summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/linux/nl80211.h16
-rw-r--r--include/net/cfg80211.h24
-rw-r--r--net/wireless/nl80211.c25
-rw-r--r--net/wireless/wext-sme.c2
4 files changed, 56 insertions, 11 deletions
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index ec1690da784..31603e8b558 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -295,7 +295,9 @@
* auth and assoc steps. For this, you need to specify the SSID in a
* %NL80211_ATTR_SSID attribute, and can optionally specify the association
* IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
- * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT.
+ * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
* It is also sent as an event, with the BSSID and response IEs when the
* connection is established or failed to be established. This can be
* determined by the STATUS_CODE attribute.
@@ -686,6 +688,15 @@ enum nl80211_commands {
* request, the driver will assume that the port is unauthorized until
* authorized by user space. Otherwise, port is marked authorized by
* default in station mode.
+ * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
+ * ethertype that will be used for key negotiation. It can be
+ * specified with the associate and connect commands. If it is not
+ * specified, the value defaults to 0x888E (PAE, 802.1X). This
+ * attribute is also used as a flag in the wiphy information to
+ * indicate that protocols other than PAE are supported.
+ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
+ * ethertype frames used for key negotiation must not be encrypted.
*
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
* We recommend using nested, driver-specific attributes within this.
@@ -951,6 +962,9 @@ enum nl80211_attrs {
NL80211_ATTR_RX_FRAME_TYPES,
NL80211_ATTR_FRAME_TYPE,
+ NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+ NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f2740537b5d..4c8c727d0cc 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -763,6 +763,10 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
* sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
* required to assume that the port is unauthorized until authorized by
* user space. Otherwise, port is marked authorized by default.
+ * @control_port_ethertype: the control port protocol that should be
+ * allowed through even on unauthorized ports
+ * @control_port_no_encrypt: TRUE to prevent encryption of control port
+ * protocol frames.
*/
struct cfg80211_crypto_settings {
u32 wpa_versions;
@@ -772,6 +776,8 @@ struct cfg80211_crypto_settings {
int n_akm_suites;
u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
bool control_port;
+ __be16 control_port_ethertype;
+ bool control_port_no_encrypt;
};
/**
@@ -1293,15 +1299,19 @@ struct cfg80211_ops {
* @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
* on a VLAN interface)
* @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
+ * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the
+ * control port protocol ethertype. The device also honours the
+ * control_port_no_encrypt flag.
*/
enum wiphy_flags {
- WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
- WIPHY_FLAG_STRICT_REGULATORY = BIT(1),
- WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2),
- WIPHY_FLAG_NETNS_OK = BIT(3),
- WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
- WIPHY_FLAG_4ADDR_AP = BIT(5),
- WIPHY_FLAG_4ADDR_STATION = BIT(6),
+ WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
+ WIPHY_FLAG_STRICT_REGULATORY = BIT(1),
+ WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2),
+ WIPHY_FLAG_NETNS_OK = BIT(3),
+ WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
+ WIPHY_FLAG_4ADDR_AP = BIT(5),
+ WIPHY_FLAG_4ADDR_STATION = BIT(6),
+ WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7),
};
struct mac_address {
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 49f5ca35e78..85a23de7bff 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -136,6 +136,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
.len = sizeof(struct nl80211_sta_flag_update),
},
[NL80211_ATTR_CONTROL_PORT] = { .type = NLA_FLAG },
+ [NL80211_ATTR_CONTROL_PORT_ETHERTYPE] = { .type = NLA_U16 },
+ [NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT] = { .type = NLA_FLAG },
[NL80211_ATTR_PRIVACY] = { .type = NLA_FLAG },
[NL80211_ATTR_CIPHER_SUITE_GROUP] = { .type = NLA_U32 },
[NL80211_ATTR_WPA_VERSIONS] = { .type = NLA_U32 },
@@ -474,6 +476,9 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
NLA_PUT_U8(msg, NL80211_ATTR_MAX_NUM_PMKIDS,
dev->wiphy.max_num_pmkids);
+ if (dev->wiphy.flags & WIPHY_FLAG_CONTROL_PORT_PROTOCOL)
+ NLA_PUT_FLAG(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE);
+
nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES);
if (!nl_modes)
goto nla_put_failure;
@@ -3691,7 +3696,8 @@ unlock_rtnl:
return err;
}
-static int nl80211_crypto_settings(struct genl_info *info,
+static int nl80211_crypto_settings(struct cfg80211_registered_device *rdev,
+ struct genl_info *info,
struct cfg80211_crypto_settings *settings,
int cipher_limit)
{
@@ -3699,6 +3705,19 @@ static int nl80211_crypto_settings(struct genl_info *info,
settings->control_port = info->attrs[NL80211_ATTR_CONTROL_PORT];
+ if (info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]) {
+ u16 proto;
+ proto = nla_get_u16(
+ info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]);
+ settings->control_port_ethertype = cpu_to_be16(proto);
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_CONTROL_PORT_PROTOCOL) &&
+ proto != ETH_P_PAE)
+ return -EINVAL;
+ if (info->attrs[NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT])
+ settings->control_port_no_encrypt = true;
+ } else
+ settings->control_port_ethertype = cpu_to_be16(ETH_P_PAE);
+
if (info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]) {
void *data;
int len, i;
@@ -3826,7 +3845,7 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
if (info->attrs[NL80211_ATTR_PREV_BSSID])
prev_bssid = nla_data(info->attrs[NL80211_ATTR_PREV_BSSID]);
- err = nl80211_crypto_settings(info, &crypto, 1);
+ err = nl80211_crypto_settings(rdev, info, &crypto, 1);
if (!err)
err = cfg80211_mlme_assoc(rdev, dev, chan, bssid, prev_bssid,
ssid, ssid_len, ie, ie_len, use_mfp,
@@ -4303,7 +4322,7 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
connect.privacy = info->attrs[NL80211_ATTR_PRIVACY];
- err = nl80211_crypto_settings(info, &connect.crypto,
+ err = nl80211_crypto_settings(rdev, info, &connect.crypto,
NL80211_MAX_NR_CIPHER_SUITES);
if (err)
return err;
diff --git a/net/wireless/wext-sme.c b/net/wireless/wext-sme.c
index 9818198add8..6fffe62d7c2 100644
--- a/net/wireless/wext-sme.c
+++ b/net/wireless/wext-sme.c
@@ -197,6 +197,8 @@ int cfg80211_mgd_wext_siwessid(struct net_device *dev,
wdev->wext.connect.ssid_len = len;
wdev->wext.connect.crypto.control_port = false;
+ wdev->wext.connect.crypto.control_port_ethertype =
+ cpu_to_be16(ETH_P_PAE);
err = cfg80211_mgd_wext_connect(rdev, wdev);
out: