L,_P,_L,_L,_L,_L,_L,_L,_L,_L}; /* 240-255 */ - -/** - * simple_strtoull - convert a string to an unsigned long long - * @cp: The start of the string - * @endp: A pointer to the end of the parsed string will be placed here - * @base: The number base to use - */ -unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base) -{ - unsigned long long result = 0,value; - - if (!base) { - base = 10; - if (*cp == '0') { - base = 8; - cp++; - if ((toupper(*cp) == 'X') && isxdigit(cp[1])) { - cp++; - base = 16; - } - } - } else if (base == 16) { - if (cp[0] == '0' && toupper(cp[1]) == 'X') - cp += 2; - } - while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp) - ? toupper(*cp) : *cp)-'A'+10) < base) { - result = result*base + value; - cp++; - } - if (endp) - *endp = (char *)cp; - return result; -} - -void * -load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, - void *ign1, void *ign2) -{ - unsigned long long mac64; - - decompress_kernel(load_addr, num_words, cksum); - - mac64 = simple_strtoull((char *)PIBS_MAC_BASE, 0, 16); - memcpy(hold_residual->bi_enetaddr, (char *)&mac64+2, 6); -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) - mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET), 0, 16); - memcpy(hold_residual->bi_enet1addr, (char *)&mac64+2, 6); -#endif -#ifdef CONFIG_440GX - mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*2), 0, 16); - memcpy(hold_residual->bi_enet2addr, (char *)&mac64+2, 6); - mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*3), 0, 16); - memcpy(hold_residual->bi_enet3addr, (char *)&mac64+2, 6); -#endif - return (void *)hold_residual; -} diff --git a/arch/ppc/boot/simple/prepmap.c b/arch/ppc/boot/simple/prepmap.c deleted file mode 100644 index c871a4db6e8..00000000000 --- a/arch/ppc/boot/simple/prepmap.c +++ /dev/null @@ -1,12 +0,0 @@ -/* - * 2004 (C) IBM. This file is licensed under the terms of the GNU General - * Public License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <nonstdio.h> - -void board_isa_init(void) -{ - ISA_init(0x80000000); -} diff --git a/arch/ppc/boot/simple/qspan_pci.c b/arch/ppc/boot/simple/qspan_pci.c deleted file mode 100644 index d2966d032a4..00000000000 --- a/arch/ppc/boot/simple/qspan_pci.c +++ /dev/null @@ -1,269 +0,0 @@ -/* - * LinuxPPC arch/ppc/kernel/qspan_pci.c Dan Malek (dmalek@jlc.net) - * - * QSpan Motorola bus to PCI bridge. The config address register - * is located 0x500 from the base of the bridge control/status registers. - * The data register is located at 0x504. - * This is a two step operation. First, the address register is written, - * then the data register is read/written as required. - * I don't know what to do about interrupts (yet). - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <asm/mpc8xx.h> - -/* - * When reading the configuration space, if something does not respond - * the bus times out and we get a machine check interrupt. So, the - * good ol' exception tables come to mind to trap it and return some - * value. - * - * On an error we just return a -1, since that is what the caller wants - * returned if nothing is present. I copied this from __get_user_asm, - * with the only difference of returning -1 instead of EFAULT. - * There is an associated hack in the machine check trap code. - * - * The QSPAN is also a big endian device, that is it makes the PCI - * look big endian to us. This presents a problem for the Linux PCI - * functions, which assume little endian. For example, we see the - * first 32-bit word like this: - * ------------------------ - * | Device ID | Vendor ID | - * ------------------------ - * If we read/write as a double word, that's OK. But in our world, - * when read as a word, device ID is at location 0, not location 2 as - * the little endian PCI would believe. We have to switch bits in - * the PCI addresses given to us to get the data to/from the correct - * byte lanes. - * - * The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5. - * It always forces the MS bit to zero. Therefore, dev_fn values - * greater than 128 are returned as "no device found" errors. - * - * The QSPAN can only perform long word (32-bit) configuration cycles. - * The "offset" must have the two LS bits set to zero. Read operations - * require we read the entire word and then sort out what should be - * returned. Write operations other than long word require that we - * read the long word, update the proper word or byte, then write the - * entire long word back. - * - * PCI Bridge hack. We assume (correctly) that bus 0 is the primary - * PCI bus from the QSPAN. If we are called with a bus number other - * than zero, we create a Type 1 configuration access that a downstream - * PCI bridge will interpret. - */ - -#define __get_pci_config(x, addr, op) \ - __asm__ __volatile__( \ - "1: "op" %0,0(%1)\n" \ - " eieio\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,-1\n" \ - " b 2b\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".text" \ - : "=r"(x) : "r"(addr)) - -#define QS_CONFIG_ADDR ((volatile uint *)(PCI_CSR_ADDR + 0x500)) -#define QS_CONFIG_DATA ((volatile uint *)(PCI_CSR_ADDR + 0x504)) - -#define mk_config_addr(bus, dev, offset) \ - (((bus)<<16) | ((dev)<<8) | (offset & 0xfc)) - -#define mk_config_type1(bus, dev, offset) \ - mk_config_addr(bus, dev, offset) | 1; - -/* Initialize the QSpan device registers after power up. -*/ -void -qspan_init(void) -{ - uint *qptr; - - - - qptr = (uint *)PCI_CSR_ADDR; - - /* PCI Configuration/status. Upper bits written to clear - * pending interrupt or status. Lower bits enable QSPAN as - * PCI master, enable memory and I/O cycles, and enable PCI - * parity error checking. - * IMPORTANT: The last two bits of this word enable PCI - * master cycles into the QBus. The QSpan is broken and can't - * meet the timing specs of the PQ bus for this to work. Therefore, - * if you don't have external bus arbitration, you can't use - * this function. - */ -#ifdef EXTERNAL_PQ_ARB - qptr[1] = 0xf9000147; -#else - qptr[1] = 0xf9000144; -#endif - - /* PCI Misc configuration. Set PCI latency timer resolution - * of 8 cycles, set cache size to 4 x 32. - */ - qptr[3] = 0; - - /* Set up PCI Target address mapping. Enable, Posted writes, - * 2Gbyte space (processor memory controller determines actual size). - */ - qptr[64] = 0x8f000080; - - /* Map processor 0x80000000 to PCI 0x00000000. - * Processor address bit 1 determines I/O type access (0x80000000) - * or memory type access (0xc0000000). - */ - qptr[65] = 0x80000000; - - /* Enable error logging and clear any pending error status. - */ - qptr[80] = 0x90000000; - - qptr[512] = 0x000c0003; - - /* Set up Qbus slave image. - */ - qptr[960] = 0x01000000; - qptr[961] = 0x000000d1; - qptr[964] = 0x00000000; - qptr[965] = 0x000000d1; - -} - -/* Functions to support PCI bios-like features to read/write configuration - * space. If the function fails for any reason, a -1 (0xffffffff) value - * must be returned. - */ -#define DEVICE_NOT_FOUND (-1) -#define SUCCESSFUL 0 - -int qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char *val) -{ - uint temp; - u_char *cp; - - if ((bus > 7) || (dev_fn > 127)) { - *val = 0xff; - return DEVICE_NOT_FOUND; - } - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - __get_pci_config(temp, QS_CONFIG_DATA, "lwz"); - - offset ^= 0x03; - cp = ((u_char *)&temp) + (offset & 0x03); - *val = *cp; - return SUCCESSFUL; -} - -int qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short *val) -{ - uint temp; - ushort *sp; - - if ((bus > 7) || (dev_fn > 127)) { - *val = 0xffff; - return DEVICE_NOT_FOUND; - } - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - __get_pci_config(temp, QS_CONFIG_DATA, "lwz"); - offset ^= 0x02; - - sp = ((ushort *)&temp) + ((offset >> 1) & 1); - *val = *sp; - return SUCCESSFUL; -} - -int qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int *val) -{ - if ((bus > 7) || (dev_fn > 127)) { - *val = 0xffffffff; - return DEVICE_NOT_FOUND; - } - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - __get_pci_config(*val, QS_CONFIG_DATA, "lwz"); - return SUCCESSFUL; -} - -int qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned char val) -{ - uint temp; - u_char *cp; - - if ((bus > 7) || (dev_fn > 127)) - return DEVICE_NOT_FOUND; - - qs_pci_read_config_dword(bus, dev_fn, offset, &temp); - - offset ^= 0x03; - cp = ((u_char *)&temp) + (offset & 0x03); - *cp = val; - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - *QS_CONFIG_DATA = temp; - - return SUCCESSFUL; -} - -int qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned short val) -{ - uint temp; - ushort *sp; - - if ((bus > 7) || (dev_fn > 127)) - return DEVICE_NOT_FOUND; - - qs_pci_read_config_dword(bus, dev_fn, offset, &temp); - - offset ^= 0x02; - sp = ((ushort *)&temp) + ((offset >> 1) & 1); - *sp = val; - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - *QS_CONFIG_DATA = temp; - - return SUCCESSFUL; -} - -int qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn, - unsigned char offset, unsigned int val) -{ - if ((bus > 7) || (dev_fn > 127)) - return DEVICE_NOT_FOUND; - - if (bus == 0) - *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset); - else - *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset); - *(unsigned int *)QS_CONFIG_DATA = val; - - return SUCCESSFUL; -} - diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S deleted file mode 100644 index 1bbbcd2f2bc..00000000000 --- a/arch/ppc/boot/simple/relocate.S +++ /dev/null @@ -1,213 +0,0 @@ -/* - * This is the common part of the loader relocation and initialization - * process. All of the board/processor specific initialization is - * done before we get here. - * - * Author: Tom Rini - * trini@mvista.com - * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others). - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <asm/cache.h> -#include <asm/ppc_asm.h> - -#define GETSYM(reg, sym) \ - lis reg, sym@h; ori reg, reg, sym@l - - .text - /* We get called from the early initialization code. - * Register 3 has the address where we were loaded, - * Register 4 contains any residual data passed from the - * boot rom. - */ - .globl relocate -relocate: - /* Save r3, r4 for later. - * The r8/r11 are legacy registers so I don't have to - * rewrite the code below :-). - */ - mr r8, r3 - mr r11, r4 - - /* compute the size of the whole image in words. */ - GETSYM(r4,start) - GETSYM(r5,end) - - addi r5,r5,3 /* round up */ - sub r5,r5,r4 /* end - start */ - srwi r5,r5,2 - mr r7,r5 /* Save for later use. */ - - /* - * Check if we need to relocate ourselves to the link addr or were - * we loaded there to begin with. - */ - cmpw cr0,r3,r4 - beq start_ldr /* If 0, we don't need to relocate */ - - /* Move this code somewhere safe. This is max(load + size, end) - * r8 == load address - */ - GETSYM(r4, start) - GETSYM(r5, end) - - sub r6,r5,r4 - add r6,r8,r6 /* r6 == phys(load + size) */ - - cmpw r5,r6 - bgt 1f - b 2f -1: - mr r6, r5 -2: - /* dest is in r6 */ - /* Ensure alignment --- this code is precautionary */ - addi r6,r6,4 - li r5,0x0003 - andc r6,r6,r5 - - /* Find physical address and size of do_relocate */ - GETSYM(r5, __relocate_start) - GETSYM(r4, __relocate_end) - GETSYM(r3, start) - - /* Size to copy */ - sub r4,r4,r5 - srwi r4,r4,2 - - /* Src addr to copy (= __relocate_start - start + where_loaded) */ - sub r3,r5,r3 - add r5,r8,r3 - - /* Save dest */ - mr r3, r6 - - /* Do the copy */ - mtctr r4 -3: lwz r4,0(r5) - stw r4,0(r3) - addi r3,r3,4 - addi r5,r5,4 - bdnz 3b - - GETSYM(r4, __relocate_start) - GETSYM(r5, do_relocate) - - sub r4,r5,r4 /* Get entry point for do_relocate in */ - add r6,r6,r4 /* relocated section */ - - /* This will return to the relocated do_relocate */ - mtlr r6 - b flush_instruction_cache - - .section ".relocate_code","xa" - -do_relocate: - /* We have 2 cases --- start < load, or start > load - * This determines whether we copy from the end, or the start. - * Its easier to have 2 loops than to have paramaterised - * loops. Sigh. - */ - li r6,0 /* Clear checksum */ - mtctr r7 /* Setup for a loop */ - - GETSYM(r4, start) - mr r3,r8 /* Get the load addr */ - - cmpw cr0,r4,r3 /* If we need to copy from the end, do so */ - bgt do_relocate_from_end - -do_relocate_from_start: -1: lwz r5,0(r3) /* Load and decrement */ - stw r5,0(r4) /* Store and decrement */ - addi r3,r3,4 - addi r4,r4,4 - xor r6,r6,r5 /* Update checksum */ - bdnz 1b /* Are we done? */ - b do_relocate_out /* Finished */ - -do_relocate_from_end: - GETSYM(r3, end) - slwi r4,r7,2 - add r4,r8,r4 /* Get the physical end */ -1: lwzu r5,-4(r4) - stwu r5, -4(r3) - xor r6,r6,r5 - bdnz 1b - -do_relocate_out: - GETSYM(r3,start_ldr) - mtlr r3 /* Easiest way to do an absolute jump */ -/* Some boards don't boot up with the I-cache enabled. Do that - * now because the decompress runs much faster that way. - * As a side effect, we have to ensure the data cache is not enabled - * so we can access the serial I/O without trouble. - */ - b flush_instruction_cache - - .previous - -start_ldr: -/* Clear all of BSS and set up stack for C calls */ - lis r3,__bss_start@h - ori r3,r3,__bss_start@l - lis r4,end@h - ori r4,r4,end@l - subi r3,r3,4 - subi r4,r4,4 - li r0,0 -50: stwu r0,4(r3) - cmpw cr0,r3,r4 - blt 50b -90: mr r9,r1 /* Save old stack pointer (in case it matters) */ - lis r1,.stack@h - ori r1,r1,.stack@l - addi r1,r1,4096*2 - subi r1,r1,256 - li r2,0x000F /* Mask pointer to 16-byte boundary */ - andc r1,r1,r2 - - /* - * Exec kernel loader - */ - mr r3,r8 /* Load point */ - mr r4,r7 /* Program length */ - mr r5,r6 /* Checksum */ - mr r6,r11 /* Residual data */ - mr r7,r25 /* Validated OFW interface */ - bl load_kernel - - /* - * Make sure the kernel knows we don't have things set in - * registers. -- Tom - */ - li r4,0 - li r5,0 - li r6,0 - - /* - * Start at the begining. - */ -#ifdef CONFIG_PPC_PREP - li r9,0xc - mtlr r9 - /* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD, - * and tell the kernel to start on the 4th instruction since we - * overwrite the first 3 sometimes (which are 'nop'). - */ - lis r10,0xdeadc0de@h - ori r10,r10,0xdeadc0de@l - li r9,0 - stw r10,0(r9) -#else - li r9,0 - mtlr r9 -#endif - blr - - .comm .stack,4096*2,4 diff --git a/arch/ppc/boot/simple/rw4/ppc_40x.h b/arch/ppc/boot/simple/rw4/ppc_40x.h deleted file mode 100644 index 561fb26f5a9..00000000000 --- a/arch/ppc/boot/simple/rw4/ppc_40x.h +++ /dev/null @@ -1,664 +0,0 @@ -/*----------------------------------------------------------------------------+ -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1997 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ -| Author: Tony J. Cerreto -| Component: Assembler include file. -| File: ppc_40x.h -| Purpose: Include file containing PPC DCR defines. -| -| Changes: -| Date Author Comment -| --------- ------ -------------------------------------------------------- -| 01-Mar-00 tjc Created -+----------------------------------------------------------------------------*/ -/* added by linguohui*/ -#define MW -/*----------------------------------------------------------------------------+ -| PPC Special purpose registers Numbers -+----------------------------------------------------------------------------*/ -#define ccr0 0x3b3 /* core configuration reg */ -#define ctr 0x009 /* count register */ -#define ctrreg 0x009 /* count register */ -#define dbcr0 0x3f2 /* debug control register 0 */ -#define dbcr1 0x3bd /* debug control register 1 */ -#define dbsr 0x3f0 /* debug status register */ -#define dccr 0x3fa /* data cache control reg. */ -#define dcwr 0x3ba /* data cache write-thru reg */ -#define dear 0x3d5 /* data exception address reg */ -#define esr 0x3d4 /* exception syndrome register */ -#define evpr 0x3d6 /* exception vector prefix reg */ -#define iccr 0x3fb /* instruction cache cntrl re */ -#define icdbdr 0x3d3 /* instr cache dbug data reg */ -#define lrreg 0x008 /* link register */ -#define pid 0x3b1 /* process id reg */ -#define pit 0x3db /* programmable interval time */ -#define pvr 0x11f /* processor version register */ -#define sgr 0x3b9 /* storage guarded reg */ -#define sler 0x3bb /* storage little endian reg */ -#define sprg0 0x110 /* special general purpose 0 */ -#define sprg1 0x111 /* special general purpose 1 */ -#define sprg2 0x112 /* special general purpose 2 */ -#define sprg3 0x113 /* special general purpose 3 */ -#define sprg4 0x114 /* special general purpose 4 */ -#define sprg5 0x115 /* special general purpose 5 */ -#define sprg6 0x116 /* special general purpose 6 */ -#define sprg7 0x117 /* special general purpose 7 */ -#define srr0 0x01a /* save/restore register 0 */ -#define srr1 0x01b /* save/restore register 1 */ -#define srr2 0x3de /* save/restore register 2 */ -#define srr3 0x3df /* save/restore register 3 */ -#define tbhi 0x11D -#define tblo 0x11C -#define tcr 0x3da /* timer control register */ -#define tsr 0x3d8 /* timer status register */ -#define xerreg 0x001 /* fixed point exception */ -#define xer 0x001 /* fixed point exception */ -#define zpr 0x3b0 /* zone protection reg */ - -/*----------------------------------------------------------------------------+ -| Decompression Controller -+----------------------------------------------------------------------------*/ -#define kiar 0x014 /* Decompression cntl addr reg */ -#define kidr 0x015 /* Decompression cntl data reg */ -#define kitor0 0x00 /* index table origin Reg 0 */ -#define kitor1 0x01 /* index table origin Reg 1 */ -#define kitor2 0x02 /* index table origin Reg 2 */ -#define kitor3 0x03 /* index table origin Reg 3 */ -#define kaddr0 0x04 /* addr decode Definition Reg 0 */ -#define kaddr1 0x05 /* addr decode Definition Reg 1 */ -#define kconf 0x40 /* Decompression cntl config reg */ -#define kid 0x41 /* Decompression cntl id reg */ -#define kver 0x42 /* Decompression cntl ver number */ -#define kpear 0x50 /* bus error addr reg (PLB) */ -#define kbear 0x51 /* bus error addr reg (DCP-EBC) */ -#define kesr0 0x52 /* bus error status reg 0 */ - -/*----------------------------------------------------------------------------+ -| Romeo Specific Device Control Register Numbers. -+----------------------------------------------------------------------------*/ -#ifndef VESTA -#define cdbcr 0x3d7 /* cache debug cntrl reg */ - -#define a_latcnt 0x1a9 /* PLB Latency count */ -#define a_tgval 0x1ac /* tone generation value */ -#define a_plb_pr 0x1bf /* PLB priority */ - -#define cic_sel1 0x031 /* select register 1 */ -#define cic_sel2 0x032 /* select register 2 */ - -#define clkgcrst 0x122 /* chip reset register */ - -#define cp_cpmsr 0x100 /*rstatus register */ -#define cp_cpmer 0x101 /* enable register */ - -#define dcp_kiar 0x190 /* indirect address register */ -#define dcp_kidr 0x191 /* indirect data register */ - -#define hsmc_mcgr 0x1c0 /* HSMC global register */ -#define hsmc_mcbesr 0x1c1 /* bus error status register */ -#define hsmc_mcbear 0x1c2 /* bus error address register*/ -#define hsmc_mcbr0 0x1c4 /* SDRAM sub-ctrl bank reg 0 */ -#define hsmc_mccr0 0x1c5 /* SDRAM sub-ctrl ctrl reg 0 */ -#define hsmc_mcbr1 0x1c7 /* SDRAM sub-ctrl bank reg 1 */ -#define hsmc_mccr1 0x1c8 /* SDRAM sub-ctrl ctrl reg 1 */ -#define hsmc_sysr 0x1d1 /* system register */ -#define hsmc_data 0x1d2 /* data register */ -#define hsmc_mccrr 0x1d3 /* refresh register */ - -#define ocm_pbar 0x1E0 /* base address register */ - -#define plb0_pacr0 0x057 /* PLB arbiter control reg */ -#define plb1_pacr1 0x067 /* PLB arbiter control reg */ - -#define v_displb 0x157 /* set left border of display*/ -#define v_disptb 0x158 /* top border of display */ -#define v_osd_la 0x159 /* first link address for OSD*/ -#define v_ptsdlta 0x15E /* PTS delta register */ -#define v_v0base 0x16C /* base mem add for VBI-0 */ -#define v_v1base 0x16D /* base mem add for VBI-1 */ -#define v_osbase 0x16E /* base mem add for OSD data */ -#endif - -/*----------------------------------------------------------------------------+ -| Vesta Device Control Register Numbers. -+----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ -| Cross bar switch. -+----------------------------------------------------------------------------*/ -#define cbs0_cr 0x010 /* CBS configuration register */ - -/*----------------------------------------------------------------------------+ -| DCR external master (DCRX). -+----------------------------------------------------------------------------*/ -#define dcrx0_icr 0x020 /* internal control register */ -#define dcrx0_isr 0x021 /* internal status register */ -#define dcrx0_ecr 0x022 /* external control register */ -#define dcrx0_esr 0x023 /* external status register */ -#define dcrx0_tar 0x024 /* target address register */ -#define dcrx0_tdr 0x025 /* target data register */ -#define dcrx0_igr 0x026 /* interrupt generation register */ -#define dcrx0_bcr 0x027 /* buffer control register */ - -/*----------------------------------------------------------------------------+ -| Chip interconnect configuration. -+----------------------------------------------------------------------------*/ -#define cic0_cr 0x030 /* CIC control register */ -#define cic0_vcr 0x033 /* video macro control reg */ -#define cic0_sel3 0x035 /* select register 3 */ - -/*----------------------------------------------------------------------------+ -| Chip interconnect configuration. -+----------------------------------------------------------------------------*/ -#define sgpo0_sgpO 0x036 /* simplified GPIO output */ -#define sgpo0_gpod 0x037 /* simplified GPIO open drain */ -#define sgpo0_gptc 0x038 /* simplified GPIO tristate cntl */ -#define sgpo0_gpi 0x039 /* simplified GPIO input */ - -/*----------------------------------------------------------------------------+ -| Universal interrupt controller. -+----------------------------------------------------------------------------*/ -#define uic0_sr 0x040 /* status register */ -#define uic0_srs 0x041 /* status register set */ -#define uic0_er 0x042 /* enable register */ -#define uic0_cr 0x043 /* critical register */ -#define uic0_pr 0x044 /* parity register */ -#define uic0_tr 0x045 /* triggering register */ -#define uic0_msr 0x046 /* masked status register */ -#define uic0_vr 0x047 /* vector register */ -#define uic0_vcr 0x048 /* enable config register */ - -/*----------------------------------------------------------------------------+ -| PLB 0 and 1. -+----------------------------------------------------------------------------*/ -#define pb0_pesr 0x054 /* PLB error status reg 0 */ -#define pb0_pesrs 0x055 /* PLB error status reg 0 set */ -#define pb0_pear 0x056 /* PLB error address reg */ - -#define pb1_pesr 0x064 /* PLB error status reg 1 */ -#define pb1_pesrs 0x065 /* PLB error status reg 1 set */ -#define pb1_pear 0x066 /* PLB error address reg */ - -/*----------------------------------------------------------------------------+ -| EBIU DCR registers. -+----------------------------------------------------------------------------*/ -#define ebiu0_brcrh0 0x070 /* bus region register 0 high */ -#define ebiu0_brcrh1 0x071 /* bus region register 1 high */ -#define ebiu0_brcrh2 0x072 /* bus region register 2 high */ -#define ebiu0_brcrh3 0x073 /* bus region register 3 high */ -#define ebiu0_brcrh4 0x074 /* bus region register 4 high */ -#define ebiu0_brcrh5 0x075 /* bus region register 5 high */ -#define ebiu0_brcrh6 0x076 /* bus region register 6 high */ -#define ebiu0_brcrh7 0x077 /* bus region register 7 high */ -#define ebiu0_brcr0 0x080 /* bus region register 0 */ -#define ebiu0_brcr1 0x081 /* bus region register 1 */ -#define ebiu0_brcr2 0x082 /* bus region register 2 */ -#define ebiu0_brcr3 0x083 /* bus region register 3 */ -#define ebiu0_brcr4 0x084 /* bus region register 4 */ -#define ebiu0_brcr5 0x085 /* bus region register 5 */ -#define ebiu0_brcr6 0x086 /* bus region register 6 */ -#define ebiu0_brcr7 0x087 /* bus region register 7 */ -#define ebiu0_bear 0x090 /* bus error address register */ -#define ebiu0_besr 0x091 /* bus error syndrome reg */ -#define ebiu0_besr0s 0x093 /* bus error syndrome reg */ -#define ebiu0_biucr 0x09a /* bus interface control reg */ - -/*----------------------------------------------------------------------------+ -| OPB bridge. -+----------------------------------------------------------------------------*/ -#define opbw0_gesr 0x0b0 /* error status reg */ -#define opbw0_gesrs 0x0b1 /* error status reg */ -#define opbw0_gear 0x0b2 /* error address reg */ - -/*----------------------------------------------------------------------------+ -| DMA. -+----------------------------------------------------------------------------*/ -#define dma0_cr0 0x0c0 /* DMA channel control reg 0 */ -#define dma0_ct0 0x0c1 /* DMA count register 0 */ -#define dma0_da0 0x0c2 /* DMA destination addr reg 0 */ -#define dma0_sa0 0x0c3 /* DMA source addr register 0 */ -#define dma0_cc0 0x0c4 /* DMA chained count 0 */ -#define dma0_cr1 0x0c8 /* DMA channel control reg 1 */ -#define dma0_ct1 0x0c9 /* DMA count register 1 */ -#define dma0_da1 0x0ca /* DMA destination addr reg 1 */ -#define dma0_sa1 0x0cb /* DMA source addr register 1 */ -#define dma0_cc1 0x0cc /* DMA chained count 1 */ -#define dma0_cr2 0x0d0 /* DMA channel control reg 2 */ -#define dma0_ct2 0x0d1 /* DMA count register 2 */ -#define dma0_da2 0x0d2 /* DMA destination addr reg 2 */ -#define dma0_sa2 0x0d3 /* DMA source addr register 2 */ -#define dma0_cc2 0x0d4 /* DMA chained count 2 */ -#define dma0_cr3 0x0d8 /* DMA channel control reg 3 */ -#define dma0_ct3 0x0d9 /* DMA count register 3 */ -#define dma0_da3 0x0da /* DMA destination addr reg 3 */ -#define dma0_sa3 0x0db /* DMA source addr register 3 */ -#define dma0_cc3 0x0dc /* DMA chained count 3 */ -#define dma0_sr 0x0e0 /* DMA status register */ -#define dma0_srs 0x0e1 /* DMA status register */ -#define dma0_s1 0x031 /* DMA select1 register */ -#define dma0_s2 0x032 /* DMA select2 register */ - -/*---------------------------------------------------------------------------+ -| Clock and power management. -+----------------------------------------------------------------------------*/ -#define cpm0_fr 0x102 /* force register */ - -/*----------------------------------------------------------------------------+ -| Serial Clock Control. -+----------------------------------------------------------------------------*/ -#define ser0_ccr 0x120 /* serial clock control register */ - -/*----------------------------------------------------------------------------+ -| Audio Clock Control. -+----------------------------------------------------------------------------*/ -#define aud0_apcr 0x121 /* audio clock ctrl register */ - -/*----------------------------------------------------------------------------+ -| DENC. -+----------------------------------------------------------------------------*/ -#define denc0_idr 0x130 /* DENC ID register */ -#define denc0_cr1 0x131 /* control register 1 */ -#define denc0_rr1 0x132 /* microvision 1 (reserved 1) */ -#define denc0_cr2 0x133 /* control register 2 */ -#define denc0_rr2 0x134 /* microvision 2 (reserved 2) */ -#define denc0_rr3 0x135 /* microvision 3 (reserved 3) */ -#define denc0_rr4 0x136 /* microvision 4 (reserved 4) */ -#define denc0_rr5 0x137 /* microvision 5 (reserved 5) */ -#define denc0_ccdr 0x138 /* closed caption data */ -#define denc0_cccr 0x139 /* closed caption control */ -#define denc0_trr 0x13A /* teletext request register */ -#define denc0_tosr 0x13B /* teletext odd field line se */ -#define denc0_tesr 0x13C /* teletext even field line s */ -#define denc0_rlsr 0x13D /* RGB rhift left register */ -#define denc0_vlsr 0x13E /* video level shift register */ -#define denc0_vsr 0x13F /* video scaling register */ - -/*----------------------------------------------------------------------------+ -| Video decoder. Suspect 0x179, 0x169, 0x16a, 0x152 (rc). -+----------------------------------------------------------------------------*/ -#define vid0_ccntl 0x140 /* control decoder operation */ -#define vid0_cmode 0x141 /* video operational mode */ -#define vid0_sstc0 0x142 /* STC high order bits 31:0 */ -#define vid0_sstc1 0x143 /* STC low order bit 32 */ -#define vid0_spts0 0x144 /* PTS high order bits 31:0 */ -#define vid0_spts1 0x145 /* PTS low order bit 32 */ -#define vid0_fifo 0x146 /* FIFO data port */ -#define vid0_fifos 0x147 /* FIFO status */ -#define vid0_cmd 0x148 /* send command to decoder */ -#define vid0_cmdd 0x149 /* port for command params */ -#define vid0_cmdst 0x14A /* command status */ -#define vid0_cmdad 0x14B /* command address */ -#define vid0_procia 0x14C /* instruction store */ -#define vid0_procid 0x14D /* data port for I_Store */ -#define vid0_osdm 0x151 /* OSD mode control */ -#define vid0_hosti 0x152 /* base interrupt register */ -#define vid0_mask 0x153 /* interrupt mask register */ -#define vid0_dispm 0x154 /* operational mode for Disp */ -#define vid0_dispd 0x155 /* setting for 'Sync' delay */ -#define vid0_vbctl 0x156 /* VBI */ -#define vid0_ttxctl 0x157 /* teletext control */ -#define vid0_disptb 0x158 /* display left/top border */ -#define vid0_osdgla 0x159 /* Graphics plane link addr */ -#define vid0_osdila 0x15A /* Image plane link addr */ -#define vid0_rbthr 0x15B /* rate buffer threshold */ -#define vid0_osdcla 0x15C /* Cursor link addr */ -#define vid0_stcca 0x15D /* STC common address */ -#define vid0_ptsctl 0x15F /* PTS Control */ -#define vid0_wprot 0x165 /* write protect for I_Store */ -#define vid0_vcqa 0x167 /* video clip queued block Ad */ -#define vid0_vcql 0x168 /* video clip queued block Le */ -#define vid0_blksz 0x169 /* block size bytes for copy op */ -#define vid0_srcad 0x16a /* copy source address bits 6-31 */ -#define vid0_udbas 0x16B /* base mem add for user data */ -#define vid0_vbibas 0x16C /* base mem add for VBI 0/1 */ -#define vid0_osdibas 0x16D /* Image plane base address */ -#define vid0_osdgbas 0x16E /* Graphic plane base address */ -#define vid0_rbbase 0x16F /* base mem add for video buf */ -#define vid0_dramad 0x170 /* DRAM address */ -#define vid0_dramdt 0x171 /* data port for DRAM access */ -#define vid0_dramcs 0x172 /* DRAM command and statusa */ -#define vid0_vcwa 0x173 /* v clip work address */ -#define vid0_vcwl 0x174 /* v clip work length */ -#define vid0_mseg0 0x175 /* segment address 0 */ -#define vid0_mseg1 0x176 /* segment address 1 */ -#define vid0_mseg2 0x177 /* segment address 2 */ -#define vid0_mseg3 0x178 /* segment address 3 */ -#define vid0_fbbase 0x179 /* frame buffer base memory */ -#define vid0_osdcbas 0x17A /* Cursor base addr */ -#define vid0_lboxtb 0x17B /* top left border */ -#define vid0_trdly 0x17C /* transparency gate delay */ -#define vid0_sbord 0x17D /* left/top small pict. bord. */ -#define vid0_zoffs 0x17E /* hor/ver zoom window */ -#define vid0_rbsz 0x17F /* rate buffer size read */ - -/*----------------------------------------------------------------------------+ -| Transport demultiplexer. -+----------------------------------------------------------------------------*/ -#define xpt0_lr 0x180 /* demux location register */ -#define xpt0_data 0x181 /* demux data register */ -#define xpt0_ir 0x182 /* demux interrupt register */ - -#define xpt0_config1 0x0000 /* configuration 1 */ -#define xpt0_control1 0x0001 /* control 1 */ -#define xpt0_festat 0x0002 /* Front-end status */ -#define xpt0_feimask 0x0003 /* Front_end interrupt Mask */ -#define xpt0_ocmcnfg 0x0004 /* OCM Address */ -#define xpt0_settapi 0x0005 /* Set TAP Interrupt */ - -#define xpt0_pcrhi 0x0010 /* PCR High */ -#define xpt0_pcrlow 0x0011 /* PCR Low */ -#define xpt0_lstchi 0x0012 /* Latched STC High */ -#define xpt0_lstclow 0x0013 /* Latched STC Low */ -#define xpt0_stchi 0x0014 /* STC High */ -#define xpt0_stclow 0x0015 /* STC Low */ -#define xpt0_pwm 0x0016 /* PWM */ -#define xpt0_pcrstct 0x0017 /* PCR-STC Threshold */ -#define xpt0_pcrstcd 0x0018 /* PCR-STC Delta */ -#define xpt0_stccomp 0x0019 /* STC Compare */ -#define xpt0_stccmpd 0x001a /* STC Compare Disarm */ - -#define xpt0_dsstat 0x0048 /* Descrambler Status */ -#define xpt0_dsimask 0x0049 /* Descrambler Interrupt Mask */ - -#define xpt0_vcchng 0x01f0 /* Video Channel Change */ -#define xpt0_acchng 0x01f1 /* Audio Channel Change */ -#define xpt0_axenable 0x01fe /* Aux PID Enables */ -#define xpt0_pcrpid 0x01ff /* PCR PID */ - -#define xpt0_config2 0x1000 /* Configuration 2 */ -#define xpt0_pbuflvl 0x1002 /* Packet Buffer Level */ -#define xpt0_intmask 0x1003 /* Interrupt Mask */ -#define xpt0_plbcnfg 0x1004 /* PLB Configuration */ - -#define xpt0_qint 0x1010 /* Queues Interrupts */ -#define xpt0_qintmsk 0x1011 /* Queues Interrupts Mask */ -#define xpt0_astatus 0x1012 /* Audio Status */ -#define xpt0_aintmask 0x1013 /* Audio Interrupt Mask */ -#define xpt0_vstatus 0x1014 /* Video Status */ -#define xpt0_vintmask 0x1015 /* Video Interrupt Mask */ - -#define xpt0_qbase 0x1020 /* Queue Base */ -#define xpt0_bucketq 0x1021 /* Bucket Queue */ -#define xpt0_qstops 0x1024 /* Queue Stops */ -#define xpt0_qresets 0x1025 /* Queue Resets */ -#define xpt0_sfchng 0x1026 /* Section Filter Change */ - -/*----------------------------------------------------------------------------+ -| Audio decoder. Suspect 0x1ad, 0x1b4, 0x1a3, 0x1a5 (read/write status) -+----------------------------------------------------------------------------*/ -#define aud0_ctrl0 0x1a0 /* control 0 */ -#define aud0_ctrl1 0x1a1 /* control 1 */ -#define aud0_ctrl2 0x1a2 /* control 2 */ -#define aud0_cmd 0x1a3 /* command register */ -#define aud0_isr 0x1a4 /* interrupt status register */ -#define aud0_imr 0x1a5 /* interrupt mask register */ -#define aud0_dsr 0x1a6 /* decoder status register */ -#define aud0_stc 0x1a7 /* system time clock */ -#define aud0_csr 0x1a8 /* channel status register */ -#define aud0_lcnt 0x1a9 /* queued address register 2 */ -#define aud0_pts 0x1aa /* presentation time stamp */ -#define aud0_tgctrl 0x1ab /* tone generation control */ -#define aud0_qlr2 0x1ac /* queued length register 2 */ -#define aud0_auxd 0x1ad /* aux data */ -#define aud0_strmid 0x1ae /* stream ID */ -#define aud0_qar 0x1af /* queued address register */ -#define aud0_dsps 0x1b0 /* DSP status */ -#define aud0_qlr 0x1b1 /* queued len address */ -#define aud0_dspc 0x1b2 /* DSP control */ -#define aud0_wlr2 0x1b3 /* working length register 2 */ -#define aud0_instd 0x1b4 /* instruction download */ -#define aud0_war 0x1b5 /* working address register */ -#define aud0_seg1 0x1b6 /* segment 1 base register */ -#define aud0_seg2 0x1b7 /* segment 2 base register */ -#define aud0_avf 0x1b9 /* audio att value front */ -#define aud0_avr 0x1ba /* audio att value rear */ -#define aud0_avc 0x1bb /* audio att value center */ -#define aud0_seg3 0x1bc /* segment 3 base register */ -#define aud0_offset 0x1bd /* offset address */ -#define aud0_wrl 0x1be /* working length register */ -#define aud0_war2 0x1bf /* working address register 2 */ - -/*----------------------------------------------------------------------------+ -| High speed memory controller 0 and 1. -+----------------------------------------------------------------------------*/ -#define hsmc0_gr 0x1e0 /* HSMC global register */ -#define hsmc0_besr 0x1e1 /* bus error status register */ -#define hsmc0_bear 0x1e2 /* bus error address register */ -#define hsmc0_br0 0x1e4 /* SDRAM sub-ctrl bank reg 0 */ -#define hsmc0_cr0 0x1e5 /* SDRAM sub-ctrl ctrl reg 0 */ -#define hsmc0_br1 0x1e7 /* SDRAM sub-ctrl bank reg 1 */ -#define hsmc0_cr1 0x1e8 /* SDRAM sub-ctrl ctrl reg 1 */ -#define hsmc0_sysr 0x1f1 /* system register */ -#define hsmc0_data 0x1f2 /* data register */ -#define hsmc0_crr 0x1f3 /* refresh register */ - -#define hsmc1_gr 0x1c0 /* HSMC global register */ -#define hsmc1_besr 0x1c1 /* bus error status register */ -#define hsmc1_bear 0x1c2 /* bus error address register */ -#define hsmc1_br0 0x1c4 /* SDRAM sub-ctrl bank reg 0 */ -#define hsmc1_cr0 0x1c5 /* SDRAM sub-ctrl ctrl reg 0 */ -#define hsmc1_br1 0x1c7 /* SDRAM sub-ctrl bank reg 1 */ -#define hsmc1_cr1 0x1c8 /* SDRAM sub-ctrl ctrl reg 1 */ -#define hsmc1_sysr 0x1d1 /* system register */ -#define hsmc1_data 0x1d2 /* data register */ -#define hsmc1_crr 0x1d3 /* refresh register */ - -/*----------------------------------------------------------------------------+ -| Machine State Register bit definitions. -+----------------------------------------------------------------------------*/ -#define msr_ape 0x00100000 -#define msr_apa 0x00080000 -#define msr_we 0x00040000 -#define msr_ce 0x00020000 -#define msr_ile 0x00010000 -#define msr_ee 0x00008000 -#define msr_pr 0x00004000 -#define msr_me 0x00001000 -#define msr_de 0x00000200 -#define msr_ir 0x00000020 -#define msr_dr 0x00000010 -#define msr_le 0x00000001 - -/*----------------------------------------------------------------------------+ -| Used during interrupt processing. -+----------------------------------------------------------------------------*/ -#define stack_reg_image_size 160 - -/*----------------------------------------------------------------------------+ -| Function prolog definition and other Metaware (EABI) defines. -+----------------------------------------------------------------------------*/ -#ifdef MW - -#define r0 0 -#define r1 1 -#define r2 2 -#define r3 3 -#define r4 4 -#define r5 5 -#define r6 6 -#define r7 7 -#define r8 8 -#define r9 9 -#define r10 10 -#define r11 11 -#define r12 12 -#define r13 13 -#define r14 14 -#define r15 15 -#define r16 16 -#define r17 17 -#define r18 18 -#define r19 19 -#define r20 20 -#define r21 21 -#define r22 22 -#define r23 23 -#define r24 24 -#define r25 25 -#define r26 26 -#define r27 27 -#define r28 28 -#define r29 29 -#define r30 30 -#define r31 31 - -#define cr0 0 -#define cr1 1 -#define cr2 2 -#define cr3 3 -#define cr4 4 -#define cr5 5 -#define cr6 6 -#define cr7 7 - -#define function_prolog(func_name) .text; \ - .align 2; \ - .globl func_name; \ - func_name: -#define function_epilog(func_name) .type func_name,@function; \ - .size func_name,.-func_name - -#define function_call(func_name) bl func_name - -#define stack_frame_min 8 -#define stack_frame_bc 0 -#define stack_frame_lr 4 -#define stack_neg_off 0 - -#endif - -/*----------------------------------------------------------------------------+ -| Function prolog definition and other DIAB (Elf) defines. -+----------------------------------------------------------------------------*/ -#ifdef ELF_DIAB - -fprolog: macro f_name - .text - .align 2 - .globl f_name -f_name: - endm - -fepilog: macro f_name - .type f_name,@function - .size f_name,.-f_name - endm - -#define function_prolog(func_name) fprolog func_name -#define function_epilog(func_name) fepilog func_name -#define function_call(func_name) bl func_name - -#define stack_frame_min 8 -#define stack_frame_bc 0 -#define stack_frame_lr 4 -#define stack_neg_off 0 - -#endif - -/*----------------------------------------------------------------------------+ -| Function prolog definition and other Xlc (XCOFF) defines. -+----------------------------------------------------------------------------*/ -#ifdef XCOFF - -.machine "403ga" - -#define r0 0 -#define r1 1 -#define r2 2 -#define r3 3 -#define r4 4 -#define r5 5 -#define r6 6 -#define r7 7 -#define r8 8 -#define r9 9 -#define r10 10 -#define r11 11 -#define r12 12 -#define r13 13 -#define r14 14 -#define r15 15 -#define r16 16 -#define r17 17 -#define r18 18 -#define r19 19 -#define r20 20 -#define r21 21 -#define r22 22 -#define r23 23 -#define r24 24 -#define r25 25 -#define r26 26 -#define r27 27 -#define r28 28 -#define r29 29 -#define r30 30 -#define r31 31 - -#define cr0 0 -#define cr1 1 -#define cr2 2 -#define cr3 3 -#define cr4 4 -#define cr5 5 -#define cr6 6 -#define cr7 7 - -#define function_prolog(func_name) .csect .func_name[PR]; \ - .globl .func_name[PR]; \ - func_name: - -#define function_epilog(func_name) .toc; \ - .csect func_name[DS]; \ - .globl func_name[DS]; \ - .long .func_name[PR]; \ - .long TOC[tc0] - -#define function_call(func_name) .extern .func_name[PR]; \ - stw r2,stack_frame_toc(r1); \ - mfspr r2,sprg0; \ - bl .func_name[PR]; \ - lwz r2,stack_frame_toc(r1) - -#define stack_frame_min 56 -#define stack_frame_bc 0 -#define stack_frame_lr 8 -#define stack_frame_toc 20 -#define stack_neg_off 276 - -#endif -#define function_prolog(func_name) .text; \ - .align 2; \ - .globl func_name; \ - func_name: -#define function_epilog(func_name) .type func_name,@function; \ - .size func_name,.-func_name - -#define function_call(func_name) bl func_name - -/*----------------------------------------------------------------------------+ -| Function prolog definition for GNU -+----------------------------------------------------------------------------*/ -#ifdef _GNU_TOOL - -#define function_prolog(func_name) .globl func_name; \ - func_name: -#define function_epilog(func_name) - -#endif diff --git a/arch/ppc/boot/simple/rw4/rw4_init.S b/arch/ppc/boot/simple/rw4/rw4_init.S deleted file mode 100644 index b1061962e46..00000000000 --- a/arch/ppc/boot/simple/rw4/rw4_init.S +++ /dev/null @@ -1,78 +0,0 @@ -#define VESTA -#include "ppc_40x.h" -# - .align 2 - .text -# -# added by linguohui - .extern initb_ebiu0, initb_config, hdw_init_finish - .extern initb_hsmc0, initb_hsmc1, initb_cache -# end added - .globl HdwInit -# -HdwInit: -# -#-----------------------------------------------------------------------* -# If we are not executing from the FLASH get out * -#-----------------------------------------------------------------------* -# SAW keep this or comment out a la Hawthorne? -# r3 contains NIP when used with Linux -# rlwinm r28, r3, 8, 24, 31 # if MSB == 0xFF -> FLASH address -# cmpwi r28, 0xff -# bne locn01 -# -# -#------------------------------------------------------------------------ -# Init_cpu. Bank registers are setup for the IBM STB. -#------------------------------------------------------------------------ -# -# Setup processor core clock to be driven off chip. This is GPI4 bit -# twenty. Setup Open Drain, Output Select, Three-State Control, and -# Three-State Select registers. -# - - - pb0pesr = 0x054 - pb0pear = 0x056 - - mflr r30 - -#----------------------------------------------------------------------------- -# Vectors will be at 0x1F000000 -# Dummy Machine check handler just does RFI before true handler gets installed -#----------------------------------------------------------------------------- -#if 1 /* xuwentao added*/ -#ifdef SDRAM16MB - lis r10,0x0000 - addi r10,r10,0x0000 -#else - lis r10,0x1F00 - addi r10,r10,0x0000 -#endif - - mtspr evpr,r10 #EVPR: 0x0 or 0x1f000000 depending - isync # on SDRAM memory model used. - - lis r10,0xFFFF # clear PB0_PESR because some - ori r10,r10,0xFFFF # transitions from flash,changed by linguohui - mtdcr pb0pesr,r10 # to load RAM image via RiscWatch - lis r10,0x0000 # cause PB0_PESR machine checks - mtdcr pb0pear,r10 - addis r10,r10,0x0000 # clear the - mtxer r10 # XER just in case... -#endif /* xuwentao*/ - - bl initb_ebiu0 # init EBIU - - bl initb_config # config PPC and board - - - - -#------------------------------------------------------------------------ -# EVPR setup moved to top of this function. -#------------------------------------------------------------------------ -# - mtlr r30 - blr - .end diff --git a/arch/ppc/boot/simple/rw4/rw4_init_brd.S b/arch/ppc/boot/simple/rw4/rw4_init_brd.S deleted file mode 100644 index 386afdaad6c..00000000000 --- a/arch/ppc/boot/simple/rw4/rw4_init_brd.S +++ /dev/null @@ -1,1125 +0,0 @@ -/*----------------------------------------------------------------------------+ -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1997 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ -| Author: Tony J. Cerreto -| Component: BSPS -| File: init_brd.s -| Purpose: Vesta Evaluation Board initialization subroutines. The following -| routines are available: -| 1. INITB_EBIU0: Initialize EBIU0. -| 2. INITB_CONFIG: Configure board. -| 3. INITB_HSMC0: Initialize HSMC0 (SDRAM). -| 4. INITB_HSMC1: Initialize HSMC1 (SDRAM). -| 5. INITB_CACHE: Initialize Data and Instruction Cache. -| 6. INITB_DCACHE: Initialize Data Cache. -| 7. INITB_ICACHE: Initialize Instruction Cache. -| 8. INITB_GET_CSPD: Get CPU Speed (Bus Speed and Processor Speed) -| -| Changes: -| Date: Author Comment: -| --------- ------ -------- -| 01-Mar-00 tjc Created -| 04-Mar-00 jfh Modified CIC_SEL3_VAL to support 1284 (Mux3 & GPIO 21-28) -| 04-Mar-00 jfh Modified XILINIX Reg 0 to support 1284 (Mux3 & GPIO 21-28) -| 04-Mar-00 jfh Modified XILINIX Reg 1 to support 1284 (Mux3 & GPIO 21-28) -| 04-Mar-00 jfh Modified XILINIX Reg 4 to support 1284 (Mux3 & GPIO 21-28) -| 19-May-00 rlb Relcoated HSMC0 to 0x1F000000 to support 32MB of contiguous -| SDRAM space. Changed cache ctl regs to reflect this. -| 22-May-00 tjc Changed initb_get_cspd interface and eliminated -| initb_get_bspd routines. -| 26-May-00 tjc Added two nop instructions after all mtxxx/mfxxx -| instructions due to PPC405 bug. -+----------------------------------------------------------------------------*/ -#define VESTA -#include "ppc_40x.h" -#include "stb.h" - -/*----------------------------------------------------------------------------+ -| BOARD CONFIGURATION DEFINES -+----------------------------------------------------------------------------*/ -#define CBS0_CR_VAL 0x00000002 /* CBS control reg value */ -#define CIC0_CR_VAL 0xD0800448 /* CIC control reg value */ -#define CIC0_SEL3_VAL 0x11500000 /* CIC select 3 reg value */ -#define CIC0_VCR_VAL 0x00631700 /* CIC video cntl reg value */ - -/*----------------------------------------------------------------------------+ -| EBIU0 BANK REGISTERS DEFINES -+----------------------------------------------------------------------------*/ -#define EBIU0_BRCRH0_VAL 0x00000000 /* BR High 0 (Extension Reg)*/ -#define EBIU0_BRCRH1_VAL 0x00000000 /* BR High 1 (Extension Reg)*/ -#define EBIU0_BRCRH2_VAL 0x40000000 /* BR High 2 (Extension Reg)*/ -#define EBIU0_BRCRH3_VAL 0x40000000 /* BR High 3 (Extension Reg)*/ -#define EBIU0_BRCRH4_VAL 0x00000000 /* BR High 4 (Extension Reg)*/ -#define EBIU0_BRCRH5_VAL 0x00000000 /* BR High 5 (Extension Reg)*/ -#define EBIU0_BRCRH6_VAL 0x00000000 /* BR High 6 (Extension Reg)*/ -#define EBIU0_BRCRH7_VAL 0x40000000 /* BR High 7 (Extension Reg)*/ - -#define EBIU0_BRCR0_VAL 0xFC58BFFE /* BR 0: 16 bit Flash 4 MB */ -#define EBIU0_BRCR1_VAL 0xFF00BFFE /* BR 1: Ext Connector 1 MB */ -#if 1 -#define EBIU0_BRCR2_VAL 0x207CFFBE /* BR 2: Xilinx 8 MB */ - /* twt == 0x3f */ -#else -#define EBIU0_BRCR2_VAL 0x207CCFBE /* BR 2: Xilinx 8 MB */ - /* twt == 0x0f */ -#endif -#define EBIU0_BRCR3_VAL 0x407CBFBE /* BR 3: IDE Drive 8 MB */ -#define EBIU0_BRCR4_VAL 0xFF00BFFF /* BR 4: Disabled. 0 MB */ -#define EBIU0_BRCR5_VAL 0xFF00BFFF /* BR 5: Disabled. 0 MB */ -#define EBIU0_BRCR6_VAL 0xFF00BFFF /* BR 6: Disabled. 0 MB */ -#define EBIU0_BRCR7_VAL 0xCE3F0003 /* BR 7: Line Mode DMA 2 MB */ - -/*----------------------------------------------------------------------------+ -| GPIO DEFINES -+----------------------------------------------------------------------------*/ -#define STB_GPIO0_OUTPUT (STB_GPIO0_BASE_ADDRESS+ 0x00) -#define STB_GPIO0_TC (STB_GPIO0_BASE_ADDRESS+ 0x04) -#define STB_GPIO0_OS_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x08) -#define STB_GPIO0_OS_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x0C) -#define STB_GPIO0_TS_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x10) -#define STB_GPIO0_TS_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x14) -#define STB_GPIO0_OD (STB_GPIO0_BASE_ADDRESS+ 0x18) -#define STB_GPIO0_INPUT (STB_GPIO0_BASE_ADDRESS+ 0x1C) -#define STB_GPIO0_R1 (STB_GPIO0_BASE_ADDRESS+ 0x20) -#define STB_GPIO0_R2 (STB_GPIO0_BASE_ADDRESS+ 0x24) -#define STB_GPIO0_R3 (STB_GPIO0_BASE_ADDRESS+ 0x28) -#define STB_GPIO0_IS_1_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x30) -#define STB_GPIO0_IS_1_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x34) -#define STB_GPIO0_IS_2_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x38) -#define STB_GPIO0_IS_2_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x3C) -#define STB_GPIO0_IS_3_0_31 (STB_GPIO0_BASE_ADDRESS+ 0x40) -#define STB_GPIO0_IS_3_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x44) -#define STB_GPIO0_SS_1 (STB_GPIO0_BASE_ADDRESS+ 0x50) -#define STB_GPIO0_SS_2 (STB_GPIO0_BASE_ADDRESS+ 0x54) -#define STB_GPIO0_SS_3 (STB_GPIO0_BASE_ADDRESS+ 0x58) - -#define GPIO0_TC_VAL 0x0C020004 /* three-state control val */ -#define GPIO0_OS_0_31_VAL 0x51A00004 /* output select 0-31 val */ -#define GPIO0_OS_32_63_VAL 0x0000002F /* output select 32-63 val */ -#define GPIO0_TS_0_31_VAL 0x51A00000 /* three-state sel 0-31 val*/ -#define GPIO0_TS_32_63_VAL 0x0000000F /* three-state sel 32-63 val*/ -#define GPIO0_OD_VAL 0xC0000004 /* open drain val */ -#define GPIO0_IS_1_0_31_VAL 0x50000151 /* input select 1 0-31 val */ -#define GPIO0_IS_1_32_63_VAL 0x00000000 /* input select 1 32-63 val */ -#define GPIO0_IS_2_0_31_VAL 0x00000000 /* input select 2 0-31 val */ -#define GPIO0_IS_2_32_63_VAL 0x00000000 /* input select 2 32-63 val */ -#define GPIO0_IS_3_0_31_VAL 0x00000440 /* input select 3 0-31 val */ -#define GPIO0_IS_3_32_63_VAL 0x00000000 /* input select 3 32-63 val */ -#define GPIO0_SS_1_VAL 0x00000000 /* sync select 1 val */ -#define GPIO0_SS_2_VAL 0x00000000 /* sync select 2 val */ -#define GPIO0_SS_3_VAL 0x00000000 /* sync select 3 val */ - -/*----------------------------------------------------------------------------+ -| XILINX DEFINES -+----------------------------------------------------------------------------*/ -#define STB_XILINX_LED (STB_FPGA_BASE_ADDRESS+ 0x0100) -#define STB_XILINX1_REG0 (STB_FPGA_BASE_ADDRESS+ 0x40000) -#define STB_XILINX1_REG1 (STB_FPGA_BASE_ADDRESS+ 0x40002) -#define STB_XILINX1_REG2 (STB_FPGA_BASE_ADDRESS+ 0x40004) -#define STB_XILINX1_REG3 (STB_FPGA_BASE_ADDRESS+ 0x40006) -#define STB_XILINX1_REG4 (STB_FPGA_BASE_ADDRESS+ 0x40008) -#define STB_XILINX1_REG5 (STB_FPGA_BASE_ADDRESS+ 0x4000A) -#define STB_XILINX1_REG6 (STB_FPGA_BASE_ADDRESS+ 0x4000C) -#define STB_XILINX1_ID (STB_FPGA_BASE_ADDRESS+ 0x4000E) -#define STB_XILINX1_FLUSH (STB_FPGA_BASE_ADDRESS+ 0x4000E) -#define STB_XILINX2_REG0 (STB_FPGA_BASE_ADDRESS+ 0x80000) -#define STB_XILINX2_REG1 (STB_FPGA_BASE_ADDRESS+ 0x80002) -#define STB_XILINX2_REG2 (STB_FPGA_BASE_ADDRESS+ 0x80004) - -#define XILINX1_R0_VAL 0x2440 /* Xilinx 1 Register 0 Val */ -#define XILINX1_R1_VAL 0x0025 /* Xilinx 1 Register 1 Val */ -#define XILINX1_R2_VAL 0x0441 /* Xilinx 1 Register 2 Val */ -#define XILINX1_R3_VAL 0x0008 /* Xilinx 1 Register 3 Val */ -#define XILINX1_R4_VAL 0x0100 /* Xilinx 1 Register 4 Val */ -#define XILINX1_R5_VAL 0x6810 /* Xilinx 1 Register 5 Val */ -#define XILINX1_R6_VAL 0x0000 /* Xilinx 1 Register 6 Val */ -#if 0 -#define XILINX2_R0_VAL 0x0008 /* Xilinx 2 Register 0 Val */ -#define XILINX2_R1_VAL 0x0000 /* Xilinx 2 Register 1 Val */ -#else -#define XILINX2_R0_VAL 0x0018 /* disable IBM IrDA RxD */ -#define XILINX2_R1_VAL 0x0008 /* enable SICC MAX chip */ -#endif -#define XILINX2_R2_VAL 0x0000 /* Xilinx 2 Register 2 Val */ - -/*----------------------------------------------------------------------------+ -| HSMC BANK REGISTERS DEFINES -+----------------------------------------------------------------------------*/ -#ifdef SDRAM16MB -#define HSMC0_BR0_VAL 0x000D2D55 /* 0x1F000000-007FFFFF R/W */ -#define HSMC0_BR1_VAL 0x008D2D55 /* 0x1F800000-1FFFFFFF R/W */ -#else -#define HSMC0_BR0_VAL 0x1F0D2D55 /* 0x1F000000-007FFFFF R/W */ -#define HSMC0_BR1_VAL 0x1F8D2D55 /* 0x1F800000-1FFFFFFF R/W */ -#endif -#define HSMC1_BR0_VAL 0xA00D2D55 /* 0xA0000000-A07FFFFF R/W */ -#define HSMC1_BR1_VAL 0xA08D2D55 /* 0xA0800000-A0FFFFFF R/W */ - -/*----------------------------------------------------------------------------+ -| CACHE DEFINES -+----------------------------------------------------------------------------*/ -#define DCACHE_NLINES 128 /* no. D-cache lines */ -#define DCACHE_NBYTES 32 /* no. bytes/ D-cache line */ -#define ICACHE_NLINES 256 /* no. I-cache lines */ -#define ICACHE_NBYTES 32 /* no. bytes/ I-cache line */ -#ifdef SDRAM16MB -#define DCACHE_ENABLE 0x80000000 /* D-cache regions to enable*/ -#define ICACHE_ENABLE 0x80000001 /* I-cache regions to enable*/ -#else -#define DCACHE_ENABLE 0x18000000 /* D-cache regions to enable*/ -#define ICACHE_ENABLE 0x18000001 /* I-cache regions to enable*/ -#endif - -/*----------------------------------------------------------------------------+ -| CPU CORE SPEED CALCULATION DEFINES -+----------------------------------------------------------------------------*/ -#define GCS_LCNT 500000 /* CPU speed loop count */ -#define GCS_TROW_BYTES 8 /* no. bytes in table row */ -#define GCS_CTICK_TOL 100 /* allowable clock tick tol */ -#define GCS_NMULT 4 /* no. of core speed mults */ - - /*--------------------------------------------------------------------+ - | No. 13.5Mhz - | Clock Ticks - | based on a - | loop count Bus - | of 100,000 Speed - +--------------------------------------------------------------------*/ -gcs_lookup_table: - .int 50000, 54000000 /* 54.0 Mhz */ - .int 66667, 40500000 /* 40.5 Mhz */ - .int 54545, 49500000 /* 49.5 Mhz */ - .int 46154, 58500000 /* 58.5 Mhz */ - .int 0, 0 /* end of table flag */ - - -/*****************************************************************************+ -| XXXXXXX XXX XXX XXXXXX XXXXXXX XXXXXX XX XX XX XXXX -| XX X XX XX X XX X XX X XX XX XXX XX XXXX XX -| XX X XXX XX XX X XX XX XXXX XX XX XX XX -| XXXX X XX XXXX XXXXX XX XXXX XX XX XX -| XX X XXX XX XX X XX XX XX XXX XXXXXX XX -| XX X XX XX XX XX X XX XX XX XX XX XX XX XX -| XXXXXXX XXX XXX XXXX XXXXXXX XXX XX XX XX XX XX XXXXXXX -+*****************************************************************************/ -/****************************************************************************** -| -| Routine: INITB_EBIU0. -| -| Purpose: Initialize all the EBIU0 Bank Registers -| Parameters: None. -| Returns: None. -| -******************************************************************************/ - function_prolog(initb_ebiu0) - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 0 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR0_VAL@h - ori r10,r10,EBIU0_BRCR0_VAL@l - mtdcr ebiu0_brcr0,r10 - lis r10,EBIU0_BRCRH0_VAL@h - ori r10,r10,EBIU0_BRCRH0_VAL@l - mtdcr ebiu0_brcrh0,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 1 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR1_VAL@h - ori r10,r10,EBIU0_BRCR1_VAL@l - mtdcr ebiu0_brcr1,r10 - lis r10,EBIU0_BRCRH1_VAL@h - ori r10,r10,EBIU0_BRCRH1_VAL@l - mtdcr ebiu0_brcrh1,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 2 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR2_VAL@h - ori r10,r10,EBIU0_BRCR2_VAL@l - mtdcr ebiu0_brcr2,r10 - lis r10,EBIU0_BRCRH2_VAL@h - ori r10,r10,EBIU0_BRCRH2_VAL@l - mtdcr ebiu0_brcrh2,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 3 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR3_VAL@h - ori r10,r10,EBIU0_BRCR3_VAL@l - mtdcr ebiu0_brcr3,r10 - lis r10,EBIU0_BRCRH3_VAL@h - ori r10,r10,EBIU0_BRCRH3_VAL@l - mtdcr ebiu0_brcrh3,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 4 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR4_VAL@h - ori r10,r10,EBIU0_BRCR4_VAL@l - mtdcr ebiu0_brcr4,r10 - lis r10,EBIU0_BRCRH4_VAL@h - ori r10,r10,EBIU0_BRCRH4_VAL@l - mtdcr ebiu0_brcrh4,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 5 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR5_VAL@h - ori r10,r10,EBIU0_BRCR5_VAL@l - mtdcr ebiu0_brcr5,r10 - lis r10,EBIU0_BRCRH5_VAL@h - ori r10,r10,EBIU0_BRCRH5_VAL@l - mtdcr ebiu0_brcrh5,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 6 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR6_VAL@h - ori r10,r10,EBIU0_BRCR6_VAL@l - mtdcr ebiu0_brcr6,r10 - lis r10,EBIU0_BRCRH6_VAL@h - ori r10,r10,EBIU0_BRCRH6_VAL@l - mtdcr ebiu0_brcrh6,r10 - - /*--------------------------------------------------------------------+ - | Set EBIU0 Bank 7 - +--------------------------------------------------------------------*/ - lis r10,EBIU0_BRCR7_VAL@h - ori r10,r10,EBIU0_BRCR7_VAL@l - mtdcr ebiu0_brcr7,r10 - lis r10,EBIU0_BRCRH7_VAL@h - ori r10,r10,EBIU0_BRCRH7_VAL@l - mtdcr ebiu0_brcrh7,r10 - - blr - function_epilog(initb_ebiu0) - - -/****************************************************************************** -| -| Routine: INITB_CONFIG -| -| Purpose: Configure the Vesta Evaluation Board. The following items -| will be configured: -| 1. Cross-Bar Switch. -| 2. Chip Interconnect. -| 3. Clear/reset key PPC registers. -| 4. Xilinx and GPIO Registers. -| -| Returns: None. -| -******************************************************************************/ - function_prolog(initb_config) - /*--------------------------------------------------------------------+ - | Init CROSS-BAR SWITCH - +--------------------------------------------------------------------*/ - lis r10,CBS0_CR_VAL@h /* r10 <- CBS Cntl Reg val */ - ori r10,r10,CBS0_CR_VAL@l - mtdcr cbs0_cr,r10 - - /*--------------------------------------------------------------------+ - | Init Chip-Interconnect (CIC) Registers - +--------------------------------------------------------------------*/ - lis r10,CIC0_CR_VAL@h /* r10 <- CIC Cntl Reg val */ - ori r10,r10,CIC0_CR_VAL@l - mtdcr cic0_cr,r10 - - lis r10,CIC0_SEL3_VAL@h /* r10 <- CIC SEL3 Reg val */ - ori r10,r10,CIC0_SEL3_VAL@l - mtdcr cic0_sel3,r10 - - lis r10,CIC0_VCR_VAL@h /* r10 <- CIC Vid C-Reg val */ - ori r10,r10,CIC0_VCR_VAL@l - mtdcr cic0_vcr,r10 - - /*--------------------------------------------------------------------+ - | Clear SGR and DCWR - +--------------------------------------------------------------------*/ - li r10,0x0000 - mtspr sgr,r10 - mtspr dcwr,r10 - - /*--------------------------------------------------------------------+ - | Clear/set up some machine state registers. - +--------------------------------------------------------------------*/ - li r10,0x0000 /* r10 <- 0 */ - mtdcr ebiu0_besr,r10 /* clr Bus Err Syndrome Reg */ - mtspr esr,r10 /* clr Exceptn Syndrome Reg */ - mttcr r10 /* timer control register */ - - mtdcr uic0_er,r10 /* disable all interrupts */ - - /* UIC_IIC0 | UIC_IIC1 | UIC_U0 | UIC_IR_RCV | UIC_IR_XMIT */ - lis r10, 0x00600e00@h - ori r10,r10,0x00600e00@l - mtdcr uic0_pr,r10 - - li r10,0x00000020 /* UIC_EIR1 */ - mtdcr uic0_tr,r10 - - lis r10,0xFFFF /* r10 <- 0xFFFFFFFF */ - ori r10,r10,0xFFFF /* */ - mtdbsr r10 /* clear/reset the dbsr */ - mtdcr uic0_sr,r10 /* clear pending interrupts */ - - li r10,0x1000 /* set Machine Exception bit*/ - oris r10,r10,0x2 /* set Criticl Exception bit*/ - mtmsr r10 /* change MSR */ - - /*--------------------------------------------------------------------+ - | Clear XER. - +--------------------------------------------------------------------*/ - li r10,0x0000 - mtxer r10 - - /*--------------------------------------------------------------------+ - | Init GPIO0 Registers - +--------------------------------------------------------------------*/ - lis r10, STB_GPIO0_TC@h /* Three-state control */ - ori r10,r10,STB_GPIO0_TC@l - lis r11, GPIO0_TC_VAL@h - ori r11,r11,GPIO0_TC_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_OS_0_31@h /* output select 0-31 */ - ori r10,r10,STB_GPIO0_OS_0_31@l - lis r11, GPIO0_OS_0_31_VAL@h - ori r11,r11,GPIO0_OS_0_31_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_OS_32_63@h /* output select 32-63 */ - ori r10,r10,STB_GPIO0_OS_32_63@l - lis r11, GPIO0_OS_32_63_VAL@h - ori r11,r11,GPIO0_OS_32_63_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_TS_0_31@h /* three-state select 0-31 */ - ori r10,r10,STB_GPIO0_TS_0_31@l - lis r11, GPIO0_TS_0_31_VAL@h - ori r11,r11,GPIO0_TS_0_31_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_TS_32_63@h /* three-state select 32-63 */ - ori r10,r10,STB_GPIO0_TS_32_63@l - lis r11, GPIO0_TS_32_63_VAL@h - ori r11,r11,GPIO0_TS_32_63_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_OD@h /* open drain */ - ori r10,r10,STB_GPIO0_OD@l - lis r11, GPIO0_OD_VAL@h - ori r11,r11,GPIO0_OD_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_IS_1_0_31@h /* input select 1, 0-31 */ - ori r10,r10,STB_GPIO0_IS_1_0_31@l - lis r11, GPIO0_IS_1_0_31_VAL@h - ori r11,r11,GPIO0_IS_1_0_31_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_IS_1_32_63@h /* input select 1, 32-63 */ - ori r10,r10,STB_GPIO0_IS_1_32_63@l - lis r11, GPIO0_IS_1_32_63_VAL@h - ori r11,r11,GPIO0_IS_1_32_63_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_IS_2_0_31@h /* input select 2, 0-31 */ - ori r10,r10,STB_GPIO0_IS_2_0_31@l - lis r11, GPIO0_IS_2_0_31_VAL@h - ori r11,r11,GPIO0_IS_2_0_31_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_IS_2_32_63@h /* input select 2, 32-63 */ - ori r10,r10,STB_GPIO0_IS_2_32_63@l - lis r11, GPIO0_IS_2_32_63_VAL@h - ori r11,r11,GPIO0_IS_2_32_63_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_IS_3_0_31@h /* input select 3, 0-31 */ - ori r10,r10,STB_GPIO0_IS_3_0_31@l - lis r11, GPIO0_IS_3_0_31_VAL@h - ori r11,r11,GPIO0_IS_3_0_31_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_IS_3_32_63@h /* input select 3, 32-63 */ - ori r10,r10,STB_GPIO0_IS_3_32_63@l - lis r11, GPIO0_IS_3_32_63_VAL@h - ori r11,r11,GPIO0_IS_3_32_63_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_SS_1@h /* sync select 1 */ - ori r10,r10,STB_GPIO0_SS_1@l - lis r11, GPIO0_SS_1_VAL@h - ori r11,r11,GPIO0_SS_1_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_SS_2@h /* sync select 2 */ - ori r10,r10,STB_GPIO0_SS_2@l - lis r11, GPIO0_SS_2_VAL@h - ori r11,r11,GPIO0_SS_2_VAL@l - stw r11,0(r10) - - lis r10, STB_GPIO0_SS_3@h /* sync select 3 */ - ori r10,r10,STB_GPIO0_SS_3@l - lis r11, GPIO0_SS_3_VAL@h - ori r11,r11,GPIO0_SS_3_VAL@l - stw r11,0(r10) - - /*--------------------------------------------------------------------+ - | Init Xilinx #1 Registers - +--------------------------------------------------------------------*/ - lis r10, STB_XILINX1_REG0@h /* init Xilinx1 Reg 0 */ - ori r10,r10,STB_XILINX1_REG0@l - li r11,XILINX1_R0_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_REG1@h /* init Xilinx1 Reg 1 */ - ori r10,r10,STB_XILINX1_REG1@l - li r11,XILINX1_R1_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_REG2@h /* init Xilinx1 Reg 2 */ - ori r10,r10,STB_XILINX1_REG2@l - li r11,XILINX1_R2_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_REG3@h /* init Xilinx1 Reg 3 */ - ori r10,r10,STB_XILINX1_REG3@l - li r11,XILINX1_R3_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_REG4@h /* init Xilinx1 Reg 4 */ - ori r10,r10,STB_XILINX1_REG4@l - li r11,XILINX1_R4_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_REG5@h /* init Xilinx1 Reg 5 */ - ori r10,r10,STB_XILINX1_REG5@l - li r11,XILINX1_R5_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_REG6@h /* init Xilinx1 Reg 6 */ - ori r10,r10,STB_XILINX1_REG6@l - li r11,XILINX1_R6_VAL - sth r11,0(r10) - - lis r10, STB_XILINX1_FLUSH@h /* latch registers in Xilinx*/ - ori r10,r10,STB_XILINX1_FLUSH@l - li r11,0x0000 - sth r11,0(r10) - - /*--------------------------------------------------------------------+ - | Init Xilinx #2 Registers - +--------------------------------------------------------------------*/ - lis r10, STB_XILINX2_REG0@h /* init Xilinx2 Reg 0 */ - ori r10,r10,STB_XILINX2_REG0@l - li r11,XILINX2_R0_VAL - sth r11,0(r10) - - lis r10, STB_XILINX2_REG1@h /* init Xilinx2 Reg 1 */ - ori r10,r10,STB_XILINX2_REG1@l - li r11,XILINX2_R1_VAL - sth r11,0(r10) - - lis r10, STB_XILINX2_REG2@h /* init Xilinx2 Reg 2 */ - ori r10,r10,STB_XILINX2_REG2@l - li r11,XILINX2_R2_VAL - sth r11,0(r10) - - blr - function_epilog(initb_config) - - -/****************************************************************************** -| -| Routine: INITB_HSMC0. -| -| Purpose: Initialize the HSMC0 Registers for SDRAM -| Parameters: None. -| Returns: R3 = 0: Successful -| = -1: Unsuccessful, SDRAM did not reset properly. -| -******************************************************************************/ - function_prolog(initb_hsmc0) - mflr r0 /* Save return addr */ - - /*--------------------------------------------------------------------+ - | Set Global SDRAM Controller to recommended default - +--------------------------------------------------------------------*/ - lis r10,0x6C00 - ori r10,r10,0x0000 - mtdcr hsmc0_gr,r10 - - /*--------------------------------------------------------------------+ - | Set HSMC0 Data Register to recommended default - +--------------------------------------------------------------------*/ - lis r10,0x0037 - ori r10,r10,0x0000 - mtdcr hsmc0_data,r10 - - /*--------------------------------------------------------------------+ - | Init HSMC0 Bank Register 0 - +--------------------------------------------------------------------*/ - lis r10,HSMC0_BR0_VAL@h - ori r10,r10,HSMC0_BR0_VAL@l - mtdcr hsmc0_br0,r10 - - /*--------------------------------------------------------------------+ - | Init HSMC0 Bank Register 1 - +--------------------------------------------------------------------*/ - lis r10,HSMC0_BR1_VAL@h - ori r10,r10,HSMC0_BR1_VAL@l - mtdcr hsmc0_br1,r10 - - /*--------------------------------------------------------------------+ - | Set HSMC0 Control Reg 0 - +--------------------------------------------------------------------*/ - lis r10,0x8077 /* PRECHARGE ALL DEVICE BKS */ - ori r10,r10,0x0000 - mtdcr hsmc0_cr0,r10 - li r3,0x0000 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne cr0,hsmc0_err - - lis r10,0x8078 /* AUTO-REFRESH */ - ori r10,r10,0x0000 - mtdcr hsmc0_cr0,r10 - li r3,0x0000 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne cr0,hsmc0_err - - lis r10,0x8070 /* PROG MODE W/DATA REG VAL */ - ori r10,r10,0x8000 - mtdcr hsmc0_cr0,r10 - li r3,0x0000 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne hsmc0_err - - /*--------------------------------------------------------------------+ - | Set HSMC0 Control Reg 1 - +--------------------------------------------------------------------*/ - lis r10,0x8077 /* PRECHARGE ALL DEVICE BKS */ - ori r10,r10,0x0000 - mtdcr hsmc0_cr1,r10 - li r3,0x0001 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne cr0,hsmc0_err - - lis r10,0x8078 /* AUTO-REFRESH */ - ori r10,r10,0x0000 - mtdcr hsmc0_cr1,r10 - li r3,0x0001 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne cr0,hsmc0_err - - lis r10,0x8070 /* PROG MODE W/DATA REG VAL */ - ori r10,r10,0x8000 - mtdcr hsmc0_cr1,r10 - li r3,0x0001 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne cr0,hsmc0_err - - /*--------------------------------------------------------------------+ - | Set HSMC0 Refresh Register - +--------------------------------------------------------------------*/ - lis r10,0x0FE1 - ori r10,r10,0x0000 - mtdcr hsmc0_crr,r10 - li r3,0 - -hsmc0_err: - mtlr r0 - blr - function_epilog(initb_hsmc0) - - -/****************************************************************************** -| -| Routine: INITB_HSMC1. -| -| Purpose: Initialize the HSMC1 Registers for SDRAM -| Parameters: None. -| Returns: R3 = 0: Successful -| = -1: Unsuccessful, SDRAM did not reset properly. -| -******************************************************************************/ - function_prolog(initb_hsmc1) - mflr r0 /* Save return addr */ - - /*--------------------------------------------------------------------+ - | Set Global SDRAM Controller to recommended default - +--------------------------------------------------------------------*/ - lis r10,0x6C00 - ori r10,r10,0x0000 - mtdcr hsmc1_gr,r10 - - /*--------------------------------------------------------------------+ - | Set HSMC1 Data Register to recommended default - +--------------------------------------------------------------------*/ - lis r10,0x0037 - ori r10,r10,0x0000 - mtdcr hsmc1_data,r10 - - /*--------------------------------------------------------------------+ - | Init HSMC1 Bank Register 0 - +--------------------------------------------------------------------*/ - lis r10,HSMC1_BR0_VAL@h - ori r10,r10,HSMC1_BR0_VAL@l - mtdcr hsmc1_br0,r10 - - /*--------------------------------------------------------------------+ - | Init HSMC1 Bank Register 1 - +--------------------------------------------------------------------*/ - lis r10,HSMC1_BR1_VAL@h - ori r10,r10,HSMC1_BR1_VAL@l - mtdcr hsmc1_br1,r10 - - /*--------------------------------------------------------------------+ - | Set HSMC1 Control Reg 0 - +--------------------------------------------------------------------*/ - lis r10,0x8077 /* PRECHARGE ALL DEVICE BANKS */ - ori r10,r10,0x0000 - mtdcr hsmc1_cr0,r10 - li r3,0x0002 - bl hsmc_cr_wait /* wait for operation completion */ - cmpwi cr0,r3,0x0000 - bne hsmc1_err - - lis r10,0x8078 /* AUTO-REFRESH */ - ori r10,r10,0x0000 - mtdcr hsmc1_cr0,r10 - li r3,0x0002 - bl hsmc_cr_wait /* wait for operation completion */ - cmpwi cr0,r3,0x0000 - bne hsmc1_err - - lis r10,0x8070 /* PROGRAM MODE W/DATA REG VALUE */ - ori r10,r10,0x8000 - mtdcr hsmc1_cr0,r10 - li r3,0x0002 - bl hsmc_cr_wait /* wait for operation completion */ - cmpwi cr0,r3,0x0000 - bne hsmc1_err - - /*--------------------------------------------------------------------+ - | Set HSMC1 Control Reg 1 - +--------------------------------------------------------------------*/ - lis r10,0x8077 /* PRECHARGE ALL DEVICE BKS */ - ori r10,r10,0x0000 - mtdcr hsmc1_cr1,r10 - li r3,0x0003 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne hsmc1_err - - lis r10,0x8078 /* AUTO-REFRESH */ - ori r10,r10,0x0000 - mtdcr hsmc1_cr1,r10 - li r3,0x0003 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne hsmc1_err - - lis r10,0x8070 /* PROG MODE W/DATA REG VAL */ - ori r10,r10,0x8000 - mtdcr hsmc1_cr1,r10 - li r3,0x0003 - bl hsmc_cr_wait /* wait for op completion */ - cmpwi cr0,r3,0x0000 - bne hsmc1_err - - /*--------------------------------------------------------------------+ - | Set HSMC1 Refresh Register - +--------------------------------------------------------------------*/ - lis r10,0x0FE1 - ori r10,r10,0x0000 - mtdcr hsmc1_crr,r10 - xor r3,r3,r3 - -hsmc1_err: - mtlr r0 - blr - function_epilog(initb_hsmc1) - - -/****************************************************************************** -| -| Routine: INITB_CACHE -| -| Purpose: This routine will enable Data and Instruction Cache. -| The Data Cache is an 8K two-way set associative and the -| Instruction Cache is an 16K two-way set associative cache. -| -| Parameters: None. -| -| Returns: None. -| -******************************************************************************/ - function_prolog(initb_cache) - mflr r0 /* Save return addr */ - - bl initb_Dcache /* enable D-Cache */ - bl initb_Icache /* enable I-Cache */ - - mtlr r0 - blr - function_epilog(initb_cache) - - -/****************************************************************************** -| -| Routine: INITB_DCACHE -| -| Purpose: This routine will invalidate all data in the Data Cache and -| then enable D-Cache. If cache is enabled already, the D-Cache -| will be flushed before the data is invalidated. -| -| Parameters: None. -| -| Returns: None. -| -******************************************************************************/ - function_prolog(initb_Dcache) - /*--------------------------------------------------------------------+ - | Flush Data Cache if enabled - +--------------------------------------------------------------------*/ - mfdccr r10 /* r10 <- DCCR */ - isync /* ensure prev insts done */ - cmpwi r10,0x00 - beq ic_dcinv /* D-cache off, invalidate */ - - /*--------------------------------------------------------------------+ - | Data Cache enabled, force known memory addresses to be Cached - +--------------------------------------------------------------------*/ - lis r10,HSMC0_BR0_VAL@h /* r10 <- first memory loc */ - andis. r10,r10,0xFFF0 - li r11,DCACHE_NLINES /* r11 <- # A-way addresses */ - addi r11,r11,DCACHE_NLINES /* r11 <- # B-way addresses */ - mtctr r11 /* set loop counter */ - -ic_dcload: - lwz r12,0(r10) /* force cache of address */ - addi r10,r10,DCACHE_NBYTES /* r10 <- next memory loc */ - bdnz ic_dcload - sync /* ensure prev insts done */ - isync - - /*--------------------------------------------------------------------+ - | Flush the known memory addresses from Cache - +--------------------------------------------------------------------*/ - lis r10,HSMC0_BR0_VAL@h /* r10 <- first memory loc */ - andis. r10,r10,0xFFF0 - mtctr r11 /* set loop counter */ - -ic_dcflush: - dcbf 0,r10 /* flush D-cache line */ - addi r10,r10,DCACHE_NBYTES /* r10 <- next memory loc */ - bdnz ic_dcflush - sync /* ensure prev insts done */ - isync - - /*--------------------------------------------------------------------+ - | Disable then invalidate Data Cache - +--------------------------------------------------------------------*/ - li r10,0 /* r10 <- 0 */ - mtdccr r10 /* disable the D-Cache */ - isync /* ensure prev insts done */ - -ic_dcinv: - li r10,0 /* r10 <- line address */ - li r11,DCACHE_NLINES /* r11 <- # lines in cache */ - mtctr r11 /* set loop counter */ - -ic_dcloop: - dccci 0,r10 /* invalidate A/B cache lns */ - addi r10,r10,DCACHE_NBYTES /* bump to next line */ - bdnz ic_dcloop - sync /* ensure prev insts done */ - isync - - /*--------------------------------------------------------------------+ - | Enable Data Cache - +--------------------------------------------------------------------*/ - lis r10,DCACHE_ENABLE@h /* r10 <- D-cache enable msk*/ - ori r10,r10,DCACHE_ENABLE@l - mtdccr r10 - sync /* ensure prev insts done */ - isync - - blr - function_epilog(initb_Dcache) - - -/****************************************************************************** -| -| Routine: INITB_ICACHE -| -| Purpose: This routine will invalidate all data in the Instruction -| Cache then enable I-Cache. -| -| Parameters: None. -| -| Returns: None. -| -******************************************************************************/ - function_prolog(initb_Icache) - /*--------------------------------------------------------------------+ - | Invalidate Instruction Cache - +--------------------------------------------------------------------*/ - li r10,0 /* r10 <- lines address */ - iccci 0,r10 /* invalidate all I-cache */ - sync /* ensure prev insts done */ - isync - - /*--------------------------------------------------------------------+ - | Enable Instruction Cache - +--------------------------------------------------------------------*/ - lis r10,ICACHE_ENABLE@h /* r10 <- I-cache enable msk*/ - ori r10,r10,ICACHE_ENABLE@l - mticcr r10 - sync /* ensure prev insts done */ - isync - - blr - function_epilog(initb_Icache) - -#if 0 -/****************************************************************************** -| -| Routine: INITB_GET_CSPD -| -| Purpose: Determine the CPU Core Speed. The 13.5 Mhz Time Base -| Counter (TBC) is used to measure a conditional branch -| instruction. -| -| Parameters: R3 = Address of Bus Speed -| R4 = Address of Core Speed -| -| Returns: (R3) = >0: Bus Speed. -| 0: Bus Speed not found in Look-Up Table. -| (R4) = >0: Core Speed. -| 0: Core Speed not found in Look-Up Table. -| -| Note: 1. This routine assumes the bdnz branch instruction takes -| two instruction cycles to complete. -| 2. This routine must be called before interrupts are enabled. -| -******************************************************************************/ - function_prolog(initb_get_cspd) - mflr r0 /* Save return address */ - /*--------------------------------------------------------------------+ - | Set-up timed loop - +--------------------------------------------------------------------*/ - lis r9,gcs_time_loop@h /* r9 <- addr loop instr */ - ori r9,r9,gcs_time_loop@l - lis r10,GCS_LCNT@h /* r10 <- loop count */ - ori r10,r10,GCS_LCNT@l - mtctr r10 /* ctr <- loop count */ - lis r11,STB_TIMERS_TBC@h /* r11 <- TBC register addr */ - ori r11,r11,STB_TIMERS_TBC@l - li r12,0 /* r12 <- 0 */ - - /*--------------------------------------------------------------------+ - | Cache timed-loop instruction - +--------------------------------------------------------------------*/ - icbt 0,r9 - sync - isync - - /*--------------------------------------------------------------------+ - | Get number of 13.5 Mhz cycles to execute time-loop - +--------------------------------------------------------------------*/ - stw r12,0(r11) /* reset TBC */ -gcs_time_loop: - bdnz+ gcs_time_loop /* force branch pred taken */ - lwz r5,0(r11) /* r5 <- num 13.5 Mhz ticks */ - li r6,5 /* LUT based on 1/5th the...*/ - divw r5,r5,r6 /*..loop count used */ - sync - isync - - /*--------------------------------------------------------------------+ - | Look-up core speed based on TBC value - +--------------------------------------------------------------------*/ - lis r6,gcs_lookup_table@h /* r6 <- pts at core spd LUT*/ - ori r6,r6,gcs_lookup_table@l - bl gcs_cspd_lookup /* find core speed in LUT */ - - mtlr r0 /* set return address */ - blr - function_epilog(initb_get_cspd) - -#endif -/*****************************************************************************+ -| XXXX XX XX XXXXXX XXXXXXX XXXXXX XX XX XX XXXX -| XX XXX XX X XX X XX X XX XX XXX XX XXXX XX -| XX XXXX XX XX XX X XX XX XXXX XX XX XX XX -| XX XX XXXX XX XXXX XXXXX XX XXXX XX XX XX -| XX XX XXX XX XX X XX XX XX XXX XXXXXX XX -| XX XX XX XX XX X XX XX XX XX XX XX XX XX -| XXXX XX XX XXXX XXXXXXX XXX XX XX XX XX XX XXXXXXX -+*****************************************************************************/ -/****************************************************************************** -| -| Routine: HSMC_CR_WAIT -| -| Purpose: Wait for the HSMC Control Register (bits 12-16) to be reset -| after an auto-refresh, pre-charge or program mode register -| command execution. -| -| Parameters: R3 = HSMC Control Register ID. -| 0: HSMC0 CR0 -| 1: HSMC0 CR1 -| 2: HSMC1 CR0 -| 3: HSMC1 CR1 -| -| Returns: R3 = 0: Successful -| -1: Unsuccessful -| -******************************************************************************/ -hsmc_cr_wait: - - li r11,10 /* r11 <- retry counter */ - mtctr r11 /* set retry counter */ - mr r11,r3 /* r11 <- HSMC CR reg id */ - -hsmc_cr_rep: - bdz hsmc_cr_err /* branch if max retries hit*/ - - /*--------------------------------------------------------------------+ - | GET HSMCx_CRx value based on HSMC Control Register ID - +--------------------------------------------------------------------*/ -try_hsmc0_cr0: /* CHECK IF ID=HSMC0 CR0 REG*/ - cmpwi cr0,r11,0x0000 - bne cr0,try_hsmc0_cr1 - mfdcr r10,hsmc0_cr0 /* r11 <- HSMC0 CR0 value */ - b hsmc_cr_read - -try_hsmc0_cr1: /* CHECK IF ID=HSMC0 CR1 REG*/ - cmpwi cr0,r11,0x0001 - bne cr0,try_hsmc1_cr0 - mfdcr r10,hsmc0_cr1 /* r10 <- HSMC0 CR1 value */ - b hsmc_cr_read - -try_hsmc1_cr0: /* CHECK IF ID=HSMC1 CR0 REG*/ - cmpwi cr0,r11,0x0002 - bne cr0,try_hsmc1_cr1 - mfdcr r10,hsmc1_cr0 /* r10 <- HSMC1 CR0 value */ - b hsmc_cr_read - -try_hsmc1_cr1: /* CHECK IF ID=HSMC1 CR1 REG*/ - cmpwi cr0,r11,0x0003 - bne cr0,hsmc_cr_err - mfdcr r10,hsmc1_cr1 /* r10 <- HSMC1 CR1 value */ - - /*--------------------------------------------------------------------+ - | Check if HSMC CR register was reset after command execution - +--------------------------------------------------------------------*/ -hsmc_cr_read: - lis r12,0x000F /* create "AND" mask */ - ori r12,r12,0x8000 - and. r10,r10,r12 /* r10 <- HSMC CR bits 12-16*/ - bne cr0,hsmc_cr_rep /* wait for bits to reset */ - li r3,0 /* set return code = success*/ - b hsmc_cr_done - -hsmc_cr_err: /* ERROR: SDRAM didn't reset*/ - li r3,-1 /* set RC=unsuccessful */ - -hsmc_cr_done: - blr - -#if 0 -/****************************************************************************** -| -| Routine: GCS_CSPD_LOOKUP -| -| Purpose: Uses the number of 13.5 Mhz clock ticks found after executing -| the branch instruction time loop to look-up the CPU Core Speed -| in the Core Speed Look-up Table. -| -| Parameters: R3 = Address of Bus Speed -| R4 = Address of Core Speed -| R5 = Number of 13.5 Mhz clock ticks found in time loop. -| R6 = Pointer to Core-Speed Look-Up Table -| -| Returns: (R3) = >0: Bus Speed. -| 0: Bus Speed not found in Look-Up Table. -| (R4) = >0: Core Speed. -| 0: Core Speed not found in Look-Up Table. -| -| Note: Core Speed = Bus Speed * Mult Factor (1-4x). -| -******************************************************************************/ -gcs_cspd_lookup: - - li r9,1 /* r9 <- core speed mult */ - /*--------------------------------------------------------------------+ - | Get theoritical number 13.5 Mhz ticks for a given Bus Speed from - | Look-up Table. Check all mult factors to determine if calculated - | value matches theoretical value (within a tolerance). - +--------------------------------------------------------------------*/ -gcs_cspd_loop: - lwz r10,0(r6) /* r10 <- no. ticks from LUT*/ - divw r10,r10,r9 /* r10 <- div mult (1-4x) */ - subi r11,r10,GCS_CTICK_TOL /* r11 <- no. tks low range */ - addi r12,r10,GCS_CTICK_TOL /* r12 <- no. tks high range*/ - - cmpw cr0,r5,r11 /* calc value within range? */ - blt gcs_cspd_retry /* less than low range */ - cmpw cr0,r5,r12 - bgt gcs_cspd_retry /* greater than high range */ - b gcs_cspd_fnd /* calc value within range */ - - /*--------------------------------------------------------------------+ - | SO FAR CORE SPEED NOT FOUND: Check next mult factor - +--------------------------------------------------------------------*/ -gcs_cspd_retry: - addi r9,r9,1 /* bump mult factor (1-4x) */ - cmpwi cr0,r9,GCS_NMULT - ble gcs_cspd_loop - - /*--------------------------------------------------------------------+ - | SO FAR CORE SPEED NOT FOUND: Point at next Bus Speed in LUT - +--------------------------------------------------------------------*/ - li r9,1 /* reset mult factor */ - addi r6,r6,GCS_TROW_BYTES /* point at next table entry*/ - lwz r10,0(r6) - cmpwi cr0,r10,0 /* check for EOT flag */ - bne gcs_cspd_loop - - /*--------------------------------------------------------------------+ - | COMPUTE CORE SPEED AND GET BUS SPEED FROM LOOK-UP TABLE - +--------------------------------------------------------------------*/ -gcs_cspd_fnd: - lwz r5,4(r6) /* r5 <- Bus Speed in LUT */ - mullw r6,r5,r9 /* r6 <- Core speed */ - stw r5,0(r3) /* (r3) <- Bus Speed */ - stw r6,0(r4) /* (r4) <- Core Speed */ - - blr -#endif diff --git a/arch/ppc/boot/simple/rw4/stb.h b/arch/ppc/boot/simple/rw4/stb.h deleted file mode 100644 index 9afa5ab24d2..00000000000 --- a/arch/ppc/boot/simple/rw4/stb.h +++ /dev/null @@ -1,239 +0,0 @@ -/*----------------------------------------------------------------------------+ -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ -| Author: Maciej P. Tyrlik -| Component: Include file. -| File: stb.h -| Purpose: Common Set-tob-box definitions. -| Changes: -| Date: Comment: -| ----- -------- -| 14-Jan-97 Created for ElPaso pass 1 MPT -| 13-May-97 Added function prototype and global variables MPT -| 08-Dec-98 Added RAW IR task information MPT -| 19-Jan-99 Port to Romeo MPT -| 19-May-00 Changed SDRAM to 32MB contiguous 0x1F000000 - 0x20FFFFFF RLB -+----------------------------------------------------------------------------*/ - -#ifndef _stb_h_ -#define _stb_h_ - -/*----------------------------------------------------------------------------+ -| Read/write from I/O macros. -+----------------------------------------------------------------------------*/ -#define inbyte(port) (*((unsigned char volatile *)(port))) -#define outbyte(port,data) *(unsigned char volatile *)(port)=\ - (unsigned char)(data) - -#define inshort(port) (*((unsigned short volatile *)(port))) -#define outshort(port,data) *(unsigned short volatile *)(port)=\ - (unsigned short)(data) - -#define inword(port) (*((unsigned long volatile *)(port))) -#define outword(port,data) *(unsigned long volatile *)(port)=\ - (unsigned long)(data) - -/*----------------------------------------------------------------------------+ -| STB interrupts. -+----------------------------------------------------------------------------*/ -#define STB_XP_TP_INT 0 -#define STB_XP_APP_INT 1 -#define STB_AUD_INT 2 -#define STB_VID_INT 3 -#define STB_DMA0_INT 4 -#define STB_DMA1_INT 5 -#define STB_DMA2_INT 6 -#define STB_DMA3_INT 7 -#define STB_SCI_INT 8 -#define STB_I2C1_INT 9 -#define STB_I2C2_INT 10 -#define STB_GPT_PWM0 11 -#define STB_GPT_PWM1 12 -#define STB_SCP_INT 13 -#define STB_SSP_INT 14 -#define STB_GPT_PWM2 15 -#define STB_EXT5_INT 16 -#define STB_EXT6_INT 17 -#define STB_EXT7_INT 18 -#define STB_EXT8_INT 19 -#define STB_SCC_INT 20 -#define STB_SICC_RECV_INT 21 -#define STB_SICC_TRAN_INT 22 -#define STB_PPU_INT 23 -#define STB_DCRX_INT 24 -#define STB_EXT0_INT 25 -#define STB_EXT1_INT 26 -#define STB_EXT2_INT 27 -#define STB_EXT3_INT 28 -#define STB_EXT4_INT 29 -#define STB_REDWOOD_ENET_INT STB_EXT1_INT - -/*----------------------------------------------------------------------------+ -| STB tasks, task stack sizes, and task priorities. The actual task priority -| is 1 more than the specified number since priority 0 is reserved (system -| internally adds 1 to supplied priority number). -+----------------------------------------------------------------------------*/ -#define STB_IDLE_TASK_SS (5* 1024) -#define STB_IDLE_TASK_PRIO 0 -#define STB_LEDTEST_SS (2* 1024) -#define STB_LEDTEST_PRIO 0 -#define STB_CURSOR_TASK_SS (10* 1024) -#define STB_CURSOR_TASK_PRIO 7 -#define STB_MPEG_TASK_SS (10* 1024) -#define STB_MPEG_TASK_PRIO 9 -#define STB_DEMUX_TASK_SS (10* 1024) -#define STB_DEMUX_TASK_PRIO 20 -#define RAW_STB_IR_TASK_SS (10* 1024) -#define RAW_STB_IR_TASK_PRIO 20 - -#define STB_SERIAL_ER_TASK_SS (10* 1024) -#define STB_SERIAL_ER_TASK_PRIO 1 -#define STB_CA_TASK_SS (10* 1024) -#define STB_CA_TASK_PRIO 8 - -#define INIT_DEFAULT_VIDEO_SS (10* 1024) -#define INIT_DEFAULT_VIDEO_PRIO 8 -#define INIT_DEFAULT_SERVI_SS (10* 1024) -#define INIT_DEFAULT_SERVI_PRIO 8 -#define INIT_DEFAULT_POST_SS (10* 1024) -#define INIT_DEFAULT_POST_PRIO 8 -#define INIT_DEFAULT_INTER_SS (10* 1024) -#define INIT_DEFAULT_INTER_PRIO 8 -#define INIT_DEFAULT_BR_SS (10* 1024) -#define INIT_DEFAULT_BR_PRIO 8 -#define INITIAL_TASK_STACK_SIZE (32* 1024) - -#ifdef VESTA -/*----------------------------------------------------------------------------+ -| Vesta Overall Address Map (all addresses are double mapped, bit 0 of the -| address is not decoded. Numbers below are dependent on board configuration. -| FLASH, SDRAM, DRAM numbers can be affected by actual board setup. -| -| FFE0,0000 - FFFF,FFFF FLASH -| F200,0000 - F210,FFFF FPGA logic -| Ethernet = F200,0000 -| LED Display = F200,0100 -| Xilinx #1 Regs = F204,0000 -| Xilinx #2 Regs = F208,0000 -| Spare = F20C,0000 -| IDE CS0 = F210,0000 -| F410,0000 - F410,FFFF IDE CS1 -| C000,0000 - C7FF,FFFF OBP -| C000,0000 - C000,0014 SICC (16550 + infra red) -| C001,0000 - C001,0018 PPU (Parallel Port) -| C002,0000 - C002,001B SC0 (Smart Card 0) -| C003,0000 - C003,000F I2C0 -| C004,0000 - C004,0009 SCC (16550 UART) -| C005,0000 - C005,0124 GPT (Timers) -| C006,0000 - C006,0058 GPIO0 -| C007,0000 - C007,001b SC1 (Smart Card 1) -| C008,0000 - C008,FFFF Unused -| C009,0000 - C009,FFFF Unused -| C00A,0000 - C00A,FFFF Unused -| C00B,0000 - C00B,000F I2C1 -| C00C,0000 - C00C,0006 SCP -| C00D,0000 - C00D,0010 SSP -| A000,0000 - A0FF,FFFF SDRAM1 (16M) -| 0000,0000 - 00FF,FFFF SDRAM0 (16M) -+----------------------------------------------------------------------------*/ -#define STB_FLASH_BASE_ADDRESS 0xFFE00000 -#define STB_FPGA_BASE_ADDRESS 0xF2000000 -#define STB_SICC_BASE_ADDRESS 0xC0000000 -#define STB_PPU_BASE_ADDR 0xC0010000 -#define STB_SC0_BASE_ADDRESS 0xC0020000 -#define STB_I2C1_BASE_ADDRESS 0xC0030000 -#define STB_SCC_BASE_ADDRESS 0xC0040000 -#define STB_TIMERS_BASE_ADDRESS 0xC0050000 -#define STB_GPIO0_BASE_ADDRESS 0xC0060000 -#define STB_SC1_BASE_ADDRESS 0xC0070000 -#define STB_I2C2_BASE_ADDRESS 0xC00B0000 -#define STB_SCP_BASE_ADDRESS 0xC00C0000 -#define STB_SSP_BASE_ADDRESS 0xC00D0000 -/*----------------------------------------------------------------------------+ -|The following are used by the IBM RTOS SW. -|15-May-00 Changed these values to reflect movement of base addresses in -|order to support 32MB of contiguous SDRAM space. -|Points to the cacheable region since these values are used in IBM RTOS -|to establish the vector address. -+----------------------------------------------------------------------------*/ -#define STB_SDRAM1_BASE_ADDRESS 0x20000000 -#define STB_SDRAM1_SIZE 0x01000000 -#define STB_SDRAM0_BASE_ADDRESS 0x1F000000 -#define STB_SDRAM0_SIZE 0x01000000 - -#else -/*----------------------------------------------------------------------------+ -| ElPaso Overall Address Map (all addresses are double mapped, bit 0 of the -| address is not decoded. Numbers below are dependent on board configuration. -| FLASH, SDRAM, DRAM numbers can be affected by actual board setup. OPB -| devices are inside the ElPaso chip. -| FFE0,0000 - FFFF,FFFF FLASH -| F144,0000 - F104,FFFF FPGA logic -| F140,0000 - F100,0000 ethernet (through FPGA logic) -| C000,0000 - C7FF,FFFF OBP -| C000,0000 - C000,0014 SICC (16550+ infra red) -| C001,0000 - C001,0016 PPU (parallel port) -| C002,0000 - C002,001B SC (smart card) -| C003,0000 - C003,000F I2C 1 -| C004,0000 - C004,0009 SCC (16550 UART) -| C005,0000 - C005,0124 Timers -| C006,0000 - C006,0058 GPIO0 -| C007,0000 - C007,0058 GPIO1 -| C008,0000 - C008,0058 GPIO2 -| C009,0000 - C009,0058 GPIO3 -| C00A,0000 - C00A,0058 GPIO4 -| C00B,0000 - C00B,000F I2C 2 -| C00C,0000 - C00C,0006 SCP -| C00D,0000 - C00D,0006 SSP -| A000,0000 - A0FF,FFFF SDRAM 16M -| 0000,0000 - 00FF,FFFF DRAM 16M -+----------------------------------------------------------------------------*/ -#define STB_FLASH_BASE_ADDRESS 0xFFE00000 -#define STB_FPGA_BASE_ADDRESS 0xF1440000 -#define STB_ENET_BASE_ADDRESS 0xF1400000 -#define STB_SICC_BASE_ADDRESS 0xC0000000 -#define STB_PPU_BASE_ADDR 0xC0010000 -#define STB_SC_BASE_ADDRESS 0xC0020000 -#define STB_I2C1_BASE_ADDRESS 0xC0030000 -#define STB_SCC_BASE_ADDRESS 0xC0040000 -#define STB_TIMERS_BASE_ADDRESS 0xC0050000 -#define STB_GPIO0_BASE_ADDRESS 0xC0060000 -#define STB_GPIO1_BASE_ADDRESS 0xC0070000 -#define STB_GPIO2_BASE_ADDRESS 0xC0080000 -#define STB_GPIO3_BASE_ADDRESS 0xC0090000 -#define STB_GPIO4_BASE_ADDRESS 0xC00A0000 -#define STB_I2C2_BASE_ADDRESS 0xC00B0000 -#define STB_SCP_BASE_ADDRESS 0xC00C0000 -#define STB_SSP_BASE_ADDRESS 0xC00D0000 -#define STB_SDRAM_BASE_ADDRESS 0xA0000000 -#endif - -/*----------------------------------------------------------------------------+ -| Other common defines. -+----------------------------------------------------------------------------*/ -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - -#endif /* _stb_h_ */ diff --git a/arch/ppc/boot/simple/uartlite_tty.c b/arch/ppc/boot/simple/uartlite_tty.c deleted file mode 100644 index ca1743e3e91..00000000000 --- a/arch/ppc/boot/simple/uartlite_tty.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Xilinx UARTLITE bootloader driver - * - * Copyright (c) 2007 Secret Lab Technologies Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/types.h> -#include <asm/serial.h> -#include <asm/io.h> -#include <platforms/4xx/xparameters/xparameters.h> - -#define UARTLITE_BASEADDR ((void*)(XPAR_UARTLITE_0_BASEADDR)) - -unsigned long -serial_init(int chan, void *ignored) -{ - /* Clear the RX FIFO */ - out_be32(UARTLITE_BASEADDR + 0x0C, 0x2); - return 0; -} - -void -serial_putc(unsigned long com_port, unsigned char c) -{ - while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x08) != 0); /* spin */ - out_be32(UARTLITE_BASEADDR + 0x4, c); -} - -unsigned char -serial_getc(unsigned long com_port) -{ - while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) == 0); /* spin */ - return in_be32(UARTLITE_BASEADDR); -} - -int -serial_tstc(unsigned long com_port) -{ - return ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) != 0); -} diff --git a/arch/ppc/boot/utils/.gitignore b/arch/ppc/boot/utils/.gitignore deleted file mode 100644 index bbdfb3b9c53..00000000000 --- a/arch/ppc/boot/utils/.gitignore +++ /dev/null @@ -1,3 +0,0 @@ -mkprep -mkbugboot -mktree diff --git a/arch/ppc/boot/utils/elf.pl b/arch/ppc/boot/utils/elf.pl deleted file mode 100644 index d3e9d9d5b84..00000000000 --- a/arch/ppc/boot/utils/elf.pl +++ /dev/null @@ -1,33 +0,0 @@ -# -# ELF header field numbers -# - -$e_ident = 0; # Identification bytes / magic number -$e_type = 1; # ELF file type -$e_machine = 2; # Target machine type -$e_version = 3; # File version -$e_entry = 4; # Start address -$e_phoff = 5; # Program header file offset -$e_shoff = 6; # Section header file offset -$e_flags = 7; # File flags -$e_ehsize = 8; # Size of ELF header -$e_phentsize = 9; # Size of program header -$e_phnum = 10; # Number of program header entries -$e_shentsize = 11; # Size of section header -$e_shnum = 12; # Number of section header entries -$e_shstrndx = 13; # Section header table string index - -# -# Section header field numbers -# - -$sh_name = 0; # Section name -$sh_type = 1; # Section header type -$sh_flags = 2; # Section header flags -$sh_addr = 3; # Virtual address -$sh_offset = 4; # File offset -$sh_size = 5; # Section size -$sh_link = 6; # Miscellaneous info -$sh_info = 7; # More miscellaneous info -$sh_addralign = 8; # Memory alignment -$sh_entsize = 9; # Entry size if this is a table diff --git a/arch/ppc/boot/utils/mkbugboot.c b/arch/ppc/boot/utils/mkbugboot.c deleted file mode 100644 index 1640c4199ca..00000000000 --- a/arch/ppc/boot/utils/mkbugboot.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * Makes a Motorola PPCBUG ROM bootable image which can be flashed - * into one of the FLASH banks on a Motorola PowerPlus board. - * - * Author: Matt Porter <mporter@mvista.com> - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#define ELF_HEADER_SIZE 65536 - -#include <unistd.h> -#include <sys/stat.h> -#include <string.h> -#include <stdio.h> -#include <stdlib.h> -#include <errno.h> -#include <fcntl.h> -#include <netinet/in.h> -#ifdef __sun__ -#include <inttypes.h> -#else -#include <stdint.h> -#endif - -/* size of read buffer */ -#define SIZE 0x1000 - -/* PPCBUG ROM boot header */ -typedef struct bug_boot_header { - uint8_t magic_word[4]; /* "BOOT" */ - uint32_t entry_offset; /* Offset from top of header to code */ - uint32_t routine_length; /* Length of code */ - uint8_t routine_name[8]; /* Name of the boot code */ -} bug_boot_header_t; - -#define HEADER_SIZE sizeof(bug_boot_header_t) - -void update_checksum(void *buf, size_t size, uint16_t *sum) -{ - uint32_t csum = *sum; - - while (size) { - csum += *(uint16_t *)buf; - if (csum > 0xffff) - csum -= 0xffff; - buf = (uint16_t *)buf + 1; - size -= 2; - } - *sum = csum; -} - -uint32_t copy_image(int in_fd, int out_fd, uint16_t *sum) -{ - uint8_t buf[SIZE]; - int offset = 0; - int n; - uint32_t image_size = 0; - - lseek(in_fd, ELF_HEADER_SIZE, SEEK_SET); - - /* Copy an image while recording its size */ - while ( (n = read(in_fd, buf + offset, SIZE - offset)) > 0 ) { - n += offset; - offset = n & 1; - n -= offset; - image_size = image_size + n; - /* who's going to deal with short writes? */ - write(out_fd, buf, n); - update_checksum(buf, n, sum); - if (offset) - buf[0] = buf[n]; - } - - /* BUG romboot requires that our size is divisible by 2 */ - /* align image to 2 byte boundary */ - if (offset) { - image_size += 2; - buf[1] = '\0'; - write(out_fd, buf, 2); - update_checksum(buf, 2, sum); - } - return image_size; -} - -void write_bugboot_header(int out_fd, uint32_t boot_size, uint16_t *sum) -{ - static bug_boot_header_t bbh = { - .magic_word = "BOOT", - .routine_name = "LINUXROM" - }; - - /* Fill in the PPCBUG ROM boot header */ - bbh.entry_offset = htonl(HEADER_SIZE); /* Entry address */ - bbh.routine_length= htonl(HEADER_SIZE+boot_size+2); /* Routine length */ - - /* Output the header and bootloader to the file */ - write(out_fd, &bbh, sizeof(bug_boot_header_t)); - update_checksum(&bbh, sizeof(bug_boot_header_t), sum); -} - -int main(int argc, char *argv[]) -{ - int image_fd, bugboot_fd; - uint32_t kernel_size = 0; - uint16_t checksum = 0; - - if (argc != 3) { - fprintf(stderr, "usage: %s <kernel_image> <bugboot>\n",argv[0]); - exit(-1); - } - - /* Get file args */ - - /* kernel image file */ - if ((image_fd = open(argv[1] , 0)) < 0) - exit(-1); - - /* bugboot file */ - if (!strcmp(argv[2], "-")) - bugboot_fd = 1; /* stdout */ - else if ((bugboot_fd = creat(argv[2] , 0755)) < 0) - exit(-1); - - /* Set file position after ROM header block where zImage will be written */ - lseek(bugboot_fd, HEADER_SIZE, SEEK_SET); - - /* Copy kernel image into bugboot image */ - kernel_size = copy_image(image_fd, bugboot_fd, &checksum); - - /* Set file position to beginning where header/romboot will be written */ - lseek(bugboot_fd, 0, SEEK_SET); - - /* Write out BUG header/romboot */ - write_bugboot_header(bugboot_fd, kernel_size, &checksum); - - /* Write out the calculated checksum */ - lseek(bugboot_fd, 0, SEEK_END); - write(bugboot_fd, &checksum, 2); - - /* Close bugboot file */ - close(bugboot_fd); - return 0; -} diff --git a/arch/ppc/boot/utils/mkprep.c b/arch/ppc/boot/utils/mkprep.c deleted file mode 100644 index 192bb397126..00000000000 --- a/arch/ppc/boot/utils/mkprep.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * Makes a prep bootable image which can be dd'd onto - * a disk device to make a bootdisk. Will take - * as input a elf executable, strip off the header - * and write out a boot image as: - * 1) default - strips elf header - * suitable as a network boot image - * 2) -pbp - strips elf header and writes out prep boot partition image - * cat or dd onto disk for booting - * 3) -asm - strips elf header and writes out as asm data - * useful for generating data for a compressed image - * -- Cort - * - * Modified for x86 hosted builds by Matt Porter <porter@neta.com> - * Modified for Sparc hosted builds by Peter Wahl <PeterWahl@web.de> - */ - -#include <stdio.h> -#include <string.h> -#include <stdlib.h> - -/* size of read buffer */ -#define SIZE 0x1000 - -/* - * Partition table entry - * - from the PReP spec - */ -typedef struct partition_entry { - unsigned char boot_indicator; - unsigned char starting_head; - unsigned char starting_sector; - unsigned char starting_cylinder; - - unsigned char system_indicator; - unsigned char ending_head; - unsigned char ending_sector; - unsigned char ending_cylinder; - - unsigned char beginning_sector[4]; - unsigned char number_of_sectors[4]; -} partition_entry_t; - -#define BootActive 0x80 -#define SystemPrep 0x41 - -void copy_image(FILE *, FILE *); -void write_prep_partition(FILE *, FILE *); -void write_asm_data(FILE *, FILE *); - -unsigned int elfhdr_size = 65536; - -int main(int argc, char *argv[]) -{ - FILE *in, *out; - int argptr = 1; - int prep = 0; - int asmoutput = 0; - - if (argc < 3 || argc > 4) { - fprintf(stderr, "usage: %s [-pbp] [-asm] <boot-file> <image>\n", - argv[0]); - exit(-1); - } - -/* needs to handle args more elegantly -- but this is a small/simple program */ - - /* check for -pbp */ - if (!strcmp(argv[argptr], "-pbp")) { - prep = 1; - argptr++; - } - - /* check for -asm */ - if (!strcmp(argv[argptr], "-asm")) { - asmoutput = 1; - argptr++; - } - - /* input file */ - if (!strcmp(argv[argptr], "-")) - in = stdin; - else if (!(in = fopen(argv[argptr], "r"))) - exit(-1); - argptr++; - - /* output file */ - if (!strcmp(argv[argptr], "-")) - out = stdout; - else if (!(out = fopen(argv[argptr], "w"))) - exit(-1); - argptr++; - - /* skip elf header in input file */ - /*if ( !prep )*/ - fseek(in, elfhdr_size, SEEK_SET); - - /* write prep partition if necessary */ - if (prep) - write_prep_partition(in, out); - - /* write input image to bootimage */ - if (asmoutput) - write_asm_data(in, out); - else - copy_image(in, out); - - return 0; -} - -void store_le32(unsigned int v, unsigned char *p) -{ - p[0] = v; - p[1] = v >>= 8; - p[2] = v >>= 8; - p[3] = v >> 8; -} - -void write_prep_partition(FILE *in, FILE *out) -{ - unsigned char block[512]; - partition_entry_t pe; - unsigned char *entry = block; - unsigned char *length = block + 4; - long pos = ftell(in), size; - - if (fseek(in, 0, SEEK_END) < 0) { - fprintf(stderr,"info failed\n"); - exit(-1); - } - size = ftell(in); - if (fseek(in, pos, SEEK_SET) < 0) { - fprintf(stderr,"info failed\n"); - exit(-1); - } - - memset(block, '\0', sizeof(block)); - - /* set entry point and boot image size skipping over elf header */ - store_le32(0x400/*+65536*/, entry); - store_le32(size-elfhdr_size+0x400, length); - - /* sets magic number for msdos partition (used by linux) */ - block[510] = 0x55; - block[511] = 0xAA; - - /* - * Build a "PReP" partition table entry in the boot record - * - "PReP" may only look at the system_indicator - */ - pe.boot_indicator = BootActive; - pe.system_indicator = SystemPrep; - /* - * The first block of the diskette is used by this "boot record" which - * actually contains the partition table. (The first block of the - * partition contains the boot image, but I digress...) We'll set up - * one partition on the diskette and it shall contain the rest of the - * diskette. - */ - pe.starting_head = 0; /* zero-based */ - pe.starting_sector = 2; /* one-based */ - pe.starting_cylinder = 0; /* zero-based */ - pe.ending_head = 1; /* assumes two heads */ - pe.ending_sector = 18; /* assumes 18 sectors/track */ - pe.ending_cylinder = 79; /* assumes 80 cylinders/diskette */ - - /* - * The "PReP" software ignores the above fields and just looks at - * the next two. - * - size of the diskette is (assumed to be) - * (2 tracks/cylinder)(18 sectors/tracks)(80 cylinders/diskette) - * - unlike the above sector numbers, the beginning sector is zero-based! - */ -#if 0 - store_le32(1, pe.beginning_sector); -#else - /* This has to be 0 on the PowerStack? */ - store_le32(0, pe.beginning_sector); -#endif - - store_le32(2*18*80-1, pe.number_of_sectors); - - memcpy(&block[0x1BE], &pe, sizeof(pe)); - - fwrite(block, sizeof(block), 1, out); - fwrite(entry, 4, 1, out); - fwrite(length, 4, 1, out); - /* set file position to 2nd sector where image will be written */ - fseek( out, 0x400, SEEK_SET ); -} - - - -void copy_image(FILE *in, FILE *out) -{ - char buf[SIZE]; - int n; - - while ( (n = fread(buf, 1, SIZE, in)) > 0 ) - fwrite(buf, 1, n, out); -} - - -void -write_asm_data(FILE *in, FILE *out) -{ - int i, cnt, pos = 0; - unsigned int cksum = 0, val; - unsigned char *lp; - unsigned char buf[SIZE]; - size_t len; - - fputs("\t.data\n\t.globl input_data\ninput_data:\n", out); - while ((len = fread(buf, 1, sizeof(buf), in)) > 0) { - cnt = 0; - lp = buf; - /* Round up to longwords */ - while (len & 3) - buf[len++] = '\0'; - for (i = 0; i < len; i += 4) { - if (cnt == 0) - fputs("\t.long\t", out); - fprintf(out, "0x%02X%02X%02X%02X", - lp[0], lp[1], lp[2], lp[3]); - val = *(unsigned long *)lp; - cksum ^= val; - lp += 4; - if (++cnt == 4) { - cnt = 0; - fprintf(out, " # %x \n", pos+i-12); - } else { - fputs(",", out); - } - } - if (cnt) - fputs("0\n", out); - pos += len; - } - fprintf(out, "\t.globl input_len\ninput_len:\t.long\t0x%x\n", pos); - fprintf(stderr, "cksum = %x\n", cksum); -} diff --git a/arch/ppc/boot/utils/mktree.c b/arch/ppc/boot/utils/mktree.c deleted file mode 100644 index 2be22e28f2b..00000000000 --- a/arch/ppc/boot/utils/mktree.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * Makes a tree bootable image for IBM Evaluation boards. - * Basically, just take a zImage, skip the ELF header, and stuff - * a 32 byte header on the front. - * - * We use htonl, which is a network macro, to make sure we're doing - * The Right Thing on an LE machine. It's non-obvious, but it should - * work on anything BSD'ish. - */ - -#include <fcntl.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <sys/stat.h> -#include <unistd.h> -#include <netinet/in.h> -#ifdef __sun__ -#include <inttypes.h> -#else -#include <stdint.h> -#endif - -/* This gets tacked on the front of the image. There are also a few - * bytes allocated after the _start label used by the boot rom (see - * head.S for details). - */ -typedef struct boot_block { - uint32_t bb_magic; /* 0x0052504F */ - uint32_t bb_dest; /* Target address of the image */ - uint32_t bb_num_512blocks; /* Size, rounded-up, in 512 byte blks */ - uint32_t bb_debug_flag; /* Run debugger or image after load */ - uint32_t bb_entry_point; /* The image address to start */ - uint32_t bb_checksum; /* 32 bit checksum including header */ - uint32_t reserved[2]; -} boot_block_t; - -#define IMGBLK 512 -char tmpbuf[IMGBLK]; - -int main(int argc, char *argv[]) -{ - int in_fd, out_fd; - int nblks, i; - uint cksum, *cp; - struct stat st; - boot_block_t bt; - - if (argc < 3) { - fprintf(stderr, "usage: %s <zImage-file> <boot-image> [entry-point]\n",argv[0]); - exit(1); - } - - if (stat(argv[1], &st) < 0) { - perror("stat"); - exit(2); - } - - nblks = (st.st_size + IMGBLK) / IMGBLK; - - bt.bb_magic = htonl(0x0052504F); - - /* If we have the optional entry point parameter, use it */ - if (argc == 4) - bt.bb_dest = bt.bb_entry_point = htonl(strtoul(argv[3], NULL, 0)); - else - bt.bb_dest = bt.bb_entry_point = htonl(0x500000); - - /* We know these from the linker command. - * ...and then move it up into memory a little more so the - * relocation can happen. - */ - bt.bb_num_512blocks = htonl(nblks); - bt.bb_debug_flag = 0; - - bt.bb_checksum = 0; - - /* To be neat and tidy :-). - */ - bt.reserved[0] = 0; - bt.reserved[1] = 0; - - if ((in_fd = open(argv[1], O_RDONLY)) < 0) { - perror("zImage open"); - exit(3); - } - - if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) { - perror("bootfile open"); - exit(3); - } - - cksum = 0; - cp = (void *)&bt; - for (i=0; i<sizeof(bt)/sizeof(uint); i++) - cksum += *cp++; - - /* Assume zImage is an ELF file, and skip the 64K header. - */ - if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) { - fprintf(stderr, "%s is too small to be an ELF image\n", - argv[1]); - exit(4); - } - - if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) { - fprintf(stderr, "%s is not an ELF image\n", argv[1]); - exit(4); - } - - if (lseek(in_fd, (64 * 1024), SEEK_SET) < 0) { - fprintf(stderr, "%s failed to seek in ELF image\n", argv[1]); - exit(4); - } - - nblks -= (64 * 1024) / IMGBLK; - - /* And away we go...... - */ - if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) { - perror("boot-image write"); - exit(5); - } - - while (nblks-- > 0) { - if (read(in_fd, tmpbuf, IMGBLK) < 0) { - perror("zImage read"); - exit(5); - } - cp = (uint *)tmpbuf; - for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++) - cksum += *cp++; - if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) { - perror("boot-image write"); - exit(5); - } - } - - /* rewrite the header with the computed checksum. - */ - bt.bb_checksum = htonl(cksum); - if (lseek(out_fd, 0, SEEK_SET) < 0) { - perror("rewrite seek"); - exit(1); - } - if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) { - perror("boot-image rewrite"); - exit(1); - } - - exit(0); -} |