diff options
| -rw-r--r-- | drivers/net/skge.c | 51 |
1 files changed, 30 insertions, 21 deletions
diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 7f8e8dd0fc6..0325fbceb35 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -2764,17 +2764,6 @@ static void skge_mac_parity(struct skge_hw *hw, int port) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE); } -static void skge_pci_clear(struct skge_hw *hw) -{ - u16 status; - - pci_read_config_word(hw->pdev, PCI_STATUS, &status); - skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - pci_write_config_word(hw->pdev, PCI_STATUS, - status | PCI_STATUS_ERROR_BITS); - skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); -} - static void skge_mac_intr(struct skge_hw *hw, int port) { if (hw->chip_id == CHIP_ID_GENESIS) @@ -2816,23 +2805,39 @@ static void skge_error_irq(struct skge_hw *hw) if (hwstatus & IS_M2_PAR_ERR) skge_mac_parity(hw, 1); - if (hwstatus & IS_R1_PAR_ERR) + if (hwstatus & IS_R1_PAR_ERR) { + printk(KERN_ERR PFX "%s: receive queue parity error\n", + hw->dev[0]->name); skge_write32(hw, B0_R1_CSR, CSR_IRQ_CL_P); + } - if (hwstatus & IS_R2_PAR_ERR) + if (hwstatus & IS_R2_PAR_ERR) { + printk(KERN_ERR PFX "%s: receive queue parity error\n", + hw->dev[1]->name); skge_write32(hw, B0_R2_CSR, CSR_IRQ_CL_P); + } if (hwstatus & (IS_IRQ_MST_ERR|IS_IRQ_STAT)) { - printk(KERN_ERR PFX "hardware error detected (status 0x%x)\n", - hwstatus); + u16 pci_status, pci_cmd; + + pci_read_config_word(hw->pdev, PCI_COMMAND, &pci_cmd); + pci_read_config_word(hw->pdev, PCI_STATUS, &pci_status); - skge_pci_clear(hw); + printk(KERN_ERR PFX "%s: PCI error cmd=%#x status=%#x\n", + pci_name(hw->pdev), pci_cmd, pci_status); + + /* Write the error bits back to clear them. */ + pci_status &= PCI_STATUS_ERROR_BITS; + skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + pci_write_config_word(hw->pdev, PCI_COMMAND, + pci_cmd | PCI_COMMAND_SERR | PCI_COMMAND_PARITY); + pci_write_config_word(hw->pdev, PCI_STATUS, pci_status); + skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); /* if error still set then just ignore it */ hwstatus = skge_read32(hw, B0_HWE_ISRC); if (hwstatus & IS_IRQ_STAT) { - pr_debug("IRQ status %x: still set ignoring hardware errors\n", - hwstatus); + printk(KERN_INFO PFX "unable to clear error (so ignoring them)\n"); hw->intr_mask &= ~IS_HW_ERR; } } @@ -2998,7 +3003,7 @@ static const char *skge_board_name(const struct skge_hw *hw) static int skge_reset(struct skge_hw *hw) { u32 reg; - u16 ctst; + u16 ctst, pci_status; u8 t8, mac_cfg, pmd_type, phy_type; int i; @@ -3009,8 +3014,13 @@ static int skge_reset(struct skge_hw *hw) skge_write8(hw, B0_CTST, CS_RST_CLR); /* clear PCI errors, if any */ - skge_pci_clear(hw); + skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + skge_write8(hw, B2_TST_CTRL2, 0); + pci_read_config_word(hw->pdev, PCI_STATUS, &pci_status); + pci_write_config_word(hw->pdev, PCI_STATUS, + pci_status | PCI_STATUS_ERROR_BITS); + skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); skge_write8(hw, B0_CTST, CS_MRST_CLR); /* restore CLK_RUN bits (for Yukon-Lite) */ @@ -3377,7 +3387,6 @@ static void __devexit skge_remove(struct pci_dev *pdev) skge_write32(hw, B0_IMSK, 0); skge_write16(hw, B0_LED, LED_STAT_OFF); - skge_pci_clear(hw); skge_write8(hw, B0_CTST, CS_RST_SET); tasklet_kill(&hw->ext_tasklet); |