diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/mach-omap2/omap_hwmod.c | 38 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/pm34xx.c | 44 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/prcm-common.h | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/prm2xxx_3xxx.c | 57 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/prm2xxx_3xxx.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/prm44xx.c | 63 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/prm44xx.h | 2 |
7 files changed, 162 insertions, 56 deletions
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 773193670ea..09f44d56e02 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -153,6 +153,7 @@ #include "prm44xx.h" #include "prminst44xx.h" #include "mux.h" +#include "pm.h" /* Maximum microseconds to wait for OMAP module to softreset */ #define MAX_MODULE_SOFTRESET_WAIT 10000 @@ -172,6 +173,9 @@ static LIST_HEAD(omap_hwmod_list); /* mpu_oh: used to add/remove MPU initiator from sleepdep list */ static struct omap_hwmod *mpu_oh; +/* io_chain_lock: used to serialize reconfigurations of the I/O chain */ +static DEFINE_SPINLOCK(io_chain_lock); + /* * linkspace: ptr to a buffer that struct omap_hwmod_link records are * allocated from - used to reduce the number of small memory @@ -1738,6 +1742,32 @@ static int _reset(struct omap_hwmod *oh) } /** + * _reconfigure_io_chain - clear any I/O chain wakeups and reconfigure chain + * + * Call the appropriate PRM function to clear any logged I/O chain + * wakeups and to reconfigure the chain. This apparently needs to be + * done upon every mux change. Since hwmods can be concurrently + * enabled and idled, hold a spinlock around the I/O chain + * reconfiguration sequence. No return value. + * + * XXX When the PRM code is moved to drivers, this function can be removed, + * as the PRM infrastructure should abstract this. + */ +static void _reconfigure_io_chain(void) +{ + unsigned long flags; + + spin_lock_irqsave(&io_chain_lock, flags); + + if (cpu_is_omap34xx() && omap3_has_io_chain_ctrl()) + omap3xxx_prm_reconfigure_io_chain(); + else if (cpu_is_omap44xx()) + omap44xx_prm_reconfigure_io_chain(); + + spin_unlock_irqrestore(&io_chain_lock, flags); +} + +/** * _enable - enable an omap_hwmod * @oh: struct omap_hwmod * * @@ -1793,8 +1823,10 @@ static int _enable(struct omap_hwmod *oh) /* Mux pins for device runtime if populated */ if (oh->mux && (!oh->mux->enabled || ((oh->_state == _HWMOD_STATE_IDLE) && - oh->mux->pads_dynamic))) + oh->mux->pads_dynamic))) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); + _reconfigure_io_chain(); + } _add_initiator_dep(oh, mpu_oh); @@ -1883,8 +1915,10 @@ static int _idle(struct omap_hwmod *oh) clkdm_hwmod_disable(oh->clkdm, oh); /* Mux pins for device idle if populated */ - if (oh->mux && oh->mux->pads_dynamic) + if (oh->mux && oh->mux->pads_dynamic) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); + _reconfigure_io_chain(); + } oh->_state = _HWMOD_STATE_IDLE; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 3a595e89972..e67d898433f 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -72,33 +72,6 @@ static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; static struct powerdomain *cam_pwrdm; -static void omap3_enable_io_chain(void) -{ - int timeout = 0; - - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); - /* Do a readback to assure write has been done */ - omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); - - while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) & - OMAP3430_ST_IO_CHAIN_MASK)) { - timeout++; - if (timeout > 1000) { - pr_err("Wake up daisy chain activation failed.\n"); - return; - } - omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, - WKUP_MOD, PM_WKEN); - } -} - -static void omap3_disable_io_chain(void) -{ - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); -} - static void omap3_core_save_context(void) { omap3_ctrl_save_padconf(); @@ -299,13 +272,6 @@ void omap_sram_idle(void) /* Enable IO-PAD and IO-CHAIN wakeups */ per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (omap3_has_io_wakeup() && - (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON)) { - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); - if (omap3_has_io_chain_ctrl()) - omap3_enable_io_chain(); - } pwrdm_pre_transition(); @@ -378,16 +344,6 @@ void omap_sram_idle(void) if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - /* Disable IO-PAD and IO-CHAIN wakeup */ - if (omap3_has_io_wakeup() && - (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON)) { - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, - PM_WKEN); - if (omap3_has_io_chain_ctrl()) - omap3_disable_io_chain(); - } - clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); } diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 6da3ba483ad..fca23cbea70 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -410,6 +410,14 @@ */ #define MAX_MODULE_HARDRESET_WAIT 10000 +/* + * Maximum time(us) it takes to output the signal WUCLKOUT of the last + * pad of the I/O ring after asserting WUCLKIN high. Tero measured + * the actual time at 7 to 8 microseconds on OMAP3 and 2 to 4 + * microseconds on OMAP4, so this timeout may be too high. + */ +#define MAX_IOPAD_LATCH_TIME 100 + # ifndef __ASSEMBLER__ extern void __iomem *prm_base; extern void __iomem *cm_base; diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 21cb74003a5..e10fd1e9446 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -302,17 +302,60 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) OMAP3_PRM_IRQENABLE_MPU_OFFSET); } -static int __init omap3xxx_prcm_init(void) +/** + * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain + * + * Clear any previously-latched I/O wakeup events and ensure that the + * I/O wakeup gates are aligned with the current mux settings. Works + * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then + * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No + * return value. + */ +void omap3xxx_prm_reconfigure_io_chain(void) +{ + int i = 0; + + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + + omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & + OMAP3430_ST_IO_CHAIN_MASK, + MAX_IOPAD_LATCH_TIME, i); + if (i == MAX_IOPAD_LATCH_TIME) + pr_warn("PRM: I/O chain clock line assertion timed out\n"); + + omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + + omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD, + PM_WKST); + + omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST); +} + +/** + * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches + * + * Activates the I/O wakeup event latches and allows events logged by + * those latches to signal a wakeup event to the PRCM. For I/O + * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux + * registers, and omap3xxx_prm_reconfigure_io_chain() must be called. + * No return value. + */ +static void __init omap3xxx_prm_enable_io_wakeup(void) { - int ret = 0; + if (omap3_has_io_wakeup()) + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, + PM_WKEN); +} +static int __init omap3xxx_prcm_init(void) +{ if (cpu_is_omap34xx()) { - ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - if (!ret) - irq_set_status_flags(omap_prcm_event_to_irq("io"), - IRQ_NOAUTOEN); + omap3xxx_prm_enable_io_wakeup(); + return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); } - return ret; + return 0; } subsys_initcall(omap3xxx_prcm_init); diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 70ac2a19dc5..a8c946f318a 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -303,6 +303,8 @@ extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift); +#endif /* CONFIG_ARCH_OMAP4 */ + /* OMAP3-specific VP functions */ u32 omap3_prm_vp_check_txdone(u8 vp_id); void omap3_prm_vp_clear_txdone(u8 vp_id); @@ -315,14 +317,14 @@ extern u32 omap3_prm_vcvp_read(u8 offset); extern void omap3_prm_vcvp_write(u32 val, u8 offset); extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); +extern void omap3xxx_prm_reconfigure_io_chain(void); + /* PRM interrupt-related functions */ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events); extern void omap3xxx_prm_ocp_barrier(void); extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask); extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); -#endif /* CONFIG_ARCH_OMAP4 */ - #endif /* diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index f106d21ff58..bb727c2d933 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -233,10 +233,71 @@ void omap44xx_prm_restore_irqen(u32 *saved_mask) OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); } +/** + * omap44xx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain + * + * Clear any previously-latched I/O wakeup events and ensure that the + * I/O wakeup gates are aligned with the current mux settings. Works + * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then + * deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted. + * No return value. XXX Are the final two steps necessary? + */ +void omap44xx_prm_reconfigure_io_chain(void) +{ + int i = 0; + + /* Trigger WUCLKIN enable */ + omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, + OMAP4430_WUCLK_CTRL_MASK, + OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET); + omap_test_timeout( + (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET) & + OMAP4430_WUCLK_STATUS_MASK) >> + OMAP4430_WUCLK_STATUS_SHIFT) == 1), + MAX_IOPAD_LATCH_TIME, i); + if (i == MAX_IOPAD_LATCH_TIME) + pr_warn("PRM: I/O chain clock line assertion timed out\n"); + + /* Trigger WUCLKIN disable */ + omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0, + OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET); + omap_test_timeout( + (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET) & + OMAP4430_WUCLK_STATUS_MASK) >> + OMAP4430_WUCLK_STATUS_SHIFT) == 0), + MAX_IOPAD_LATCH_TIME, i); + if (i == MAX_IOPAD_LATCH_TIME) + pr_warn("PRM: I/O chain clock line deassertion timed out\n"); + + return; +} + +/** + * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches + * + * Activates the I/O wakeup event latches and allows events logged by + * those latches to signal a wakeup event to the PRCM. For I/O wakeups + * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and + * omap44xx_prm_reconfigure_io_chain() must be called. No return value. + */ +static void __init omap44xx_prm_enable_io_wakeup(void) +{ + omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK, + OMAP4430_GLOBAL_WUEN_MASK, + OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_IO_PMCTRL_OFFSET); +} + static int __init omap4xxx_prcm_init(void) { - if (cpu_is_omap44xx()) + if (cpu_is_omap44xx()) { + omap44xx_prm_enable_io_wakeup(); return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); + } return 0; } subsys_initcall(omap4xxx_prcm_init); diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 7978092946d..ee72ae6bd8c 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -763,6 +763,8 @@ extern u32 omap4_prm_vcvp_read(u8 offset); extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); +extern void omap44xx_prm_reconfigure_io_chain(void); + /* PRM interrupt-related functions */ extern void omap44xx_prm_read_pending_irqs(unsigned long *events); extern void omap44xx_prm_ocp_barrier(void); |