summaryrefslogtreecommitdiff
path: root/arch/powerpc/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot')
-rw-r--r--arch/powerpc/boot/dts/bsc9131rdb.dtsi2
-rw-r--r--arch/powerpc/boot/dts/fsl/p1010si-post.dtsi4
-rw-r--r--arch/powerpc/boot/dts/fsl/p1022si-post.dtsi6
-rw-r--r--arch/powerpc/boot/dts/fsl/p2041si-post.dtsi87
-rw-r--r--arch/powerpc/boot/dts/fsl/p3041si-post.dtsi87
-rw-r--r--arch/powerpc/boot/dts/fsl/p4080si-post.dtsi74
-rw-r--r--arch/powerpc/boot/dts/fsl/p5020si-post.dtsi92
-rw-r--r--arch/powerpc/boot/dts/fsl/p5040si-post.dtsi92
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi1
-rw-r--r--arch/powerpc/boot/dts/ppa8548.dts166
-rw-r--r--arch/powerpc/boot/dts/sbc8548-altflash.dts115
-rw-r--r--arch/powerpc/boot/dts/sbc8548-post.dtsi295
-rw-r--r--arch/powerpc/boot/dts/sbc8548-pre.dtsi52
-rw-r--r--arch/powerpc/boot/dts/sbc8548.dts356
14 files changed, 1035 insertions, 394 deletions
diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
index 638adda2c21..9e6c01339cc 100644
--- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
+++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
@@ -126,7 +126,7 @@
};
};
- sdhci@2e000 {
+ sdhc@2e000 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
index 0bde9ee8afa..af12ead88c5 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -41,7 +41,7 @@
/* controller at 0x9000 */
&pci0 {
- compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+ compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
@@ -69,7 +69,7 @@
/* controller at 0xa000 */
&pci1 {
- compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+ compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
index 06216b8c0af..e179803a81e 100644
--- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -45,7 +45,7 @@
/* controller at 0x9000 */
&pci0 {
- compatible = "fsl,p1022-pcie";
+ compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
@@ -73,7 +73,7 @@
/* controller at 0xa000 */
&pci1 {
- compatible = "fsl,p1022-pcie";
+ compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
@@ -102,7 +102,7 @@
/* controller at 0xb000 */
&pci2 {
- compatible = "fsl,p1022-pcie";
+ compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 531eab82c6c..69ac1acd434 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -48,6 +48,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -75,6 +77,8 @@
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -102,6 +106,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -125,18 +131,21 @@
interrupts = <16 2 1 11>;
#address-cells = <2>;
#size-cells = <2>;
+ fsl,iommu-parent = <&pamu0>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
+ fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
+ fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
};
};
@@ -246,10 +255,37 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
+ reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
+ ranges = <0 0x20000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupts = <
24 2 0 0
16 2 1 30>;
+
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu1: pamu@1000 {
+ reg = <0x1000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu2: pamu@2000 {
+ reg = <0x2000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu3: pamu@3000 {
+ reg = <0x3000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
};
/include/ "qoriq-mpic.dtsi"
@@ -291,7 +327,17 @@
};
/include/ "qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+ };
+
/include/ "qoriq-dma-1.dtsi"
+ dma@101300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
+
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
@@ -299,6 +345,8 @@
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
sdhci,auto-cmd12;
};
@@ -308,20 +356,37 @@
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
- usb0: usb@210000 {
- compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- phy_type = "utmi";
- port0;
- };
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ phy_type = "utmi";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+ port0;
+ };
/include/ "qoriq-usb2-dr-0.dtsi"
- usb1: usb@211000 {
- compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- dr_mode = "host";
- phy_type = "utmi";
- };
+ usb1: usb@211000 {
+ compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
/include/ "qoriq-sata2-0.dtsi"
+ sata@220000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+ };
+
/include/ "qoriq-sata2-1.dtsi"
+ sata@221000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+ };
+
/include/ "qoriq-sec4.2-0.dtsi"
+crypto: crypto@300000 {
+ fsl,iommu-parent = <&pamu1>;
+ };
};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index af4ebc8009e..9b5a81a4529 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -48,6 +48,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -75,6 +77,8 @@
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -102,6 +106,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -152,18 +158,21 @@
interrupts = <16 2 1 11>;
#address-cells = <2>;
#size-cells = <2>;
+ fsl,iommu-parent = <&pamu0>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
+ fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
+ fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
};
};
@@ -273,10 +282,37 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
+ reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
+ ranges = <0 0x20000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupts = <
24 2 0 0
16 2 1 30>;
+
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu1: pamu@1000 {
+ reg = <0x1000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu2: pamu@2000 {
+ reg = <0x2000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu3: pamu@3000 {
+ reg = <0x3000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
};
/include/ "qoriq-mpic.dtsi"
@@ -318,7 +354,17 @@
};
/include/ "qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+ };
+
/include/ "qoriq-dma-1.dtsi"
+ dma@101300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
+
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
@@ -326,6 +372,8 @@
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
sdhci,auto-cmd12;
};
@@ -335,20 +383,37 @@
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
- usb0: usb@210000 {
- compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
- phy_type = "utmi";
- port0;
- };
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
+ phy_type = "utmi";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+ port0;
+ };
/include/ "qoriq-usb2-dr-0.dtsi"
- usb1: usb@211000 {
- compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- dr_mode = "host";
- phy_type = "utmi";
- };
+ usb1: usb@211000 {
+ compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
/include/ "qoriq-sata2-0.dtsi"
+ sata@220000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+ };
+
/include/ "qoriq-sata2-1.dtsi"
+ sata@221000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+ };
+
/include/ "qoriq-sec4.2-0.dtsi"
+crypto: crypto@300000 {
+ fsl,iommu-parent = <&pamu1>;
+ };
};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index 4f9c9f682ec..19859ad851e 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -41,13 +41,15 @@
/* controller at 0x200000 */
&pci0 {
- compatible = "fsl,p4080-pcie";
+ compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -68,13 +70,15 @@
/* controller at 0x201000 */
&pci1 {
- compatible = "fsl,p4080-pcie";
+ compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -95,13 +99,15 @@
/* controller at 0x202000 */
&pci2 {
- compatible = "fsl,p4080-pcie";
+ compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -126,18 +132,21 @@
#address-cells = <2>;
#size-cells = <2>;
fsl,srio-rmu-handle = <&rmu>;
+ fsl,iommu-parent = <&pamu0>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
+ fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
+ fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
};
};
@@ -281,13 +290,51 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
+ reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */
+ ranges = <0 0x20000 0x5000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupts = <
24 2 0 0
16 2 1 30>;
+
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu1: pamu@1000 {
+ reg = <0x1000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu2: pamu@2000 {
+ reg = <0x2000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu3: pamu@3000 {
+ reg = <0x3000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu4: pamu@4000 {
+ reg = <0x4000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
};
/include/ "qoriq-rmu-0.dtsi"
+ rmu@d3000 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x540>; /* RMULIODNR */
+ };
+
/include/ "qoriq-mpic.dtsi"
guts: global-utilities@e0000 {
@@ -327,7 +374,17 @@
};
/include/ "qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+ };
+
/include/ "qoriq-dma-1.dtsi"
+ dma@101300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
+
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
@@ -335,6 +392,8 @@
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
voltage-ranges = <3300 3300>;
sdhci,auto-cmd12;
};
@@ -347,11 +406,18 @@
/include/ "qoriq-usb2-mph-0.dtsi"
usb@210000 {
compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb@211000 {
compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
};
/include/ "qoriq-sec4.0-0.dtsi"
+crypto: crypto@300000 {
+ fsl,iommu-parent = <&pamu1>;
+ };
};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index 5d7205b7bb0..9ea77c3513f 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -48,6 +48,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -75,6 +77,8 @@
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -102,6 +106,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -129,6 +135,8 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 12>;
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x50c>; /* PEX4LIODNR */
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -152,18 +160,21 @@
interrupts = <16 2 1 11>;
#address-cells = <2>;
#size-cells = <2>;
+ fsl,iommu-parent = <&pamu0>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
+ fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
+ fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
};
};
@@ -276,10 +287,37 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
+ reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
+ ranges = <0 0x20000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupts = <
24 2 0 0
16 2 1 30>;
+
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu1: pamu@1000 {
+ reg = <0x1000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu2: pamu@2000 {
+ reg = <0x2000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu3: pamu@3000 {
+ reg = <0x3000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
};
/include/ "qoriq-mpic.dtsi"
@@ -321,7 +359,17 @@
};
/include/ "qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+ };
+
/include/ "qoriq-dma-1.dtsi"
+ dma@101300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
+
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
@@ -329,6 +377,8 @@
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
sdhci,auto-cmd12;
};
@@ -338,21 +388,41 @@
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
- usb0: usb@210000 {
- compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- phy_type = "utmi";
- port0;
- };
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+ phy_type = "utmi";
+ port0;
+ };
/include/ "qoriq-usb2-dr-0.dtsi"
- usb1: usb@211000 {
- compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- dr_mode = "host";
- phy_type = "utmi";
- };
+ usb1: usb@211000 {
+ compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
/include/ "qoriq-sata2-0.dtsi"
+ sata@220000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+ };
+
/include/ "qoriq-sata2-1.dtsi"
+ sata@221000 {
+ fsl,iommu-parent = <&pamu1>;
+ fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+ };
/include/ "qoriq-sec4.2-0.dtsi"
+ crypto@300000 {
+ fsl,iommu-parent = <&pamu1>;
+ };
+
/include/ "qoriq-raid1.0-0.dtsi"
+ raideng@320000 {
+ fsl,iommu-parent = <&pamu1>;
+ };
};
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index db2c9a7b3a0..97f8c26f970 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -48,6 +48,7 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
+ fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -75,6 +76,7 @@
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
+ fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -102,6 +104,7 @@
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
+ fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
@@ -239,10 +242,42 @@
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
+ reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */
+ ranges = <0 0x20000 0x5000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <24 2 0 0
+ 16 2 1 30>;
+
+ pamu0: pamu@0 {
+ reg = <0 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu1: pamu@1000 {
+ reg = <0x1000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu2: pamu@2000 {
+ reg = <0x2000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu3: pamu@3000 {
+ reg = <0x3000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
+
+ pamu4: pamu@4000 {
+ reg = <0x4000 0x1000>;
+ fsl,primary-cache-geometry = <32 1>;
+ fsl,secondary-cache-geometry = <128 2>;
+ };
};
/include/ "qoriq-mpic.dtsi"
@@ -284,7 +319,17 @@
};
/include/ "qoriq-dma-0.dtsi"
+ dma@100300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+ };
+
/include/ "qoriq-dma-1.dtsi"
+ dma@101300 {
+ fsl,iommu-parent = <&pamu0>;
+ fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+ };
+
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
@@ -292,6 +337,8 @@
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
+ fsl,iommu-parent = <&pamu2>;
+ fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
sdhci,auto-cmd12;
};
@@ -301,20 +348,37 @@
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
- usb0: usb@210000 {
- compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- phy_type = "utmi";
- port0;
- };
+ usb0: usb@210000 {
+ compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ fsl,iommu-parent = <&pamu4>;
+ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+ phy_type = "utmi";
+ port0;
+ };
/include/ "qoriq-usb2-dr-0.dtsi"
- usb1: usb@211000 {
- compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- dr_mode = "host";
- phy_type = "utmi";
- };
+ usb1: usb@211000 {
+ compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ fsl,iommu-parent = <&pamu4>;
+ fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
/include/ "qoriq-sata2-0.dtsi"
+ sata@220000 {
+ fsl,iommu-parent = <&pamu4>;
+ fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+ };
+
/include/ "qoriq-sata2-1.dtsi"
+ sata@221000 {
+ fsl,iommu-parent = <&pamu4>;
+ fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+ };
+
/include/ "qoriq-sec5.2-0.dtsi"
+ crypto@300000 {
+ fsl,iommu-parent = <&pamu4>;
+ };
};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
index d4c9d5daab2..ffadcb563ad 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
@@ -36,6 +36,7 @@ crypto@30000 {
compatible = "fsl,sec-v4.4", "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0x0 0x30000 0x10000>;
reg = <0x30000 0x10000>;
interrupts = <58 2 0 0>;
diff --git a/arch/powerpc/boot/dts/ppa8548.dts b/arch/powerpc/boot/dts/ppa8548.dts
new file mode 100644
index 00000000000..f97eceed610
--- /dev/null
+++ b/arch/powerpc/boot/dts/ppa8548.dts
@@ -0,0 +1,166 @@
+/*
+ * PPA8548 Device Tree Source (36-bit address map)
+ * Copyright 2013 Prodrive B.V.
+ *
+ * Based on:
+ * MPC8548 CDS Device Tree Source (36-bit address map)
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/mpc8548si-pre.dtsi"
+
+/ {
+ model = "ppa8548";
+ compatible = "ppa8548";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0x0 0x40000000>;
+ };
+
+ lbc: localbus@fe0005000 {
+ reg = <0xf 0xe0005000 0 0x1000>;
+ ranges = <0x0 0x0 0xf 0xff800000 0x00800000>;
+ };
+
+ soc: soc8548@fe0000000 {
+ ranges = <0 0xf 0xe0000000 0x100000>;
+ };
+
+ pci0: pci@fe0008000 {
+ /* ppa8548 board doesn't support PCI */
+ status = "disabled";
+ };
+
+ pci1: pci@fe0009000 {
+ /* ppa8548 board doesn't support PCI */
+ status = "disabled";
+ };
+
+ pci2: pcie@fe000a000 {
+ /* ppa8548 board doesn't support PCI */
+ status = "disabled";
+ };
+
+ rio: rapidio@fe00c0000 {
+ reg = <0xf 0xe00c0000 0x0 0x11000>;
+ port1 {
+ ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>;
+ };
+ };
+};
+
+&lbc {
+ nor@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x00800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partition@0 {
+ reg = <0x0 0x7A0000>;
+ label = "user";
+ };
+
+ partition@7A0000 {
+ reg = <0x7A0000 0x20000>;
+ label = "env";
+ read-only;
+ };
+
+ partition@7C0000 {
+ reg = <0x7C0000 0x40000>;
+ label = "u-boot";
+ read-only;
+ };
+ };
+};
+
+&soc {
+ i2c@3000 {
+ rtc@6f {
+ compatible = "intersil,isl1208";
+ reg = <0x6f>;
+ };
+ };
+
+ i2c@3100 {
+ };
+
+ /*
+ * Only ethernet controller @25000 and @26000 are used.
+ * Use alias enet2 and enet3 for the remainig controllers,
+ * to stay compatible with mpc8548si-pre.dtsi.
+ */
+ enet2: ethernet@24000 {
+ status = "disabled";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <7 1 0 0>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <8 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet1: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy1>;
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet3: ethernet@27000 {
+ status = "disabled";
+ };
+
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ crypto@30000 {
+ status = "disabled";
+ };
+};
+
+/include/ "fsl/mpc8548si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/sbc8548-altflash.dts b/arch/powerpc/boot/dts/sbc8548-altflash.dts
new file mode 100644
index 00000000000..0b38a0defd2
--- /dev/null
+++ b/arch/powerpc/boot/dts/sbc8548-altflash.dts
@@ -0,0 +1,115 @@
+/*
+ * SBC8548 Device Tree Source
+ *
+ * Configured for booting off the alternate (64MB SODIMM) flash.
+ * Requires switching JP12 jumpers and changing SW2.8 setting.
+ *
+ * Copyright 2013 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/dts-v1/;
+
+/include/ "sbc8548-pre.dtsi"
+
+/{
+ localbus@e0000000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ reg = <0xe0000000 0x5000>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0x0 0x0 0xfc000000 0x04000000 /*64MB Flash*/
+ 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/
+ 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/
+ 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */
+ 0x6 0x0 0xef800000 0x00800000>; /*8MB Flash*/
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x0 0x04000000>;
+ compatible = "intel,JS28F128", "cfi-flash";
+ bank-width = <4>;
+ device-width = <1>;
+ partition@0x0 {
+ label = "space";
+ /* FC000000 -> FFEFFFFF */
+ reg = <0x00000000 0x03f00000>;
+ };
+ partition@0x03f00000 {
+ label = "bootloader";
+ /* FFF00000 -> FFFFFFFF */
+ reg = <0x03f00000 0x00100000>;
+ read-only;
+ };
+ };
+
+
+ epld@5,0 {
+ compatible = "wrs,epld-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x5 0x0 0x00b10000>;
+ ranges = <
+ 0x0 0x0 0x5 0x000000 0x1fff /* LED */
+ 0x1 0x0 0x5 0x100000 0x1fff /* Switches */
+ 0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */
+ 0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */
+ >;
+
+ led@0,0 {
+ compatible = "led";
+ reg = <0x0 0x0 0x1fff>;
+ };
+
+ switches@1,0 {
+ compatible = "switches";
+ reg = <0x1 0x0 0x1fff>;
+ };
+
+ hw-rev@3,0 {
+ compatible = "hw-rev";
+ reg = <0x3 0x0 0x1fff>;
+ };
+
+ eeprom@b,0 {
+ compatible = "eeprom";
+ reg = <0xb 0 0x1fff>;
+ };
+
+ };
+
+ alt-flash@6,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "intel,JS28F640", "cfi-flash";
+ reg = <0x6 0x0 0x800000>;
+ bank-width = <1>;
+ device-width = <1>;
+ partition@0x0 {
+ label = "space";
+ /* EF800000 -> EFF9FFFF */
+ reg = <0x00000000 0x007a0000>;
+ };
+ partition@0x7a0000 {
+ label = "bootloader";
+ /* EFFA0000 -> EFFFFFFF */
+ reg = <0x007a0000 0x00060000>;
+ read-only;
+ };
+ };
+
+
+ };
+};
+
+/include/ "sbc8548-post.dtsi"
diff --git a/arch/powerpc/boot/dts/sbc8548-post.dtsi b/arch/powerpc/boot/dts/sbc8548-post.dtsi
new file mode 100644
index 00000000000..33a47e27a11
--- /dev/null
+++ b/arch/powerpc/boot/dts/sbc8548-post.dtsi
@@ -0,0 +1,295 @@
+/*
+ * SBC8548 Device Tree Source
+ *
+ * Copyright 2007 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/{
+ soc8548@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0x00000000 0xe0000000 0x00100000>;
+ bus-frequency = <0>;
+ compatible = "simple-bus";
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8548-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <0x12 0x2>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8548-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <0x20>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupt-parent = <&mpic>;
+ interrupts = <0x10 0x2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@19 {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x6 0x1>;
+ reg = <0x19>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1a {
+ interrupt-parent = <&mpic>;
+ interrupts = <0x7 0x1>;
+ reg = <0x1a>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4500 0x100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <0x2a 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4600 0x100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <0x2a 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities reg
+ compatible = "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xfe>;
+ fsl,descriptor-types-mask = <0x12b0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+ };
+
+ pci0: pci@e0008000 {
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x01 (PCI-X slot) @66MHz */
+ 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <0x18 0x2>;
+ bus-range = <0 0>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
+ clock-frequency = <66000000>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe0008000 0x1000>;
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
+ };
+
+ pci1: pcie@e000a000 {
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ /* IDSEL 0x0 (PEX) */
+ 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <0x1a 0x2>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
+ clock-frequency = <33000000>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe000a000 0x1000>;
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0xa0000000
+ 0x02000000 0x0 0xa0000000
+ 0x0 0x10000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00800000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/sbc8548-pre.dtsi b/arch/powerpc/boot/dts/sbc8548-pre.dtsi
new file mode 100644
index 00000000000..d8c66290c5b
--- /dev/null
+++ b/arch/powerpc/boot/dts/sbc8548-pre.dtsi
@@ -0,0 +1,52 @@
+/*
+ * SBC8548 Device Tree Source
+ *
+ * Copyright 2007 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/{
+ model = "SBC8548";
+ compatible = "SBC8548";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8548@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <0x20>; // 32 bytes
+ i-cache-line-size = <0x20>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <0>; // From uboot
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+};
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 77be77116c2..1df2a095566 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -14,44 +14,9 @@
/dts-v1/;
-/ {
- model = "SBC8548";
- compatible = "SBC8548";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8548@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <0x20>; // 32 bytes
- i-cache-line-size = <0x20>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
+/include/ "sbc8548-pre.dtsi"
+/{
localbus@e0000000 {
#address-cells = <2>;
#size-cells = <1>;
@@ -63,23 +28,25 @@
0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/
0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/
0x5 0x0 0xf8000000 0x00b10000 /* EPLD */
- 0x6 0x0 0xfb800000 0x04000000>; /*64MB Flash*/
+ 0x6 0x0 0xec000000 0x04000000>; /*64MB Flash*/
flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "cfi-flash";
+ compatible = "intel,JS28F640", "cfi-flash";
reg = <0x0 0x0 0x800000>;
bank-width = <1>;
device-width = <1>;
partition@0x0 {
label = "space";
- reg = <0x00000000 0x00100000>;
+ /* FF800000 -> FFF9FFFF */
+ reg = <0x00000000 0x007a0000>;
};
- partition@0x100000 {
+ partition@0x7a0000 {
label = "bootloader";
- reg = <0x00100000 0x00700000>;
+ /* FFFA0000 -> FFFFFFFF */
+ reg = <0x007a0000 0x00060000>;
read-only;
};
};
@@ -122,307 +89,22 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0x6 0x0 0x04000000>;
- compatible = "cfi-flash";
+ compatible = "intel,JS28F128", "cfi-flash";
bank-width = <4>;
device-width = <1>;
partition@0x0 {
+ label = "space";
+ /* EC000000 -> EFEFFFFF */
+ reg = <0x00000000 0x03f00000>;
+ };
+ partition@0x03f00000 {
label = "bootloader";
- reg = <0x00000000 0x00100000>;
+ /* EFF00000 -> EFFFFFFF */
+ reg = <0x03f00000 0x00100000>;
read-only;
};
- partition@0x00100000 {
- label = "file-system";
- reg = <0x00100000 0x01f00000>;
- };
- partition@0x02000000 {
- label = "boot-config";
- reg = <0x02000000 0x00100000>;
- };
- partition@0x02100000 {
- label = "space";
- reg = <0x02100000 0x01f00000>;
- };
};
};
-
- soc8548@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- ranges = <0x00000000 0xe0000000 0x00100000>;
- bus-frequency = <0>;
- compatible = "simple-bus";
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8548-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8548-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <0x12 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8548-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <0x20>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <0x10 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@19 {
- interrupt-parent = <&mpic>;
- interrupts = <0x6 0x1>;
- reg = <0x19>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1a {
- interrupt-parent = <&mpic>;
- interrupts = <0x7 0x1>;
- reg = <0x1a>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <0x2a 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities reg
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
- };
-
- pci0: pci@e0008000 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x01 (PCI-X slot) @66MHz */
- 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
- bus-range = <0 0>;
- ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
- clock-frequency = <66000000>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
- };
-
- pci1: pcie@e000a000 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x0 (PEX) */
- 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <0x1a 0x2>;
- bus-range = <0x0 0xff>;
- ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
- clock-frequency = <33000000>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x02000000 0x0 0xa0000000
- 0x02000000 0x0 0xa0000000
- 0x0 0x10000000
-
- 0x01000000 0x0 0x00000000
- 0x01000000 0x0 0x00000000
- 0x0 0x00800000>;
- };
- };
};
+
+/include/ "sbc8548-post.dtsi"
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 14:50:31 +0000